50
CATALOGUE OF DRILLING TOOLS AND EQUIPMENT www.erde-tools.com

CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

  • Upload
    others

  • View
    19

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

CATALOGUE OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 2: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

2

1.

2.

4.

5.

6.

3.

9.

7.

8.

10.

11.

About

Casing oscillators and accessories

Augers

Drilling buckets

Core barrels and cutters

Casings and accessories

Tremie equipment

Belling buckets

Chisels and hammer grabs

Wear and spare parts

Contacts

4

6

24

29

33

12

41

37

39

46

49

ContentCATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

con

ten

t

«Kazachya CS construction site (2013)«

Page 3: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

3

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 4: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

1. About

4

«Production & Trading Company «ERDE TOOLS» LLC is a russian designer and manufacturer of drilling tools and equipment for rotary, cable-tool, HDD and RCD rigs.

For more than 20 years we have been designing and manufacturing drilling tools for all common drilling methods taking into account the clients most stringent requirements to tools quality and delivery terms and nowadays we are the largest supplier of such equipment in Russia and CIS countries.

The production range covers all currently existing deep foundation technologies, such as: Kelly drilling(with or without casing oscillator), CFA, cased CFA, FDP(PDP), CSM(DSM) etc.

«PTC «ERDE TOOLS» has the capacity to manufacture cable-tool, rotary drilling tools, and casings to any connection standard, from 426 up to 2000 mm inclusively, wear and spare parts for the same, as well as casing oscillators, kelly bars and custom metal structures developed in house or by third parties.

Original technologies, experienced designers and engineers, manufacturing culture, constant feedback from Clients, and modern equipment are the foundations of the high quality of our products, making our company competitive on the global market.

«PTC «ERDE TOOLS» clients have got a wide range of services from tool selection advice to delivery of the ordered products to the construction site. The company aims at the highest product quality and customer service levels: drilling tools manufacturing is our profession.

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 5: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

5

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Reconstruction of the Pyatigorsk - Georgiyevsk highway City of Georgiyevsk, Stavropol region (2009)

Page 6: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

6

2. Casing oscillators and accessoriesIn 2007 our Company successfully started manufacturing a complex kind of equipment – casing oscillators.

The process of manufacturing casing oscillators is a closed loop starting with developing engineering documents and ending with acceptance testing at the Client’s construction site.

Our casing oscillators demonstrate great performance at construction sites in Central and North-Western Russia, Urals, and Western Siberia.

«PTC «ERDE TOOLS» specialists are highly experienced in overhauling, upgrading, adapting and designing casing oscillators with nominal diameter of 800 to 1500 mm for drilling rigs by European manufacturers like MAIT, Bauer, Leffer, and Chinese ones like Sany, Zoomlion, Sunward. Our casing oscillators are hooked up to the unit’s own hydraulic system or an autonomous hydraulic plant.

«PTC «ERDE TOOLS» manufactures all accessories for both its own and imported casing oscillators – such as reduction inserts, centering rings, junction blocks etc.

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

СO-1500-03 Casing Oscillator Construction site of the Novocherkasskaya GRES Power Station, city of Novocherkassk, (2012)

Page 7: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

Casing oscillators and accessories

7

Casing oscillator CO-1500-02 technical data

Nominal casing diameter, mm

Clamping force, kN

Lifting force, kN

Torque, kNm

Stroke, mm

Full clamp rotation angle, deg

Operating pressure, Mpa

Maximum pressure, Mpa

1500

900

1880

2060

540

25

30

32

Length, mm

Width, mm

Total height (min/max), mm

4115

2700

1540/2080

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

СO-1500-02 Casing Oscillator Continuous Steel Casting Facility of the Oxygen Steelmaking Department of the «ChMK Corporation, city of Chelyabinsk (2008)

«

Page 8: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

Casing oscillator CO-1500-03 technical data

8

Nominal casing diameter, mm

Clamping force, kN

Lifting force, kN

Torque, kNm

Stroke, mm

Full clamp rotation angle, deg

Operating pressure, Mpa

Maximum pressure, MPa 32

1500

900

1880

2060

540

25

30

32

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

СO-1500-03 Casing Oscillator Construction of a bridge across the Ufa River, city of Krasnoufimsk (2011)

СO-1500-03 Casing Oscillator Production facility of «PTC «ERDE TOOLS LLC, city of Nizhny Tagil (2014)

