Embed Size (px)
Citation preview
T: 780.875.1683 | F: 780.875.2728 | BAReng.ca
5237 – 70 Avenue Lloydminster AB, T9V 3N6
OIL & GAS BUILDINGS MUNICIPAL RIGS & CRANES
CORPORATE PROFILE | 2
CONTENTS
3 | ABOUT US
4 | OUR TEAM
6 | OUR SERVICES
8 | METHODOLOGY
10 | CLIENT BENEFITS
11 | SAFETY & LIABILITY INSURANCE
12 | CONTACT US
CORPORATE PROFILE | 3
2016 ABOUT US
Founded in 1981, BAR Engineering focused on heavy oil and gas facility design. Since then, we’ve
expanded and added disciplines to better service the oil and gas sector, while still maintaining a focus
on professional service. Today we are a team of over 80 engineers, technologists, technicians, and
support staff, and are licensed to practice in all four western provinces.
Throughout our multi-disciplinary team, our focus remains on the client. We ensure our team is kept up
to date on the latest education and training to ensure we’re working with the latest standards,
regulations and technology, so we are able to provide the best solution for our client.
We service our clients in these four company pillars:
OIL & GAS BUILDINGS MUNICIPAL RIGS & CRANES
OUR HISTORY
Expanded Oil & Gas Facilities engineering
Electrical & Instrumentation
added
Municipal Engineering established
Acquired Structural Engineering
company
Growth in excess of 230%
BAR Engineering founded
1981 1991 1997 2005 2007 2007- 2014 2014 2015
Break ground on new building that will
accommodate many years of continued growth
Moved into new facility
CORPORATE PROFILE | 4
2016 OUR TEAM
Neil Noble P.Eng.
Principal Engineer and Manager of Oil & Gas
Neil has been practicing engineering for over four decades, starting his career with
Husky Oil Energy. While there, Neil was assigned increasing levels of engineering
management responsibility including heavy oil and thermal production engineering,
heavy oil and gas facility design, project management, and Refinery and Upgrader
engineering leadership. Since joining BAR in 1997, Neil has proven himself to be a
team player. He focuses on the big picture and takes the necessary steps to get there.
A dedicated, reliable, and personable individual who we bet you’ll be calling ‘friend’ by
the end of any project.
Brent Gebhardt P.Eng.
Manager of Structural
Brent is someone you won’t miss in a crowd – and not just because he’s that tall. Brent
has established a diverse skill set with increasing levels of responsibility in a variety of
industries. He started his career in the manufacturing and maintenance industries
where he gained experience with welding and machining processes. He has
experience ranging from mobile equipment to commercial buildings to life safety
components. Brent has served in multiple capacities, progressing from engineering to
Team Lead, earning his way to become the top dog of the Structural Department here
at BAR.
Rick Collins P.Eng.
Manager of Municipal
Rick has been in the industry for over 25 years, in various roles which include
managing engineering project teams and the Director of Planning & Public Works for
the City of Lloydminster. Previously, he took on a major position as Division Manager
for both Lloydminster and Bonnyville offices of an environmental and infrastructure firm,
where he was tasked with the technical aspects and financial operations as well. Upon
joining BAR Engineering ten years ago, Rick has proven himself to be a ‘comedian in
the break room’, and ‘serious in the board-room’ type of worker and an overall pleasure
to be around.
:
CORPORATE PROFILE | 5
2016
Chad Wilson P.Eng.
Manager of Electrical & Instrumentation
Chad, otherwise known as “The Guru” around the office for his expertise, has been
practicing engineering for nearly three decades. Chad has had the pleasure of working
as an IWA contractor, a position that ranged in skills from rebuilding and renovating
lumber facilities, to providing field engineering and operations support for a major gas
transmission company in northern BC. Prior to joining BAR Engineering, Chad was the
acting Team Leader for two major gas plant technical service groups. At BAR, he is a
proven leader. Chad provides day-to-day leadership for electrical, instrumentation, and
automation groups. With his keen leadership and detail-oriented eye, Chad makes the
perfect addition to any team.
Carston Moore
Manager of Mechanical Design & Drafting
With over three decades of experience in design and drafting, and a community-
oriented spirit, Carston a perfect addition to the BAR Engineering team. Prior to joining
BAR in 2008, Carston has worked for a survey company with responsibilities in drafting
and design for 18 years with an additional two years of private contract drafting service
work for numerous clients. Carston is energetic and always eager to take on a new
challenge.
Kent Smith P.Eng.
Managing Director
Passionate, dedicated, community-oriented: Kent is the guy you want in your corner.
Kent first gained great exposure in the construction industry when he worked as a
construction engineer at the Bi-Provincial Upgrader in Lloydminster, Saskatchewan.
Upon completion, he then gained international exposure with his work on the MTBE
Plant in Dubai, United Arab Emirates. Kent joined BAR Engineering upon his return to
Canada and quickly moved up in the Oil & Gas department to his current role as
Managing Director. With Kent’s 25 years plus experience in local and international
engineering stages, his leadership and passion for both the community and the work is
truly exceptional. Kent would make a great addition to any major project.
