94

DAFTAR PUSTAKA

Achilias, D. et al. (2007) “Chemical Recycling of Plastic Wastes Made From

Polyethylene (LDPE and HDPE) and Polypropylene (PP),” Hazardous

Materials, 149, hal. 536–542.

Aguado, J. et al. (2007) “Feedstock recycling of polyethylene in a two-step

thermo-catalytic reaction system,” Journal of Analytical and Applied

Pyrolysis, 79, hal. 415–423.

Akimkhan, A. M. (2012) “Structural and Ion-Exchange Properties of Natural

Zeolite,” Lisence in tech.

Balci, S., Dogu, T. dan Yucel, H. (1993) “Pirolysis Kinetics of Lignocellulosic

Material,” Industrial & Engineering Chemistry Research, 32, hal. 2572

– 2579.

Basu, P. (2010) “Biomass Gasification and Pyrolysis: Practical Design and

Theory,” in Academic Press. Elsevier.

Blasi, C. D. (1998) “Comparison of Semi-Global Mechanisms for Primary

Pyrolysis of Lignocellulosic Fuels,” analysis applied pyrolysis, 47, hal.

43–64.

Bogdanov, B. et al. (2009) “Synthetic Zeolites and Their Industrial and

Environmental Applications Review,” in International Science

conference.

Brandrup, J., Immergut, E. H. dan Grulke, E. A. (1999) Polymer Handbook. 4 ed.

New York: John Wiley & Sons, Ltd.

Bridgwater, A. V (2012) “Review of fast pyrolysis of biomass and product

upgrading,” Biomass and Bioenergy. Elsevier Ltd, 38, hal. 68–94.

Caglar, A. dan Aydinli, B. (2009) “Pyrolysis Isothermal Co –Pyrolysis of

Hazelnut Shell and Ultra High Molecular Weight Polyethylene : The

Effect of Temperature and Composition on the Amount of Pyrolysis

Products,” Journal of Analytical and Applied, 86, hal. 304–309.

Carniti, P. dan Beltrame, P. L. (1989) “Catalytic Degradation of Polymer: Part II–

Degradation of Polyethylene,” Polymer degradation ang stability, 26,

hal. 209–220.

Dewi, I. N. D. (2014) Karakteristik Minyak Hasil Pirolisis Batch Sampah Plastik

Polyethylene dan Polystyrene pada Berbagai Suhu. Universitas Gadjah

Mada.

Encinar, J. . dan Gonzalez, J. (2008) “Pyrolysis of Synthetic Polymers and Plastic

Wastes: Kinetic Study,” Fuel Processing Technology, 89, hal. 678–686.

Erawati, E. (2013) “Modifikasi Mekanisme Koufopanos pada Kinetika Reaksi

Pirolisis Ampas Tebu ( Bagasse ),” 7(1), hal. 14–19.

95

Ermawati, R. (2011) “Konversi Limbah Plastik sebagai Sumber Energi

Alternatif,” Jurnal Riset Industri, hal. 257–263.

Fahjri Nugraha, M. (2013) “Pembuatan Fuel dari Liquid Hasil Pirolisis Plastik

Polipropilen Melalui Proses Reforming,” Jurnal Teknik Pomits, 2(2),

hal. 2301–9271.

Georgiev, D. et al. (2009) “Synthetic Zeolites - Structure, Classification, Current

Trends In Zeolite Synthesis Review,” Technical Studies, 7, hal. 1–5.

Ishihara, A. et al. (2004) Coal and Coal Related Compouns: Structures,

Reactivity, Catalytic Reactions. Elsevier Science and Technology Book.

Jelita, R. (2015) Pengaruh Suhu dan Laju Pemanasan Terhadap Laju Proses

Pirolisis Serta Kualitas dan Kuantitas Produk Pirolisis Plastik

Kemasan Polyethylene dan Polypropylene Berlapis Alumunium.

Universitas Gadjah Mada.

Kirk, B. dan Othmer, D. (1985) “Encyclopedia of chemical technology.” The Inter

Science Encyclopedia Inc.

Komariah, L. N., Juliani, W. D. dan Dimyati, M. F. (2013) “Efek pemanasan

campuran biodiesel dan minyak solar terhadap konsumsi bahan bakar

pada boiler,” Jurnal Teknik Kimia, 19(4), hal. 53–58.

