DMI - Productos Denon

Denon Ci

Los productos Denon CI están dedicados a instalaciones “a medida” con características que permitan mejorar la satisfacción del cliente

Características zonales & CI en productos Home Cinema

Instalacion “a medida”

Modelos CI

(POA / TU / DVP)

Fundamentos Denon Ci

3

Productos

POA-3012CIAmplificador multizona

TU-604CISintonizador multizona

DVP-602CIProcesador de vídeo HDMI

VENTAJAS• Valor añadido

– Control IP– Monitorizacion remota sobre IP– Actualizaciones futuras

• Escalabiilidad/Expansión– Arquitectura modular y configuración avanzada

• Fiabilidad; desarrollo basado en experiencia de Denon en el mercado CI

• Facilidad de uso; OSD mejorado y configuración web

Características claveConectividad Ethernet

TU-604CI: Configuración Web y presets de backup

(Útil cuando se instalan varios equipos iguales)

POA-3012CI: Configuración via PC y backup de asignación de entradas


Control IP en los tres modelos CI

Esta característica es muy útil para configurar de modo fácil y rápido.

DVP-602CI: Configuración Web y presets de backup


This feature allows a DENON service person or installer to check the unit status and makes settings via the Internet. Benefit for both installer and customer:

•Installer can confirm and control customer’s trouble in their place.

•Customer can fix the trouble immediately according to installer’s guidance.

Installer Customer

Internet

Access & Control

Denon Server

Internet

Log-in and get access information

Register to the server

Mantenimiento RemotoCaracterísticas clave

7

POA-3012CIAvailable now€1680 (ex VAT)

TU-604CIAvailable now€899 (ex VAT)

DVP-602CIAvailable now€2099 (ex VAT)

Price positioning

Product overview

Products Overview• TU-604CI• POA-3012CI• DVP-602CI• Use case examples

Denon TU-604Ci

DENON TU-604CI

Key Features• 6 independent tuner possibility• 2 build in FM/AM Tuners• 4 Expansion slots for Additional

FM/AM or DAB tuners• Independent triggers + master

trigger• Web interface for setup and

remote assistance• IP/RS232 control with easy to

understand RS232 protocol

Front panel

DENON TU-604CI

Power button + Indicator Band mode

button

Tuner Module on/offselection

Functionbuttons

RDSPTPTY

Setupbutton Jog dail/

Push to select

Return/Statusbutton

Memory button Mode

button

DisplayDimmer

Tuning buttons

Tuner on/off indicators

Shift Tuner select

Back Panel

DENON TU-604CI

DAB/FM-AMTuner Expansion slots

Build inFM/AM tuner

Ethernet portRS232port

Remote bus in/out3.5mm jack

Master trigger

Tuner moduleindependent trigger 12v

Tuner moduleIndependent Stereo line out

Tuner modulesFM/AM TUNER module

Specification;– Fm 87.5 – 108.00 MHz– AM 522 – 1611 KHz– Sensitivity FM 1.0 uV– Sensitivity AM 18uV– s/n Stereo 70dB – F-type antenna connector

DENON TU-604CI

Presets and line connectivity are on the TU-604 Ci for each module slot

DENON TU-604CITuner modules

– DAB TUNER module

• Specification;– BandIII

174.928 – 239.200 MHz– Band L

1452.960 – 1490.624 MHz– Sensitivity band III -98dB– Sensitivity band L -94 dB– s/n Stereo 90dB– F-type Antenna connector Presets and line connectivity are on the TU-604 Ci for each module slot

