Catalog Thera

Copyright © by thera 01/2009, Subject to change without prior notice

Page

Introductions DIN-rail Mounted

Single Phase Single Tariff DIN-rail Active Energy Meter TEMO15 – C Series , Register Counter Single Phase Single Tariff DIN-rail Active Energy Meter TEMO15s – C Series, LCD Display 03-04

Front Board Mounted

Power Analyzer (Power Meter) LCD Multifunction Network Power Monitor TPM230D – Build in MODBUS RTU Comm. Protocol

Electronic Active Energy Meter

thera Power & Electricity Meter

Catalog 2009

Single Phase Single Tariff DIN-rail Active Energy Meter TEMO15 – D Series, Register Counter 05-06 Single Phase Single Tariff DIN-rail Active Energy Meter TEMO11 – C Series, Register Counter 07-08 Single Phase Single Tariff DIN-rail Active Energy Meter TEMO11 – D Series, LCD Display 09-10 Single Phase Double Tariff DIN-rail Active Energy Meter TEMO31 – D Series, LCD Display 11-12 Single Phase Modbus RTU, DIN-rail Active Energy Meter TEMO35 – D Series, LCD Display 13-14 Three Phase, Single Tariff DIN-rail Active Energy Meter TEMO21 – C Series, Register Counter 15-16 Three Phase Single Tariff DIN-rail Active Energy Meter TEMO21 – D Series, LCD Display 17-18 Three Phase Double Tariff DIN-rail Active Energy Meter TEMO41 – D Series, LCD Display 19-20 Three Phase Modbus RTU, DIN-rail Active Energy Meter TEMO45 – D Series, LCD Display 21-22

Single Phase Single Tariff Front Board Active Energy Meter TEMO16 – C Series, Register Counter 25-26

Single Phase Single Tariff Front Board Active Energy Meter TEMO12 – D Series, LCD Display

27-28

Three Phase Single Tariff Front Board Active Energy Meter TEMO22 – D Series, LCD Display

29-30 Three Phase Double Tariff Front Board Active Energy Meter TEMO42 – D Series, LCD Display 31-32

Three Phase Prepayment Front Board Active Energy Meter TEMO91 – D/L Series, LED/LCD Display

33-34

Three Phase Prepayment Front Board Active Energy Meter TEM1O1 – D Series, LCD Display

35-36

Three Phase Multifunction, Modbus RTU, Active Energy Meter TEMO65 – D Series, LCD Display 23-24

Billing System Networks Software Billing System (Therasoft Eco), Module Concentrator (TMEX_ 16DI Series, and Converter 37-42

43-44

01-02

Contents

Please contact to: PT Trajumas Electric Telp: (021) 6828-4820 Fax : (021) 8563-739 www.trajumaselectric.co.cc

For more detail information

TEMO15-C

Single Phase Electronic Active Energy Meter

Model TEM015-C single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, I t adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. I t has its completely independent intellectual property rights and minimum size. It has already passed the test of the international authority KEMA. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step motor type impulse register.

• 35mm standard DIN rail installation, complying with standard DIN EN50022.

• Single pole width (Modulus 17.5mm), complying with standard DIN43880.

• Standard configuration 6+1 digits display (999999.1kWh) by step motor type impulse register.

• Standard configuration pulse output passive (polarity), May select distant pulse output passive (non polarity). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.

• Bicolor LED instructions power supply state (green) and signal of energy impulse (red).

• Automatic detection the direction of the flow of load current. And instructions (Only red energy impulse signal when working ,If no green instructions power supply, that is meaning the direction of the flow of load current reverse).

• Single direction measurement single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC

TEM015-C Series


Introductions Features

General Functions


Page

1 Catalog thera , 01/2009

®

DIN rail mounting Wide rage current measurement SO output Easy installation One modules (1DIN Module)

Accuracy Class 1.0

Light Weight & Good reliability

Application

Residential Shopping Center or Mall Apartment and Office Building Industries and Factory

Applications Network

Modbus RS485

Serial Converter USB/RS232/Ethernet to RS485

PC (PC Reader Meter)

Pulse Concentrator TMEX-16DI

TEM

015-

C

Convenient installation for any application as stand alone me-ter or for any meters use with Pulse Concentrator application:

TEM

015-

C

TEM

015-

C

Technical Specification: Model TEM015-C Connecting Mode Direct Connections

Accuracy Class Class 1.0

Reference Voltage (Un) 230V AC

Network 1 phase 2 wire

Operating Voltage 0.7 ~ 1.3 Un

AC Voltage withstand 2 KV for 1 minute

Impulse Voltage 6kV-1.2/50μS waveform

Rate Current (Ib) 5A,

Maximum Rates Current (Imax) 30A

Operating Current Range 0.2%Ib ~ Imax

Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA Operating Humidity Range <75%

Storage Humidity Range <95%

Operating Temperature Range -150 C ~ + 500 C

Storage Temperature Range -300 C ~ + 700 C

Pulse Output rate (meter constant) 2000 imp/kWh

Communication Pulse Output (Open Collector), Suitable to connect to BAS System

Display 6+1 Digits, Register Counter Display

Authority International Standard IEC / EN 62053-21, and DIN EN520022

Overall Dimensions (W x H x D) W: 18 mm x H: 90 mm x D: 58.5 mm ( 1 DIN Module)

thera ®

Power & Electricity Meters Page


* if you need different voltage or current specifications, please advisory our sales

Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A

Operating Current Range (A)

TEM015 - C4240 230 5(30) 0.2%Ib ~ Imax

Ordering code


Overall Dimension

1

3

L-IN

L-OUT

4

6

20

21

N

N

+

SO

-

Installation

TEMO15S-C

Single-phase Electronic Energy Meter

Model TEM015S-C single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has its completely independent intellectual property rights and minimum size. It has already passed the test of the interna-tional. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step motor type impulse

• 35mm standard DIN rail installation, complying with stan-dard DIN EN50022.

● Pole 1.5 width (Modulus 17.5mm), complying with stan-dard DIN43880.

● Standard configuration 6+1 digits display (999999.1kWh) by step motor type impulse register.

● Standard configuration pulse output passive (polarity), May select distant pulse output passive (non polarity). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.

● Two LED instructions power supply state (green) and signal of energy impulse (red).

● Automatic detection the direction of the flow of load current. And Instructions (Only red energy impulse signal when working, that is meaning the direction of the flow of load current reverse).

● Single direction measurement single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21.

● Directly connect and use ● Extension terminals cover, in order to protect to use safety.

