DCMDEMOLITIONCONSTRUCTIONMOVING

DEMOLITION EXCAVATION REMEDIATION PLANT HIRE

www.awdemolition.co.uk - awdemolition@gmail.comAW Demolition, Bowden House, Macdonald Road, Irlam, Manchester, M44 5LH

Austin Wilkinson Demolition are experienced in all aspects of demolition, remediation, asbestos removal, excavation and plant hire.

Working nationwide to complete contracts efficiently and safely. All staff are NVQ qualified and take part in the latest demolition training.

Factories

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

UK COALAs one of the UK’s largest coal producers, UK COAL understandably employ a large fleet of equipment to extract the “Black Gold” from the ground. Supplying around 7% of the country’s energy needs for electricity generation. One of UK COAL’s completed projects, Cutacre, was situated just off the M61 near Bolton and included the reclamation of old colliery workings and spoil dumps covering a working area of 200 hectares of a total site measuring 320 hectares.

While 300 tonne O&K RH120s undertake the bulk of the rock extraction a smaller 80t RH30D in face shovel guise is being used along side a subbies Hyundai 210LC to clean away the last vestiges of rock before the coal cleaning work can commence. The excess rock is loaded into a number of Cat D350E ADTs before UK Coals own O&K RH9 coal shovel comes along to skim off the seams of coal which can vary on site between 170mm and 1.8m deep thus requiring a steady hand to avoid getting too much contamination in the coal.

Another area, away from the main soil strip, was also being prepared this time another of UK Coals RH30D backhoes was digging to formation and loading a fleet on Cat D400D ADTs again making light work of loading a stiff clay type material into the Cats.

UK COALAs one of the UK’s largest coal producers, UK COAL understandably employ a large fleet of equipment to extract the “Black Gold” from the ground. Supplying around 7% of the country’s energy needs for electricity generation. One of UK COAL’s completed projects, Cutacre, was situated just off the M61 near Bolton and included the reclamation of old colliery workings and spoil dumps covering a working area of 200 hectares of a total site measuring 320 hectares.

While 300 tonne O&K RH120s undertake the bulk of the rock extraction a smaller 80t RH30D in face shovel guise is being used along side a subbies Hyundai 210LC to clean away the last vestiges of rock before the coal cleaning work can commence. The excess rock is loaded into a number of Cat D350E ADTs before UK Coals own O&K RH9 coal shovel comes along to skim off the seams of coal which can vary on site between 170mm and 1.8m deep thus requiring a steady hand to avoid getting too much contamination in the coal.

Another area, away from the main soil strip, was also being prepared this time another of UK Coals RH30D backhoes was digging to formation and loading a fleet on Cat D400D ADTs again making light work of loading a stiff clay type material into the Cats.

ROTAR ENGINEERED TO GRAB ATTENTION AND EVERYTHING ELSE

THE PLANT MACHINERY SOLUTIONSEPARATION/CRUSHING/MIXING/WASHING/SCREENING/RECYCLING/DEMOLITION

01606 83 55 44www.worsleyplant.co.uk

But don’t just take our word for it...

NFDC, Resurgam House, Paradise, Hemel Hempstead, Herts, HP2 4TFT:01442 217144 F:01442 218268 W: www.demolition-nfdc.com

Competent•TrustedAudited• Experienced

Just a few reasons why using an NFDC member means you are getting

the best of the best...DRIDSDemolition and Refurbishment Information Data Sheets

Found out more todaY:www.nfdc-drids.co.uk

Discover how the award-winning DRIDS have been developed to provide the demolition and refurbishment industry with relevant

knowledge and practicable information on materials and products that they currently

manage, or required to manage in the future. “Using NFDC members means CDM2007 Appendix 4

is fully covered and my clients have discharged their duties and employed competent contractors,

which makes all of our jobs a lot easier.”- John Woodward, C&D Consultancy

For more information on the National Federation of Demolition Contractors please visit our website.

• CDM-C Services for all demolition projects from £10000 to £10million

• 5 Full IDE members in the team

• Specialists in tower block demolitions (we currently have 23 tower blocks under way)

• NDTG approved trainers delivering over 130 different training courses throughout Europe

• Approved “Zero Harm” trainers

• Approved as World Wide trainers for Rammer

• NFDC ISP member

WHY ARE DIFFERENT TO THE REST?

www.demolishdismantle.co.uk - www.demolitiontraining.commargaret@demolishdismantle.co.uk - Call John Woodward on 07870 404906

ROTAR ENGINEERED TO GRAB ATTENTION AND EVERYTHING ELSE

THE PLANT MACHINERY SOLUTIONSEPARATION/CRUSHING/MIXING/WASHING/SCREENING/RECYCLING/DEMOLITION

01606 83 55 44www.worsleyplant.co.uk

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

ascroft transportAscroft Transport based in Tarleton near Preston are the preferred haulage contractor for the UK Cat-erpillar dealers, Finning.

Boasting a very well turned out fleet of high specification vehicles, the company have vehicles in their own livery as well as that of their client.

Vehicle choice is pretty simple with Scania being the preferred vehicle of choice for the top weight 6x4 tractors while further down the weight range Volvo, DAF and Scania vehicles have featured over the past few years.

Trailer choice is also an important part of running a profitable heavy haulage company and Ascroft run a predominately Broshuis fleet with three and four axle step-frames and multi-axle low-loaders featur-ing heavily with a number of Nooteboom low-loaders also present on the trailer park.

Capable of grossing 150 tonnes some of the Ascroft fleet are more than capable of undertaking any haulage task for Finning and can be regularly seen hauling some of the largest Caterpillar earthmoving equipment in the UK.

