7
Disassembling Axis 214 PTZ Camera (English/Slovenščina) How to disassemble Axis 214 PTZ camera. Written By: lukahlastec Disassembling Axis 214 PTZ Camera (English/Slovenščina) Draft: 2019-07-23 Guide ID: 28824 - This document was generated on 2019-09-20 12:55:31 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 7

Disassembling Axis 214 PTZ Camera (English/Slovenščina) · 2019-09-20 · Disassembling Axis 214 PTZ Camera (English/Slovenščina) How to disassemble Axis 214 PTZ camera. Written

  • Upload
    others

  • View
    21

  • Download
    0

Embed Size (px)

Citation preview

Disassembling Axis 214 PTZ Camera(English/Slovenščina)

How to disassemble Axis 214 PTZ camera.

Written By: lukahlastec

Disassembling Axis 214 PTZ Camera (English/Slovenščina) Draft: 2019-07-23Guide ID: 28824 -

This document was generated on 2019-09-20 12:55:31 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 7

INTRODUCTION

How to disassemble Axis 214 PTZ camera.

TOOLS:Pro Tech Toolkit (1)

Disassembling Axis 214 PTZ Camera (English/Slovenščina) Draft: 2019-07-23Guide ID: 28824 -

This document was generated on 2019-09-20 12:55:31 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 7

Step 1 — Disassembling Axis 214 PTZ Camera (English/Slovenščina)

4 screws

Step 2

7 screws

Disassembling Axis 214 PTZ Camera (English/Slovenščina) Draft: 2019-07-23Guide ID: 28824 -

This document was generated on 2019-09-20 12:55:31 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 7

Step 3

Remove (4) Phillips screws.

Carefully disconnect the ribbon connector.

Odklopi konektor.

Step 4

Remove (4) Phillips screws. 4 screws, težko odšraufati

If replacing the logic board, remove (2) cables at the connectors. Odključi priključke (označi katerije kateri !

At the underside of the logic board, disconnect the connector. Izključi konektor (na kontektorju sospredaj številke)

Disassembling Axis 214 PTZ Camera (English/Slovenščina) Draft: 2019-07-23Guide ID: 28824 -

This document was generated on 2019-09-20 12:55:31 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 7

Step 5

Gently press back the plastic clip at both sides. Izključi plastični zatič na obeh straneh

Remove 2 screws. 2 šraufa.

Remove (3) Phillip screws. 3 šraufi (2+1)

Step 6 — Odključitev heada

Remove (4) Phillips screws. 4x vijak.

Carefully disconnect ribbon and flex cables. 2x flat in odstraniš glavo iz kletke (v bistvu asmo 1 flat!

Disassembling Axis 214 PTZ Camera (English/Slovenščina) Draft: 2019-07-23Guide ID: 28824 -

This document was generated on 2019-09-20 12:55:31 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 7

Step 7

Remove (2) Phillip screws. 2šraufa(samo odtegneš, pustiš notri).

Remove (1) protective clip. 1varovalna sponka.

Step 8

Remove 2 screws one on each side. 2 šraufa

Turn the latch mechanism to the right. obrni zatič na desno.

Disassembling Axis 214 PTZ Camera (English/Slovenščina) Draft: 2019-07-23Guide ID: 28824 -

This document was generated on 2019-09-20 12:55:31 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 7

To reassemble your device, follow these instructions in reverse order.

Step 9

It is difficult to disassemble.

Težko za razstaviti

Step 10

Remove (4) recessed screws. 4 šraufi, odstraniš plastiko, pazi na flat kabel.

Disconnect flat Ribbon Cable. Flat kabel.

Disassembling Axis 214 PTZ Camera (English/Slovenščina) Draft: 2019-07-23Guide ID: 28824 -

This document was generated on 2019-09-20 12:55:31 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 7