HIGH PRESSURE CLEANER

PRESSURE: 290 BAR (4200 PSI)

FLOW RATE: 27 LPM (7.1 GPM)

CATALOGUE CUM QUOTATION PJS 27300 (50 Hz)

Discount Available

OPEN CHALLENGENot ONE Indian manufacturer can match the following BASIC USPs of PressureJet!!!

1. We test each model for 500 hours of rigorous, continuousduty performance before it is introduced in the market. Allour pumps undergo rigorous, continuous test at full testparameters for 500 hours, to ensure trouble free and along life of our pumps in the field. PressureJet can produceproof of such tests, no other manufacturer can! More than90% manufacturers do not have a test bench where theycan take such test!!

2. Thoroughly check each component of DIFFERENT pumpsand accessories, using over 257 quality checkinginstruments including CMM. No other manufacturer canclaim to have such variety of Quality checking instruments,which are essential to ensure technically correct products.

3. PressureJet implemented Oracle EBS 12.1.3. There areinnumerable features which many other software do nothave. One of the features is: 80% Purchase Orders for itemsthat go in your pump are sent automatically. Less humanintervention means faster processes, correct and timelypurchases, and reduced employee cost. This is the reasonwhy PressureJet is very competitive in spite of being No. 1 inQuality.

4. Incorporate “BLIND QUALITY CONTROL” feature that prohibits inspection team access to data onquality checks. Ensures 100% quality deliverance for client, reduces overall costs.

5. Use Work Stations with licensed 3-D Solid Work Software.Increases accuracy through better designs, reduces coststhrough increased productivity and guaranteed lab testdesign parameters, which saves unbelievable resource coston the account of Trial and Error.

2

9. Provide online access to view the pump performanceduring Inspection. Enables you to view the actualperformance of your pump through IP cameras in real-time.

8. Use state-of-the-art Atlas Copco make electric torquewrench to tighten all bolts in your pump. Ensures perfectfitting of all parts of your pump. This ensures long life ofparts. This is one of the reasons, PressureJet is the onlysupplier which insists customer to opt for 24 hourscontinues duty test, before finalizing the order andcommitting your major investment. No other HighPressureJet Pump manufacturer in the world uses thishighly sophisticated, latest tool.

10. Lowest Price Guarantee: To a Genuine buyer, PressureJet guarantees that in case you find our priceshigher than any other manufacturer, we shall offer you 1.25 times more discount than the pricedifference. For example, in case our price is Rs. 40,000/- and another manufacturer’s price is Rs.38,000/-, then we shall offer you a discount @ 1.25 times of the difference in value i.e. Rs. 2,500/. Thisguarantee is valid for 3 months even after the date of dispatch. Should you need, PressureJet shall behappy to submit this guarantee on a Judicial Stamp paper.

7. PressureJet is probably the only Indian High PressureJet Pump manufacturer that carries a million-dollar inventory. For this reason, you don’t need to worry about in-time delivery of spares when youexhaust your inventory!!!

6. Assemble your pump in a totally dust-free environment towhich ensures a long life of your pump. In case theassembled pump has tiny dust particles, you can’t evenimagine that how much it will cost you in the long run

3

About

✓ Established in 1996 in Ahmedabad, India.

✓ An ISO 9001:2015 certified company

✓ Manufacturer of high pressure, positive displacement, reciprocating triplex plunger pumps and relevant accessories.

✓ More than 85 dedicated people.

✓ 11000 Sq.ft. area in Asia’s premier industrial estate in Ahmedabad.

MORE THAN 5000 CUSTOMERS WORLD WIDE

4

Base Frame

Mounted System

Frame Mounted System

with Control Panel

Trolley Mounted System

Close CoverTrolley With MS Tank

TYPES OF SYSTEMS

A system means integration of bare pump, and other accessories like base frame or trolley, hoses, different

valves, pressure gauge and almost all essential accessories to be fitted, to make a complete module as

system, to perform particular task / application with optimum performance and safety.

Base Frame

Mounted System with Diesel Engine

5

PJS 27300

(E)

(B)

(C)

(A)

(F)

(G)(H)

(I)

(J)

(K)

Model A B C D E F G H I J K

PJS 54150 341 263 168.2 145 105 82 - 217.5 28 35 87

Note : All Dimensions are in mm.