Casing oscillators and accessories

«

Page 9: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

Casing oscillator COU-1,5 technical data

Nominal casing diameter, mm

Clamping force, kN

Lifting force, kN

Torque, kNm

Stroke, mm

Full clamp rotation angle, deg

Operating pressure, Mpa

Length, mm

Total height (min/max), mm

Weight, kg

1500

707/754

2121/2828

2428

540

21

32

4060/4562

1575/2115

13 050

9

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

СOU-1,5 Casing Oscillator Innoprom 2011 ExhibitionYekaterinburg

COU-1,5 Casing Oscillator

Main features that make this casing oscillator stand out lie in the use of three

hydraulic cylinders instead of two for the insertion and extraction of casings, and in the

detachable design of the collar and support. Implementation of these changes allowed

to substantially increase the casing insertion and extraction force, and the updated

design of the support and collar enable moving away from the well without removing

the casing.

Factory acceptance and field tests of the COU-1,5 casing oscillator were successfully completed in 2011.

Casing oscillators and accessories

Page 10: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

10

Accessories«PTC «ERDE TOOLS» manufactures all accessories for both its own and imported casing oscillators – these are insertion pieces, centering rings, junction blocks etc.

Casing oscillators and accessories

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Reduction inserts

Reduction inserts are designed for transitioning from a casing oscillator’s rated diameter to a diameter of the casings being used.

A three-piece insert Ø1500/880 mm

Centering rings

Centering rings are meant for aligning the casings. Internal diameters of centering rings correspond to the casings’ diameters.

Centering ring with bushings Ø880 mm

Page 11: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

11Casing Ø800 mmon automatic flux core welder

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 12: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

12

L- 2m

CasingØ 880 mm,

3. Casings and accessoriesCasing is designed to guide the tool and stabilise borehole walls. Its indication depends on outer diameter and length.

«PTC «ERDE TOOLS» has the capacity for batch production of casings from 426 mm up to 2,000 mm with Bauer, Leffer, KATO, and Casagrande (GL) connection types.

High-quality welding is guaranteed by a unique automatic flux core welder.

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Piling works 620 mm. Construction site of «KUMZ (2014)«

Page 13: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

13

BAUER casings

Casings and accessories

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Coupling

Wrench

O-ring

Casing screw (type I or type II)

Nipple

Thread ring

Conical ring

Page 14: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

14

Bauer casings technical data

Outer diameter D1, mm

Inner diameter D2, mm

Total double wall thickness, mm

Drilling tool diameter, mm

Number of conical and thread rings, pcs.

Casing screw, type

Key width, mm

620

750

800

880

1 000

1 180

1 300

1 500

1 800

2 000

540

670

720

800

920

1 100

1 220

1 400

1 700

1 880

40

40

40

40

40

40

40

50

50

60

520

650

700

780

900

1 060

1 180

1 350

1 650

1 830

8

10

10

10

10

12

12

12

16

12

I

I

I

I

I

I

I

II

II

III

40

40

40

40

40

40

40

60

60

90

1 650 1 550 50 1 500 12 II 60

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Casings and accessories

Page 15: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

15

LEFFER casings

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Casings and accessories

Coupling Nipple

Wrench

O-ring

38S or 43S casing screw Thread ring

Conical ring

Page 16: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

16

600

620

640

700

720

750

800

880

900

1 000

1 080

1 180

1 200

1 300

1 500

1 800

2 000

520

540

560

620

640

670

720

800

820

920

1 000

1 100

1 120

1 220

1 420

1 720

1 910

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

45

500

520

540

600

620

650

700

780

800

900

980

1 060

1 080

1 180

1 380

1 650

1 850

8

8

8

8

8

10

10

10

10

10

10

12

12

12

18

20

20

38S

38S

38S

38S

38S

38S

38S

38S

38S

38S

38S

38S

38S

38S

38S

38S

43S

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

60

Leffer casings technical data

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Outer diameter D1, mm

Inner diameter D2, mm

Total double wall thickness, mm

Drilling tool diameter, mm

Number of conical and thread rings,

Casing screw, type

Key width, mm

Casings and accessories

Page 17: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

17

Japan casings

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Casings and accessories

Coupling Nipple

Wrench

Thread ring

Ñasing screw

Page 18: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

Key width, mm

800

1 000

1 200

1 500

1 700

780

980

1 180

1 480

1 680

690

890

1 090

1 390

1 590

45

45

45

45

45

660

860

1 060

1 350

1 550

714

714

714

714

714

40

40

40

40

40

18

Japan casings technical data

Nominal drilling diameter, mm

Outer diameter D1, mm

Inner diameter D2, mm

Total double wall thickness, mm

Drilling tool diameter, mm

Number of Casing screw,pcs.

