DIN EN ISO 9001:2008DIN EN ISO 14001:2009

©TIBO Tiefbohrtechnik GmbH www.tibo.com info@tibo.com

Gundrilling machines SoliddrillinguptoØ80mm CounterboringuptoØ100mm Drilldepthupto4.500mm

BTA/STS-deep hole drilling machines SoliddrillinguptoØ250mm CounterboringuptoØ500mm Drilldepthupto8.000mm

12-spindle gundrilling machine for camshafts with automatic loading conveyor

B125-6000 andB160-6000 at stage of final assembly

www.tibo.com info@tibo.com

Advantages:• max. torque at low speed (see table)• the size of the spindle heads according to the customer (replaceable)• programmable chip breaking (e.g. at Inconel)• drill tube change possible to the back side through the drill spindle• adjustable backlash measurement in gearbox• at drilling operation the feed spindle is on tension• chip discharge with wear part• protection of mechanical heading at feed axis, to make sure that the forces will be eliminated free of torsion at an accidentally overriding• failure position approachable by rapid traverse• hydraulic operated coolant pressure head (BOZA) slide (stroke 250 mm) can be moved in the whole range between tailstock and drill slide (B250-8m: Workpiece length 10.000 mm, max. drill depth 6.000 mm from one side or rather 10.000 mm from both sides)• spindle supports can be dismantled for maintenance without dismantling the feed spindle• worldwide the best BOZA (coolant pressure head): •big drill range with one BOZA size (see table) •drill bush elastically adjustable, conversion kit for front sealing disc and jaw chuck are standard •non rotating drill bush for the least possible deviation (run out)• device plates for cubic workpieces• very good cost-performance ratio• short delivery times as all components are kept in stock

BTA/STS-deep hole drilling machinesSolid drilling up to Ø 250 mmCounter boring up to Ø 500 mmDrill depth up to 8.000 mm

System BTA/STS B80 B125 B160 B250

Torque (Nm) 600 at n = 140-1 2.000 at n = 180-1 4.500 at n = 80-1 7.500 at n = 90-1

Swing-Ø (mm) 500 630 630 825

Solid drilling (mm) 80 125 160 250

Tool-Ø max. (mm) 100 200/250 250 400/500

Drill depth max. (mm) 4.000 8.000 8.000 8.000

Feed force (N) 30.000 50.000 60.000 80.000

Spindle head (Size) 6 8 (11) 11 (15) 11 (15)

BOZA retainer-Ø (mm) 180/230 300/355 355/490 490/600

Workpiece steady Ø (mm) 40 - 320 50 - 500 50 - 500 260 - 710

Remarks option: conversion-Kit for gundrilling

Many different tool and workpiece spindle headstocks are available: Standard, high speed, Inconel,

Universal and several gear stages.

All BTA/STS - deep hole drilling machines are also available with following technologies:Trepanning / Skiving / Roller Burnishing / Pullboring / Bottle Boring.

Oil pressure heads (BOZA)size drill range reception Ø500 100,00 - 500,00 600

400 100,00 - 400,00 490

250 50,00 - 250,00 355

200 50,00 - 200,00 300

100 25,00 - 100,00 180

50 12,50 - 50,00 140

© ECOROLL AG

TIBO Tiefbohrtechnik GmbH • D-72805 Lichtenstein-UnterhausenPhone: +49(0)7129 - 9260-0 • Fax: +49(0)7129 - 9260-99

www.tibo.com info@tibo.com

TiefbohrmaschinenDeep hole drilling machines

The simple and brilliant modular concept of the single- and multispindle deep hole drilling machines is defined by an array of 10 spindle and drive sizes and 10 different drill depths. A state of the art machine concept with linear guideways offers almost unlimited configurations, from a universal standard machine to part specific special machine. TIBO‘s 45 years experience in deep hole drilling as well as a

multitude of enhanced details provide for significantly simplified handling, lower set-up costs at extended machining options. So the movable drill bush support allows machining of extra-long workpieces. The use of Siemens spindle and feed motors with high torque in combination with the generous mechanical dimensioning allows the usage of the latest tooling.All components on stock - short delivery times!

Single and multispindle deep hole drilling machines Type E08, E12, E15, E25, E30, E40, E80

Gundrilling machines Solid drilling up to Ø 80 mm Counter boring up to Ø 100 mm Drill depth up to 4.500 mm

1-spindle

0,6-82-122-153-255-305-42

10-80

2-spindles

0,6-82-122-153-255-305-40

3-spindles

0,6-82-122-153-255-30

4-spindles

0,6-82-122-153-25

6-spindles

2-122-15

Type

E08E12E15E25E30E40E80

Solid

dri

ll-Ø

in m

m

Movable drill bush supportThe drill bush support or pressure head carriage of each machine can be moved 1/3 in direction of the drill spindle. This allows reception of longer workpieces which can then be drilled with a reduced drill depth or from both sides. Doing so e.g. on a machine with drill depth 1.500 mm, workpieces with a total length of 2.000 mm can be drilled with a depth of 1.000 mm from one side - or 2.000 mm from both sides.

www.tibo.com info@tibo.com

Drill depthChoose from 10 different drill depths:375, 750, 1.000, 1.500, 2.000, 2.250, 3.000, 3.750, 4.000, 4.500 mm.

