E ELECTRICAL BATTERY ACCESSORIES...E 6 = Std. Carton Qty. 139 ELECTRICAL In Section E: Meters/Testers Wiring Fuses 12V Accessories Battery Accessories Chargers & Inverters Cords &

E

138

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

ELECTRICAL

• Make-before-break contact design allows switching between battery banks without power interruption • Meets American Boat and Yacht Council (ABYC) requirements for battery switches • Ignition protected—safe for installa-tion aboard gasoline powered boats • Case design allows surface or rear panel mountingAWG (95mm

2

) battery cables.

HD-Series Battery Switch:

50079

Selector 4 Position

#3002

5

SPECIFICATIONS

3002-HDCranking Rating: 10 sec 2,750 Amperes DCCranking Rating: 1 min. 1,150 Amperes DCIntermittent Rating: 5 min 700 Amperes DC

Continuous Amperage 500 Amperes DCMaximum Voltage Rating 32 volt DC

Terminal Stud Size 1/2" (M12)

Terminal Stud Torque 220 in-lbs. (24.86 N-m) max.

Mounting Holes Accept 1/4” (M6) Screw

Cable Size to Meet Ratings 4/0 AWG (120mm

2

)

Cable Quantity to Meet Ratings

Two Cables / Terminal

Cable Clearance For 4/0 AWG Cables 1.10" (27.9mm)

Weight Lb (Kg) 1.25 (0.57)

Certifications & Agency Standards

CE Marked

UL Listed - UL 1107 electric power switches

Meets American Boat and Yacht Council (ABYC) requirements

Meets UL 1500 and SAE J1171 external ignition protection requirementsWaterproof rated IP66—protected against powerful water jets

HD-SERIES BATTERY SWITCH, SELECTOR 4 POSITION

Switches isolated battery banks to all loads or combines battery banks to all loads

NEW!

E-SERIES BATTERY SWITCHES

Up to 350 Amperes Continuous Rating

Ignition protected - safe for installation aboard gasoline powered boats. Tactile indicator con-veys knob position by feel only. Fits all Perko and Guest low amperage battery switch hole pat-terns. Case design allows surface or rear panel-mounting. Accepts up to 4/0 AWG (95mm2) battery cables. • Meets American Boat and Yacht Council (ABYC) requirements for battery switches. • Make-before-break contact design on 9001 and 9002 models allows switching between battery banks without power interruption.

APPLICATIONS 12533

1. Switches battery bank 1 or battery bank 2 or battery banks 1 and 2 to all loads using one switch.

APPLICATIONS 13013

1. Switches a single battery to a single load group. 2. Can be used in multiples to manage several isolated circuits including cross connec-ting for emergency paralleling.

E-Series Battery Switch:

12533

Selector

#9001E

5

13013

Single Circuit On/Off

#9003E

5

SPECIFICATIONS

9001e-9003eInrush Rating: 0.25 sec (10 repeats)* 1,750 Amperes DC

Cranking Rating: 9.75 sec (10 repeats)* 900 Amperes DC

Intermittent Rating: 5 min (UL 1107) 600 Amperes DC

Continuous Rating: (UL 1107) 350 Amperes DC

Terminal Stud Size 3/8"-16 (M10)Terminal Stud Torque 140 in-lbs.

Cable Size to Meet Ratings*** 4/0

Voltage Rating 48 Volts DC MaximumCable Clearance For 4/0 Cables 1.10" (27.9mm)

Case Material Reinforced Polycarbonate

CE marked

AGENCY STANDARDS

UL Listed - UL 1107 electric power switches**Meets UL 1500 and SAE J1171 external ignition protection requirements* Blue Sea Systems Engine Starting Standard** Per Circuit

***

Reducing cable size will reduce current rating

12533 13013

• Meets American Boat and Yacht Council (ABYC) requirements for battery switches • Ignition protected—safe for installation aboard gasoline powered boats • Case design allows surface or rear panel mounting • Accepts two4/0 AWG (95mm

2

) battery cables.

HD-Series Battery Switch:

14004

Single Circuit On/Off

#3000

5

SPECIFICATIONS

3000-HDCranking Rating: 10 sec 2,750 Amperes DCCranking Rating: 1 min. 1,325 Amperes DCIntermittent Rating: 5 min 900 Amperes DC

Continuous Rating: 600 Amperes DCMaximum Voltage Rating 32 volt DC

Terminal Stud Size 1/2" (M12)Terminal Stud Torque 220 in-lbs. (24.86 N-m)Mounting Holes Accept 1/4” (M6) Screw

Cable Size to Meet Ratings 4/0 AWG (120mm

2

)

Cable Quantity to Meet Ratings

Two Cables

Cable Clearance For 4/0 AWG Cables 1.10" (27.9mm)

Weight Lb (Kg) 1.30 (0.59)

Certifications & Agency Standards

CE Marked

UL Listed - UL 1107 electric power switches

Meets American Boat and Yacht Council (ABYC) requirements

Meets UL 1500 and SAE J1171 external ignition protection requirementsWaterproof rated IP66—protected against powerful water jets

BLUE SEA SYSTEMSBATTERY SWITCHES

HD-SERIESBATTERY SWITCH, SINGLECIRCUIT ON-OFF

Switches a single battery to a single load group

NEW!

ATTWOOD 4-WAYBATTERY SELECTOR SWITCH

Single-pole, triple-throw switch permits fourconnection modes: Battery One, Battery Two, two batteries in parallel, or both off. Rated for 230-amps continuous, 345-amps momentary. For 6-Volt to 32-Volt D.C. systems. Includesalternator field circuit disconnect to prevent surges. Selector has positive click positions. Bakelite housingwith brass terminals, and brass nuts. Install with #10 screws.

72949 4-Way Battery Selector Switch, 5-1/2" dia. x 2-3/4" deep, Skin Pack #14230-3 6

NEW!

BATTERY ACCESSORIES

In Section E: Meters/Testers Wiring Fuses 12V Accessories Battery Accessories Chargers & Inverters Cords & Adapters Box/Hatch Switches Generators

E

6

= Std. Carton Qty.

139

ELECTRICAL


14578

1454914548

M-SERIES BATTERY SWITCHES

300 AMPERES CONTINUOUS RATING

All switches have: • Ignition protected - Safe for installation aboard gasoline powered boats. • Tactile textures indicate knob position by feel only. • Case design allows surface, front panel, or rear panel mounting. • Label with international ON/OFF legends. • Ideal for marine or RV applica-tions. • Accepts up to 4/0 AWG battery cables. • All non-corrosive marine grade metals. • Molded in

durable reinforced polycarbonate. • ICON label set included for circuit identification. • Removable key or knob remains positively retained. • 3/8"-16 M10 tin-plated copper studs for maximum conductivity andcorrosion resistance. • 7/8" Long stud length to accept multiple cable terminals. • Isolator cover with snap-in sectionsprotects rear contacts.

APPLICATIONS (14548-14549)

1. Switches a single battery toa single load group.

2. Multiple switches can be used to manage several isolated circuits including crossconnecting for emergency paralleling.

APPLICATION (14578)

1. Switches battery bank 1 orbattery bank 2 or battery banks 1 and 2 to all loads using one switch.

SPECIFICATIONSInrush Rating: 0.25 sec (10 repeats)* 1,500 Amperes DCCranking Rating: 9.75 sec (10 repeats)* 700 Amperes DCIntermittent Rating: 5 min (UL 1107) 500 Amperes DCContinuous Rating: (UL 1107) 300 Amperes DCMaximum Voltage Rating 48 Volt DCTerminal Stud, Tin-Plated Copper 3/8" -16 (M10)Terminal Stud Torque 140 in-lb.Cable Size to Meet Ratings*** 4/0 AWGCable Clearance For 4/0 Cables 1.12" (28.4mm)

Case Material Reinforced Polycarbonate

CE markedAGENCY STANDARDSUL Listed - UL 1107 electric power switches. Meets UL 1500 and SAE J1171 external ignitionprotection requirements. * Blue Sea Systems Engine Starting Standard ** Per Circuit *** Reducing cable size will reduce current rating

M-Series Battery Switch:14548 Single Circuit On-Off w/Key #6005 514549 Single Circuit On-Off, w/Knob #6006 114578 Selector #6007 5

POLLAK SOLENOID SWITCHES - CONTINUOUS DUTY

• 6-24 VDC Systems• Plated Steel or Phenolic Housings • Ignition & Ground Terminals, No.10-32 Thread• Contact Terminals 5/16"- 24 Thread• Bracket Mounting Holes;

5/16" x 19/32",2 1 /8" on centers. • Complete Mounting Hardware.

Starter Solenoid, Continuous Duty 100 Amps, 4 terminal, UL listed:13753 Bulk #52-307 25

13785 Visi-Pak #52-307V 1Starter Solenoid (Same as 52-307 except grounded), 3 terminal, UL Listed:13678 Bulk #52-312 50

13753

SPECIFICATIONSVoltage Rating: 6-24 VDC

Features:

12-V Continuous Duty Solenoid Insulated, with hardware. Flat Bracket. Replaces: Delco 1114218, 223; Prestolite 15-132,133, 236, 311, SAS-4201, 4202, 4213, 5203.Except grounded with three terminals. Replaces Presolite No's 15-139 SAS 4208.

Current Rating: 85 DC AmpIn Rush Current: 150 Amp

See the new additionsto the line in the

New Products Section!

PROGRESSIVE DYNAMICS RV & MARINE AUTOMATIC TRANSFER RELAY SYSTEM

Generator to shore power automatic transfer relay system features: • Heavy duty relays to pre-vent contact damage during high current transfer operation. • Quick change replaceable circuit board. • Time delay circuit board ensures gener-ator voltage is at proper level before transfer occurs. • Built-in strain reliefs for easy installa-tion. • Protective cover easily snaps on or off. • PD5110010V has pigtail AC wire connections.

12375

Automatic Transfer Relay System, 120VAC, 30Amp

#PD5110010V

1

14945

Automatic Transfer Relay System, 120VAC, 50Amp

#PD52V

4

15009

Battery Relay

#BR100

1

PARALLAX POWERSUPPLYBATTERY DISCONNECT RELAY

Prevents batterydrain during campingand storage periods. • Helps maintainbattery life. • No continuous current draw. • 100A 12VDC capability continuous. • 300 amp surge.