Max. Rated Pressure 290 Bar(4200 psi)

Max. Rated Flow Rate 27 LPM (7.1 gpm)

RPM @ 50 Hz 1450 RPM

Inlet Connection 3/4” BSPF

Inlet Pressure 1 to 2 Bar

Outlet Connection 1/2” BSPF

Working Fluid temp. 60 oC

Oil Grade 20W 40

Oil Capacity 1.2 Litre

Bare Pump Weight 17.2 Kg.

Bare Pump Dimension(mm) 341 (L) X 263 (W) X 168.2 (H)

6

190 Bar20 H.P.

S.N. Item DescriptionQty

(Nos)Bronze Silver Gold

1 XLT2730IR Bare Pump 1

2Electric Motor 20 Hp-1500 Rpm-3 Ph-415v-50Hz-IE2 (Make:Pressurejet)

1

3.1Base Frame-180-160 with Pin Bush Coupling and Guard

1

3.2 Trolley with Pin Bush Coupling and Guard 1

3.3Trolley and 270 ltr Tank(Plastic) with Pin Bush Coupling and Guard

1

4 28.0320.65 F5 L Plastic Suction Strainer 1

5Pressure Gauge Glycerin Filled 2.1/2"(63mm) SS Dial Bottom Connection-3/8" BSP-700 BAR

1

6High Pressure Needle Valve-3/8" BSP-500 Bar (SS 304)

1

7 S-10 Safety Valve 1

860.1700.00 VB350 Unloader Valve with knob-40 l/min.350 bar

1

930.2511.00 RL30 Spray Trigger Gun+sw6-40 l/min.310 Bar

1

10High Pressure Cleaning Nozzle Degree - 0 ,Size-07-1/4" NPT (1/4MEG0007)

1

11High Pressure Cleaning Nozzle Degree - 5 ,Size-07-1/4" NPT (1/4MEG0507)

1

12 Rigid Lance 1/4" Sch-80 X 1000mm (SS 304) 1

13High Pressure Hyd. Rubber Hose R2-3/8"X 10 Meter (Both Side MS Swivel Female Connection 3/8" BSPF)

1

14Low Pressure Suction Hose 1" X 3 Meter (Single Side MS Swivel Female Connection 1 BSPF)

1

15Low Pressure Suction Hose 3/4" X 3 Meter (One Side MS Swivel Female Connection 3/4" BSPF))

1

16Electric Control Panel Star Delta-3 Ph-20Hp-415v-50Hz

1

176 Sq.Mm - 4 Core Pvc Insulated Copper Flexible Cable

10 m

18 Lance Adapter 1/4 BSPF X 1/4 NPTF 1

TOTAL SYSTEM PRICE (INCL. OF ABOVE ITEMS) Rs.

3,18,543Rs.

3,27,800Rs.

3,30,000

MODEL SELECTION CHART

7

8

S.N. Nozzle Options Qty.Unit Price

(Rs.)Total Price

(Rs.)

1High Pressure Cleaning Nozzle Degree - 0 ,Size-07-1/4" NPT (1/4MEG0007)

1 600 600

2High Pressure Cleaning Nozzle Degree - 5 ,Size-07-1/4" NPT (1/4MEG0507)

1 600 600

Complete System as above with Diesel Engine-25 Hp/1500 Rpm,Self Start (Make-Field Marshal Model-GD 25) Instead of Electric Motor

1Rs.

3,70,100Rs.

3,87,000Rs.

3,89,000

Complete System as above with Electric Motor 20 Hp-1500 Rpm-3 Ph-415v-50Hz-Flame Proof-(Make:Crompton)

1Rs.

3,68,500Rs.

3,77,800Rs.

3,79,750

S.N. Spares Parts ListQty./Pump

Unit Price (Rs.)

Total Price(Rs.)

