12
MOBILE RIGS CATALOG

drill operations

Embed Size (px)

DESCRIPTION

especification of drilling rigs

Citation preview

Page 1: drill operations

MOBILE RIGSCATALOG

Page 2: drill operations

Drillmec "MR series", mobile trailer and self propelled rigs are used for tipical drilling, workover and well serviceapplications. Drillmec covers this variety of applications by manufacturing a full range of rigs capacities from60 up to 200 ton. The drawworks, carrier and mast capacities are combined to provide the best performances.The "MR series", fully mechanically driven rigs, are designed to ensure ease of operation in a wide variety ofextreme terrain and climatic conditions they enable the operator to work in areas requiring all-terrain vehiclessuch as in desert, swamp or jungle conditions and artic tundra.Drillmec rigs are designed to satisfy the needs of quick rig-up and easily transportable unit.

A wide range of substructures are available including slingshot, parallelogram or box type to suit different wellrequirements and drill floor heights.The rigs are manufactured with high strenght material and equipped with heavy duty hydraulic systems capableof providing power for all the hydraulic services.Thanks to the great experience in hydraulic component manufacturing, Drillmec can provide, upon client'srequest, drilling units with hydraulic top drive outfitting.

Drillmec Rigs Standard features:• Driller's control panel is located to provide a clear view of the drill floor areas;• All decks are checkered plate to ensure a safe anti-slipery walking surface in icy or wet conditions;• All rig's components can be designed for operations ranging from - 45 °C up to + 50 °C;• Weather protection on the drill floor area is available;• Optional sound-proof shelter for engine is available;• Optional heater/cooling systems for engine, hydraulic oil and work areas available.

carrier or trailer mountedMASSARENTI design

technical dataMOBILE RIGS

hoisting capacity

ton (lbs x 1000)

nominal engine power

HP (kW)

mast clear height

m (ft)

nominal rating

15” 12” 1/4 10” 5/8

Model Drawworks

Model

70 (155)

85 (187)

113 (250)

136 (300)

160 (350)

180 (400)

200 (440)

299 (223)

550 (410)

550 (410)

650 (485)

800 (596)

800 (596)

950 (710)

32 (96)

35 (115)

35 (115)

35 (115)

36 (118)

36 (118)

36 (118)

940 m

1530 m

1700 m

1870 m

2000 m

2090 m

2250 m

1100 m

1800 m

2000 m

2200 m

2350 m

2460 m

2600 m

MR-3500MR-4000MR-5000MR-6000MR-7000MR-7500MR-8000

1290 m

2120 m

2350 m

2590 m

2760 m

2890 m

3050 m

MR-3500MR-4000MR-5000MR-6000MR-7000MR-7500MR-8000

Page 3: drill operations
Page 4: drill operations

technical dataMR-3500Statick hook load 70 ton (155,000 lbs)

MR-4000Statick hook load 85 ton (187,000 lbs)

Main drum The single/double main drums have the same characteristicsDrum Diameter: D 15" x W 24"Input power: 250 HPMax single line pull: 8,500 kg with Lebus jacket.Spooling capacity: 450 m of 7/8" lineCooling: Circulating waterParmac hydraulic brake ParkersburgAirflex Clutch 24VC650.

Sand line drum Spooling capacity: 1.000 m in 1/2" line.Dimensions: 8 1/2" x 27 1/2"Brake rims: Double rimsCooling: circulating water.

Drawworks option -

Heavy duty 3 Axlesoilfield High resistance I beamsemitrailer Interchangeable 3 1/2" DIA heat treated alloy pin for tractor

fifth wheel3-axles with six single tires for normal and desert conditionsAir operated breaking systemLights and signals according to international standards

Mast Max hook load capacity: 70,000 kg with 6 linesAdjustable monkey board allowing the handlingRange I Double and Range II Single DPMast clear height:18.90 m (62 ft)Stand Pipe 3" OD x 3,000 PSIMonkey board racking capacity: 1,000 m DP range II (single)Static hook load capacity: 70 ton (155.000 lbs)

Power pack Engine: DEUTZ - 508 HP @ 1800 RPMWater-cooled and V 8-cylindersTurbocharging with charge air coolingTransmission: Drillmec concept compound

Rotary table Drillmec: type RT 22 1/2" mechanically drivenFree passage: 26"Static rotary capacity: 55,000 kgVariable: from 0-170 RPM

Substructure Parallelogram folding type.Height adjustable from 2,5 to 3,0 m

Hydraulic system Hydraulic mast erection.and control Hydraulic jacks for mast telescoping

Hydraulic top drive (optional)Four Hydraulic stabilizersDriller’s control panel

Triplex deck -mounted mud pump

Input power: 450 HPDouble Brake rims: D 32" x W 8" de-mountable forged steel.Diameter: 14" x length 25"Lebus grooving for 7/8" lineMax single line pull: 9,000 kg with Lebus jacket.Cooling: Circulating waterOutboard Air Clutches.

