CISCO 200-001 EXAM QUESTIONS & ANSWERS · CISCO 200-001 EXAM QUESTIONS & ANSWERS Exam Name: Implementing Cisco Video Network Devices (VIVND) Certdumps QUESTION 1 What is the importance

CISCO 200-001 EXAM QUESTIONS & ANSWERS

Number: 200-001Passing Score: 800Time Limit: 120 minFile Version: 42.2

http://www.gratisexam.com/

CISCO 200-001 EXAM QUESTIONS & ANSWERS

Exam Name: Implementing Cisco Video Network Devices (VIVND)

Certdumps

QUESTION 1What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints?

A. It is the IPv4 address of the default gateway for the subnet that the video endpoints is connected to.B. It is the configured SIP register and proxy server.C. It is the unique NTP server IPv4 address.D. It is the unique NTP server IPv4 address.E. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting.F. Option 150 is not importance.

Correct Answer: ESection: (none)Explanation

QUESTION 2You have been informed from the field that a new Cisco TelePresence video endpoint has been deployedwith an IPv4 address of 172.28.254.45. You need to check for connectivity from the Cisco UnifiedCommunications Manager server. Which command should be entered to check for network connectivity?

A. Utils network traceroute newsystem.domain254.localB. Utils network host cucum.osl147.localC. Traceroute 172.28.255.255D. Ping 172.28.254.45E. Utils network ping 172.28.254.45


QUESTION 3What is the optimum distance for a person sitting using the Cisco TelePresence System 500?

A. 1.2 meters and 1.8 meters (4 and 6 feet)B. 0.5 meters and .75 meters (1.5 and 2.5 feet)C. 3.0 and 5.0 meters (10 and 15 feet)D. The camera can adjust automatically

Correct Answer: ASection: (none)Explanation

QUESTION 4Which three Cisco TelePresence multipoint media conferencing platforms can utilize Cisco UnifiedCommunication Manager for call control? (Choose three)

A. Cisco TelePresence ServerB. Cisco TelePresence Multipoint Control UnitC. Cisco TelePresence SX20D. Cisco TelePresence Media Bridge ServerE. Cisco TelePresence System 500-32F. Cisco TelePresence Multipoint Switch

Correct Answer: BEF

Section: (none)Explanation

Explanation/Reference:"First Test, First Pass" - www.lead2pass.com 4Cisco 200-001 Exam

QUESTION 5Which configuration is needed in the order for Cisco Jabber Video for TelePresence to initiate Multi waycalls?

A. Configure the Multi way URL address under Cisco TelePresence Video Communication Server >Systems > provisioning > Users > Configuration Template.

B. Configure the Multi way URI address TelePresence Management Suite > Systems > Provisioning >Users > Configuration Template.

C. The Cisco Jabber Video for TelePresence only supports Multisite calls, which is the enabled by default.D. Configure the Multi way address under Video Settings in the Cisco Jabber Video for TelePresence

client.


QUESTION 6Which statement is correct regarding the difference between Multisite and Multi way conferencing?

A. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipoint unit.

B. Multisite requires configuration on the endpoint, whereas Multi way requires the Multi way options key tobe installed.

C. Multisite requires the presence of a multipoint control unit, whereas Multi way relies on the endpointconferencingcapacity.

D. Multisite is used to Conference in multiple sites, whereas Multi way is initiate multipoint conferencing


QUESTION 7When scheduling a multipoint conference, which three devices are required for the conference to bescheduled and completed successfully? (Choose three)

A. Cisco Unified Communication ManagerB. Multipoint control unitC. Cisco Unity ConnectionD. Video conferencing endpointsE. Cisco Unified IM and Presence

Correct Answer: ABDSection: (none)Explanation

Explanation/Reference:


QUESTION 8A user wants to use the one Button to Push on a TelePresence System 500 32 Video endpoint. Whichconfiguration tool should be used to allow the One Button in Push feature to work?

