• Home

  • Documents

  • Dynapac CA305 - NEES presentation.pdfDynapac CA305 Single drum vibratory rollers Technical data...
2
Dynapac CA305 Single drum vibratory rollers Dynapac CA305 Single drum vibratory rollers Technical data Masses Operating mass (incl. Canopy) 11000 kg Module mass (front/rear) 6450 kg/4550 kg Dimensions Drum width 2130 mm Compaction Static linear load 30.3 kg/cm Nominal amplitude (high/low) 1.8 mm/0.9 mm Vibration frequency (high/low amplitude) 33 Hz/33 Hz Centrifugal force (high/low amplitude) 250 kN/130 kN Engine Manufacturer/Model KOEL Type Water cooled Rated power (rating standard) BS-III Rated power, SAE J1995 105 hp @ 2200 rpm Fuel tank capacity 280 l Traction Speed range 0-5.5 km/h (working) 0-11 km/h (travel) Theor. gradeability 34 % Vertical oscillation ±9° Find us locally at www.dynapac.com We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines. The above information is a general description only, all informations are supplied without liability. dynapac_ca305_en-20190207.114019.pdf 2019-02-07 11:40

Dynapac CA305 - NEES presentation.pdfDynapac CA305 Single drum vibratory rollers Technical data Dimensions € A. Wheelbase 2990 mm € B1. Width, front 2260 mm € B2. Width, rear

  • Upload
    others

  • View
    8

  • Download
    0

Embed Size (px)

Citation preview

  • Dynapac CA305Single drum vibratory rollers

    Technical data

    Masses

    Operating mass (incl. Canopy) 11000 kg

    Module mass (front/rear) 6450 kg/4550 kg

    Dimensions

    Drum width 2130 mm

    Compaction

    Static linear load 30.3 kg/cm

    Nominal amplitude (high/low) 1.8 mm/0.9 mm

    Vibration frequency (high/low amplitude) 33 Hz/33 Hz

    Centrifugal force (high/low amplitude) 250 kN/130 kN

    Engine

    Manufacturer/Model KOEL

    Type Water cooled

    Rated power (rating standard) BS-III

    Rated power, SAE J1995 105 hp @ 2200 rpm

    Fuel tank capacity 280 l

    Traction

    Speed range 0-5.5 km/h (working) 0-11 km/h (travel)

    Theor. gradeability 34 %

    Vertical oscillation ±9°

    Dynapac CA305Single drum vibratory rollers

    Technical data

    Masses

    Operating mass (incl. Canopy) 11000 kg

    Module mass (front/rear) 6450 kg/4550 kg

    Dimensions

    Drum width 2130 mm

    Compaction

    Static linear load 30.3 kg/cm

    Nominal amplitude (high/low) 1.8 mm/0.9 mm

    Vibration frequency (high/low amplitude) 33 Hz/33 Hz

    Centrifugal force (high/low amplitude) 250 kN/130 kN

    Engine

    Manufacturer/Model KOEL

    Type Water cooled

    Rated power (rating standard) BS-III

    Rated power, SAE J1995 105 hp @ 2200 rpm

    Fuel tank capacity 280 l

    Traction

    Speed range 0-5.5 km/h (working) 0-11 km/h (travel)

    Theor. gradeability 34 %

    Vertical oscillation ±9°

    Find us locally at www.dynapac.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    dynapac_ca305_en-20190207.114019.pdf 2019-02-07 11:40