Adding tuner modules

• Power off the unit!• Remove blind covers• Insert the tuner module into the

slots• Fit the screws back to secure

the modules• The modules are immediatly

recognized

Denon POA-3012Ci

Key Features:• 12 channel/6 zone 30W Power output• 6 channel/3 zone 100W power output (Bridge mode)• Mix between Bridged, Stereo and Mono zones• Channel independent triggers• Channel independent line sensing• Channel independent Volume control• Bus line input for party mode purposes• Independent volume control for each channel• Simple defined RS232 protocol• Intuitive Web interface for configuration and remote

assistance

DENON POA-3012CI

19

• Power amplifier module of each pair channel can be easily changed.• Input assign and speaker configuration can bet set for various types of settings

POA3012 modular architecture

DENON POA-3012CI12 channel Multi zone power amplifier

Power buttonwith power indicator

Zone selection

Setup

DisplayUp/down

Jog button with Selection/OK functionActive zone Indication

Channel info /setup guide


Bus line loop out

Bus line in

Ethernetport

Trigger input/zone

RS232 port

Aux input (line in)/channel

Speaker terminal output Mains power

22

High quality digital amplifier : 2 strong individual power transformers

POA3012 performance amp

Amp setupDENON POA-3012CI

Source connected to Bus input

Red = Stereo/zoneGreen = 1 zone bridgedBlue = Mono (BUSl+r)

Channel input configuration


Red = Stereo independent source or channel independent source on aux inputGreen = stereo source /zone via bus line inputBlue = Mono source via Bus line (BUSl+r)

Multi-zone Controller or AVR

FM/AM XM HD Radio DAB

Mono Mono Mono Mono L R L R Bridged L Bridged R

BUS

input

Party Room Kitchen Bed Room Living Room

TU-604CI

POA-3012CI

I/P

I/P

PC Setup, IP control & Remote Status check

Expandability:

Option Slot

Expandability:

Free Assign

Value-added:IP control, etc

Slot Slot Slot Slot Slot Slot

System overview POA & TU

Denon DVP-602Ci

DENON DVP-602CIKey Features• Realta / HQV video processor • HDMI 6-in• HDMI 2-out ( same signal at the same time)• 1- composite, 1- Svideo, 2-component video input• HDMI1.3a, deep color, xvYCC• Up/down-scaling from 480/576P to 1080P• PC resolution output (VESA-6 formats) • Picture adjust for analog and HDMI input• Vertical stretch for cinema scope screen• 3:2 reverse pull-down to 1080P/24Hz• Convert optical audio input to HDMI output• Audio delay control (Lipsync)• Ip/RS-232C, Trigger input, Ir input• Easy understandable RS232 protocol• Web Interface for setup and remote assistance

DENON DVP-602CIFront Panel

Power Button with Indication

Remote sensor

Setup ButtonReturn Button

Cursor Buttons

Enter Button

DENON DVP-602CIBack Panel

2x dig Opt in1x dig opt out 2x HDMI out

Ethernet portMainspower

6x HDMI in

Trigger

Remote in/outRS232port

S-video inComposite video in

2x component input

DENON DVP-602CIConversion table

DENON DVP-602CIConversion table

DENON DVP-602CISpecial video processing

Convert and up-scaling to 1080P/24Hz from DVD materials. (w/o1080P/60 input)

Conditions:– Original contents : Film(24Hz) source– Input signal : converted 60Hz signal with 3:2 pull-down

　　　

Technology Explanation : 3:2 Reverse Pull-Down

Reproduce contents as close as original film

content without Judder.

DENON DVP-602CISpecial video processingTechnology Explanation : 3:2 Reverse Pull-Down

24Hz film source

Detect film cadence in 60Hz signal and delete added pull-down image

3:2 pull-down to 60Hz by player (some judder)

AA AB BC CC DD


Convert wide source(16:9 with black bars) to cinema scope size (2.35:1) using a projectorwith anamorphic lens

DVP-602 : stretch in vertical direction

Lens : stretch in horizontal direction

Full filled image on cinema scope screen

Technology Explanation : Vertical Stretch

DENON DVP-602CI

Cinema scope image on wide (16:9) screen with black bars

Vertical stretch (digital) by DVP-602CI ---> no black bars

Horizontal stretch (optically) by anamorphic lens --->Full filled image on screen

Special video processingTechnology Explanation : Vertical Stretch

DENON DVP-602CISpecial video processingTechnology Explanation : Lip Sync

Some LCD/Plasma Display and projectors have slow display drivers this results in very slow build up video images.

