DISTRIBUTED BY / DISTRIBUÉ PAR · NS-4800-0000-XSE(x-small), NS-4800-0001-SME(small), NS-4800-0002-MDE(medium), NS-4800-0003-LGE(large) NS-4800-0004-XLE(x-large) , NS-4800-0050-XXL(2X-large)

DISTRIBUTED BY / DISTRIBUÉ PAR:

1-866-51-NSTAT(67828) www.nstatesd.com

ESD ADJUSTABLE ELASTIC WRIST STRAP

PART NUMBER: NS-106

SPECIFICATIONS:

Construction: Elastic Nylon with conductive plated threads Width: 19mm

Decay Time Resistivity:

Less than 0.05 sec <1.0x106 +/- 5%

Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord Color: Light Blue Meets or exceeds: DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No. 1-1987, EN10015/1 CORD ASSEMBLYResistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug

Warranty: Warranted for One Year against mechanical and electrical defects. Cord Extension: Full extension greater than 13 feet; Working Length greater than 10 feet.

1-866-51-NSTAT (67828) www.nstatesd.com

ESD ANTI ALLERGIC WRIST STRAP

PART NUMBER: NS-110

SPECIFICATIONS:



Less than 0.05 sec <1.0x106 +/- 5%

Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord Color: Light Blue Feature: Wrist band without metal part, can prevent rashes. CORD ASSEMBLYResistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug



ESD ADJUSTABLE ELASTIC WRIST STRAP

PART NUMBER: NS-300

SPECIFICATIONS:



Less than 0.05 sec <1.0x106 +/- 5%

Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord Color: Green Meets or exceeds: DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No. 1-1987, EN10015/1 CORD ASSEMBLYResistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug


1-866-51-NSTAT(67828) www.nstatesd.com

ESD METAL BAND WRIST STRAP

PART NUMBER: NS-200

SPECIFICATIONS:

Construction: Made from jewelry quality stainless steel, non-rusting, tested to MIL STD 202 Method 101 Thickness: 3.5mm, average weight 33 grams

Manufactured to 130mm circumference with 5 10mm nylon expansion l links Electrical Properties: Outer band: insulated at 500V per unit millimeter, coating is polyurethane based polymer

Inner band: Conductive - <1.0x104 Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord, non rusting, tested to MIL STD 202 Method 101 Color: Black Meets or exceeds: DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No. 1-1987, EN10015/1 CORD ASSEMBLYResistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug Warranty: Warranted for One Year against mechanical and electrical defects. Cord Extension: Full extension greater than 13 feet; Working Length greater than 10 feet.


“D” RING HEEL GROUNDER

PART NUMBER: NS-917RC

SPECIFICATIONS:

Construction: 0.16mm thick, two-layer laminated rubber sole. Inner layer antistatic neoprene, outer black layer is conductive

Neoprene. 1 cm wide, 45cm long nylon ribbon contains 8 electrically conductive yarn

Resistor:

20mm wide black loop material with return hook tip for quick and easy adjustment and operator comfort. ¼ watt, 1meg ohm interior resistor. Sole: black conductive side: 10e3 – 10e5 ohm

Antistatic side: 10e8 – 10e9 ohm Nylon fabric grounding tab: 10e3 – 10e5 ohm

Grounding

1 meg resistor 1 x 10e6 – 10e7 ohm

Resistance: Color: White interior / black Warranty: Warranted for One Year against mechanical and electrical defects.


TOE GROUNDER

PART NUMBER: NS-911R

SPECIFICATIONS:

Construction: Stretch adjustable elastic band for comfort.

1mm Conductive Rubber 1.6mm two layers anti-slip conductive rubber

Resistivity: Color:

Sole: 10e4 – 10e6 ohm / sq Grounding: 10e6 ohm +/- 5% Black

Warranty: Warranted for One Year against mechanical and electrical defects.


ESD WHITE LAB COAT

PART NUMBER: NS-4600 SERIES

SPECIFICATIONS:

Material: 98% Polyester, 2% Carbon Suffused Nylon Type: Surface Resistivity:

4oz. Soil-Release resin finish woven fabric 3.3 x 10e6 Ohm Sq.

