8
c DAkkS Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11086-01-00 according to DIN EN ISO/IEC 17025:2005 period ofvalidity: 05.08.2015 to 04.08.2020 Certificate Holder: Dateofissue: 05.08.2015 IFO - Institut für Oberflächentechnik GmbH Alexander-von-Humboldt-Straße 19, 73529 Schwäbisch Gmünd Tests in the fields: Testing of coatings or metal and plastic surfaces against corrosion, climatic or environmental impact and other contamination factors; Corrosion analyses, including chemicat, physico-chemical tests on metallic and non-metallic coatings and structural elements äs well äs metallic and plastic surfaces and coatings; Testing of mechanical properties of coatings; Testing of performance properties of coatings with selected non-destructive testing Abbreviations used : please referto the last page The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use Standards or equivalent testing methods listed here with different issue dates. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/8

Deutsche Akkreditierungsstelle GmbH · Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH ... Qualicoat Quality community of organic coatings of aluminium structural

Embed Size (px)

Citation preview

Page 1: Deutsche Akkreditierungsstelle GmbH · Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH ... Qualicoat Quality community of organic coatings of aluminium structural

cDAkkSDeutscheAkkreditierungsstelle

Deutsche Akkreditierungsstelle GmbH

Annex to the Accreditation Certificate D-PL-11086-01-00

according to DIN EN ISO/IEC 17025:2005

period ofvalidity: 05.08.2015 to 04.08.2020

Certificate Holder:

Dateofissue: 05.08.2015

IFO - Institut für Oberflächentechnik GmbH

Alexander-von-Humboldt-Straße 19, 73529 Schwäbisch Gmünd

Tests in the fields:

Testing of coatings or metal and plastic surfaces against corrosion, climatic or environmentalimpact and other contamination factors;

Corrosion analyses, including chemicat, physico-chemical tests on metallic and non-metalliccoatings and structural elements äs well äs metallic and plastic surfaces and coatings;

Testing of mechanical properties of coatings;

Testing of performance properties of coatings with selected non-destructive testing

Abbreviations used : please referto the last page

The testing laboratory is permitted, without being required to inform and obtain prior approvalfrom DAkkS, to use Standards or equivalent testing methods listed here with different issue dates.

This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/8

Page 2: Deutsche Akkreditierungsstelle GmbH · Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH ... Qualicoat Quality community of organic coatings of aluminium structural

cAnnex to accredltation certificate D-PL-11086-01-00

DAkkSDeutscheAkkreditierungsstelle

l. Chemical and physico tests testing on coatings and corrossion

DINEN ISO 36132011-04

DIN EN 152052007-02

HausmethodeOB

2009-11

DIN EN ISO 105232012-04

Metallic and other inorganic coatings - Chromate conversioncoatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods

Determination of hexavalent chromium in corrosion protectionlayers - Qualitative analysis (withdrawn Standard)

Residual soiling for particle greater 150 \i m in metalliccomponents

Determination of pH

DIN 38404-41976-12

Determination ofTemperature (C 4)

DIN EN 278881993-11

Water quality; determination of electrical conductivity

DIN EN 12373-41999-04

ISO 21432010-07DIN EN ISO 21432010-12

Aluminium and aluminium alloys - Anodizing - Part 4: Estimation ofloss of absorptive power of anodic oxidation coatings after sealingby dye Spot test with prior acid treatment (withdrawn Standard)

Anodizing of aluminium and its alloys - Estimation of loss ofabsorptive power of anodic oxidation coatings after sealing - Dye-Spot test with prior acid treatment

DIN EN 12373-72002-11

DIN EN ISO 32102010-12

Aluminium and aluminium alloys - Anodizing - Part 7: Assessmentof quality of sealed anodic oxidation coatings by measurement ofthe loss of mass after immersion in phosphoric acid/chromic acidsolution with prior acid treatment (withdrawn Standard)

Anodizing of aluminium and its alloys - Assessment of quality ofsealed anodic oxidation coatings by measurement of the loss ofmass after immersion in phosphoric acid/chromic acid solution

Perlod ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015

-Transtation - 2/8

Page 3: Deutsche Akkreditierungsstelle GmbH · Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH ... Qualicoat Quality community of organic coatings of aluminium structural

cAnnextoaccreditation certificate D-PL-11086-01-00

DAkkSDeutscheAkkreditierungsstelle

2. Testing of mechanical properties of coatings

2.1 Mechanical properties in air

2.1.1 mechanical and physical testing of deformation behaviour and failure limits ofaluminium and steel coatings in air