BATTERY ACCESSORIES • RELAY

E

140

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

ELECTRICAL

Parallax Power Centers - combining powerconversion, battery charging, and AC/DCdistribution - are a benchmark for RV power. 500 Series Power Centers for 50 amp/240 volt service are the most versatile yet, with eight AC branches, 15 DC fuse circuits, and a 50Amp main AC breaker. Add-ons like roof air condition-ing, washers and dryers are accommodated. Extra panels are rarely needed. Filtered DC output is ideal for electronic-based appliances, accessories and motors. Power is free from spikes and surges, and operation is quiet. Smooth appliance operation and bright lighting are two of the benefits RVers appreciate. FCC Class B certification attests that minimal signal interference is caused with TVs, radios and emergency channels. c-ETL-us listed.

MODEL 555

• DC Output: 55 Amps. • AC Input: 120/240 Volts. • 8 AC Branches. • 15 DC Fuse Locations. • 12-1/8” H x 12-1/4” W x 8-5/8” D.

16199

55 Amp. DC Output

#555

1

• Filtered power is free from spikes and surges, and the full output rating is available for battery charging. • 30 amp DC output is ideal for smaller RVs. • Pre-wired circuit breakers are provided: (1) 30 amp main, (1) 20 amp branch, and(2) 15 amp branches. • Locations for five DC fuses (fuses not included); (1) fuse for reverse polarity protection is included. • 13.75" W, 7" H, 5.5" D; Cut-out required: 12.75" W, 6.25" H.

15010

30 Amp Converter (Door included,but not shown)

#6730D

1

PARALLAXPOWER SUPPLY500 SERIES POWER CENTERS

The Perfect Power Solution for Smaller RV Classes.

PARALLAX POWER SUPPLY6730 SERIESELECTRONIC CONVERTER/CHARGER with AC and DC Distribution

30 AMP AC-55 AMP DCELECTRONIC POWER CENTER

Direct OEM Replacement Part

• 30 amp AC service with 55 amp on theDC side. • Distribution panel accomodates a30 amp main AC circuit breaker. • Has a 5 AC branch circuits and 11 DC fuse circuits. • Dim.: 11-3/4” H x 14” W x 7” D.

10129

55 Amp Converter with Distribution Panel

#7155

1

55 AMP REPL. CONVERTER SECTION

• Direct lower section replacement.• Dim.: 9.5” L x 7” D x 4” H.• 2-yr. warranty.

10131

Replacement Lower Section f/7155

#081-7155-000

1

The Automatic Load Shed Device (ALS 20) allows operation of two 20Amp loads froma single 20Amp branch circuit. Meets NEC requirements for operation of two 120-volt ther-mostatically controlled devices. ALS 20 oper-ates a shedable load such as an electric water heater and a priority load such as a microwave oven. The shedable load is delayed temporarily via ALS 20 to allow operation of the on-demand priority load. ALS 20 is an important safety and performance enhancement for RV electrical systems. 6” W x 4-1/8” H x 4-7/16”D.

14610

Automatic Load Shed Device

#ALS20

1

10129

10131

PARALLAXPOWER SUPPLY7155 SOLID POWER CENTER

PARALLAX POWER SUPPLYAUTOMATIC LOAD SHEDDEVICE

PARALLAX POWER SUPPLY7300RU (REPLACEMENT UPGRADE)Electronic Converter/Charger Sections for Power Centers

An Easy Upgrade to Clean, Quiet Power.

• Upgrades linear power centers to electronic performance. • Provides filtered electronic power to existing power centers. • Power is free from spikes and surges, and the full output ratingis available for battery charging. • Minimizes interference with TVs, radios, and emergency channels per FCC Class B certification. • Only sound comes from a whisper quiet cooling fan. • DC Output is 14.0 max. volts @ no load, 13.2 volts max. at full load. • The included fuse panel provides two 30 amp fuses for reverse polarity battery protection and capability up to nine DC load branch circuits. • 2-yr. warranty.

Converter/Charger Lower Section & Upgrade:

18024

45 Amp. Output

#7345RU

1

12411

55 Amp. Output

#7355 RU

1

These converter/charger sections are directreplacements for the lower sections of Parallax555 and 565 Power Centers. Filtered DC outputis ideal for electronic-based appliances, accessories and motors.

500 Series Converter/Charger Only:

16200

55 Amp. DC Output

#555R

1

7300RU sections easily install into 6300 Series electronic power centers. A simple way

to upgrade the popular 6300, 7300RU sections.

REPLACEMENT DOOR LATCH FOR CONVERTERS

14985 Door Latch#13516372

PARALLAX POWER SUPPLY500 SERIES REPLACEMENTCONVERTER SECTIONS


CONVERTERS/CHARGERS

E

6

= Std. Carton Qty.

141

ELECTRICAL


PARALLAX POWER SUPPLY7400 SERIES DECK-MOUNTED CONVERTER/ CHARGERThe Most Proven Power... Quiet, Clean, and Clear.

Order # Model DescriptionAC Input DC Output

Volts Watts Volts Amps

12899 #7430 30 Amp Converter/Charger

105-13060Hz 490 13.85 max. @ no load

13.2 min. @ full load 30

12412 #7440 40 Amp Converter/Charger

105-13060Hz 670 13.85 max. @ no load


18186 #7445 45 AmpConverter/Charger LS

105-13060Hz 775 13.85 max. @ no load


18187 #7455 55 Amp Converter/Charger LS

105-13060Hz 975 13.85 max. @ no load


14399 #7465 65 Amp Converter/ Charger

105-13060Hz 1120 13.85 max. @ no load


7300 SERIES POWER CENTER ELECTRONIC CONVERTER/CHARGER

The RV Industry’sMost Popular Power Center.

• Combines AC/DC distribution and converter/chargerin one space-efficient package. • Filtered power is free from spikes and surges. • Minimizes interference with TVs, radios, and emergency channels per FCC Class B certification. • Quiet operation. • Accommodates fiveAC branches and nine DC fuse circuits (fuses and circuit breakers not provided). The full outputrating is available for battery charging, virtually eliminating dead or drained batteries. • 14" W x 11.75" H x 7" D. • Two-year warranty.


Volts Branches Volts Amps

13046 #7345Power Center with 45 ADC Converter/Charger

120 5 14.0 max. @ no load13.2 max. @ full load 45

14518 #7345R45 ADC Converter/Charger Lower Section Only

N/A N/A 14.0 max. @ no load13.2 max. @ full load 45

13047 #7355Power Center with 55 ADC Converter/Charger

120 5 14.0 max. @ no load13.2 max. @ full load 55

14517 #7355R55 ADC Converter/Charger Lower Section Only

N/A N/A 14.0 max. @ no load13.2 max. @ full load 55

For smooth applianceoperation and bright flicker-free lighting.

The electronic converter/charger provides reliable battery charging and filtered output.

• Filtered DC power is free from spikes and surges. • Full output rating is available for battery charging. • Minimal signal interference with TVs, radios, and emergency channels per FCC Class B certification. • Quiet operation. The only sound comes from the cooling fan. • c-ETL-us listed. • Optional two-step charging provides expedient recharging and reliability through long-term park and storage periods. • Mounts in any position, including upside-down. • Dimensions: 4-1/8" H x 7" W x 12-3/8" L. • Two-year warranty.

PARALLAXPOWER SUPPLY90A DECK MOUNT CONVERTER

A 90 ampere DC output Converter/Charger with active Power Factor Correction technology!

Operates on a standard 20 Amp Outlet.

With Power Factor Correction the ParaMode 5490 uses 120V AC input current much more efficiently, producing 90 amperes of DC output current, yet draws only the AC input current previously required for a 55-65 ampere DC output unit. Input: 105-130V DC, 60 Hz, 1600W; Output: 13.6V AC, 90ADC; 3.75” H x 11” W x 11” L.

19859 90 Amp Converter/Charger with temperature compensation#5490TC 1

NEW!

PARALLAX POWER SUPPLYPARAMODETempAssure Temperature Compensated Battery

Charging featured on the Paramode Deck Mount Converter

TempAssure senses ambient temperature to continuously ensure proper battery charging. TempAssure provides higher charge voltages in colder weather, and lower charge voltages in hotter weather, to ensure reliable charging no matter where you are. Helps extend battery life and helps prevent dead and drained batteries. ParaMode/TempAssure provides filtered DC power and quiet operation. TempAssure compensation is a true breakthrough in RV power supplies! • 11” L x 8-3/8” W x 3-5/8” H. • DC output (Model 4455): 55 amps.

14615 Back by popular demand! ParaMode #4455TC 1

Denotes Limited Supply

CONVERTERS/CHARGERS

E

142 ◆ Not UPS-able; ▲ Hazmat terms apply; LS Limited Supply

ELECTRICAL

PARALLAX POWER SUPPLY4400 SERIES DECK MOUNT CONVERTERS



19747 #4445TC45 Amp DC Deck Mount Converter with Tempassure

105-13060Hz 775 See T/C Curve Chart 45

The 4400 Series of converters from ParallaxPower Supply is part of the ParaMode converterproduct line. ParaMode converters, simply put,are modular products that have the ability to beupgraded in the fi eld and interact with other Parallax PowerSupply products. A new stylish design with better airfl ow allows key components to operate cooler, and last longer than ever! Clean, stable, fi ltered output power is ideal for battery chargingas well as powering sensitive electronic equipment and amenities.

NEW!

3-5/8” H x 8-3/8” W x 11” L

NEW!

PARALLAX POWERSUPPLY5400 SERIESDECK MOUNTCONVERTERS

The 5400 Series of converters is part of the Paramode family of productsand are compatible with accessories such as the TempAssure module.

The 5400 Series of deckmount converters feature active power factor correction which makes better use of incoming power. This allows operation of the 65 & 75ADC converters on a 15 amp receptacle!



19755 #5465TC65 Amp Converter/Chargerwith temperaturecompensation


19852 #5475TC75 Amp Converter/Chargerwith temperaturecompensation




50126 #45TCRU45 Amp Converter/Charger with temperaturecompensation

105-130 60Hz 775 See T/C Curve Chart 45







4-1/2” H x 11-1/2” W x 10-1/2” D

The TCRU series is a group of products designed to upgrade any classic 6300, 7300, or 500 Series Power Center by adding the benefits of the TempAssure module. TempAssurefeatures temperature compensated charging that adjusts to the ideal charge voltage basedon battery temperature! Clean, stable, filtered output power is ideal for powering sensitiveelectronic equipment and amenities.

