Enco September HOTdeals

Chemical Etching Pen

Sale PriceModel # KN308-0495

$1049See Page 59

HSS Hand Taps3 Pc. Set

As Low As

$708See Page 37

Rite-Hite® Hold-Down Clamps

As Low As

$2395See Page 6

EXL Deburring Wheels

Starting At

$3559See Page 52

IP54 Electronic Micrometers & SetsStarting At

$8995See Page 44

13" x 40" & 14" x 40" Geared Head Engine Lathes

Starting At

$5,699See Page 17 SEE PAGE 2 FOR DETAILS

FREEPLUS

Visit Enco at IMTS 2014Stop by for a chance to win a $1000 Enco Shopping Spree

September 8-13McCormick Place | Chicago

Booth #E-5721

01-72 CP1 14-09_CustProspCover.indd 201-72 CP1 14-09_CustProspCover.indd 2 8/14/14 8:44 AM8/14/14 8:44 AM

http://www.use-enco.com/CGI/INSRIT?PMAKA=KN308-0495&PMCTLG=01

http://www.use-enco.com/CGI/INPDF?PMPAGE=59&PMCTLG=01








PHONE: 800-USE-ENCO (800-873-3626)

IT’S IN STOCK AND READY TO SHIP!• 99% In-Stock Inventory!• All in-stock orders ship within one business day. Ask your

sales associate for detailsSHIPPING DETAILSOur primary shipping method for orders weighing less than 125 lbs. is UPS Ground. Some items weighing less than 125 lbs. must be shipped truck due to size or fragility. DOT regulated items cannot be shipped via air. Alaska, Hawaii and Puerto Rico customers - Air shipments only. “Free Shipping” applies to select items that are identifi ed in a current Enco catalog. “Free Shipping” means standard ground (small parcel or truck) shipment to a location within the continental U.S. only. Lift gate and other non-standard services will incur an additional charge; call for details.

Enco does not accept C.O.D. payment for any order. Residential deliveries will incur a $1.15 surcharge. Rural deliveries will incur a $1.75 surcharge.

RETURNS You may return an item for credit within 30 days of shipment, provided it is unused and in resalable condition, found to be defective, or not specifi cally restricted from returns.Call Enco at 800-USE-ENCO to obtain a Return Authorization (RA) number. No returns will be accepted without an RA number. Machinery will be repaired or replaced at Enco’s discretion and according to our Machinery Warranty; ask for details before purchasing. All prices are subject to change without notice. Pricing, photographic and typographical errors are subject to corrections. For complete Terms of Sale, see the current Enco Master Catalog, visit use-enco.com, or call 800-USE-ENCO.

OUR TERMS OF SALE

WE WILL BEAT ANY ADVERTISED PRICE!

If you fi nd a lower advertised price on any item we sell, just send us a copy of the ad and Enco will meet

it and beat it by 5%!*

*Some limitations apply.Please call for details.

QUICK INDEX Abrasives ............................50-53

Cutting Tools .......................26-39

Fluids ................................56-57

Hand & Power Tools ...............68-71

Machine Tool Accessories ........ 4-14

Machinery...........................15-25

Material Handling & Storage ....64-67

Measuring Tools ...................40-49

Raw Materials ......................54-55

Shop Supplies ......................58-63

FOR FREE UPS SHIPPING ON YOUR ORDER OF $49.00 OR MORE!By Phone: Give the promo code to your friendly Enco Sales Associate. Online: Enter the promo code on the shopping cart page and click apply.

HURRY! Expires September 30, 2014* Valid only on orders shipped within the contiguous 48 United States. Offer only applies to Standard UPS Ground Shipping Service. 125 lb. weight limit. Cannot be combined with any other offer.

FREE UPS GROUNDSHIPPING

USE PROMO CODE: FREESEP

ATV All Terrain ViseSecure it to your hitch or mount it on your workbench, the ATV is locked, loaded and ready for action.• Fits standard 2" hitches and includes

a hitch pin for added security• Lightweight with an integrated locking carrying handle• Set screws provide a tight fi t in the hitch and

reduce vibration while driving • Water resistant • Large striking anvil • Replaceable jaws with V-grooves for

vertical clamping of round objects • Ideal working height doesn’t interfere

with truck bed or tailgateAdditional BracketModel # KN414-0021 Low Price $23.95

Attaches To Truck!

Great Outdoors!


