-
7/22/2019 CDP CDP+A 2012 r2 new
1/7
(1-1)CDP CDP+ AUTOCOM CDP+ 2012 Update manualInstallation(please
off internet now,finished then you can use internet):
1.Run Star
2.Input ID,hardware and serial as below
CDP CARS ID: a-710-479 HARDWAREKEY: JJKLPRJKVIBP SERIAL:
20418
If sn is 30250,pls reader(2-2)
CDP TRUCKS ID: a-710-245 HARDWAREKEY: GMGXLBSUGEXA SERIAL:
20418
If sn is 30250,pls reader(2-2)
CDP+ CARS ID: a-710-142 HARDWAREKEY: EYGRNVNMRBAO SERIAL:
100251
CDP+ TRUCKS ID: a-710-210 HARDWAREKEY: VTLOAGIDAIWF SERIAL:
100251
install
START.EXE run start.exe
input id
-
7/22/2019 CDP CDP+A 2012 r2 new
2/7
input serial number
-
7/22/2019 CDP CDP+A 2012 r2 new
3/7
Regirst
Run diagnose program
-
7/22/2019 CDP CDP+A 2012 r2 new
4/7
Click active via usb stick
marual mode click manual mode
Save file
Save file
-
7/22/2019 CDP CDP+A 2012 r2 new
5/7
Then send the fileactivatiom.xml back to us, including your
serial number send to us for active.
We send back the fileactivation.xml ,then you open
file.finished!!!
(2-2)----Changed Serial number update
Attention: Below serial number has been put into black list, it
is unstable when use. Here is
manual tell you how to change serial number:
2152, 7306, 1985, 39071, 55296, 30250
Run SN in cd path
-
7/22/2019 CDP CDP+A 2012 r2 new
6/7
Read your machine serial number such as 30250
Write new serial number 20418
Then begin install and regirst.
Update
Hardware setup
-
7/22/2019 CDP CDP+A 2012 r2 new
7/7
Choose USB then test
It remind you update.
Click update.
Update ok.
Congratulations! Now you can use 2012R1/2012R2 software. After
you update, you can not use
2011 software again, please notice.
