Dispersions for Adhesives and Construction€¦ · Dispersions for Adhesives and Construction 3 As experts with many years of experience in the field of polymer dispersions, we …

Dispersions for Adhesives and Construction Europe

2 Dispersions for Adhesives and Construction

BTC is BASF’s European sales organization for speciality chemi-cal distribution. The company’s seven regional subsidiaries sup-ply customers from numerous industry sectors all over Europe with about 4,000 high-quality chemicals and specialties.

Our strengths lie in our knowledge of the industry, based on many years of experience, and our proximity to our customers. Together with them, we develop tailor-made solutions, making sure that they benefit from a single contact person and one- stop service.

They also profit from the unique advantages of the BASF Ver-bund in terms of logistics and product availability and from the individual service provided by our local contacts.

Success through partnership – Take the lead with BTC Speci-ality Chemicals.

BASF and BTC – pooling our expertise BTC Speciality Chemical Distribution belongs to the world‘s leading chemical group, BASF – The Chemical Company.

»We offer added value in the form of partnership, technology, solutions and competitive advantage.« Dr. Christian Pflesser, Director Dispersions for Adhesives and Construction, BTC Speciality Chemical Distribution

www.btc-europe.comMore information about our company.

3Dispersions for Adhesives and Construction

As experts with many years of experience in the field of polymer dispersions, we endeavor, with our know-how and our innova-tive products, to make life easier for our customers in the most widely varying spheres of activity.

Architectural coatingsAqueous coatings for interior and exterior use, as well as paints, varnishes, textured finishes and coatings improve walls, facades and other surfaces. They also provide protection against weath-ering and environmental factors. The variety of construction ma-terials and surface structures, climatic conditions and applica-tions mean that what is required of the raw materials varies greatly. Our BASF binders form the basis of the manufacturing process for aqueous paints, stains and textured finishes. We also offer thickeners, dispersing agents and other additives required in the manufacture of paints. We always ensure that our entire coatings range is extremely gentle on the environment and the water supply.

ConstructionOne of the most demanding tasks in construction is protecting and preserving building materials. Professionals and do it your-self specialists today value the processing options afforded by construction chemical products, which is not least due to the raw materials used. As a component in our customers’ formulations, our products and their properties make a signifi-cant contribution to ensuring that the end products fulfill all the requirements of their respective field of application. BASF polymer dispersions and redispersible polymer powders are easy to handle and process, and can be used flexibly and in a variety of ways both indoors and outdoors.

Fiber bondingBASF is one of the leading manufacturers and suppliers of acrylic dispersions and resins for the nonwovens industry. The wide range of products is used in numerous industry branches as raw materials for binding, modifying and refining materials and substrates. We also offer thermoset binders for renewable raw materials and other fibers in the form of our acrylic solutions.

AdhesivesAs a global partner to the adhesives industry, BASF offers pioneering acrylic dispersions and innovative UV-crosslinkable acrylic hotmelts in the area of pressure sensitive adhesives and acrylic and polyurethane dispersions as raw materials for industrial adhesives. We offer polyvinylpyrrolidone (PVP) for glue sticks, hotmelt applications and other applications. Our products have excellent adhesive properties, combined with outstanding workability and faultless coating – even at high production and coating speeds.

Polyvinylpyrrolidone (PVP) for technical applicationsWater-soluble special polymers based on polyvinylpyrrolidone (PVP) have been on the market for over 50 years. Due to its ex-ceptional properties, PVP and corresponding copolymers are used with vinyl acetate, vinylimidazole and vinyl caprolactam under the brand names Luvitec®, Luvicross® and Collacral® VAL in a variety of technical applications.

Adhesive raw materials: making it stick, whatever the application.

Beauty and durability combined: coatings protect facades from weathering and other environmental impacts.

Our products are real all-rounders. They can be used as additives and processing aids and improve the functioning of countless everyday products. They are microscopic yet highly effective, and their variable structure means they are extremely flexible and can take on a range of tasks: They bind, refine, protect and modify, and can also be effective in different consistencies, for example as dis-persions, melts, powders or solutions.


Product* Polymer class Solids content (approx. %)

TG/MFT (°C)

pH value Viscosity (mPa*s)

Tearing force (approx. N/mm2)

Elongation at break (approx. %)

Fields of application Comments

acResin® A 204 UV PA > 99 TG – 34 20 – 55 *K5 soft resin for labels, tapes, film UV-crosslinkable, highly viscous

acResin® A 250 UV PA 100 TG – 34 30 – 70 *K5 soft resin for lables, tapes, film UV-crosslinkable, highly viscous


acResin® DS 3500 PA > 98 TG – 40 5000 *K11 soft resin for construction adhesives highly viscous

acResin® DS 3532 PA > 99 TG – 60 5 – 35 *K5 soft resin for labels, tapes UV-crosslinkable, highly viscous

Acrodur® 950 L PA 50 > 100 3.0 – 4.0 900 – 2500 *F1 acrylic solution as binder for wood, natural, synthetic and mineral fibers

thermally crosslinkable

Acrodur® DS 3515 SA 50 ~ 90 2.5 – 4.5 300 –1500 *F7 binder for wood, natural, synthetic and mineral fibers thermally crosslinkable

Acrodur® DS 3530 PA 50 > 100 2.5 – 4.0 100 – 300 *F1 acrylic solution as binder for wood, natural, synthetic and mineral fibers


Acrodur® DS 3558 PA 50 ~ 25 2.5 – 4.5 300 – 1500 *F7 binder for wood, natural, synthetic and mineral fibers thermally crosslinkable

Acronal® 12 DE PA 40 TG 70 6 – 7 30 – 50 *K1 binder for wood and natural fibers, technical lamination

Acronal® 280 KD PA 40 TG 20 2.2 – 3.5 100 – 500 *F2 glass fiber nonwovens cationic

Acronal® 290 D S/A 50 MFT ~ 20 7.5 – 9.0 700 – 1500 *A1 7 500 tile adhesives, construction coatings, special coatings, interior and exterior paints, textured finishes

all-rounders

Acronal® 32 D PA 50 TG – 20 2.5 – 4.5 10 – 40 *F2 technical nonwovens thermally crosslinkable

Acronal® 4 D PA 50 TG – 43 6.0 – 7.5 15 – 40 *K1 0.03 2500 construction adhesives, labels, tapes, film

Acronal® 4 F PA TG – 40 130 – 200 *B1 soft resin for construction adhesives highly viscous

Acronal® 50 D PA 50 TG – 45 3 – 5 20 – 85 *K1 1 1300 labels, tapes, film

Acronal® 500 D A/VAC 50 TG – 13 3.5 – 4.7 15 – 35 *K1 1.5 2500 glossy film lamination, masking tapes, leather fiber board, PVC films

Acronal® 567 D S/A 50 TG – 6 7.5 – 9.0 700 – 1700 *A1 approx. 2 > 1500 technical nonwovens, elastomeric paints flexible down to –5 °C

Acronal® 80 D PA 50 TG – 53 4.5 – 5.5 80 – 150 *K1 0.27 2000 labels, tapes, film, technical nonwovens

Acronal® 81 D PA 60 MFT ~ < 1 4.5 – 5.5 1000 – 1800 *B1 sealants, flooring adhesives

Acronal® A 107 PA 50 TG – 46 6.0 – 7.0 40 –150 *B2 0.01 > 3000 labels, tapes, sealants

Acronal® A 110 PA 55 TG – 55 6.5 – 8.0 20 – 200 *K1 0.01 > 2000 labels for plasticizer-free, removable applications

Acronal® A 145 PA 51 TG – 44 7.0 - 9.0 soft PVC films, selfadhesive lables, films and tapes removeable, good plasiticizer stabitility

Acronal® A 200 PA 70 TG – 43 6.5 – 8.0 150 – 500 *B1 0.20 1200 flooring adhesives low odor, usually needs no additional resins, solvents or plasticizers

Acronal® A 213 S PA 50 TG – 45 7.0 – 9.0 15 – 40 *K1 0.3 1700 films self-crosslinking

Acronal® A 225 PA 60 TG – 45 6.0 – 8.0 30 – 150 *K1 transparent lables very good adhesion on apolar surfaces

Acronal® A 240 PA 51 TG – 30 5.0 – 6.5 16 –19 *K2 filmic labels, decorative films high tack, low blushing, particularly suitable for PVC applications

Acronal A 273 S PA 50 TG – 36 2.8 – 4.0 10 – 50 *K1 interlinings self-crosslinking

Acronal® A 280 PA 69 TG – 43 3.5 – 6.0 200 – 1000 *B1 0.17 1500 flooring adhesives