$195Regular Price: $275.00

• Bold, permanent marks are wear-, weather-, and fade-resistant

• Excellent on most types of metals, coatings, plastics, glass, ceramics and other nonporous surfaces

• Xylene-free formula• Fast-drying paint does not spread on oily surfaces• Low chloride/halogen colors are safe on stainless

steel and other alloy metals• Durable metal barrel and nib • Easy-to-fl ip cap stores easily in pocket• -50°F. to 150° F. (-46° C. to 66° C.) marking temperature range

Pro-Line HP® Paint Markers

Color Model # White KN411-0852 Yellow KN411-0853 Red KN411-0854 Black KN411-0855 Orange KN411-0856 Blue KN411-0857 Green KN411-0858 Silver KN411-0859 Light Blue KN411-0860 Light Green KN411-0861 Gold KN411-0862 Pink KN411-0863 Purple KN411-0864 Brown KN411-0865

ss,

SAVE19%

Sale Price

$349Regular Price: $4.34 Each

Each

Heavy-Duty Round Padded Stools

• 7⁄8" OD, 18-gauge steel tubing• 5⁄8" OD foot rings are welded by 4

contact points at each leg• 300 lbs. wt. capacity • 14" dia. seat • 1⁄2" thick vinyl padding riveted

through the seat pan• Color: Gray

Starting At

$37 Low Height Model # Price 18" KN411-0875 $37.00 24 KN411-0876 40.00 30 KN411-0877 45.00

02-03 CP 14-09 Cust_Prosp.indd 202-03 CP 14-09 Cust_Prosp.indd 2 8/14/14 8:46 AM8/14/14 8:46 AM






























http://WWW.USE-ENCO.COM

TOP PRODUCT PICKS

3INTERNET: use-enco.com FAX: 800-965-5857

True Blue™ Magnetic Torpedo Levels

• Accurate to within 0.00050" per inch in all ID level and plumb working positions

• Heavy-duty aluminum frame• Strong-holding

magnetic edge• V-grooved

working edge

Starting At

$895

Reg. Sale L Vials Mfr’s # Model # Price Price 9" 3 EM81.9 KN892-0116 $11.36 $8.95 10 3 EM81.10 KN892-0117 24.94 15.95 12 4 EM81.12 KN892-0118* 13.20 10.95*Includes VARI-PITCH™ vial which reads slope in 1⁄8" increments

Includes:4 slotted: 1.5, 2, 2.5 & 3mm; 3 Phillips: #00, #0, #1.Mfr’s No. 26190

7 Pc. Precision Screwdriver SetSlotted & Phillips

Low PriceModel # KN411-2223

$2495m;

BONUSPliers

Included!Made in Germany

Fold-Up Hex Key Sets

• Custom steel is up to 20% stronger than competitors

• Comfortable handle• Exclusive PTFE fi nish offers

superior corrosion protection

Reg. Sale Set Sizes Model # Price Price 9 Pc. Inch 5⁄64-1⁄4" KN411-2025 $6.52 $5.99 7 Pc. Metric 2-8mm KN411-2026 7.14 6.95 16 Pc. Inch/Metric 5⁄64-1⁄4", 2-8mm KN411-2027 10.26 9.95 24 Pc. Inch/Metric/Torx 5⁄64-1⁄4", 2-8mm, T9-T40 KN411-2028 20.06 18.95

9 Pc. Inch

MFR'S LIFETIMEWARRANTY

As Low As

$599

Quick-ReleaseWelding Clamps

SAVEUP TO

30%

For quick clamping, without spinning. Ideal for a wide range of welding and woodworking applications, including inside clamping, clamping of unparallel parts or holding round or odd-shaped parts.Import• Material: Steel • Straight handle• Non-marring pads and cushion handle grip• Press button, slide clamp to desired position,

release button and turn handle to right to tighten clamp jaws

• Load capacity: 200 lbs.Gibraltar• Material: Black oxide fi nish with copper-

plated spindle• Resists welding splatter • T handle• Lift release lever and pull handle to open jaws• Push handle to desired position and fl ip

release lever down to tighten clamp jaws• Load capacity: 1,000 lbs.

Open Closed Max. Throat Throat Reg. Sale Cap. OAL Depth Depth Model # Price PriceImport 5" 12" 21⁄2" 31⁄2" KN308-0336 $19.20 $15.95 61⁄2 131⁄2 21⁄2 4 KN308-0337 22.79 19.95Gibraltar 5 10 21⁄4 3 KN327-0066 20.71 15.95 61⁄2 111⁄2 21⁄4 31⁄2 KN327-0067 24.88 21.49

T handleStraight handle

Clean-Up Magnets

• Cleans up iron & steel chips from nonferrous surfaces • Use for safe handling of sharp off-cuts

or diffi cult-access areas • Adjustable dump guard • Never needs to be remagnetized• Lightweight, non-rusting aluminum

shaft and magnet housing • 1" dia.