TEM015S-C Series

DIN rail mounting

Wide rage current measurement

Pulse output (Open Collector)


Applications Features

General Functions

Easy installation

One modules (1.5 DIN Module)


Page


Accuracy Class 1.0

®



Modbus RS485


PC (PC Reader Meter) TEM

015s


TEM

015s

TEM

015s


Technical Specification: Model TEM015S-C Connecting Mode Direct Connections










Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA per phase Operating Humidity Range <75%






Display 6+1 Digits Register Counter

Authority International Standard IEC/EN 62053-21, DIN EN50022

Overall Dimensions (W x H x D) W: 26 mm x H: 90 mm x D: 58.5 mm( 1.5DIN, Module 17.5mm)

thera ®






TEM015S - CB250 230 10(63) 0.2%Ib ~ Imax

Ordering code


Overall Dimension

Installation

Single Phase Electronic Active Energy Meter With Backlight LCD Display

Model TEM015-D backlight single phase electronic DIN rail active energy meter adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has its completely independent intellectual property rights and minimum size. The meter completely accord with relevant technical require ments of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consump tion from single phase AC electricity net. This meter has green backlight source eight digits LCD displays shows the active energy consumption.It has following features:good reliability, small volume, light weight, specious nice appearance, convenient installation, etc


• Single pole width (Modulus 17.5mm), complying with standard DIN43880.

• It displays by Green backlight source eight digits LCD, users can choose setting 6+1 digits display.

• There is a maintenance-free lithium batteries in it, with a button and an ECP port., it use for displaying power cut reading, self-checking function and display the median choice.

• Users can cleared the total electricity counter, clearing operation with function of ECP and eight password double protection, users can set the password arbitrary.

• Standard configuration pulse output passive (polarity), May select distant pulse output passive (non polarity). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.

• Automatic detection the direction of the flow of load current. And instructions on LCD (when display HELP 1 on LCD, that is meaning the direction of the flow of load current reverse).

TEM015-D Series

DIN rail mounting Wide rage current measurement SO output



General Functions

Easy installation One modules (1DIN Module)


Page


Accuracy Class 1.0

®


Network

2-Wire RS485 Net

Serial Converter USB/RS232/Ethernet to

PC (Personal Computer) TEMO15D TEMO15D

Pulse Concentrator

Tmex-16DI

Application


TEMO15-D

Technical Specification: Model TEM015-D Connecting Mode Direct Connections

















Authority International Standard IEC61036, DIN EN50022

Overall Dimensions (W x H x D) W: 18 mm x H: 90 mm x D: 58.5 mm ( 1 DIN Module)

thera ®






TEM015 - D4240 230 5(30) 0.2%Ib ~ Imax

Ordering code


Overall Dimension

Installation

TEMO11-C

Single-phase Electronic Energy Meter

Model TEM011-C single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active en-ergy meter, it adopt micro-electronics technique, and im-ported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step motor type impulse register. It has following features: good reliabil-ity, small volume, light weight, specious nice appearance, convenient installation.

• 35mm standard DIN rail installation, complying with stan-dard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.

• Six pole width (Modulus 12.5mm), complying with stan-dard JB/T7121-1993.

• Standard configuration 5+1 digits display (99999.1kWh) by step motor and pulse machinery counter. May select 6+1 digits display (Product Configuration code is AK). Standard configuration one port of pulse output passive (polarity), May select increase a distant port of pulse out-put passive (no polarity), (Product Configuration code is AI). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.

• Bicolor LED instructions power state (green) and signal of power impulse (red).

• Standard configuration don’t detect direction of the trend of load current. May select Automatic Detecting the direc-tion of the trend of load current. And instructions (Only red power pulse signal when working, that is meaning the load current reverse).

TEM011-C Series

DIN rail mounting


SO output



General Functions

Easy installation

Four modules (4DIN Module)


Page


Accuracy Class 1.0

®



Modbus RS485




TEM011 TEM011 TEM011


Technical Specification: Model TEM011-C Connecting Mode Direct Connections







Rate Current (Ib) 5A, 10A, 20A

Maximum Rates Current (Imax) 30A, 65A, 100A






Pulse Output rate (meter constant) 3200, 1600, 800 imp/kWh




Overall Dimensions (W x H x D) W: 75 mm x H: 88 mm x D: 73 mm ( 4 DIN Module)

thera ®






TEM015 - CE210 230 20(100) 0.04%Ib ~ Imax TEM015 - CA220 230 10(65)A 0.04%Ib ~ Imax TEM011 - C4230 230 5(30)A 0.04%Ib ~ Imax

Ordering code


Overall Dimension

Installation

TEMO11- D

Single Phase Electronic Active Energy Meter

Model TEM011-D single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has seven digits LCD displays shows the active energy consumption. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.


• Six pole width (Modulus 12.5mm).

• Standard configuration 6+1 digits LCD display.

• Standard configuration Impulse output passive (polarity), May select distant impulse output passive (no polarity). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.

• Two LED instructions respectively power supply state (green) and signal of energy impulse (red).

• Standard configuration don’t detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions by an individual LED.

• Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21

TEM011-D Series


Introductions

General Functions


Page


®

Features

DIN rail mounting Wide rage current measurement SO output & RS485 (optional) Easy installation Four modules (4DIN Module)

Accuracy Class 1.0


Application



Modbus RS485




TEM011D TEM011D TEM011D

















Communication Pulse Output (Open Collector), & RS485 port (optional)

Display 6+1 Digits LCD Display



thera ®






TEM011 - DE210 230 20(100) 0.04%Ib ~ Imax TEM011 - DA220/D7220 230 10(65)A 0.04%Ib ~ Imax TEM011 - D4230 230 5(30)A 0.04%Ib ~ Imax

Ordering code


Overall Dimension

Installation

TEMO31- D

Single-phase Electronic Energy Meter Multi-rate (Double Tariff)

Model TEM031-D single phase electronic multi-rate DIN rail active energy meter is a kind of single phase two wire three tariffs (time-sharing billing) active energy meter, the meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in interna-tional standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has seven digits LCD dis-plays shows various consumption data and information. And there are far infrared and RS485 communication module in it. It is use for setting and reading the meter. Contact with all kind of AMR system conveniently. It has following features: good reliability, small volume, light weight, specious nice ap-pearance, convenient installation.


• four pole width (Modulus 18.5mm).

• Have three tariffs, may select 12 daily period of times. There are a clock and Maintenance-free backup lithium batteries in it. Battery capacity detection and display all the time. It can keep the electricity data for 12 months. The data can be kept forever after blackout.

• A port of pulse output passive (polarity), complying with standard IEC 62053-31.

• There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter.

• Seven LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the state rates just now and the data communi-cations state.

