Datasheet

Stay in control with customizable monitoring and interfaces.iControl SNMP for iControl Web from Grass Valley, a Belden Brand, simplifies SNMP monitoring and control across multiple signal formats and platforms over an entire network.

iControl SNMP Offers The Most Extensive Library of SNMP Drivers

iControl offers one of the most extensive libraries of SNMP drivers in the industry, and this library is continuously being expanded. It ranges from routing switchers to receivers, and from signal analyzers to encoders. It includes all key platforms from a wide variety of vendors: Tektronix, Motorola, Riedel, IneoQuest, Bridge Tech, Mirifice, Harmonic, Tampa Microwave, APC, Phoenix Broadband, TSL, Mixed Signals, Video Frame, Cisco Systems, Alcatel Lucent, Scopus, Sencore, Tandberg Television, RGB Networks, Big Band Networks, JDSU, Ensemble Design, Evertz, Snell, Pinnacle, Dev, Wegener, ETL, Work, Harris/Imagine Communications, Newtec, Xicom Technology, Lawo, Pesa, Pro-Bel, Thomson, SeaChange, Omneon, Alpermann+Velte, Quest Controls, etc.

Embedded SNMP MIB Browser• Allows any SNMP-enabled device to interface to

iControl• Load SNMP MIB files from all SNMP-enabled platform• Perform control and monitoring of devices• Supports SET and GET commands• Easily drop items into iControl Website Creator for

graphical depiction of elements in iControl’s visually rich user interfaces

• Quickly drop items into the iControl Alarm Browser for advanced management of alarms, including logging, scheduling, email notification

SNMP Driver Creator

The iControl SNMP Driver Creator allows any user to create his own SNMP drivers for iControl. By simply loading the SNMP MIB file of any SNMP Agent, the Driver Creator’s intuitive user interface allows even the most abstract data collected from SNMP agents to be interpreted as human-readable information in iControl.

Using a series of simple rules, the Driver Creator allows a user to easily create Mapping Rules to translate “cryptic” data and status into human-readable terms, and to expose the performance of a device in clear and concise way.

In addition, the Driver Creator allows a user to adjust the polling interval to best suit the responsiveness of an agent.

The resulting device information can be added to the iControl Alarm Browser, or it can be compiled as generic drivers to be applied to multiple agents.

www.grassvalley.com 1

iControl SNMPMonitoring and Control of All Key Elements using iControl SNMP

Belden, Belden Sending All The Right Signals and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affiliated companies in the United States and other jurisdictions. Grass Valley, Densité, iControl and Kaleido are trade-marks or registered trademarks of Grass Valley. Belden Inc., Grass Valley and other parties may also have trademark rights in other terms used herein.

Copyright © 2014, 2016 Grass Valley Canada. All rights reserved. Specifications subject to change without notice.

WWW.GRASSVALLEY.COMJoin the Conversation at GrassValleyLive on Facebook, Twitter, YouTube and Grass Valley - A Belden Brand on LinkedIn.

GVB-1-0066B-EN-DS

2

iControl SNMP Monitoring and Control of All Key Elements using iControl SNMP

IC-SNMP-MANAGER SNMP manager softwareIC-SNMP-DRIVER-CREATOR iControl SNMP driver creator — Allows creation of iControl SNMP

drivers for third-party devicesIC-BASE-EDITION-V3 iControl Base Edition including: 1 RU Dell PowerEdge R330 applica-

tion server, iControl navigator application, GSM alarm management service and Densité card management service

IC-BASE-EDITION-ENT-V3 iControl Base Edition including: 1 RU Enterprise-Grade Dell Power-Edge R330 application server with redundant power supplies and disk drive with RAID controller, iControl navigator application, GSM alarm management service and Densité card management service

ORDERING

KEY FEATURES

Embedded SNMP MIB Browser• Allows any SNMP-enabled device to interface to iControl• Load SNMP MIB files from all SNMP-enabled platform• Perform control and monitoring of devices• Supports SET and GET commands

• Easily drop items into iControl Website Creator for graphical depiction of elements in iControl’s visually rich user interfaces

• Quickly drop items into the iControl Alarm Browser for advanced manage-ment of alarms, including logging, scheduling and email notification

iControl as an SNMP manager

Third-party device iControl SNMPiControl Web

• Grass Valley uses SNMP to collect status of third-party devices

• iControl can also control other devices using SNMP

iControl Application Server

APPLICATION SERVER

Monitoring and control of all key elements using iControl SNMP

iControl SNMP for iControl Web simplifies SNMP monitoring and control across multiple signal formats and platforms over an entire network.

iControl abstracts various user interfaces to a single interface to simplify monitoring and control

Third-party receivermodel A

Third-party receivermodel B

Third-party receivermodel C

Third-party receivermodel D

Third-party receivermodel E

One common operator interface

Multiple models, multiple vendors

iControl as an SNMP agent

• Densité modular products and Kaleido multiviewers provide direct SNMP support

• iControl application server provides SNMP support for all supported devices, including third-party devices

iControl Application Server

Kaleido multiviewer

KALEIDO-MX

Densité modular productsImagestore 750

channel branding

iControl SNMPAPPLICATION SERVER