Reg. Sale OAL Model # Price Price 15" KN893-2159 $83.63 $49.95 36 KN893-2160 97.03 75.95

SAVEUP TO

40%• Inch/metric/fraction• Spring loaded and

hold measurement button for ease of use

• Super-large display• .0005"/.01mm resolution,

fractions in 1⁄64" increments• Features: On/off, zero buttons• Supplied in vinyl holsterMfr’s No. 54-225-500

1" X-TREAD® Depth GageFor Tire Tread Wear Measurement


$1495Mfr’s List: $22.35

• Blend of nontoxic, biodegradable detergents• Nonfl ammable • Highly concentrated• Approved by the USDA

Industrial Strength Cleaner & DegreaserEnvironmentally Safe with Maximum Cleaning Power

Reg. Sale Description Model # Price Price 32 oz. Spray Bottle KN891-2547 $8.58 $5.99 1 gal. Bottle KN891-2548 15.92 10.99 5 gal. Pail KN891-2549 83.06 49.95

As Low As

$599

02-03 CP 14-09 Cust_Prosp.indd 302-03 CP 14-09 Cust_Prosp.indd 3 8/14/14 8:46 AM8/14/14 8:46 AM



















http://WWW.USE-ENCO.COM

The RIGHT TOOL at the RIGHT PRICE The RIGHT TOOL at the RIGHT PRICE4

Easy, Secure ShoppingVises & Clamps

Super Precision Sine Vise• Made from fi ne-quality

alloy steel, heat treated to 58-62 HRC

• Parallelism and squareness: .0004"

• 4" jaw opening • 11⁄4" jaw depth• Overall: 3W x

35⁄8H x 71⁄2"L • Wt.: 17.8 lbs.



• Made from FC25, fi ne-grain, cast-iron, trapezoidal-thread lead screw• Replaceable, smooth jaw plates constructed

of hardened and ground tool steel• Bend and base are parallel to 0.002" • Jaw surface is square to 0.0015"• Less than 0.001" jaw defl ection at 4000 lbs. clamping pressure• 7.5" jaw opening • 1.75" jaw depth • 4.625" height • 18.5" OAL • Wt.: 78 lbs.

6" Lock-Down Machine ViseAssures the Movable Jaw Won’t Lift



SAVEUP TO

32%

Milling Machine Vises• 6" vise: bed height matched to size 2.875" ±.0005"• 8" vise: bed height matched to size 3.310" ±.0005"• Rigid main screw design allows for higher

torque loads and clamping force• Repeatability within .001"• Hardened vise bed and jaw plate• Limited lifetime warranty

Vise Jaw Jaw Jaw Max. Clamp. Wt. Mfr’s Sale Size Width Ht. Opening W Ht. OAL Force Lbs. Model # List Price 6" 6" 1.75" 9" 83⁄4" 4.62" 17.2" 8200 lbs. 75 KN308-0101 $485.00 $395.00 8 8 2.20 11 111⁄2 5.51 21.81 12,000 210 KN328-0172 1,465.00 989.95

Starting At

$395

Swivel Base VisesBench Vise• 51⁄4" jaw opening• 5" jaw width• 183⁄4" OAL• 85⁄8" height• 3⁄8" minimum pipe capacityMfr’s # 69999Multi-Purpose Mechanic’s Vises• Heavy duty – 30,000 psi rated• Hardened steel top and pipe jaws• Large anvil work surface• Swivel bar rotates 360° and has double

lockdown for maximum stability• Powder coat paint resists scratches

Jaw Jaw Throat Capacity Wt. Mfr’s Sale Open. W Depth Min – Max. Lbs. Mfr’s # Model # List Price 41⁄2" 4" 37⁄16" 1⁄4 – 2" 38 744 KN319-3258 $220.00 $105.95 51⁄4 5 33⁄4 1⁄4 – 21⁄2 52 745 KN319-3256 320.00 189.00 53⁄4 6 41⁄8 1⁄4 – 31⁄2 64 746 KN319-3259 400.00 245.95 6 51⁄2 33⁄4 1⁄8 – 3 50 14500 KN240-2993 230.00 169.00 81⁄4 8 43⁄4 1⁄4 – 31⁄2 89 748A KN319-3257 600.00 369.00