• Single direction measure single phase two wire active energy consumption. Complying with standard IEC 62053-21

TEM031-D Series

DIN rail mounting


Pulse output (SO)


Introduction Features

General Functions

Easy installation


RS485



Temo31D Temo31D Temo31D


Page

11Catalog thera , 01/2009

Accuracy Class 1.0

®


Network Application


RS485 and Infra Red port

Built-in Time Switch (settable)

Multi-rate or Double tariff

Residential Office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial Panel Telecommunications (BTS)

Application

Convenient installation for any application as stand alone me-ter or for any meters with Pulse or RS485 network application:
















Output Pulse Output (Open Collector), Suitable to connect to BAS System

Display 6+1 Digits LCD Display



Communication Port RS485 Modbus communications + Infra RED Port

thera ®






TEM031 - DE213 230 20(100) 0.04%Ib ~ Imax TEM031 - DA223 230 10(65)A 0.04%Ib ~ Imax TEM031 - D4233 230 5(30)A 0.04%Ib ~ Imax

Ordering code


Overall Dimension

Installation

TEMO35-D

Single-phase Electronic Energy Meter With Modbus RTU Communication Output ( Port RS485 )

New

New TEMO35-D Series is a DIN rail single phase two wire electronic energy meter with modbus communi-cation protocol. The total energy consumption is show-ing via 6+1 (7 digit) LCD displayed based on kWh and the data can be readable by isolated RS485 port also for other value measured data on internal modbus register memory can be readable from RS485 as for V, A, Hz, Cos Pi and VA. The meter is provided with a non-volatile memory system that ensures that the readings are not lost or altered when power off. With Modbus RTU protocol these meter configured as a slaves meter and will be easy to remote communication with other Modbus Master such BAS/AMR/SCADA or PLC to collect the active energy consumption data from dis-tance.

We have introduced a large scale of energy meters on the market suitable for 220/230V AC to 300V AC (50 or 60Hz). Although we produce the thera TEMO35D energy meter according to IEC / EN62053-21 and our quality inspection is very accurate. With wide range current measuring rated 10(100)A direct measuring.

TEM035-D Series

DIN-Rail mounting


SO (Pulse) output

RS485 MODBUS RTU communi-cation Protocol


Introduction Feature

General Specification

Convenient installation for any application as stand alone meter or for any meters with modbus RS485 network application:

Residential Modern office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial

Application

Easy installation

Seven modules ( 4 DIN )

2-Wire RS485 Net

Serial Converter USB/RS232/Ethernet

to RS485

PC (Modbus Master)

other Modbus device

TEMO35-D TEMO35-D TEMO35-D


Page


Accuracy Class 1.0

Easy setting on meter Via key-press:

Modbus-RS485 ID-Address device programming

Baud rate Programming

®

Technical Specification: Model TEM035-D

Connecting Mode Direct Connections Accuracy Class Class 1.0 Reference Voltage (Un) 220/230V AC


Operating Voltage 161/300 AC



Rate Current (Ib) 5A, 10A direct connection

Maximum Rates Current (Imax) 100A direct connection


Operating Frequency Range 50 Hz + 10%

Internal Power Consumption <2W/10VA

Operating Humidity Range <75%





CT Changing –Ratio NA

Data Communication port RS485 port with baud rate 4800,9600 bps user settable

Data Save The data can be stored more than 20 years when power off

Protocol MODBUS RTU with 16 bit CRC Address range 0-247 user settable

Display 7 Digit LCD Display ( 6 digit + 1 Decimal )

Authority International Standard IEC / EN62053-21, and DIN EN520022 Overall Dimensions (W x H x D) W: 75.50 mm x H: 88.00 mm x D: 73.08 mm (4 DIN Module)


Page

14

thera ®

Power & Electricity Meters

Catalog thera , 01/2009


Ordering code Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A Operating Current Range (A) TEM035 - DA241 230 10(60)A 0.04%Ib ~ Imax TEM035 - DC241 230 10(100)A 0.04%Ib ~ Imax

Installation Overall Dimension

SO

485/CMbus

-

+

-

+

5

L

6

7

N

8

L

N

1

2

3

4

L/L Phase line IN/OUT N/N Neutral line IN/OUT 5 and 6 Test pulse output contract 7 and 8 Modbus RS485 communications

Height 88.00 mm Weight 75.50 mm Depth 73.08 mm

TEMO21- C

Three Phase Electronic Active Energy Meter

Model TEM021 three phase four wire electronic DIN rail active energy meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. It can display total energy consumption by step motor type impulse register. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc


• Ten pole width (Modulus 12.5mm).

• Standard configuration 6 digits display (999999kWh) by step motor type impulse register.

• There are a polarity port of pulse output passive closed and a non polarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.

• Five LED instructions respectively every power supply state and signal of closed energy impulse and distant energy impulse.

• Automatic detection the direction of the flow of load current.

• Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.

TEM021-C Series


Introductions

General Functions


Page


®

Features

DIN rail mounting Wide rage current measurement SO output Easy installation Seven modules (7DIN Module)

Accuracy Class 1.0


Application

Residential Shopping Center or Mall Apartment, Hotel & Office Building Industries and Factory


Modbus RS485




TEM021-C TEM021-C TEM021-C


Technical Specification: Model TEM021-C Connecting Mode Direct Connections or CT Connections


Reference Voltage (Un) 3X230/400V AC (3~) Network 3 phase 4 wire

Operating Voltage 161/279-300/520V AC (3~) AC Voltage withstand 2 KV for 1 minute


Rate Current (Ib) 1.5A via CT or 5A, 10A direct connection

Maximum Rates Current (Imax) 6 A Via CT or 100A direct connection

Operating Current Range 0.2%Ib ~ Imax Via CT or 0.5%Ib ~ Imax for Direct Connections





Pulse Output rate (meter constant) 1600 imp/kWh for CT and 160 imp/kWh for direct connection


Display 5+1 Digits Register Counter Display


Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7DIN Module )

thera ®






TEM021 - C8500 3x230/400 10(100) 0.04%Ib ~ Imax TEM021 - C7500 3x230/400 10(100)A 0.04%Ib ~ Imax

TEM021 - C0520 3x230/400 CT/5A 0.04%Ib ~ Imax TEM021 - C0520 3x230/400 5(100)A 0.04%Ib ~ Imax

Ordering code


Direct Connections

Overall Dimension

Installation CT Connections

TEMO21D

Three Phase Electronic Active Energy Meter

Model TEM021-D three phase four wire electronic DIN rail ac-tive energy meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. It can display total energy consumption by step motor type impulse register. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc


• Ten pole width (Modulus 12.5mm).

• Standard configuration 6 digits display (999999kWh) by step motor type impulse register.

• There are a polarity port of pulse output passive closed and a non polarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.

• Five LED instructions respectively every power supply state and signal of closed energy impulse and distant energy impulse.

• Automatic detection the direction of the flow of load current.

• Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.