Acronal® A 310 S PA 55 TG – 20 4.5 – 6.5 50 – 120 *K1 1.3 800 glossy film lamination self-crosslinking





Acronal® A 420 S PA 50 TG – 6 3.5 – 6.5 50 – 200 *F6 technical nonwovens thermally crosslinkable

Acronal® A 508 PA 41 MFT ~ < 3 7.5 – 8.5 50 – 200 *A1 primers finely dispersed

Acronal® A 509 PA 50 MFT ~ 5 7.5 – 9.5 200 – 700 *A1 3 700 exterior paints and textured finishes finely dispersed, low blushing

Acronal® A 684 PA 50 MFT ~ 17 7.5 – 9.0 100 – 400 *A1 12 250 house paints for critical substrates such as alkyd resin, PVC, zinc

Acronal® A 706 PA 48 MFT ~ 24 8.0 – 9.5 80 – 190 *A1 8 150 glossy varnishes self-crosslinking, well-suited to coatings for protecting concrete floorings, e.g. cellars, balconies and patios

Acronal® A 754 PA 48 MFT ~ 17 7.5 – 8.5 200 – 900 *A1 12 200 coatings, wood stains and marble stone finishes glossy

Acronal® A 969 PA 40 TG 70 6.5 – 8.0 5 – 35 *F2 mineral fiber bonding

Acronal® DS 3502 PA 55 TG 4 6.5 – 8.5 2 – 6 *K1 0.15 1500 wet labeling from PET, PE/PP, paper and board, anti drumming compound

contains protective colloid

Acronal® DS 3511 S/A 54 TG – 30 7.0 – 8.5 50 – 300 *B1 0.20 2000 special coatings, mortar modification, tile adhesives ammonia-free

Acronal® DS 3618 PA 69 TG – 40 3.5 – 6.0 50 – 400 *K1 films PVC/PES

Acronal® DS 5002 PA 55 MFT < 1 6.5 – 7.5 30 – 150 *B1 floor and wall covering adhesives fast drying, good thermo-dimensional stability, resin-resistant, adding alkaline solutions increases viscosity

Acronal® DS 5011 S/A 57 TG – 6 7 – 8 120 – 350 *B1 0.60 > 1800 flexible waterproofing slurry ammonia-free

Acronal® DS 5017 PA 68 TG – 50 6.5 – 7.5 800 – 1600 *K1 sealants plasticizer free

Acronal® DS 5018 S/A 50 MFT ~ 25 7.0 – 8.5 90 – 300 *B8 special coatings, mortar modification low water requirements, increases bending tension strength

Acronal® DS 6257 PA 60 MFT ~ < 1 7.0 – 8.5 40 – 200 *A1 elastic exterior paints self-crosslinking

Acronal® DS 6258 S/A 50 TG 10 7.5 – 8.5 20 – 200 *A1 3.2 1000 interior paints, exterior paints emission and solvent free, low dirt absorption

Acronal® DS 6262 PA 50 MFT ~ 16 7.5 – 8.5 30 – 200 *A1 gloss varnishes self-crosslinking, good chemical resistance

* All values are approximate figures.



TG/MFT (°C)





acResin® A 204 UV PA > 99 TG – 34 20 – 55 *K5 soft resin for labels, tapes, film UV-crosslinkable, highly viscous



acResin® DS 3500 PA > 98 TG – 40 5000 *K11 soft resin for construction adhesives highly viscous

acResin® DS 3532 PA > 99 TG – 60 5 – 35 *K5 soft resin for labels, tapes UV-crosslinkable, highly viscous

Acrodur® 950 L PA 50 > 100 3.0 – 4.0 900 – 2500 *F1 acrylic solution as binder for wood, natural, synthetic and mineral fibers


Acrodur® DS 3515 SA 50 ~ 90 2.5 – 4.5 300 –1500 *F7 binder for wood, natural, synthetic and mineral fibers thermally crosslinkable

Acrodur® DS 3530 PA 50 > 100 2.5 – 4.0 100 – 300 *F1 acrylic solution as binder for wood, natural, synthetic and mineral fibers


Acrodur® DS 3558 PA 50 ~ 25 2.5 – 4.5 300 – 1500 *F7 binder for wood, natural, synthetic and mineral fibers thermally crosslinkable

Acronal® 12 DE PA 40 TG 70 6 – 7 30 – 50 *K1 binder for wood and natural fibers, technical lamination

Acronal® 280 KD PA 40 TG 20 2.2 – 3.5 100 – 500 *F2 glass fiber nonwovens cationic

Acronal® 290 D S/A 50 MFT ~ 20 7.5 – 9.0 700 – 1500 *A1 7 500 tile adhesives, construction coatings, special coatings, interior and exterior paints, textured finishes

all-rounders

Acronal® 32 D PA 50 TG – 20 2.5 – 4.5 10 – 40 *F2 technical nonwovens thermally crosslinkable

Acronal® 4 D PA 50 TG – 43 6.0 – 7.5 15 – 40 *K1 0.03 2500 construction adhesives, labels, tapes, film

Acronal® 4 F PA TG – 40 130 – 200 *B1 soft resin for construction adhesives highly viscous

Acronal® 50 D PA 50 TG – 45 3 – 5 20 – 85 *K1 1 1300 labels, tapes, film

Acronal® 500 D A/VAC 50 TG – 13 3.5 – 4.7 15 – 35 *K1 1.5 2500 glossy film lamination, masking tapes, leather fiber board, PVC films

Acronal® 567 D S/A 50 TG – 6 7.5 – 9.0 700 – 1700 *A1 approx. 2 > 1500 technical nonwovens, elastomeric paints flexible down to –5 °C

Acronal® 80 D PA 50 TG – 53 4.5 – 5.5 80 – 150 *K1 0.27 2000 labels, tapes, film, technical nonwovens

Acronal® 81 D PA 60 MFT ~ < 1 4.5 – 5.5 1000 – 1800 *B1 sealants, flooring adhesives

Acronal® A 107 PA 50 TG – 46 6.0 – 7.0 40 –150 *B2 0.01 > 3000 labels, tapes, sealants

Acronal® A 110 PA 55 TG – 55 6.5 – 8.0 20 – 200 *K1 0.01 > 2000 labels for plasticizer-free, removable applications

Acronal® A 145 PA 51 TG – 44 7.0 - 9.0 soft PVC films, selfadhesive lables, films and tapes removeable, good plasiticizer stabitility

Acronal® A 200 PA 70 TG – 43 6.5 – 8.0 150 – 500 *B1 0.20 1200 flooring adhesives low odor, usually needs no additional resins, solvents or plasticizers

Acronal® A 213 S PA 50 TG – 45 7.0 – 9.0 15 – 40 *K1 0.3 1700 films self-crosslinking

Acronal® A 225 PA 60 TG – 45 6.0 – 8.0 30 – 150 *K1 transparent lables very good adhesion on apolar surfaces

Acronal® A 240 PA 51 TG – 30 5.0 – 6.5 16 –19 *K2 filmic labels, decorative films high tack, low blushing, particularly suitable for PVC applications

Acronal A 273 S PA 50 TG – 36 2.8 – 4.0 10 – 50 *K1 interlinings self-crosslinking







Acronal® A 420 S PA 50 TG – 6 3.5 – 6.5 50 – 200 *F6 technical nonwovens thermally crosslinkable

Acronal® A 508 PA 41 MFT ~ < 3 7.5 – 8.5 50 – 200 *A1 primers finely dispersed

Acronal® A 509 PA 50 MFT ~ 5 7.5 – 9.5 200 – 700 *A1 3 700 exterior paints and textured finishes finely dispersed, low blushing

Acronal® A 684 PA 50 MFT ~ 17 7.5 – 9.0 100 – 400 *A1 12 250 house paints for critical substrates such as alkyd resin, PVC, zinc

Acronal® A 706 PA 48 MFT ~ 24 8.0 – 9.5 80 – 190 *A1 8 150 glossy varnishes self-crosslinking, well-suited to coatings for protecting concrete floorings, e.g. cellars, balconies and patios

Acronal® A 754 PA 48 MFT ~ 17 7.5 – 8.5 200 – 900 *A1 12 200 coatings, wood stains and marble stone finishes glossy

Acronal® A 969 PA 40 TG 70 6.5 – 8.0 5 – 35 *F2 mineral fiber bonding

Acronal® DS 3502 PA 55 TG 4 6.5 – 8.5 2 – 6 *K1 0.15 1500 wet labeling from PET, PE/PP, paper and board, anti drumming compound

contains protective colloid

Acronal® DS 3511 S/A 54 TG – 30 7.0 – 8.5 50 – 300 *B1 0.20 2000 special coatings, mortar modification, tile adhesives ammonia-free