    https://dynapac.com/en/contact

  • Dynapac CA305Single drum vibratory rollers

    Technical data

    Dimensions

    A. Wheelbase 2990 mm

    B1. Width, front 2260 mm

    B2. Width, rear 2130 mm

    D. Drum diameter 1500 mm

    K1. Ground clearance 520 mm

    K2. Curb clearance 460 mm

    L. Length 5600 mm

    O1. Overhang, right 65 mm

    O2. Overhang, left 65 mm

    R1. Turning radius, outside 5515 mm

    R2. Turning radius, inside 3385 mm

    S. Drum shell thickness 25 mm

    W. Drum width 2130 mm

    α. Steering angle ±38°

    Dynapac CA305Single drum vibratory rollers

    Technical data

    Dimensions

    A. Wheelbase 2990 mm

    B1. Width, front 2260 mm

    B2. Width, rear 2130 mm

    D. Drum diameter 1500 mm

    K1. Ground clearance 520 mm

    K2. Curb clearance 460 mm

    L. Length 5600 mm

    O1. Overhang, right 65 mm

    O2. Overhang, left 65 mm

    R1. Turning radius, outside 5515 mm

    R2. Turning radius, inside 3385 mm

    S. Drum shell thickness 25 mm

    W. Drum width 2130 mm

    α. Steering angle ±38°

    Find us locally at www.dynapac.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    dynapac_ca305_en-20190207.114019.pdf 2019-02-07 11:40

    https://dynapac.com/en/contact

Sliding shutter systems - EHRET GmbH...13 (1) min. Breite 650 mm ab Höhe 2000 mm | min. width 650 mm from height 2000 mm (2) min. Breite 850 mm ab Höhe 3000 mm | min. width 850 mm

Sliding shutter systems - EHRET GmbH...13 (1) min. Breite 650 mm ab Höhe 2000 mm | min. width 650 mm from height 2000 mm (2) min. Breite 850 mm ab Höhe 3000 mm | min. width 850 mm

Documents
MATERIALFLOW AND FATORY EQUIPMENT SUPERMARKET€¦ · one after another trolley attributes manufacturer item number/ type description length mm width mm track width mm wheel diameter

MATERIALFLOW AND FATORY EQUIPMENT SUPERMARKET€¦ · one after another trolley attributes manufacturer item number/ type description length mm width mm track width mm wheel diameter

Documents
technical data - ECEUKCasing Colour Daikin White Material Painted galvanized steel plate Dimensions Unit Height mm 1,680 Width mm 635 930 Depth mm 765 Packing Height mm 1,855 Width

technical data - ECEUKCasing Colour Daikin White Material Painted galvanized steel plate Dimensions Unit Height mm 1,680 Width mm 635 930 Depth mm 765 Packing Height mm 1,855 Width

Documents
repositorio.uac.ptgreatest width very slightly before anterior third. Total length: 0.56 - 0.62 mm, LP = 0.60 mm; total width 0.73 - 0.81 mm, Wp = 0.77 mm. Anterior sides curved, fore

repositorio.uac.ptgreatest width very slightly before anterior third. Total length: 0.56 - 0.62 mm, LP = 0.60 mm; total width 0.73 - 0.81 mm, Wp = 0.77 mm. Anterior sides curved, fore

Documents
CA305 - Electrical Supply in Building_bm

CA305 - Electrical Supply in Building_bm

Documents
1 Width: 72 mm Stitches: 3 879 Height: 145 mm 1€¦ · Height: 166 mm Width: 66 mm Gütermann Sulky Robison - Anton Stitches: 6 219 Height: 60 mm 9 Width: 60 mm 1 1813 2426 2 1231

1 Width: 72 mm Stitches: 3 879 Height: 145 mm 1€¦ · Height: 166 mm Width: 66 mm Gütermann Sulky Robison - Anton Stitches: 6 219 Height: 60 mm 9 Width: 60 mm 1 1813 2426 2 1231

Documents
TIMING BELT PULLEYS - MECTROL...Standard Minimum Pulley Width Belt Pulley Width Nominal Belt Pitch Designation Width flanged Unflanged b'f In mm In mm In mm XL 037 .375 9.7 0.41 10.4

TIMING BELT PULLEYS - MECTROL...Standard Minimum Pulley Width Belt Pulley Width Nominal Belt Pitch Designation Width flanged Unflanged b'f In mm In mm In mm XL 037 .375 9.7 0.41 10.4