PARALLAX POWER SUPPLYTCRU SERIESCONVERTER/ CHARGER

Voltage vs. temperature curves for theParallax Power Supply® TempAssure™

temperature compensated battery charging system.‡

Included Accessories: • 11 Position 100ADC Fuse Blockwith blown fuse indicators. • 25 Foot Battery Temperature Probe.

NEW!

• Temperature Compensated Battery Charging• Quick Charge Function• Thermal Probe Fully Protected Against Shorts

3-5/8” H x 8-3/8” W x 11” L

Patented TempAssure Technology


CONVERTERS/CHARGERS

E

6 = Std. Carton Qty. 143

ELECTRICAL

This charger is no larger than a standard computer mouse yet packs 800 millamps of pure constant current charging power. Coupled with a brain (IC chip), the charger will constantly moni-tor, charge, and then maintain your battery --- even while totally submersed under water! Perfect for all outdoor types of ATV's, watercraft, motorcycles, boats, or anywhere water is a threat. International universal input voltage works anywhere in the world 100-240 AC Volts 50/60 Hz.

• "Supersmart" Technology • Spark Proof • Short Circuit Protected • Reverse Polarity Protected • Waterproof • Weighs only 1 Pound • 3-yr. warranty!

16848 Battery Tender® Waterproof 800,800MA 12V #022-0150-DL-WH 12

BATTERY TENDER PLUS 12V - 1.25A

The Battery Tender Plus is a 1.25-amp battery charger designed to fully charge a battery and maintain it at proper storage voltage withoutthe damaging effects caused by trickle chargers. Included is a quick connect harness for hard to reach areas. • Temperature compensated to ensure optimum charge voltage according to ambient temperature. • Automa-tically switches from full charge to float charging mode. • Battery Tender at 1.25-amp will charge as fast or faster than any 3-amp charger available. • Reverse Polarity Protection to ensure user safety. Red & Green Lights Alternately Flash in thiscondition. • Complete 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode). • 10-yr. warranty!

16849 Battery Tender® Plus, 1.25A 12V#021-0128 12

BATTERY TENDER® WATERPROOF 800

The engineers at Deltran led the way in

innovation and conve-nience by introducing

the International Battery Ten-der® Waterproof 800. Since its intro-

duction in 2003, it has been widely accepted as a solid new addition to the Battery Tender® family of charger products. This compact 800 mA battery charger has all the charge charac-teristics of its cousin the Battery Tender Junior. It incorporates highly efficient surface mount technology electronic components. The inte-rior is completely encapsulated, protected from shock, vibration, and moisture by an elec-trically insulating, thermally conductive, flame retardant, UL recognized, synthetic epoxy resin compound. It's tough, affordable, and a strong, innovative battery charging solution.


For 30Amp, 120-volt electrical systems — • Allows changeover of power between shoreline cord and generator controlled from inside the RV.• Can be used as deck-mount or mounted to the back of Parallax Power Centers. • Reliable elec-tronic operation. • Generator time delay for load stabilization. • Chatter-free operation under low line voltage conditions. • 6" W x 4-1/8" D x 4-7/16" H.

14611 ATS 301 Line Generator Switch, 30 Amp./120 Volt #ATS301 4

16600 50 Amp, 120/240 Volt#ATS501 1

• Converts 110V AC Wall Outlet into a 12V DC Plug. • Use Your 12V Products at the Home, Office or on the Road. • Output: 12V DC-5.8A, Input: 100-120VAC and 50/60Hz 1.8A. • Use with Coolers, Spotlights, Fans,Cell Phones. • AC/DC converter, 5.8 amps. Use only with appropriately sized products; do not exceed 5.8 amps.

10002 12V Power Converter, GM-1200#55522 20

PARALLAX POWER SUPPLYLINE GENERATORSWITCHES

MODEL ATS™ 301

Safety and Convenience for Power Transfer.

Safe, convenient power trans-fer for 50 Amp,

120/240-volt systems

MODEL ATS™ 501

With a flick of the genera-tor switch, the ATS 501 line generator switch from Parallax transfers power smoothly between shoreline power and generator/secondary power source, regardless of line voltage conditions. ATS 501 is engineered for superior reliability in 50 Amp, 120/240-volt electrical systems (per the new UL Standard 1008).Electronic circuit board design is proven in extensive cycle testing to withstand heat and torque. The low-profile chassis measuring just 3-1/2” high allows mounting in areas not possi-ble with other 50 Amp transfer switches, and installation can be made without cover removal. Manual shut-off for time delay optimizes use with inverters. 8-3/4" W x 3-1/2" H x 11-3/4" D.

SUNFORCE 12V POWER CONVERTER—GM-1200

• Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). • Complete 4-step charging program (Initializa-tion, Bulk Charge, Absorption Mode, Float Mode). • Automatically switches to float/mainte-nance voltage after fully charging the battery. • If the battery voltage drops too far under load, full charger output power resumes. • Solid state two color LED indicates stage of charger. • Spark proof. • Reverse polarity protected. • 12' output cord. • 5-yr. warranty!

16847 Battery Tender® Junior, 750mA 12V#021-0123 12

WATERPROOF, Shock & Vibration Resistant, Lightweight (LESS THAN 4 POUNDS), compact charger designed for either portable operation or permanent mounting. Charges and maintains both flooded and sealed, maintenance free, AGM, lead acid batteries. Float / Maintenance function maintains batteries at proper storage voltage without the damaging effects caused by trickled chargers. The Power Tender PLUS is easy to use, it’s rugged, its compact, it's packed with power, and it’s backed by the reputation of the undisputed battery charger industry leader, DELTRAN.

• Microprocessor Controlled, BTP Technology • Charges both flooded & sealed maintenance free lead acid batteries. • Charges any size (capacity) lead acid battery. • Reverse Polarity Protection (VIA EXTERNAL IN-LINE FUSE). • Complete FOUR-Step Charging Program(Initialization, Bulk, Absorption, & Float /Maintenance). • 2-yr. Warranty !

16852 Power Tender® Plus, 5.0A 12V#022-0157-1 6

DELTRAN BATTERY TENDER CHARGER/MAINTAINER

Battery Tender Products are perfect for storage periods and when the RV isn't being used to maintain batteries at 100% at all times.Also the chargers will not overcharge and boil the battery like thechargers currently on your RV.

BATTERY TENDER®

JUNIOR 12V-0.75A CHARGER/

MAINTAINER

The Battery Tender Junior is much more than a trickle charger. It has a brain. It's lightweight, compact, and fully automatic; very easy to use, especially in small spaces. It will keep your battery fully charged so that it is ready to go when you are!

POWER TENDER PLUS 12V -5A

16852

16849

CONVERTERS/CHARGERS

E


ELECTRICAL

Use the sun’s energy to maintain the charge of 12V batteries which power motorcycles, personal water crafts, ATV's, snowmobiles. Fully weatherproof. Easy connection to the battery. Maintenance free. Built-in overcharge / discharge protection. Works in all daylight conditions. Maximum power output : 1 watt. Temperature range -40 to 176 F. Dim.: 19-1/2" L x 5-7/8" W x 1-1/2" H (49.5 x 15 x 4 cm).

14722 Coleman® 1 Watt Solar Power Sports Charger#58013 24

Maintain 12V battery charge by using the sun’s power for cars, SUVs, ATVs. Battery clamps Included. Also includes 12V DC plug to plug into 12V car plug. Mounts on Windshield with Included Suction Cups. Made of Durable ABS Plastic & Amorphous Solar Cell. Maintenance free, charges in all weather conditions. Temperature range -40 to 176 F.Max Output 2 Watts 133 Mah.Dim.: 19-5/8" L x 6-1/2" W x 1-1/8" H (50 x 16.5 x 3 cm).

14818 Coleman® 2 Watt Solar Battery Maintainer#58012 24

Trickle charge and maintain your 12V battery. Completely weatherproof,use indoors or outdoors. Built-in blocking diode protects battery discharge at night. Temperature range -40 to 176º F. Max output 6W 400 Mah.Includes: 4 Pre-cut holes for easy installation; 4 Stainless Steel Screws; 9.5 Ft wire; 12V DC Plug; Battery Clamps; Quick Connecttechnology. Dim.: 18" L x 1-1/2" W x 14-1/2" H (45 x 3 x 36 cm).

14834 Coleman® 6 Watt Solar Battery Trickle Charger#58022 12

14722 in use

14722

14818

14818 in use

SOLAR VENTWITH LIGHT

Powered bysunlight. Easy installation, no wires required. Silent secure ventilation. No running costs. Helps reduce humidity. Can be mounted in polycarbonate, glass, wood, metal and more. Dim.: 9.5" L x 9.5" W x 3.5" H (24 x 24 x 8.89 cm).

14843 Solar Stainless Steel Vent#81300 6

14834

14834 in use

7 Amp ChargeController Included

Works with Automobiles, RVs, Boats,Tractors, ATVs, ElectricFences, Deer Feeders, Telemetry, and more. Maintenance Free/Easy Installation. Works in All Weather Conditions. Built-in Blocking Diode Protects Battery Discharge at Night.Made of Durable ABS Plastic with an Amorphous Solar Cell. Temperature Range: -40° to 176° F. Max Output 18 Watts 1.2 Amp. Dim.: 38" L x 13-1/2" W x 1-1/2" H(96.52 x 34.29 x 3.81 cm).

14841 Coleman® 18 Watt Solar Battery Charger#58032 4

Same as above but also includes a 7 Ampcontroller. Includes: • Pre-cut Holes forEasy Installation. • 4 Stainless Steel Screws. • Battery Clamps. • CLA Adapter. • 12ft Wire. • 7 Amp Charge Controller.

14658 Coleman® 18 Watt Solar Battery Charging Kit(Includes a 7 Amp Controller) #58033 4

NOTE:Solar panels 15W and above can be hooked togetherto increase the rate at which your 12V batteries are being charged. Both amorphous and crystalline panels can also be hooked together.It is important however to correctly size the charge controller. The general rule is 1 Amp per 15 Watts of solar power. For example, the Coast kit # 14658 comes with a 7 Amp charge controller, 7 x 15 equals 105 therefore this controller can handle up to 105 watts of solar power (or in other words 5 of the 18W panels). Coast # 14648 (30 Amp Controller) can handleup to 450 Watts of solar power (30 x 15 equals 450).