Acronal® DS 3618 PA 69 TG – 40 3.5 – 6.0 50 – 400 *K1 films PVC/PES

Acronal® DS 5002 PA 55 MFT < 1 6.5 – 7.5 30 – 150 *B1 floor and wall covering adhesives fast drying, good thermo-dimensional stability, resin-resistant, adding alkaline solutions increases viscosity

Acronal® DS 5011 S/A 57 TG – 6 7 – 8 120 – 350 *B1 0.60 > 1800 flexible waterproofing slurry ammonia-free

Acronal® DS 5017 PA 68 TG – 50 6.5 – 7.5 800 – 1600 *K1 sealants plasticizer free

Acronal® DS 5018 S/A 50 MFT ~ 25 7.0 – 8.5 90 – 300 *B8 special coatings, mortar modification low water requirements, increases bending tension strength

Acronal® DS 6257 PA 60 MFT ~ < 1 7.0 – 8.5 40 – 200 *A1 elastic exterior paints self-crosslinking

Acronal® DS 6258 S/A 50 TG 10 7.5 – 8.5 20 – 200 *A1 3.2 1000 interior paints, exterior paints emission and solvent free, low dirt absorption

Acronal® DS 6262 PA 50 MFT ~ 16 7.5 – 8.5 30 – 200 *A1 gloss varnishes self-crosslinking, good chemical resistance



TG/MFT (°C)





Acronal® DS 6266 PA 48 MFT ~ 14 7.5 – 8.5 80 – 500 *A11 marble stone finishes, wood stains, gloss paints and silk gloss paints or matt finish exterior paint

all-rounder

Acronal® DS 6270 PA 50 MFT ~ 2 7.0 – 8.5 50 – 500 *A11 interior paints solvent free, low odour

Acronal® DS 6277 PA 48 MFT < 3 7.5 – 9.0 100 – 450 *A11 6 350 decorative exterior wood coating opaque systems, high blocking resistance

Acronal® DS 6282 X PA 47 – 49 MFT ~ 2 7.5 – 8.5 50 – 500 *F7 premium interior paint extremly low odour, outstanding stainresistance

Acronal® LA 449 S PA 50 TG – 7 2.8 – 4.0 20 – 100 *K3 2.7 1100 film coatings self-crosslinking

Acronal® LA 471 S PA 51 TG – 7 5.0 – 6.0 15 – 100 *F2 technical and medical nonwovens self-crosslinking

Acronal® LN 579 S PA 50 TG 7 3.5 – 6.5 20 – 60 *F2 high loft waddings thermally crosslinkable

Acronal® LN 838 S PA 51 TG 38 5.0 – 7.0 20 – 60 *F2 technical nonwovens thermally crosslinkable

Acronal® LR 8960 PA 50 MFT ~ < 1 7.5 – 9.0 100 – 300 *A1 6 300 low pigmented wood coatings and stains block resistant

Acronal® LR 9014 PA 45 MFT ~ 3 7.5 – 8.5 100 – 400 *A1 wood coatings and stains, latex paints good wet adhesion, block resistant

Acronal® N 137 PA 54 MFT < 1 6.5 – 8.5 100 – 150 *B1 flexible, waterproof coatings

Acronal® N 285 PA 55 TG – 40 2 – 3 40 – 90 *K1 0.5 1500 self-adhesive products high surface tack

Acronal® N 286 PA 50 TG – 40 7.0 – 8.5 20 – 70 *K1 0.5 1500 self-adhesive products high surface tack

Acronal® S 201 S/A 50 TG – 30 4.0 – 5.0 65 – 120 *K1 glossy film lamination

Acronal® S 300 S/A 50 TG – 22 8 – 9 50 – 300 *B1 flexible roof coatings self-crosslinking

Acronal® S 400 S/A 57 TG – 6 7.0 – 8.5 140 – 200 *B1 0.80 > 1800 two-component construction adhesive, crack-bridging systems, flexible roof sealants

Acronal® S 410 S/A 60 TG – 10 4.0 – 5.5 60 – 300 *B1 0.35 > 1800 sealants, construction adhesives

Acronal® S 430 P S/A Powder TG – 15 7.2 – 8.2 special coatings, highly flexible tile adhesives

Acronal® S 456 S/A 57 TG – 8 7.0 – 8.5 140 – 200 *B1 1.20 > 2500 mortar modification, tile adhesives

Acronal® S 533 S/A 52 MFT ~ 1 6.5 – 8.0 80 – 300 *B1 5.00 700 tile adhesives, special coatings, construction adhesives

Acronal® S 537 S S/A 54 – 56 TG – 5 6.0 – 8.0 30 – 80 *F2 technical nonwovens self-crosslinking

Acronal® S 559 S/A 50 MFT ~ 3 6.0 – 7.5 70 – 400 *A1 tinters and solid tone paints, exterior paints, textured finishes, interior paints, silicate paints

emission and solvent free

Acronal® S 560 S/A 50 TG 5 7.5 – 8.5 75 – 150 *F2 nonwovens heat sealable

Acronal® S 562 S/A 50 MFT ~ < 1 7.0 – 8.5 400 – 1200 *A1 2 1100 elastic exterior paints crack bridging systems, synthetic resin plasters

Acronal® S 563 S/A 50 MFT ~ 3 6.0 – 7.5 100 – 450 *A1 8 600 latex paints, wood coatings, interior paints

Acronal® S 600 S/A 50 TG 17 7 – 8 300 – 1500 *B1 8.00 700 special coatings, construction adhesives

Acronal® S 629 P S/A Powder MFT ~ 10 6.5 – 8.5 mortar modification, tile adhesives



Acronal® S 716 S/A 50 MFT ~ 22 6.5 – 8.5 300 – 1000 *A1 7 500 coatings for protecting concrete, interior and exterior paints, textured finishes

Acronal® S 726 S/A 45 MFT ~ 8 9.0 – 11.0 20 – 100 *A1 9 250 primers for wood primers to prevent the bleeding of wood constituents

Acronal® S 727 PA 45 MFT ~ 8 9.0 – 11.0 20 – 100 *A11 transparent and pigmented wood coatings and stains tannine blocking, block free

Acronal® S 728 S/A 49 – 51 TG 23 6.5 – 7.5 100 – 280 *F1 wallpaper, decorative foils, cellulosic filters decorative foils, celulosic filter

Acronal® S 734 P S/A ≥ 98 TG 20 7.5 – 9.0 selfleveling fillers, repair motars, tile adhesives and base coat motars modifier for hydraulic binders


Acronal® S 747 S S/A 50 TG 25 4.0 – 5.5 30 – 150 *F2 technical nonwovens thermally crosslinkable

Acronal® S 790 S/A 50 MFT ~ 20 7.5 – 9 700 – 1500 *A1 exterior and interior paints, synthetic resin finishes, primers and cement finishing coats

Acronal® S 813 S/A 50 7.6 – 8.2 100 – 250 *B8 tile adhesive outstanding adhesion also with fillers, good resistance to water

Acronal® S 888 S S/A 49.5 TG 31 7.0 – 9.0 100 – 600 *F2 PET roof membrane nonwovens, leather fiber board thermally crosslinkable

Acronal® S 940 S/A 49 – 51 TG 79 7.0 – 8.5 10 – 100 *F2 natural and mineral fibres good waterresistance

Acronal® S 980 S S/A 45 TG 50 7.0 – 9.0 30 – 100 *F2 glass fiber nonwovens hydrophobic

Acronal® S 996 S S/A 45 – 47 5.5 – 7.0 30 – 80 *F2 wallcovering, filter, preimpregnated systems stable with methanol and resins

Acronal® T 35 D PA 50 TG – 36 2 – 4.5 10 – 40 *K1 laminating and flock adhesive, protective film adhesive excellent washing and cleaning stability

Acronal® V 115 PA 67 TG – 58 3.5 – 4.5 100 – 500 *K1 labels suitable for low temperatures

Acronal® V 212 PA 69 TG – 40 3.5 – 6.0 300 – 1100 *K1 labels, tapes, films, sealing strips, packaging adhesives

Acronal® V 215 PA 69 TG – 43 3.5 – 6.0 200 – 1000 *K1 labels, tapes, films

Acronal® V 278 PA 64 – 66 TG – 40 4.0 – 5.0 50 – 400 *B1 sealants highly flexible at low temperatures

AQACell® DS 6273 S/A 29 – 31 7.5 – 8.5 > = 50 *B1 organic opacifiing pigment increase of TiO2 efficency

