1/3

Elisabeth T. Bowman: Publications (asterisk denotes journal)

1. Yusa, M. & Bowman, E.T. (2013) "Quantification of time-dependent microstructural change in a silty sand under load" Powders & Grains, Sydney, 2013.

2. Yusa, M. & Bowman, E.T. (2013) “Measurement and change in microstructure of loose silty sand due to ageing" 18th Southeast Asian Geotechnical & Inaugural AGSSEA Conference, Singapore, 2013.

3. *Bowman, E.T., Take, W.A., Rait, K. & Hann, C. (2012) “Physical models of rock avalanche spreading behaviour with dynamic fragmentation” Canadian Geotechnical Journal, 49(4), 460-476.

4. *Jackson, P., Bowman, E.T., & Cubrinovski, M. (2012) “Seismic testing of model-scale geosynthetic reinforced soil walls”, Bulletin of the New Zealand Society for Earthquake Engineering 44(4).

5. *Sanvitale, N. & Bowman, E.T. (2012) “Internal imaging of saturated granular free surface flows”, International Journal of Physical Modelling in Geotechnics , 12(4): 129–142, DOI: 10.1680/ijpmg.12.00002..

6. *Rait, K., Bowman, E.T. & Lambert, C. (2012) "Dynamic fragmentation of rock clasts under normal compression in sturzstrom" Géotechnique Letters, 2(3), 167-172, DOI: 10.1680/geolett.12.00038.

7. *Pender, M.J., Wotherspoon, L., Cubrinovski, M., Bowman, E.T. & Orense, R. (2012) “Evidence of earthquake induced liquefaction obtained from GeoEye-1 images”, Géotechnique Letters, 2(2), 49-53, DOI: 10.1680/geolett.11.00042.

8. Letham, M., Kennedy, B., Bowman, E., Scheu, B., Jolly, A., Mayer, K., Heap, M., Dougherty, A., Reuschlé, T., Smid, E., Ogawa, H., Win, N. & Dingwell, D.B. (2012) "Near-surface controls on gas escape at White Island Volcano prior to the August 5th 2012 eruption" GeoSciences 2012, 25-28 November 2012, Hamilton, New Zealand.

9. Rait, K., Bowman, E.T. & Lambert, C. (2012) “Modelling the shearing behaviour of sturzstrom” 11th International Symposium on Landslides, 3-8 June 2012, Banff, Canada.

10. Tatarniuk, C.M. & Bowman, E.T. (2012) “Two dimensional numerical modelling of landslide stabilizing Deep Soil Mixing columns” 11th International Symposium on Landslides, 3-8 June 2012, Banff, Canada.

11. Tatarniuk, C. & Bowman, E.T. (2012) “Case study of a road embankment failure mitigated using Deep Soil Mixing”, 4th International Conference on Grouting and Deep Mixing, 16-18 February 2012, New Orleans, USA.

12. *Bowman, E.T, Jackson, P., Cubrinovski, M. & Fannin, R.J. (2011) “Progressive failure and shear band development within model-scale reinforced soil walls subject to seismic shaking” Géotechnique Letters DOI: 10.1680/geolett.11.00030.

13. *Acharya, G., Cochrane, T.A., Davies, T. & Bowman, E. (2011) “Quantifying and modeling post-failure sediment yields from laboratory scale soil erosion and shallow landslide experiments with silty loess” Geomorphology 129 (1-2), 49-58.

14. Sanvitale, N., Bowman, E.T. & Genevois, R. (2011) “Experimental measurements of velocity through granular-liquid flows”, 5th International Conference on Debris Flow Hazards Mitigation, Padua, Italy.

2/3

15. Kailey, P., Bowman. E.T., Springman, S. & Laue, J. (2011) “Modeling Debris flow behavior in a geotechnical centrifuge”, 5th International Conference on Debris Flow Hazards Mitigation, Padua, Italy.

16. Rait, K. Bowman, E.T. & Hann. C. (2011) “Removing the Coriolis effect from centrifuge model data of high-speed rock avalanche spreading” 13th International Conference of the International Association for Computer Methods and Advances in Geomechanics, (IACMAG 2011), 9-11 May, Melbourne, Australia.

17. *Cubrinovski, M., Green, R.A., Allen, J., Ashford, S., Bowman, E.T., Bradley, B., Cox, B., Hutchinson, T., Kavazanjian, E. Orense, R., Pender, M., Quigley, M. & Wotherspoon, L. (2010) “Geotechnical reconnaissance of the 2010 Darfield (Canterbury) earthquake” Bulletin of the New Zealand Society for Earthquake Engineering 43 (4), 243-320.

18. *Cubrinovski, M., Orense, R. & Bowman, E. (2010) “Case History 2010 Earthquake in New Zealand”. ISSMGE Bulletin, 4(4), 15-25.

19. *Bowman, E.T., Laue, J. Imre, B. & Springman. S. M. (2010) “Experimental modelling of debris flow behaviour using a geotechnical centrifuge”. Canadian Geotechnical Journal 47(7), 742-762.

20. Cubrinovski, M., Rees, S. & Bowman, E.T. (2010) “Effects of non-plastic fines on liquefaction resistance of sands”, M. Garevski (Ed.) Chapter In European Earthquake Engineering: Springer

21. Rait, K. & Bowman, E.T. (2010) “Dynamic fragmentation in rock avalanches: a numerical model of mechanical behaviour” 7th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE 2010), 2-5 June, Trondheim, Norway.