Diameter 8 1/2" x length 27 1/2"Spooling capacity: 1,200 m of 1/2" lineDimensions: 8 1/2" x 27"Air clutchesCooling: circulating water.

Hydromatic Parmac 202 brakeLebus groving on either drum

3 AxlesHigh resistance I beamInterchangeable 3 1/2" DIA heat treated alloy pin for tractorfifth wheel3-axles with six single tires for normal and desert conditionsAir operated breaking systemLights and signals according to international standards

Max hook load capacity: 85,000 kg with 6 linesAdjustable monkey board allowing the handlingRange I Double and Range II Single DPMast clear height:18.90 m (62 ft)Stand Pipe 3" OD x 3,000 PSIMonkey board racking capacity: 1,000 m DP range II (single)Static hook load capacity: 85 ton (187.000 lbs)

Engine: DEUTZ w/ 508 HP @ 1900 RPMWater-cooled and V 8-cylindersTurbocharging with charge air coolingTransmission: Drillmec concept compound

Drillmec type: RT 22 1/2" mechanically drivenFree passage: 26"Static rotary capacity: 55,000 kgVariable: from 0-170 RPM

Parallelogram folding typeHeight from 2,5 to 3,0 m

Hydraulic mast erection.Hydraulic jacks for mast telescopingHydraulic top drive (optional)Four Hydraulic stabilizersDriller’s control panel

Model: 8T300Max pressure with 4" liners: 110 bar at 160 SPMHydraulic top drive: (optional)Operator console: tubing drum; engine and transmission controlsFour hydraulic stabilizers

Page 5: drill operations

21 3

MR-3500

Truck mounted Trailer mounted

1 -MR-3500 trailer top view

2 -MR-3500 substructure

3 -MR-3500 on Drillmec’srig-up yard

Figures

drawings

2650

B

1900

0

2231

5

4368

4310

20798

13306250013601360ø1200

1800

34561000

806,5

9452222,3

945 1116 411 761 851

R37

32

550

400

2504

60019

7712

192

1680

148

47

1780

250

2237

8

4955 1760 4240 1450 3526

15919

4577

6000

2300

2544

1728

1728

728

728

2000

2320

2950

1420 1620308,6

Page 6: drill operations

technical dataMR-5000Statick hook load 113 ton (250,000 lbs)

MR-6000Statick hook load 136 ton (300,000 lbs)

Main drum Double drum drawworks Model MR-5000Brake rims: D 42" x W 8" de mountable forged steelInput power: 500 HPDiameter x length 18" x 38"Max single line pull: 17,000 kg with Lebus jacketSpooling capacity: 450 m of 7/8” lineCooling: Forced Circulating waterAirflex Clutch 33 VC 650

Carrier 5 axles Heavy duty off-road type, 60 tons capacityor trailer 3 axles Manufactured with high resistance "I" beams

Electrically welded frameHydraulic leveling jacks for quick balancing on the ground5th axle: mechanical and hydraulic safety blocks on jacks

Sand line drum Max single line pull: 13,000 kg with Lebus grooves.Spooling line capacity: 4,800 m of 9/16" lineCooling: Forced circulating water.