AQAGloss® HY 42 MFT < 1 7.0 – 8.5 40 – 300 *A11 aqueous hybrid binder for high-gloss paints fine-particle, low viscosity, blocking on wood, good hiding power, high gloss and haze-free




TG/MFT (°C)





Acronal® DS 6266 PA 48 MFT ~ 14 7.5 – 8.5 80 – 500 *A11 marble stone finishes, wood stains, gloss paints and silk gloss paints or matt finish exterior paint

all-rounder

Acronal® DS 6270 PA 50 MFT ~ 2 7.0 – 8.5 50 – 500 *A11 interior paints solvent free, low odour

Acronal® DS 6277 PA 48 MFT < 3 7.5 – 9.0 100 – 450 *A11 6 350 decorative exterior wood coating opaque systems, high blocking resistance

Acronal® DS 6282 X PA 47 – 49 MFT ~ 2 7.5 – 8.5 50 – 500 *F7 premium interior paint extremly low odour, outstanding stainresistance

Acronal® LA 449 S PA 50 TG – 7 2.8 – 4.0 20 – 100 *K3 2.7 1100 film coatings self-crosslinking

Acronal® LA 471 S PA 51 TG – 7 5.0 – 6.0 15 – 100 *F2 technical and medical nonwovens self-crosslinking

Acronal® LN 579 S PA 50 TG 7 3.5 – 6.5 20 – 60 *F2 high loft waddings thermally crosslinkable

Acronal® LN 838 S PA 51 TG 38 5.0 – 7.0 20 – 60 *F2 technical nonwovens thermally crosslinkable

Acronal® LR 8960 PA 50 MFT ~ < 1 7.5 – 9.0 100 – 300 *A1 6 300 low pigmented wood coatings and stains block resistant

Acronal® LR 9014 PA 45 MFT ~ 3 7.5 – 8.5 100 – 400 *A1 wood coatings and stains, latex paints good wet adhesion, block resistant

Acronal® N 137 PA 54 MFT < 1 6.5 – 8.5 100 – 150 *B1 flexible, waterproof coatings

Acronal® N 285 PA 55 TG – 40 2 – 3 40 – 90 *K1 0.5 1500 self-adhesive products high surface tack

Acronal® N 286 PA 50 TG – 40 7.0 – 8.5 20 – 70 *K1 0.5 1500 self-adhesive products high surface tack

Acronal® S 201 S/A 50 TG – 30 4.0 – 5.0 65 – 120 *K1 glossy film lamination

Acronal® S 300 S/A 50 TG – 22 8 – 9 50 – 300 *B1 flexible roof coatings self-crosslinking

Acronal® S 400 S/A 57 TG – 6 7.0 – 8.5 140 – 200 *B1 0.80 > 1800 two-component construction adhesive, crack-bridging systems, flexible roof sealants

Acronal® S 410 S/A 60 TG – 10 4.0 – 5.5 60 – 300 *B1 0.35 > 1800 sealants, construction adhesives

Acronal® S 430 P S/A Powder TG – 15 7.2 – 8.2 special coatings, highly flexible tile adhesives

Acronal® S 456 S/A 57 TG – 8 7.0 – 8.5 140 – 200 *B1 1.20 > 2500 mortar modification, tile adhesives

Acronal® S 533 S/A 52 MFT ~ 1 6.5 – 8.0 80 – 300 *B1 5.00 700 tile adhesives, special coatings, construction adhesives

Acronal® S 537 S S/A 54 – 56 TG – 5 6.0 – 8.0 30 – 80 *F2 technical nonwovens self-crosslinking

Acronal® S 559 S/A 50 MFT ~ 3 6.0 – 7.5 70 – 400 *A1 tinters and solid tone paints, exterior paints, textured finishes, interior paints, silicate paints

emission and solvent free

Acronal® S 560 S/A 50 TG 5 7.5 – 8.5 75 – 150 *F2 nonwovens heat sealable

Acronal® S 562 S/A 50 MFT ~ < 1 7.0 – 8.5 400 – 1200 *A1 2 1100 elastic exterior paints crack bridging systems, synthetic resin plasters

Acronal® S 563 S/A 50 MFT ~ 3 6.0 – 7.5 100 – 450 *A1 8 600 latex paints, wood coatings, interior paints

Acronal® S 600 S/A 50 TG 17 7 – 8 300 – 1500 *B1 8.00 700 special coatings, construction adhesives




Acronal® S 716 S/A 50 MFT ~ 22 6.5 – 8.5 300 – 1000 *A1 7 500 coatings for protecting concrete, interior and exterior paints, textured finishes

Acronal® S 726 S/A 45 MFT ~ 8 9.0 – 11.0 20 – 100 *A1 9 250 primers for wood primers to prevent the bleeding of wood constituents

Acronal® S 727 PA 45 MFT ~ 8 9.0 – 11.0 20 – 100 *A11 transparent and pigmented wood coatings and stains tannine blocking, block free

Acronal® S 728 S/A 49 – 51 TG 23 6.5 – 7.5 100 – 280 *F1 wallpaper, decorative foils, cellulosic filters decorative foils, celulosic filter



Acronal® S 747 S S/A 50 TG 25 4.0 – 5.5 30 – 150 *F2 technical nonwovens thermally crosslinkable

Acronal® S 790 S/A 50 MFT ~ 20 7.5 – 9 700 – 1500 *A1 exterior and interior paints, synthetic resin finishes, primers and cement finishing coats

Acronal® S 813 S/A 50 7.6 – 8.2 100 – 250 *B8 tile adhesive outstanding adhesion also with fillers, good resistance to water

Acronal® S 888 S S/A 49.5 TG 31 7.0 – 9.0 100 – 600 *F2 PET roof membrane nonwovens, leather fiber board thermally crosslinkable

Acronal® S 940 S/A 49 – 51 TG 79 7.0 – 8.5 10 – 100 *F2 natural and mineral fibres good waterresistance

Acronal® S 980 S S/A 45 TG 50 7.0 – 9.0 30 – 100 *F2 glass fiber nonwovens hydrophobic

Acronal® S 996 S S/A 45 – 47 5.5 – 7.0 30 – 80 *F2 wallcovering, filter, preimpregnated systems stable with methanol and resins

Acronal® T 35 D PA 50 TG – 36 2 – 4.5 10 – 40 *K1 laminating and flock adhesive, protective film adhesive excellent washing and cleaning stability

Acronal® V 115 PA 67 TG – 58 3.5 – 4.5 100 – 500 *K1 labels suitable for low temperatures

Acronal® V 212 PA 69 TG – 40 3.5 – 6.0 300 – 1100 *K1 labels, tapes, films, sealing strips, packaging adhesives

Acronal® V 215 PA 69 TG – 43 3.5 – 6.0 200 – 1000 *K1 labels, tapes, films

Acronal® V 278 PA 64 – 66 TG – 40 4.0 – 5.0 50 – 400 *B1 sealants highly flexible at low temperatures

AQACell® DS 6273 S/A 29 – 31 7.5 – 8.5 > = 50 *B1 organic opacifiing pigment increase of TiO2 efficency

AQAGloss® HY 42 MFT < 1 7.0 – 8.5 40 – 300 *A11 aqueous hybrid binder for high-gloss paints fine-particle, low viscosity, blocking on wood, good hiding power, high gloss and haze-free



TG/MFT (°C)





Basonat® DS 3582 > = 99,0 20 – 60 crosslinker easily dispersable crosslinking component for carboxylic dispersions

Basonat® F 200 WD 1,5 – 3,5 *K1 water-dispersible isocyanate

Basophob® WDS 60 8.4 – 9.4 200 – 500 *A3 alkaline paraffin dispersions in water

Butofan® LS 103 B/S 50,5 TG – 48 7.0 – 8.0 100 – 300 *K3 0.7 1000 labels, tapes good low temperature resistance, low sensitivity to water

Butonal® NS 175 B/S 71 TG – 50 10.0 – 10.7 1000 – 1500 *B7 bitumen modification

Butonal® NS 198 B/S 63.0 – 65.0 TG – 53 5.0 – 5.6 250 – 2000 *B3 0.5 900 bitumen modification cathionic

Butonal® NX 1129 B/S 70,5 TG – 56 10.0 – 10.7 1000 – 2000 *B7 bitumen modification

Butonal® NX 4190 B/S 63.0 – 65.0 TG – 53 5.0 – 5.6 250 – 2000 *B3 bitumen modification cathionic crosslinking

COL.9® DS 1200 X PA 34 – 36 8.5 – 9.5 5 – 100 *B1 exterior paints nanocomposit dispersion

