Embed Size (px)
Citation preview
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of Act
Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Contact details
A
Agr
icul
ture
April
200
9
1 MS 1230:2010 FAMA
2 MS 894:1984
3 MS 1124:1996
4 MS 1306:2005
5 MS 1252:2009
6 MS 951:2003
7 MS 1324:1993
8 MS 892:2004
9 MS 1393:1996
10 MS 1146:1989
11 MS 1361:1994
12 MS 1323:2008
13 MS 1362:1994 Specification for Fresh Spinach
14 MS 956:2003
15 MS 893:2010
16 MS 1127:2002
17 MS 1040:1986 Specification for Fresh Papaya18 MS 1145:2003
19 MS 1149:1989 Specification for Fresh Guava20 MS 232:1974
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcement Agenc
y
Federal Agricultural Marketing Authority Act 1965 (Revised 1974) [Act 141]
Federal Agricultural Marketing Authority (Grading, Packaging And Labelling Of Agricultural Produce) Regulations 2008
Fresh Lady’s Finger (Okra)-Specification (1st revision)
Pn. Norhayati Hj MauludEmel:[email protected] Tel: 03-61264000 ext 4127Faks: 03-61374766
Fresh Chillies-Specification (1st revision)
Replaced by MS 894:2005-Fresh Chillies-Specification (1st revision)
Specification for Fresh Sweet Pepper (Bell Pepper) (1st revision)
Fresh Ginger-Specification (1st revision)
Fresh French Beans-Specification (1st revision)
Spesifikasi bagi Kacang Panjang (2nd revision)
Specification for Fresh Kale (kailan)
Spesifikasi bagi Kobis Bulat (2nd revision)
Specification for Fresh Chinese Cabbage (Head Type)
Specification for Fresh Bitter Gourd
Specification for Fresh Head Lettuce
Fresh Mustards-Specification (1st revision)
Spesifikasi bagi Timun (2nd revision)
Spesifikasi bagi Tomato (2nd revision)
Specification for Fresh Carambola (2nd revision)
Specification for Fresh Eksotika Papaya (1st revision)
Specification for Malaysian Mandarins for Fresh-Fruit Consumption
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of Act
Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcement Agenc
y
A
Agr
icul
ture
April
200
9
21 MS 885:1984
FAMA
A
Agric
ultu
re
April
200
9
22 MS 1128:1989 FAMA
23 MS 1055:1986 Specification for Fresh Jackfruit FAMA
24 MS 459:1976 Specification for Fresh Bananas FAMA
25 MS 1075:1987 FAMA
26 MS 1028:2005 FAMA
27 MS 1325:1993 FAMA
28 MS 1354:1994 FAMA
29 MS 1280:1992 FAMA
30 MS 1233:1991 FAMA
31 MS 1355:1994 FAMA
32 MS 1281:1992 FAMA
33 MS 1353:1994 FAMA
Food Regulations 1985
1 Ja
nuar
i 201
1
34 MS 1529:2001 DOA
MS 1529:2001 MOH
Federal Agricultural Marketing Authority Act 1965 (Revised 1974) [Act 141]
Federal Agricultural Marketing Authority (Grading, Packaging And Labelling Of Agricultural Produce) Regulations 2008
Pn. Norhayati Hj MauludEmel:[email protected] Tel: 03-61264000 ext 4127Faks: 03-61374766
Specification for the Grading of Mangoes for Fresh-Fruit Consumption
Federal Agricultural Marketing Authority Act 1965 (Revised 1974) [Act 141]
Federal Agricultural Marketing Authority (Grading, Packaging And Labelling Of Agricultural Produce) Regulations 2008
Specification for Quick Frozen Mangosteen
Pn. Norhayati Hj MauludEmel:[email protected] Tel: 03-61264000 ext 4127Faks: 03-61374766
Export Specification for Fresh ‘Mas’ Bananas
Fresh Watermelon - Specification (1st revision)
Specification for Fresh Muskmelon (Tembikai Wangi)
Specification for Fresh Cut Chrysanthemum (Multi-Floral)
Specification for Fresh Orchid Cut Flowers (Spray Type)
Specification for Fresh Cut Roses (Unifloral Type)
Specification for Fresh Cut Roses (Multi-Floral)
Specification for Fresh Cut Carnations (Unifloral)
Specification for Fresh Cut Carnations (Multi-Floral)
Food Act 1983 [Act 281]
The Production, Processing, Labelling and Marketing of Plant-Based Organically Produced Foods
Pn. Norma OsmanEmel:[email protected]: 03-88703447Faks: 03-88887639
*Refer no. 34
The Production, Processing, Labelling and Marketing of Plant-Based Organically Produced Foods
Pn. Shamsinar Abdul TalibEmel:[email protected]: 03-88850787Faks: 03-88893815
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of Act
Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcement Agenc
y
A
Agric
ultu
re
35 MS 157:2005 MPOB
Malaysian Palm Oil Board Act 1998 [Act 582]
Peraturan-Peraturan Lembaga Minyak Sawit Malaysia (Perlesenan) 2005
Syarat-Syarat Bagi Pemegang Lesen Dalam Kategori Pengeluar Biji Benih Kelapa Sawit (NS)
Oil Palm Seeds for Commercial Planting - Specification
Pn. Zalena Abu HasanEmel:[email protected]: 03-78002977Faks: 03-78034014
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
B
36 MS ISO 8124: Part 1: 2001
KPDNKK
37 MS ISO 8124: Part 1: 2011
38 MS ISO 8124: Part 2:2008
39 MS ISO 8124: Part 3: 2002 Safety of Toys - Part 3: Migration of Certain Elements
40 MS 1774: Part 4: 1998
41 MS 1774: Part 5: 1998
42 MS 1774: Part 6: 1998
43 MS 1848:2005 ALUMINIUM AND ALUMINIUM ALLOYS - FOILS
MITI
44 MS 2040:2007
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Chemicals and
Materials
Consumer Protection Act 1999 [Act 599]
Consumer Protection (Safety Standards For Toys) (Amendment) Regulations 2010
1 Ogos 2010
Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties
Pn Thiagaletchumi V. ManiamEmel: [email protected]: 03-8882 5862Faks: 03-88826960
Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties
SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (FIRST REVISION) (ISO 8124-1:2009, IDT)
1 Ogos 2010
Safety of Toys - Part 4: Experimental Sets for Chemistry and Related Activities
Safety of Toys - Part 5: Chemical Toys (Sets) Other Than Experimental Sets
Safety of Toys - Part 6: Graphical Symbol for Age Warning Labelling
Customs Act 1967 [Act 235]
Customs (Prohibition of Imports) (No 3) Order 2011Incorporating [P.U.(A) 86/2008]
En. Farid Mohd SahatEmel: [email protected]: 03-62034710Faks:03-62033137
ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS AND COILED SHEETS - SPECIFICATION
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
D
45 MS 544: Part1: 2001
JKT, KPKT
46 MS 544: Part 2: 2001
47 MS 544: Part 3: 2001
48
49
50
51
52 MS 544: Part 5: 2001
53 MS 544: Part 6: 2001
54 MS 544: Part 7: 2001
55
56
JKT, KPKT
57
58
59
60
Arahan Tetap Bomba 61 MS 76: 1972 BOMBA
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
Building, Construction and Civil
Engineering
Street, Drainage and Building Act 1974 [Act 133]
Uniform Building By-Laws 1984 (G.N. 5178/84)
Code of Practice for Structural Use of Timber: Part 1: General (1st revision)
Code of Practice for Structural Use of Timber: Part 2: Permissible Stress Design of Solid Timber (1st revision)
Code of Practice for Structural Use of Timber: Part 3: Permissible Stress Design of Glued Laminated Timber
MS 544: Part 4: Section 1: 2001
Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 1: Structural Plywood
MS 544: Part 4: Section 2: 2001
Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 2: Marine Plywood
MS 544: Part 4: Section 3: 2001
Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 3: Cement Bonded Particle Board (CBP)
MS 544: Part 4: Section 4: 2001
Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 4: Oriented Strand Board (OSB)
Code of Practice for Structural Use of Timber: Part 5: Timber Joints
Code of Practice for Structural Use of Timber: Part 6: Workmanship, Inspection and Maintenance (1st revision)
Code of Practice for Structural Use of Timber: Part 7: Testing (1st revision)
MS 544: Part 9: Section 1: 2001