Machine doorsThe widely opening machine doors allow loading of workpieces by crane as well as a simplified maintenance and set-up.

Perfect fit for your workpiecesIn order to reduce the drift of the drill, a counter rotating clamping tailstock can be mounted on the machine. Or a stationary tailstock, a cross table movable in the x-axis e.g. for plates, a hydraulically landing mounting plate for the reception of your workpiece fixture, a cross carriage for excentrical drills or a rotary table.

Tool steadiesThe intermeshing tool steadies minimize the loss of drill travel way. Unused tool steadies can easily be detached from the linear guideways, thus reducing the loss of travel way to zero. Also they can be re-inserted quickly if necessary.

The coolant systemThe combination of a digital controlled high pressure coolant pump together with an automated filter system and a chip disposal according to customers preference guarantees permananet perfect drill results.

One deep hole drilling construction kit with thousands of individual solutions!

TIBO Tiefbohrtechnik GmbH • D-72805 Lichtenstein-UnterhausenPhone: +49(0)7129 - 9260-0 • Fax: +49(0)7129 - 9260-99

www.tibo.com info@tibo.com

TiefbohrmaschinenDeep hole drilling machines

1 order, 3 machines, 12 specialists, 36 spindles and delivery time of only 5 months.

3 gundrilling machines type E15-6-750 TU at stage of final assembly.

Modern control solutions

Electrical Control With the assortment of machine controls TIBO sets the focus on latest technology. In addition to the NC-controls Siemens Touchpanel TP-177, KTP-600 and Multipanel KTP-1000 the customer can choose from the Siemens CNC-controls 802D sl and 840D sl. Siemens high performance spindle motors and feed drives provide infinitely variable spindle speeds and drill feeds for the entire working range of the machine at a high torque.

The advantages in detail• Programmed chip breaking while processing difficult materials such as Inconel• Multilingual operation possible• Transfer of digital working data by computer interface (USB/Ethernet)• By Operator guidance and fault diagnostic setup and idle time will be reduced and quality will be optimized• Spindle speed change, feed change and coolant adjustment are infinitely variable adjustable via input at the touchpanel with override during the drill cycle• Programmable coolant amount, min. and max. coolant pressure can be set and monitored in the control• Remote maintenance and diagnostic of the software via data line (as an option)

840D sl KTP-1000TP 177

TP KTP-600

Operator Screens Siemens Touch Panel KTP-1000 Color

2the second life made by TIBO

The second life of deep hole drilling machinesRetrofit electrically and mechanically at TIBO or on your site (worldwide)

Equipment:

Retrofit of a special cross table deep hole drilling machine

Spindle blocks, Boring units, drill bushes, drill bush holders, clamping cones, oil pressure heads, gundrill grinding machines, deep hole drilling oil and much more in stock

Overhauling of a B3SN Heidenreich & Harbeck VDF

Retrofit of a Hegenscheidt BRS-D

TIBO deep hole drilling unit on a Skoda-center for drilling heat exchanger blocks

New TIBO Boring headstock on a TBT T120-2000

New TIBO Boring headstock on a Böhringer B630

Köln

Berlin

Hamburg

Stuttgart

Frankfurt

München

Hannover

Dresden

/

Stuttgart

KarlsruhePforzheim

Heilbronn

Waiblingen

Singen

Hechingen

Esslingen

Airport

Göppingen

Nürtingen

MetzingenUlm

Würzburg

MannheimFrankfurt

Basel

ReutlingenBad Urach

Tübingen

Rottenburg

Herrenberg

Wendlingen

Plochingen

Pfullingen

Dettingen

Laichingen

Blaubeuren

Merklingen

Gaislingen

Engstingen

Riedlingen

EhingenKempten

Böblingen

Sindelfingen

➛

➛

München➛

➛

➛

➛

➛

➛

➛

➛

➛

Q

➛ from Karlsruhe Exit 52 Reutlingen Tübingen

from München Exit 52 Reutlingen Tübingen ➛

Lichtenstein-Unterhausen

UnterhausenLichtenstein-

TIBO in the BSU business park

Wilhelmstraße 160D-72805 Lichtenstein-Unterhausen

Phone: 0049(0)7129 – 92600Fax: 0049(0)7129 – 926099

DIN EN ISO 9001:2008DIN EN ISO 14001:2009

TIBO Tiefbohrtechnik GmbH

TIBO

EM

O 2

013_

de

Invitation

©TIBO Tiefbohrtechnik GmbH www.tibo.com info@tibo.com

We would like to invite you to visit our facility to see by yourself how TIBO works. Discuss your requirements and eventual manufacturing problems with our engineering and maintenance personal.We are confident that TIBO will have the answer and solution to your questions. Our company philosophy is based on quality, service and good customer relations. Therefore it is our goal to provide projects to the highest quality based on our customer requirement´s.

Points of contacts in 30 countries

• Oil and gas sector• Medical branches

• Aerospace• Automotive and vehicle

• Hydraulics and pneumatics • Renewable energies

• Mechanical engineering • Shipbuilding

Applications:

7000 sqm assembly hall and showroom with constantly many second-hand deep hole borers on stock