A. Cisco TelePresence Video Communication Server, new conference, calls, One Button to Push.B. Active Directory server, users, new conference, One Button to PushC. Cisco Giga switch Router, Call Manager Express. One Button to PushD. Cisco Unified Communications Manager server, photos, devices, One Button to PushE. Cisco TelePresence Manager Suite server, new conference, set Conference type to one Button to Push


QUESTION 9Which two Cisco TelePresence systems would be appropriate for an execute personal office? (Choosetwo)

A. Cisco TelePresence System 500B. Cisco TelePresence EX SeriesC. Cisco JabberD. Cisco Jabber Video for TelePresenceE. Cisco IP Video Phone E20

Correct Answer: ABSection: (none)Explanation

QUESTION 10You have been informed from the field that a new Cisco TelePresence video endpoint has been deployedwith an IPv4 address of 172.28.256.45. Which three devices could you use to see if the endpoint is requiredand available for a call? (Choose three)

A. Cisco TelePresence Video Communication ServerB. Cisco 3250 Layer 2/3 SwitchC. Active Directory ServerD. Cisco Giga Switch RouterE. Cisco Unified Communications Manager serverF. Cisco TelePresence Manager Suite server

"First Test, First Pass" - www.lead2pass.com 6Cisco 200-001 Exam

Correct Answer: ACFSection: (none)Explanation

QUESTION 11

Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose two)

A. The username and password in Cisco Jabber phone services are misconfigured.B. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified

Communication Manager.C. The Cisco Unified Communication manager IM and Presence Services is not available.D. The Cisco Jabber does not have the correct phone button template and hence cannot register to the

Cisco Unified Communication Manager.E. The Cisco Jabber initial audio and video settings to be set.F. The called user presence status is unknown.


Correct Answer: BDSection: (none)Explanation

QUESTION 12Refer to the exhibit. Which two settings that could be dialed to start a multipoint conference that is hostedby the multipoint control? (Choose two).

A. Ex90@cost147 localB. 5919C. Ex90@osl148 localD. Mcu8510@osl147 localE. ex90F. 52900121


QUESTION 13Refer to the exhibit. Which SIP URI should be dialed in order to reach the endpoint that is registered withthe IP address 172.29.1.221 from another endpoint with a URI of sip e20@dca test?


A. ex90@ost148 localB. ex90C. sip ex90@osl147 localD. 172.29.1.221E. 529000121

Correct Answer: CSection: (none)Explanation

QUESTION 14Instructions:To access the multiple-choice question, click on the tab titled "Question" on the bottom of the panel.Scenario:In this item, you will need to use all information presented to you to successfully answer the question.





The EX90 Series endpoint (codec) fails to register its H.323 aliases with the VCS that is located in adifferent network. The EX90 has successfully registered its SIP URI with another VCS in remote network.Based on the exhibits, what could be causing the issue?

A. The codex has the wrong domain name.B. The Cisco Unified Communication Manager does not see the registration request.C. The VCS does not see the registration request.D. The codec has duplicate H.323 aliases that are already registered with the VCS at 172.31.221.70.

Correct Answer: DSection: (none)Explanation

QUESTION 15Refer to the exhibit. You have just finished installing a 65-inch profile system in a multipurpose room. Afterpowering up entire system, only one display is used. Using the information in the exhibit, why is the seconddisplay not displaying anything from the system?


A. The dual display option key has not been input into the codec.B. The codex has the appropriate option keys installed, so entire the display is not cabled correctly, the

codec is configured correctly, the codec is configured incorrectly, or there is no input being sent to thedisplay.

C. The Cisco TelePresence profile systems do not support dual display.D. The display is not powered on.


QUESTION 16Instructions:To access the multiple-choice question, click on the tab titled "Question" on the bottom of the panel.Scenario:In this item, you will need to use all information presented to you to successfully answer the question.



A.

B.C.D.

Correct Answer: Section: (none)Explanation

Explanation/Reference:Local NS WebServer Edit

QUESTION 17When placing a call from Cisco Jabber Video for TelePresence to the Cisco TelePresence System CodecC40, which FECCs are available?

A. Left, right, up, down, zoom-in, and zoom-out are all availableB. Only up and down are availableC. No FECO is availableD. Only left and right are available


QUESTION 18Refer to the exhibit. Under which tab can the registration status for the endpoint be found?


A. DiagnosticsB. ConfigurationC. MaintenanceD. Call control


QUESTION 19Which of these is the core component of the Cisco Video Surveillance product suite that handles recordingand serving of video feeds?

A. Cisco IP cameraB. Video Communication ServerC. Cisco Video Surveillance Operations ManagerD. Cisco Video Surveillance Media Server

Correct Answer: ADSection: (none)Explanation

QUESTION 20Refer to the exhibit. Under which tab can the log file for the endpoint found?