Code of Practice for Structural Use of Timber: Part 9: Fire Resistance of Timber Structures: Section 1: Method of Calculating Fire Resistance of Timber Members
MS 544: Part 10: 2003
Code of Practice for Structural Use of Timber: Part 10: Preservative Treatment of Structural Timber
MS 544: Part 11: Section 1: 2001
Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 1: Domestic Floor Joists
MS 544: Part 11: Section 2: 2001
Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 2: Ceiling Joists
MS 544: Part 11: Section 3: 2001
Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 3: Ceiling Binders
MS 544: Part 12: 2006
Code of Practice for Structural Use of Timber: Part 12: Laminated Veneer Lumber for Structural Application
Street, Drainage and Building Act 1974 [Act 133]
Fire Services Act 1988
Specification for bricks and blocks of fired brick-earth, clay or shale: Part 2: Metric Units
Tajuk ada Part 2 kerana adopted dari Part 2 standard luar
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
D
62 MS 1184:2002
Building, Construction and Civil
Engineering
Street, Drainage and Building Act 1974[Act 133]
Uniform Building By-Laws 1984 (Amendment 1991) Inserting new By-Law 34(A)By-Law 34(A)(2)
Code of practice for access of disabled people to public buildings
Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
D
63 MS 1331:2003
###
64 MS 888: 2011 White Portland cement
CIDB
65 MS 795:2002
66
67
68
69
70
71
72
73
74
Garis Panduan dan Piawaian Perancangan-Kemudahan Golongan Orang Kurang Upaya (Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia)
Code of Practice for Access of Disabled Persons Outside Building
Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia
Building, Construction and Civil
Engineering
Akta Lembaga Pembangunan Industri Pembinaan Malaysia (Pindaan)2011
Specification for WC Flushing Cisterns and Flush pipes (1st revision)
MS 1064 : PART 10 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 10 : COORDINATING SIZES AND PREFERRED SIZES FOR REINFORCED CONCRETE COMPONENTS (FIRST REVISION)
MS 1064 : PART 3 : 2003 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 3 : COORDINATING SIZES AND PREFERRED SIZES FOR STAIRS AND STAIR OPENINGS (FIRST REVISION)
MS 1064 : PART 4 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 4 : COORDINATING SIZES AND PREFERRED SIZES FOR DOORSETS (FIRST REVISION)
MS 1064 : PART 5 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 5 : COORDINATING SIZES AND PREFERRED SIZES FOR WINDOWSETS (FIRST REVISION)
MS 1064 : PART 6 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 6 : COORDINATING SIZES AND PREFERRED SIZES FOR RIGID FLAT SHEETS (FIRST REVISION)
MS 1064 : PART 7 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS: PART 7: COORDINATING SIZES AND PREFERRED SIZES FOR TILES
MS 1064 : PART 8 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS: PART 8 : COORDINATING SIZES AND PREFERRED SIZES FOR MASONRY BRICKS AND BLOCKS
MS 1064 : PART 9 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 9: COORDINATING SIZES AND PREFERRED SIZES FOR CABINETS
MS 1017 : PART 1 : 1986
SPECIFICATION FOR ALUMINIUM FRAMED SLIDING GLASS DOORS : PART 1 : SINGLE GLAZED DOORS
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
D
###75
CIDB
76
77
78
79
Building, Construction and Civil
Engineering
Akta Lembaga Pembangunan Industri Pembinaan Malaysia (Pindaan)2011
MS 1020:2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION (FIRST REVISION)
MS 1314 : PART 1 : 2004
PRECAST CONCRETE PILES : PART 1 : GENERAL REQUIREMENTS AND SPECIFICATIONS (FIRST REVISION)
MS 1314 : PART 2 : 2004
PRECAST CONCRETE PILES : PART 2 : METHOD FOR DETERMINATION OF BENDING STRENGTH OF PRECAST CONCRETE PILES (BEND TEST) (FIRST REVISION)
MS 1314 : PART 3 : 2004
PRECAST CONCRETE PILES : PART 3 : PRECAST REINFORCED CONCRETE SQUARE PILES (RC PILES) CLASS M, CLASS J AND CLASS S
MS 1314 : PART 4 : 2004
PRECAST CONCRETE PILES : PART 4 : PRECAST PRETENSIONED SPUN CONCRETE PILES (SPUN PILES) CLASS A, CLASS B AND CLASS C
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
D
###
80
CIDB
81
82 MS 795-1:2011
83 MS 795-2:2011
84 MS 795-3:2011
85 SPECIFICATION FOR SAWN-TIMBER FOUNDATION PILES
86
87 MS 1037:1986 Sulphate-resisting Portland cement
MS EN 197-1:2007
90MS ISO 13006:2003
91MS 147:2001
92MS 1522:2011
Building, Construction and Civil
Engineering
Akta Lembaga Pembangunan Industri Pembinaan Malaysia (Pindaan)2011
MS 1314 : PART 5 : 2004
PRECAST CONCRETE PILES : PART 5 : PRECAST PRESTRESSED CONCRETE SQUARE PILES - CLASS PC-X, CLASS PC-Y, SMALL PILES CLASS PCS-1, AND CLASS PCS-2
MS 1314 : PART 6 : 2004
PRECAST CONCRETE PILES : PART 6: SMALL REINFORCED CONCRETE SQUARE PILES - SMALL PILES CLASS RCS-1 AND CLASS RCS-2
WC FLUSHING CISTERNS - PART 1 : SPECIFICATION (SECOND REVISION)
WC FLUSHING CICTERNS - PART 2:INLET VALVES (SECOND REVISION)
WC FLUSHING CICTERNS - PART 3: FLUSHING DEVICE (SECOND REVISION)
MS 822 : 1983 (CONFIRMED:2004)
MS 1061 : PART 2 : 1999
VITRIFIED CLAY PIPES FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS: PART 2: QUALITY CONTROL AND SAMPLING
88
89
MS EN 197-1:2007,
MS EN 197-2:2007
CEMENT- PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
CEMENT - PART 2: CONFORMITY EVALUATION
MS 1227, MS 1389, MS 1520 & MS 1388 telah
digabung menjadi MS EN 197 Part 1 & 2
*Refer no. 88
CEMENT- PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
Ceramic Tiles - Definitions, Classification, Characteristic and Marking
Specification for Quality of Vitreous China Sanitary Appliances (1st revision)
Specification for Vitreous China Water Closet Pans (1st revision)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
Regulator
Contact details
Pn.Aminah Abd. RahmanEmel:[email protected]: 03-20874501Faks: 03-20953717
Pn.Aminah Abd. RahmanEmel:[email protected]: 03-20874501Faks: 03-20953717
En. Nordin PauziEmel:[email protected]: 03-83185444/ 019-2217006Faks: 03-83195244
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
Regulator
Contact details
Pn. Aminah Abd. RahmanEmel:[email protected]: 03-20874501Faks: 03-20953717
En. Fadzli ZubiEmel:[email protected]: 03-26989211Faks: 03-26933964
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
Regulator
Contact details
Pn. Aminah Abd. RahmanEmel:[email protected]: 03-20874501Faks: 03-20953717
En. Fadzli ZubiEmel:[email protected]: 03-26989211Faks: 03-26933964
Tuan Haji Razuki Hj. IbrahimEmel: [email protected]
Tel: 03-26170348Fax 03-40451808
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
Regulator
Contact details
Tuan Haji Razuki Hj. IbrahimEmel: [email protected]
Tel: 03-26170348Fax 03-40451808
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
Regulator
Contact details
Tuan Haji Razuki Hj. IbrahimEmel: [email protected]
Tel: 03-26170348Fax 03-40451808
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
E
93 MS 1578:2003 68
ST
94 MS 589-1:2011
95 MS 1577:2003
96
97 MS 1144:1998 General requirements for electric accessories (1st revision)
98
99
100
101
102
103
104
ST
105
106
107 MS 589-2:2011
108 MS 1579:2003
109
110
111
112 MS 770:1982 Specification for ceiling roses
113 Glow-starters for fluorescent lamps
114
115
116
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Generation, Transmissio
n and Distribution
of Energy
Electricity Supply Act 1990 [Act 447]
Approval of Electrical Equipment
Electricity Regulations 1994 - P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A)
192/98, P.U.(A) 397/99, P.U.(A) 431/2003]