Beam decks are the choice for hauling some of the larger quarry trucks and large wheeled loaders and excavators as the load can sit closer to road surface reducing the overall height of the vehicle.

ascroft transportAscroft Transport based in Tarleton near Preston are the preferred haulage contractor for the UK Cat-erpillar dealers, Finning.

Boasting a very well turned out fleet of high specification vehicles, the company have vehicles in their own livery as well as that of their client.

Vehicle choice is pretty simple with Scania being the preferred vehicle of choice for the top weight 6x4 tractors while further down the weight range Volvo, DAF and Scania vehicles have featured over the past few years.

Trailer choice is also an important part of running a profitable heavy haulage company and Ascroft run a predominately Broshuis fleet with three and four axle step-frames and multi-axle low-loaders featur-ing heavily with a number of Nooteboom low-loaders also present on the trailer park.

Capable of grossing 150 tonnes some of the Ascroft fleet are more than capable of undertaking any haulage task for Finning and can be regularly seen hauling some of the largest Caterpillar earthmoving equipment in the UK.

Beam decks are the choice for hauling some of the larger quarry trucks and large wheeled loaders and excavators as the load can sit closer to road surface reducing the overall height of the vehicle.

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

DCM

powerdaySituated along the banks of the Grand Union Canal in North London is Powerday, the largest recycling company in the UK. The family owned company’s head office and recycling facility are ideally situated a mere 5 miles from Oxford Street enabling the company to access waste from one of the most densely populated cities in the Western World.

Operating from their 9 acre state of the art facility in Willesden Junction the Company, headed by Chairman Mick Crossan, is proud to boast a 100% recycling record for all the material brought into their facility. Holding a license to process up to 1.6 million tonnes of waste, Powerday currently receive around 800,000 tonnes of household, office, construction and demolition waste into the facility. Top quality service is a major requirement for Powerday when it comes to their equipment fleet. If the plant is unavailable the whole process of recycling cannot commence.

Working alongside three 329D and M322D excavators are three 966H wheel loaders. Used as general workhorses around the site the 966H are used for cleaning around the stockpiles, loading the daily trains and general truck loading. The 25 tonne loaders and are seen as a more capable loader than their IT62 predecessors. As with the excavators, the operator is looked after with a large comfortable cab fitted with the standard air suspended seat and are all fitted with the more traditional steering wheel set up. As for the attachments, 2 of the machines are fitted with standard general purpose buckets whilst the third has a high tip option. Processing over 800,000 tonnes of material per year and operating 24 hours a day calls for maximum availability from the fleet of Caterpillar machinery

powerdaySituated along the banks of the Grand Union Canal in North London is Powerday, the largest recycling company in the UK. The family owned company’s head office and recycling facility are ideally situated a mere 5 miles from Oxford Street enabling the company to access waste from one of the most densely populated cities in the Western World.

Operating from their 9 acre state of the art facility in Willesden Junction the Company, headed by Chairman Mick Crossan, is proud to boast a 100% recycling record for all the material brought into their facility. Holding a license to process up to 1.6 million tonnes of waste, Powerday currently receive around 800,000 tonnes of household, office, construction and demolition waste into the facility. Top quality service is a major requirement for Powerday when it comes to their equipment fleet. If the plant is unavailable the whole process of recycling cannot commence.

Working alongside three 329D and M322D excavators are three 966H wheel loaders. Used as general workhorses around the site the 966H are used for cleaning around the stockpiles, loading the daily trains and general truck loading. The 25 tonne loaders and are seen as a more capable loader than their IT62 predecessors. As with the excavators, the operator is looked after with a large comfortable cab fitted with the standard air suspended seat and are all fitted with the more traditional steering wheel set up. As for the attachments, 2 of the machines are fitted with standard general purpose buckets whilst the third has a high tip option. Processing over 800,000 tonnes of material per year and operating 24 hours a day calls for maximum availability from the fleet of Caterpillar machinery

European Attachments Group Ltd Saxon Works, South Street, Openshaw, Manchester, M11 2FY

Tel: 0845 4745670 Sales: 0845 4745670 Email: sales@siteshield360.com Web: www.siteshield360.com

MONITOR - DETECT - PROTECTRemote Boundary Monitoring of Dust, Noise and Meteorological Parameters

Applications- Demolition Phase Monitoring - Monitoring entertainment noise - Petrochem and VOC monitoring- General Compliance monitor - Site monitoring strategies - Waste Transfer Stations - Section 61 compliance - PPG24 compliance - Construction Sites

Key Features- Fully integratable with Emicontrols dust control turbine range - Fully Automatic Monitor, Detect, Protect control package - Email and text alarms for exceeded dust and noise levels - Dedicated web hosted data with secure private login- Maintenance free wind speed and direction sensor - Real time dust (PM10, PM2.5 TSP) and noise levels - IEC61672-1 Compliant Sound Level Meter - Proven dust measurement technology - Heated Inlet to remove moisture

SITE SHEILD.indd 1 07/08/2014 15:59

Experience theProgress.

A brand new maintenance concept which improves productivity

A modern and spacious cab which allows the operator to work in unrivalled comfort

A versatile tool holder for quick and efficient work under all circumstances

The new crawler excavator R 924 meets new phase IIIB engine emissions standards.

The Group

Liebherr-Great Britain Ltd.Normandy Lane, Stratton Business ParkBiggleswade, SG18 8QBPhone: 01767 60 2100E-mail: info.lgb@liebherr.comwww.facebook.com/LiebherrConstructionwww.liebherr.co.uk

2037-502_020 LFR_102_R924_EM_GB-01.indd 1 17.05.13 11:06

DCMDEMOLITIONCONSTRUCTIONMOVING

www.rpadesignandmedia.co.uk