Embed Size (px)
Citation preview
Dinesh Kumar D00966500627610
Curriculum VitaeDINESH KUMAR D
Career objective:6+ years experienced results-driven and technically astute team player, seeking a challenging career in engineering industry where technical; leadership and direction are required to execute a project from the development process to a finished state, while conforming to customer requirements, company standard and industry guidelines.
OBJECTIVE:
To acquire a position that would allow me to utilize my qualification and experience. Furthermore, to take my skills to a higher level.
SUMMARY OF EXPERIENCE:
From Mar 2014 to Present
Company : Nesma & partner CompanyPosition : Senior QA/QC EngineerProject/Department : Riyadh Metro rail Project -ANMClient : ADAConsultant : RMTC
Project Detail:
Line 3 (Red Line) runs in the East-West direction along Al – Madinah Al Munawwarah and Prince Saad Bin Abdulrahman Al Awal Roads, starting at the west near Jeddah Expressway and ending at the east near the National Guard Camp of Khashm El Aan. The Metro will be mostly elevated along the western part of Al – Madinah Al Munawwarah Road, then underground in bored and mined tunnels in the central section of the line, and generally at grade along Prince Saad Ibn Abdulrahman Road. The length of the line is approximately 40.7 km (25.3 mi) and it features 20 stations, in addition to 2 transfer stations with Lines 1 and 6.
Job Involved: Responsible for all QC activities on the project. Control and supervise all the activities of QC Inspectors.
Liaise with the Client with respect to inspections, Co-ordinate with construction activities requiring
inspection, etc. Conduct surveillance audits as per the Audit Schedule in accordance with Client’s
requirements. Inspections, witnessing and hold released for excavation, base compaction, blinding form
work, rebar, concrete pours, finishing works, etc. Check /inspect all Project materials intended to be used
for the Project as per client’s requirements. Review material submittals & issue Inspection Reports &
Release Certificates. Review/evaluate concrete and asphalt design mix for the project. Implementing
the Company’s Quality Assurance procedures and system in accordance with ISO 9001 and ensuring that
personal responsible for Quality Control are aware of and maintaining the project specification and that
these are adhered to throughout the project.
Page 1
Dinesh Kumar D00966500627610
From June 2012 to March 2014
Company : Larson & Turbo LimitedPosition : Assistant Manager
Department : QA/QC Civil/Material
Project Detail:
MRTS (Mass Rapid Transport System) with integrated urban transport planning using inter modal connectivity and convenient sky-walks, which will mark the beginning of an era of seamless commuting in India.
The Hyderabad Metro Rail Network will cover a total distance of around 72 Km across three corridors:
Corridor I : Miyapur to LB Nagar Corridor II : JBS to FalaknumaCorridor III : Nagole to Shilparamam
Work Experience:
Supervise the overall activities in the material division pertaining to the particular activities. Prepared the
method of statements for various testing activities. Perform site visits to ensure that the technicians are
performing the test in accordance with the standard test method. Approval of the test reports related to
the material testing, Technical review and processing of material’s proposal from supplier in respect to
project specifications, and preparing material submittals for client approval.
Develop probable construction Quality estimates for the projects and coordinate work with other
disciplines such as Civil and Architectural etc. Reviewing of specification, fabrication and
construction design drawings. Preparation of construction work procedure (CWP) Handle
routine contract third party report. Handle responsibilities of providing guidelines to the
project team in areas of project scope, Periodical meeting with client, consultant and sub-
contractor, Responsible for implementing and expediting design review and verification by
following standard guidelines, Identifying the deviation of engineering design from the
project requirements and preparation of Technical Queries (TQ) with remedy suggestion
for client approval. Monitor all QA/QC personnel (Engineers) with regards to their job
responsibilities and obtain feed-back from them for all QA/QC activities and Conduct timely
Quality Audits in the projects in line with ISO Procedures and the Quality Management System
Procedures.
From Sep 2010 to June 2012
Company : Sarathi Builder Pvt LimitedPosition : QA/QC Engineer-TamilnaduDepartment : Quality Department
Page 2
Dinesh Kumar D00966500627610
Work Experience:
Supervise the overall activities in the material division, Preparation of material submittals, review,
approval & Preparation of Concrete Mix Design. Factual and final reporting and Senior Material
Engineering recommendations. Dealing with Clients and Consultants during the execution of projects.
Material Testing Supervision includes all the tests in Aggregates, Soil, Concrete, Steel, Cement etc.,
Witness/coordination with 3rd party for testing, Certificates verification and all incoming material
inspections. Perform the task of preparing construction plans (ITP), special provisions and analysis.
Assume the Quality checking engineer’s role on assigned projects. Site Inspection (Quality) and find
out the root causes and rectification. Perform structural inspection and an analysis document using
governing ISO codes and ISO standards and engineering formulas.
From Mar 2009 to Aug 2010
Company : Rassi ConstructionPosition : Asst QA/QC Engineer-TamilnaduDepartment : Quality Division
TRAINING & PRACTICAL COURSES:
Worked in various types of projects including Metro, tunnels, high rise building, commercial building etc with various contractors and consultants. Additionally experienced in operation of site laboratory ranging from small scaled to perform only basic tests to a fully fledged laboratory capable to perform most of the material tests applicable for construction project.
ACHIEVEMENTS:
o Earthquake Participate Central Power Research center- India
o Delivered revenue for the company through successful completion of various projects.
o Developed tactfulness in dealing with clients, growing customer database and maintaining strong
relationship with them resulting to business retention and loyalty.
o Successful in resolving quality control problems within turnaround times and meeting client requirements.
COMPUTER SKILLS:
o Proficient in MS Office Suite (Word & Excel), internet and e-mail applications
o Familiar with windows based operating systems (Win 98/XP/Vista/7)
o Auto Cad
o STADD Pro 2006
Page 3
Dinesh Kumar D00966500627610
PERSONAL DETAIL:Nationality : India
Gender : Male
Date of Birth : 9th Feb 1985
Visa Status : Residence
Sponsor : Nesma & Partner Company
Contact No. : 00966500627610,+91 8220086569
Email Address : [email protected]
Driving License : Valid India Driving License
EDUCATIONAL QUALIFICATION:
Degree : B.E Civil Engineering.
University Anna University-Chennai-Tamilnadu.
Year of Graduation : 2009 - First Class.
Reference:S.Devi PrasadQuality headL& T Heavy civil [email protected]
Ram Gopal Project Director CC27Delhi Metro ProjectL& T Heavy civil [email protected]
Place: KSADate: Dinesh Kumar D
Page 4