ST DirectiveInformation
Booklet 2009 Edition
Specification for flat non-rewirable two-pole plugs, 2.5A. 250 V with cord for connection of Class II – Equipment for household and similar purposes
Ir. Amir HassanEmel:[email protected]: 03-88708605Faks: 03-88888652
Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 1: Specification for rewirable and non-rewirable 13A plugs (1st revision)
Specification for 15A plugs and socket-outlets for domestic and similar purposes
MS 589-3:1998 Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 3: Specification for adaptors
MS IEC 60998-1:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 1: General requirements
MS IEC 60998-2-1:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 2-1: Particular requirements for connecting devices as separate entities with screw - type clamping
MS IEC 60998-2-3:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
MS IEC 60998-2-4:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 2-4: Particular requirements for twist-on connecting devices
MS IEC 60998-2-5:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices
MS IEC 60669-1:2004
Switches for household and similar fixed electrical installations: Part 1: General requirements
MS IEC 60669-2-1:2004
Switches for household and similar fixed electrical installations: Part 2-1: Particular requirements – Electronic switches
Ir. Amir HassanEmel:[email protected]: 03-88708605Faks: 03-88888652
MS IEC 60669-2-2:2004
Switches for household and similar fixed electrical installations: Part 2-2: Particular requirements – Remote control switches (RCS)
MS IEC 60669-2-3:2004
Switches for household and similar fixed electrical installations: Part 2-3: Particular requirements – Time delay switches (TDS)
Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 2: Specification for 13A switched and unswitched socket-outlet (1st revision)
Specification for portable 2 pin socket-outlets for class II equipment for household and similar purposes
MS IEC 61558-1:2005
Safety of power transformers, power supply units and similar: Part 1: General requirements and tests
MS IEC 61558-2-5:2005
Safety of power transformers, power supply units and similar: Part 2-5: Particular requirements for shaver transfomers and shaver supply units
MS IEC 61558-2-6:2005
Safety of power transformers, power supply units and similar: Part 2-6: Particular requirements for safety isolating transformers for general use
MS IEC 60155:1996
Electricity Supply Act 1990 [Act 447]
Approval of Electrical Equipment
Electricity Regulations 1994 - P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A)
192/98, P.U.(A) 397/99, P.U.(A) 431/2003]
ST DirectiveInformation
Booklet 2009 Edition
MS IEC 61008-1: 2007
Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCBs): Part 1: General rules (1st revision)
MS IEC 61008-2-1:2003
Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCB’s): Part 2-1: Applicability of the general rules to RCCB’s functionally independent of line voltage
MS IEC 61008-2-2:2003
Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCB’s): Part 2-2: Applicability of the general rules to RCCB’s functionally dependent on line voltage
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
E
117
118
119
120
121
122 Low-voltage fuses: Part 1: General requirements
123
124
125
ST
126
127
128 MS 140:1987 Specification for insulated flexible cords and cables (1st revision)
129 MS 136:1995
130 MS 1936:2007 Electrical installations of buildings - Guide to MS IEC 60364
131 MS 1979:2007 Electrical installations of buildings - Code of Practice
132
SKMM
133 MS 406:1996
134 IEC standard voltages
135
MS 1578:2003
MS 589-1:2011
Generation, Transmissio
n and Distribution
of Energy
MS IEC 61009-1:2003
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 1: General rules
Replaced by MS IEC 61009: Part 1: 2005
MS IEC 61009-2-1:2003
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 2-1: Applicability of the general rules to RCBO’s functionally independent of line voltage
MS IEC 61009-2-2:2003
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 2-2: Applicability of the general rules to RCBOs functionally dependent of line voltage
MS IEC 60898-1:2007
Electrical accessories - Circuit-breaker for overcurrent protection for household and similar installation: Part 1: Circuit-breaker for a.c operation
Replaced by MS IEC 60898: Part 1: 2007
MS IEC 60898-2: 2007
Circuit-breakers for overcurrent protection for household ans similar installation: Part 2: Circuit-breaker for a.c and d.s. operation
Replaced by MS IEC 60898: Part 2: 2007
MS IEC 60269-1:2011
Replaced by MS IEC 60269: Part 1: 2005
MS IEC 60269-2-1:2011
Low-voltage fuses: Part 2-1: Supplementary requirements for fuses for use by authorized person (Fuses mainly for industrial application) – Section I to IV: Examples of types of standardised fuses
MS 1586-3:2003
Low-voltage fuses: Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
Electricity Supply Act 1990 [Act 447]
Approval of Electrical EquipmentElectricity Regulations 1994 - P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]
ST DirectiveInformation Booklet 2009 Edition
MS IEC 60269-3-1:2006
Low-volatge fuses: Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) Section I to IV
Replaced by MS IEC 60269: Part 3-1: 2006
Ir. Amir HassanEmel:[email protected]: 03-88708605Faks: 03-88888652
MS IEC 60947-1:2010
Low-voltage switchgear and controlgear: Part 1: General rules Replaced by MS IEC 60947: Part 1: 2004
MS IEC 60947-3:2000
Low-voltage switchgear and controgear: Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units
Replaced by MS IEC 60947: Part 3: 2007
Specification for PVC insulated cables (non armoured) for electric power and lighting (2nd revision)
Electricity Supply (Electrical Product And Appliance Safety) Regulations 2008
ST(IP) PE/11/12/1( )
Replaced by MS 1936:2007
Pn. Fairus Abd. ManafEmel:[email protected]: 03-88708607Faks: 03-88888652
Communications And Multimedia Act 1998 [Act 588]
Customs (Prohibition of Imports) Order 2008 Incorporating latest amendment [P.U.(A) 34/2010]
MS CISPR 22:2009
Information Technology Equipment - Radio disturbance characteristics - Limits and methods of measurement
En. Mohamad Nazir OsmanEmel:[email protected]: 03-86888247Faks: 03-86881005
Specification for voltages and frequency for alternating current transmission and distribution systems
MS IEC 60038:2006
MS IEC 61643-1:2006
Surge protective devices connected to low-voltage power distribution systems -Part 1: Performance requirements and testing methods
*Refer no. 93
Specification for flat non-rewirable two-pole plugs, 2.5A. 250 V with cord for connection of Class II – Equipment for household and similar purposes
*Refer no. 94
Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 1: Specification for rewirable and non-rewirable 13A plugs (1st revision)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
E
MS 1577:2003SKMM
MS 140:1987 Specification for insulated flexible cords and cables (1st revision)
136
ST
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
Generation, Transmissio
n and Distribution
of Energy
Electricity Supply Act 1990 [Act 447]
Electricity Supply (Electrical Product And
Appliance Safety) Regulations 2008
ST(lP/KKE) 16/1 (3)
ST(lP) PE/11/2/1( )
*Refer no. 95
Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 1: Specification for rewirable and non-rewirable 13A plugs (1st revision)
En. Mohamad Nazir OsmanEmel:[email protected]: 03-86888247Faks: 03-86881005
*Refer no. 128
MS IEC 60364-1:2007
Low-Voltage Electrical Installations: Part 1: Fundamental Principles, Assessment of General Characteristics, Definitions (2nd revision)
Pn. Fairus Abd. ManafEmel:[email protected]: 03-88708607Faks: 03-88888652
MS IEC 60364-4-41:2007
Low-Voltage Electrical Installations: Part 4-41: Protection for Safety - Protection Against Electrical Shock
MS IEC 60364-7:Section 703:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 703: Locations Containing Sauna Heaters
Confirmed: 2002
MS IEC 60364-7-712:2007
Electrical Installations of Buildings: Part 7-712: Requirements for Special Installations or Locations - Solar Photovoltaic (PV) Power Supply Systems
MS IEC 60364-7-708:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 708: Electrical Installations in Caravan Parks and Caravans
MS IEC 60364-5-55:2003
Electrical Installations of Buildings: Part 5: Selection and Erection of Electrical Equipment: Chapter 55: Other Equipment: Section 551: Low Voltage Generating Sets
MS IEC 60364-7-705:1996
Electrical installations of Buildings: Part 7: Requirements for Special Installations or Locations-Section 705: Electrical Installations of Agricultural and Horticultural Premises
Confirmed: 2002
MS IEC 60364-7-706:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 706: Restrictive Conducting Locations
ST(lP/KKE) 16/1 (3)
ST(lP) PE/11/2/1( )
MS IEC 60364-7-702:2003
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 702: Swimming Pools and Other Basins
Pn. Fairus Abd. Manaf
Emel:[email protected]
Tel: 03-88708607Faks: 03-88888652
ST(lP/KKE) 16/1 (3)
ST(lP) PE/11/2/1( )
*Refer no. 141 MS IEC 60364-
5-55:2003Electrical Installations of Buildings: Part 5-55: Selection and Erection of Electrical Equipment-Other Equipment
MS IEC 60364-5-52:2003
Electrical Installations of Buildings: Part 5-52: Selection and Erection of Electrical Equipment-Wiring Systems
MS IEC 60364-4-43:2003
Electrical Installations of Buildings: Part 4-43: Protection for Safety - Protection Against Overcurrent
ST(lP/KKE) 16/1 (3)
ST(lP) PE/11/2/1( )
MS IEC 60364-7-709:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 709: Marinas and Pleasure Craft
Confirmed: 2002
MS IEC 60364-7-707:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 707: Earthing Requirements for the Installations of Data Processing Equipment
Confirmed: 2002
MS IEC 60364-7-704:2003
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 704: Construction and Demolition Site Installations
ST(lP/KKE) 16/1 (3)
MS IEC 60364-5-53:2003
Electrical Installations of Buildings: Part 5-53: Selection and Erection of Electrical Equipment-Isolation, Switching and Control
MS IEC 60364-4-42:2003
Electrical Installations of Buildings: Part 4-42: Protection for Safety-Protection Against Thermal Effects
MS IEC 60364-6-61:2003
Electrical Installations of Buildings: Part 6-61: Verification-Initial Verification
ST(lP/KKE) 16/1 (3)
ST(lP) PE/11/2/1( )
MS IEC 60364-5-54:2004
Electrical Installations of Buildings: Part 5-54: Selection and Erection of Electrical Equipment-Earthing Arrangements, Protective Conductors and Protective Bonding Conductors
MS IEC 60364-4-44:2007
Electrical Installations of Buildings: Part 4-44: Protection for Safety-Protection Against Voltage Disturbances and Electromagnetic Disturbances
MS IEC 60364-5-51:2007
Electrical Installation of Buildings: Part 5-51: Selection and Erection of Electrical Equipment-Common Rules (2nd revision)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
E
156
ST
1-Sep-11
157
158
159
160
161 Luminaires: Part 1: General requirements and test BOMBA
Generation, Transmissio
n and Distribution
of Energy
Electricity Supply Act 1990 [Act 447]
Approval of Electrical Equipment
Electricity Regulations 1994 - P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A)
192/98, P.U.(A) 397/99, P.U.(A) 431/2003]
ST DirectiveInformation Booklet 2009 Edition
MS IEC 60320-2-2:2003
Appliances couplers for household and similar general purposes: Part 2-2: Interconnection couplers for household and similar equipment
Pn. Fairus Abd. Manaf
Emel:[email protected]
Tel: 03-88708607Faks: 03-88888652
Electricity Supply (Electrical Product And
Appliance Safety) Regulations 2008
ST/IP/PK/JKKE/Pk 03/2011
MS IEC 62305-1:2007
Protection Against Lightining - Part 1:General Principles (First Revision)
Pekeliling 03/2011 (New) from ST
MS IEC 62305-2:2008
Protection Against Lightining - Part 2:Risk Management (First Revision)
MS IEC 62305-3:2009
Protection Against Lightining -Part 3:Physical Damage to Structures and Life Hazard (First Revision)
MS IEC 62305-4:2010
Protection Against Lightining - Part 4:Electrical and Electronic Systems within Structures (First Revision)
Street, Drainage and Building Act 1974 [Act 133]
Fire Services Act 1988
Uniform Building By-Laws 1984 (G.N. 5178/84)
Arahan Tetap Bomba
MS IEC 60598-1:2006
En. Nordin PauziEmel:[email protected]: 03-83185444/ 019-2217006Faks: 03-83195244
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
F
162 MS 1462:1999 Steel Frame scaffoldingsCIDB
163 MS ISO 4344:2004 Steel wire ropes for lifts - Minimum requirements
164 MS 1968:2007
MITI
165 MS 1919:2006
166 MS ISO 2408:2004
167 MS 971:1985 KPDNKK
168 MS 2021-1:2006
DOSH169 MS 1803:2008 CRANES - SAFETY - TOWER CRANES
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Mechanical Engineering
Akta Lembaga Pembangunan Industri Pembinaan Malaysia
(Pindaan)2011
Tuan Haji Razuki Hj. IbrahimEmel: [email protected]: 03-26170348Fax 03-40451808
Customs Act 1967 [Act 235] Customs
(Prohibition of Imports) Order 2008 Incorporating latest amendment [P.U.(A) 34/2010]
Buku Tatacara Mengimport Produk Bahan Binaan CIDB (Website CIDB)
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions En. Farid Mohd Sahat
Emel: [email protected]: 03-62034710Faks:03-62033137Customs Act 1967 [Act
235]Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Customs Act 1967 [Act 235]
Steel wire ropes for general purposes - Minimum requirements
Trade Descriptions Act 1972 [Act 87]
Trade Description (Making of Non-Pressure Kerosene Stove) Order 1991
Specification for Non-pressure kerosene stoves for domestic use
Pn Thiagaletchumi V. ManiamEmel: [email protected]: 03-8882 5862Faks: 03-88826960
FACTORIES AND MACHINERY ACT 1967 (REVISED - 1974) Act
139
Safety rules for the construction and installation - Part 1: Electric lift)
Mohd Fazli B. Masri,Email :[email protected] : 012-7964645/ 03-8886 5686Fax : 03-8889 2352
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
H
170
6
171MS 912:2008
172
MS ISO 3183 MITI
173
MS 775:2005 JPJ
174MS 830 :2003
BOMBA175
MS 930:2010
MS 930:1986 DOSH
MS 830 :2003
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Petroleum and Gas
Environmental Quality Act 1974 [Act 127]
Environmental Quality (Control Of Lead Concentration In Motor Gasoline) Regulations 1985 - P.U.(A) 296/85;
MS 118-2:2005, AMD. 1:2009
Specification for Motor vehicle gasoline : Part 2 : Unleaded gasoline JAS (Bhgn
Udara)
Pn. Nor Rashidah Mohd Ghazali
Emel:[email protected]: 03-88712326
Faks: 03-88884151 Method of test for lead in gasoline (iodine monochloride method)
Customs Act 1967 [Act 235]
Customs (Prohibition of Imports) Order 2008 Incorporating latest amendment [P.U.(A) 34/2010]
Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (1st revision)
En. Farid Mohd SahatEmel: [email protected]: 03-62034710Faks:03-62033137
Road Transport Act 1987 [Act 333]
Motor Vehicles (Construction, equipment and use) (use of Liquefied Petroleum Gas Fuel System in Motor Vehicles) Rules 1982
Specification for LPG fuel system in internal combustion engines
En. Sharulnizam SaripEmel:[email protected]: 03-88866702Faks: 03-88905950
Street, Drainage and Building Act 1974 [Act 133]
Fire Services Act 1988
Uniform Building By-Laws 1984 (G.N. 5178/84)
Arahan Tetap Bomba
Code of Practice for The Storage, Handling and Transpotation of LPG (1st revision)
En. Nordin PauziEmel:[email protected]: 03-83185444/ 019-2217006Faks: 03-83195244
Code of Practice for the Installation of Fuel Gas Piping System and Appliances (1st revision)
*Refer no. 175
Code of Practice for the Installation of Fuel Gas Piping System and Appliances (1st revision)
*Refer no. 174
Code of Practice for The Storage, Handling and Transpotation of LPG (1st revision)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
L
176 MS 1-1:2011 Specifications for protective helmets for vehicle users
JPJ
177 MS 1175:2003 Specification for Seat Belts for Motor Vehicles (First Revision)
178 MS 75:2002 Specification for anchorages for seat belts
179
180
181 MS 1394:2008
182 MS 149:2008 New Pneumatic Passenger Car Tyres- Specification
Julai 2010
183
184
185
186
187
188
189
Jan-12 190 MS 2413-1:2011
191 MS 2413-2:2011
192 MS 2413-3:2011
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Road Vehicles
Road Transport Act 1987 [Act 333]
Motorcycles (Safety Helmets) Rules , 1973 Renumbered MS 1:1996
En. Sharulnizam SaripEmel:[email protected]
ov.myTel: 03-88866702
Faks: 03-88905950
Motor Vehicles (Safety Seat-Belts) Rules 1978. P.U.(A) 378/1978
(Renumbered MS 74) Replaced by MS 1175:2003
Motor Vehicles (Safety Seat-Belts) Rules 1978. P.U.(A) 378/1978
(Renumbered MS 75) Replaced by MS 75:2002
Motor Vehicles (Construction and Use) Rules 1959
MS ISO 303:2004
Installation of Lighting and Signalling Devices for Motor Vehicles and Their Trailers
Motor Vehicles (Construction and Use)
Rules 1959
MS 224:2005 AMD. 1:2010
Retreaded Pneumatic Rubber Tyres for Passengers Cars and Commercial Vehicles- Specification (2nd revision)
New Pneumatic Tyres for Highway Vehicles Other Than Passenger Cars- Specifications (1st revision)
MS 1742-1:2004
Vehicle security systems: Part 1: Guidelines to the application of security systems to vehicles
MS 1742-2:Section 1:2004
Vehicle security systems: Part 2: Locking systems: Section 1: Specification for locking systems
MS 1742-2: Section 2:2004
Vehicle security systems: Part 2: Locking systems: Section 2: Specification for central power locking systems
MS 1742-2: Section 3:2004
Vehicle security systems: Part 2: Locking systems: Section 3: Specification for dead locking systems
MS 1742-2: Section 4:2004
Vehicle security systems: Part 2: Locking systems: Section 4: Specification for devices for ptevention against unauthorised use
MS 1742-3:2004
Vehicle security systems: Part 3: Specification for alarm systems
MS 1742-4: 2004
Vehicle security systems: Part 4: Specification for immobilizer
Kaedah-kaedah Kenderaan Motor
(Pembinaan & Penggunaan) (Pindaan)
2011
ELECTRIC MOTORCYCLE - SPECIFICATION - PART 1: GENERAL
ELECTRIC MOTORCYCLE - SPECIFICATION - PART 2: SAFETY
ELECTRIC MOTORCYCLE - SPECIFICATION - PART 3: PERFORMANCE TEST
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012ISC Name of Act Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Agency Contact details
M 193 38
194 MS 982:1985 BOMBA
195 MS 983:2004
196
197
198 AMD. 1:2003
199 Fire Dampers: Part 1: Specification
200 Fire Dampers: Part 2: Installation (2nd revision)
201
202
203
204 MS 1488:2006 Fire Fighting Hoses-Semi-Rigid Hoses for Fixed Systems
205
206
207 Fire Detection and Fire Alarm Systems: Part 1: Introduction
208
209
210
211
212
213 BOMBA
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Fire Safety and
Prevention
Street, Drainage and Building Act 1974[Act 133]
Uniform Building By-Laws 1984 (Amendment 1991) Inserting new By-Law 34(A)By-Law 34(A)(2)
MS 1183: Part 8: 1990 (P)
Specification for Fire Precautions in the Design and Construction of Buildings: Part 8: Code of Practice for Means of Escape for Disabled People
Jbtn. Perancangan Bandar &
Desa Semenanjung Malaysia
Pn. Aminah Abd. RahmanEmel:[email protected]: 03-20874501Faks: 03-20953717
En. Fadzli ZubiEmel:[email protected]: 03-26989211Faks: 03-26933964
Street, Drainage and Building Act 1974
[Act 133]
Fire Services Act 1988
Uniform Building By-Laws 1984 (G.N.
5178/84)
Arahan Tetap Bomba
Specification For Fire Safety Signs, Notices and Graphic Symbols
En. Nordin PauziEmel:[email protected]: 03-83185444/ 019-2217006Faks: 03-83195244
KELUAR' SIGNS ( INTERNALLY ILLUMINATED) - SPECIFICATIONS (THIRD REVISION)
MS 1038: Part 1: 1986
Specification for Emergency Lighting of Premises Part 1: Premises Other Than Cinemas and Certain Other Specified Premises Used for Entertainment
MS 1073: Part 2: 1996
Specification for Fire Resistant Doorsets: Part 2: Methods for Determination of the Fire Resistance- General Principles
En. Nordin PauziEmel:[email protected]: 03-83185444/ 019-2217006Faks: 03-83195244
MS 1073: Part 3: 1996
Specification for Fire Resistant Doorsets: Part 3: Methods for Determination of the Fire Resistance- Type of Doorsets
MS 555: Part 1: 2003
MS 555: Part 2: 2003
MS 1447: Part 1: 2006
Fixed Firefighting Systems-Hose Systems: Part 1: Hose Reels with Semi Rigid Hose
Replaced MS 1447:1999
MS 1447: Part 2: 2006
Fixed Firefighting Systems-Hose Systems: Part 2: Hose Systems with Lay-Flat Hose
Replaced MS 1447:1999
MS 1447: Part 3: 2006
Fixed Firefighting Systems-Hose Systems: Part 3: Maintenance of Hose Reels with Semi Rigid Hose and Hose Systems with Lay-Flat Hose
Replaced by MS 1488:2006
MS 1539: Part 1: 2002
Specification for Portable Fire Extinguishers: Part 1: Construction and Testing Methodology
Cor. 1:2004
Replaced MS 1179:1990
MS 1539: Part 3: 2003
Specification for Portable Fire Extinguishers: Part 3: Selection and Installation-Code of Practice (1st revision)
MS 1745: Part 1: 2004
MS 1745: Part 2: 2004
Fire Detection and Fire Alarm Systems: Part 2: Control and Indicating Equipment
MS 1745: Part 3: 2004
Fire Detection and Fire Alarm Systems: Part 3: Audible Fire Alarm Devices
MS 1745: Part 4: 2004
Fire Detection and Fire Alarm Systems: Part 4: Power Supply Equipment
MS 1745: Part 5: 2005
Fire Detection and Fire Alarm Systems: Part 5: Heat Detectors- Point Detectors
MS 1745: Part 11: 2004
Fire Detection and Fire Alarm Systems: Part 11: Manual Call Points
MS 1745: Part 13: 2006
Fire Detection and Fire Alarm Systems: Part 13: Compatibility Assessment of Systems Components
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012ISC Name of Act Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
M
214
38
AMD. 1:1999
BOMBA
215 AMD.1:1999
216 AMD.1:1999
217 Confirmed: 1999
218 Confirmed: 1999
219 MS 1395:2011 Specification for Pillar HydrantM BOMBA
220
Hose Reel: Part 3: Code of Practice of Installations
221 MS 1910:2006
222 MS 1590:2003
223 MS 1472:1999
224 MS 1780:2005
225
226
227
228
229
230
Fire Safety and
Prevention
Street, Drainage and Building Act 1974
[Act 133]
Fire Services Act 1988
Uniform Building By-Laws 1984 (G.N.