14841

14658

COLEMAN® SOLAR BATTERYMAINTAINERS &TRICKLE CHARGERSAmorphous Solar Panels Charge In All Weather Conditions – Even On Cloudy Days!


SOLAR CHARGERS

E


ELECTRICALIn Section E: Meters/Testers Wiring Fuses 12V Accessories Battery Accessories Chargers & Inverters Cords & Adapters Box/Hatch Switches Generators

60W MONOCRYSTALLINE SOLAR CHARGING KIT WITH A 7 AMP CHARGE CONTROLLER*

Now includes a 7 amp charge controllerat the same great price!

Includes 60 Watt Solar Module, voltage tester, brackets, wiring and screws. 42.6" x 19" x 2.4". Includes a 7 Amp charge controller (Mfr#60012) for free!

10132 60W Solar Charging Kit with a 7 Amp charge controller

#37015 1

100-W Solar Panel. Dim.: 51” L x 26” W x 3-1/2” H(129 x 68 x 9 cm).

50277 NEW! Coleman® 100 Watt CrystallineSolar Panel #38100 ◆ 1

150-W Solar Panel. Dim.: 59" L x 26-3/4" W x 2-3/4" H (150 x 68 x 7 cm).

50278 NEW! Coleman® 150 Watt CrystallineSolar Panel #38150 ◆ 1

COLEMAN® SOLAR KITSComplete solar power generator kit. Create power for homes, boats, RVs, backup and remote power use. Portable & easy setup. Works with12V & 110V appliances. Weatherproof and maintenance free. Works inall daylight conditions. Includes rugged metal frame, junction box formultiple panel connection, 12V DC plug and alligator battery clamps, mounting screws and extra wiring, 12V female socket for powering 12V products, 200W inverter and 7 Amp charge controller. There are 3 panels in the 55 Watt kit (18.3 watts each). Shipping dimensions are 11” x 44-1/4” x 15-1/2”.

14716 Coleman® 55 Watt Solar Kit#58050 1

Generate power for homes, boats, RVs, backup and remote power use. High efficiency crystalline solar cells. Weatherproof. Ideal for areaswith high sun exposure.

COLEMAN® CHARGECONTROLLERS

Protect Battery from Overcharge and Discharge. For Use with 12 Volt Solar Panels and Batteries Only. Handles up to 30 Amps of Array Current. Handles up to 450 Watts of Solar Power. Maintenance Free Protection of Your Solar Panel and Batteries. Maintains Battery Voltage. Maintain 12V Batteries in a Fully Charged State. Dim.: 8-3/4" L x 10-1/4" W x 2-5/8" H(22.5 x 26 x 6.5 cm).

14642 30 Amp Solar Charge Controller#68022 20

14648 30 Amp Solar Charge Controllerwith an LED digital display

#68032 20

FOR MORE INFORMATIONPLEASE VISIT

WWW.SUNFORCEPRODUCTS.COM

Prevents overcharging of 12 Volt batteries. Maintenance free protection of your solar panel and batteries. Maintains 12 Volt batteries in fully charged state. LED indicators indicate charging and fully charged battery states. Dim.: 7-5/8" L x 4-5/8" W x 2-1/4" H(19.5 x 12 x 5.5 cm).

14600 7 Amp Solar Charge Controller#68012 24

14600

14642

14648(Same as above

but also includes an LED digital display)

Also refer to page 133 for 12V Power Converter from Sunforce Products.

14716

50277

50278* The more panels you have, the more

appliances you can help run and the quicker you can recharge your 12 volt bank of batteries.

NEW!

SOLAR CHARGERS

E


ELECTRICAL

COLEMAN 300W SOLAR KITWITH CONTROLLER/INVERTER

Made with high efficiency crystalline solar cells for years of service, this solar kit is easy to install and completely maintenance free. Designed with aluminum frames for extended outdoor use, these solar panels are fully weatherproof for superior durability. Connect multiple panels for more power.

• Ideal for a variety of applications, including RVs, homes, boats, remote and back-up power use, 12 V battery charging, solar power stations, pumps, and lighting equipment. • Fully weatherproof design. • High efficiency crystalline solar cells. • Aluminum frame for extended outdoor use. • Shatterproof tempered glass for high durability. • Bypass diode minimizes power drop caused by shade. • Easy to install and maintenance free. • Includes 2 x 150W solar panels, 30 amp digital charge controller, 300W power inverter new feature! with USB and all parts required for setup. • Maximum power output: 300 watts and 17.5 amps.

50279 Coleman 300W Solar Kit with Controller/Inverter#38528 1

63.75” H x 11.00” W x

33.25” L

COLEMAN 260W SOLAR KITWITH CONTROLLER/INVERTER

Made with high efficiency crystalline solar cells for years of service, this solar kit is easy to install and completely maintenance free. Designed with aluminum frames for extended outdoor use, these solar panels are fully weatherproof for superior durability. Connect multiple panels for more power.

• Ideal for a variety of applications, including RVs, homes, boats, remote and back-up power use, 12 V battery charging, solar power stations, pumps, and lighting equipment. • Fully weatherproof design. • High efficiency crystalline solar cells. • Aluminum frame for extended outdoor use. • Shatterproof tempered glass for high durability. • Bypass diode minimizes power drop caused by shade. • Easy to install and maintenance free. • Includes 2 x 130W solar panels, 30 amp digital charge controller, 200W power inverter and all parts required for setup. • Maximum power output: 260 watts and 15.2 amps.

31377 LS Coleman 260W Solar Kit with Controller/Inverter#37128 1

COLEMAN 7.5W FOLDINGSOLAR PANEL

• Portable folding solar charger for any USB or 12 volt device. • Charges cell phones, cameras, GPS systems and more! • Perfect for camping, traveling, hiking, emergencies and a variety of outdoor activities. • Foldable for easy travel and storage. • Lightweight and compact design. • Features a 7.5 watt crystalline solar panel.• Weatherproof for added durability. • Complete unit includes: Coleman 7.5W folding solar panel and 12V female CLA adaptor (for plugging in 12V devices).

19593 Coleman 7.5W Folding Panel#22007 2

18.5”Hx 6.75”Lx 0.5”W(unfolded)

NEW! 4.25”H x 6.75”Lx 1”W

COLEMAN 2W SOLAR USB/AAA BATTERY CHARGER

• Charges USB devices with solar charged AAA batteries. • Charges cell phones, cameras and more! • Perfect for camping, hiking, traveling and a variety of outdoor activities. • Portable forultimate convenience. • Compact & lightweight design. • Amorphous solar panel works anywhere. • Features protective hard case for added durability. • Weatherproof. • Complete unit includes: 2W Solar USB/AAA battery charger, 5 AAA recharge-able batteries and female USB adaptor (so USB devices can be plugged in).

19619 Coleman Folding USB Charger#28103 3

NEW!

63.75” H x 11.00” W x

33.25” L

63.75” H x 11.00” W x 33.25” L

Also refer to new products section for more great accessories from Sunforce Products.

NEW!


SOLAR CHARGERS

E



COLEMAN 600 WATT WIND TURBINE

• Charges both 12V and 24V battery banks to helprun appliances and electronics. • Generatespower day and night for maximum versatility.• Ideal for remote locations, cottages andback-up power needs. • Built with aerodynamicfiberglass blades to ensure low wind noise. • Weatherproof industrial strength designfor years of service. • Begins to operate in wind speeds aslow as 4 MPH and includesoverspeed protection at 1300 RPM for added efficiency. • Do-it-yourself, maintenance-free installation. • Includes all parts needed for installation: Turbine, (3) blades, safe and highly-efficient Maximum Power Point Tracking (MPPT) Charge Controller for optimized charging and battery health, hub, vertical tail, nose cone, amp meter, screw pack, replacement screw pack

16729 600 Watt Wind Turbine #48444 1

COLEMAN CRYSTALLINE SOLAR PANELSby SUNFORCE PRODUCTS INC.

• Fully weatherproof design. • High efficiency crystalline solar cells. • Rugged aluminum frame for extended outdoor use. • Shatterprooftempered glass for superior durability. • Bypass diode minimizes power drop caused by shade. • Easy to install and maintenance free.

Coleman 10 Watt Crystalline Solar Panel

• Ideal for boats, trucks, tractors and more. • Maximum power output: 10 watts, 600 mAmps.

31372 Coleman 10 Watt Crystalline Solar Panel #38001 6


• Ideal for charging 12 volt batteries of boats, trucks, tractors, RVs, cars and more. • Maximum power output: 20 watts, 1.17 amps.• Recommended to use with a charge controller (not included).



• Ideal for a variety of applications including 12V battery charging, lighting, boats, RVs and more. • Maximum power output: 30 watts, 1.75 amps. • Recommended to use with a charge controller (not included).



• Ideal for cabins, boats, RVs, 12 volt battery charging and more.• Maximum power output: 60 watts, 3.5 amps. • Recommended to use with a charge controller (not included).


Wiring and Bracket Accessory Pack

DIY accessory kit for your crystalline solar panels!

31376 Accessory Kit ( 20 ft. of wire, Mounting brackets and Mounting screws) #12506 1

NEW!

25 yearlimited

warranty

31374: 26.57” H x 1.18” W x 17.52” L31375: 26.22” H x 1.38” W x 31.34 L

31376

31372: 14.17” H x 0.87” W x 11.61” L31373: 14.17” H x 0.87” W x 19.09” L

31374

31375

31372

31373

NEW!

Wind turbine and tower are sold separately

30’ TOWER KIT FOR 600WATT WIND TURBINE

• 30 ft. tower mount for the Coleman 600W Wind Turbine and other small wind generators. • Designed to withstandforces on the wind generator and tower from high, heavy winds. • All-weather tower kit for superior durability. • Guy wire supported tower uses lightweight tubing while providing plenty of strength. • Do-it-yourself, maintenance free installa-tion. • Safely grounds the wiring. • Allows for turbine mounting at an ideal height. • Recommended to use a cement base for best performance. • Includes all parts required for installation: 3 x 6' x 1-5/8" flared pipe, 6' x 1-5/8" straight pipe, 3' x 1-5/8" flared pipe, 3' x 1-5/8" straight pipe, anchors 90 degree angle, 1/8" cable, Earth staples, 1/8" cable clamps, 1/8" cable thimbles, plastic bag, wire ties, guy wire plate stampings, hardware box, pipe box.