TEM021-D Series


Introductions

General Functions


Page


®

DIN rail mounting Wide rage current measurement SO output

Features

Easy installation Seven modules (7DIN Module)

Accuracy Class 1.0


Applications



Modbus RS485




TEM021-D TEM021-D TEM021-D


Technical Specification: Model TEM021-LCD Display Connecting Mode Direct Connections or CT Connections





Basic Rate Current (Ib) 5A, 10A direct connection

Maximum Rates Current (Imax) Via CT/5A or 100A direct connection







Pulse Output Pulse Output (Open Collector), Suitable to connect to BAS System

Display 7 Digits LCD Display

Authority International Standard IEC62053-21, DIN EN50022

Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7 DIN Module )

Export SO ( Add. Pulse output ) SO 100 imp/kWh for CT and SO 10 imp/kWh

thera ®






TEM021 - D05C0 3x230/400 CT/5A 0.04%Ib ~ Imax TEM021 - D85G0 3x230/400 5(100)A 0.04%Ib ~ Imax TEM021 - DC5G0 3x230/400 10(100)A 0.04%Ib ~ Imax

Ordering code


Direct Connections

Overall Dimension

Installation CT Connections

TEMO41- D

Three Phase Electronic Active Energy Meter Multi-rate (Double Tariff)

Model TEM041 Series three phase four wire electronic multi-rate DIN rail active energy meter is a kind of three phase four wire three tariffs (time-sharing billing) active energy meter, the meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. This meter has seven digits LCD displays shows various consumption data and information. And there are far infrared and RS485 communication module in it. It is use for setting and reading the meter. Contact with all kind of AMR system conveniently. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient


• Ten pole width (Modulus 12.5mm), complying with standard JB/T7121-1993

• Have three tariffs, may select 12 daily period of times. You can set the date arbitrary which can automatic read the meter every month. May select single tariff function in weekend. (Please specified when ordering).

• There are a clock and Maintenance-free backup lithium batteries in it. Battery capacity detection and display all the time. It can keep the electricity data for 12 months. The data can be kept forever after blackout.

• There are a polarity port of pulse output passive closed and a no polarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select), Complying with standard IEC 62053-31 and DIN 43864.

• There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter.

• Ten LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the tariff state just now and the data communications state.

TEM041-D Series


Introductions

General Functions


Page


®

Features

Network

2-Wire ModbusNet

Serial Converter RS485/RS323

PC (Personal Computer)

TEMO41-D

Pulse Concentrator

Tmex-16DI

TEMO41-D TEMO41-D

2-Wire RS485Net

Pulse Modbus Net RS485 Net

Use possibility:

DIN rail mounting


Pulse output (SO)

Easy installation


Accuracy Class 1.0


RS485 and Infra Red port

Built-in Time Switch (settable)

Multi-rate or Double tariff

Application

Residential Office/Commercial Building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial Panel Telecommunications (BTS)

Technical Specification: Model TEM041- D Series Connecting Mode Direct Connections or CT Connections





Rate Current (Ib) CT or 5A, 10A direct connection

Maximum Rates Current (Imax) Via CT or 100A direct connection








Display 6+1 Digits Register LCD Display


Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7DIN Module )

Communication Port RS485 Modbus communications and far Infrared port

thera ®






TEM041 - D0523 3x230/400 CT/5A 0.04%Ib ~ Imax TEM041 - D7523 3x230/400 5(100)A 0.04%Ib TEM041 - D8503 3x230/400 10(100)A 0.04%Ib ~ Imax

Ordering code


Installation Direct Connections CT Connections

Overall Dimension

TEMO45-D

Three-phase Electronic Energy Meter With Modbus RTU Communication Output ( Port RS485 )

New

New TEMO45-D Series is a DIN rail three phase four wire electronic energy meter with modbus communi-cation protocol. The total energy consumption is show-ing via 6+1 (7 digit) LCD displayed based on kWh and the data can be readable by isolated RS485 port also for other value measured data on internal modbus register memory can be readable from RS485 as for V, A, Hz, Cos Pi and VA. The meter is provided with a non-volatile memory system that ensures that the readings are not lost or altered when power off. With Modbus RTU protocol these meter configured as a slaves meter and will be easy to remote communication with other Modbus Master such BAS/AMR/SCADA or PLC to collect the active energy consumption data from dis-tance.

We have introduced a large scale of energy meters on the market suitable for 3 x 220V AC to 380V AC (50 or 60Hz). Although we produce the thera TEMO45D energy meter according to IEC / EN62053-21 and our quality inspection is very accurate. With wide range current measuring rated 3 x 10(100)A direct measuring or direct reading Programmable CT ratio from 5/5A to 5000/5A.

TEM045-D Series

DIN-Rail mounting


SO (Pulse) output





Convenient installation for any application as stand alone meter or for any meters with modbus RS485 network application:


Application

Easy installation


2-Wire RS485 Net


to RS485

PC (Modbus Master)

other Modbus device



Programmable CT Ratio from 5/5A to 5000/5A

Page


Accuracy Class 1.0

CT Ratio Programming


Modbus-RS485 ID-Address device programming


®


Connecting Mode Direct Connections or CT (with current transformer) Accuracy Class Class 1.0 Reference Voltage (Un) 3x220/380V AC (3~)


Operating Voltage 161/279-380/400 AC (3~)



Rate Current (Ib) 5A, 10A direct connection

Maximum Rates Current (Imax) 100A direct connection or CT/5A



Internal Power Consumption <2W/10VA per phase






CT Changing –Ratio Fully Programmable CT Ratio 5/5A to 5000/5A





Authority International Standard IEC / EN62053-21, and DIN EN520022 Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7 DIN Module)


Page

22

thera ®



1 Ua In 3 Ub In 5 Uc In N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port L1/L1 Ia IN/OUT L2/L2 Ib IN/OUT L3/L3 Ic IN/OUT

L1/L1 Ua In/Out L2/L2 Ub In/Out L3/L3 Uc In/Out N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port


Overall Dimension

Dimension : W : 126 mm x H: 130 mm x D: 65 mm

Ordering code Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A Operating Current Range (A) TEM045 - D0523 3 x 230/400 3 x CT/ 5A 0.04%Ib ~ Imax TEM045 - DC573 3 x 230/400 3 x 10(100)A 0.04%Ib ~ Imax

Installation

Direct Connections

CT Connections

N

L3

L2

L1

12

11so

16

15485/CMbus

+

-

N

L3

L2

L1 Ua

Ub

Uc

Un

+

-

L3

L2

L1

12

11so

16

15485/CMbus

+

-

L3

L2

L1 Ia+

Ib+

Ic+

NN Un

1

3

5

Ua

Ub

Uc

Ia-

Ib-

Ic-

+

-

TEMO65-D

Three-phase Electronic Multi-rate Energy Meter With Modbus RTU Communication Output (Port RS485)

New

New TEMO65-D Series is a DIN rail three phase four wire electronic Multi-rate energy meter with modbus RTU communication protocol. The total energy consump-tion is showing via 6+1 (7 digit) LCD displayed based on kWh the data can be readable by isolated RS485 port also for other value measured data on internal modbus register memory can be readable from RS485 as for kWh, Kvarh, V, A, Hz, PF, W and VA. The meter is provided with a non-volatile memory system that en-sures that the readings are not lost or altered when power off. With Modbus RTU protocol these meter configured as a slaves meter and will be easy to remote communication with other Modbus Master such BAS/AMR/SCADA or PLC to collect the energy consumption data from distance.