5178/84)
Arahan Tetap Bomba
MS 1210: Part 1: 1991
Specification For Fire Hydrants Systems Equipment: Part 1: Landing Valves for Wet Risers
MS 1210: Part 2: 1991
Specification For Fire Hydrants Systems Equipment: Part 2: Landing Valves for Dry Risers
MS 1210: Part 3: 1991
Specification For Fire Hydrants Systems Equipment: Part 3: Inlet Breeching for Riser Inlets
MS 1210: Part 4: 1991
Specification For Fire Hydrants Systems Equipment: Part 4: Boxes for Landing Valves for Dry Risers
MS 1210: Part 5: 1991
Specification For Fire Hydrants Systems Equipment: Part 5: Boxes for Foam Inlets and Dry Riser Inlets
Fire Safety and
Prevention
Street, Drainage and Building Act 1974
Act [133]
Fire Services Act 1988
Uniform Building By-Laws 1984 (G.N.
5178/84)
Arahan Tetap Bomba
*Refer no. 206
MS 1539: Part 3: 2003
Specification for Portable Fire Extinguishers: Part 3: Selection and Installation-Code of Practice (1st revision)
Replaced by MS 1539: Part 3: 2003
En. Nordin PauziEmel:[email protected]
.myTel: 03-83185444/ 019-2217006
Faks: 03-83195244MS 1489: Part 1:1999
Fire Extinguishing Installations and Equipments: Part 1: Hydrant System, Hose Reel and Foam Inlets
*Refer no. 220
MS 1489: Part 1: 1999
Replaced by MS 1489: Part 1: 1999
Fixed Firefighting System-Automatic Sprinkler System-Design, Installation and Maintenance
Carbon Dioxide Extingushing Systems: Design and Installation
Code Of Practice For Fire Precautions in the Design Of Buildings-Smoke Control in Protected Escape Routes Using Pressurization
Smoke Control System using Natural (Displacement) or Powered (Extraction) Ventilation
MS 1176: Part 5:1990
Specification for Compenents of Automatic Fire Detection System: Part 5: Heat Sensitive Detectors-Point Detectors Containing a Static Element
MS 1176: Part 7:1991
Specification for Compenents of Automatic Fire Detection System: Part 7: Specification for Point-Type Smoke Detectors Using Scattered Light, Transmitted Light or Ionization
MS 1176: Part 8: 1991
Specification for Compenents of Automatic Fire Detection System: Part 8: Specification for High Temperature Heat Detectors
MS 1176: Part 9: 1993
Specification for Compenents of Automatic Fire Detection System: Part 9: Methods of Test of Sensitivity to Fire
MS 1471: Part 3: 1999
Vocabulary on Fire Protection: Part 3: Fire Detection and Alarm
MS 1471:Part 6: 1999
Vocabulary on Fire Protection: Part 6: Evacuation and Means of Escape
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
P
231 MS 1238:2009
MITI
232
233 MS 1494:2000
234 MS 1495:2000
2009
235 MS 1496:2000
236 MS 1795:2005 Steels for cold heading and cold extruding - Specification
237 MS 1945:2006 Free cutting steels
238
239 Rolled carbon steel for cold-finished steel bars
240
241 Carbon steels for machine structural use
242 Cold finished carbon and alloy steel bars
243
244
245 Cold-reduced carbon steel sheet of structural quality
246 Cold-reduced carbon steel sheet for vitreous enamelling
247
248
249
250
251
252
253
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Metallic Materials and Semi-finished Products
Customs Act 1967 [Act 235]
Customs (Prohibition of Imports)
Order 2008 Incorporating latest amendment [P.U.(A)
34/2010]
Specification for galvanized steel wire for aluminium conductors, steel-reinforced
En. Farid Mohd SahatEmel:
[email protected]: 03-62034710Faks:03-62033137
MS 1239: Part 2: 2009
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables: Part 2: Submarine Cables (1st revision)
Specification for billets for hot rolled non-alloyed steel bars and rods
Specification for blooms for hot rolled non-alloyed structural steel sections
Specification for beam blanks for hot rolled non-alloyed structural steel sections
MS 2240: Part 2:2009
Stainless steels for general purposes: Part 2: Semi-finished products, bars, rods and sections
MS 2245:2009 (P)
MS 2246:2009 (P)
Specification for deformed and plain carbon-Steel bars for concrete reinforcement
MS 2247:2009 (P)
MS 2259:2009 (P)
MS ISO 3574:2009 (P)
Cold-reduced carbon steel sheet of commercial and drawing qualities
MS ISO 4960:2009 (P)
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
MS ISO 4997:2009 (P)
MS ISO 5001:2009 (P)
MS ISO 5002:2009 (P)
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
MS ISO 6932:2009 (P)
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
MS ISO 13887:2009 (P)
Cold-reduced steel sheet of higher yield strength with improved formability
MS ISO 14590:2009 (P)
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
MS ISO 16120: Part 1: 2008
Non-alloy steel wire rod for conversion to wire: Part 1: General requirements (1st revision)
MS ISO 16120: Part 2: 2008
Non-alloy steel wire rod for conversion to wire: Part 2: Specific requirements for general purpose wire rod (1st revision)
MS ISO 16120: Part 3: 2008
Non-alloy steel wire rod for conversion to wire: Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel wire rod (1st revision)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
P 2009
254
MITI
255 Bead wire
256
257
258
259
260
261
262 MS 146:2006
CIDB
263 MS 1196:2004
264 MS 1092 : 1987 SPECIFICATION FOR LOW CARBON STEEL WIRE RODS
265 MS 1093 : 1987 SPECIFICATION FOR HIGH CARBON STEEL WIRE RODS
266MS 1137:2009
267PRESTRESSING STEEL - PART 2: COLD-DRAWN WIRE
268PRESTRESSING STEEL - PART 1: GENERAL REQUIREMENTS
269
270
271
272MS 144:2006
273MS 145:2006
274
MS 1705:2003
MITI275 MS 1721 :2003 Structural steels - plates, wide flats and wide strips276 MS 1768:2004 Hot-rolled carbon steel strip for pipes and tubes277
Metallic Materials and Semi-finished Products
Customs Act 1967 [Act 235]
Customs (Prohibition of Imports)
Order 2008 Incorporating latest amendment [P.U.(A)
34/2010]
MS ISO 16120: Part 4: 2008
Non-alloy steel wire rod for conversion to wire: Part 4: Specific requirements for wire rod for special applications
En. Farid Mohd SahatEmel:
[email protected]: 03-62034710Faks:03-62033137
MS ISO 16650:2009 (P)
MS EN 10025: Part 1:2009 (P):2011
Hot rolled products of structural steels: Part 1: General technical delivery conditions
MS EN 10025: Part 2:2009 (P):2011
Hot rolled products of structural steels: Part 2: Technical delivery conditions for non-alloy structural steels
MS EN 10025: Part 3:2009 (P):2011
Hot rolled products of structural steels: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
MS EN 10025: Part 4:2009 (P) :2011
Hot rolled products of structural steels: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
MS EN 10025: Part 5:2009 (P) :2011
Hot rolled products of structural steels: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
MS EN 10025: Part 6:2009 (P):2011
Hot rolled products of structural steels: Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Akta Lembaga Pembangunan Industri Pembinaan Malaysia
(Pindaan)2011
Hot rolled steel bars for the reinforcement of concrete - Specification (3rd revision)
Ir. Mukhtar Che AliEmel:[email protected]
v.myTel: 03-26170359
Faks: 03-40451808
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities (1st revision)
*Refer no. 256 MS EN 10025-
1:2011 Hot rolled products of structural steels: Part 1: General technical delivery conditions
LOW CARBON STEEL WIRES - SPECIFICATION (FIRST REVISION)
MS 1138 :Part 2 : 2007
MS 1138: Part 1 : 2007
MS 1138: Part 3 : 2007
PRESTRESSING STEEL - PART 3: STEEL BARS (QUENCHED AND TEMPERED)
MS 1138: Part 4 : 2007
PRESTRESSING STEEL - PART 4: STRAND FOR PRESTRESSED CONCRETE
MS 1239-1:2009
ZINC OR ZINC COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - LAND CABLES (FIRST REVISION)
COLD REDUCED MILD STEEL WIRE FOR THE REINFORCEMENT OF CONCRETE - SPECIFICATION (THIRD REVISION)
WELDED STEEL FABRIC FOR THE REINFORCEMENT OF CONCRETE - SPECIFICATION (THIRD REVISION)
Customs Act 1967 [Act 235]
Customs (Prohibition of Imports)