Koufopanos, C. A., Maschio, G. dan Lucchesi, A. (1989) “Kinetic Modelling of

the Pyrolysis of Biomass and Biomass Components,” The Canadian

Journal of Chemical Engineering, 67, hal. 75–84.

Kumar, S. dan Singh, R. (2011) “Recovery of Hidrocarbon Liquid From Waste

High Density Polyethylene by Thermal Pyrolysis,” Brazilian Journal of

Chemical Engineering, 28, hal. 185–195.

Lestari, D. (2010) “Kajian modifikasi dan karakterisasi zeolit alam dari berbagai

Negara,” in Prosiding seminar nasional Kimia dan Pendidikan Kimia

Universitas Muhammadiyah Yogyakarta.

Lopez, A. et al. (2010) “Pyrolysis of Municipal Plastic Wastes: Influence of Raw

Material Composition,” Waste Management, 30, hal. 620–627.

Lopez, A. et al. (2011) “Influence of time and temperature on pyrolysis of plastic

wastes in a semi-batch reactor,” Chemical Engineering Journal, 173(1),

hal. 62–71. doi: 10.1016/j.cej.2011.07.037.

Maddah, H. A. (2016) “Polypropylene as a Promising Plastic: A Review,”

American Journal of Polymer Science, 6(1), hal. 1–11.

Marcilla, A., Beltrán, M. I. dan Navarro, R. (2009) “Evolution of products during

the degradation of polyethylene in a batch reactor,” Journal of

Analytical and Applied Pyrolysis, 86(1), hal. 14–21.

Marco, I. et al. (2007) “Recycling of Automobile Shredder Residues by Means of

Pyrolysis,” Analytical and Applied Pyrolysis, 79, hal. 403–408.

96

Mirmanto, M. (2011) “Pembuatan biodiesel dari kelapa dengan metode kering,”

Dynamika Teknik Mesin Universitas Mataram, 1(1).

Mockovciakova, A. et al. (2008) “Structural characteristics of modified natural

zeolite,” Journal of Porous Materials, 15(5), hal. 559–564.

Pageh, I. M., Suyasa, W. dan Sugiartha, W. (2011) “Memprediksi Higher Heating

Value Komponen Biogenik Sampah Dari Data Analisis Ultimatnya,”

Jurnal Penelitian dan Pengembangan Sains & Humaniora, 5(3), hal.

189–208.

Panda, Achyut, K. dan Singh, R. K. (2013) “Experimental Optimization of

Process for The Thermo-Catalytic Degradation of Waste Polypropylene

to Liquid Fuel,” Advances in Energy Engineering (AEE), 1(3).

Papuga, S. V., Gvero, P. M. dan Vukić, L. M. (2016) “Temperature and time

influence on the waste plastics pyrolysis in the fixed bed reactor,”

Thermal Science, 20(2), hal. 731–741.

Pinto, F. et al. (1999) “Pyrolysis of Plastic Wastes : Effect of Plastic Waste

Composition On Product Yield,” Analytical and Applied Pyrolysis, hal.

39–55.

Purwaningrum (2016) “Upaya Mengurangi Timbulan Sampah Plastik,” Jurnal

Teknik Lingkungan, 8(2), hal. 141–147.

Sa’diyah, K. (2015) “Pengaruh Jumlah Katalis Zeolit Alam Pada Produk Proses

Pirolisis Limbah Plastik Polipropilen ( Pp ),” Jurnal Bahan Alam

Terbarukan, 4(2), hal. 9–17.

Sakata, Y. et al. (1996) “Catalytic degradation of polypropylene into liquid

hydrocarbons using silica-alumina catalyst,” Chemistry Letters, (3), hal.

245–246.

Sari, F. dan Abdurrokhman, I. (2014) “Pemanfaatan Bentonit dan Karbon Sebagai

Support Katalis NiO-MgO pada Hidrogenasi Gliserol,” 3(2), hal. 1–5.

Scheir, J. dan Kaminsky, W. (2006) Feedstock Recycling and Pyrolysis of Waste

Plastics: Converting Waste Plastics into Diesel and Other Fuels.