We have introduced a large scale of energy meters on the market suitable for 3 x 220V AC to 380V AC (50 or 60Hz). Although we produce the thera TEMO45D energy meter according to IEC / EN62053-21 and our quality inspection is very accurate. With wide range current measuring rated 3 x 10(100)A direct measuring or direct reading Programmable CT ratio from 5/5A to 5000/5A.

TEM065-D Series

DIN-Rail mounting


Build-in SO (Pulse) output





Convenient installation for any application as stand alone meter or for any meters with modbus RTU(RS485) network application as for:


Application

Easy installation


Modbus RTU


to RS485

PC (Modbus Master)

other Modbus device


Programmable CT Ratio from 5/5A to 5000/5A

Page


Accuracy Class 1.0

CT Ratio Programming


Modbus RTU ID-Address device programming


®

Multi-Tariff functions (4 tariff)


Connecting Mode Direct Connections or CT (with current transformer) Accuracy Class Class 1.0 Reference Voltage (Un) 3x220/380V AC (3~)


Operating Voltage 161/279-380/400 AC (3~)



Rate Current (Ib) 10A Basic Current

Maximum Rates Current (Imax) 60A, 100A direct connection or with external CT/5A



Internal Power Consumption <2W/10VA per phase






CT Changing –Ratio Fully Programmable CT Ratio 5/5A to 5000/5A





Authority International Standard IEC / EN62053-21, and DIN EN520022 Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7 DIN Module)


Page

24

thera ®



1 Ua In 3 Ub In 5 Uc In N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port L1/L1 Ia IN/OUT L2/L2 Ib IN/OUT L3/L3 Ic IN/OUT

L1/L1 Ua In/Out L2/L2 Ub In/Out L3/L3 Uc In/Out N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port


Overall Dimension

Dimension : W : 126 mm x H: 130 mm x D: 65 mm

Ordering code Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A Operating Current Range (A) TEM065 - D0481 3 x 230/400 3 x CT/ 5A 0.04%Ib ~ Imax TEM065 - DC481 3 x 230/400 3 x 10(100)A 0.04%Ib ~ Imax

Installation

Direct Connections

CT Connections

NL3L2L1

12

11 so

16

15485/ CMbus

+

-

NL3L2L1 Ua

UbUcUn

+

-

L3

L2

L1

12

11 so

16

15485/ CMbus

+

-

L3

L2

L1 I a+

I b+

I c+NN Un

1

3

5

Ua

Ub

Uc

I a-

I b-

I c-

+

-

TEMO16

Single Phase Electronic Active Energy Meter Front Board Installed

Model TEM016 single phase electronic front board installed active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21 and SPLN D3.005-1 : 2008. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it is use for setting indoor or outdoor and it can display total energy consumption by step motor type impulse regis-ter. It has following features: good reliability, light weight, specious nice appearance, convenient installation.

• Front board three fixed holes installation, the cover is made of high definition transparent glass material molded overall, the base of the is made of steel and anti-rust, meter and the terminal block is made of quality bakelite material which is moisture-resistant, fire-retardant, high temperature molded overall. It has following features: Good weather ability, high rigid, specious appearance, etc.

• Standard configuration 5+1 digits display (99999.1kWh) by step motor and pulse machinery counter.

• Standard configuration one port of pulse output passive (polarity) May select increase a distant port of pulse output passive (no polarity). And contact with all kind of AMR system conveniently complying with standard IEC 62053-31 and DIN 43864.

• Standard configuration three LED instructions, power state (green), signal of power impulse (yellow) and auto-matic detection of Anti-Tampering (red).

• Single direction two component measure single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21.

• Automatic detect current of phase line and neutral line when the two current error will automatic show the fault signal.

• Extended cover and base plate MCB compatible (Compact), in order to protect to use electricity safety.

TEM016 – Series

Front Board/Wall Mounting


Pulse output (kWh)



General Functions

Easy installation

Anti—Tamper


Page


Accuracy Class 1.0

®


High definition transparent glass Material cover.

Steel & anti-rust body case

Application

Residential Segment

Commercial Segment

Technical Specification: Model TEM016 - Series Connecting Mode Direct Connections


Reference Voltage (Un) 230V AC Network 1 phase 2 wire

Operating Voltage 168-300V AC AC Voltage withstand 4 KV for 1 minute


Rates Current Ib(Imax) 5 (60)A, direct connection

Starting Current Range 0.004Ib, direct connection

Operating Current Range 0.05Ib ~ Imax , direct connection







Display 5+1 Digits Register Counter Display

Authority International Standard IEC61053-21; SPLN D3.005-1:2008

Overall Dimensions (W x H x D) W: 142.5 mm x H: 211 mm x D: 67 mm

Indicator Three Color LED (Power:green, pulse rate:yellow, & Anti Tamper with red LED color)

thera ®




Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A Starting Current Range (A)

TEM016 - C3230 230 5(60)A 0.004Ib (Direct)

Ordering code


Installation

Overall Dimension

TEMO91– L

Single-Phase Prepayment Electronic Energy Meter Front Board Installed

Model TEM091- L series single phase electronic prepayment front board installed active energy meter is a kind of single phase two wire active energy meter which purchase electricity by IC card, electric energy measuring, load control and using electricity management. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it is use for setting indoor or out door meter box. This meter has LED display shows power. It has following features: good reliability, light weight, specious nice appearance, convenient installation, etc.

• Standard configuration one meter one card, can repeat input money from PC machinery which with IC programmer, may select one-time recharge card. (Please specified when ordering).

• It has IC card with code and data against false, standard configuration use storage IC card.

• Standard configuration payment by kWh, may select payment by money. It has load control and function of automatic fault detection and instructions, standard configuration without function of open terminals cover and detection.

• A port of pulse output passive closed (polarity), complying with standard IEC 62053-31 and standard DIN 43864.

• Two LED instructions signal of energy impulse (red) and direction of the flow of load current (yellow).

• Automatic detection the direction of the flow of load current. When the yellow LED display, that is meaning the direction of the flow of load current reverse.

• Single direction single component measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.