Order 2008 Incorporating latest amendment [P.U.(A)
34/2010]
Hot-rolled carbon steel strip and sheet of commercial and drawing qualities
En. Farid Mohd SahatEmel:
[email protected]: 03-62034710Faks:03-62033137
MS 2025: Part 1: 2006
Cold formed sheet piling of non alloy steels: Part 1: Technical delivery
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
278
MITICustoms Act 1967 [Act 235]
Customs (Prohibition of Imports)
Order 2008 Incorporating latest amendment [P.U.(A)
34/2010]
En. Farid Mohd SahatEmel:
[email protected]: 03-62034710Faks:03-62033137
MS 2025: Part 2: 2006
Cold formed sheet piling of non alloy steels: Part 2: Tolerances on shape and dimension
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012ISC Name of Act Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Agency Contact details
R ST(lP/KKE) 16/1 (3) 279 ST
S 280 ST
281 MS IEC 60065:2007 Audio, video and similar electronic apparatus – safety requirements (1st revision)
282 MS IEC 60400:2006 Lampholders for tubular fluorescent lamps and starterholders283 MS 769:1982 Confirmed 2006 ST
284
285 Luminaires: Part 2: Particular requirements: Section 2: Recessed luminaires
286 MS IEC 61048:2006
287 MS IEC 61049:1999
288 Lamp controlgear: Part 1: General and safety requirements
289 Lamp controlgear: Part 2-8: Particular requirements for ballast for fluorescent lamps
290 AMD.1: 1997
291
292 MS IEC 60929:2001
293 Household and similar electrical appliances – safety: Part 1: General requirements
294
295
296
297
298
299
300 MS 1597-2-35:2010
301
Regulation / By-Laws
Directive/ Circulars/ Guideline
Medical Devices and Facilities for Healthcare
Electricity Supply Act 1990 [Act 447]
Electricity Supply (Electrical Product And Appliance Safety) Regulations 2008
MS IEC 60364-7-710:2009
Electrical Installations of Buildings: Part 7-710: Requirements for Special Installations or Locations-Medical Locations
Pn. Fairus Abd. ManafEmel:[email protected]: 03-88708607Faks: 03-88888652
Electrical and
Electronic Equipments
and Accessories
Electricity Supply Act 1990 [Act 447]
Approval of Electrical EquipmentElectricity Regulations 1994 -
P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)
40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]
ST DirectiveInformation Booklet
2009 Edition
MS IEC 60320-1:2010
Appliances couplers for household and similar general purposes: Part 1: General requirements
Ir. Amir HassanEmel:[email protected]
Tel: 03-88708605Faks: 03-88888652
Specification for bayonet lamps-caps lampholders and B.C. adaptors (lampholder dr plugs)
MS IEC 60598-2:Section 1:1997
Luminaires: Part 2: Particular requirements: Section 1: Fixed general purpose luminaires
MS IEC 60598-2: Section 2:1998
Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements
Capacitors for use in tubular fluorescent and other discharge lamp circuits performance requirements
MS IEC 61347-1:2003
MS IEC 61347-2-8:2003
MS 141-2:1993,AMD.1:1997
Specification for ballasts for tubular fluorescent lamps: Part 2: Performance requirements
MS IEC 61347-2-3:2003
Lamp controgear: Part 2-3: Particular requirements for a.c supplied electronic ballasts for fluorescent lamps
Specification for a.c supplied electronic ballasts for tubular fluorescent lamps-performance requirements
MS IEC 60335-1:2003
MS IEC 60335-2-2:2006
Household and similar electrical appliances - Safety: Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliance
MS IEC 60745-2-15:2006
Safety of hand-held motor-operated electric tools: Art 2-15: Particular requirements for hedge trimmers and grass shears
MS IEC 60335-2-21:2005
Household and similar electrical appliances – Safety: Part 2-21: Particular requirements for storage water heaters
MS IEC 60335-2-23:2005
Household and similar electrical appliances – safety: Part 2-23: Particular requirements for appliances for shin or hair care
MS IEC 60335-2-28:2003
Household and similar electrical appliances - Safety: Part 2-28: Particular requirements for sewing machines
MS IEC 60335-2-101:2003
Household and similar electrical appliances - Safety: Part 2-101: Particular requirements for vaporizers
Safety of household and similar electric appliances: Part 2-35: Particular requirements for instantaneous water heater (1st revision)
MS IEC 60598-2:Section 4:2003
Luminaires: Part 2: Particular requirements: Section 4: Portable general purpose luminaires (1st revision)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012ISC Name of Act Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
S 302 ST
303
304
305
306
307
308
309
310
311
312
313 MS 1597-2-6:2003
314
315 MS 1219-2:2002
316 MS 1220:2010 Performance and construction of electric circulating fans and regulators
317
318
319
320
321
322
323
324
325 Luminaires: Part 2-20: Particular requirements - Lighting chains
326 Hand-held motor-operated electric tools – Safety: Part 1: General requirements
327
328
329
330
331
332
Electrical and
Electronic Equipments
and Accessories
Electricity Supply Act 1990 [Act 447]
Approval of Electrical EquipmentElectricity Regulations 1994 -
P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)
40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]
ST DirectiveInformation Booklet
2009 Edition
MS IEC 60598-2-8:2006
Luminaires: Part 2-8: Particular requirements handlamps (1st revision)Ir. Amir HassanEmel:[email protected]: 03-88708605Faks: 03-88888652
MS IEC 60335-2-12:2003
Household and similar electrical appliances - Safety: Part 2-12 : Particular requirements for warming plates and similar appliances
MS IEC 60335-2-15:2004
Household and similar electrical appliances - Safety: Part 2-15: Particular requirements for appliances or heating liquids
MS IEC 60335-2-13:2006
Household and similar electrical appliances - Safety: Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
MS IEC 60335-2-9:2006
Household and similar electrical appliances - Safety: Part 2-9: Particular requirements for grills, toasters, and similar portable cooking appliances
MS IEC 60335-2-36:2003
Household and similar electrical appliances - Safety: Part 2-36 : Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
MS IEC 60335-2-3:2006
Household and similar electrical appliances - Safety: Part 2-3: Particulars requirements for electric iron
MS IEC 60335-2-8:2002
Safety of household and similar electrical appliances - Safety: Part 2-8 : Particular requirements for shavers, hair clippers and similar appliances
MS IEC 60335-2-14:2003
Household and similar electrical appliances – Safety: Part 2-14: Particular requirements for kitchen machines (1st revision)
MS IEC 60335-2-73:1996
Household and similar electrical appliances - Safety: Part 2-73: Particular requirements forfixed immersion heaters
MS IEC 60335-2-74:2010
Household and similar electrical appliances - Safety: Part 2-74 : Particular requirements for portable immersion heaters
Ir. Amir HassanEmel:[email protected]
Tel: 03-88708605Faks: 03-88888652
Household and similar electrical appliances - Safety: Part 2-6 : Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
MS IEC 60335-2-25:2007
Household and similar electrical appliances - Safety: Part 2-25: Particular requirements for microwave ovens
Safety of household and similar electrical appliances : Part 2 : Particular requirements for fans
MS 1597-2-80:2007
Household and similar electrical appliances - Safety: Part 2-80: Particular requirements for fans (2nd revision)
MS IEC 60335-2-31:2003
Household and similar electrical appliances - Safety: Part 2-31: Particular requirements for range hoods
MS IEC 60335-2-98:2003
Household and similar electrical appliances - Safety: Part 2-98: Particular requirements for humidifiers
MS IEC 60335-2-4:2007
Household and similar electrical appliances - Safety: Part 2-4: Particular requirements for spin extractors
