Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
www.mossled.com1.800.924.1585 - 416.463.6677
[email protected] WWW.MOSSLED.COM
MOSSFlexible LED Tape
FlexLED
The data definitions for strobe channel are as follows:
{0, 7}, //undefined{8, 65},//slow strobe ->fast strobe{66, 71},//undefined{72, 127},//slow push fast close{128, 133},//undefined{134, 189},//slow close fast push{190, 195},//undefined{196, 250},//random strobe{251, 255},//undefined
A.001 CH 05 B 16 PF 01 9A 1.5 DP 1.1
Default SettingsRestore to Factory Default Settings
Press and hold down both “Menu” & “Enter” keysuntil the digital display turns off, then release the keys. The system will reset and the digital display will turn onagain. All settings will be restored to factory default.
The supported RDM PIDs are as follows:
DISC_UNIQUE_BRANCH SLOT_DESCRIPTIONDISC_MUTE MANUFACTURER_LABELDISC_UN_MUTE SUPPORTED_PPARAMETERSDEVICE_INFODMX_START_ADDRESSIDENTIFY_DEVICESOFTWARE_VERSION_LABELDMX_PERSONALITYDMX_PERSONALITY_DESCRIPTIONSLOT_INFO
D MX a ddr e s s i s 0 01, C H 04
DMX ConsoleSlider number
DMX channel
dp1.1 dp2.1
1 for output 1 dimming
2 for output 2dimming
for output 1micro dimming
dp5.4
for output 1dimming
for output 2dimming
3
4 for output 2micro dimming
for output 3dimming
for output 2dimming
dp6.4
for output 1dimming
for output 2dimming
5
6 for output 3micro dimming
for all outputmaster dimming
for output 3dimming
for all outputmaster dimming
for output 3dimming
for output 1 dimming
for output 4&5dimming
for output 3dimming
for output 4&5dimming
7
8 for output 4&5micro dimming
for output 4&5 dimming
strobe effects
for output 4&5dimming
D MX a ddr e s s i s 0 01, C H 05
DMX ConsoleSlider number
DMX channel
dp1.1 dp2.1
1 for output 1 dimming
2 for output 2dimming
for output 1micro dimming
dp6.5
for output 1dimming
for output 2dimming
3
4 for output 2micro dimming
for output 3dimming
for output 2dimming
dp7.5
for output 1dimming
for output 2dimming
5
6 for output 3micro dimming
for output 5dimming
for output 3dimming
for output 5dimming
for output 3dimming
for output 1 dimming
for output 4dimming
for output 3dimming
for output 4dimming
7
8 for output 4micro dimming
for output 4dimming
for all outputmaster dimming
for output 4dimming
9
10 for output 5micro dimming
for output 5dimming
for output 5dimming
for all outputmaster dimming
strobe effects
DO NOT install with power applied to device.DO NOT expose device to excessive moisture.
Indoor use only.! !
Display Input Voltage
Number of
Channels
InputSignal
Controller
LCD12V24V5CHDMXCONT
Weight300g
10.5 ozKg
DimensionsL 164mm 6-9/20”W 73mm 2-7/8”H 38mm 1-1/2”
Temperature Range-200C to +700C-40F to +1580F
IP Rating IP 20
UL ComponentRecognizedE501896
DMX RDMManual ModeDMX5125 Channel
512
DMX
Resolution 8 Bit & 16 Bit
PWM Frequency 500Hz to 35KHz
Output12V to 24V DC
8A per Channel480 Watts/960 Watts
Input40A MAX
12V to 24V DC
DMX OK
V. 3.0
5 CHANNEL X 8 AMP DMX512 DECODER
CINQUE-LED DMX DIMMER
= Set # of Channels (Default @ 5)
= Manual Mode
= Resolution (Default @ 8 BIT)
= PWM Frequency (Default @ 1kHz) (00=500Hz ~ 35=35kHz) ( Set @ 08=8kHz for flicker-free on most camera settings )
= Gamma Curve (Default @ 1.5)
= Decoding Mode (Default @ 1.1)
= DMX Decoder Mode
E501896
MODEL # : CONTDMX5CH12V24VLCD
5 Pin XLR DMX In/Out
Digital DisplayPhoenix DMX in/Out
RJ45 DMX In/Out LED Output
DC Power In
164.00 mm
73.0
0 m
m
38.00 mm
Introducing our most advanced standalone
DMX Dimmer ever!Simply put, the
is fantastic.
All the features our film, television, and
theatrical friends have been asking for have been included. High current rating, smooth dimming, adjustable PWM frequency, 8 bit and 16 bit options,
full manual mode, RDM control, XLR 5 & RJ45 connections,
protect-a-FET technology, as well being UL component recognized.