S/O 30' Tower Kit for Wind Turbine #45455

SOLAR CHARGERS • WIND TURBINE

E


ELECTRICAL

Built-in Charge Wizard constantly monitors voltage status and automatically manages your battery.

Upgrade or Replacement for Many RV Power Center Converter/Chargers

17382 35 Amp Converter/Charger with built-in Charge Wizard #PD4635 417383 45 Amp Converter/Charger with built-in Charge Wizard #PD4645 417385 55 Amp Converter/Charger with built-in Charge Wizard #PD4655 4

Made in the USA, these Lower Section Replacement/Upgrade Converters for RV power replaces most lower sections in the market including WFCO, Parallax and Magnetek. With all of the reliable features found in Progressive Dynamics’ other converters, this unit will impress you with quality, performance, reliability and features. For reliable 12 volt power, count of the 4600 Series Converters!

“MightyMini” The Compact All-In-One System... AC/DC Distribution Panel and Inteli-Power Converter

10472 45 Amp Converter/Charger with built-in Charge Wizard

#PD4045KV 610450 45 Amp Replacement Converterfor Coast#10472 #PD4045CSV 6

Progressive Dynamics, Inc. • 507 Industrial Rd. • Marshall, MI • 269-781-4241 • Fax: 269-781-7802 • [email protected]

Automatically senses generator power and prevents shoreline and generator power entering the AC distribution panel at the same time and ruining your camping. Heavy-duty relays prevent contact damage during high current transfer operation. Time delay circuit baord ensures generator voltage is at the proper level before transfer occurs. Includes a protective snap-on cover with wiring schematic mounted inside the cover.

14945 Automatic Transfer Relay System, 120VAC, 50Amp

#PD52V 4

12375 Automatic Transfer Relay System, 120VAC, 30Amp

#PD5110010V 1

4500® SERIES

Panel Size: 11.85”W x 14.125”H x 8.5”D.

17392 60 Amp All In One Converter/AC/DC/ Panel

#PD4560K12LV 1


CONVERTERS/CHARGERS

E

6

= Std. Carton Qty.

149

ELECTRICAL


Models can recharge the battery to 90% in 2-3 hours using our

patented Charge Wizard technology.

14390 45 Amp Converter/Charger with built-in Charge Wizard #PD9245CV 614391 60 Amp Converter/Charger with built-in Charge Wizard #PD9260CV 114392 70 Amp Converter/Charger with built-in Charge Wizard #PD9270V 114393 80 Amp Converter/Charger with built-in Charge Wizard #PD9280V 1

The Electric RV Converter/Chargers of choice by leading manufacturers.

Engineered for power hungry applications.

Standard features on all models• Reverse battery protection protects converters from damageresulting from improper (reverse) battery lead connection.

• These solid-state converter/chargers deliver filtered DC power to all 12 Volt lighting and appliance circuits providing safe and reliable service.

• Electronic current limiting automatically reduces output voltage when maximum capacity is reached. Protects your investment.

• Low line voltage protection automatically shuts converter down if input voltage is insufficient and protects appliancesfrom damaging low voltage irregularities.

• Variable speed intelligent cooling fan automatically monitors converter temperature and activates fan at speed required. Very slow quiet speeds are used when demand is low such as during sleeping hours. High voltage protection protects converter from spikes or surge of voltage over 135V.

• Automatic thermal shutdown turns off converter when unittemperature exceeds 150°F and protects converter from damage due to excessive heat.

• 9200 Series features built-in Charge Wizard that constantly monitors voltage status and automatically manages yourbattery. (Optional on the 9100 Series).

Progressive Dynamics, Inc. • 507 Industrial Rd. • Marshall, MI • 269-781-4241 • Fax: 269-781-7802 • [email protected]

12043 30 Amp Converter/Charger #PD9130V 611727 40 Amp Converter/Charger #PD9140AV 612438 45 Amp Converter/Charger #PD9145AV 6

11728 60 Amp Converter/Charger #PD9160AV 612045 80 Amp Converter/Charger #PD9180V 6

11726 Charge Wizard #PD9105V 6

Pendant #PD92201 S/O.

Included withall #9200

Series

CONVERTERS/CHARGERS

E

150

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

ELECTRICAL

DC-AC Modified Sine Wave Inverters - SAM SeriesModified sine wave AC-DC power inverters are ideal for powering office equipment, television, power tools and lighting systems from your car, truck, boat, RV, solar system, or battery.

Order # Model Description DC Input

AC Output Watts Dimensions

L" x W" x H"AC

Receptacle Warranty

14076 SAM-100-12 100W Power Inverter12 VDC 115 VAC

100W 5.1 x 2.5 x 1.5One 2 Year

14077 SAM-250-12 250W Power Inverter 250W 5.9 x 4.5 x 1.8

14078 SAM-450-12 450W Power Inverter

12 VDC 115 VAC

450W 6.0 x 6.1 x 2.2

Two 2 Year14079 SAM-800-12 800W Power Inverter 800W 8.6 x 7.1 x 2.4



14158 SAM-2000-12 2000W Power Inverter12 VDC 115 VAC

2000W 13.6 x 8.0 x 3.3Three 2 Year


All SAM-Series Inverters are Listed by ETL to UL Safety Standard 458.

100 WattModifiedSine Wave Inverter, SAM-100-12:

• Compact design with integrated 12V plug adapter• LED indicator for power status• Charge laptops, cell phones, tablets and other portable electronics from your vehicle without having to purchase a travel cord for each! • Protection: low battery, over temperature, over voltage, overload, short circuit, earth fault.

250 WattModified Sine Wave Inverter,SAM-250-12:

• Detachable cord with 12V plug adapter or use terminals to connect directly to a battery.

• Sold separately for use with SAM Series Inverters 1000W to 3000W. • 10 ft of cable with 8P Modular Connector (RJ45). • Bar Meter Monitor for battery charge level and output power.• LED indicator lights for: Over voltage protection, under voltage protection, over temperature protection, and over load protection.

14075 Inverter Remote Control for SAM-1000, 1500, 2000, 300;4.5” x 2.75” #SAM-RC 1

14076

14075

14232

14080

14077

1415814183

See also page 153 for Inverter Installation Cable and Fuse Kits to connect your inverter to a battery bank safely and simply.

Refer to the New Products section for more great accessories from Samlex.

14078

14079

All models in the SAM Series, with the exception of the SAM-100-12 (Coast#14076), have these features in common:

• Universal protection circuit: thermal, battery, overload, short circuit, earth fault. • Load controlled cooling fan.• Low battery input alarm. • Soft start technology. • Cool surface technology. • Low interference technology.

2000 and 3000 Watt Modified Sine Wave Inverters, SAM-2000-12 and SAM-3000-12:

- Optional remote control available for convenient operation. Model SAM-RC (Coast #14075; sold separately).

450 Watt ModifiedSine Wave Inverter, SAM-450-12:

• Detachable cord with 12V plug adapterand battery clamps included.

800 Watt Modified Sine Wave Inverter, SAM-800-12:

• A pair of battery clamps is included.

1000 and 1500 Watt Modified Sine Wave Inverters, SAM-1000-12 and SAM-1500-12

• Optional remote control available forconvenient operation. Model SAM-RC (Coast#14075; sold separately).


INVERTERS

E

6

= Std. Carton Qty.

151

ELECTRICAL


Samlex SSW Series Pure Sine Wave Inverters offer industry leading features and are ideal for powering office equipment, TVs, stereos, DVDs players, gaming systems, and other sensitive loads from your car, truck, boat, RV, or Solar System batteries. Value priced and rated at true continuous output, the Samlex SSW series is the simple choice whenever and wherever you need reliable, true sine wave power.

• Economically priced, reliably constructed• Compact and lightweight• High Surge: 2X Continuous Power• Provides clean and reliable True Sine Wave Power ideal for sensitive loads• Soft Start and Low Interference technology • 300 and 600W models have USB Charging Port• 1000, 1500, 2000W models have two GFCI receptaclesand include an LCD remote control with informative display

(Remote Model SSW-R1-12B)• Protections: Thermal, battery overload, short circuit &earth fault. • Backed with a 2 year warranty by one of the world's leading inverter manufacturers.

DC-AC Pure Sine Wave Inverters

High Efficiency micro-processor controlled Pure Sine Wave DC-AC inverters. Added Value: An LCD remote is included with every 1000W, 1500W and 2000W model!



L" x W" x H"AC

Outlets Warranty

14433 SSW-350-12A 350W Pure Sine Wave Inverter12 VDC 115 VAC

350W 8 x 6.2 x 2.2 Two(StandardNA outlet)

2 Year14474 SSW-600-12A 600W Pure Sine Wave Inverter 600W 9.2 x 6.2 x 2.3

14510 SSW-1000-12A 1000W Pure Sine Wave Inverter12 VDC 115 VAC

1000W 10.6 x 8.9 x 3.5Two

(NA GFCIoutlet)

2 Year17122 SSW-1500-12A 1500W Pure Sine Wave Inverter 1500W 12.2 x 8.9 x 3.5

14536 SSW-2000-12A 2000W Pure Sine Wave Inverter 2000W 12.4 x 8.9 x 3.5

SSW Series Inverters are Pure Sine Wave and are Listed by ETL to UL Safety Standard 458. NA stands for North American

Remote control panel with informative LCD window (SSW-R1-12B) and wiring isincluded at no extra charge with all 1000W, 1500W and 2000W models (see bellow).

14433

14474

Cool surface technology.

14536

1451017122

Order # Model Description AC Outlets

12927 SA-2000K-112 2000W Pure SineWave Inverter LS Two

14547 SA-3000K-112 3000W Pure Sine Wave Inverter Two

13009 S-R6-12 Inverter Remote Control for SA Series Inverters

SA-2000K-112Pure Sine Wave – DC-AC Power Inverter, 12 VDC - 110 VAC

• Pure sine wave output (THD < 3%). • Switch selectable output frequency: 50 / 60 Hz. • Switch selectable Power Save Mode wherein the inverter shuts off non essential circuitry and reduces its no load self consumption till it sees a minimum programmed load (40 - 280 Watts). • Optional wired remote controls for switching and monitoring the operation. Includes Ignition Lockout and Reverse Over-ride Function (ROF). • Input and output are fully isolated. • Advanced micro-controller. • 2 load controlled cooling fans save power consumption. • 3 tri-color LEDs display operational status and faultindications. • Protections: overload; short circuit; leakage; low and high DC input voltages; high temperature; reverse polarity. • Safety: Meets UL-458 (Pending listing). • EMC: Complies with FCC Part 15(B), Class A. • 16.6” L x 8.18” W x 6.53”. • 2-yr warranty.

