of 6 /6
SAMSUNG Proprietary-Contents may change without notice 11. Disassembly and Assembly Instructions 11-1 This Document can not be used without Samsung's authorization 11-1. Disassembly 1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage! Remove screw at 4 points (torque:1.0~1.2) 1 2 Disjoint the Rear case from the lower part 3 Disassemble volume key from PBA Disassemble the top of the front (4point) 4 1 2 3

Disassemble and assembly of Samsung GT-C3010S

Embed Size (px)

DESCRIPTION

Learn how to disassemble and re assemble a Samsung GT-C3010S mobile for cleaning and repairs. It is a very comprehensive guide to do the job.

Citation preview

Page 1: Disassemble and assembly of Samsung GT-C3010S

SAMSUNG Proprietary-Contents may change without notice

11. Disassembly and Assembly Instructions

11-1

This Document can not be used without Samsung's authorization

11-1. Disassembly

1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!

1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!

Remove screw at 4 points (torque:1.0~1.2)1 2 Disjoint the Rear case from the lower part

3 Disassemble volume key from PBA Disassemble the top of the front (4point)4

1

2

3

Page 2: Disassemble and assembly of Samsung GT-C3010S

SAMSUNG Proprietary-Contents may change without notice

Exploded View and Parts List

11-2

This Document can not be used without Samsung's authorization

1) Be careful not to make scratch and molding damage!

2) Be careful not to make damage to SIDE KEY FPCB !

3) Be careful not to make damage to LCD FPCB !

1) Be careful not to make scratch and molding damage!

1) Be careful not to make scratch and molding damage!1) Be careful not to make scratch and molding damage!

2) Be careful not to make damage to key FPCB !

5 Disassemble PBA and front cover(1) Disassemble PBA and front cover(2)6

7 Disassembled PBA and front cover(3) 8 Remove screws at 3 points((torque:1.0~1.2)

and disassemble key FPCB

Page 3: Disassemble and assembly of Samsung GT-C3010S

SAMSUNG Proprietary-Contents may change without notice

Exploded View and Parts List

11-3

This Document can not be used without Samsung's authorization

1) Be careful not to make scratch and molding damage!

2) Be careful not to make damage to camera FPCB !

1) Be careful not to make scratch and molding damage!

2) Be careful not to make damage to motor wire !

1) Be careful not to make scratch and molding damage!

2) Be careful not to make damage to speaker FPCB !

9 Disassemble the Camera by lifting the bottom

of Camera

Disassemble the Motor by lifting the bottom of

Motor

10

11 Disassemble Speaker from PBA

Page 4: Disassemble and assembly of Samsung GT-C3010S

SAMSUNG Proprietary-Contents may change without notice

Exploded View and Parts List

11-4

This Document can not be used without Samsung's authorization

1) Be careful not to make scratch and molding damage!

2) Be careful not to make damage to side key FPCB !

3) Be careful not to make damage to motor wire !

1) Be careful not to make scratch and molding damage!

2) Be careful not to make damage to speaker FPCB !

1) Be careful not to make scratch and molding damage!1) Be careful not to make scratch and molding damage!

2) Beware that you do not damage camera F-PCB.

11-2. Assembly

1 2Solder the side key FPCB and Vibration Motor Solder the Speaker FPCB

3 1) Put Bond on the Motor Solder pad

2) Turn the Motor and Put the Motor in Motor

Bracket

(Remove a release paper.)

Remove a

release paper.

4 1) Insert camera FPCB depending on silk line.

2) Insert camera in speaker bracket.

(Remove a release paper.)

Remove a

release paper.

Page 5: Disassemble and assembly of Samsung GT-C3010S

SAMSUNG Proprietary-Contents may change without notice

Exploded View and Parts List

11-5

This Document can not be used without Samsung's authorization

1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!

1) Be careful not to make scratch and molding damage!

2) Be careful not to make damage on Side key FPCB!

(in the red box)

1) Be careful not to make scratch and molding damage!

2) Beware that you do not damage LCD F-PCB.

5 1) Drivers 3 screws on the PBA (torque:1.0~1.2)

2) Insert FPCB of KEY to main PBA. Make

sure that FPCB is completely inserted.

6 1) Check the attached status of keypad on

the front cover

7 Put the PBA on the FRONT part 8 Insert FPCB of LCD to main PBA. Make sure

that FPCB is completely inserted.

Page 6: Disassemble and assembly of Samsung GT-C3010S

SAMSUNG Proprietary-Contents may change without notice

Exploded View and Parts List

11-6

This Document can not be used without Samsung's authorization

1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!

8 Put the Side key FPCB on the FRONT

then Put the Side Key on the FRONT

10 Combine the REAR with FRONT

from the upper hook to lower hook

(the direction of Red arrow)

10 Drivers 4 screws on the rear (torque:1.0~1.2)