Number of keys, pcs.

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Casings and accessories

Page 19: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

CASAGRANDE GL casings

19

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Casings and accessories

Coupling

Nipple

Screw

Cover plate

Key

Page 20: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

20

Casagrande GL casings technical data

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Outer diameter D1, mm

Inner diameter D2, mm

Total double wall thickness, mm

Drilling tool diameter, mm

Number of strips, pcs.

Number of matching keys

Number of keys, pcs.

500

600

700

800

900

1 000

1 200

1 300

1 800

2 500

2 000

420

520

620

700

800

900

1 100

1 200

1 700

2 350

1 880

40

40

40

50

50

50

50

50

50

75

60

400

500

600

680

780

880

1 060

1 160

1 650

2 300

1 830

2

2

2

3

3

3

3

3

4

5

5

4 4

4 4

4 4

6 6

6 6

6 6

6 6

6 6

8 8

10 12

10 12

1 500 1 400 50 1 350 3 6 6

(inserts), pcs.

Casings and accessories

Page 21: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

Outer diameter D1, mm

Inner diameter D2, mm

Flange thickness, mm

Drilling tool diameter, mm

Number of conical and thread rings, pcs.

Casing screw, type

Key width, mm

426

500

530

610

610

660

820

830

1 680

2 000

364

438

468

548

530

580

740

750

1 580

1 900

31

31

31

31

40

40

40

40

50

50

340

415

440

520

510 (500)

560 (550)

720

730

1 530

1 850

6

6

6

6

8

8

10

10

16

20

29S

29S

29S

29S

Type I

Type I

Type I

Type I

Type II

Type II

40

40

40

40

40

40

40

40

60

60

Custom casings technical data

21

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Casings and accessories

Page 22: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

Casing adapters

Ø1000 mm

Casing drive

Casing clamp

Ø880 mm

22

Casing shoes Ø880 mm with weld-on and replaceable teeth

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

adapter

Casings and accessories

Casing clamps

Casing shoes

Casing drive adapter transfers the torque from the rotary drive to the top of the casing column. The casing drive adapter’s design depends on the diameter, type of drive, and type of casing joint.

Our Company also produces cardan joints and drive’s flanges for drilling rigs made by any manufacturer.

Casing clamp is used for holding the inserted casing inside the well. Dimensions of clamps correspond to the outer diameter of casings. Moreover, the clamps could be produced for two sizes at once 800/880 mm, 1000/1180 mm etc.

Page 23: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

23Vertical turning lathe with CNC

Production facility of «PTC «ERDE TOOLS» LLC

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 24: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

24

4. Augers

PSF-2 auger at our Company exhibition booth. STT 2013

Auger is a tool for drilling in soils above ground water level and rocks. Can be used with or without casings.

Auger indications depend on drilling diameter, type of cutting part, number of starts and kelly box sizes.

Auger drilling diameters depend on inner casing diameter.

«PTC «ERDE TOOLS» has the capacity to manufacture augers with diameters of 300 mm up to 1,850 mm for any drilling rigs with Kelly-boxes of 100*100 mm to 200*200 mm.

«PTC «ERDE TOOLS» manufactures CFA augers with any connection system and the diameter of 350 mm up to 1,350 mm, mixing augers for DSM (CSM) technology, 360 mm to 600 mm displacement tool for DDS (PDP, FDP) drilling, as well as any custom augers based on Customer’s sketches.