Collacral® DS 6256 AS Powder 5.0 – 7.0 highly effective thickener for synthetic resin finishes and marble stone finishes

improves resistance to blushing

Collacral® HP AS 30 7.5 – 9.0 100 – 300 *F2 thickener for sealants and adhesives in the alkaline pH range

Collacral® LA 30 PVP 30 7.0 – 10.0 100 – 300 *A1 thickener for pigmented emulsion paints protective colloidal properties

Collacral® PU 70 PU 24 – 28 8.5 – 10.5 1200 – 3900 *A11 thickener solvent-free, for low and moderate shear range

Collacral® PU 80 PU 24 – 28 8.5 – 10.5 2000 – 6000 *A11 thickener solvent-free, for moderate and high shear range

Emuldur® 360 A PU 39 – 41 TG – 47 7.5 – 9.5 15 – 95 *F3 technical nonwovens, interlinings hydrolysis resistance

Emuldur® 381 A PU 40 TG ~ – 28 7.5 – 9.5 12.0 – 25.0 *FB3 primer for PVC films

Emuldur® DS 2404 X PU 39 – 41 7.0 – 9.0 5 – 200 *F3 technical nonwovens, interlinings hydrolysis resistance

Epotal® A 816 PA 45 TG ~ 50 2.0 – 3.0 15 – 100 *FB1 coating for film, paper, board can be heat sealed and easily printed

Epotal® P 100 ECO PU 39 – 41 8.0 – 9.0 15 – 70 *K1 film for film lamination meets the requirements of the European standard for biodegradable plastics

Epotal® P 350 PU 40 TG ~ – 44 6.0 – 7.0 39 – 41 *FB1 ~ 0.4 > 2000 adhesive for polyolefin films good moisture resistance

Gleitmitteldispersion® 8645 MEW 20 3.0 – 5.0 surface modification when using film coatings reduces surface tackiness, improves the sliding properties of film coatings

Joncryl® 2560 S/A 48 MFT < 5 7.0 – 9.0 600 *F5 universal binder for exterior wood or modifier to reduce mud-cracking tendency in opaque coatings or to improve gloss

soft multipurpose binder and modifier, lowers dramatically film tension andmud-cracking tendency, typical problem solver

Joncryl® 8280 S/A 46 MFT ~ 20 7.0 – 9.0 200 *F5 for deco/joinery and trim/high gloss paints hard

Joncryl® 8284 S/A 40 MFT < 0 8.0 – 10.0 120 *F5 binder for opaque and transparent tannin blocking primers, for anti-bleeding primers on tropical hardwoods for joinery and decorative coatings

excellent tannin blocking at low odour, blocking resistance, easy to formulate, usable in topcoats

Joncryl® 8380 S/A 40 MFT ~ 16 7.0 – 9.0 universal character, for transparent and opaque topcoats, primers and impreg-nations

excellent water-barrier properties and wet adhesion

Joncryl® 8383 S/A 40 MFT ~ 16 7.0 – 9.0 80 *F5 universal character, for transparent and opaque topcoats, primers and impreg-nations


Joncryl® 8385 S/A 49 MFT < 5 6.5 – 8.5 1350 *F5 soft modifier/deco binder superior water barrier properties lower blocking resistance

Joncryl® 8386 S/A 40 MFT < 5 7.0 – 9.0 75 *F5 universal binder for exterior joinery, for clear and opaque topcoats, primers and impregnations

modern fine-sized, self-crosslinking, exceptional blocking resistance

Latekoll® D AS 25 2.3 – 3.3 2 – 10 *B1 thickener for coatings, synthetic resin finishes, construction adhesives and nonwoven binders

thickens in the alkaline pH range

Latekoll® DS 6269 PA 29 – 31 30 – 80 *F1 thickener for interior and exterior paints and elastomeric coatings high thickening efficienty, pronounced pseudoplastic (low shear) flow behavior

Latekoll® P PA 97 – 100 2.3 – 3.3 2 – 10 *F2 powder-thickener for interior and exterior paints, builing adhesives, plasters leads to non newtonion viscosity

Luhydran® A 848 S PA 44.5 MFT ~ 39 6.5 – 7.5 150 – 250 *A1 coatings, wood coatings and stains, construction coatings

Lumiten® AQA 10 Water content~ 15*W1

6.0 – 8.0 max. 300 *FB4 additive for alkyd varnishes allows up to 30% water to be mixed in with alkyd paints

Lumiten® EL > 99 3.5 – 4.5 350 *B4 defoamer for adhesives and sealants

Lumiten® E-P 3108 Powder defoamer in dry mixtures prevents lump formation when adding powder mixtures

Lumiten® I-SC 78 5.5 – 7.5 wetting agent

Lumiten® N-OC 30 5.0 – 8.0 interior and exterior paints, fillers wetting agent to better cementitious and calcium oxide stability. Improves storagetime of interior and exterior paints

Lumiten® N-OG Powder 7.0 80 *A5 emulsifier for improving tolerance to cement and lime aids the cleaning of mixing equipment

Luphen® 585 PU 40 TG – 46 7.0 – 9.0 ca. 40 *K12 technical lamination low activation temperature

Luphen® 700 PU 35 – 39 TG 13 7.0 – 9.0 40 – 150 *F2 film-coatings primer and topcoat for plastic films

Luphen® D 200 A PU 40 TG – 46 8.0 – 9.0 20 – 60 *K1 16 700 technical lamination, technical nonwovens low activation temperature

Luphen® D 207 E PU 45 TG – 48 6.5 – 8.5 50 – 180 *K1 40 1000 technical lamination high thermo-dimensional stability

Luphen® D 259 U PU 40 TG – 45 6.0 – 7.0 20 – 120 *K1 1.8 1000 composite film lamination

Luphen® D DS 3548 PU 45 TG – 46 8.0 – 9.5 10 – 70 *K1 20 700 contact adhesives resin modified

Lusolvan® FBH 4 – 8 *A6 coalescents/plasticisers

Lutonal® A 50 (50%) Ethanol 50 5000 – 20000 *A1 soft resins for increasing the adhesion and flexibility of printing inks, cellulose nitrate varnishes and resin varnishes

resistant to saponification




TG/MFT (°C)





Basonat® DS 3582 > = 99,0 20 – 60 crosslinker easily dispersable crosslinking component for carboxylic dispersions

Basonat® F 200 WD 1,5 – 3,5 *K1 water-dispersible isocyanate

Basophob® WDS 60 8.4 – 9.4 200 – 500 *A3 alkaline paraffin dispersions in water

Butofan® LS 103 B/S 50,5 TG – 48 7.0 – 8.0 100 – 300 *K3 0.7 1000 labels, tapes good low temperature resistance, low sensitivity to water

Butonal® NS 175 B/S 71 TG – 50 10.0 – 10.7 1000 – 1500 *B7 bitumen modification

Butonal® NS 198 B/S 63.0 – 65.0 TG – 53 5.0 – 5.6 250 – 2000 *B3 0.5 900 bitumen modification cathionic

Butonal® NX 1129 B/S 70,5 TG – 56 10.0 – 10.7 1000 – 2000 *B7 bitumen modification

Butonal® NX 4190 B/S 63.0 – 65.0 TG – 53 5.0 – 5.6 250 – 2000 *B3 bitumen modification cathionic crosslinking

COL.9® DS 1200 X PA 34 – 36 8.5 – 9.5 5 – 100 *B1 exterior paints nanocomposit dispersion

Collacral® DS 6256 AS Powder 5.0 – 7.0 highly effective thickener for synthetic resin finishes and marble stone finishes

improves resistance to blushing

Collacral® HP AS 30 7.5 – 9.0 100 – 300 *F2 thickener for sealants and adhesives in the alkaline pH range

Collacral® LA 30 PVP 30 7.0 – 10.0 100 – 300 *A1 thickener for pigmented emulsion paints protective colloidal properties

Collacral® PU 70 PU 24 – 28 8.5 – 10.5 1200 – 3900 *A11 thickener solvent-free, for low and moderate shear range

Collacral® PU 80 PU 24 – 28 8.5 – 10.5 2000 – 6000 *A11 thickener solvent-free, for moderate and high shear range

Emuldur® 360 A PU 39 – 41 TG – 47 7.5 – 9.5 15 – 95 *F3 technical nonwovens, interlinings hydrolysis resistance

Emuldur® 381 A PU 40 TG ~ – 28 7.5 – 9.5 12.0 – 25.0 *FB3 primer for PVC films

Emuldur® DS 2404 X PU 39 – 41 7.0 – 9.0 5 – 200 *F3 technical nonwovens, interlinings hydrolysis resistance

Epotal® A 816 PA 45 TG ~ 50 2.0 – 3.0 15 – 100 *FB1 coating for film, paper, board can be heat sealed and easily printed