Documents
 · PPGL COVERED WIDTH - 980 mm SUPPLY WIDTH - 1060 mm MANGALORE TILE PROFILE Thickness (TCTP in mm) Effective Cover Width (mm) Wath (rm) Pitch (mm) Crest Height (nl-n) Length (ft)

 · PPGL COVERED WIDTH - 980 mm SUPPLY WIDTH - 1060 mm MANGALORE TILE PROFILE Thickness (TCTP in mm) Effective Cover Width (mm) Wath (rm) Pitch (mm) Crest Height (nl-n) Length (ft)

Documents
thermoweldable CONVEYOR BELTS...Flat belt Conveyor belt Belt thickness Maximum width Minimum drum ø Weight width < 100mm width >_ 100mm (mm) (mm) (mm) (kg / m 2 ) DRBI1.51.5

thermoweldable CONVEYOR BELTS...Flat belt Conveyor belt Belt thickness Maximum width Minimum drum ø Weight width < 100mm width >_ 100mm (mm) (mm) (mm) (kg / m 2 ) DRBI1.51.5

Documents
AMF-BRUNS LINEARLIFT AL1 PANORAMA · 2018. 10. 11. · TYPE AL1 1200 AL1 1400 Width 1.200 mm 1.200 mm Depth 350 mm 350 mm Height 1.125 mm 1.125 mm Useable paltform size Width 755

AMF-BRUNS LINEARLIFT AL1 PANORAMA · 2018. 10. 11. · TYPE AL1 1200 AL1 1400 Width 1.200 mm 1.200 mm Depth 350 mm 350 mm Height 1.125 mm 1.125 mm Useable paltform size Width 755

Documents
folia.paru.cas.cz0.729—0.890 mm, maximum width 0.081 to 0.094 mm. Length of posterior glandul- ar part of ocsophagus 3.56—4.45 mm, maximum width 0.142—0.160 mm

folia.paru.cas.cz0.729—0.890 mm, maximum width 0.081 to 0.094 mm. Length of posterior glandul- ar part of ocsophagus 3.56—4.45 mm, maximum width 0.142—0.160 mm

Documents
By: Jahnavi Kothari 7.2. Eye Width=30 mm Width of bridge of nose=30 mm Bridge Width=20 mm Width of mouth when you smile=37 mm Mouth Width=45

By: Jahnavi Kothari 7.2. Eye Width=30 mm Width of bridge of nose=30 mm Bridge Width=20 mm Width of mouth when you smile=37 mm Mouth Width=45

Documents
AND ENDURANCE - Evergem · 2019. 3. 11. · AR07 AR07C width (mm) width (mm) 1250 width (mm) 1250 width (mm) 1250 width (mm) 1250 width (mm) 1100 width (mm) 1100 width (mm) PASSENGER

AND ENDURANCE - Evergem · 2019. 3. 11. · AR07 AR07C width (mm) width (mm) 1250 width (mm) 1250 width (mm) 1250 width (mm) 1250 width (mm) 1100 width (mm) 1100 width (mm) PASSENGER

Documents
NINA HOT · 2017. 11. 28. · NINA1 Height: 487.5 mm Width: 160 mm Depth: 380 mm Weight 15kg NINA2 Height: 487.5 mm. Width: 280 mm. Depth: 387.5 mm. NINA3 Height: 520 mm. Width: 420

NINA HOT · 2017. 11. 28. · NINA1 Height: 487.5 mm Width: 160 mm Depth: 380 mm Weight 15kg NINA2 Height: 487.5 mm. Width: 280 mm. Depth: 387.5 mm. NINA3 Height: 520 mm. Width: 420

Documents
2019 mediadaten vw english - VVW GmbH · BASiC FORMAtS iNgAtE PRiNt AREA Advertisement prices description width in mm height in mm width in mm height in mm Price 1 / 1 page 210 mm

