2
DB SERIES FINISH THOMPSON PUMPING SOLUTIONS AROUND THE WORLD MODEL DB9 finishthompson.com DB9 PERFORMANCE 3450 RPM DB9 PERFORMANCE 1725 RPM 0 10 20 30 40 50 60 70 0 10 FLOW (gpm) 0 3 6 9 12 15 18 21 1 2 3 4 5 6 7 8 9 10 11 FLOW (m 3 /hr) Curve Legend #1- 4.18" (106.2 mm) NPSHr #1 25% 45% 25% 35% 35% 45% 50% 55% Min. Flow- 0.5 US gpm (1.9 lpm) NPSHr (ft) HEAD (ft) NPSHr (m) HEAD (m) 30 40 50 20 0 0.50 Hp 0.75 Hp 0 2 4 6 8 10 12 14 16 18 0 5 10 15 20 25 FLOW (gpm) HEAD (ft) 0 2 3 4 5 FLOW (m 3 /hr) NPSHr (m) Curve Legend #1- 4.18" (95.2 mm) NPSHr #1 0.10 Hp Min. Flow- 0.25 US gpm (0.95 lpm) 25% 45% 25% 35% 35% 45% 50% 55% HEAD (m) NPSHr (ft) 0 1 2 3 4 5 1 FEATURES & CAPABILITIES + Five-year warranty + Extended run dry ability (with carbon bushing) + High operating efficiency + Polypropylene or PVDF construction + Powerful neodymium magnets + Close-coupled design + Threaded (NPT or BSP), flanged, or union connections + Horizontal or vertical installation with IEC motor + Back pullout design + Mounts to NEMA and IEC (B5 & B14) motor frames + Easy set measurement free drive + ISO 1940 G2.5 balancing + CE certified/ATEX available + Working pressure to 80 psi (5.5 bar) + Specific gravity over 1.8 + Viscosity up to 150 cP + Polypropylene—180 o F (82 o C) + PVDF—220 o F (104 o C) APPLICATIONS + Chemical processing + Plating + Water and wastewater + Electronics + Pharmaceuticals + Wet scrubber + Pulp and paper + Heat exchanger + and many more!

DB SERIES - Sisdoz · db series finish thompson pumping solutions around the world model db9 finishthompson.com db9 performance 3450 rpm db9 performance 1725 rpm 0 10 20 30 40 50

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DB SERIES - Sisdoz · db series finish thompson pumping solutions around the world model db9 finishthompson.com db9 performance 3450 rpm db9 performance 1725 rpm 0 10 20 30 40 50

DB SERIES

FINISH THOMPSON PUMPING SOLUTIONS AROUND THE WORLD

MODEL DB9

finishthompson.com

DB9 PERFORMANCE 3450 RPM

DB9 PERFORMANCE 1725 RPM

0

10

20

30

40

50

60

70

0 10FLOW (gpm)

0

3

6

9

12

15

18

21

1 2 3 4 5 6 7 8 9 10 11FLOW (m3/hr)

Curve Legend#1- 4.18" (106.2 mm)

NPSHr

#1

25%

45%

25%

35%

35%

45%

50%

55%

Min. Flow- 0.5 US gpm (1.9 lpm)

NP

SH

r (ft)

HE

AD

(ft)

NPS

Hr (

m)

HEA

D (m

)

30 40 5020

0

0.50 Hp

0.75 Hp

0

2

4

6

8

10

12

14

16

18

0 5 10 15 20 25FLOW (gpm)

HEA

D (f

t)

0

2

3

4

5

FLOW (m 3/hr)

NPS

Hr

(m)

Curve Legend#1- 4.18" (95.2 mm)

NPSHr

#1

0.10 Hp

Min. Flow- 0.25 US gpm (0.95 lpm)

25% 45%

25%

35%

35%

45%

50%

55%

HEA

D (m

)

NPS

Hr (

ft)

0 1 2 3 4 5

1

FEATURES & CAPABILITIES

+ Five-year warranty

+ Extended run dry ability (with carbon bushing)

+ High operating efficiency

+ Polypropylene or PVDF construction

+ Powerful neodymium magnets

+ Close-coupled design

+ Threaded (NPT or BSP), flanged, or union connections

+ Horizontal or vertical installation with IEC motor

+ Back pullout design

+ Mounts to NEMA and IEC (B5 & B14) motor frames

+ Easy set measurement free drive

+ ISO 1940 G2.5 balancing

+ CE certified/ATEX available

+ Working pressure to 80 psi (5.5 bar)

+ Specific gravity over 1.8

+ Viscosity up to 150 cP

+ Polypropylene—180o F (82o C)

+ PVDF—220o F (104o C)

APPLICATIONS+ Chemical processing+ Plating+ Water and wastewater+ Electronics+ Pharmaceuticals+ Wet scrubber+ Pulp and paper+ Heat exchanger+ and many more!