A. Call ControlB. ConfigurationC. Diagnostics


D. Maintenance


QUESTION 21Refer to the exhibit. You must dial the interaction response system of the multipoint control unit. What arethe appropriate dual-tone multi-frequency digits to create an ad-hoc conference with an identifier of 2345?

A. 2345B. 5919 * 2345#C. 5919* 2345D. 2345#

Correct Answer: BSection: (none)Explanation

QUESTION 22Instructions:This item contains one question that you must answer. You can view this question by clicking on thecorresponding button to the left. In order to complete the question, you need to refer to the scenario, thetopology, and the exhibits at the bottom of the screen.Scenario:In this item, you will need to use all information presented to you to successfully answer the question.




The Cisco TelePresence Codex C90 is unavailable to call the Cisco IP Video Phone Assuming that thecalling search space has been configured correctly, which of these can cause this issue?

A. The Cisco TelePresence Codec C90 can only be registered to a Cisco TelePresence VideoCommunication Server.

B. A multipoint control unit is required in order for the call to work.C. The Cisco TelePresence Codex C90 can only be registered as a SIP endpoints Cisco Unified

Communication Manager H.323 us not supported.D. URI dialing has not been configured on a Cisco Unified Communications Manager.


E. The Cisco TelePresence Codec C90 Profile 1> Call Setup Mode must be configured as a gateway sinceCisco Unified Communications manager Does not have a gatekeeper functionality.

F. The Cisco TelePresence Codec C90 is not registered as a SIP endpoint on Cisco UnifiedCommunications Manager. The Cisco TelePresence Codec C90 needs to be registered as both SIPand G. 323.


QUESTION 23What is the main difference between a Cisco TelePresence Multipoint Control Unit and a CiscoTelePresence Multipoint Switch?

A. The Cisco TelePresence Multipoint Control Unit us a hardware bridge. The Cisco TelePresenceMultipoint Switch is a software bridge.

B. The Cisco TelePresence Multipoint Contact Unit is a software bridge for immersive and non Immersiveendpoints. The Cisco TelePresence Multipoint Switch is a hardware bridge for non- immersiveendpoints.

C. The Cisco TelePresence Multipoint Control Unit has a latency of 100 ms.D. The Cisco TelePresence Multipoint Control Unit delivers automatic voice activated switching. The Cisco

TelePresence Multipoint Switch provides active presence.


QUESTION 24Refer to the exhibit. When the Cisco Jabber Video for TelePresence Fails to register with the server, whichtwo fields should be configured at a minimum, assuring SRV records are not configured? (Choose two)


A. The SIP domainB. The IP address of the Cisco TelePresence Management Suites for the internal serverC. The internal DNS server name for the Cisco TelePresence management SuiteD. The IP address of the Cisco Unified Communication Manager for the internal server

E. The internal or external DNS server name for the Cisco TelePresence Video Communications Server

Correct Answer: ADSection: (none)Explanation

QUESTION 25Which Cisco TelePresence multipoint platform utilizes only Cisco Unified Communication manager for callcontrol?

A. Cisco TelePresence Media Bridge ServerB. Cisco TelePresence ServerC. Cisco TelePresence System 500-32D. Cisco TelePresence SX20E. Cisco TelePresence Multipoint SwitchF. Cisco TelePresence Multipoint Control Unit



QUESTION 26Which two additional items must be configured for an endpoint to register manually with the CiscoTelePresence Video Communication Server SIP to function correctly? (Choose two)

A. Unique system IDB. H.323 IDC. Configured SIP register and proxy serverD. SIP uniform resource indicatorE. NTP server IPv4 addressF. E.164 alias

Correct Answer: CDSection: (none)Explanation

QUESTION 27While performing a password recovery on a Cisco TelePresence endpoint, what is the maximum amount oftime for input to be received by the device before the system exits the password recovery mode?

A. 20 secondsB. 60 secondsC. 40 secondsD. 30 secondsE. 15 seconds


QUESTION 28Refer to the exhibits. The screenshots show output from the xStatus of a Cisco TelePresence endpoint andthe VCS registration. What are the protocol and direction of the call, the called party, and the transmit rate

of the call?


A. h.323, incoming, 5019* 2346, 1152 kbp/sB. h.323, outgoing, 5919* 2345, 1152 kbp/sC. h.323, incoming, 5919* 2345, 1152 kbp/sD. sip, incoming, 5919* 2345, 768 kbp/sE. sip, outgoing, 5919* 2345, 768 kbp/s


QUESTION 29Which of these needs to be enabled in Cisco Unified Communication in order for the Cisco TelePresencesystem 500-32 to be able to share a presentation with a Cisco TelePresence System C40 endpoints that isregistered to a VCS?