2019 mediadaten vw english - VVW GmbH · BASiC FORMAtS iNgAtE PRiNt AREA Advertisement prices description width in mm height in mm width in mm height in mm Price 1 / 1 page 210 mm

Documents
UXP410 Thermal Transfer Facsimile EnglishManual feeding: Width: 148 to 210 mm Length: 140 to 600 mm Effective scanning width 210 mm max. Effective printing width 204 mm max. Contrast

UXP410 Thermal Transfer Facsimile EnglishManual feeding: Width: 148 to 210 mm Length: 140 to 600 mm Effective scanning width 210 mm max. Effective printing width 204 mm max. Contrast

Documents
V BAATI · Effective Width Cover: 1,015 mm ± 5 mm Length/Square Meter: 1,082 mm EFFECTIVE WIDTH mm ± 5 mm OVERALL WIDTH mm ± 5 mm height (28 mm ± 1 mm) Fixin Procedure Recommended

V BAATI · Effective Width Cover: 1,015 mm ± 5 mm Length/Square Meter: 1,082 mm EFFECTIVE WIDTH mm ± 5 mm OVERALL WIDTH mm ± 5 mm height (28 mm ± 1 mm) Fixin Procedure Recommended

Documents
poster content width 790 mm length 1140 mm - exsa.hu · PDF filepaper size width 830 mm length 1180 mm poster content width 790 mm length 1140 mm

poster content width 790 mm length 1140 mm - exsa.hu · PDF filepaper size width 830 mm length 1180 mm poster content width 790 mm length 1140 mm

Documents
Figure 1: PulseRider Device (not to scale) › cdrh_docs › pdf16 › H160002C.pdfCatalog Number Target Aneurysm Neck Width (mm) Parent Vessel Diameter (mm) Implant Arch Width (mm)

Figure 1: PulseRider Device (not to scale) › cdrh_docs › pdf16 › H160002C.pdfCatalog Number Target Aneurysm Neck Width (mm) Parent Vessel Diameter (mm) Implant Arch Width (mm)

Documents
Liebherr in the United States - Liebherr · Weight* kg 457 Width mm 2050 4 LR 1200 Weight kg 14500 Width mm 1660 Weight kg 16300 Width mm 1660 Weight kg 9800 Width mm 3340 Weight

Liebherr in the United States - Liebherr · Weight* kg 457 Width mm 2050 4 LR 1200 Weight kg 14500 Width mm 1660 Weight kg 16300 Width mm 1660 Weight kg 9800 Width mm 3340 Weight

Documents
CIPARALL SLIDING BEARING - Calenberg · Corbel dimensions Minimum support width a: 257 mm Rounded support width a: 260 mm Support width a: 300 mm Bearing Design Compressive stress

CIPARALL SLIDING BEARING - Calenberg · Corbel dimensions Minimum support width a: 257 mm Rounded support width a: 260 mm Support width a: 300 mm Bearing Design Compressive stress

Documents
10-TOOLS+ADLER - IGF EuropeADLER-LOW RES.pdf · 18214Y Wedge lever A.S., beech, width 70 mm 18215Z Wedge lever A.S., plastic, width 65 mm Wedge lever, plastic, width 65 mm 18650X

10-TOOLS+ADLER - IGF EuropeADLER-LOW RES.pdf · 18214Y Wedge lever A.S., beech, width 70 mm 18215Z Wedge lever A.S., plastic, width 65 mm Wedge lever, plastic, width 65 mm 18650X

Documents
thermoweldable CONVEYOR BELTS - Belting Edge€¦ · Flat belt Conveyor belt Belt thickness Maximum width Minimum drum ø Weight width < 100 mm width >_ 100 mm (mm) (mm) (mm)

thermoweldable CONVEYOR BELTS - Belting Edge€¦ · Flat belt Conveyor belt Belt thickness Maximum width Minimum drum ø Weight width < 100 mm width >_ 100 mm (mm) (mm) (mm)