TEM091- L Series



SO output



General Functions

Easy installation

Smart IC Card

Vending Card RS232 (COM)

Prepaid Management Software (PC) TEM091L/D TEM091L/D


Page


Accuracy Class 1.0

®


Applications

• Residential • Office/Commercial

building • Shopping Center (Mall)

Card Card

Accessories

Vending Software

Technical Specification: Model TEM091-L Series Connecting Mode Direct Connections


Reference Voltage (Un) 230 VAC Network 1 phase 2 wire

Operating Voltage 161~279/300 AC AC Voltage withstand 4 KV for 1 minute


Rate Current (Ib) 5A, 10A , 20A direct connection

Maximum Rates Current (Imax) 30A, 40A, 100A direct connection








Display 6+1 Digits Register LCD Display & 5+1 Digits for LED Display

Authority International Standard IEC61053-21

Overall Dimensions (W x H x D) W: 110 mm x H: 201 mm x D: 68 mm

thera ®






TEM091 - L4230 230 Vac 5(20)A 0.04%Ib ~ Imax TEM091 - LA220 230 Vac 10(40)A 0.04%Ib ~ Imax TEM091 - LE210 230 VaC 20(100)A 0.04%Ib ~ Imax

Ordering code


Installation

Overall Dimension

TEM1O1– L

Three Phase Prepayment Electronic Active Energy Meter Front Board Installed

Model TEM101-L three phase four wire electronic prepayment front board installed active energy meter is a kind of three phase four wire active energy meter which purchase elec-tricity by IC card, electric energy measuring, load control and using electricity management. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net, it is use for setting indoor or out door meter box. This meter has LED display shows power. It has following features: good reliability, light weight, specious nice appear-ance, convenient installation, etc.

• It support repeat recharge and one-time recharge from IC programmer and PC machinery online at the same time.

• The IC card use logic and encryption, with code and data against false.

• Standard configuration payment by kWh, may select payment by money

• It has load control and function of automatic fault detection and instructions, standard configuration without function of open terminals cover and detection, may select open terminals cover and cut power.

• 6 LED digits display, 5+1 digits display (99999.1kWh), may select 7 LCD digits display.

• A port of pulse output passive closed (polarity), complying with standard IEC 62053-31 and standard DIN 43864.

• Five LED instructions power supply state, signal of energy impulse and direction of the flow of load current.

• Automatic detection the direction of the flow of load current. When the yellow LED display, that is meaning the direction of the flow of load current reverse.

• Single direction three component measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.

TEM101– L Series



SO output



General Functions

Easy installation

Smart IC Card


Page


Accuracy Class 1.0

®


PC Management Software

Application

TEM

101

Vending Machine RS232COM

TEM

101

CARD CARD

Technical Specification: Model TEM101-L Series Connecting Mode Direct Connections


Reference Voltage (Un) 3x230/400V AC Network 3 phase 4 wire

Operating Voltage 161/279-300/520V AC AC Voltage withstand 4 KV for 1 minute


Rate Current (Ib) 5A, 10A , 20A direct connection

Maximum Rates Current (Imax) 30A, 40A, 100A direct connection








Display 7 Digits Register LCD Display

Authority International Standard IEC61053-21

Overall Dimensions (W x H x D) W: 145 mm x H: 218 mm x D: 73 mm

-

thera ®






TEM101 - L3520 3x230/400 5(25)A 0.04%Ib ~ Imax TEM101 - L7500 3x230/400 10(50)A 0.04%Ib ~ Imax TEM101 - LC500 3x230/400 15(90)A 0.04%Ib ~ Imax

Ordering code


Overall Dimension

Installation

Therasoft Eco

Eco Energy Management Software & Control Remote Energy Supervision Of Low and Medium Voltage Networks

New

Therasoft is an economical energy management software, which can be redesigned as a customize software of the customer project requirements. The continuous increase of energy costs together with the possibility to select the most suitable contract among different energy providers make more and more convenient a supervisory system able to ensure a continuous monitoring of power consumption and energy costs of low and medium voltage networks. Thanks to Therasoft software, it has been possible to develop many supervisory applications able to provide both the continuous monitoring of the electrical network and the possibility to increase the overall efficiency. Therasoft includes a series of internal objects especially designed to display electrical schemes and cabinets, to monitor power consumption, to calculate energy costs using both real or simulated calendars with different fares according to date and time. Display of electrical schemes with animated switches and lines changing colour according to current path allow highlighting of energy flows, quick spotting of abnormal operation and prevention of possible power overflow. Monitoring of power consumption and energy costs of single user lines and of the overall network in the form of daily, monthly and yearly bar charts provide an ideal report for analysis and optimization of the electrical network; the possibility to program the yearly calendar with different fares according to date and time is an essential tool to prepare a budget plan and select the contract more suitable for anyone’s requirements.

THERASOFT

MODBUS RTU communication

Multi-pages Monitoring system

Reports accessible from Excel, Access, etc.



Therasoft suitable for any application for remote supervisory as small meter network or for large s meters network application as for :


Application

Graphics & Chart Monitoring

On-line Energy Electronic Billing


Page


TCP/IP Client Server support

Special applications as on customers request:

Status Alarm, Device & Status

Historical Alarm & Change User

®

GSM Network (optional on re-quested)

Energy Max-demand Limiter

Automatic Meter Reading

Remote Energy Billing system

Minimum Configuration:

Model THERASOFT Eco

Platform Personal Computer (PC)

Operating System Window 2000 & XP Compatible

CPU Processor Pentium IV or Higher

Memory RAM 128 MB RAM or Higher

Hard disk Drive 40 GByte

Communication Port RS232, RS485 or Ethernet Port

* if you need different applications or as your specifications required, please advisory our sales

Page

38

thera ®



Modbus 2-Wire RS485 Net


to RS485 PC (Therasoft Eco)

other Modbus device



Ordering code Type / Order No. Version (V) Capacity (Point) Description TSOFT - ECO256 Standard 256 — 512 Eco Energy Management TSOFT - ECOZXX Customize On Request On request ( OEM )

Energy Network Application Example

Associate Product TEMO35 Energy Meter

TEMO45 Energy Meter

TEMO65 Multifunction Meter

TEMO65 Power Monitor

TIMEX 306-256 Data Concentrator

TIMEX16 Data Concentrator

TEMO31-D

Pulse Concentrator Tmex-16DI

Pulse Modbus Net

Use possibility:

TPM230D TEMO35-D

TEMO11-C TEMO15-D

Tmex-306/256 Pulse Concentrator Expandable

TEMO21-C TEMO41-C

Modbus RTU Net, RS485/2-wire

Serial Converter USB/RS232/

Ethernet to RS485

AMR Software & Billing (Remote PC)

TMEX-16DIP

Pulse Data Concentrator 16 Channel With Modbus RTU Protocol RS485/2-wire Communication

These TMEX-16DIP Series are used to interface energy count-ers (both single-phase and three phase) provided with pulses output, with PC's, PLC's and acquisitions systems using a se-rial RS485 interface and ModBus RTU Protocol. It is therefore possible to setup a telemetering system composed of up to 128 Device (connected between them with a simple twisted pair wire of maximum length 1200 M). Each one of them to receive the counting pulses of up to 16 maximum of energy counters. By this system it is possible to obtain the energy count of each counter, using only once RS485 interface, and without the need of as many digitals inputs as the number of the existing energy counters. To leap the transmitted values equal to those actually displayed on the counters, or to per-form partial energy counting, the concentrators counting reg-isters can be preset to desired value or reset to zero, In addi-tion, the registers are saved approx every time in a non-volatile memory, in order to prevent data loses in case of power supply failure.