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 25: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

Augers

25

Rock double-start auger

Rock progressivedouble-start auger

Ø780mm

Ø780mm

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 26: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

26

Designation Tooling Main application

SB

SB-2

SBF-K

SBF-2K

Augers

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Table of featured auger types

Type

of the cutting part

regular single-start auger

regular double-start auger

regular

regular

reinforced

reinforced

single

single

-

-

start

start

auger

auger

Flat tooth

Flat tooth

Standard flat pilot

Standard flat pilot

From soft to hard soils

From soft to hard soils

(groups 1

(groups 1

-

-

4 of soils and grounds)

4 of soils and grounds)

Reinforced flat tooth

and round shank chisel

Rock pilot

For drilling hard soils and average-

strength rock (groups 1-5 of soils

and grounds)

Reinforced flat tooth

and round shank chisel

Rock pilot

For drilling hard soils and average-

strength rock (groups 1-5 of soils

and grounds)

Page 27: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

27

SBF-KR

SBF-2KR

PSF-2

SBF-2KZ

Augers

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Designation ToolingType

of the cutting part

Table of featured auger types

single-start rock auger

double-start rock auger

double-start progressive rock auger (“predator”)

pilotless double-start rock auger

RSh 38/30-60L65/19

RSh 38/30-60L70/22

Rock pilot

From soft rock to regular

From soft rock to regular

rock (groups 4

rock (groups 4

-

-

7 of soils and

7 of soils and

grounds)

grounds)

RSh 38/30-60L65/19

RSh 38/30-60L70/22

Rock pilot

RSh 38/30-60L65/19

RSh 38/30-60L70/22

Rock pilot

From soft rock to regular

rock (groups 5-8 of soils and

grounds)

RSh 38/30-60L65/19

RSh 38/30-60L70/22

For drilling low to average hardness rock (category 6-8), especially suitable for fractured rocks

Main application

Page 28: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

28

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 29: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

29

5. Drilling buckets

Drilling bucket is a tool for drilling in all soil types below ground water level.

Bottom opening device is driven by either casing drive adapter or manual gripper assembly. Hinged structure of drilling bucket bottom makes unloading easy. Hollow-centered venting channel built into the drilling bucket ensures inflow of water or air below its bottom during extraction to prevent vacuum. Rotating bottom can be equipped with different types of chisels for drilling in different soils.

«PTC «ERDE TOOLS» has the capacity to manufacture drilling buckets with diameters from 300 mm up to 2,000 mm for any drilling rigs with kelly boxes of 100*100 mm to 200*200 mm.

KBF-KR Ø 780 mm

at our Company exhibition booth. STT 2013

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

(drill buckets)

Page 30: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

30

Drilling buckets

KB

KB-2

From soft to hard soils

(groups 1-4 of soils and

grounds)

Table of featured drilling bucket types

Designation Type of the cutting part Tooling Main application

KBF-K

KBF-2K

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

regular drilling bucket

regular double-start drilling bucket

Various types of flat teeth

Standard flat pilot

Various types of flat teeth

RSh 38/30-60L65/19

Rock pilot

For drilling hard soils and

average-strength rock

(groups 1-5 of soils and grounds)

regular reinforced drilling bucket

regular reinforced double-start drilling bucket

Page 31: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

31

KBF-KR

KBF-2KR

KB-L

Drilling buckets

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Table of featured drilling bucket types

Designation Type of the cutting part Main application

rock drilling bucket

doubledrilling bucket

drilling bucket with cleaning edge

RSh 38/30-60L65/19 From soft to regular rock

RSh 38/30-60L70/22

(groups 4-7 of soils

Rock pilot

and grounds)

Cleaning blade Used for downhole cleaning

Tooling

Page 32: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

32

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 33: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

33

Core barrel is a tool designed for drilling firm fractured rocks.

During operation the soil can accumulate in the core barrel body as a core; after barrel pulling out of the well the soil is tapped out through the windows in the body and the roof.

«PTC «ERDE TOOLS» has the capacity to manufacture core barrels with diameters of 350 mm up to 2,000 mm for any drilling rigs with kelly boxes of 100*100 mm to 200*200 mm.

Core cutters

Core barrels

Core barrel KRR Ø 780 mmat our Company exhibition booth. STT 2013

Core cutter is a tool designed for cutting holes through mass concrete and thick rocky soil layers. In the course of the work, soil in the form of a core can accumulate in the core cutter body; after cutter pulling out of the well, the soil is tapped out through windows in the body and roof.