Mast Max hook load capacity: 113 metric tons (250,000 lbs)Mast clear height: 35 m (115 ft)Monkey board racking capacity: 2000 m of 4 1/2"Crown block with 4 sheeves OD 24" and 1 sheave OD 26" for 1"

Drawworks Hydromatic Parmac 202 brakefeatures Lebus grooving on either drum

Power pack Engine: Caterpillar C 15 ACERT diesel with 540 HPTransmission: Automatic Allison Transmission S/M 5610-HTorque converter TC 680Right angle drive with spiral bevel gear caseRotary table clutch: Fawick 20 CB 500

Rotary table Drillmec type: R27.5 (27'' 1/2 opening) and 320 tonStatic rotary capacityDead loading in option: models R17.5 (17,172” opening) and20.5 (20,172” opening)

Substructure Parallelogram folding type. Height adjustable 5,2 m (17’)

Hydraulic system Hydraulic mast erectionand controls Hydraulic jacks for mast telescoping

Hydraulic top drive (optional)Driller control panelFour Hydraulic stabilizers

Substructure in One piece with following dimensions:transport Set Back & Rotary table frameconfiguration Width 2,870 m

Height 3,200 mLength 9,178 m

Anchoring system: self-anchoring system through guy linesand rig pad(Only two anchoring in the ground are required)

Double drum drawworks Model MR-6000Brake rims: D 42" x W 8" de mountable forged steelInput power 540 HPDiameter x lenght: 18" x 38"Max single line pull: 18,000 kg with Lebus jacketSpooling capacity 450 m of 7/8” lineCooling: Forced circulating waterAirflex Clutch 33 VC 650

Heavy duty off road type, 60 tons capacityManufactured with high resistance "I" beamsElectrically welded frameHydraulic leveling jacks for quick balancing on the ground5th axle: mechanical and hydraulic safety blocks on jacks

Max line pull:13.000 kg with Lebus grooves.Spooling line capacity: 4,800 m of 9/16" lineDouble brake rims 42" x 8"Cooling: Forced circulating water.

Max hook load capacity: 136 metric tons (300,000 lbs)Mast clear height: 35 m (115 ft)Monkey board racking capacity: 3000 m of 4 1/2"Crown block with 4 sheaves OD 24" and 1 sheave OD 26" for 1"

Hydromatic Parmac 202 brakeLebus grooving on either drum

Engine: Caterpillar C 15 ACERT diesel with 540 HPTransmission: Automatic Allison Transmission S/M 5610-HTorque converter TC 680Right angle drive with spiral bevel gear case.Rotary table clutch: Fawick 20 CB 500

Drillmec type: R27.5 (27'' 1/2 opening) and 300 tonStatic rotary capacityDead loadingin option: models R17.5 (17'',172 opening) and20.5 (20,172” opening)

Parallelogram folding type. Height adjustable 5,2 m (17’)

Hydraulic mast erectionHydraulic jacks for mast telescopingHydraulic top drive (optional)Driller control panel

One piece with following dimensions:Set Back & Rotary table frame

Width 2,870 mHeight 3,200 mLength 9,178 mAnchoring system: self-anchoring system through guy linesand rig pad(Only two anchoring in the ground are required)

Page 7: drill operations

MR-6000

5 6 74

Figures

4 - Top Drive mounted onMR-8000

5 - MR-8000 with Top Driveand Weather protection

6 - Fast moving substructureon wheels

7 - Power tong

drawings

With foldable substructure

13705

10375 1930

6705

21398 1334

3200

4831

1534

4200 49

8051

9317

113

2587

20775

4547

Page 8: drill operations

technical dataMR-3500 hoist unitStatick hook load 70 ton (155,000 lbs)

MR-6000 hoist unitStatick hook load 136 ton (300,000 lbs)

Main drum The Single/double main drums have the samecharacteristicsDrum diameter: D 15" x W 24"Input power 250 HPMax single line pull: 8,500 kg with Lebus jacketSpooling capacity: 450 m of 7/8" lineCooling: Circulating waterParmac hydraulic brake ParkersburgAirflex Clutch 24 VC 650

Sand line drum Spooling capacity: 1,000 m in 1/2 " line.Dimensions 8 1/2" x 27 1/2"Brake rims: double rimsCooling: Circulating water

Drawworks features Hydromatic Parmac 202 brakeLebus goving on either drum

Oilfield heavy duty 3 Axlessemitrailer High resistance “I” beam

Interchangeable 3 1/2 " DIA heat treated alloy pin fortractor fifth wheel3-axles with six single tires for normal and desert conditionsAir operated breaking systemLights and signals according to international standards

Mast Max hook load capacity: 70,000 kg with 6 lines adjustablemonkey board allowing the handlingRange I double and Range II single DPMast clear height: 18.90 m (62 ft)Stand Pipe 3" OD x 3,000 PSIMonkey board racking capacity: 1,000 m DP range II (single)Static hook load capacity: 70 ton (155,000 lbs)

Power pack Engine: DEUTZ 508 HP @ 1800 RPMWater-cooled and V 8-cylindersTurbocharging with charge air coolingTransmission: Drillmec concept compound

Woking platform Part of the trailer with an adjustable height from 2,5 m to3,0 m.