Epotal® P 100 ECO PU 39 – 41 8.0 – 9.0 15 – 70 *K1 film for film lamination meets the requirements of the European standard for biodegradable plastics

Epotal® P 350 PU 40 TG ~ – 44 6.0 – 7.0 39 – 41 *FB1 ~ 0.4 > 2000 adhesive for polyolefin films good moisture resistance

Gleitmitteldispersion® 8645 MEW 20 3.0 – 5.0 surface modification when using film coatings reduces surface tackiness, improves the sliding properties of film coatings

Joncryl® 2560 S/A 48 MFT < 5 7.0 – 9.0 600 *F5 universal binder for exterior wood or modifier to reduce mud-cracking tendency in opaque coatings or to improve gloss

soft multipurpose binder and modifier, lowers dramatically film tension andmud-cracking tendency, typical problem solver

Joncryl® 8280 S/A 46 MFT ~ 20 7.0 – 9.0 200 *F5 for deco/joinery and trim/high gloss paints hard

Joncryl® 8284 S/A 40 MFT < 0 8.0 – 10.0 120 *F5 binder for opaque and transparent tannin blocking primers, for anti-bleeding primers on tropical hardwoods for joinery and decorative coatings

excellent tannin blocking at low odour, blocking resistance, easy to formulate, usable in topcoats

Joncryl® 8380 S/A 40 MFT ~ 16 7.0 – 9.0 universal character, for transparent and opaque topcoats, primers and impreg-nations


Joncryl® 8383 S/A 40 MFT ~ 16 7.0 – 9.0 80 *F5 universal character, for transparent and opaque topcoats, primers and impreg-nations


Joncryl® 8385 S/A 49 MFT < 5 6.5 – 8.5 1350 *F5 soft modifier/deco binder superior water barrier properties lower blocking resistance

Joncryl® 8386 S/A 40 MFT < 5 7.0 – 9.0 75 *F5 universal binder for exterior joinery, for clear and opaque topcoats, primers and impregnations

modern fine-sized, self-crosslinking, exceptional blocking resistance

Latekoll® D AS 25 2.3 – 3.3 2 – 10 *B1 thickener for coatings, synthetic resin finishes, construction adhesives and nonwoven binders

thickens in the alkaline pH range

Latekoll® DS 6269 PA 29 – 31 30 – 80 *F1 thickener for interior and exterior paints and elastomeric coatings high thickening efficienty, pronounced pseudoplastic (low shear) flow behavior

Latekoll® P PA 97 – 100 2.3 – 3.3 2 – 10 *F2 powder-thickener for interior and exterior paints, builing adhesives, plasters leads to non newtonion viscosity

Luhydran® A 848 S PA 44.5 MFT ~ 39 6.5 – 7.5 150 – 250 *A1 coatings, wood coatings and stains, construction coatings

Lumiten® AQA 10 Water content~ 15*W1

6.0 – 8.0 max. 300 *FB4 additive for alkyd varnishes allows up to 30% water to be mixed in with alkyd paints

Lumiten® EL > 99 3.5 – 4.5 350 *B4 defoamer for adhesives and sealants

Lumiten® E-P 3108 Powder defoamer in dry mixtures prevents lump formation when adding powder mixtures

Lumiten® I-SC 78 5.5 – 7.5 wetting agent

Lumiten® N-OC 30 5.0 – 8.0 interior and exterior paints, fillers wetting agent to better cementitious and calcium oxide stability. Improves storagetime of interior and exterior paints

Lumiten® N-OG Powder 7.0 80 *A5 emulsifier for improving tolerance to cement and lime aids the cleaning of mixing equipment

Luphen® 585 PU 40 TG – 46 7.0 – 9.0 ca. 40 *K12 technical lamination low activation temperature

Luphen® 700 PU 35 – 39 TG 13 7.0 – 9.0 40 – 150 *F2 film-coatings primer and topcoat for plastic films

Luphen® D 200 A PU 40 TG – 46 8.0 – 9.0 20 – 60 *K1 16 700 technical lamination, technical nonwovens low activation temperature

Luphen® D 207 E PU 45 TG – 48 6.5 – 8.5 50 – 180 *K1 40 1000 technical lamination high thermo-dimensional stability

Luphen® D 259 U PU 40 TG – 45 6.0 – 7.0 20 – 120 *K1 1.8 1000 composite film lamination

Luphen® D DS 3548 PU 45 TG – 46 8.0 – 9.5 10 – 70 *K1 20 700 contact adhesives resin modified

Lusolvan® FBH 4 – 8 *A6 coalescents/plasticisers

Lutonal® A 50 (50%) Ethanol 50 5000 – 20000 *A1 soft resins for increasing the adhesion and flexibility of printing inks, cellulose nitrate varnishes and resin varnishes

resistant to saponification



TG/MFT (°C)





Lutonal® A 50 (ca. 70%) hydrotreated light naphtha

68 – 72 soft resin to increase flexibility of printing inks, and wood coatings

Lutonal® I 60 (ca. 80%) Gasoline

80 TG – 27 packaging adhesives polyvinyl isobutyl ether

Lutonal® M 40 100 self adhesive, soft resin to increase flexibility, labeling adhesive for plastic containers

polyvinyl methyl ether

Lutonal® M 40 (50%) Water 50 TG – 49 25 – 200 *A3 packaging adhesives polyvinyl methyl ether

Micronal® DS 5000 X 42 7.5 – 8.5 100 – 300 *B1 liquid phase changing material switching point 26 °C

Micronal® DS 5001 X Powder phase changing material switching point 26 °C



Pigmentverteiler® A 30 7.5 – 9.5 20 – 50 *A7 dispersing agent for organic pigments and fillers in aqueous media

Pigmentverteiler® MD 20 9.0 – 11.0 max. 250 *A10 dispersing agent improves gloss, for organic pigments and fillers in aqueous media, also suitable for aqueous organic systems

Pigmentverteiler® N > 91 6.5 – 8.0 dispersing agent reduces the tendency towards coagulation when pigmenting, for organic pigments and fillers in aqueous media

Pigmentverteiler® NL 35 6.0 – 8.0 80 – 250 *A7 dispersing agent reduces the tendency towards coagulation when pigmenting, for organic pigments and fillers in aqueous media

Pigmentverteiler® S 45 8.0 – 9.0 400 – 750 *A7 dispersing agent improves the shelf life of emulsion paints

Plastilit® 3060 6.5 – 7.5 90 – 98 *A8 plasticizers for dispersions for coatings and jointing compounds based on polyacrylates

Plastilit® 3431 plasticizers for dispersions for dispersion adhesives based on polyacrylates

Saduren® 163 MFH 70 500 – 800 *F4 external crosslinker

Styrofan® D 422 S/B 50 MFT < 1 7.3 – 8.3 30 – 150 *B1 moisture barrier low water absorption, flexible

Styrofan® D 623 S/B 51 MFT 15 – 21 7.8 – 10 35 – 150 *B1 mortar modification for tough mechanical requirements

Styrofan® D 780 S XSB 48 – 50 4.0 – 7.0 15 – 75 *K1 interlinings and high loft waddings excellent wash fasteness and resistance to the solvents used in dry cleaning

Styrofan® D 800 S/B 53,5 TG 40 7.8 – 8.8 110 – 190 *F1 flexible grinding mat good affinity to phenolic resin

Styrofan® D 820 S/B 50 MFT ~ 25 6 – 7 40 – 150 *B1 mortar modification improves stability under load

Styrofan® DS 3492 XSB 48 – 50 TG 0 adhesives for paper lables

Styrofan® ED 830 S/B 50 TG 27 6.0 – 7.0 40 – 150 *F2 hygiene nonwovens based on PET hydrophobic

TC-Binder® LN 550 S PA 50 4.5 – 6.5 50 – 200 interlinings and high loft waddings, flock adhesives, acrylate foam coatings outstanding resistance to solvents such as perchlorethylene

Ultradispers® AB 30 30 9.0 – 10.0 300 – 1500 *A1 dispersing resin for aqueous gloss varnish paints for matte to glossy coatings

Ultradispers® MD 21 45 7.0 – 8.0 4500 *A5 dispersing agent for organic pigments and fillers in coatings for highly filled systems, improves wet grinding

Urecoll® HH odorless HFH 71 8.5 – 9.5 9 – 13 packaging adhesives compatible with methyl cellulose and light dextrins

Urecoll® HM HFH 76 8.5 – 9.5 65 – 90 packaging adhesives suitable for labeling metal packaging

