Upload
shawn-xurvein
View
34
Download
0
Embed Size (px)
Citation preview
Command Tooling Systems • Phone 800.328.2197 • Fax 800.555.7694 • E-mail [email protected] • Web www.commandtool.com
• Toolholders: Collet Chucks: ER, XT, TG100 & TG150,
Shorty, High Precision, Balanceable• End Mill, Shell Mill• Reach & Rigidity (R&R) Series• Collets: External Coolant, Rubber Sealed, Steel Sealed, TG and Tap• Tapping Systems
• Precision Test Bars• Tool Carts• Retention Knobs: O-Ring, Coolant-Through• Tool Tags• Taper Checker
• BT, CT, DIN & HSK Toolholders• Inch & Metric Toolholders• Extensions from 0.125” (3mm) to 0.625” (20mm)
• Shrink-Fit Tool Changers• Several Coolant Options• Balance Options Available
ThermoLock® Shrink-Fit†
Standard Products & Accessories
Custom Products
Additional Services • Dynamometer Re-Calibration• Install Tools Into Shrink-Fit Toolholders• Repair and Service of Driven Tools
• Test Bar Certification• Custom Balance• DIN Form B
†Shrinker® is a registered trademark of Tooling Innovations, Dana Point, CA
• Extensions from 0.125” (3mm)
Rubber Sealed, Steel Sealed, TG and Tap
• Quick Quote & Product Turnaround • BT & CT 30 to CT 60• HSK25 to HSK125
• NMTB• Flange Mount Tooling
Command Tooling Systems • Phone 800.328.2197 • Fax 800.555.7694 • E-mail [email protected] • Web www.commandtool.com
• OD Turning Toolholders• Facing Toolholders• Cut-Off Toolholders• Boring Bar Holders
• U-Drill Holders• CAPTO* Tool Blocks• ABS*** Toolholders• BMT And VDI Available
• Adjustable Gear Hobbing/ Saw Toolholders
• Adjustable Angle Head
• EWS-Slot: Push Slotting Keyway Cutting in your Lathe• Custom Multi-Head Designs
Static Tools• ID Boring Toolholders• Drilling Toolholders• Collet Chuck Toolholders• Hydraulic Chuck Toolholders• Weldon/Whistle Notch
Driven Tools• Axial Milling/Drilling Tools• Radial Milling/Drilling Tools• Specials Available Upon Request
• CAPTO*• HSK
• Turning Tools• Turning Toolholders
Static Holders
EWS Varia Tool Styles
Special Application Holders
• ER Collet Holders• Weldon Shank Holders• Whistle-Notch• Multiple Gear Ratios And Offsets Available
• ABS***• CAPTO*• KM** • BMT And VDI Available
Driven Holders-Radial & Axial
• BMT And VDI Available
• Hydraulic Chuck Toolholders
• OD Turning Toolholders
Keyway Cutting in your Lathe• Custom Multi-Head Designs
Special Application HoldersSpecial Application Holders
• CAPTO* Tool Blocks
• BMT And VDI Available
Multi-Task Machine Tooling
• Adjustable Gear Hobbing/Saw Toolholders
• Adjustable Angle Head
*CAPTO is licensed by Sandvik Coromant **KM is licensed by Kennametal, Inc ***ABS is licensed by KOMET
Command Tooling Systems • Phone 800.328.2197 • Fax 800.555.7694 • E-mail [email protected] • Web www.commandtool.com
Features & Benefits of the CircoTec RX Reamers:• Multiple cutting edges for faster speeds & feed rates• Repeatability < 4 microns • Rugged tool design increases tool life
VersaMaxRoughing:0.768 to 6.024”(19.5 to 153mm)
VersaMax Finishing:0.787 to 6.024” (20 to 153mm)
MicroMax0.040 to 1.575”
(1 to 40mm)
MegaMax5.9 to 30.7”
(150 to 805mm)
IntraMaxBoring:
1.9 to 14”(48.3-355.6mm)
OD Turning:0.35 to 9.8”
(9 to 248.9mm)
CircoTec RX Reamers are available in a diameter range from 0.468 to 3.960” (12-100mm); the ONLY solid carbide/cermet system available for reaming diameters up to 3.96” (100.6mm)