Spare Parts for Pump PJS 27300

1 260126 Plunger Seals 20 mm Kit (NLT,XLT27) 1 2,948 2,9482 260131 Complete Valve kit (XLT27) 3 567 3,4003 260003 Plunger Oil Seal kit (NLT,XLT,XXT,PX) 1 350 350

Spare Parts for Unloader Valve4 60.1615.24 Spares Kit-VB280-350/4 (VB350) Unloader valve 1 2,410 2,410

Spare Parts for Gun5 30.2519.24 Spares Kit -Rl30, Gun 1 1,140 1,140

S.N. Optional Items for Different Application QTYUnit Price

(Rs.)Total Price

(Rs.)

1 Chemical Injector with strainer and Tank 1 4,500 4,500

2 090501 Telescoping Wands Lance 730-24 feet 1 35,000 35,000

3 Floor Cleaner FL-AER-200 1 29,000 29,000

Note: 1. We also offer custom design pumps and systems, However price of custom design products are not comparable with standard models.

2. Above mentioned spares prices are applicable only when you place an order along with system.

SPRAY TRIGGER GUN

A high-pressure gun controls the flow of water from pump to

nozzle. Squeezing the trigger permits water to flow through the

gun, and releasing trigger shuts off the flow.

UNLOADER VALVE

This is the main ‘safety’ in your high pressure cleaner system. The mostcommonly used is the "pressure actuated" type valve. When the pressure guntrigger is released the valve senses the pressure build up, it diverts the waterflow from the pump outlet back into the inlet side of the pump this is called‘bypass mode.’ Without this critical component this closed-gun situationwould build pressure to the point where it would stall the power source,rupture the gun, hose or even the pump itself.

SAFETY VALVE

Safety valve is very important accessory and it prevents major accident, in

case of event of any problem because of high pressure built up in line. It is

standard on all PressureJet Pumps for the temporary relief of excess system

pressure.

PRESSURE GAUGE

Glycerin Filled Pressure Gauge, ideal for dampening the effect of

pulsation and vibration. Widely demanded, it has a stainless steel case

filled with glycerin to offer protection against harsh environments. It

enhances the integrity and reliability of measuring system for long periods

under extreme operating condition.

ACCESSORIES LIST

9

NOZZLES

In High Pressure Cleaner System, role of different nozzles is very crucial. The goal is to increase the kinetic

energy of the water at the expense of its pressure and internal energy. The nozzle is the restriction at the

end of Gun that creates the pressure.

The turbo nozzle is a most unique solution to limitations of the 0o tip conventional nozzle. 0o tip createsthe most impact pressure but that is so concentrated. Advantage of turbo nozzle is it spins 0o jet in a circleof 5o or 15o . It is commonly stated that turbo nozzle has double cleaning efficiency.

Straight Jet Nozzle

✓ A straight jet nozzle has a orifice whichcreates a solid jet with 00 spray angle.

✓ Creates a jet possessing very high impactstrength.

✓ Normally use wherein very hard and thickscales are to be removed.

✓ Should be use where the parent material isable to sustain high impact energy. Cannotbe used for cleaning delicate items likeglass, tiles, etc.

Angular Jet Nozzle

✓ An angular jet nozzle has an orifice whichdevelops jet spray at certain angle e.g. 50

or 150, etc.✓ Creates a jet having somewhat impact

strength.✓ Normally use to clean loose scales or for

general washing only.✓ Use while cleaning loose scales and normal

dirt from delicate parts like welded joints,glass lining, etc.

GENERAL INFORMATION

Various Applications of Nozzles Video

10

https://www.youtube.com/watch?v=j2Ze0dLDWeohttps://www.youtube.com/watch?v=j2Ze0dLDWeo

0o Nozzle(Straight Jet)

These pressure washer nozzles produce a pencil point pattern. There is no fan created so this is not the tip to use when cleaning coverage is desired. The red tip does deliver the highest impact as it concentrates the pressure into the smallest area. Avoid damaging wood or other fragile surfaces.

This is an ideal tool for cleaning under the deck of a lawnmower, removing caked on mud from equipment, cleaning stains from concrete, masonry, steel and aluminum even removing the grass from cracks in the sidewalk.

5o V-Jet Nozzle

These pressure washer nozzles are referred to as chiseling tips. Held at a 45 degree angle you can use itlike a scraper to remove peeling paint or any scale. It is also used for other tasks where breaking thebond is harder than average. Of your different pressure washer nozzles you will find yourself using thisone the most often when the task is tough.