As the video images for this kind of reason are not synchronicwith the audio signal. This often gives weird effects in for example dialogs.

The DVP-602 has the ability to stretch a little on the video output and cut in the Framerate to solve this time delay problem.

DENON DVP-602CISpecial video processingTechnology Explanation : A/V synchronizing

Most older A/V sources like Laserdisc, D-VHS, camcorders or DVD players with DVi-D are almost not possible to connect to latest generation LCD TV set with HDMI.

The DVP-602Ci has got a featuere on which we can sync the digital optical audio in PCM format together with the composite, s-video, component or DVi-D video signal the video signal will be scaled to the desired resolution and the Audio signal will be synchronized accordingly.


Optical outcamcorder

Optical outLaserdisc

S_Video outcamcorder

Component videoout

Laserdisc

HDMiUp to 1080p video outWith Linear PCM audio

Product setup

Product setup• DVP-602CI• TU-604CI• POA-3012CI• Use case examples

III. Setup : DVP-602CIMechanical installation

Weight: 4.2 kgDimensions: (W x H x D) 434 x 107 x 280 mm

Supplied with 19”rackmount kit

III. Setup : DVP-602CIHardware Connectivity: HDMI

SourceDisplay on monitorOut 1

Projector on monitor out 2

HDMIHDMI HDMI

III. Setup : DVP-602CIHardware Connectivity:

Analog video source

Source

Display on monitorOut 1


HDMIHDMI

Component

Dig optical

III. Setup : DVP-602CIHardware Connectivity: DVi

SourceDisplay on monitorOut 1


DVi to HDMI

HDMI HDMIDig optical

III. Setup : DVP-602CIExternal Control connectivity

RS-232C connectorRemote control jacks IN/OUT to receive/send IR signal from/to the zone remote controllersOne Trigger Output to control ON/OFF on an external device.

Network connectivity

Required SystemBroadband Internet Connection•Modem•Router•Ethernet Cable (CAT-5 or greater recommended)•Computer•LAN port

III. Setup : DVP-602CI

III. Setup : TU-604CIHardware installation


Supplied with 19” rackmount kit

III. Setup : TU-604CIHardware connectivity

Independent stereo audio output (RCA) for each zone.

Can be connected directly to a multichannel amplifier like the POA-3012CI or to a matrix switch for audio distribution.

III. Setup : TU-604CIExternal Control connectivity

RS-232C connector•Ethernet port•Remote control jacks IN/OUT to receive/send IR signal from/to the zone remote controllers•One Trigger Output for each zone

(if module is installed)One Master Trigger Output to control ON/OFF on an external device.


III. Setup : TU-604CI


III. Setup : POA-3012CIHardware installation


Supplied with standard rackmount kit

III. Setup : POA-3012CIHardware connectivity

• The POA-3012CI incorporates six sets of 2-channel amplifier from ZONE1 to ZONE6.• The same audio signal can be output from all ZONE or separate signals can be output from each ZONE. • The POA-3012CI also supports BRIDGED output.• Before making the connections, determine the input signals and output signals for each ZONE and

then set up the POA-3012CI in accordance.