Industrial Vises

Jaw Jaw Capacity Wt. Mfr’s Sale Open. W Min – Max. Lbs. Mfr’s # Model # List PriceUtility 4" 41⁄2" 1⁄8 – 2" 16 674 KN240-2982 $140.00 $68.95 5 51⁄2 1⁄8 – 21⁄2 35 675 KN426-1020 180.00 85.95 51⁄2 61⁄2 1⁄8 – 21⁄2 44 676 KN426-1022 240.00 85.95 6 6 1⁄8 – 3 66 656HD KN426-1024 320.00 165.95 71⁄2 8 1⁄8 – 3 80 648HD KN426-1026 450.00 215.00Tradesman 4 41⁄2 1⁄4 – 21⁄2 42 63199 KN426-1010 580.00 349.00 5 51⁄2 3⁄8 – 3 53 1755 KN426-1012 680.00 429.00 61⁄2 61⁄2 3⁄8 – 31⁄2 72 1765 KN426-1014 760.00 459.00 7 8 1⁄8 – 31⁄2 109 1780A KN240-2981 1,160.00 689.00

Utility

Tradesman


$149Mfr’s List: $230.00

Starting At

$10595

Starting At

$6895Tradesman Vises• 60,000 psi ductile iron body parts• Hardened steel top and pipe jaws• Round, lathe-turned slide bar• Precision thrust bearing

Utility Workshop Vises• Serrated steel replaceable top jaws• Built-in pipe jaws• Large anvil• Finished in red enamel

ty

SAVEUP TO

64%

Double Direction Precision Machine Vise



SAVE35%

• Designed for medium- to high-volume CNC production

• Anti-tilt mechanism eliminates lift of movable jaw

• Vise body is precision ground and the height matched within +0

• Ductile cast-iron body, hardened upper guide surface improves rigidity and wear resistance

• 6" jaw width • 4" jaw opening• 5" OAH • 24" OAL • 11⁄2" jaw height• Wt.: 110 lbs.

Precision Milling Machine Vises• Removable hinged handle

for fast locking• No need to hammer

workpiece• Provides better

clamping pressure

Jaw Jaw Wt. Low Width Opening Lbs. Model # Price 4" 41⁄8" 32 KN425-7240 $100.00 5 415⁄16 51 KN425-7250 112.00 6 61⁄4 79 KN425-7260* 128.00 6 71⁄2 110 KN425-7265* 209.00 8 81⁄4 135 KN425-7280* 181.00 With Swivel Base 4 41⁄8 47 KN425-7241 136.00 5 415⁄16 71 KN425-7251 152.00 8 81⁄4 168 KN425-7281* 216.00*Truck shipment

04-05 HD 14-09 V&C.indd 404-05 HD 14-09 V&C.indd 4 8/14/14 8:49 AM8/14/14 8:49 AM





























PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 5

Online at use-enco.com Vises & Clamps

SAVE27%

6" Precision Milling Machine Vise with Swivel Base

Includes:• 24 studs: 4 each of 3, 4, 5, 6, 7 & 8" length • 4 coupling nuts • 6 fl ange nuts • 6 T-slot nuts • 6 serrated end clamps • 6 step block pairs (1" width) • Wall holder • T-slot size: 5⁄8" • Stud thread size: 1⁄2"-13• T-slot nut width: 1" • For Bridgeport®-type milling machines

52 Pc. Combination Steel Step Block & Clamp Set

• Removable hinged handle for fast locking• No need to hammer workpiece• Provides better clamping pressure• 61⁄4" jaw opening • Wt.: 95 lbs.

59 Pc. R8 Tooling Package

6 Pc. R8 Collet Set Sale PriceModel # KN209-9020


• Sizes: 1⁄8-3⁄4"

AngLock® Vises

Lock-Down Design

Assures the Movable Jaw

Won’t Lift!

FREEPLUS

D-688

Mfr’s # D-688• Up to 7,968 lbs. clamping force• Vise nut does not extend beyond the end of the vise body• Hardened vise bed and jaw plates, and a semi-hard steel screw • 80,000 psi ductile-iron bodyMfr’s # D-810• Up to 11,596 lbs. clamping force• Stationary jaw has a top-down, four-bolt

design that reduces vibration by 25%. Total disassembly of the vise allowed, without having to remove the body from the machine table

D-810 Jaw Jaw Wt. Reg. Sale W Opening OAL Lbs. Mfr’s # Model # Price Price 6" 8.8" 18.74" 78 D-688 KN990-1019 $567.94 $559.00 8 10 24.185 158 D-810 KN425-7682 1,541.84 1,439.00

Lifetime warranty against manufacturer’s defects

To see our full line of Vises see pages 414-431 in the 2014 Master Catalog

Nominal Clamping Nominal Throat Rail Reg. Sale Press. Capacity Depth L Model # Price PriceRegular Duty 1330 lbs. 0-6" 43⁄4" 6" KN505-4521 $34.48 $27.95 2660 0-8 43⁄4 8 KN505-4522 62.30 52.95 2660 0-12 51⁄2 12 KN505-4524 84.21 63.95 2660 0-20 43⁄4 20 KN505-4525 102.94 81.95Heavy Duty 4880 0-12 7 12 KN505-4526 162.36 125.95