CONVENTIONAL NOZZLES

11

Electric Control Panel

CONTROL PANEL

A control panel is a flat, often vertical, area wherecontrol or monitoring instruments are displayed. Incontrol panel there are many controls like on/offbutton, Safety Shut down switch, Voltage and Amperereadings.

HIGH PRESSURE RIGID LANCES

For Cleaning applications, a high pressure rigid lance provides easy and firmgrip for the Operation. A nozzle is attached to the end of the lance.

Note: We also offer up to 1 ,1.5,2 meter long lances.

FLOOR CLEANER

Floor Cleaners is ideal for smaller and hard to reach areas both indoors and

outdoor. Small, compact and light weight design is ideal for large and small

jobs.

Possible applications: - Cleaning industrial floors, Cleaning car parking places,

Cleaning terraces, Cleaning entrances etc.

Compared with cleaning by hand operated lances, floor cleaner having big

advantage regarding the quantity and quality.

CHEMICAL INJECTOR

It is designed specifically for injecting chemicals, soaps intothe water of your high pressure cleaning system, this injectorsimply threads on to the high pressure or output side of yourpump. Injecting the chemicals on the output side of thepump allows you to easily clean your equipment or chemicalsthat normally cannot pass through the high pressure pump.

TELESCOPIC WANDTelescopic wand is useful for cleaning at the height from the ground.It has long hollow rod. By the high pressure cleaner you can cleansurfaces which are on the height. This telescopic wand is usedprimarily in the garage, workshop or simply for quick pick-upsaround the house.

OPTIONAL ACESSORIES

12

TERMS & CONDITIONS FOR PUMP

Packing &

Forwarding

Packing & Forwarding charge is the costing of Packing Material, Local Transportation from our Factory

to Transporter local Godown, Hamali, Loading-Unloading etc. This is considerable cost to us therefore it

will always be charged extra, whenever material is to be dispatched in safely Packing. It will not be

applicable when material is to be dispatched in unpacked condition.

For domestic packing, P & F @ 3% will be charged extra & For export packing, it will be extra @ 5%.

Freight &

Transportation

Unless and otherwise specified, freight charges should be paid by the client only.

All Materials will be dispatched from out factory at Vatva, Ahmedabad only.

Due to some unavoidable circumstances, neither we pay the freight charges nor we negotiate / decide

the suitable transporter/courier, on behalf of any client.

In case of full/part payment against dispatch documents/COD, then client has to select

transporter/courier from the list of our approved transporter/courier only. In any circumstances or

emergency, If client insist to dispatch thru his private vehicle or any local transporter, then terms of

payment against dispatch documents/COD will be null & void and client has to pay decided payment

before loading of material in vehicle.

In case of freight charges in our scope, our decision for the selection of transporter/courier will be final.

Transit Insurance

Transit Insurance will be arranged and borne by customer.

If we have to mail dispatch instruction to your insurance company at the time of dispatch, then it will

be your responsibility to mail us about their required list of documents and mail id, on which soft copy

of documents are to be mailed. Please take confirmation from us in writing about receipt of such

important mail to ensure it is received to us.

We always pack our material by following best industrial packing. Client has all the right to check the

packing at the time of dispatch, if required.

We always take photographs of all the material before finally closing the box to ensure that all the

material as per packing list is kept inside the box to avoid any possibility of short supply.

For any damage/ misplacement / lost / theft of material during transit, client has to claim the loss from

their insurance company. PressureJet is not liable to take any responsibility to supply/replace any such

item on free of cost basis. In such case, our liability will be limited up to supplying material with special

one-time discount.

Inspection

Pre-dispatch inspection at our factory will be provided Free of cost within 4 days of readiness of

material.

In case of inspection, your confirmation for acceptance of our “Inspection procedure” is required along

with Purchase order.

13

Guarantee

The pump is guaranteed against any manufacturing defect for a period of 12 months from the date of

installation or 18 months from the date of invoice, whichever is earlier. Accessories, parts subjected

to wear and tear, rubber parts (especially rubber hose and Pressure Gauge) are not cover under any

guarantee. For bought out items. i.e. Electric Motor, Starter, Pressure Gauge, Hoses etc. warranty will

be transferred as we get from its suppliers.