Documents
DOW™ Ultrafiltration – Product Manual - Inaqua · 2017. 9. 1. · Diameter - D 165 mm 6.5" 225 mm 8.9" 225 mm 8.9" Width – W1 125 mm 4.9" 180 mm 7.1" 180 mm 7.1" Width – W2

DOW™ Ultrafiltration – Product Manual - Inaqua · 2017. 9. 1. · Diameter - D 165 mm 6.5" 225 mm 8.9" 225 mm 8.9" Width – W1 125 mm 4.9" 180 mm 7.1" 180 mm 7.1" Width – W2

Documents
ABOUT USALUMINIUM / STAINLESS STEEL CONVEYOR SYSTEMS MS2 MM3 83 mm 85 mm ML2 140 mm 145 mm MX2 220 mm 225 mm PLnSTlC CHAIN CONVEYOR Chain width Beam width Engineered Solutions 63 …

ABOUT USALUMINIUM / STAINLESS STEEL CONVEYOR SYSTEMS MS2 MM3 83 mm 85 mm ML2 140 mm 145 mm MX2 220 mm 225 mm PLnSTlC CHAIN CONVEYOR Chain width Beam width Engineered Solutions 63 …

Documents
Aesculap MINOP InVent · MINOP® InVent dissector, tip width 1.7 mm MINOP® InVent dissector, tip width 1.0 mm MINOP® InVent hook 90° blunt, hook deflection width 3.5 mm MINOP®

Aesculap MINOP InVent · MINOP® InVent dissector, tip width 1.7 mm MINOP® InVent dissector, tip width 1.0 mm MINOP® InVent hook 90° blunt, hook deflection width 3.5 mm MINOP®

Documents
PIEZOSURGERY® MEDICAL SURGICAL INSERTS · Operative length: 3 mm Saw width: 3.5 mm Saw thickness: 0.8 mm → MT6S-10 Osteotomy microsaw Operative length: 10 mm Saw width: 4 mm Saw

PIEZOSURGERY® MEDICAL SURGICAL INSERTS · Operative length: 3 mm Saw width: 3.5 mm Saw thickness: 0.8 mm → MT6S-10 Osteotomy microsaw Operative length: 10 mm Saw width: 4 mm Saw

Documents
FFS Machines FS Machines€¦ · EF400 TECHNICAL DATA ø 1200 11730 3030 Cup material width 466 mm* Draw off length 300 mm Usable width 446 mm* Forming depth 100 mm * +60 mm with

FFS Machines FS Machines€¦ · EF400 TECHNICAL DATA ø 1200 11730 3030 Cup material width 466 mm* Draw off length 300 mm Usable width 446 mm* Forming depth 100 mm * +60 mm with

Documents
LINEAR SLOT DIFFUSERS - technalco · 2019. 7. 13. · 1) Model ‘TL’ : 16 mm slot width 2) Model ‘TM’ : 20 mm slot width 3) Model ‘TH’ : 25 mm slot width More than 8 slots

LINEAR SLOT DIFFUSERS - technalco · 2019. 7. 13. · 1) Model ‘TL’ : 16 mm slot width 2) Model ‘TM’ : 20 mm slot width 3) Model ‘TH’ : 25 mm slot width More than 8 slots

Documents
PITCH SPECIFICATIONS SUPER FLEX BELTS · TRULY ENDLESS FLEX BELTS AT10-HF | Pitch: 10 mm Specifications Standard Colour White Width Tolerance up to 50 mm Width > 50 mm Width ± 0.5

PITCH SPECIFICATIONS SUPER FLEX BELTS · TRULY ENDLESS FLEX BELTS AT10-HF | Pitch: 10 mm Specifications Standard Colour White Width Tolerance up to 50 mm Width > 50 mm Width ± 0.5

Documents