22. Fannin, R.J. & Bowman, E.T. (2010) “Debris flows - entrainment, deposition and travel distance”. Proc. 11th International Association of Engineering Geology (IAEG) Congress: Geologically Active, Auckland: CRC Press.

23. Kailey, P., Bowman, E.T. & Massey, C. (2010) “Field investigation of small debris flow events in New Zealand mountain catchments”, Proc. 11th International Association of Engineering Geology (IAEG) Congress: Geologically Active, Auckland: CRC Press.

24. Davies, M.C.R., Bowman, E.T. & White, D.J. (2010) “Keynote: Physical modelling of natural hazards”, 7th International Conference on Physical Modelling in Geotechnics, Zurich, Switzerland.

25. Sanvitale, N., Bowman, E.T. & Genevois, R. (2010) “Optical investigation through a flowing saturated granular material”, 7th International Conference on Physical Modelling in Geotechnics, Zurich, Switzerland.

26. *Acharya, G., Cochrane, T.A., Davies, T. & Bowman, E. (2009) “The influence of shallow landslides on sediment supply: A flume-based investigation using sandy soil.” Engineering Geology, 109 (3-4), 161-169.

27. Bowman, E.T. & Sanvitale, N. (2009) “The role of particle size in the flow behaviour of saturated granular materials”. 17th International Conference on Soil Mechanics & Geotechnical Engineering, 5th-9th Oct, Alexandria, Egypt.

28. Bowman, E.T. (2008) Proceedings of 6th ANZ Young Geotechnical Professionals’ Conference, Editor, 5th-8th November 2008, Wellington

29. Bowman, E.T. & Davies, T.R. (2008) “The recognition and identification of debris flow hazards for proposed development sites in New Zealand”. 18th New Zealand

3/3

Geotechnical Society (NZGS) Geotechnical Symposium, 4th-6th Sep. Auckland, New Zealand.

30. Mahoney, D.P. & Bowman, E.T. (2007) “The effects of bed soil parameter variation on granular debris flow behaviour: an experimental investigation”, 10th ANZ Conference on Geomechanics: Common Ground, 21st-24th October, 2007, Brisbane, Australia.

31. Bowman, E.T. Imre, B., Laue, J. & Springman, S.M. (2007) “Geotechnical centrifuge modelling of debris flows” 4th International Conference on Debris Flows Hazards Mitigation: Mechanics, Prediction and Assessment, 10-13 September 2007, Chengdu, China.

32. Bowman, E.T. (2006) “A note on the micromechanics of long runout rock avalanches” International Symposium on Geomechanics and Geotechnics of Particulate Media, 409-414, Hyodo, M. et al. (eds.), 12th-14th September 2006, Ube, Yamaguchi, Japan.

33. Bowman, E.T., Laue, J., Imre, B., Zweidler, A. & Springman, S.M. (2006) “Debris flows in a geotechnical centrifuge” International Conference in Physical Modelling in Geotechnics 2006, 311-316, Ng, C.W.W. et al. (eds.), 4th-6th August 2006, Hong Kong.

34. Rombi, J., Pooley, E.J. & Bowman, E.T. (2006) “Factors influencing granular debris flow behaviour: an experimental investigation” 6th International Conference in Physical Modelling in Geotechnics 2006, 379-384, Ng, C.W.W. et al. (eds), 4th-6th August 2006, Hong Kong.

35. Bowman, E.T. (2006) “A review of the physical modelling of mass movements” New Zealand Workshop on Geotechnical Earthquake Engineering, 241-251, Cubrinovski, M. and Pender, M. (eds.), 21st-22nd Nov, 2006, Christchurch, NZ.

36. *Bowman, E.T. & Soga, K. (2005) “Mechanisms of set up of displacement piles in sand: laboratory creep tests” Canadian Geotechnical Journal, 42, 1391-1407.

37. Bowman, E.T. & Soga, K. (2005) “The influence of particle shape on the stress-strain response of fine silica sand” Powders & Grains 2005, 1325-1328, Garcia-Rojo, R. et al. (eds.), Stuttgart, Germany.

38. Hori, T., Bowman, E.T., Mohri, Y., & Soga, K. (2004) “Model Test for Progressive Failure of a Sandy Embankment Dam by Seepage” Proc. IX International Symposium on Landslides, 939-945, Lacerda, W.A., et al. (eds.), 28th June – 2nd July 2004, Rio de Janeiro.

39. *Bowman, E.T. & Soga, K. (2003) “Creep, ageing and microstructural change in dense granular materials” Soils & Foundations 43 (4), 107-117.

40. Bowman, E.T. (2002) “The creep and ageing of dense granular materials” PhD Thesis, University of Cambridge

41. *Bowman E.T., Soga K. & Drummond T.W. (2001) “Particle shape characterisation using Fourier descriptor analysis” Géotechnique 51 (6), 545-554

42. Cheng Y.P., White D.J., Bowman E.T., Bolton M.D. & Soga K. (2001) “The observation of soil microstructure under load” Powders & Grains 2001, 69-72, Kishino Y. (ed), Sendai, Japan

43. Bowman E.T. & Soga K. (2001) "Time effects in sands" Constitutive and Centrifuge Modelling: Two Extremes, 259-265, Springman S.M. (ed), Ascona, Switzerland