Please note that in case of bare pumps (PressureJet or Hawk Series), it is mandatory for the customer

get the bare pump fitted by a well trained and experienced technician. Improper fitment can result in

mis-alignment between the shaft of the pump and the motor and may damage the bearings and

other moving parts. Any damage caused as a result of such misalignment and/or improper fitting shall

not be covered under warranty.

For bare pumps of Hawk Series, PressureJet Systems passes on back-to-back warranty offered by the

Original Equipment Manufacturer of Hawk Products, LEUCO S.p.A. to its customers. To know more

about the warranty terms of Hawk Series of Pumps, please click http://www.manufacturing-high-

pressure-pumps.com/warranty.php

Warranty For detailed “Warranty” , please click http://www.pressurejet.com/pages/51/warranty.aspx

Procurement of

Accessories

As you have referred, we have listed and furnished the price of each accessory separately. If you wish,

you can buy accessories at your own and we shall provide you necessary information to procure those

items. Proper assembly of all such items, which are procured by client, will be in client scope only.

Assembly charges will be extra for the assembly of any such item by PressureJet.

Any item, not confirmed by us in writing as a part of our scope, will always be charged extra.

PressureJet is not responsible to supply any such extra item/s on free of cost basis, irrespective of its

importance for proper working / safety of pump system or we forgotten to consider the same in our

offer by mistake.

Commissioning

About commissioning, we are asked by many customers, who really do not come across this product.

In fact, this is a very simple product and after a long experience, we have designed such a quality

presentation, which is not only effective but also very easy to understand. 99% of our customers

including importers, who buy high pressure triplex plunger pump up to 200 hp, do the commissioning

with the help of all these tools.

On Site commissioning can be offered on chargeable basis.

Changes In Purchase

Order

Orders accepted by PressureJet are not subject to changes or cancellation by Customer, except with

PressureJet’s written consent. In such cases where PressureJet authorizes changes or cancellation,

PressureJet reserves the right to charge Customer with reasonable costs based upon expenses

already incurred and commitments made by PressureJet, including, without limitation, any labour

done, material purchased and also including our usual overhead and reasonable profit and

cancellation charges from PressureJet’s suppliers.

14

http://www.manufacturing-high-pressure-pumps.com/warranty.phphttp://www.pressurejet.com/pages/51/warranty.aspx

Scope of Supply

In case of event of order, we assume that your Purchase Order is strictly in line with our Technical &

Commercial submission(s) / quotation. In case of any deviation, please attach an annexure - “DEVIATION

SHEET”, otherwise deviation will not be considered as a part of scope. Deviation, not mentioned

separately and requirement / instruction/ request conveyed verbally is not being part of our scope of

supply.

We shall supply only & only these items and their specifications, which we are mutually agreed upon and

mentioned in our quotation.

It is obvious that one may have his/her own perception of the quality, aesthetic, technical or any other

subject, which is very difficult to accommodate after manufacturing.

Any other request to accommodate any extra item in our scope may not be entertained or it will be

charged extra considering its possibility and viability for us.

Force Majeure

Clause

PressureJet shall not be responsible or liable for any delay or failure to perform any of its obligations if

such failure is as a result of circumstances outside its reasonable control, including but not limited to acts

of God (including fire, flood, earthquake, storm, weather, hurricane or other natural disaster), war,

invasion, act of foreign enemies, hostilities (regardless of whether war is declared), civil war, rebellion,

revolution, insurrection, military or usurped power or confiscation, terrorist activities, nationalization,

government sanction, blockage, Faulty castings or forgings breakdown, sabotage, embargo, labor dispute,

any type of strike, lockout or interruption or failure of electricity or telephone service and PressureJet

shall be entitled to a reasonable extensions of its obligations.

Order

Cancellation

Policy

If the Buyer cancels an Order or refuses to accept delivery of the Goods, then the Buyer will be liable to

pay to PressureJet a non-refundable cancellation fee of 30% of the Purchase Price (as per PO). If the Buyer

has paid for the Goods, then such cancellation fee will be deducted by PressureJet from any refund.