Decay Rate:

5000 volts to effective 0 volts in less than .01 seconds

Stitching: Conductive Inner Thread Weight: Wash/wear durability: Color:

152 +/- 5gsm 52 washes with very mild soap White

Sizes: Part number:

X-Small to 2X(other sizes are available on special orders) NS-4600-0010-XSW(x-small), NS-4600-0011-SMW(small), NS-4600-0012-MDW(medium), NS-4600-0013-LGW(large) NS-4600-0014-XLW(x-large) , NS-4600-0015-XXL(2X-large)


ESD BLUE LAB COAT


SPECIFICATIONS:



Decay Rate:



152 +/- 5gsm 52 washes with very mild soap Electric Blue

Sizes: Part number:

X-Small to 2X(other sizes are available on special orders) NS-4700-0000-XSE(x-small), NS-4700-0001-SML(small), NS-4700-0002-MDE(medium), NS-4700-0003-LGE(large) NS-4700-0004-XLE(x-large) , NS-4700-0050-XXL(2X-large)


ESD GREEN LAB COAT


SPECIFICATIONS:



Decay Rate:



152 +/- 5gsm 52 washes with very mild soap Green

Sizes: Part number:

X-Small to 2X(other sizes are available on special orders) NS-4800-0000-XSE(x-small), NS-4800-0001-SME(small), NS-4800-0002-MDE(medium), NS-4800-0003-LGE(large) NS-4800-0004-XLE(x-large) , NS-4800-0050-XXL(2X-large)


ESD BLUE LAB COAT


SPECIFICATIONS:


Soil & Oil release finish 10e5 – 10e6

Decay Rate:



115 +/- 5gsm 100 washes with very mild soap Blue

Sizes: Part number:

X-Small to 2X(other sizes are available on special orders) NS-5000-0000-XSE(x-small), NS-5000-0001-SME(small), NS-5000-0002-MDE(medium), NS-5000-0003-LGE(large) NS-5000-0004-XLE(x-large) , NS-5000-0050-XXL(2X-large)


CONDUCTIVE BLUE TABLE MATTING


SPECIFICATIONS:

Construction: Dual Layer Rubber Material Thickness: Hardness:

2mm , +/- 0.1mm Top Layer 65 , Bottom Layer 66

Tensile Strength: Top Layer 114 kg/. Bottom Layer 112 kg/. Elongation: Top Layer 370% , Bottom Layer 380% Surface Resistivity

Top Layer 10e7 – 10e8 , Bottom Layer 10e4 – 10e5

Static Decay: Resistance to Ground:

5KV – 0KV - less than 0.1 seconds Less than 10e8

Roll Length: 10 meters Roll Width: 24” , 30”, 36” , 48”

Part numbers: NS-50024 ( 24”x 10meters) ,NS-50030 ( 30” x 10meters ),NS-50036 ( 36” x 10meters ),NS-50048 ( 48” x 10meters)

***We can also cut to size***


CONDUCTIVE GREEN TABLE MATTING


SPECIFICATIONS:







Roll Length: 10 meters Roll Width: 24” , 48”

Part numbers: NS-50224 ( 24”x 10meters),NS-50048 ( 48” x 10meters)



CONDUCTIVE GREY TABLE MATTING


SPECIFICATIONS:







Roll Length: 10 meters Roll Width: 24”

Part numbers: NS-50324 ( 24”x 10meters)



THREE LAYER BLUE TABLE MATTING


SPECIFICATIONS:

Material: 3 layer advanced fusion vinyl / foam Electrical Properties:

PTP: <5.5 X 10 @ 10 Volts per EOS / ESD 4.17 10e5 – 10e6 RTG: <5.5 X 107 @ 10 Volts per EOS / ESD 4.1 Surface Resistivity: < 109 per EOS / ESD S11.11