6. Core barrels and cutters

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 34: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

34

Core barrel KRR

Ø780 mm

Ø780 mm

Ø780 mm

Core barrel -

progressive KRRP

Ø1350 mm

Cross cutter KRRX

Ø780 mm

Core cutter KR Core cutter

with replacable teeth KRD

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Core barrels and cutters

Page 35: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

35

KRR

KRRP

KRRX

KRRC

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Core barrels and cutters

Table of featured core barrel types

Designation Type of the cutting part Tooling Main application

core barrel

progressive core barrel (”predator”)

cross cutter

core barrel with roller bits

RSh 38/30-60L65/19

RSh 38/30-60L70/22

Hard fractured rock (used for drilling ground of categories 5-9)

RSh 38/30-60L65/19

RSh 38/30-60L70/22

Hard fractured rock (used for drilling ground of categories 5-9)

RSh 38/30-60L65/19

RSh 38/30-60L70/22

Rock pilot

Hard fractured rock (used for drilling ground of categories 5-9)

Roller bit on a support

It is intended to cut annular holes in strong rock with density ranging from 100 to 250 MPa

Page 36: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

36Pilling works Ø 620 mmCS «Kazachya» (2013)

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 37: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

37

7. Belling buckets

Ø 1350/3000 mm

Belling bucket

Belling bucket is a tool designed for producing bored piles with enlarged base area into cohesive soils; can only be used with casings.

During operation the loosened soil enters open shell sections. The soil is removed through manually opened bottom. For equal enlargement and prevention of excessive soil shearing in the well, the bell opening is adjusted step by step.

«PTC «ERDE TOOLS» manufactures the following standard sizes of belling buckets: Ø 410/800 mm, Ø 520/1,200 mm, Ø 650/1,400 mm, Ø 700/1,500 mm, Ø 780/1,700 mm, Ø 900/2,000 mm, Ø 1,060/2,500 mm, Ø 1,350/3,000 mm, Ø 1,500/3,500 mm.

Belling bucket Ø1060/2500 mmat our Company exhibition booth. STT 2013

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

The profile of the pile foot after enlargement

Page 38: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

38Consrtuction site of «Zenit» Stadium, Saint Petersburg (2008)

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 39: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

39

8. Chisels and

Chisel

Ø750 mm, 11 t

Hammer grab

Ø900 mm

Chisel is a tool for breaking down rocky soils up to grade 10 through free dropout. It is applied for cast-in-place piling installation by cable-tool drilling and crushing rock inclusions resistant to rotary drilling. Used in combination with a grab. The chisel is distinguished by profile geometry, a centering bucket, weight and length.

«PTC «ERDE TOOLS» designs and manufactures chisels of any design required by the customer weighing up to 15 tons.

Hammer grab is a tool designed to remove loose soil or rock pre-crushed by the chisel from well bottomhole; it is used at cable-tool drilling rigs. We also overhaul grabs of different purpose, manufacture scoops, elements and parts.

Chisels

Hammer grabs

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

hammer grabs

Page 40: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

40Concreting of Ø1500mm pile

on construction site of «Zenit» Stadium, Saint Petersburg (2008)

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 41: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

41

9. Tremie equipment

«Zenit Stadium, Saint Petersburg(2008)

The tremie method is used for well concreting in water-logged soils as well as for concreting of building structures of any purpose where concrete delivery height (free dropout) exceeds 3 meters in order to avoid concrete mixture segregation.

Standard tremie pipes diameters are 219 mm, 245 mm, and 325 mm. Any other diameters are also manufactured on client’s request.

The volume of the tremie funnel depends on well depth, its diameter, and minimal volume of the first concrete batch, as well as on displaced fluid volume; it equals 0.2 to 3 m.

The tremie set includes a tremie funnel, tremie pipes with length of 1 to 6 m, a tremie holder, a lifting cap and spare parts.

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

«

Page 42: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

42

Tremie equipment

Lifting capTremie funnel

Tremie pipe

Ø325 mm - 1 m

Tremie pipe

Tremie cassette

Wire

Ø325 mm - 2 m

Tremie holder

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 43: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

43

Unit is a platform-mounted lifting gear. The platform is installed on the elements of the foundation pile with a crane. The unit’s two winches carry out lifting and hoisting operations.

The complete UVPT 55 unit includes a rack of 12 concreting pipes 4.5 m long each, a string tip designed to prevent pipe string gripping on pile reinforcing cage elements, and a lifting link for reliable locking of tremie pipe to the winch.