A new line of Modbus based Data Concentrator modules for data acquisition and other applications are available now. These modules offer good realibility, low cost solution for dis-tributed pulse inputs applications, They are portable, easy integrated with existing Modbus network, and simple to use for end users. Various types of module are available for differ-ent kinds of requirements. All modules have LED indications for visualization of Input status (Digital) and fault diagnostic analisys some models with high isolation among inputs are also available for special applications. With Modbus RTU pro-tocol these data concentrator modules configured as slaves will be easy to communicate with Modbus master such as BAS/SCADA/PLC/HMI. The Central modules have 2 wire RS485 interface with RTU protocol.

TMEX – 16DIP Series

DIN Rail Mounting

Easy Modbus RTU Addressable up to 128 Device Address

Up to 16 Pulse Input per device



General Functions

Easy installation


Page


Compact & Small Size!

®


Application

Modern office/Commercial

Shopping Center (Mall)

Multi Tenant Apartment

Factory & Industrial

House/Residential rent

Installation note Convenient installation for any application as stand alone data concentrator or for any divice with Modbus-RTU RS485 net-work application:

TMEX 16 Module

TEM

015

Pulse Output Meter

TMEX 16 Module

TEM

015

Pulse Output Meter

To other Modbus Device

The pulse input can be collect from energy meter , water meter or gas meters, as for application below

Technical Specification:

Model TMEX-16DIP

Power Supply 12 ~ 24 Vdc

Pulse Digital Input Central Module

• Input Points 16 Input • Input Voltage Range 12~24 Vdc

• Input Current per Input 5mA @12Vdc and 11mA @24Vdc Counters register Internal Memory

• Inputs max 16 points Maximum

• Resolution 32 Bits

• frequency 1 KHz (max)

• Pulse Width 500 us (min)

Temperature

• Operating Temperature 0oC ~ 55oC

• Storage Temperature -20oC ~ 85oC

Terminal Connectors type Screw Type Terminal

• Logic Power and Com. 4 Pin screw type terminal on bottom side of unit

• Inputs terminal & Comm. 18 Pin screw type terminal on front

Communication Port Address able Slave 0 ~ 127 device (user settable)

• Protocol Network Modbus RTU - RS485/2-Wire

• Data Communication P:None, Data:8, Stop-bit:1

• Baud Rate (bps) 2400,4800,9600,19200 & 38400 Default : 9600 bps

Status Indicator Red LED for Power, TX/RX–Rs485 & Pulse Input

Dimensions (W x H x D) mm 22.6 x 109.0 x 97.5 mm

thera ®



* You can select to configure the concentrator address device from 0 up to 127 slave as per your required

Ordering code


Installation Overall Dimension

Type / Order No. Voltage (V) Pulse Input (point) Module Description

TMEX-16DIP 12~24 VDC 16 x DI 12~24Vdc 16 Pulse Input Module

Pulse(+)

Pulse(-)

TEMO15

+12~24Vdc PS

To Input Module kWh

Indicator

Pulse Input Contact from meters

DIP Switch for slave Device Addressable

Meter Conenction Sample

Modbus RTU Net, RS485/2-wire

Serial Converter USB/RS232/

Ethernet to RS485

AMR Software & Billing (Remote PC)

TMEX-16DI

Expandable Pulse Data Concentrator With Modbus RTU Protocol RS485/2-wire Communication

These TMEX-16DI Series are used to interface energy count-ers (both single-phase and three phase) provided with pulses output, with PC's, PLC's and acquisitions systems using a se-rial RS485 interface and ModBus RTU Protocol. It is therefore possible to setup a telemetering system composed of up to 31 Device (connected between them with a simple twisted pair wire of maximum length 1200 M). Each one of them to receive the counting pulses of up to 78 maximum of energy counters. By this system it is possible to obtain the energy count of each counter, using only once RS485 interface, and without the need of as many digitals inputs as the number of the existing energy counters. To leap the transmitted values equal to those actually displayed on the counters, or to per-form partial energy counting, the concentrators counting reg-isters can be preset to desired value or reset to zero, In addi-tion, the registers are saved approx every time in a non-volatile memory, in order to prevent data loses in case of power supply failure.

A new line of Modbus based Data Concentrator modules for data acquisition and other applications are available now. These modules offer good realibility, low cost solution for dis-tributed pulse inputs applications, They are portable, easy integrated with existing Modbus network, and simple to use for end users. Various types of module are available for differ-ent kinds of requirements. All modules have LED indications for visualization of Input status (Digital) and fault diagnostic analisys some models with high isolation among inputs are also available for special applications. With Modbus RTU pro-tocol these data concentrator modules configured as slaves will be easy to communicate with Modbus master such as PC/SCADA/PLC/HMI. The Central modules have 2 wire RS485 interface with RTU protocol.

TMEX – 16DI Series

DIN Rail & Wall Mounting type

Wide Range Voltage Input

Up to 78 Pulse Input per device



General Functions

Easy installation

Modbus RTU Protocol (32 slave)


Page


Compact & Expandable !

®


Included Real time Clock and Double tariff function (optional)

Internal pulse divider

Application

Modern office/Commercial

Shopping Center (Mall)

Multi Tenant Apartment

Factory & Industrial

House/Residential rent

Installation note Convenient installation for any application as stand alone data concentrator or for any divice with Modbus-RTU RS485 net-work application:

TMEX Module TMEX Module TMEX Module

TEM

015

TEM

015

TEM

015


Model TMEX-16DI-C306

Power Supply 85 ~ 265 Vac / 50 Hz

Pulse Digital Input Central Module

• Input Points 14 (Expandable up to 78) • Input Voltage Range 15~30 Vdc

• Input Current per Input 4.1mA at 24 Vdc Counters register Internal Memory

• Inputs max 78 points Maximum

• Resolution 32 Bits

• frequency 1 KHz (max)

• Pulse Width 5 ms (min)

Temperature

• Operating Temperature 0oC ~ 55oC

• Storage Temperature -20oC ~ 85oC

Terminal Connectors type Snap on Cable

• Logic Power and Com. 2+ 1(gnd) AC, 2 - RS485

• Inputs terminal & Comm. 14 + 2 point Common.