Source connected to Bus input

Red = Stereo/zoneGreen = 1 zone bridgedBlue = Mono (BUSl+r)

III. Setup : POA-3012CIHardware connectivity

Normal amplification Bridged amplification

III. Setup : POA-3012CIExternal Control connectivity

•One Trigger Output for each zone•Remote control jacks IN/OUT to receive/send IR signal from/to the zone remote controllers•Ethernet port•RS-232C connector


III. Setup : POA-3012CI


Setup TU-604Ci

Web Interface

DENON TU-604CI

Default is the name of the module Slot

The Web interface can be accessed by entering the provided IP address of the router to the TU-604CIIn the Internet explorer

From here you have the abilityto select between;

- Unit control- Setup menu- Unit rename

Unit Control

DENON TU-604CI

Use this page to control:-Power (ON/OFF)-Tuner (ON/OFF)-Tuner Band (FM/AM or DAB-Frequency-Memory Preset

Via select tuner you can select the module you want to control

Select tuner (module)Select preset and frequency

Display Select memory

Setup Menu

DENON TU-604CI

Assign Preset banks to the Tuner modules

Main Setup

DENON TU-604CI

Select Tuner module to prepare for control.

(FM/AM module or DAB)

Tuner 1 and 2 are FM/AM build in

Setup Menu

DENON TU-604CI

Tuner Preset (A1 to G8) including:

-Memory Preset number

-Radio Band (FM/AM)

- Frequency

DENON TU-604CIOption SetupBasic settings for the general control of the TU-604 CI:

- Dimmer Level (Bright/Dim/Dark/OFF)- Remote ID (1/2/3/4) (set the remote code set for the module)- Remote Lock (ON/OFF) (to avoid remote control)- Setup Lock (ON/OFF) (lock the unit to avoid changes)- RS-232 Power (ON/OFF) ( Enables rs232 control from standby mode)- Firmware Update

DENON TU-604CI

Unit renameUnit Rename

Use this page to change the name of Each tuner modules in the unit.

This is a useful tool to identify the tuner modules in a project

DENON TU-604CISave & LoadSave / Load

Use this pages to save your settings and to restore in case of accidental erasing.

You can also upload settings in another TU-604CI

Your projects are stored in your computer.

Setup POA-3012Ci

DENON POA-3012CI

Web interfaceThe Web interface can be accessed by entering the provided IP address of the Router to the POA-3012 in the Internet Explorer.

Settings as:Channel setup, System setup, Warning and protection data, Audio and signal inputAnd optional settings, can be selected.

DENON POA-3012CI

Channel SetupUse this page to set up:

– Operation Mode (normal or bridged)

– Trigger On Mode (constant, trigger in, audio signal or off)

– Input (bus R, bus L, bus R+L, aux)

– Low Cut Filter (on or off)

– Volume setting

DENON POA-3012CI12 channel Multi zone power amplifier System SetupUse this page to set up:

- Power Configuration (power button, master trigger or off)

DENON POA-3012CI

Warning and Protection Data

- Use this page to control the health of the POA-3012CI. - You can check operation time, overheat and temperature for each zone

DENON POA-3012CI

Audio Signal and Trigger Input

Use this page to control the assignation of the zone audiosignal and trigger in

DENON POA-3012CI

Option SetupUse this page to change the dimmer setting and to launch the firmware update procedure

Dimmer Settings

Firmware update Button

DENON POA-3012CI

Save / Load

Use this pages to save your settings and to restore in case of accidental erasing.You can also upload settings in another POA-3012CI

Setup DVP-602Ci

DENON DVP-602CIMain page SetupThe Web interface can be accessed by entering the provided IP adress of the router to the DVP-602CIIn the Internet explorer

From here you have the abilityto select between;

- Main control- Setup menu- PDA Menu

( dedicated control via connected PDA/ little screen)

DENON DVP-602CI

Main ControlUse this page to set :

- Power (ON/Standby)-Source (HDMI 1 to 6, Comp 1/2, s-video, video)

DENON DVP-602CISource selectUse this page to setup:

- Source (HDMI 1 to 6, Comp 1/2, s-video, video)- IP Scaler (ON/OFF)- Optical IN (Opt 1/2 or None)-Source name

Here you also have the ability to select a dedicated audio input to be set into the HDMI output