*B1 = DIN EN ISO 3219*B2 = ISO 3219, DIN 53019*B3 = DIN EN ISO 2555*B4 = Brookfield RVT, 20 Upm*B5 = Ubbelohde DIN 51562*B6 = DIN 53018, Brookfield LVT, Sp. 2, 60 min–1*B7 = Brookfied LV, Sp.3 20 Upm ISO 1652*B8 = DIN EN ISO 3219, 250 s–1, 23 °C

*K1 = DIN EN ISO 3219*K2 = ex DIN 53211, 4 mm nozzle*K3 = DIN EN ISO 2555*K4 = Brookfield RVT, 20 Upm*K5 = viscosity at 130 °C

(DIN EN ISO 3219, Appendix B, cone and plate)*K6 = according to Höppler

viscosity at delivery (25°C)*K7 = Brookfield RVT viscosity, Sp. 6/100 rpm/23°,

20% aqueous solution

*K8 = Brookfield RVT viscosity, Sp. 6/50 rpm/23°*K9 = Brookfield RVT viscosity, Sp. 7/100 rpm/23°,

20% aqueous solution *K10 = Brookfield RVT viscosity, Sp. 7/100 rpm/23°*K11 = cone and plate, 130 °C, 100 1/s*K12 = DIN EN ISO 3219, Appendix A

Definition of viscosities




TG/MFT (°C)





Lutonal® A 50 (ca. 70%) hydrotreated light naphtha

68 – 72 soft resin to increase flexibility of printing inks, and wood coatings

Lutonal® I 60 (ca. 80%) Gasoline

80 TG – 27 packaging adhesives polyvinyl isobutyl ether

Lutonal® M 40 100 self adhesive, soft resin to increase flexibility, labeling adhesive for plastic containers

polyvinyl methyl ether

Lutonal® M 40 (50%) Water 50 TG – 49 25 – 200 *A3 packaging adhesives polyvinyl methyl ether





Pigmentverteiler® A 30 7.5 – 9.5 20 – 50 *A7 dispersing agent for organic pigments and fillers in aqueous media

Pigmentverteiler® MD 20 9.0 – 11.0 max. 250 *A10 dispersing agent improves gloss, for organic pigments and fillers in aqueous media, also suitable for aqueous organic systems

Pigmentverteiler® N > 91 6.5 – 8.0 dispersing agent reduces the tendency towards coagulation when pigmenting, for organic pigments and fillers in aqueous media

Pigmentverteiler® NL 35 6.0 – 8.0 80 – 250 *A7 dispersing agent reduces the tendency towards coagulation when pigmenting, for organic pigments and fillers in aqueous media

Pigmentverteiler® S 45 8.0 – 9.0 400 – 750 *A7 dispersing agent improves the shelf life of emulsion paints

Plastilit® 3060 6.5 – 7.5 90 – 98 *A8 plasticizers for dispersions for coatings and jointing compounds based on polyacrylates

Plastilit® 3431 plasticizers for dispersions for dispersion adhesives based on polyacrylates

Saduren® 163 MFH 70 500 – 800 *F4 external crosslinker

Styrofan® D 422 S/B 50 MFT < 1 7.3 – 8.3 30 – 150 *B1 moisture barrier low water absorption, flexible

Styrofan® D 623 S/B 51 MFT 15 – 21 7.8 – 10 35 – 150 *B1 mortar modification for tough mechanical requirements

Styrofan® D 780 S XSB 48 – 50 4.0 – 7.0 15 – 75 *K1 interlinings and high loft waddings excellent wash fasteness and resistance to the solvents used in dry cleaning

Styrofan® D 800 S/B 53,5 TG 40 7.8 – 8.8 110 – 190 *F1 flexible grinding mat good affinity to phenolic resin

Styrofan® D 820 S/B 50 MFT ~ 25 6 – 7 40 – 150 *B1 mortar modification improves stability under load

Styrofan® DS 3492 XSB 48 – 50 TG 0 adhesives for paper lables

Styrofan® ED 830 S/B 50 TG 27 6.0 – 7.0 40 – 150 *F2 hygiene nonwovens based on PET hydrophobic

TC-Binder® LN 550 S PA 50 4.5 – 6.5 50 – 200 interlinings and high loft waddings, flock adhesives, acrylate foam coatings outstanding resistance to solvents such as perchlorethylene

Ultradispers® AB 30 30 9.0 – 10.0 300 – 1500 *A1 dispersing resin for aqueous gloss varnish paints for matte to glossy coatings

Ultradispers® MD 21 45 7.0 – 8.0 4500 *A5 dispersing agent for organic pigments and fillers in coatings for highly filled systems, improves wet grinding

Urecoll® HH odorless HFH 71 8.5 – 9.5 9 – 13 packaging adhesives compatible with methyl cellulose and light dextrins

Urecoll® HM HFH 76 8.5 – 9.5 65 – 90 packaging adhesives suitable for labeling metal packaging

*F1 = DIN EN ISO 2555*F2 = DIN EN ISO 3219*F3 = DIN EN ISO 3219 Appendix A *F4 = DIN EN ISO 3219 B*F5 = (ISO 1652) Brookfield LVT, Sp. 2/30 rpm *F6 = DIN EN ISO 3219; 250 s–1, 23 °C*F7 = DIN EN ISO 3219; 100 s–1, 23 °C

*A1 = DIN EN ISO 3219*A2 = DIN EN ISO 3219, Appendix A*A3 = DIN EN ISO 2555*A4 = ISO 255, Brookfield LV; Sp. 3, 100 upm

*A5 = Brookfield LVT, 60 Upm*A6 = DIN 51562*A7 = DIN 53211*A8 = Ubbelohde 51562*A9 = Brookfield, Sp. 2, 100 rpm, 20 °C*A10 = Brookfield ISO 1652*A11 = DIN EN ISO 3219, 100 s–1

*FB1 = DIN EN ISO 3219*FB2 = DIN EN ISO 2431*FB3 = DIN 532111

PA = pure acrylate A/VAC = acrylate/vinyl acetateS/A = Styrol/AcrylateB/S = Butadiene/StyrolAS = Acrylic AcidPVP = PolyvinylpyrrolidonePU = PolyurethaneS/B = Styrol/ButadienePE = PolyethyleneMEW = Montanester WaxMFH = mMelamine Formaldehyde ResinHFH = Urea-Formaldehyde Resin


Polyvinylpyrrolidon for technical applications (PVP)

1) RTV / Sp. 2/100 Upm2) RTV / Sp. 1/50 rpm 3) RTV / Sp. 6/50 rpm4) RTV / Sp. 6/100 rpm5) RTV / Sp. 7/100 rpm6) LTV / Sp. 4/60 Upm7) ISO 3219, Shear rate: 25 Upm8) RTV / Sp. 5/20 rpm9) Tg: Glass transition temperature


Product* Solidsin %

K-value NVP in %

Comonomersin %

Density in g/m3

Ash content in %

pH value Remaining NVP/ comonomerin ppm

Brookfield viscosity in Pa·s at 23 °C/ in water in %

Absolute humidity (or water content in PVP in % at an air temperature of 23 °C and 75% relative (air) humidity

Mw in kDa(GPC)

Mn in kDa(GPC)

Tg9) in °C(DSC)

Glu

e st

icks

Ho

tmel

t ad

hesi

ves

Mem

bra

nes

Ag

ro

Met

al q

uenc

hing

Po

lym

eriz

atio

n

Thi

cken

ers

Ele

ctro

nic

app

lica-

tio

ns

Fib

ers

Inks

and

pap

er

coat

ing

Cer

amic

ap

plic

atio

ns

Co

atin

gs

Collacral® VAL, Solution 30 50 – 60 hydrophobic modified copolymers 1.05 < 0.02 3.5 – 6.0 < 100 / < 100 1.5 – 2.8 / 30 7) 10 250 40 106

Luvitec® K 17, Powder ≥ 95 15 – 19 100 1.2 < 0.02 3.0 – 7.0 < 100 0.08 – 0.18 / 401) 40 9 2 110

Luvitec® K 30, Powder ≥ 95 27 – 33 100 1.2 < 0.02 7.0 – 9.0 < 100 0.08 – 0.14 / 30 2) 40 50 14 175

Luvitec® K 30, Solution 30 27 – 33 100 1.07 < 0.02 4.0 – 8.0 < 100 80 – 140 / 30 2) 40 50 14 175


Luvitec® K 80, Powder ≥ 95 74 – 82 100 1.2 < 0.02 5.0 – 8.0 < 100 2.5 – 7 / 20 4) 40 850 200 180

Luvitec® K 85, Powder ≥ 95 84 – 88 100 1.2 < 0.02 5.0 – 9.0 < 100 5 – 20 / 20 3) 40 1100 250 180