SA-3000K-112 Pure Sine Wave Inverter High performance commercial grade DC-AC Power Inverter.

• CAN BE HARD-WIRED. • Isolated input and output. • Advanced microprocessor design. • 2 GFCI outlets. • Load controlled cooling fan. • Output frequency 50/60 Hz selectable. • Power save mode to conserve energy. • 2X Surge rating, 6000W. • Tri-Color LEDs indicate input/output levels andfailure status. • Protections: overload, short circuit, reverse polarity, over temperature, over/under input voltage. • Optional remote control S-R6-12 (Coast#13009; sold separately). • 2-yr. warranty.

Applications: Hard wire directly into the breaker panel of your boat or RV, will produce clean AC power identicalto household electricity! Run home and office appliances, portable devices or provide emergency back up power.

INVERTER REMOTE CONTROL -Pure Sine Wave, SA SERIES

• Designed for use with the following Samlex Pure Sine Wave Inverters: SA-1000K-112, SA-2000K-112 (Coast#12927) and SA-3000K-112 (Coast#14547). • Reverse override function. • 10 feet of wire included.• Bar Meter Monitor for battery voltage and output power. • LED indicator for: Over voltage protection, Under voltage protection, Over temperature protection, Over load protection and Power save mode.• 4.7” L x 5.1” W (120mm L x 130mm W). • ˆnp;iut Voltage: 12VDC. • 2-yr warranty.

13009

12927

14547

INVERTERS

E

152

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

ELECTRICAL

The NEW PST-UL family of DC-AC Pure Sine Wave Inverters are based on the robust PST series that RV'ers have come to depend on for years. Packed with added features and benefits, all of the NEW PSTs are safety listedto UL standards giving you peace of mind when it comes to reliable and safe AC power on the road.

PSTs provide clean and consistent AC power that is identical to household electricity. The 1000, 1500 and 2000 Watt models can be hardwired directly to the breakerpanel in your boat or mobile home so you can utilize the wall outletsjust asif you were connected to shore power!

Durably constructed with a focus on high efficiency, PST SeriesInverters are ideal for powering sensitive devices like TV's, stereos and home office equipment. PST's commercial grade design is also suitable for heavy duty loads, long periods of continuous operation, and for emergency back-up.

The NEW PSTs have extremely low electromagnetic interference and will notinterfere with other devices. This means you can install your inverter wherever it's convenient and not have to worry about disrupting the frequency of your TV, radio, or audio equipment. Forget the noisy operation you find with most inverters where the fans are load controlled, loudand running all the time. The NEW PST series uses an advanced temperature controlled cooling system that only operates when necessary, reducing energy consumption and eliminating noise.

Each PST model features two GFCI protected AC outlets for added protection against shock ordamage to your devices. The PSTs are loaded with safety features… Low input voltage shut down ensuresyour battery will never be completely discharged. The inverters also protect themselves against over temperature,over load, input over voltage and short circuit. All PST models are safety certified to a UL standard and FCC approved.

PST Series inverters are simple to install. Simply match your inverter to one of our Inverter Installation Kits and you'll have the cables, fusing and hardware necessary to make a safe and simple connection. If you would like to install your inverter out of sight, remote control panels are available for 600 to 2000 Watt models. Operate your inverter with the push of a button and monitor operation status with the convenient displays.

50135

50134

50138

50137

50136

SAMLEX NEW PST-UL Series Inverters



L" x W" x H"AC

Outlets Warranty Price

50134 PST-300-12 300W Pure Sine Inverter12VDC 120 VAC

300W 9.5” x 7” x 4.5”Two

(NA GFCIoutlet)

2 Year50135 PST-600-12 600W Pure Sine Inverter 600W 14” x 10.8” x 5.5”

50136 PST-1000-12 1000W Pure Sine Inverter 1000W 18” x 12” x 5.5”

50137 PST-1500-12 1500W P.Sine Inverter, Hardwireable12VDC 120 VAC

1500W 17.8” x 12.5” x 5.8” Two(NA GFCI

outlet)2 Year

50138 PST-2000-12 2000W P.Sine Inverter, Hardwireable 2000W 18” x 12.5” x 5.5”

PST Series Inverters are Pure Sine Wave and are Listed by ETL to UL Safety Standard 458. NA stands for North American

NEW!

RC-15A

• Optional remote control for 600 and 1000 Watt models • Comes with pin-type battery cable lugs.

50139 Remote forPST-600, 1000 (on/off);5” H x 2.5” W x 5.3”L

#RC-15A 4

Features PST-300-12

PST-600-12

PST-1000-12

PST-1500-12

PST-2000-12

High efficiency ✔ ✔ ✔ ✔ ✔Temperature controlled cooling fan ✔ ✔ ✔ ✔ ✔Low interference ✔ ✔ ✔ ✔ ✔ Wide operating DC input range:10.5 to 16.5 VD

✔ ✔ ✔ ✔ ✔

Protections: input low voltage,input over voltage, over temperature, over load, short circuit

✔ ✔ ✔ ✔ ✔

Low idle power draw ✔ ✔ ✔ ✔ ✔Dual GFCI protected AC outlets ✔ ✔ ✔ ✔ ✔ LED indicators for power & protections ✔ ✔Detachable cable with12V plug adapter ✔Detachable cable withbattery clamps ✔Optional remote control (sold separately)

RC-15A RC-15A RC-200 RC-200

Comes with pin-type battery cable lugs ✔ ✔ ✔ ✔

Can be hard wired ✔ ✔ RC-200

• Optional remote control for 1500 and 2000 Watt models • LCD Display.

50140 Remote for PST-1500, 2000 (LCD Display)#RC-200 1

50139

50140

Hardwireable


INVERTERS

E

6

= Std. Carton Qty.

153

ELECTRICAL

• High efficiency • Commercial Grade • Lightweight • Quiet operation • Industry Proven Design – 1000s of units in operation • 2 or 3 stage charging (user selectable)• 120 or 230 VAC, 50/60 Hz (user selectable)• Voltage meter display • For all types of Lead Acid batteries • Charge with a battery load or stand alone • Use as a power supply or DC UPS• UPC: Universal Protection Circuit – shortcircuit, overload, reverse battery polarity • “Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries • Remote LED panel with 33’ cable (Mfr#900-RC) for remote on/off control and indication of charging status (optional, sold separately) • Temperature Compensated Charging Circuit to prevent under/overcharging of battery if temperature varies extensively • Safety certified and listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B • 2-yr. Warranty.

50141

12V, 50A, 3-bank automatic battery charger, UL Listed

#SEC-1250UL

2

50142

12V, 80A, 3-bank automatic battery charger, UL Listed

#SEC-1280UL

2

900-RC -Remote Control for usewith SEC-1250UL and SEC-1280UL

(Coast #50141-50142; sold separately)

• ON/OFF Switch • LED Indicators; Green: Marked “U phase”, Indicates Float Stage; Yellow: Marked “Uo phase”, Indicates Boost/Absorption Stage; Red: Marked Power, Indicates ON/OFF. • 33’ of cable.

50141

NEW!

50142

SAMLEXAMERICASEC-UL BATTERY CHARGERS

FULLY AUTOMATIC

The all new SEC UL Series Battery Chargers are fully automatic and based on Samlex’s industry proved SEC design that profes-sionals have depended on for years. Packed with added features and certified to meet stringent UL safety standards, the SEC UL Series provides reliable charging and trouble free battery maintenance…

900-RC


17285

SAMLEX AMERICAINVERTER INSTALLATION KITS

Samlex Solar’s Inverter Installation Kits contain a pair of commerical grade high performance copper cables, a replaceable fuse and fusefixture, as well as all of the hardware neededto connect your inverter to a battery bank safely and simply. Kits are available in 4 models and should be sized according the continuousoutput rating of your inverter.

DC-1000-KIT

• For use with 600-1000W inverters (12V). • Includes: 2 x 10' AWG #4 cables, 100 Amp replaceable fuse and assembly,and all necessary hardware.

17178 100 Amp Inverter Installation Kit#DC-1000-KIT 5

DC-2000-KIT

• For use with 1000-2000W inverters (12V).• Includes: 2 x 10' AWG #2 cables, 200 Amp replaceable fuse and assembly, and all necessary hardware.

17285 200 Amp Inverter Installation Kit(Pictured) #DC-2000-KIT 5

DC-2500-KIT

• For use with 2000-2500W inverters (12V).• Includes: 2 x 10' AWG #2\0 cables,300 Amp replaceable fuse and assembly, and all necessary hardware.


DC-3500-KIT

• For use with 2500-3500W inverters (12V).• Includes: 2 x 10' AWG #2\0 cables,400 Amp Fuse Block with replaceable fuse,and all necessary hardware.


17365

SAMLEX AMERICAFUSE ASSEMBLIES AND REPLACEMENT FUSES

Do you already have a set of inverter cables but need a fuse assembly? Maybe you havea fuse assembly but need to replace an individual fuse? Either way, we’ve got you covered. Samlex fuse assemblies and replacement fuses are also sold separately.

NEW! FUSE BLOCK17431 Fuse Block with 400A replaceableterminal fuse #CFB2-400 30

NEW! DOUBLE POLE FUSE BA R WITH INSULATING CAP (NO FUSE)

For installations where two different size fuses are required.

17395 Double pole fuse bar with insulatingcap and hardware #DC-FB-2 1

17431

17395

17374

17393

17398

NEW!

NEW! REPLACEMENT FUSES17373 100A Replacement Fuse #MRBF-100 117374 200A Replacement Fuse #MRBF-200 117393 300A Replacement Fuse #MRBF-300 117398 400A replacement terminal fuse (for use in Fuse Block) #JLLN-400 1

FUSE ASSEMBLIES *

Each contains a single pole fuse bar, MRBF replaceable fuse, insulating capand required hardware.

17364 100 Amp Fuse Assembly#DC-FA-100 1



17373

* See also page 133

for more infoson the

fuse assemblies

INVERTER ACCESSORIES

E

154

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

ELECTRICAL

True sine wave inverters eliminate incompatibility and performance issues - such as lines on TV screens - by supplying electricity that is the same or better quality than the utility power supplied to your home.