Page 2: DB SERIES - Sisdoz · db series finish thompson pumping solutions around the world model db9 finishthompson.com db9 performance 3450 rpm db9 performance 1725 rpm 0 10 20 30 40 50

Kalrez® is a registered trademark of DuPont Performance Elastomers Simriz® Perfluoroelastomer is a registered trademark of the Simrit® division of Freudenberg-NOK Hastelloy® C is a registered trademark of Haynes International, Inc.

DB SERIES

FINISH THOMPSON INC. - HEADQUARTERS 921 Greengarden Road | Erie, PA 16501 800.934.9384 | ph 814.455.4478 | fx 814.455.8518email [email protected]

FINISH THOMPSON INC. - EUROPE CENTEROtto-Hahn-Strasse 16 | Maintal, D-63477 Germany49 (0)6181-90878-0 | fx 49 (0)6181-90878-18email [email protected] finishthompson.com

Specifications

Dimensions

Description Polypropylene PVDF

1 Impeller housing Glass-fiber reinforced

polypropylene (GF PP)

Carbon-fiber reinforced

PVDF (CF PVDF)

1A Impeller housing thrust ring

High purity alumina ceramic or silicon carbide (SiC)

2 O-ring FKM, EPDM, Simriz®, or Kalrez

3 Impeller GF PP CF PVDF

3A Impeller thrust ring GF molybdenum disulfide filled PTFE, or SiC

4 Inner drive Neodymium iron boron

magnets encapsulated

in unfilled polypropylene

Neodymium iron boron

magnets encapsulated

in unfilled PVDF

5 Bushing Carbon, PTFE, high purity alumina ceramic, or SiC

6 Shaft High purity alumina ceramic, Hastelloy® C, or SiC

7 Barrier GF PP CF PVDF

7A Barrier thrust ring Silicon carbide

8 Clamp ring Ductile iron

9 Motor adapter GF PP

10 Outer drive magnet Nickel-plated neodymium iron boron magnets/

steel

11A Motor adapter11B sealing kit (NEMA only)11C

Buna N, FKM, or EPDM

Motor Frame A B† C D E lbs. [kg] PP lbs. [kg] PVDF

NEMA 56C 7-3/16” [18.3 cm] 17-7/16” [44.3 cm] 2-7/16” [6.2 cm] 4-7/8” [12.4 cm] 3-1/2” [8.9 cm] 10.5 [4.8] 11.1 [5.0]

NEMA 145TC 7-3/16” [18.3 cm] 17 15/16” [45.6 cm] 2-3/4” [7.0 cm] 5-1/2” [14.0 cm] 3-1/2” [8.9cm] 10.5 [4.8] 11.1 [5.0]

IEC 63 w/B14 or B5 7-5/8” [19.4 cm] 14-7/8” [37.8 cm] 1-31/32” [5.0 cm] 3-15/16” [10.0 cm] 2-15/32” [6.3 cm] 14.0 [6.4] 15.0 [6.8]

IEC 71 w/B14 or B5 7-5/8” [19.4 cm] 15-13/16” [40.2 cm] 2-7/32” [5.6 cm] 4-13/32” [11.2 cm] 2-25/32” [7.1 cm] 14.0 [6.4] 15.0 [6.8]

Dimensions and weights are for reference only. Weights listed are for pump only; motor not included.†Varies with motor manufacturer.

1" MNPT OR MBSP

B†

A

E

7 3/16"(18.3 cm)2 15/32"

(6.3 cm)

1" FNPT OR FBSP

D

C

F1 G1

H1

1Dimensions for F, G, and H can be found in the Outline Dimensions booklet in the Downloads section of www.finishthompson.com.

Also available 1” x 1” 150 lb. ANSI/ISO PN20/PN40/JIS 10K or 32mm x 32mm union connection. Flanges are in compliance with bolting dimensions only.