2
Eagle Scanner Receiver | Long Term Evolution (LTE) FDD / TDD Transcom’s Eagle LTE Scanner supports both TDD-LTE and FDD-LTE. This high speed scanner is used for scanning the air-interface in the mobile wireless network. Unlike user equipment, this scanner works such a way that it is independent to the network and therefore, it is highly suitable for use in network optimization. Eagle Scanner Receiver for LTE is a DSP-based software radio that is widely deployed on the field to carry out Cell Tower Site Survey, Base Station Monitoring, Wireless Coverage Analysis and Network Optimization. SD Card slots – data saving in the box Test and measurement of CW and LTE Pilot signals Measurement of reference signal such as RSSI, RP, RQ, Timing, CINR, Number of Antenna, etc. Measurement of P-SCH & S-SCH channels which includes RSSI, RP, RQ, Timing, PCI, etc. Timeslot measurement and PBCH measurement such as Constellation, EVM and BLER Powerful co-channel cell detection capability of up to 20 dB Layer 3 message decoding Main Features Indoor testing Wireless signal coverage and interference testing Test for Tuning of the Propagation Model for network planning Testing of Two module neighboring cell network handover check

Eagle Scanner Receiver | Long Term Evolution (LTE)trinergy.co.th/pdf/eagle_lte_scanner_pb.pdfEagle Scanner Receiver | Long Term Evolution (LTE) FDD / TDD Transcom’s Eagle LTE Scanner

Embed Size (px)

Citation preview

Page 1: Eagle Scanner Receiver | Long Term Evolution (LTE)trinergy.co.th/pdf/eagle_lte_scanner_pb.pdfEagle Scanner Receiver | Long Term Evolution (LTE) FDD / TDD Transcom’s Eagle LTE Scanner

Eagle Scanner Receiver | Long Term Evolution (LTE) FDD / TDD

Transcom’s Eagle LTE Scanner supports both TDD-LTE and FDD-LTE. This high speed scanner is used for scanning the air-interface in the mobile wireless network. Unlike user equipment, this scanner works such a way that it is independent to the network and therefore, it is highly suitable for use in network optimization. Eagle Scanner Receiver for LTE is a DSP-based software radio that is widely deployed on the field to carry out Cell Tower Site Survey, Base Station Monitoring, Wireless Coverage Analysis and Network Optimization.

SD Card slots – data saving in the box

Test and measurement of CW and LTE Pilot signals

Measurement of reference signal such as RSSI, RP, RQ, Timing, CINR, Number of Antenna,

etc.

Measurement of P-SCH & S-SCH channels which includes RSSI, RP, RQ, Timing, PCI, etc.

Timeslot measurement and PBCH measurement such as Constellation, EVM and BLER

Powerful co-channel cell detection capability of up to 20 dB

Layer 3 message decoding

Main Features

Indoor testing

Wireless signal coverage and interference testing

Test for Tuning of the Propagation Model for network planning

Testing of Two module neighboring cell network handover check

Page 2: Eagle Scanner Receiver | Long Term Evolution (LTE)trinergy.co.th/pdf/eagle_lte_scanner_pb.pdfEagle Scanner Receiver | Long Term Evolution (LTE) FDD / TDD Transcom’s Eagle LTE Scanner

Battery (option)

Battery Lithium battery, 11000 mAH Nominal Voltage 11.1 V Nominal Capacity 11 AH Internal Resistance ≤60 mΩ Charging Voltage 12.6±0.15 V Discharge Cut-off Voltage 9 V Weight 0.325 kg

Temperature Operating: -20°C to +60°C Storage: -20°C to +60°C Removable Storage (option)

Eagle LTE Scanner Receiver comes with 2 Micro SD slots for data saving on the move. Eagle Scanner Receiver - Specification Overview

RF Performance

Sensitivity, RSRP -130 dBm @20MHz (RSRP)

Accuracy ±1.0 dB SINR Dynamic Range -20 dB to +30 dB MIMO Support Yes Co-channel Cells Detection ≥20 dB

Measurement Rate

1000 channel/s (CW) @ Single RF Carrier 800 channel/s (CW) @ Single RF Carriers 12 times/s (Pilot) @ Single RF Carrier

Freq. Spectrum Measurement Rate 50 MHz/s Measurement Bandwidth 1.4, 3, 5, 10, 15, 20 MHz Slot Accuracy 1 Ts Physical

Power +8 to +16 VDC; 1.2A max@+12 VDC

Size 210 × 130 × 100 mm

Weight (without battery) 1 kg

Temperature Ranges Operation: 0 to 50°C Storage: -40 to 85°C

Connectors Scanner RF Input: SMA(f) (50 Ω) GPS RF Input: SMB(m) (50Ω) Data Connection: LAN

Customizable LTE Band according to the table below: FDD-LTE Band Table

LTE Band Uplink (MHz) Downlink (MHz) 1 1920 - 1980 2110 - 2170 2 1850 - 1910 1930 - 1990 3 1710 - 1785 1805 -1880 4 1710 - 1755 2110 - 2155 5 824 - 849 869 - 894 6 830 - 840 875 - 885 7 2500 - 2570 2620 - 2690 8 880 - 915 925 - 960 9 1749.9 - 1784.9 1844.9 - 1879.9

10 1710 - 1770 2110 - 2170 11 1427.9 - 1452.9 1475.9 - 1500.9 12 698 - 716 728 - 746 13 777 - 787 746 - 756 14 788 - 798 758 - 768 15 1900 - 1920 2600 - 2620 16 2010 - 2025 2585 - 2600 17 704 - 716 734 - 746 18 815 - 830 860 - 875 19 830 - 845 875 - 890 20 832 - 862 791 - 821 21 1447.9 - 1462.9 1495.5 - 1510.9 22 3410 - 3500 3510 - 3600 23 2000 - 2020 2180 - 2200 24 1625.5 - 1660.5 1525 - 1559 25 1850 - 1915 1930 - 1995

Product specification and description in this document subject to change without notice

TDD-LTE Band Table

LTE Band Allocation (MHz) 33 1900 - 1920 34 2010 - 2025 35 1850 - 1910 36 1930 - 1990 37 1910 - 1930 38 2570 - 2620 39 1880 - 1920 40 2300 - 2400 41 2496 - 2690 42 3400 - 3600 43 3600 - 3800

EMAS – Eagle Measurement & Analysis System is automatic signal measurement and analysis software that can be interfaced with Eagle Scanner Receivers. It includes GPS and utilizing readily available map to create a coverage verification system that meets your requirements.

LTE – RP Measurement Location Map, Cell Coverage Statistic and Cell Coverage Analysis

In The Package Eagle Scanner base unit, Outdoor and GPS antenna, LAN cable and AC-DC Adapter. Ordering Information Eagle LTE Scanner Receiver is a dual-technology scanner with two changeable module slots.

Part Number Description

T213X TDD-LTE Scanner Module

T214X FDD-LTE Scanner Module

Base unit comes with built-in GPS module

Optional Accessories Part Number Description NT102022 Outdoor Antenna Assembly

NT102056 Scanner Battery Suite NT102012 GPS Antenna Assembly NT002808 EMAS (CD & USB Key)

NT104001 Backpack

NT102060 LAN Cable

Transcom Instruments Co., Ltd

4F Building 28, No. 69 GuiQing Road, XuHui District, Shanghai, China 200233

(86) 21 6432 6888 (86) 21 6432 6777

[email protected]

www.transcom-instruments.com