A. Allow presentation sharing using H.323B. Allow presentation sharing using BFCPC. Send send-receive SDP in mid-call inviteD. Deliver conference bridge identifier

E. Allow iX application media


QUESTION 30What are the best practices for maintaining a high-quality video call regarding latency, jitter, and packetloss?


A. 500-ms one-way delay, 50-ms jitter, 5 percent packet lossB. Less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet lossC. 20-ms one-way delay, no jitter, no packet lossD. 150-to 400-ms one-way delay, 50-ms jitter, 5 percent packet loss


QUESTION 31Which component of the Cisco TelePresence multipoint media infrastructure is intended for use only withnon-immersive endpoints?

A. Cisco TelePresence System 500-32B. Cisco TelePresence Multipoint SwitchC. Cisco TelePresence Multipoint Control UnitD. Cisco TelePresence Server


QUESTION 32Which two systems would be an appropriate solution for a traveling employee? (Choose two)

A. Cisco IP Video Phone E20B. Cisco TelePresence System 500C. Cisco TelePresence EX SeriesD. Cisco JabberE. Cisco C-Series codesF. Cisco Jabber Video for TelePresence

Correct Answer: DFSection: (none)Explanation

QUESTION 33Which statement is true about Cisco TelePresence System 500-32 system regarding the HVAC needs forthe room where it is installed?

A. You must supply a room that has energy-efficient lighting to reduce the temperature of the room.B. The system does not require any additional requirements above the normal HVAC requirements for the

roomC. You must supply addition cooling requirements for the room.D. The temperature of the room will be 10 to 20 degrees warmer than the rest of the building


QUESTION 34Which two additional items can be configured for an endpoint to register with the Cisco TelePresence VideoCommunications Server for H.323 to function correctly? (Choose two.)

A. unique DNS entry IDB. unique E.164 aliasC. unique NTP server IPv4 address


D. unique H.323 IDE. unique real-time transport protocol port numbersF. unique system ID


QUESTION 35Which Cisco Video Surveilleance device is responsible for providing video stream to monitors after therespective layouts and views are received by the monitors?

A. Cisco Video Surveillance Media ServerB. Cisco Video Surveillance ManagerC. Cisco IP Video Surveillance Operations ManagerD. Cisco IP Video Surveillance Virtual Matrix Viewer


QUESTION 36What is correct order of steps to schedule a One Button to Push conference call between a CiscoTelePresence 500 and a Cisco TelePresence Codec C40?

A. Configure the One Button to Push field under device configuration for the Cisco TelePresence System500 and Codec C40.

B. Configure One Button to Push under Cisco TelePresence Video Communications Server > Application> OBTP Configuration.

C. Configure a new conference under Cisco TelePresence Management Suite > Booking New Conference> Type.

D. Configure the Scheduler tool in the Cisco TelePresence Management Suite.E. The One Button to Push feature cannot be configured without a scheduling plug-in application plug-in

application such as Microsoft Outlook.


QUESTION 37Which of three devices require configuration in order for an endpoint to initiate a Multiway conference?

A. Endpoint onlyB. Endpoint, Cisco TelePresence Video Communications Server, and multiple control unitC. Multipoint control unit onlyD. Endpoint and multipoint control unit onlyE. Endpoint and Cisco TelePresence Video Communications Server onlyF. Cisco TelePresence Video Communications Server only


QUESTION 38Refer to the exhibit. Which tab can be used in order to check the call statistics for the Cisco TelePresenceCodec C60?


A. ConfigurationB. MaintenanceC. DiagnosticsD. Call controlE. The GUI cannot be used to view call statistics


QUESTION 39Threat monitoring in physical access security can be based upon which three of these? (Choose three)

A. WeatherB. FingerprintsC. BadgesD. AgeE. DoorsF. Height

Correct Answer: BCFSection: (none)Explanation

QUESTION 40During the initial setup of Cisco TelePresence System 500, you are required to do an initial camera setup.What might be a primary reason that the failure occurs?