Luvitec® K 85 CQ, Solution 20 83 – 88 100 1.03 < 0.02 7.0 – 9.0 < 100 5 – 15 / 20 3) 40 1100 250 180

Luvitec® K 90, Powder ≥ 95 88 – 92 100 1.2 < 0.02 5.0 – 9.0 < 100 10 – 25 / 20 5) 40 1400 325 180

Luvitec® K 90 HM, Powder ≥ 95 92 – 96 100 1.2 < 0.02 5.0 – 9.0 < 100 15 – 30 / 20 5) 40 1800 375 180



Luvicross®, Powder ≥ 94 – 98 2 (crosslinker) 1.2 < 0.5 5.0 – 8.0 < 25 / < 5 30 – – 180

Luvitec® VA 64, Powder ≥ 95 26 – 34 60 40 (Vinyl acetate) 1.2 < 0.02 3.8 – 6.0 < 100 / < 300 1 – 3 / 50 6) 15 65 15 105

Luvitec® VA 64 W, Powder 50 26 – 34 60 40 (Vinyl acetate) 1.1 < 0.02 5.0 – 7.0 < 100 / < 300 1 – 3 / 50 6) 15 65 15 105

Luvitec® VPI 55 K 72 W, Solution 20 69 – 75 50 50 (Vinylimidazole) 1.09 < 0.1 7.5 – 8.5 < 50 / < 50 5 – 10 / 20 6) 30 1000 200 180

Luvitec® VPC 55 K 65 W, Solution 30 62 – 68 50 50 (Vinyl caprolactam) 1.06 < 0.02 6.0 – 8.0 < 100 / < 100 8 – 25 / 30 8) 25 750 125 170

PVP glue sticks based on Luvitec© K


Safety instructions

Please note: The specifications in this brochure are based on our current know-ledge and experience. Due to the variety of possible influences when processing and using our product, they do not ex-empt the processor from performing his or her own inspections and tests. Our specifications do not constitute a guaran-tee of certain properties or the suitability of the product for a specific application.

All descriptions, drawings, photo graphs, data, ratios, weights, etc. contained here-in can be changed without notice and do not represent the contractually agreed condition of the product. It is the respon-sibility of the product recipient to observe any protective rights and existing laws and provisions relating to it.

Product* Solidsin %

K-value NVP in %

Comonomersin %

Density in g/m3

Ash content in %

pH value Remaining NVP/ comonomerin ppm

Brookfield viscosity in Pa·s at 23 °C/ in water in %

Absolute humidity (or water content in PVP in % at an air temperature of 23 °C and 75% relative (air) humidity

Mw in kDa(GPC)

Mn in kDa(GPC)

Tg9) in °C(DSC)

Glu

e st

icks

Ho

tmel

t ad

hesi

ves

Mem

bra

nes

Ag

ro

Met

al q

uenc

hing

Po

lym

eriz

atio

n

Thi

cken

ers

Ele

ctro

nic

app

lica-

tio

ns

Fib

ers

Inks

and

pap

er

coat

ing

Cer

amic

ap

plic

atio

ns

Co

atin

gs

Collacral® VAL, Solution 30 50 – 60 hydrophobic modified copolymers 1.05 < 0.02 3.5 – 6.0 < 100 / < 100 1.5 – 2.8 / 30 7) 10 250 40 106

Luvitec® K 17, Powder ≥ 95 15 – 19 100 1.2 < 0.02 3.0 – 7.0 < 100 0.08 – 0.18 / 401) 40 9 2 110

Luvitec® K 30, Powder ≥ 95 27 – 33 100 1.2 < 0.02 7.0 – 9.0 < 100 0.08 – 0.14 / 30 2) 40 50 14 175



Luvitec® K 80, Powder ≥ 95 74 – 82 100 1.2 < 0.02 5.0 – 8.0 < 100 2.5 – 7 / 20 4) 40 850 200 180

Luvitec® K 85, Powder ≥ 95 84 – 88 100 1.2 < 0.02 5.0 – 9.0 < 100 5 – 20 / 20 3) 40 1100 250 180


Luvitec® K 90, Powder ≥ 95 88 – 92 100 1.2 < 0.02 5.0 – 9.0 < 100 10 – 25 / 20 5) 40 1400 325 180

Luvitec® K 90 HM, Powder ≥ 95 92 – 96 100 1.2 < 0.02 5.0 – 9.0 < 100 15 – 30 / 20 5) 40 1800 375 180



Luvicross®, Powder ≥ 94 – 98 2 (crosslinker) 1.2 < 0.5 5.0 – 8.0 < 25 / < 5 30 – – 180

Luvitec® VA 64, Powder ≥ 95 26 – 34 60 40 (Vinyl acetate) 1.2 < 0.02 3.8 – 6.0 < 100 / < 300 1 – 3 / 50 6) 15 65 15 105

Luvitec® VA 64 W, Powder 50 26 – 34 60 40 (Vinyl acetate) 1.1 < 0.02 5.0 – 7.0 < 100 / < 300 1 – 3 / 50 6) 15 65 15 105

Luvitec® VPI 55 K 72 W, Solution 20 69 – 75 50 50 (Vinylimidazole) 1.09 < 0.1 7.5 – 8.5 < 50 / < 50 5 – 10 / 20 6) 30 1000 200 180

Luvitec® VPC 55 K 65 W, Solution 30 62 – 68 50 50 (Vinyl caprolactam) 1.06 < 0.02 6.0 – 8.0 < 100 / < 100 8 – 25 / 30 8) 25 750 125 170


Successful together. Customers from different industries have different requirements and needs. The fact that we focus fully on the specific expectations of each individual customer allows us to produce tailor-made service packages for our clients.

This also includes complementing the innovative BASF products with the products of selected suppliers. If you wish, we also support you in all laboratory and application-related questions.

From the moment your order comes in to the delivery of your goods, we give you more: personal contact, professional service, short delivery times, flexibility and creativity when it comes to meeting your requirements. Your BTC central contacts in the “Dispersions for Adhesives and Construction” division bundle and manage all inquiries and competently advise you on all your commercial and technical needs, directly and with no fuss.

For us, proximity to our customers means that, if you wish, you only have one local contact person, regardless of where you are in Europe and where you need us – our standardized data and information system guarantees processes that are efficient from start to finish.

This allows us to tap new markets together and guarantees that all our products can be used to the best possible effect. We are always by your side: fast, flexible and responsive to your needs.

Coatings for all substrates: walls, ceilings, floors, wood and metal.


Cheadle

Copenhagen

Cologne

LudwigshafenHeadquarter BASF

Paris

Barcelona

Brussels

Milan

BTC for Nordic/BalticBTC Speciality Chemical Distribution A/SVed Stadsgraven 152300 Copenhagen SDenmarkTel. +45 32 66 07 50www.btc-nordic.com

BTC UK/IrelandBTC Speciality Chemical Distribution Ltd.P.O. Box 4Earl Road, Cheadle Hulme, CheadleCheshire, SK8 6QGUnited KingdomTel. +44 161 488 52 23www.btc-uk.com

BTC for Germany/Austria/ Eastern Europe BTC Speciality Chemical Distribution GmbHMaarweg 163/16550825 CologneGermanyTel. +49 221 95 46 40www.btc-de.com

BTC for BeneluxBTC Speciality Chemical Distribution N.V./S.A.Drève Richelle 161 E/FB-1410 WaterlooBelgiumTel.:+32 2 373 22 16www.btc-benelux.com

BTC for France/SwitzerlandBTC Speciality Chemical Distribution SAS49, avenue Georges Pompidou92593 Levallois Perret Cedex (Paris)FranceTel. +33 1 49 64 51 51www.btc-fr.com

BTC for ItalyBTC Speciality Chemical Distribution SpaVia Marconato 820811 Cesano Maderno (MB)ItalyTel. +39 0362 51 21www.btc-it.com

BTC – Your partner for speciality chemicals

Our European offices

BTC for IberiaBTC Speciality Chemical Distribution S.L.Carretera del Medio. 21908907 L‘Hospitalet de Llobregat (Barcelona)SpainTel. +34 93 261 61 00www.btc-es.comwww.btc-pt.com

BTC Speciality Chemical Distribution GmbHMaarweg 163/16550825 [email protected]

® =

reg

iste

red

tra

dem

ark

of

BA

SF

SE

. S

ubje

ct t

o c

hang

e. N

o li

abili

ty a

ccep

ted

fo

r er

rors

.

Documents

Dispersions for Adhesives and Construction€¦ · Dispersions for Adhesives and Construction 3 As experts with many years of experience in the field of polymer dispersions, we …