Hydraulic system Hydraulic mast erectionand control Hydraulic jacks for mast telescoping

Hydraulic top drive (optional)Driller's control panelFour Hydraulic stabilizers

Working platform Adjustable height: From 2,500 mm to 3,000 mmadjustable in height Length & width: 4,800 mm x 1,600 mm

Double drum drawworks Model MR 6000Brake rims: D 42" x W 8" de mountable forged steelInput power: 540 HPDiameter x length 18" x 38"Max single line pull: 18,000 kg with Lebus jacketSpooling capacity: 450 m of 7/8" lineCooling: Forced circulating waterAirflex Clutch 33 VC 650

Max. line pull: 13,000 kg with Lebus groovesSpooling capacity: 2,194 m with 9/16 " line.Dimensions 8 1/2" x 27 1/2"Cooling: Circulating water

Hydromatic Parmac 202 brakeLebus goving on either drum

Heavy duty off-road type, 60 tons capacityManufactured with high resistance "I" beamsElectrically welded frameHydraulic levelling jacks for quick balancing on the ground5th axle: mechanical and hydraulic safety blocks on jacks

Max hook load capacity 136 metric tons (300,000 lbs)Mast clear height: 35 m (115 ft)Monkey board racking capacity: 3,000 m of 4 1/2"Crown block with 4 sheeves OD 24" and 1 sheave OD 26"for 1"

Engine: Caterpillar C 15 ACERT diesel with 540 HPTransmission: Automatic Allison Transmission S/M 5610 -HTorque converter TC 680Right angle drive with spiral bevel gear caseRotary table clutch: Fawick 20 CB 500

Very light and adjustable in height.

Hydraulic mast erectionHydraulic jacks for mast telescopingHydraulic top drive (optional)Driller's control panelFour Hydraulic stabilizers

Height Width LengthLow 1,500 mm 9,530 mm 7,849 mmMedium 2,880 mm 12,290 mm 7,364 mmHeigh 1,500 mm 9,530 mm 6,087 mm

Page 9: drill operations

12 13 14

Figures

12 - Working platform(for hoist unit)

13 - MR-6000 carrier pullingunit with working platform

14 - MR-6000 carrier pullingunit on mud boats

Page 10: drill operations

technical dataMR-7000Statick hook load 160 ton (350,000 lbs)

MR-8000Statick hook load 200 ton (440,000 lbs)

Main drum Double drum drawworks Model MR-7000Brake rims: D 46" x W 8" de mountable forged steelInput power 1080 HPMax single line pull: 24,000 kg with Lebus jacketSpooling capacity 700 m (2,300 ft) of 1 1/8" wirelineCooling: Forced circulating waterAirflex Clutch 42 VC 650

Sand line drum Max. line pull: 13,000 kg with Lebus groovesSpooling capacity: 7,000 m (23,000 ft) with 9/16 " line.Brake rims D 38" x 7" e mountable forged steelCooling: circulating water

Drawworks features Hydromatic Parmac V80 brake with water circulation systemLebus goving on either drums

Carrier 6 axles or Heavy duty off-road type, 70 tons capacityTariler 4 axels Manufactured with high resistance "I" beamsAll Oilfield Heavy duty Electrically welded frame

Hydraulic levelling jacks for quick balancing on the ground6th axle: mechanical and hydraulic safety blocks on jacks(on Carrier Version)

Mast Max hook load capacity: 160 metric tons (350,000 lbs)Mast clear height: 36 m (118 ft)Monkey board for Double Drill Pipes (18 m)Crown block with 5 sheeves OD 30" for 1 1/8”

Power pack Engine: Caterpillar C 15 ACERT diesel with 540 HPTransmission: Automatic Allison Transmission S/M 5610 H/ARTorque converter TC 680Right angle drive with spiral bevel gear caseRotary table clutch: 20 CB 500

Rotary table Drillmec model: R27.5 (27 1/2" opening)Static rotary capacity : 320 tonDead loading in option: models R17.5 (17 172 " opening)and 20.5 (20 172 " opening)