A. The room is too darkB. The system is too far away from the targetC. The camera cannot focus on the targetD. The cable to the camera is not connected correctly


QUESTION 41Which two of these support an ad-hoc conference call? (Choose two)

A. Using the booking tab in the Cisco TelePresence Maintenance State to configure a new conferenceB. Using the Cisco TelePresence Management Suite Scheduler to schedule a conference call to start in 5

minutes.C. Using the tab Administrative Tools > Configuration > Conference Settings on the Cisco TelePresence

Management Suite.D. Pressing the conference button on Cisco Unified IP Phone 8941 conference in a third call.E. Cisco TelePresence Multi way with Cisco TelePresence Multipoint Control Unit and Cisco TelePresence

Video Communication Server."First Test, First Pass" - www.lead2pass.com 30Cisco 200-001 Exam


QUESTION 42Which three of these are valid ways to initially configure a C-Series codec in a network where DHCP is notused? (Choose three)

A. Secure web browserB. TelnetC. Tandberg Remote Control VD. Touch screen interfaceE. CLI using a console cableF. Secure copy program

Correct Answer: ACESection: (none)Explanation

QUESTION 43When configuring the Cisco TelePresence System 500 with IP address, where should the IP address beconfigured?

A. In Cisco Unified Communication Manager after adding the Cisco TelePresence System 500 manually.B. In the Cisco TelePresence Administration tool.C. Static IP address configuration is not possible. Only a DHCP-provided IP address is supported.D. Using the on-screen displayE. In the Cisco TelePresence System 500 was added under systems.


QUESTION 44Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video systemto a factory condition?

A. Utils system factory initB. xcommand SystemUnitResetC. xconfiguration default factoryD. utils reset factoryE. utils factory reset 2F. xcommand defaultvalues set level: 2


QUESTION 45When connecting to a pan-tilt-zoom camera to a C-Series codec, what type of cable must be used forcamera control?

A. An Ethernet crossover cable (RJ-45-to-RJ45)B. A serial cable (DB25-to-DB9)C. A VISCA cable (DB-to-RJ45)D. An Ethernet cable (RJ45-to-RJ45)


QUESTION 46Which two of these are considered to be provisioning and scheduling management tools in a CiscoTelePresence environment? (Choose two)

A. Cisco TelePresence Management SuiteB. Cisco TelePresence ManagerC. Cisco TelePresence Multipoint Control UnitD. Cisco Video Surveillance management ServerE. Cisco Video Surveillance Operations Manager

Correct Answer: ABSection: (none)Explanation

QUESTION 47What is the main difference between Cisco Jabber and Video TelePresence?

A. Cisco Jabber has no video calling capabilities, whereas Cisco Jabber Video for TelePresence has videocapabilities.

B. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence. They shouldnot coexist in the same network

C. Cisco Jabber has no presence capabilities, whereas Cisco Jabber Video for TelePresence capabilities.D. Cisco Jabber registers to the Cisco Unified Communication Manager, whereas Cisco Jabber Video for

TelePresence registers to the VCS.E. Cisco Jabber Video for TelePresence Registers to Cisco Unified Communication Manager, Whereas

Cisco Jabber Registers to the VCS.


QUESTION 48Refer to the exhibit. What can be deduced from the log shown in the exhibit, which was taken from a CiscoTelePresence Codec C60?


A. A BFCP call is being initiatedB. A direct call to 52902511 is being madeC. A Multi way call to [email protected] is being madeD. No calls are being attempted by the endpointE. The endpoint is receiving a call from VCS


QUESTION 49In an important Cisco TelePresence video multipoint call is in progress and you are getting complaints ofpixilation of the video and poor audio quality on one of the involved systems. Which


page would be a good place to start for troubleshooting the issue on the affected endpoint?

A. Option A

B. Option BC. Option CD. Option D


QUESTION 50Refer to the exhibit. Which system tab can be used to add video infrastructure devices and endpoints?

A. System OverviewB. Configuration TemplatesC. Administrative ToolsD. ProvisioningE. Navigator


QUESTION 51Instructions:To access the multiple-choice question, click on the tab titled "Questions" on the bottom of the panel.Scenario:In this item, you will need to use all information presented to you to successfully answer the question.

"First Test, First Pass" - www.lead2pass.com 37

Cisco 200-001 Exam


The C-Series endpoint (codec) does not register with the Video Communication Server that is located in adifferent network. Based on the exhibits, what could be causing the issue?