UVPT 55

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

UVPT 55

Basic specifications of UVPT 55

Load capacity, kg 6400

Pipelifting/lowering speed, m/min 7.5

Speed of pipe transfer from cassette to pile, s 5

Weight of rig with a set of tremie pipes 7000

Rated power of hoist’s electric motor, kW 11

Width, mm 2500

Length, mm 5500

Height above pile cut-off, mm 6900

Tremie equipment

Page 44: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

44UVPT 55

Unit functionality:

- extracting tremie pipes from the rack and transferring them to the support frame for string assembly;

- sinking the pipe string into the pile;

- stabilising the string for concreting;

- lifting the string during concreting;

- dismantling the string and transferring the pipes to the rack.

Tremie pipes are handled with the lifting link. The unit is equipped with height-adjustable supports. After centering on the pile the platform must be put into horizontal position by a crane, and platform supports must be adjusted by resting them on foundation pile elements.

Based on the terms of reference agreed upon with the Customer, our experts will promptly design and manufacture tremie pile concreting units of other sizes and with other design features.

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Tremie equipment

Page 45: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

45Design bureau of «PTC «ERDE TOOLS» LLC

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Page 46: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

46

10. Wear and

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

spare parts

Spare parts for casings and drilling tools

Spare parts comprise all cutting and coupling components of the drilling tools and casings: flat teeth, reinforced flat teeth, round shank chisels, standard flat pilots or rock pilots, casing screws, rings, etc.

Each worn out tooth, chisel or pilot must be completely replaced. If a rock pilot’s condition is satisfactory, it can be restored at the site of operations.

Upon request, we can manufacture coupling components of casings produced by any manufacturer, as well as cutting pieces of drilling tools with any geometry and parameters.

Page 47: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

ET 01.02.04 ET 01.01.04ET 01.01.09

47

ET 01.01.08 ET 01.02.08 ET 01.01.21

ET 01.01.13

ET 01.01.22

ET 01.02.01 ET 01.02.03 ET 01.01.12

ET 01.03.04 ET 01.03.05 ET 01.03.01 ET 01.03.10 ET 01.03.11

ET 01.01.01 ET 01.01.02

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Spare parts.

For drilling tools

Square shank Reinforced square Flat tooth Clip of a flat Reinforced round Cylindrical holder

flat tooth shank flat tooth holder tooth shank flat tooth of a flat tooth

Large core barrel weld-on tooth

Cylindrical holder of a round shank chisel

Round shank chisel holder with bracket

Small core barrel weld-on tooth

RSh 38/30-60L65/19

RSh 38/30-60L70/22

Roller bit on a support

Flat pilot Pilot's bolt with washer

Pilot's socket Four-tooth rock pilot

Three-tooth rock pilot

Page 48: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

41

ET 02.01.03 ET 03.05.01 ET 03.04.01ET 03.06.01ET 03.06.02ET 02.02.01

ET 03.03.01

ET 03.02.02 ET 03.01.02 ET 03.01.03 ET 03.02.03

ET 03.03.02 ET 03.03.03 ET 03.01.01ET 03.03.10 ET 03.07.01

ET 02.01.01

48

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Spare parts.

For casings and casing adapters

Casing adapter slide lock

Casing adapter clip

Casing adapter lock

Casing key (Type I, 40x60 mm) (Type II, 60x150 mm)

Conical ring (different for each diameter of casing)

Thread ring (different for each diameter of casing)

Thread ring Casing screw

Casing screw 40 (Type I, for casings ∅620-1300 mm)

Casing screw 50 (Type II, for casings ∅1500 mm)

Casing wrench

Weld-on tooth

Cover plate CASAGRANDE

Key CASAGRANDE Replaceable tooth

Replaceable tooth holder

Page 49: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

49

11. Contacts

con

ten

t

CATALOGUE

OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com

Production facility of «PTC «ERDE TOOLS» LLC

Malafeeva Valentina

Export department, «PTC «ERDE TOOLS LLC

Russia, Yekaterinburg st. Lenina 69/7, of. 366Tel: +7(343) 379 08 24

[email protected]

www.erde-tools.com

«

Page 50: CATALOGUE OF DRILLING TOOLS AND EQUIPMENT€¦ · Casing oscillator CO-1500-02 technical data Nominal casing diameter, mm Clamping force, kN Lifting force, kN Torque, kNm Stroke,

CATALOGUE OF DRILLING TOOLS

AND EQUIPMENT

www.erde-tools.com