• Movable sliding arm design saves 90% of clamping time vs. “C” clamps

• Rail, fi xed jaws and pressure plate heat-formed in one piece from cold-drawn profi led steel

• Heat-treated, high-carbonacme screw is spatter resistant;no need for copper-coated screws

• Ergonomic Tommy bar forcomfort and safety

• 2660 Clamps have heavy-duty pads

F-Style Clamps

SAVEUP TO

24%

Regular Duty

For holding or clamping small work when drilling, welding, assembling, etc.• Hardened steel designed for

utmost performance • Spring screw clip

Parallel ClampsToolmaker’s Pattern

Jaw Reg. Sale Cap. L Model # Price Price 11⁄4" 2" KN412-1610 $4.73 $3.95 13⁄4 21⁄2 KN412-1615 5.31 4.49 21⁄4 3 KN412-1620 7.27 5.95 23⁄4 4 KN412-1625 9.85 8.49 31⁄2 5 KN412-1630 16.77 13.95 41⁄2 6 KN412-1640 22.83 19.95 6 8 KN412-1650 37.53 32.95

Starting At

$395

SAVEUP TO

18%

• Excellent workholding tools, clamps adapt to a wide variety of applications

• Forged of high-carbon steel• Hardened rivets• Contoured handles with

orange cushioned grips• Spindles included

Plier Clamps SAVEUP TO

18%

As Low As

$1095 Throat Holding Reg. Sale OAH OAL Depth Cap. Model # Price Price .97" 4.75" .81" 400 lbs. KN505-4618 $12.91 $10.95 1.22 8.38 2.25 1200 KN505-4619 24.39 19.95

Deep Throat Forged C-ClampsWith Perma Pads®

• Drop-forged steel frame with extra-deep throat for maximum clearance

• Acme roll-threaded screws for maximum strength

Nom. Throat Clamp. Screw Mfr’s Sale Cap. D Press. Dia. Model # List Price 0-21⁄8" 21⁄4" 3500 lbs. 9⁄16" KN337-1042 $19.00 $12.95 0-3 21⁄2 3500 9⁄16 KN337-1043 25.00 14.95 0-41⁄2 31⁄4 6200 3⁄4 KN240-0770 37.00 19.95 0-61⁄16 41⁄8 6600 3⁄4 KN240-0771 58.00 29.95 0-81⁄2 5 6900 3⁄4 KN240-0772 72.00 39.95 2-101⁄8 6 8000 3⁄4 KN337-1044 98.00 54.95 2-121⁄4 65⁄16 9300 7⁄8 KN337-1045 156.00 79.95

Starting At

$1295

SAVEUP TO

48%

04-05 HD 14-09 V&C.indd 504-05 HD 14-09 V&C.indd 5 8/14/14 8:49 AM8/14/14 8:49 AM

























http://use-enco.com

http://use-enco.com


It’s IN STOCK and Vises & Clamps

The strength of the castings, combined with the precision round slide bar, gives this vise maximum clamping power. Straight line design eliminates wear on the spindle threads, and enclosed design keeps dirt and contaminants out.• 60,000 psi stress parts • Alloy steel slide bar• Hardened steel jaw

inserts, replaceable• Hardened milled

steel pipe jaws, replaceable

Combination Pipe & Bench Vises

* Truck Shipment

Jaw Max. Jaw Throat Pipe Cap. Wt. Mfr’s Sale W Open. Depth Min. Max. Lbs. Mfr’s # Model # List Price 31⁄2" 5" 41⁄2" 1⁄8" 21⁄2" 52 C-0 KN404-2719 $880.00 $539.95 41⁄2 6 43⁄4 1⁄8 31⁄2 77 C-1 KN404-2720 1,220.00 709.95 5 7 55⁄16 1⁄8 41⁄2 115 C-2 KN404-2721* 1,680.00 999.95 6 9 65⁄8 1⁄4 6 206 C-3 KN404-2722* 2,400.00 1,469.95

• Designed to eliminate distortion and prevent twisting

• High-tensile steel • Built-in “V” blocks • Floating jaws stay parallel • Copper-plated handle, jaws,

and screw ideal for welding use 6 Pc. Set includes: 2 pieces each of the 21⁄2, 41⁄2 and 6" deep throat sizes.