DENON DVP-602CIParameterUse this page to adjust:

- Audio Delay- Picture Adjust including :

- Contrast- Brightness- Chroma Level- Hue- DNR- Enhancer- Sharpness

DENON DVP-602CI

HDMI setupUse this page to setup:

- Color Space (YCBr or RGB)- RGB Range (Normal or Enhanced)- Vertical Stretch (ON/OFF)- Audio LipSync (ON/OFF)- Monitor OUT (Auto/Mon1/Mon2)

DENON DVP-602CIOption 1Use this page to setup:

- Source Delete (to adjust the number of source according to the real use- GUI ScreenSaver (ON/OFF)- GUI WallPaper (Picture/Black)- GUI Format (NTSC/PAL)- GUI Text (ON/OFF)

DENON DVP-602CI

Options 2Use this page to setup:

-Trigger Out (ON/OFF) for each source- Monitor Out 1 (ON/OFF)- Monitor Out 2(ON/OFF)

DENON DVP-602CI

Options 3

Use this page to setup:- Dimmer (Bright/Dim/Dark/Off)- Setup Lock (ON/OFF)- Firmware Update

DENON DVP-602CI

Status menuUse this page to display the status of the selected source including:

- Selected source- Name- IP Scaler status

(Shows the scaler settings for the selected source and output)

DENON DVP-602CI

HDMI informationUse this page to display the HDMI status of the selected source including:

- Resolution- Colour space ( 10 or 12 BIT)- Pixel Depth- Monitor 1&2 Interface (indication for which output interface is set) - Monitor 1&2 Supported Resolution (indicates what resolution is provided to the HDMI output)

DENON DVP-602CI

Save and LoadUse this pages to save your settings and to restore in case of accidental erasing.

You can also upload settings in another DVP-602CI

DENON DVP-602CIGraphic user interface

Control

IV. Control: IR Control

TU-604CI and DVP-602CI are controllable by using their supplied remote controllers (model RC1093)

Supplied Remote Controllers

Used with TU-604CI Used with DVP-602CI

DENON TU-604CI6 zone expandable multi tunerRS232 control

Straight connection

Pin1: GND, Pin2: TxD, Pin3: RxD, Pin5: Common (GND)Settings:Communication Speed : 9600bps

Character Length : 8 bitsParity Control : NoneStart Bit : 1 bitStop Bit : 1 bit

Example:STMS*ANFM<CR> : Select analog tuner FM bandTPS*ANUP<CR> : Select tuner preset one position upTMS*ANMANUAL<CR> : Tuning frequency manual mode.

The complete RS232 protocol files are downloadable on the Denon web site:TU-604CI http://www.usa.denon.com/TU604CI-IRCodes_V01.pdf

http://www.usa.denon.com/TU604CI-IRCodes_V01.pdf

RS232 control


Straight connection



Example:SI09BUSL<CR> : Select Input source “BUS L” at channel 9.SO06BRIDGED<CR> : Set Operation Mode to bridged mode at channel 5 & 6.SV02UP<CR> : Master Volume UP at channel 2.

The complete RS232 protocol files are downloadable on the Denon web site:POA-3012CI http://www.usa.denon.com/POA-3012CISerialProtocol_Ver5.1.7.pdf

http://www.usa.denon.com/POA-3012CISerialProtocol_Ver5.1.7.pdf

DENON DVP-602CI

RS232 controlStraight connection



Example:SIHDMI1<CR> : Select Input HDMI1.VSSC72P<CR> : Set resolution video output on 720pPSDELAY UP<CR> : increase audio delay.

The complete RS232 protocol files are downloadable on the Denon web site:DVB-602CI http://www.usa.denon.com/DVP602CI-IRCodes_V01.pdf

http://www.usa.denon.com/DVP602CI-IRCodes_V01.pdf

Estos productos los puede encontrar en

www.venta-visual.com

Documents

DMI - Productos Denon