A. The subnet mask on the codec is innocentB. The IP address of the codec is incorrectC. The interface that the codec is in the wrong VLAND. The codec did not receive a DHCP address from the DHCP server


QUESTION 52Which Cisco TelePresence endpoint uses only Cisco Communication Manager as its call control device?

A. C60B. SX20C. Video Communication ServerD. EX90E. Cisco TelePresence System 500-32

Correct Answer: E

Section: (none)Explanation

QUESTION 53Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server?

A. Cisco Video Surveillance Operations ManagerB. Cisco Video Surveillance Virtual MatrixC. Cisco Video Surveillance Media ServerD. Video Communication ServerE. Cisco Video Surveillance Transcoding and Encoding Server "First Test, First Pass" -

www.lead2pass.com 40Cisco 200-001 Exam


QUESTION 54Which TelePresence Multipoint Control Unit Layout view mode gives prominence to one conferenceparticipant over the other conference participants while still allowing conference participants to view multipleparticipants at the same time?

A. enhanced continuous presenceB. continuous presenceC. active speakerD. room switchingE. speaker switching


QUESTION 55When you register the Cisco TelePresence System 500-32 video system with the Cisco UnifiedCommunication Manager, what is the most important item for the register to be input the server?

A. the IP telephone media access control address that is used to manage the systemB. the media access control address of the Ethernet port of the Cisco TelePresence System 500-32 "First

Test, First Pass" - www.lead2pass.com 41Cisco 200-001 Exam

C. The Cisco TelePresence System 500-32 will always automatically register with the Cisco UnifiedCommunications Manager server.

D. the IPv4 address of the Cisco TelePresence System 500-32


QUESTION 56Which two these can cause registration problems for a Cisco TelePresence Code C40 endpoint running inH.323 mode? (Choose two.)

A. The E.164 H323Alias has not been configured on the endpointB. The H.323 license stack is not added to the endpoint.

C. The URI address has not been configured on the endpoint.D. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS.E. The IP default gateway address is incorrect for the endpoint.

Correct Answer: AESection: (none)Explanation

QUESTION 57Instructions:This item contains one question mat you must answer. You can view this question by clicking on thecorresponding button to the left. In order to complete the question, you will need to refer to the scenario, thetopology, and the exhibits at the bottom of the screen.Scenario:Refer to the exhibit. Using the information shown, answer the question shown on the Questions tab.







*. indicates required item.**. Device reset is not required for changes to Packet Capture Mode and Packet Capture Duration. ***Note:Security Profit Contains Addition CAPF Settings. ****Note: A Protected device means it is capable of playingSecure and Non-Secure Tones. When the checkbox is checked, the user*****Note: A custom Softkey template without supplementary service Sofkeys must be used for a Hot lineDevice.







When the Cisco Jabber user tries to call extension 3501, Cisco Jabber never places the No errors ormessages are seen and no reorder lone is heard. Assuming that the Cisco Jabber calling search space isconfigured correctly in Cisco Unified Communications Manager, which of these could be causing thisissue?

A. CTI tor the end user must be enabled.B. Cisco Jabber must be reconfigured tor desktop mode.C. The username or password is misconfigured in Cisco Jabber.D. The Cisco Jabber Advanced Phone Settings are misconfigured.E. Cisco Jabber does not have the correct phone button template and hence has not registered to the

Cisco Unified Communications Manager.F. The called user presence status is unknown.G. The called user has not been added as a contact in Cisco Jabber.


QUESTION 58What two issues does utilizing an IP network storage solution for IP video surveillance help overcome?(Choose two.)

A. faster bit rate for storageB. analog to IP conversionC. large, expandable storage spaceD. scalabilityE. physical security


Correct Answer: CESection: (none)Explanation

QUESTION 59Cisco Video Communication Servers can be clustered to provide resiliency in the enterprise.What is the maximum number of cluster members?

A. 2B. 6C. 7D. 3E. 15


QUESTION 60Refer to the exhibit. When the administrator clicks the ticket number of any of the open tickets, which twoactions are presented to the administrator? (Choose two.)

A. ignore ticketB. escalate ticketC. acknowledge ticketD. delete ticketE. close ticket


Explanation/Reference:"First Test, First Pass" - www.lead2pass.com 55Cisco 200-001 Exam


Documents

CISCO 200-001 EXAM QUESTIONS & ANSWERS · CISCO 200-001 EXAM QUESTIONS & ANSWERS Exam Name: Implementing Cisco Video Network Devices (VIVND) Certdumps QUESTION 1 What is the importance