Chichester: John Wiley & Sons, Ltd.

Shafizadeh, F. dan Chin, P. P. S. (1977) “Thermal Deterioration of Wood,” ACS

Symposium Series, 43, hal. 57–81.

Subagyo (1993) “Zeolit 1 Struktur dan Sifat-sifatnya,” Warta Insinyur Kimia

Jakarta, 2, hal. 43.

Subroto (2017) “Kinerja Tungku Gasifikasi Downdraft Continue Bahan,” Jurnal

Ilmiah Teknik Mesin, 18(1), hal. 24–33.

Surest, A. H., Kasih, J. a. F. dan Wisanti, A. (2008) “Pengaruh Suhu, Konsentrasi

Zat Akhivator dan Waktu Aktivasi terhadap Daya Serap Karbon Aktif

dari Tempurung Kemiri,” Jurnal Teknik Kimia, 15(2), hal. 17–22.

Syamsiro, M. (2014) “Fuel Oil Production from Municipal Plastic Wastes in

97

Sequential Pyrolysis and Catalytic Reforming Reactors,” Energy

Procedia 47, 47, hal. 180–188.

Thurner, F. dan Mann, U. (1981) “Kinetic investigation of wood pyrolysis,”

Industrial & Engineering Chemistry Process Design and Development,

20(3), hal. 482–488. doi: 10.1021/i200014a015.

Tjokrowisastro, E. . (1990) Teknik Pembakaran Dasar dan Bahan Bakar. Diktat

ITS-Surabaya.

Uemichi, Y. et al. (1983) “Gas Chromatographic Determination of the Products of

Degradation of Polyethylene over a Silica- Alumina Catalyst,” Journal

of Chromatogr, 259, hal. 69–77.

Undri, A., Rosi, L. dan Frediani, M. (2014) “Fuel From Microwave Assisted

Pyrolysis Of Waste Multilayer Packaging Beverage,” Journal Of Fuel,

133, hal. 7–16.

Vargas, J. M. dan Perlmutter, D. D. (1986) “Interpretation of Coal Kinetics,”

Industrial & Engineering Chemistry Process Design and Development,

25, hal. 49–54.

Wahyudi, E. (2016) “Pengolahan Sampah Plastik Polipropilena ( PP ) Menjadi

Bahan Bakar Minyak dengan Metode Perengkahan Katalitik

Menggunakan Katalis Sintetis Processing of Polypropylene ( PP ),”

Jurnal Rekayasa Kimia dan Lingkungan, 11(1), hal. 17–23.

Walendziewski, J. (2001) “Thermal and Catalytic Conversion of Waste

Polyolefins,” Catalysis today, hal. 323–330.

Widyandra, Y. (2011) “Pirolisis Cangkang Sawit Menjadi Asap Cair Dengan

Katalis Bentonit : Variabel Waktu Pirolisis dan Rasio Katalis/Cangkang

Sawit,” in Prosiding SNTK TOPI, hal. 21–22.

Xingzhong, Y. (2006) “Converting Waste Plastics into Liquid Fuel by Pyrolysis:

Developments in China,” in Feedstock Recycling and Pyrolysis of

Waste Plastics: Converting Waste Plastics into Diesel and Other Fuels.

Chichester: John Wiley & Sons, Ltd, hal. 729–750.

Yorgun, S., Senzos, S. dan Kochar, O. (2001) “Characterization Of The Pyrolysis

Oil Produced In The Slow Pyrolysis Of Sunfower-Extracted Bagasse,”

Biomass and Bioenergy, 20, hal. 141–149.

Yuniarti (2016) Tinjauan Kinetika Reaksi Pirolisis Cangkang Biji Ketapang

Untuk Menghasilkan Bahan Bakar Briket Arang. Universitas Gadjah

Mada.

Zaiter, J. (2014) “A Process Study On The Pyrolysis of Waste Polyethylene,”

Fuel, 133, hal. 276–278.

Zhu, X. et al. (2008) “Catalytic cracking of C4 alkenes to propene and ethene:

influences of zeolites pore structures and Si/Al2 ratios,” Applied

Catalysis A, 288, hal. 134–142.