Why upgrade to true sine wave?

Xantrex PROsine™1800 True Sine Wave Inverter

• True sine wave output• 1000 watt inverter (1500W surge) / 1800 watt

inverter (2900W surge)• Includes removable LCD display • Remote interface kit accessory available for

mounting remotely• Options include hardwire with 15 A transfer

switch or dual GFCI AC outlet models• Approved to the UL 458 regulatory standard

PROsine™ Inverter and Inverter/Chargers

Benefits of power factor corrected charging:PROsine™ inverter/chargers use power factor corrected charging to minimizethe AC amp draw of the charger, reducing nuisance tripping on shore powerbreakers. Power factor corrected charging converts the AC input power more effectively, requiring significantly less AC input current to produce the same high output charge current.

www.xantrex.com

Order # DescriptionContinu-

ousPower

SurgeRating

PeakOut-put

ChargerOut-put

DimensionsL" x W" x H" Weight

ACConnec-

tion

Built-In

Transfer

18581

Back by popular demand!

Prosine 1000 (Inverter Only)

1000 W 1500 W 15 A N/A15.4 x 11 x 4.5

14.5 lb Dual GFCI N/A

18584PROsine™ 1800with Hardwire andTransfer switch

1800 W 2900 W 45 A N/A15.4 x 11 x 4.5

16.5 lb Hardwire 15A

All items include Remote & 24 Month Warranty

Xantrex™

INVERTER GENERATORSBEGIN ON PAGE 178


INVERTERS

E

6

= Std. Carton Qty.

155

ELECTRICAL


Freedom 458 2000 & 2500 Inverter/Chargers:• Modified sine wave AC runs most equipment. • Three stage battery charger recharges batteries quickly while protecting your battery bank. • Programmable front panel and LED indicators. • Temperature sensitive charging provides optimal care of all types of deep cycle batteries. • Built-in 30 amp transfer switch automatically transfers between inverter power and incoming AC power.• Power sharing prevents nuisance tripping of shore power breaker. • Customized settings can be programmed with the Xantrex Freedom Basic Remote or Xantrex Link 1000 panel. • Option of dual input and dual output connections for easy installation • 30 month warranty. • Approved to theUL 458 regulatory standard.

With filtered modified sine wave output, Freedom inverter/chargers runvirtually anything, from office equipment to household appliances and electronics. Temperature controlled multi-stage charging ensures that your batteries are recharged quickly when supplied with electricity from your RV’s generator or campground hookup. Automatic low/high DC voltage shutdown and other safety features help to protect your expensivedeep-cycle batteries from excessive depletion.

For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link 1000 remote panel.

Trusted Inverter/Charger solutions with multi-stage charging and high surge capability

Freedom Inverter/Charger SeriesXantrex™

Order # DescriptionPOWER AC

Dimensions WeightAC Connection

Continuous Surge Charger Input Output

16922 Freedom HF 1000 1000 W 2000 W 20 A 4.2”H x 9.5”W x 15.5”L 10 lb Single Double

16923 Freedom HF 1800 1800 W 3600 W 40 A 4.2”H x 9.5”W x 18”L 12.8 lb Single Double

11803 Freedom 458 20 12 2000 W 50 A 100 A 14" L x 11.5" W x 7.75" H

45 lb Single Single11804 Freedom 458 25 12 D/D 2500 W 62.5 A 130 A 50 lb Dual Dual11029 Freedom SW 3000: Automatic Generator Start*

www.xantrex.com

Freedom HF1000 & 1800 Inverter/Chargers:The new generation Xantrex Freedom HF Inverter/Charger is the smallest, lightest, and most affordable inverter/charger from Xantrex. Available in two sizes, 1000 watts with a 20-amp charger and 1800 watts with a 40-amp charger, there is a model to suit most applications. One of the key feature enhancements include quick-connect AC terminal block on both AC input and output for quick installation. Ignition lockout feature minimizes unnecessary battery drain.All models are designed to be hardwired using quick-connectAC terminals or by connecting AC through GFCI receptacles. The advanced three-stage charging helps ensure that your batteries are recharged quickly and efficiently. Both models include an automatic transfer switch and a detachable digital remote control panel display that provides precise system infor-mation. Both models meet UL458 and FCC, Class B requirements. Powering challenging loads such as microwave ovens, TVs, DVD players, small appli-ances and other electronic equip-ment, the Freedom HF proves that big power can come in small, lightweight packages.

11029

Xantrex™ Freedom SW Automatic Generator Start (AGS)The Xantrex Freedom SW Automatic Generator Start (AGS) is a Xanbusenabled device that can automatically activate a generator to provide Freedom SW series inverter/charger with power to recharge depletedbatteries or assist with heavy loads. Compatible with popular generators, the AGS adds intelligence to power management and eliminates time spent monitoring batteries and inverter loads. The AGS can be customized to suit each user's preferences. A user can define whether the generator should be activated by low battery voltage, battery state of charge, thermostat operation, or load size on the inverter. A Quiet Time setting prevents the generator from starting at inconvenient times like nightfall. LED lights display the status of the AGS, while all user defined settings are programmed through the Xantrex Freedom SW System Control Panel (SCP). Compatible with both 12V and 24V new generation Freedom SW models (Coast#19526-19564 and Mfr#815-2024 & 815-3024).

INVERTERS/CHARGERS

E

156

◆

Not UPS-able;

▲

Hazmat terms apply;

LS

Limited Supply

ELECTRICAL

Freedom SW Inverter/Charger SeriesXantrex™

Order # DescriptionPOWER AC

DimensionsAC Connection

Continuous Surge Charger Input Output

19526 Freedom SW 2012 2000 W 4000 W 120 Vac15.25”L x 13.5”W x 7.75”H(38.7cm x 34.3cm x 19.7cm)

Single Single

19564 Freedom SW 3012 3000 W 6000 W 120 Vac SplitDual

DualDual

19493 Freedom System Control Panel for both models50132 Network Cable 25’ (For connecting Freedom SW 2012-3012 to Control Panel Coast#19493)

POWERFUL. CONFIGURABLE. VERSATILE...

The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. The second generation 2000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart. A key feature enhancement is ‘Generator Support Mode’ which enables the Freedom SW to supplement a generator1 when AC loads exceed the generator’s capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.

Parallel and Series Stacking - NEW FEATURE

• Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. • Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2

Application

• Designed for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.

Product Features

• Pure sine wave output to operate sensitive electronics• Advanced configuration options for customized applications• Built-in transfer switch automatically transfers between inverter power and incoming AC power• Power factor corrected multi-stage charger for fast, efficient charging• Temperature compensated charging for most climate conditions• Ignition lockout feature helps to minimize unnecessary battery drain3

• Full inverter output up to 40°C (104°F) for 3000W model; 30°C (86°F) for 2000W model• Conformal coated circuit boards for humid environments• Dual input / Dual output AC interface for 3000 W model only• Ability to charge batteries drained to extremely low voltage

Protection Features

• Battery over-voltage and under-voltage protection• Over-temperature shutdown • Automatic overload protection• Short-circuit protection • Integrated, resettable AC breakers1 Compatible with most generator brands 2 AC source must be split phase, requires Stacking Cable (part# 808-9005) 3 When used with On/Off Remote Panel sold separately.

19526

Certified toCSA StandardC22.2 No. 107.1UL 458 with marinesupplementFCC Class B

NEW!

This product has undergone rigorous testingunder extreme thermal & mechanical conditions

19564

Xantrex™ Freedom SW System Control Panel (SCP)The Xantrex Freedom SW System Control Panel (SCP) features a graphical, backlit LCD screen that displays system configuration and diagnostic infor-mation in one central location. Large keypad buttons, an intuitive onscreen menu system, and plain text status messages make it easy to configure and operate. By providing basic controls for other devices connected to thenetwork, the SCP reduces the complexity of separate control panels for each device. The SCP is Xanbus Enabled and easily connects to Freedom SW Inverter/Charger and other devices with off-the-shelf network cables, making installation quick and easy. Compatible with both 12V and 24V new generation Freedom SW models (Coas#19526-19564 and Mfr# 815-2024 & 815-3024).

19493

www.xantrex.com

FREEDOM SW INVERTER/CHARGERS by XANTREX


INVERTERS/CHARGERS

E

6

= Std. Carton Qty.

157

ELECTRICAL


The difference between charging your battery and just thinking you did!

TrueCharge2 Battery ChargersXantrex™

TrueCharge2 Battery Chargers 20A & 40A, 12-VoltIn addition to meeting global safety and regulatory standards, TRUECHARGE2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging. TRUECHARGE2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof design. With certified ignition protection, even a gasoline engine room is an alternative for installation*. Trouble-free installation is ensured with easy-to-access AC and DC wiring compartments and reverse-polarity battery protection.

Designed primarily for marine, RV and commercial applications worldwide, TRUECHARGE2 Battery Chargers are unmatched for reliability. Available in two 12-volt models, they are versatile enough to be used in a wide variety of conditions and locations. Auto-ranging AC input voltage capability (90 - 265 volts AC) makes traveling abroad and handling poor-quality powera breeze. The easy-to-read display can be augmentedwith an optional remote panel.

TRUECHARGE™ 2 Battery ChargerRedesigned, High Performance, Worldwide Charging Xantrex TRUECHARGE™2 Battery Chargers lead the industry with a small footprint and ultra-compact design.

Order # Description ChargeCurrent Installation DC

OutputBattery

TypeTemperature

CompensationDimensionsH" x W" x L" Weight Warranty

17928 TrueCharge2 20A-12V 20 amps hardwire Three AGM, gel,flooded, Pb-Ca

manual switch, or optionalremote auto sensor 2.8 x 6.7 x 9.8 4.8 lb. 2 Year.

17860 TrueCharge2 40A-12V 40 amps hardwire Three AGM, gel,flooded, Pb-Ca

manual switch, or optionalremote auto sensor 2.8 x 6.7 x 9.8 4.8 lb. 2 Year.

TRUECHARGE2 products accept 90 to 265 VAC, 47/63 Hz input. * Xantrex recommends, however, that it is safest not to install electrical equipment in these areas.

The PROwatt SW series inverters provide true sine wave AC power to operate electronicsincluding entertainment systems, variable speed power tools, appliances and much more. With high surge capability, it provides the necessary current to startup demanding electrical loads.