In the event that a Buyer postpones delivery of the Goods for more than 3 days from the date of written

intimation by the PressureJet for readiness of material, then the Buyer will be liable to pay to PressureJet

a non-refundable holding fee of 2% of the Purchase Price (as per PO) per week on pro- rata basis until the

Date of Delivery of the Goods. If the Buyer refuses to accept delivery within 10 days of the Material

Readiness Confirmation, then the Purchase Order shall be deemed to be cancelled and the Buyer will be

liable pay the cancellation fee @ 30% of PO Value.

Above mentioned cancellation charge and holding charge represent a genuine and realistic pre-estimate

of PressureJet’s losses arising from the cancellation or delay of the delivery of the Goods in those

circumstances.

Limitation of

Liability

PressureJet will not be liable to the Customer whether in contract, tort (including for negligence and

breach of statutory duty), misrepresentation (whether innocent or negligent), restitution or otherwise, for

any loss (whether direct or indirect) of profits, claims of whatever kind, business, revenue, or goodwill;

any special, indirect or consequential or incidental loss, costs, damages, charges or expenses however

arising under these Terms.

15

In any case, PressureJet’s liability contract, tort (including for negligence and breach of statutory duty),

misrepresentation (whether innocent or negligent), restitution or otherwise arising out of the subject

matter of the Contract shall not exceed 5% of the Purchase Price of the Goods.

Changes In Purchase

Order

Orders accepted by PressureJet are not subject to changes or cancellation by Customer, except with

PressureJet’s written consent. In such cases where PressureJet authorizes changes or cancellation,

PressureJet reserves the right to charge Customer with reasonable costs based upon expenses already

incurred and commitments made by PressureJet, including, without limitation, any labour done,

material purchased and also including our usual overhead and reasonable profit and cancellation

charges from PressureJet’s suppliers.

Shipment/ Damages

or Shortages in

Transport/ Risk

Except for obligations stated under our “Warranty terms”, PressureJet’s responsibility for goods ceases

upon delivery to the carrier (Transporter/ Courier) etc. In the event of loss or damage during shipment,

Purchaser’s claim shall be against the carrier or insurance company only. PressureJet will, however, give

Purchaser reasonable assistance to secure adjustment of Purchaser’s claim against the carrier or

insurance company. Claims for shortages must be made in writing within Seven (7) days after receipt of

goods by Purchaser. If PressureJet does not receive written notification of such shortages within Seven

(7) days, it shall be conclusively presumed that the goods were delivered in their entirety.

Jurisdiction Any dispute shall be subject to Ahmedabad Jurisdiction only.

16

OUR REGISTRATION DETAILS Company Identification No. U29120GJ2006PTC049331Date of Incorporation of

Company09.11.2006

PAN No. AAECP0774HGST No. 24AAECP0774H1ZI

MSME Status & Registration

Details

Small Scale Company

SSI Registration No. 24-00-12-29234 Date. 03.06.2011

BANK DETAILS

Beneficiary Name & AddressPressureJet Systems Pvt. Ltd.

62/13, Phase- 1, GIDC, Vatva, Ahmedabad - 382445. Gujarat, India. Name of Bank KOTAK MAHINDRA BANK

Bank Address 83/9, GIDC, Phase-1, F road, Vatva, Ahmedabad – 382445 Gujarat,

India.Account Type OD/Current AccountAccount No. 0012539475Branch Code 2568IFSC / RTGS Code KKBK0002568Swift Code KKBKINBBXXImport - Export Code 0802002226

IMPORTANT INSTRUCTIONS FOR PAYMENT

In case of payment direct deposit

RTGS/ NEFT/TT/ Cheque/ IMPS etc.

Whenever you deposit payment directly in our account either by

RTGS/NEFT/TT/Cheque or by any other way, then you are

requested not to follow any other instruction from unreliable

sources (commonly referred to as “hackers”), who may send an

fraud E-mail of Bank details from very similar (Probably Not Exact)

mail ID & may instruct you to deposit the payment in other bank

&/or account name, branch location etc.

Do verify our bank details with us before depositing payment.

Please note that if you do not follow these instructions and make

the payment in any fraud account, then PressureJet will not, in any

way, be responsible for any inconveniency that may arise in future.