Communication Port Slave address 0 ~ 31 device

• Data Communication P:None, Data:8, Stop-bit:1

• Baud Rate (bps) 2400,4800,9600,19200 & 38400 Default : 9600 bps

Status Indicator Green LED

Dimensions (W x H x D) mm 125 x 114 x 70 mm

• Protocol Network (port-1) Modbus RTU - RS485/2w

TMEX-16DI-E321

Via internal bus

Expand Module

8 15~30 Vdc

4.1 mA at 24 Vdc Internal Memory

8

32 Bits

1 KHz (max)

5 ms (min)

0oC ~ 55oC

-20oC ~ 85oC

Snap on Cable

-

8 + 2 point Common

-

-

-

-

Green LED

50 x 114 x 70 mm

TMEX-16DI-M321

Via internal bus

Expand Module

16 15~30 Vdc

4.1 mA at 24 Vdc Internal Memory

16

32 Bits

1 KHz (max)

5 ms (min)

0oC ~ 55oC

-20oC ~ 85oC

Snap on Cable

-

16 + 2 common

-

-

-

-

Green LED

75 x 114 x 70 mm

thera ®



* You can select to configure the concentrator point from 14 point up to 78 point per slave as per your required

Ordering code


Installation Overall Dimension &

Type / Order No. Voltage (V) Pulse Input (point) Module Description

TMEX-16DI-C306 230 VDC 14 x DI 12~24Vdc Central Module TMEX-16DI-E321 24 VDC 8 x DI 12~24Vdc Expand Module TMEX-16DI-M321 24VDC 16 x DI 12~24Vdc Expand Module

RS485-2Wire Modbus

Pulse(+)

Pulse(-)

TEMO15

+15~30Vdc PS

To Input Module kWh

TPM230-D

LCD-Multifunction Network Power Monitor Build-in MODBUS RTU Communication Protocol

TPM230-D is a multifunctional network electrical instrument, is specifically designed and made for thee electrical monitoring requirement of power distribution system. It is with high-precision measurement all of the common electrical parameters including of three-phase voltage, three-phase current, active power, reactive power, frequency, power factor and four-quadrant energy etc; Long-life LCD display the instrument measuring parameters and operation information of network system; Rs485 communication interface, applying MODBUS RTU communication protocol; with four program-mable keys on the instrument panel, convenient switch, programmable setting of instrument parameter switch great flexibility. Many kinds of extended function modules for choosing: four-channel and a log quantity(0-20mA/4-20mA(optional) output can realize the transmitting output function of electrical quan-tity; four-channel switching value input and four-channel switching value output to realize the local or long-range switch signal monitoring and control output function (function of remote signaling ”and“ remote control”). The instrument can directly replace conventional power transmitter, meas-uring indicating instrument, electric energy measuring instru-ment and the related auxiliary unit. With modular structural design, user scan choose the most economical functional configuration according to the actual requirement, which is highly cost-effective. It is widely used in occasions of energy management systems, supply and distribution network automation, district power control and complete sets of switchgear. It has the advantages of convenient installment and maintenance, sample wiring, small quantity, programmable input parameters and capable of the network with different PLC, industry control computer communications software.

TPM230-D Series

Four-Channel Digital Input


Two-Channel Energy Pulse Out



Easy installation

Compact module 96x96 Square

2-Wire RS485 Net


PC (Modbus Master)

other Modbus device

TPM230 TPM230 TPM230


Page


Build-in MODBUS RTU Protocol RS485 Port.

®



Convenient installation for any application as stand alone meter or for any meters with MODBUS RTU RS485 network application:

Power Distribution & transmission Factory & Industrial Plant

New

12 pages Parameters Display of 3I, 3V, 3U, PF, F, P, S, ±∑kWh and ±∑kQh, I/O Status, Total : kW, Kvar, KVA.

Page

44 Catalog thera, 01/2009


Type / Order No.

Rate Voltage (V)

Rate Current (A)

4DI

TPM230-DT 3P/4W,230 V CT/1 A or CT/5A Yes TPM230-DS 3P/4W,230 V CT/1A or CT/5A Yes TPM230-DD 3P/4W,230 V CT/1A or CT/5A Yes

4AI

- -

Yes

4DO

- Yes

-

RS485

Yes Yes Yes

2Imp

Yes Yes Yes

Ordering code


thera Power & Electricity Meters

MODEL TPM230-D Network Three-phase three-wire, three-phase four- wire

Rated value AC 57.7V, 100V, 220V, 380V

Voltage Over load Consistent: 1.2 times instanaous: 2 times/30s

Input Consumption < 0.5VA{each phase}

Impedance > 500kW

Rated value AC 1A, 5A

Current Over load Consistent: 1.2 times instanaous: 2 times/1s

Impedance < 20mW{each phase}

Frequency 45 ~ 65Hz

Output mode Two-channel open-collector optical coupling pulse output

Pulse constant

Active 10000imp/kwh

Reactive 10000imp/kvarh

On the condition of rated voltage,

reference frequency and COSj=1.0,

Electric Start when load operational current is

energy 0.001 In, it can start and measure

the electric energy continuously.

When exerting 115% rated voltage and

Creep no current in the current circuitry, the

instrument is with no electric energy

Output accumulation and pulse output

Output mode RS485

Communication Protocol MODBUS RTU

Baud rate 1200, 2400, 4800, 9600

Channel quantity 4 channels

Analog Output mode 0 ~ 20mA, 4 ~ 20mA programmable

quantity Load ability <400W

Channel quantity 4 channels

Switching Output mode Normally open relay contact output

value Contact capability AC 240V/1A

Switching value input Four channel dry contact input modes

Display mode LCD { Blue or yellow green back lighting

Voltage, current + ( 0.5%FS+one digit )

Measuring Active power, reactive power, apparent power + ( 0.5%FS+one digit )

accuracy Frequency + 0.1 Hz

Power factor + 0.01 PF

Active energy + 0.5% {only for reference, not for meter age}

Reactive energy + 2.0% {only for reference, not for meter age}

Source Scope AC/DC 85 ~ 264V

Consumption <5VA

Input and source > 2kV50Hz/1min

Safety Withstand Input and output > 1kV50Hz/1min

voltage Output and source > 2kV50Hz/1min

Insulating resistance Any two of input, output, source, casing >20M

Temperature

Operation: - 10 ~ 50oC

Storage: - 25 ~ 70oC

Environment Humidity <85%RH, free of wet and gas corruption

Elevation <3000m


Dimensions (mm)

Shape Case Cutout hole

Square W H D W H

96x96 91 91 100 92 92

Documents

Catalog Thera