• Available in three power levels: 600 watts, 1000 watts and 2000 watts. • Built-in digital display for DC volts and output power. • Built-in USB port to power USB-powered devices. • Dual GFCI AC receptacles for safe operation. • Industry standard protection features such as low voltage shutdown (10.5 Vdc), low voltage alarm (11.0 Vdc), over-voltage protection (15.5 Vdc), over loadand over temperature shutdown and ground fault protection.• Optional On/Off Remote Control Panel

Order # Description Max AC Power

Surge Capacity

DC Connection

AC Output

USB Output

Recommend DC Fuse

DimensionsH" x W" x L" Weight Warranty

10678 Prowatt SW 600 Inverter 600W 1200W hardwire Dual GFCI 5V/500 mA 150A 3.5 x 8.7 x 12.2 6.5 lb. 2 Year

10689 Prowatt SW 1000 Inverter 1000W 2000W hardwire Dual GFCI 5V/500 mA 150A 3.5 x 8.7 x 13.4 7.2 lb. 2 Year

10693 Prowatt SW 2000 Inverter 2000W 3000W Hardwire Dual GFCI 5V/500mA 150A 3.9 x 11.8 x 13.7 10.7 lb. 2 Year

Regulatory Compliance: UL458 – 5th Edition - Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts.

PROwatt SW Inverters

www.xantrex.com

Xantrex™

10689

10693

INVERTERS/CHARGERS

E


ELECTRICAL

Advanced Charge Monitoring

Power Management Made Easy

Freedom Basic Remote Control• Controls all 458 FreedomRV inverter/charger units. • Compatible with older black Freedom units. • Easy to read multi-colored LEDs. Display Monitor Information. • Approximate battery state.• DC amps and voltage. Push button control of: • Power sharing. • Equalizing. • Independent inverter and charger on/off.

Take the guesswork out of understanding your inverter/charger and batterysystem. The LinkPro, LinkLite Battery Monitors & Freedom remote display let you know how much power you have left and just how much longer it will take to recharge. From one panel, you’ll have complete battery-state-of-charge information for battery banks, and with just a touch of the keypad, you’ll be able to independently control inverter and charger functions.

Freedom Echo Charge• Automatically charges anauxiliary or starter battery from your inverter/charger. • Dualbattery bank charging for main-taining coach and engine battery banks. • 15 A maximum charge current. • Switches on/off without affecting in-house battery bank or overcharging.

11807 11812

www.xantrex.com

Xantrex™

Order # DescriptionControls FreedomInverter/Charger

Display Type

DC VoltDisplayed

DC AmpsDisplay

Amp HourConsumedDisplayed

Time RemainingDiplay

Shunt DimensionsL" x W" x H" Warranty

17932 LinkLite Battery Monitor Yes LED Yes Yes n/a n/a Yes 2.54 x 2.05 x 3.11 12 Mo.

17980 LinkPro Battery Monitor Yes LED Yes Yes n/a n/a Yes 2.54 x 2.05 x 3.11 12 Mo.

11807 Freedom Basic Remote Yes LED Yes Yes No No n/a 5.75 x 3.75 x 1.0 12 Mo.

11812 Freedom Echo Charger #82-0123-01

LinkLITE Battery MonitorBattery Status At A Glance! The LinkLITE battery monitor can measure currents up to 1,000Amps. It selectively displays voltage, charge and discharge current, consumed amp hours and remaining battery capacity. It is equipped with an internal program-mable alarm relay, to run a genera-tor when needed or to turn off devices when the battery voltage exceeds programmable boundaries.

Performance Features:

• Read your battery bank like a fuel gauge. • Provides critical informa-tion about the status of your battery bank. • Displays voltage, current, consumed amp hours andremaining battery capacity. • Secondary battery bank voltage monitoring. • Auto sensing battery voltage inputs. • Large backlitLCD Display. • Quick nut mounting construction. • Programmable alarm relay. • Shunt selection capability enables flexible system integration. • Splash proof frontpanel. • 500 Amp shunt included. • CE and e-mark certified.

LinkPRO Battery MonitorSame great features of the LinkLite plus the LinkPRO can measure currents up to 10,000 Amps. It selectively displays voltage, charge and discharge current, consumed amp hours, remaining battery capacity and the time remaining of your battery bank.

Performance Features:

• Read your battery bank like a fuel gauge. • Provides critical informa-tion about the status of your battery bank. • Displays voltage, current, consumed amp hours and remain-ing battery capacity. • Secondary battery bank voltage monitoring. • Auto sensing battery voltage inputs. • Large backlit LCD Display. • Quick nut mounting construction. • Programmable alarm relay. • Shunt selection capability enables flexible system integration. • Splash proof frontpanel. • 500 Amp shunt included. • CE and e-mark certified. • Displays time remaining. • Com-munication/expansion port. • Stores a wide range of history events in internal memory. * Advancedprogrammable alarm relay. • Battery temperature sensor input.

17980 17932


INVERTERS & ACCESSORIES

E



WFCO CONVERTERS, COME WITHTHE FOLLOWING FEATURES AND SAFETY PROTECTION:

Features: • 3 Stage battery charging system. • Two 30 amp fuse positions on 8900 fuse boards. • 150 amp rated 8900 DC fuse boards. • LED fuse boards. • UL, cUL-Listed FCC Class B.

Protection: • Reverse Polarity. • Over Temperature. • Short Circuit. • Overload. • Over-current. • Current controlled fan.

Select WFCO products as your replacement converter of choice.

You can easily add a high performance converter to your RV. Take the guesswork out of choosing the right replacement converter by using the replacement charts below. Dimensions are provided to assist with proper form and fit.

15501 35Amp DC #WF-8935-MBA 115516 45Amp DC #WF-8945-MBA 115528 55Amp DC #WF-8955-MBA 115733 65Amp DC #WF-8965-MBA 115757 75Amp DC #WF-8975-MBA 1

M A I N B O A R D A S S E M B L Y

R E P L A C E M E N T

WFCOMfr#

Description Parallax

8945REP 45 Amp DC 73458955REP 55 Amp DC 73558945MBA 45 Amp DC 71458955MBA 55 Amp DC 7155

MAINBOARDASSEMBLIES

Replaces the lower powerconverter section on any WF-8900 Series converter. Installseasily with only 4 screws and five wires.

P O W E R C E N T E R S

WFCOMfr#

DescriptionDimensions

Cut-out (W x H x D)ProgressiveDynamics

Parallax Atwood Elixir

8712 12 Amp DC 10-7/16 x 6-1/8 x 3-3/4 - - - ELX128725 25 Amp DC 10-7/16 x 6-1/8 x 3-3/4 - - - ELX20/258735 35 Amp DC 10-7/16 x 6-7/8 x 3-3/4 - - - -8740 40 Amp DC 10-7/16 x 6-7/8 x 3-3/4 - - - -8935 35 Amp DC 12-3/16 x 10-7/8 x 7-1/4 - 7335 - ELX358945 45 Amp DC 12-3/16 x 10-7/8 x 7-1/4 PD4045 7345 - ELX458955 55 Amp DC 12-3/16 x 10-7/8 x 7-1/4 - 7355 APS5530 ELX608965 65 Amp DC 12-3/16 x 10-7/8 x 7-1/4 - - - -8975 75 Amp DC 12-3/16 x 10-7/8 x 7-1/4 - - - -

D E C K M O U N T C O N V E R T E R S

WFCOMfr#

DescriptionDimensions (W x H x D)

ProgressiveDynamics

Parallax Atwood Iota Elixir

9835 35 Amp DC 4-5/8 x 4 x 7-1/2 PD9130 7430 32 DSL-30 -

9845 45 Amp DC 4-3/4 x 4 x 8-3/4 PD9140/45A& PD9245 7445 45 DSL-45 -

9855 55 Amp DC 4-3/4 x 4 x 8-3/4 - 7455 55 DSL-55 -

9865 65 Amp DC 5-1/8 x 4 x 10-1/4 PD9160A/PD9260 7465 - - DM6000

9875 75 Amp DC 5-1/8 x 4 x 10-1/4 PD9170A/PD9270 - 35414 DSL-75 DM8000

68100 100 Amp DC 7-5/8 x 4 x 12-11/16 PD9180A/PD9280 - - DSL-90 -

The WF-8900 series converter provides superior performance offering eleven 12 volt DCcircuits and up to five 110 volts AC circuits.

CONVERTER/CHARGER, BLACK15482 55A, Black #WF-8955-PECB 115497 65A, Black #WF-8965-ANPB 1

CONVERTER/CHARGER, BROWN15458 35A, Brown #WF-8935-ANP 115462 45A, Brown #WF-8945-ANP 115481 55A, Brown #WF-8955-PEC 115496 65A, Brown #WF-8965-ANP 115499 75A, Brown #WF-8975-ANP 1

WF-8900SERIESPOWER CENTERCONVERTER/CHARGERAC/DC DISTRIBUTION

WF-8700 SERIES POWER CENTER CONVERTER/CHARGER AC/DC DISTIBUTION

Get big performance up to 40 amps DC output. The WF-8700 series provide superior perfor-mance offering four to six 12 volt DC circuitsand three to five 110 volts AC branch circuits (depending on the model).

CONVERTER/CHARGER, BLACK15396 25A, Black #WF-8725-PB 115445 35A, Black #WF-8735-PB 1

CONVERTER/CHARGER, BROWN15393 12A, Brown #WF-8712-P 115395 25A, Brown #WF-8725-P 115415 35A, Brown #WF-8735-P 116731 40A, Brown #WF-8740-P 1

The versatile, advanced power source solution. Output ratings from 35 amps DC to 100 amps DC. Convenient deck-mount installation.

WF-9800 SERIES15761 35A #WF-9835 115765 45A #WF-9845 116843 55A #WF-9855 115797 65A #WF-9865 115824 75A #WF-9875 1

15832 45A #WF-8945REP 115839 55A #WF-8955REP 1

WF-9800 SERIES DECK-MOUNT CONVERTER/CHARGER

UNIVERSAL CONVERTERREPLACEMENTKIT

8900REP models makeit easy to replace certainbrands of converters with removable converter section.

CONVERTERS/CHARGERS

Documents

E ELECTRICAL BATTERY ACCESSORIES...E 6 = Std. Carton Qty. 139 ELECTRICAL In Section E: Meters/Testers Wiring Fuses 12V Accessories Battery Accessories Chargers & Inverters Cords &