Whenever you deposit payment directly in our account, please

intimate us on our mail ID i.e. sales@pressurejet.com &

dispatch@pressurejet.com for convenience on both sides. If no

intimation will be received, then your payment will be accounted

as “Unidentified” and necessary further action and/or transaction

may not be processed.

ACCOUNT DETAILS

17

mailto:sales@pressurejet.commailto:dispatch@pressurejet.com

ALSO OFFERS…18

PressureJet also offers wide range of pumps/systems for different Applications.

Applications

Hydro Jetting Sewer Jetting

Hydro Blasting Fire Fighting

Hydro Test (With Automation) High Pressure Cleaner

Wet Sand Blasting Fogging and Misting

Pump model Flow Rate (LPM) Pressure (Bar) Motor H.P. RPM (50 Hz)Inlet

Connection (BSP)

Outlet Connection

(BSP)

Working Fluid Temp. (°C)

Oil Capacity (Ltr)

NHD 1212 R 12

90 3

1450 1/2” 3/8” 60 0.460 2

30 1

NHD 1415 R 14 140 5 1450 1/2” 3/8” 60 0.4

NPM 1525 R 15250 10

1450 1/2” 3/8” 60 0.7180 7.5

NMT 2120 R 21

180 10

1450 1/2” 3/8” 60 0.7130 7.5

90 5

NLT 3020 IR 30

190 15

1450 1/2” 3/8” 60 1.2125 10

90 7.5

XLT 4017 IR 40

170 20

1450 3/4” 1/2” 60 1.2140 15

95 10

65 7.5

XLT 5415 IR 54

150 25

1450 3/4” 1/2” 60 1.2130 20

100 15

70 10

XXT 7015 IR 70

150 30

1450 1” 3/4” 60 1.2

130 25

100 20

80 15

50 10

PX 1550 IR 15 500 20 1450 1/2” 3/8” 60 1.2

PX 1735 IR 17 350 15 1450 1/2” 3/8” 60 1.2

PX 2150 IR 21 500 30 1450 1/2” 3/8” 60 1.2

XLT 2730 IR 27 290 20 1450 3/4” 1/2” 60 1.2

✓ The high-pressure suction line must be at least one size higher than the pump connection and itmust be flexible.

✓ Booster pump is necessary for operating the pump, then 1. suction line supply must be flooded and2. suction line connection must be from the bottom of water tank.

✓ In case booster pump is not a part of the assembled system, then suction pressure must bebetween 1 bar to 2 bar.

✓ Maximum hardness of water should not be more than 100 PPM✓ pH value of water must be between 6.5 and 8.5✓ Water temperature range: 5 °C to 60 °C✓ Ambient water temp. range: 2˚C to 43˚C✓ The water should not be mixed with any type of liquid or chemical (chlorine, soap, etc.…)✓ Only clean, fresh water can be used in the pump. Recirculated water not to be used.✓ The filter must be cleaned at regular intervals. The frequency of cleaning will be depend on water

quality. In case the filter is not cleaned regularly, the pump will trip.✓ Iron content in the water should be less than 0.1 ppm✓ Silica level in water should be less than 15 ppm✓ Water turbidity: Maximum 5 NTU (Nephelometric Turbidity Unit)

TIPS TO ACHIEVE A LONG LIFE OF PUMPS

19

PARTIAL LIST OF CLIENTS

Important Note: Owing to continuous R & D, technical details and specifications mentioned in thiscatalogue are liable to change anytime. All rights reserved with PressureJet. For latest Information & more

details, please visit our website.

Our Website is fully informative, exhaustive and communicative. It is designed to provide maximum

information in most precise form to help our valued customers to take a quick and right decision.

Call Us+91 9375022359+91-79-25830762

Write to us atsales@pressurejet.com

VisitYouTubewww.pressurejet.com

Address

PRESSUREJET SYSTEMS PVT. LTD.62/13, Phase-1, Vatva GIDCAhmedabad – 382 445, Gujarat, India

20

http://www.pressurejet.com/https://www.youtube.com/user/pressurejet1https://www.youtube.com/user/pressurejet1http://www.pressurejet.com/