6 Pc. T-Handle Clamp Set



4-in-1 Clamping SystemIncludes Clamp, V-Pad & Extender Block

Clamp Clamping Reg. Sale Size Pressure Model # Price Price 61⁄2" 1000 lbs. KN893-2203 $25.52 $19.99 81⁄2 1200 KN893-2151 30.67 21.99 121⁄2 1200 KN893-2152 36.76 28.99 101⁄2 2400 KN893-2153 49.18 37.99 121⁄2 2400 KN893-2154 73.05 57.99

1. Standard—The sliding arm clamp is 10x faster than a C-clamp!

2. Pipe—Add the exclusive V-Pad to create a pipe clamp!

3. Spreader—Slide the clamp arm OFF and reverse to create a spreader clamp.

4. Step-Over—Add the extender block to create a step-over clamp.

• Push lever to slide clamping arm on and off• Nickel/chrome-plated, heat-treated alloy steel

SAVEUP TO

28%

Starting At

$1999

SAVEUP TO

38%

Max. Nominal Load Stud Clamping Limit Reg. Sale Size Range Length Lbs. Model # Price Price Long for Longer Setups 3⁄8" 0-11⁄4" 31⁄2" 10,000 KN505-4639 $32.38 $23.95 1⁄2 0-21⁄2 53⁄4 12,800 KN505-4641 35.29 25.95 5⁄8 0-31⁄2 63⁄4 18,000 KN505-4643 42.82 28.95 3⁄4 0-5 9 24,000 KN505-4645 62.75 42.95 1 0-5 111⁄8 65,000 KN505-4646 103.11 62.95 Short for Closer Setups 3⁄8 0-1 3 14,000 KN505-4638 31.57 23.95 1⁄2 0-13⁄4 41⁄2 16,800 KN505-4640 34.32 25.95 5⁄8 0-23⁄4 51⁄2 24,000 KN505-4642 41.83 28.95 3⁄4 0-31⁄2 7 35,000 KN505-4644 61.75 42.95

Rite-Hite® Hold-Down Clamps• Instant adjustment up to 5" • Self-positioning • For milling, drilling, stamping, etc. • Use on any machine with a “T”-slot

As Low As

$2395

52 Pc. Combination Steel Step Block & Clamp Sets

Includes:• 24 Studs: 4 pcs. each: 3, 4, 5, 6, 7 & 8" long• 4 coupling nuts • 6 fl ange nuts • 6 T-slot nuts• 6 serrated end clamps • 6 Step blocks• 1 wall holder • Step blocks 1" wide

Stud Thread 1-Slot T-Slot Wt. Reg. Sale Size Size Nut W Lbs. Model # Price Price 3⁄8"-16 7⁄16" 11⁄16" 18 KN400-2438 $112.64 $65.95 3⁄8-16 1⁄2 7⁄8 23 KN400-2501 102.49 59.95 3⁄8-16 9⁄16 7⁄8 23 KN240-7207 115.69 65.95 1⁄2-13 9⁄16 7⁄8 23 KN400-2562 88.28 55.95 1⁄2-13 5⁄8 1 23 KN505-6544* 84.22 44.95 1⁄2-13 11⁄16 11⁄8 27 KN891-5756 97.42 55.95 5⁄8-11 11⁄16 11⁄8 29 KN400-2688 146.14 85.95 5⁄8-11 3⁄4 11⁄4 29 KN400-2751 147.15 79.95*For Bridgeport -type milling machines

Clam

SAVEUP TO

45%

SAVE25%

Parallel Separator

• Spring-loaded parallel separator holds parallels securely in place

• Can be used on vises up to 6" jaw width



SAVEUP TO

40%

Cam Action Drill Press Vises• Applies variable clamping force depending on

the position of the cam locking lever• Quick jaw positioning using slide bar handle• Machined step jaws • Four mounting locations

Jaw Jaw Throat Wt. Mfr’s Sale W Opening D OAL Lbs. Model # List Price 3" 3" 11⁄4" 9" 10 KN240-2899 $200.00 $119.95 4 411⁄16 15⁄16 10 18 KN240-2900 220.00 145.95 6 63⁄16 113⁄16 12 34 KN240-2901 380.00 245.95 8 83⁄16 2 14 51 KN319-3058 480.00 309.95

06-07 HD 14-09 V&C_MTA.indd 606-07 HD 14-09 V&C_MTA.indd 6 8/14/14 8:56 AM8/14/14 8:56 AM

































PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com

Machine Tool Accessories

7

READY TO SHIP!

