ICS 23.040.01; 91.140.80
Kunststoff-Rohrleitungssysteme zum Ableiten von
Abwasser(niedriger und hoher Temperatur) innerhalb der
Gebudestruktur Weichmacherfreies Polyvinylchlorid (PVC-U) Teil 1:
Anforderungenan Rohre, Formstcke und das Rohrleitungssystem
Ref. No. DIN EN 1329-1 : 1999-12English price group 14 Sales No.
1114
05.00
DEUTSCHE NORM December 1999
EN 1329-1{
EN comprises 34 pages.
No part of this standard may be reproduced without the prior
permission ofDIN Deutsches Institut fr Normung e.V., Berlin.Beuth
Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for
German Standards (DIN-Normen).
Plastics piping systems for soil and waste discharge (lowand
high temperature) within the building structure
Unplasticized poly(vinyl chloride) (PVC-U)Part 1: Specifications
for pipes, fittings and the system
English version of DIN EN 1329-1
European Standard EN 1329-1 : 1999 has the status of a DIN
Standard.
A comma is used as the decimal marker.
National forewordThis standard has been prepared by CEN/TC
155.The responsible German body involved in its preparation was the
Normenausschu Wasserwesen (WaterPractice Standards Committee),
Technical Committee Kunststoffrohre in der Abwassertechnik.It
should be noted that for a period ending 31 January 2001 DIN 19531
continues to be valid in Germany.During this period poly(vinyl
chloride) pipes for use inside buildings may be manufactured to
conform eitherto DIN 19531 or to the present standard, in
conjunction with DIN 19531-10.DIN EN ISO 1043-1*) and DIN 53479 are
the standards corresponding to International Standards ISO
1043-1and ISO 1183, respectively, referred to in clause 2 of the
EN.
AmendmentsDIN 19531, November 1987 edition, has been superseded
by the specifications of EN 1329-1.
Previous editionsDIN 19531: 1964-09, 1968-01, 1977-03, 1980-03,
1987-11.
National Annex NAStandard referred to(and not included in
Normative references and Annex B)DIN 53479 Determination of density
of plastics and elastomers
*) At present at draft stage.
This standard, togetherwith DIN 19531-10,December 1999
edition,supersedes DIN 19531,November 1987 edition.
English version
ICS 23.040.01; 91.140.80
Plastics piping systems for soil and waste discharge(low and
high temperature) within the building
structure Unplasticized poly(vinyl chloride) (PVC-U)Part 1:
Specifications for pipes, fittings and the system
Systmes de canalisations enplastique pour lvacuation des
eaux-vannes et des eaux uses ( basse et haute temprature) lintrieur
dela structure des btiments Poly(chlorure de vinyle) non
plastifi(PVC-U) Partie 1: Spcificationspour tubes, raccords et le
systme
Kunststoff-Rohrleitungssysteme zumAbleiten von Abwasser
(niedriger undhoher Temperatur) innerhalb derGebudestruktur
WeichmacherfreiesPolyvinylchlorid (PVC-U) Teil 1:Anforderungen an
Rohre, Formstckeund das Rohrleitungssystem
This European Standard was approved by CEN on 1998-11-01.CEN
members are bound to comply with the CEN/CENELEC Internal
Regulationswhich stipulate the conditions for giving this European
Standard the status of anational standard without any
alteration.Up-to-date lists and bibliographical references
concerning such national stand-ards may be obtained on application
to the Central Secretariat or to any CENmember.The European
Standards exist in three official versions (English, French,
German).A version in any other language made by translation under
the responsibility of aCEN member into its own language and
notified to the Central Secretariat has thesame status as the
official versions.CEN members are the national standards bodies of
Austria, Belgium, the CzechRepublic, Denmark, Finland, France,
Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the
United Kingdom.
EN 1329-1
January 1999
Central Secretariat: rue de Stassart 36, B-1050 Brussels
European Committee for StandardizationComit Europen de
NormalisationEuropisches Komitee fr Normung
1999. CEN All rights of exploitation in any form and by any
meansreserved worldwide for CEN national members.
Ref. No. EN 1329-1 : 1999 E
![Unplasticized polyvinyl chloride [uPVC] Facts](https://img.pdfslide.net/doc/110x75/56812ba2550346895d8fceab/unplasticized-polyvinyl-chloride-upvc-facts.jpg)