V 3.05 CHANNEL X 8 AMP DMX512 DECODERCINQUE-LED DMX DIMMER
PROTECT-A-FET
Please Scan QR CodeFor Latest Information
Regarding Cinque
D MX a ddr e s s i s 0 01, C H 01
DMX ConsoleSlider number
DMX channel
dp1.1 dp2.1
1 for all outputdimming
for all outputdimming
2 No use for all outputmicro dimming
D MX a ddr e s s i s 0 01, C H 02
DMX ConsoleSlider number
DMX channel
dp1.1 dp2.1
1 for output 1&3 dimming
2 for output 2,4&5 dimming
for output 1&3micro dimming
dp3.2
for output 1&3dimming
for output 2,4&5 dimming
for output 1&3 dimming
3
4 for output 2,4&5micro dimming
for all outputdimming
for output 2,4&5 dimming
D MX a ddr e s s i s 0 01, C H 03
DMX ConsoleSlider number
DMX channel
dp1.1 dp2.1
1 for output 1 dimming
2 for output 2dimming
for output 1micro dimming
dp4.3
for output 1dimming
for output 2dimming
3
4 for output 2micro dimming
for output 3,4&5dimming
for output 2dimming
dp5.3
for output 1dimming
for output 2dimming
5
6 for output 3,4&5micro dimming
for all outputdimming
for output 3,4&5 dimming strobe effects
for output 3,4&5 dimming
for output 1 dimming
for all outputmaster dimming
for output 3,4&5dimming
for all outputmaster dimming
Select menu , press “ENTER” the display will flash. Press “UP/DOWN” to choose the decoding mode. Press “BACK” to confirm.
6. Decoding ModeDMX Value
>1
<1
1.0
1.52.5
3.56.5
0.90.9
0.8
Out
put
Bri
ght
ness *Gamma adjusts the dimming curve of
the unit so you can have an extremely high resolution low end or an extremely high resolution high end.
Select menu , press “ENTER” the display will flash. Press “UP/DOWN” to choose 0.1 to 9.9. Press “BACK” to confirm.
5. Gamma Curve Value
20 = 20KHz25 = 25KHz35 = 35KHz
14 = 14KHz 16 = 16KHz18 = 18KHz
09 = 9KHz10 = 10KHz12 = 12kHz
06 = 6KHz 07 = 7KHz08 = 8KHz
03 = 3KHz04 = 4KHz05 = 5KHz
00 = 500Hz01 = 1KHz02 = 2KHz
Select menu , press “ENTER” the display will flash. Press “UP/DOWN”to choose from 00 to 30. Press “BACK” to confirm.
4. PWM Frequency
Select menu , press “ENTER” the display will flash. Press “UP/DOWN”to choose 8bit or 16bit. Press “BACK” to confirm.
3. Resolution
Example: DMX address is set to 001.CH01 = DMX address for all channels is 001CH02 = DMX address 001 for channels 1&3. DMX address 002 for channels 2, 4&5CH03 = DMX address 001&002 for channels 1, 2. DMX address 003 for channels 3, 4&5 CH04 = DMX address 001&002&003 for channels 1, 2&3. DMX address 004 for channels 4&5CH05 = DMX address 001,002,003,004&005 for channels 1, 2, 3, 4 ,5 respectively
Select menu , press “ENTER” the display will flash. Press “UP/DOWN”and set the DMX channel quantity. Press “BACK” to confirm.
2. Set Channel Quantity
To set the DMX address select menu , press “ENTER” the display will flash. Press “UP/DOWN”to set the DMX address. Press “BACK” to confirm.
1. Set DMX Address
P.XXX
XX to XX
B XX
S XX
R N 2
1
Switch between DMX Mode and Manual Mode
Program speed 1 to 16
Program brightness 1 to 8
Manual control over channels 1 to 5 from 00 to FL5
Program 1 to 31. P01 channel 1 is on P02 channel 2 is on etc...
To enter Manual Mode use the “UP/DOWN” and set to “ ” press “ENTER” then with the “UP” button set to “ ”. Press “BACK” to confirm. It will enter the run2 mode. You no longerneed to power cycle the unit! The following menu will apear.
Manual Mode (Master Mode)
When a short circuit occurs all the outputs will stop functioning and the LED display with flash. Power cycle it (turn it off then on again) to restore normal operation.
Protect-A-FET
A.XXX
CH XX
B XX
PF XX
9A XX
DP XX
R N1Decoding mode, default set to dP1.1
Switch between DMX Mode and Manual Mode
Dimming gamma curve value, default set to1.5
PWM frequency 500Hz to 35KHz, default set to 1KHz
Bit resolution 8bit/16bit, default set to 16bit
DMX channel quantity, default set to CH05
DMX address 1 to 507, default set to 001. The decimal after the “A” indicates reciving a DMX signal.
Using the “Up/DOWN” buttons you can cycle through the following menus.
DMX Mode (Decoder Mode)
OPERATION
+RGBW
+
_
DMX Console
Decoder Mode
+RGBW
+
_
+RGBW
+
_Master Mode
WIRING DIAGRAM