• 60° included angle • For use in a drill chuck or collet • Hardened point is inserted into the center

of the tapping handle or tap center• The stroke of the center will follow the tap as it threads

the hole, assuring straight and accurate hand-tapped threads

• One size can be used for all standard tapping applications • 1⁄2" shank • 3⁄8" spring travel distance

Spring Center



Precision Live Centers

• Dust-, chip- and oil-proof mechanism with labyrinth packing and special oil seal• Seal has a running-in period of approximately 250 hours, during which time

heating may be noticed — this is not detrimental to the center and will not occur when the seal has been run-in

• Center is fi tted with pre-loaded taper roller bearings

Starting At

$5567

Morse Point Load Max. Low Taper OD Dia. OAL Cap. rpm Model # Price 1 1.339" 0.669" 4.528" 200 lbs. 6700 KN328-0158 $55.67 2 1.457 0.866 4.921 600 6400 KN328-0159 80.02 3 1.850 1.181 6.417 900 5000 KN328-0160 100.52 4 2.165 1.378 7.598 1800 4100 KN328-0161 124.21 5 2.756 1.772 9.449 3000 3400 KN328-0162 176.95 6 3.544 2.362 12.598 7500 2700 KN328-0163 282.26

CNC Triple Bearing Live Centers• Hardened and ground to 61-65 Rockwell • Concentricity within .0002"

Morse Low Taper Model # Price 2 KN328-0164 $100.70 3 KN328-0165 109.63 4 KN328-0166 146.72 5 KN328-0167 186.48

CNC

NEWLOW

PRICES

• Holds pipe securely• Holds round parts securely• Holds pipe/tube for

butt welding• 11⁄2-21⁄2" min./max.

pipe diameter • 11" overall length

Locking Pipe Clamp



SAVE28%

Collet Shank Reg. Sale Series Dia. OAL Model # Price Price ER-11 1⁄2" 3.50" KN308-0018 $84.22 $59.95 ER-11 5⁄8 3.50 KN308-0019 95.39 69.95 ER-16 5⁄8 3.65 KN308-0020 110.61 79.95 ER-16 3⁄4 3.65 KN308-0021 104.52 75.95 ER-20 1 3.75 KN308-0024 117.72 85.95 ER-25 1 6.10 KN308-0025 161.36 119.95 ER-25 11⁄4 6.10 KN308-0026 143.09 105.95 ER-32 1 6.20 KN308-0027 174.56 129.95 ER-32 11⁄4 6.20 KN308-0028 155.27 115.95 ER-32 11⁄2 6.20 KN308-0029 149.18 109.95

ER Straight Shank Stubby Collet Chucks

• Ideal for hard-to-machine surfaces

• High-grade alloy steel• Inside backup screw

with left-hand thread and locknut included

As Low As

$5995

4-Way Master Chuck Keys• Master Key will fi t all popular drill chucks • Properly marked eliminating the need for

different types of keys

7BA3⁄8 SM4G61-T2 26BA1⁄2 SM8K64-T1 31BA1⁄2 KN4G61-T1 81⁄2N DC4G61-T1 20BA3⁄8 DC8K61-T1 31-01 SM8K33-T1 22BA3⁄8 SM8K61 31-02 DC4G61-T2 22KG3⁄8 SM4G61-T1 225BA 74K 24BA3⁄8 SM1G61 29A33 31BA3⁄8

Small 4-Way Key For Jacobs Chuck Nos.Large 4-Way Key For Jacobs Chuck Nos. 3A 3B5⁄8 36 33BA1⁄23 3KD 32BA1⁄2 36KD 33BA5⁄8 3PD 35B1⁄2 36PD 11N 34-02 36B5⁄8 2A 14N 34-06 36B3⁄4 33 16N 34-33 2BA3⁄8 3326A 18N 34-33C 33BA3⁄8 33KD 3326E

Reg. Sale Description Model # Price Price Small KN712-0488 $22.28 $14.95 Large KN505-6706 23.29 15.95

As Low As

$1495

Chuck Wt. Reg. Sale Dia. Spindle Lbs. Model # Price Price Threaded Spindle (Not direct mount. Requires chuck adapter.) 6" 11⁄2" – 8 33 KN271-6382 $198.41 $185.00 Direct Mounting “D” Series (Includes setting screws and hexagon wrench) 8 D1-4 35 KN271-6117 245.04 219.00 10 D1-4 56 KN271-6127 352.70 295.00 10 D1-6 50 KN271-6137 341.90 304.00

4-Jaw Independent Lathe Chucks

• Semi-steel• Reversible carbon steel jaws• Jaws are hardened and precision ground

Starting At

$185

06-07 HD 14-09 V&C_MTA.indd 706-07 HD 14-09 V&C_MTA.indd 7 8/14/14 8:57 AM8/14/14 8:57 AM





























http://use-enco.com

The RIGHT TOOL at the RIGHT PRICE The RIGHT TOOL at the RIGHT PRICE


8

Over 90,000 PRODUCTS Available

Can be mounted on any fl at machine surface or tool crib for collet storage.• Holder rotates with fi nger touch for easy

selection of sizes• Collets are seated fi rmly in angular

pockets without loosening when holder is rotated

• Molded of long-lasting A.B.S. plastic

• Contains 11 R8 collets: 1⁄8 to 3⁄4" by 16ths

SAVE30%

R8 Collet Set with Rotating Holder



SAVEUP TO

37%

Tilting Tables

Set work at any angle.• Machined T-slots • Two screws to lock setting • Heavy solid casting • Graduated in degrees• Sliding adjustment ±45° range