Substructure Parallelogram folding typeHeight adjustable from 5,2 m (17')

Hydraulic system Hydraulic mast erectionand control Hydraulic jacks for mast telescoping

Hydraulic top drive (optional)Driller's control panelFour hydraulic stabilizers

Substructure in One piece with the following dimensionstransport Set back Rot. table frameconfiguration Width 2,500 m 2,5 (8’)

Height 2,040 m 2,26 (7’5”)Length 12,500 m 12,5 (41’)Anchoring system: self-anchoring system through guylines and rig pad(Only two anchoring in the ground are required)

Double drum drawworks Model MR-6000Brake rims: d46" x W 8" de mountable forged steelInput power 1080 HPMax single line pull: 24,000 kg with Lebus jacketSpooling capacity 700 m (2,300 ft) of 1 1/8" wirelineCooling: Forced circulating waterAirflex Clutch 42 VC 650

Max. line pull: 13,000 kg with Lebus groovesSpooling capacity: 4,800 m with 9/16 " line.Dimensions rims D 38” x 7” e mountable forged steelCooling: circulating water

Hydromatic Parmac V80 brake with water circulation systemLebus goving on either drums

Heavy duty Off-Road type, 70 tons capacityManufactured with High resistance "I" beamsElectrically welded frameHydraulic levelling jacks for quick balancing on the ground6th axle: mechanical and hydraulic safety blocks on jacks(on Carrier Version)

Max hook load capacity 200 metric tons (440.000 lbs)Mast clear height: 36 m (118 ft)Monkey board rfor Double Drill Pipes (18 m)Crown block with 5 sheeves OD 36" and 1 sheave OD 20"for 1 1/8"

Engine: Two Caterpillar C 15 ACERT diesel with 1080 HP (540 HP each)Transmission: Automatic Allison Transmission S/M 5610 H/ARTorque converter TC 680Right angle drive with spiral bevel gear caseRotary table clutch: Fawick 20 CB 500

Drillmec model R27.5 (27 1/2" opening)Static rotary capacity : 320 tonDead loading in option: models R17.5 (17 172 " opening)and 20.5 (20 172 " opening)

Parallelogram folding typeHeight adjustable from 5,2 m (17')

Hydraulic mast erectionHydraulic jacks for mast telescopingHydraulic top drive (optional)Driller's control panelFour hydraulic stabilizers

One piece with the following dimensionsSet back Rot. table frame

Width 2,500 m 2,5 (8’)Height 2,040 m 2,26 (7’5”)Length 12,500 m 12,5 (41’)Anchoring system: self-anchoring system through guy linesand rig pad(Only two anchoring in the ground are required)

Page 11: drill operations

15 16 17

Figures

15 - MR-8000 equipped withTop drive system

16 - MR-7000 trailer to view

17 - MR-8000 (Carrier version)rigged up on jobsite

Page 12: drill operations

commercial networkSOILMEC S.p.A. - Beijing Repr. Office - P.R. CHINA

SOILMEC MISR. S.A.E. CO. - Cairo EGYPT

SOILMEC EMIRATES L.L.C. - Dubai U.A.E.

SOILMEC GULF FZCO - Dubai U.A.E.

DRILLMEC INC. - Conroe, Texas U.S.A.

SOILMEC JAPAN CO. LTD. - Tokyo JAPAN

SOILMEC (H.K.) LIMITED - HONG KONG

SOILMEC FAR EAST PTE. LTD. - SINGAPORE

SOILMEC LTD. - Peterbourgh U.K.

SOILMEC FRANCE - Saint-Aubin sur Gaillon (France)

DRILLMEC ENGINEERING CO. LTD. - Khartoum SUDAN

12, via 1° Maggio

29027 Gariga di Podenzano

PIACENZA (Italy)

Tel. +39.0523.354211

Fax +39.0523.524418 / 524012

web site: www.drillmec.come-mail: [email protected]

10/2

007-

1500

-D/F

-Cils

-Il D

igita

le

Drillmec continuously improvesits products, therefore technicalspecifications are nominal andsubject to change.

Drillmec quality management system is certified byAPI (American Petroleum Institute) and DNV(Det Norske Veritas) and GOST-R (Russianapproval) for special products

certified quality system

a company