HYBRID MODE CONFIGURATION MANUAL

Kindly follow below steps to set the DVR in HYBRID mode.

1. MAIN MENUADVANCEDAC

2. Here you can set the MODE according to your need.

i) For 8 channels Analog, set as shown below figure.

ii) For 7 channels Analog and 1 channel IP, you have to set as shown below figure.

iii) For 6 channels Analog and 2 channels IP cameras, set as below figure.

3. Once you have done the above settings, right click on the first page of the DVR and open

the Remote Device.

Now you have to add the IP cameras in the IP search list.

4. Now will get the image as shown below.