Charge Decay

Conditioning: 50% RH +/- 2% @ 230C +/- 10C for 24 Hours Test conducted @: 50% RH +/- 2% @ 230C +/- 10C. Test results = Time, seconds to decay to 10% of initial charge Results: <2.0 seconds 5000 volts to effective 0 volts in less than .01 seconds

Physical Properties: Part number:

Thickness: 3/8"Colors: Blue NS-601-24 (24” x 50ft) , NS-601-30(30” x 50ft) , NS-601-36(36” x 50ft)


COMMON GROUND POINT

PART NUMBER: NS-53-CPG

SPECIFICATIONS:

Feature: Designed for use at workstations, it provides a common grounding point for one or two wrist straps, as well as table mats and runners. A 3/8” (10mm) stud securely snaps to the mat, and at the other end of the 15 foot cord is a #10 ring terminal


FLOOR MAT “UFO” GROUND

PART NUMBER: NS-2320-008-FMG

SPECIFICATIONS:

Feature: 15’ cord length

# 10 ring terminal Low profile prevents easy disconnect Easily snaps to mat for flush connection


STATIC DISSIPATIVE SEAMLESS GLOVES

NS-NGA220 SERIES NS-NGA221 SERIES

PALM COATED TIP COATED

SPECIFICATIONS:

Construction: Seamless knitted with continuous nylon yarn Features:

Provides non slip and eliminates finger print contamination Pu foam coating provides a super grip and abrasion resistance

Protects from possible damage of product from chloride of sweat Helps protect the product from harmful static electricity Superior grip and offers excellent ventilation Part numbers:

Surface Resistivity: 10e6 – 10e7 NS-NGA220-SML (small ), NS-NGA220-MED(medium), NS-NGA220-LG(large), NS-NGA220-XL(x-large) NS-NGA220-2XL(2x-large) NS-NGA221-SML (small), NS-NGA221-MED(medium), NS-NGA221-LG(large), NS-NGA221-XL(x-large) NS-NGA221-2XL(2x-large)


ESD HIGH TEMPERATURE KAPTON TAPE

PART NUMBER: T-805-AS SERIES

SPECIFICATIONS:

Construction: Low static polyimide ( Kapton ) film Thickness: 2.5mil Substrate: Adhesive to steel:

1mil polyimide film 22 oz/in

Die electric strength

7000 volts

Operating Temp: Up to 600F Elongation at break Tensile strength

60% 32 lbs/in

Length Static charge

36yards Removal from roll less than 150V

Removal from PCB less than 50V Order Part # :

T-805-AS-1/4 (¼” x 36 yards) T-805-AS-1/-2 (½” x 36 yards) T-805-AS-3/4 (¾” x 36 yards) . Call office for more sizes.


ESD HIGH TEMPERATURE MASKING TAPE

PART NUMBER: NS-0938-2

SPECIFICATIONS:

Construction: Crepe paper , natural rubber Thickness:

8 mil

Adhesive Backing:

Natural Rubber Crepe paper

Adhesive to steel: 31 oz/in Tensile strength

32 lbs/in

Temperature:

160 / 180 Celcius, 1 hour

Elongation: 10% Color:

Light yellow

Length: 36 yards Order part # NS-0938-2-1/2 (½” x 36 yards) NS-0938-2-3/4 (3/4” x yards)


ESD FLOOR TAPE

PART NUMBER: NS-2435FL

SPECIFICATIONS:

Construction: Scuff resistant vinyl plastic combined with quick-stick adhesive Width:

3 inch

Length: Appearance:

54 feet Bright yellow vinyl, large black letters


ESD GRID TAPE


SPECIFICATIONS:

Construction: Conductive shielding tape Thickness:

Anti Static adhesive copolymer layer 1 x 10e9 Conductive grid layer 10e4 – 10e5 Anti Static copolymer layer 8x10e12 49 microns

Charge Decay: Peel Adhesion:

0.001 sec. 0.45kg / 15mm minimum

Temp. resistance 60C / 140F maximum Core Size: 3 inch Length

36meters

Order Part # : NS-221-1/4 ( ¼”x 36meters) NS-221-1/2 (1/2 x 36meters ) NS-221-3/4 ( ¾” x 36meters ) NS-221-1 (1”x 36meters)