CORPORATE PROFILE | 6
2016 OUR SERVICES
OIL & GAS ENGINEERING
Heavy Oil Batteries
Heavy Oil Atmospheric Treating Facilities
Primary Production Pad & Test Facilities
Cyclic Steam & SAGD Thermal Pad & Test
Facilities
Emulsion, Gas and Diluent Flowline Systems
Midstream LACT Facilities & Flowline
Systems
Water Transfer Facilities
Gas Compression & Dehydration Facilities
Oilfield Waste Management Facilities
STRUCTURAL ENGINEERING
Commercial, Institutional, Health & Industrial
Wood, Concrete, Masonry & Steel Structures
Foundations
Retaining Structures
Structural Repair & Rehabilitation
Building Code Review Inspections
(Structural & Forensic)
ELECTRICAL ENGINEERING
Power Distribution Planning
Process Control & Power Distribution
Street Lighting Design
Protective Relaying & Coordination Analysis
Isolated Generation Systems Design
Micro Generation Facilities
MUNICIPAL ENGINEERING
Curb, Gutter, Roadway, Drainage
Rural Road Paving
Stormwater Management
Water, Sanitary Sewer, Storm Sewer
Stockpile Measurement
GPS & Total Station
Topographical & Background Survey
Lagoons
Pumping Stations
Land/Property Development
Municipal Rehabilitation
RIGS & CRANES ENGINEERING
Flushby & Service Rig Design
Flushby & Service Rig Modification
Custom Tool Design
Oilfield Equipment Design
Manbasket & Spreader Bar Design
Mobile Catwalk Design
Permanent & Temporary Life Lines
Inspections & Certificates
INSTRUMENTATION/AUTOMATION
Allen-Bradley system integrator
PLC/HMI development & implementation
Site process control development, risk assessment
& detail planning
Site commissioning & start-up support
CORPORATE PROFILE | 7
2016 OTHER SERVICES
DESIGN & DRAFTING
2D Drafting
3D Design & Modeling Utilizing:
AutoCAD
Civil 3D
REVIT
Inventor
PROCAD
CADWorx, and NavisWorks
ETAP (Electrical Transient Analysis)
AG132 Lighting Design Software
PipeFlo
DOCUMENT CONTROL
Document Management
Approve purchasing documents through SAP
Crossing Agreements
Cost Tracking & Reporting
PROJECT MANAGEMENT
Project Scheduling
Project Budgets & Cost Estimates
Regulatory Compliance Support & Licensing
Administration
Procurement Assistance Services
CORPORATE PROFILE | 8
2016 OUR METHODOLOGY
For each project:
We listen to ensure we understand our client’s needs.
In conjunction with the client, define scope of work, confirm
tasks to complete, estimate fees, and establish milestone
timelines.
Finalize contract and sign-off before commencing work.
Assign Project Manager responsible for day-to-day
engineering work and liaison (one key contact).
Our project process:
Data Collection
Sub-consultant Coordination
Design
Internal Peer Review
Client Reviews
Final Design
Tender and Award Contract
Construction and Field Administration
Progress Payment Administration
Other services:
Municipal and Provincial Regulatory/Guideline Review
Review of Funding Issues and Opportunities
Working with Community Planners
:
CORPORATE PROFILE | 9
2016 CLIENT BENEFITS
EXPERIENCE
Senior leaders involved in your projects
Leadership with extensive experience
BAR ENGINEERING TEAM
STRENGTH
Big enough to meet your needs, small enough
to understand and care
EXCEPTIONAL, EVERY TIME
BAR Engineering strives for excellence in
each and every project
Excellence to BAR means Quality, on Time
and on Budget
FULL SERVICE ENGINEERING
Oil & Gas
Municipal
Buildings
Rigs & Cranes
Electrical & Instrumentation
Design & Drafting
QUICK RESPONSE
We’re there when you need us
COMMUNITY PARTNERS
We work with community partners
CORPORATE PROFILE | 10
2016 SAFETY & LIABILITY INSURANCE
BAR ENGINEERING SAFETY POLICY
BAR Engineering is committed to an effective safety program that protects its staff, its property and the
public from accidents. Workers at every level, including shareholders and managers, are responsible
and accountable for the company’s overall safety initiatives. An injury and accident-free workplace is
our goal. Through continuous safety and loss control efforts, we can accomplish this.
CERTIFCATIONS
Alberta Construction Association (ACSA) Certificate of Recognition (COR)
Certificate #20160224 – 4552
ISO 9001 Certified
BAR ENGINEERING IS ISNETWORLD COMPLIANT
LIABILITY INSURANCE
COVERAGE AMOUNT
Professional Liability (E&O) $5,000,000
Automobile Liability $2,000,000
General Liability $5,000,000
2016 CONTACT US
Whether you’re in need of clarification, have a few questions, or just want to chat – we’re here. Please
contact us at one of the methods below and we’ll be happy to connect.
Kent Smith P.Eng
Managing Director | Operations Department
T: 780.875.1683 C: 780.808.4209 F: 780.875.2728
Neil Noble P.Eng
Principal Engineer | Oil & Gas Department
T: 780.875.1683 C: 780.808.9082 F: 780.875.2728
2016
5237 – 70 Avenue Lloydminster AB, T9V 3N6
T: 780.875.1683 F: 780.875.2728
BAReng.ca
OIL & GAS BUILDINGS MUNICIPAL RIGS & CRANES