MS IEC 60335-2-7:2007
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES (FIRST REVISION) (IEC 60335-2-7:2006, IDT)
MS IEC 60335-2-11:2003
Household and similar electrical appliances - Safety: Part 2-11: Particular requirements for tumble dryers (1st revision)
MS IEC 60335-2-43:2007
Household and similar electric appliances - Safety: Part 2-43: Particular requirements for cloths dryers and towel rails
MS IEC 60335-2-24:2002
Safety of household and similar electrical appliances: Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
MS IEC 60598-2-20:2005
MS IEC 60745-1:2010
MS IEC 60745-2-5:2010
Hand-held motor-operated electric tools-Safety: Part 2-5: Particular requirements for circular saws
MS IEC 60745-2-1:2011
Hand-held motor-operated electric tools - Safety: Part 2-1: Particular requirements for drills and impact drills
MS IEC 60745-2-3:2010
Safety of handheld motor-operated electric tools: Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
MS IEC 60745-B3452-4:2011
Hand-held motor-operated electric tools - Safety: Part 2-4: Particular requirements for sanders and polishers other than disk type
MS IEC 60745-2-7:2005
Safety of handheld motor-operated electric tools: Part 2-7: Particular requirements for spray guns for non-flammable liquids
MS IEC 60745-2-11:2005
Hand-held motor-operated electric tools -Safety: Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012ISC Name of Act Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
S 333 ST
334
335
336
337 AMD.1: 2005
ST (IP/KKE) 16/2/1(11) 338 MS 62115:2008 Electric Toys Safety
339 MS 619-2-22:2005 KPDNKK
Arahan Tetap Bomba Luminaires: Part 1: General requirements and test BOMBA
340 MS 60335-2-6:1999 ST
341
Lamp controlgear: Part 2-8: Particular requirements for ballast for fluorescent lamps
MS 141-2:1993
342 Information technology equipment – Safety: Part 1: General equipment
U 343 MS 1875:2006 Penentuan untuk Isi Kacang Tanah Mentah 1
Z 344 MS 1596:2003 2
345 MS 1723:2003
345
Electrical and
Electronic Equipments
and Accessories
Electricity Supply Act 1990 [Act 447]
Approval of Electrical EquipmentElectricity Regulations 1994 - P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A) 40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]
ST DirectiveInformation Booklet 2009 Edition
MS IEC 60745-2-14:2011
Hand-held motor-operated electric tools - Safety: Part 2-14: Particular requirements for planers requirements for planers
Ir. Amir HassanEmel:[email protected]: 03-88708605Faks: 03-88888652
MS IEC 60745-2-17:2005
Hand-held motor-operated electric tools -Safety: Part 2-17: Particular requirements for routers and trimmers
MS IEC 60335-2-79:2007
Household and similar electrical appliances - Safety: Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
MS IEC 60335-2-45:2003
Household and similar electrical appliances - Safety: Part 2-45: Particular requirements for portable heating tools and similar appliances (1st revision)
MS IEC 60335-2-76:2007
Household and similar electrical appliances - safety: Part 2-76: Particular requirements for electric fence energizers
Electricity Supply Act 1990 [Act 447]
Electricity Supply (Electrical Product And Appliance Safety) Regulations 2008
Pn. Fairus Abd. ManafEmel:[email protected]: 03-88708607Faks: 03-88888652
Consumer Protection Act 1999 [Act 599]
Consumer Protection (Safety Standards For Toys) (Amendment) Regulations 2010
Luminaires: Part 2-22: Particular Requirements-Luminaires for Emergency Lighting (1st revision) Pn Thiagaletchumi V.
ManiamEmel: [email protected]: 03-8882 5862Faks: 03-88826960
Street, Drainage and Building Act 1974 [Act 133]
Fire Services Act 1988
Uniform Building By-Laws 1984 (G.N. 5178/84)
*Refer no. 161
MS IEC 60598-1:2006
Replaced MS 619: Part 102: Sec 102.22: 1985 (P)
En. Nordin PauziEmel:[email protected]: 03-83185444/ 019-2217006Faks: 03-83195244
Electricity Supply Act 1990 [Act 447]
Approval of Electrical EquipmentElectricity Regulations 1994 -
P.U.(A) 38/94;[Am: P.U.(A) 290/94, P.U.(A)
40/95, P.U.(A) 192/98, P.U.(A) 397/99, P.U.(A) 431/2003]
ST DirectiveInformation Booklet
2009 Edition
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES (SECOND REVISION)
Pn. Fairus Abd. ManafEmel:[email protected]
Tel: 03-88708607Faks: 03-88888652
MS IEC 60335-2-29:2005
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29 : PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
ST/IP/PK/JKKE/Pk 02/2011
*Refer no. 289 & 290
MS IEC 61347-1:2003
Lamp controlgear: Part 1: General and safety requirements
*Refer no. 289 & 290
MS IEC 61347-2-8:2003
*Refer no. 290
SPECIFICATION FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS : PART 2 : PERFORMANCE REQUIREMENTS
Communications And Multimedia Act 1998
[Act 588]
Customs (Prohibition of Imports) Order 2008
Incorporating latest amendment [P.U.(A) 34/2010]
MS IEC 60950: Part 1
Federal Agricultural Marketing Authority Act 1965 (Revised 1974) [Act 141]
Federal Agricultural Marketing Authority (Grading, Packaging And Labelling Of Agricultural Produce) Regulations 2008
MS 457 & MS 458 telah digabung menjadi MS 1875
Environmental
Management
Environmental Quality Act 1974 [Act 127]
Environmental Quality (Clean Air) Regulations 1978 - P.U.(A) 280/78
Determination of Concentration and Mass Flow of Particulate Matter in Flue Gas for Stationary Source Emissions
JAS (Bhgn Udara)
Pn. Nor Rashidah Mohd GhazaliEmel:[email protected]: 03-88712326Faks: 03-88884151
Performance Evaluation of Air Pollution Control & Treatment Systems: Mecghanical Dust Collectors
MANDATORY STANDARDS BASED ON INDUSTRIAL STANDARDS COMMITTEE (ISC)
ISC Field
A Agriculture
B Chemicals and Materials
D Building, Construction and Civil Engineering
E Generation, Transmission and Distribution of Energy
F Mechanical Engineering
H Petroleum and Gas
L Road Vehicles
M Fire Safety and Prevention
P Metallic Materials and Semi-finished Products
R Medical Devices and Facilities for Healthcare
S Electrical and Electronics Equipmets and Accessories
U Food and Food Products
Z Environmental Management
TOTAL
MANDATORY STANDARDS BASED ON REGULATORS
ISC Field Regulator Malaysian Standards (MS)
A Agriculture 35
DOA 1FAMA 33MPOB 1
B Chemicals and Materials 9
KPDNKK 7MITI 2
D Building, Construction and Civil Engineering 48
BOMBA 1CIDB 29
2
JKT, KPKT 16
E 69
BOMBA 1SKMM 4ST 64
F Mechanical Engineering 8
CIDB 2KPDNKK 1MITI 3DOSH 2
H Petroleum and Gas 6
BOMBA 2JAS (Bhgn Udara) 2
Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia
Generation, Transmission and Distribution of Energy
JPJ 1MITI 1
L Road Vehicles 17
JPJ 17
M Fire Safety and Prevention 38
BOMBA 371
P Metallic Materials and Semi-finished Products 48
CIDB 12MITI 36
R Medical Devices and Facilities for Healthcare 1
ST 1
S 63
BOMBA 1KPDNKK 1ST 61
U Food and Food Products 1
FAMA 1
Z Environmental Management 2
JAS (Bhgn Udara) 2
Grand Total 345
Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia
Electrical and Electronics Equipmets and Accessories
REGULATORS AND NUMBER OF THEIR MANDATORY STANDARDS AS OF 10 FEB 2012
No. Regulator
1 Energy Commission (ST) 132
2 Royal Malaysian Customs Department (Customs) 43*
3 Fire and Rescue Department of Malaysia (BOMBA) 60**
4 Construction Industry Development Board (CIDB) 34
5 Federal Agriculture Marketing Authority (FAMA) 16
6 Local Government Department, KPKT 18
7 Road Transport Department (JPJ) 8***
8 Malaysian Communications and Multimedia Commission (MCMC) 9
9 Ministry of Domestic Trades, Co-operatives and Consumerism (KPDNKK) 3
10 Department of Environment (DoE) 1
11 Town Planning Department, KPKT 1
12 Malaysian Palm Oil Board (MPOB) 35
13 Department of Agriculture (DoA) 1
TOTAL 361
NOTES
* 1 MS already calculated under ST** 4 MS already calculated under ST
Number of Mandatory Standards