DIN EN ISO 15192011-04

Paints and varnishes - Bend test (cylindrical mandrel)

DIN EN ISO 15202002-04

Paints and varnishes - Cupping test (withdrawn Standard)

DIN EN ISO 15202007-11

Paints and varnishes - Cupping test

DIN EN ISO 24091994-10

Paints and varnishes - Cross-cut test (withdrawn Standard)

DIN EN ISO 24092013-06

Paints and varnishes - Cross-cut test

DIN EN ISO 6272-22011-11

DIN EN ISO 28152003-10

Paints and varnishes - Rapid-deformation (impact resistance)tests - Part 2: Falling-weight test, small-area indenter

Paints and varnishes - Buchholz indentation test

RAL-GZ 6322011-08

Applicable test guidelineClause 1-3.2

Cleaning and protection - Fa^ade and monument - Qualityassurance

ASTM D 27942010

BS 6161Part 181991-12

Standard Test Method for Resistance of Organic Coatings to theEffects of Rapid Deformation (Impact)

Methods of test for anodic oxidation coatings on aluminium andits alloys. Determination ofsurface abrasion resistance

GSBAL6312013-05Part VII Clause 10

International high-class directive for the component coating ofaluminium - behaviour compared with drilling and milling

Period ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015

-Translation - 3/8

Page 4: Deutsche Akkreditierungsstelle GmbH · Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH ... Qualicoat Quality community of organic coatings of aluminium structural

Annex to accreditation certiflcate D-PL-11086-01-00

DAkkSDeutscheAkkreditierungsstelle

Qualicoat

2015-01Clause 2.18

Sawing, milling and drilling / regulation for determining theadhesion strength of an organic coating during mechanicalprocessing

2.2. Mechanical properties in media

2.2.1 mechanical testing of properties

GSB ST 6632013-05Part VII Clause 8.2

Crosslinking test / polymerization test / wiping testInternational quality guideline for component coatings made ofsteel

GSBAL6312013-05Part VII Clause 8.2

Cross-linking test / Polymerization lest / Wiping testInternational quality guideline for component coatings made ofaluminium

QIB2013-03Clause2.10

Cross-linking test - Test for the determination of the degree ofcuring of liquid paints

Qualicoat

2015-01Clause2.14

Cross-linkingtest

GSBAL6312013-05PartVIICIauselS

Resistance to boiling water / Cooking testInternational quality guideline for the component coating made ofaluminium

QIB 2013-03Clause 2.12

Cooking test to check the pre-treatment

Qualicoat

2015-01Clause2.16

Resistance to boiling water / cooking test

Period ofvalidity: OS.08.2015 to 04.08.2020Dateofissue: 05.08.2015

- Translation - 4/8

Page 5: Deutsche Akkreditierungsstelle GmbH · Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH ... Qualicoat Quality community of organic coatings of aluminium structural

Annex to accreditation certificate D-PL-11086-01-00

[(.DAkkSDeutscheAkkreditierungsstelle

2.2.2 Testing of optical properties /colour fastness

DI N 11664-42012-06

Colorimetry - Part 4: CIE 1976 L*a*b* Colour space

DINEN ISO 28132015-02

Reflectometer äs a means for gloss assessment of plane surfaces ofpaint coatings and plastics

DINEN ISO 28131999-06

ISO 7724-21984-10

Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85" (withdrawn Standard)

Paints and varnishes; Colorimetry; Part 2 : Colour measurement(withdrawn Standard)

2.3. Testing of media resistance due to aging, climatic and environmental impact äs well äsother contamination factors on laminated aluminium and steel and galvanic coatings

DINEN ISO 6270-22005-09

DIN 500171982-10

Paints and varnishes - Determination of resistance to humidityPart 2: Procedure for exposing test specimens in condensation-wateratmospheres

Condensation water test atmospheres (withdrawn Standard)

DINEN ISO 92272012-09

Corrosion tests in artificial atmospheres - Salt spray tests

DIN 500211988-06

Spray tests with different sodium chloride solutions (withdrawnStandard)

DIN EN ISO 6988

1997-03

Metallic and other non-organic coatings - Sulphur dioxide test withgeneral condensation of moisture

DINEN ISO 3231

1998-02

Paints and varnishes - Determination of resistance to humid

atmospheres containing sulphur dioxide

DIN 50018

2013-05

Testing in a saturated atmosphere in the presence ofsulphurdioxide

DIN EN ISO 72532002-04

Paints and varnishes - Determination of resistance to neutral salt

spray (fog) (withdrawn Standard)