ESD STATIC AWARENESS LABELS

PART NUMBER: NS-06722

SPECIFICATIONS:

Construction: Yellow tint paper label Adhesive: Dimension:

Low tack adhesive 2.00” x 2.00”

Qty per roll: 1000


ESD STATIC CAUTION LABELS

PART NUMBER: NS-7722

SPECIFICATIONS:

Construction: Yellow tint destructible tamper evident paper label Adhesive: Dimension:

Low tack adhesive 2.00” x 2.00”

Qty per roll: 1000


METAL-IN STATIC SHIELDING BAG

SPECIFICATIONS:

Electrical Properties:

Surface Resistivity Interior: <10e12 ohms/sq using ASTM D257 Exterior:<10e12 ohms/sq using ASTM D257

Metal: 100 ohms Static Shielding < 30volts MIL-PRF-81705,EIA 541 Static Shielding < 10nj EOS/ESD S11.31 Static Decay < 0.05 sec MIL-PRF-81705, FTMS 101 MTH 4046

Physical Properties:

Tensile strength >25lbs ASTM D 882 Seam Strength Pass MIL-PRF-81705

Light Transmission 40% TOBIAS Part numbers:

Temperature range: 250F – 375F , 0.5-3.5 seconds Pressure 30 – 70 PSI Thickness 3.1mil Please call office of a full range of sizes


METAL-OUT STATIC SHIELDING BAG

SPECIFICATIONS:

Electrical Properties:

Surface Resistivity Interior: >10e5 < 10e12 ohms/sq using ASTM D257 Exterior:<10e5 ohms/sq using ASTM D257

Metal: 100ohms Static Shielding < 30volts MIL-PRF-81705,EIA 541 Static Shielding < 10nj EOS/ESD S11.31 Static Decay < 0.05 sec MIL-PRF-81705, FTMS 101 MTH 4046 Charge Retention <100 volts

Physical Properties:

Tensile strength >20lbs ASTM D 882 Seam Strength Pass MIL-PRF-81705

Light Transmission 40% TOBIAS Part numbers:

Temperature range: 250F – 375F , 0.5-3.5 seconds Pressure 30 – 70 PSI Thickness 3.1mil Please call office of a full range of sizes


PINK BAG

SPECIFICATIONS:

Features: Pink Color identifies as pink poly Low charging ( antistatic ) and dissipative Excellent for applications requiring a tougher bag Surface Resistance: < 10e11 ohms Thickness: 2mil and 4 mil Open and Zip lock

Part numbers:

Please call office of a full range of sizes


ESD PAPER

SPECIFICATIONS:

Typical Test Data

Physical:

Base Weight (3000 sq. ft) 20# 40# Caliper (mils) 3.7 – 3.9 6.7 – 6.9

Tear MD/CD 30 / 32 30 / 32 Tensile MD/CD 22 / 14 22 / 14 Sheffield smoothness FS / WS 50 / 50 50 / 50 Brightness (%) 91 91 Opacity (%) 92 92

Resistivity (@ 50% RH) 5 x 10e7 5 x 10e7 Resistivity (@ 20% RH) 6 x 10e9 6 x 10e9 Typical Test Data

Chemical: Standard Sizes:

PH (acid level) 7.02 (neutral) Chloride (CI) < 100ppm Nitrate (NO3) < 10ppm Amine(NH2 – R) < 55ppm Sodium(Na) < 85ppm Sulfate(SO4) < 100ppm 8 ½ x 11 11 x 17 A4 metric Can be supplied blank or pre-printed

Documents

DISTRIBUTED BY / DISTRIBUÉ PAR · NS-4800-0000-XSE(x-small), NS-4800-0001-SME(small), NS-4800-0002-MDE(medium), NS-4800-0003-LGE(large) NS-4800-0004-XLE(x-large) , NS-4800-0050-XXL(2X-large)