Period ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015

-Translation- 5/8

Page 6: Deutsche Akkreditierungsstelle GmbH · Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH ... Qualicoat Quality community of organic coatings of aluminium structural

.<^DAkkS

Annex to accred itation certificate D-PL-11086-01-00

DeutscheAkkreditierungsstelle

RAL-GZ 6322011-08

Applicable test guidelineClause 1-3.4

Cleaning of metal facades- alternative immersion test (Testing ofcleaning agents for cleaning metal facades)

RAL-GZ 6322011-08

Applicable test guidelineClause 1-3.5

Cleaning of metal facades - cotton ball test (Testing of cleaningagents for cleaning metal facades)

RAL-GZ 6322011-08

Applicable test guidelineClause 1-3.3

Cleaning of metal facades - immersion test (Testing of cleaningagents for cleaning metal facades)

GSBAL6312013-05PartVIICIauselS

International quality guideline for component coating made ofaluminium - resistance to mortar

GSB ST 6632013-05PartVIICIauselS

International quality guideline for component coatings made ofsteel - resistance to mortar

QIB2013-03Clause2.11

Resistance to mortar

Qualicoat

2013-05Clause 2.15

Resistance to mortar

DIN EN ISO 105-B022014-11

DIN EN ISO 16474-22013-03

QIB2013-03Clause2.9

Tests for colour fastness - Part B02: Colour fastness to artificial

light: Xenon arc fading lamp test

Paints and varnishes - Methods of exposure to laboratory lightsources - Part 2: Xenon-arc lamps

Machu test (short-term corrosion test for aluminium, steel andgalvanized steel)

Qualicoat

2015-01Clause2.11

Machu test (short-term corrosion lest, only on profile pieces)

Period ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015

-Translation - 6/8

Page 7: Deutsche Akkreditierungsstelle GmbH · Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH ... Qualicoat Quality community of organic coatings of aluminium structural

.^=^DAkkS

Annex to accreditation certificate D-PL-11086-01-00

DeutscheAkkredltierungsstelle

DINEN ISO 29312010-12

ISO 29312010-07

Anodizing of aluminium and its alloys - Assessment of quality ofsealed anodic oxidation coatings by measurement of admittance

Anodizing of aluminium and its alloys - Assessment of quality ofsealed anodic oxidation coatings by measurement of admittance

Caterpillar Specifications1E2732 (2010-01)1E4093 (2012-12)

Laboratory Cyclic Corrosion Test according to SÄE J 2334 (2003-12)- resistance against fluids (MG1004-151)

3. Testing of performance properties of coatings or metallic, plastic surfaces with selectednon-destructive testing

ISO 21772003-03

Hausmethode 02

2008-07

Metallic coatings - Measurement of coating thickness - Coulometricmethod by anodic dissolution

Materialography - General Joint Preparation / Coating ThicknessDetermination

DINEN ISO 21781995-04

DIN EN ISO 23602004-04

Hausmethode 01

2004-12

Non-magnetic coatings an magnetic Substrates - Measurement ofcoating thickness - Magnetic method (withdrawn Standard)

Non-conductive coatings on non-magnetic electrically conductivebasis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method

Conductance measurement: The process is used to differentiatealuminium alloys by different conductivities

Abbreviations used:

ASTM American SocietyforTesting and MaterialsBS British Standard

Caterpillar Published test guidance on coatings of U.S. American Company Caterpillar Inc.Specifications Manufacturerofconstruction machineryDIN German Institut ofstandardisation

EN European StandardISO International Organization for StandardizationGSB ST Quality community of coatings of steel structural elementsQualicoat Quality community of organic coatings of aluminium structural elements in

Architecture

Period ofvalidity: 05.08.2015 to 04.08.2020Dateofissue: 05.08.2015

-Translation - 7/8

Page 8: Deutsche Akkreditierungsstelle GmbH · Deutsche Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH ... Qualicoat Quality community of organic coatings of aluminium structural

Annex to accreditation certificate D-PL-11086-01-00

DAkkS/ Deutsche

Akkreditierungsstelle

QIB Quality communitv Industrial coating

Hausmethode In-house test method of ifo - Institut für Oberflächentechnik GmbH

RAL-GZ RAL-QualityLabelSÄE Standard from ANSI - American National Standards Institute

Period ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015

-Translation - 8/8