Wt. Reg. Sale W L OAH Lbs. Model # Price Price 5" 7" 33⁄4" 20 KN418-4200 $127.99 $79.95 7 10 5 44 KN418-4202 197.26 129.95 10 15 61⁄2 92 KN418-4204 234.47 209.95

As Low As

$7995

Specifi cations Dial per rev.: .100" Travel: 8" longitudinal T-slots: 5⁄8" 5" cross Transverse: 5" Ht.: 41⁄2" Base: 8 x 9" oval w/U-slots Table: 51⁄2 x 12" for up to 5⁄8" bolts Wt.: 36 lbs.

Compound Slide Milling & Drilling Table

• Heavy-duty rugged slide for positioning, milling, drilling, microscope viewing and staging

• Adjustable gibs for heavy loads



SAVEOVER

40%

SAVE10%On Chucks

3-Jaw Plain Back Lathe Chucks

• Semi-steel body • Self-centering .003" TIR• Requires backplate

(sold separately)6" Chuck Dia. Backplate

As Low As

$8195

Backplates (Some Machining Required)

2-Piece Jaw

1-Piece Jaw

Chuck Thru Wt. Reg. Sale Dia. Hole Lbs. Model # Price Price Chucks with 1-Piece Jaw (2 Sets Included) 3" .630" 5 KN270-4070 $92.92 $81.95 4 .860 8 KN270-4072 97.34 85.95 5 1.180 12 KN270-4074 113.57 100.95 6 1.570 20 KN270-4076 135.83 120.95 8 2.550 37 KN270-4078 175.10 155.95 10 3.150 60 KN270-4080 213.25 189.95 Chucks with 2-Piece Jaw 6 1.570 20 KN270-4020 130.01 114.95 8 2.550 35 KN270-4025 175.31 155.95 10 3.150 55 KN270-4030 228.44 202.95 12 3.930 109 KN270-4035* 335.32 297.95 15 5.320 152 KN307-1747* 468.43 416.95 *Truck Shipment

Chuck Reg. Sale Dia. Spindle Model # Price Price 6" D1-4 KN308-0123 $68.45 $60.95 8 D1-4 KN308-0124 88.49 77.95 8 D1-6 KN308-0125 134.47 118.95 10 D1-6 KN308-0126 172.63 152.95 10 D1-8 KN308-0127 183.27 162.95 12 D1-8 KN308-0128 221.91 196.95 15 D1-11 KN328-0988 256.71 227.95

• Safe, easy way to remove chips• Removes sharp, stringy chips and cuttings from lathes, mills

and drill presses, without injury to hands and fi ngers• Constructed with a tough, hardened spring steel blade and a

durable plastic handle

The ChipmasterSale Price

Model # KN825-0005


SAVEOVER

15%• Lifting power 14 lbs. (based on 1⁄2" steel)• Trigger-release, hand-operated, 11⁄2" stroke plunger• Handles hard-to-grip metal objects• Easy-to-use, safe and practical time-saving device• High-impact ABS plastic body• Ceramic-type magnet in metal cup housing

(permanent power)

EZ Grip MagnetExtended Length



SAVE10%On Qty.: 4+

Neoprene MountsThick, non-skid, neoprene cushion provides friction and resists oil. No bolting to fl oor required.• Isolates impact and vibration• Zinc-plated hardware • Steel load transfer plate• Cutoff stud fi ts in blind base holes• 1" leveling range • Locks to machine

Load Range Base Bolt Usable Sale Price Each Per Mount Dia. Thick. Dia. Bolt L Model # 1-3 4+ 50-250 lbs. 23⁄8" 3⁄4" 3⁄8"-16 3" KN325-6627 $9.72 $8.75 250-500 3 7⁄8 1⁄2-13 4 KN325-6629 13.25 11.89 500-1000 33⁄8 1 1⁄2-13 4 KN325-6615 15.42 13.79 1000-2000 5 11⁄4 5⁄8-11 5 KN325-6626 28.15 25.00 2000-4000 63⁄4 13⁄8 5⁄8-11 6 KN325-6628 56.93 50.99

As Low As

$875EachQty.: 4+

08-09 HD 14-09 MTA.indd 808-09 HD 14-09 MTA.indd 8 8/14/14 8:59 AM8/14/14 8:59 AM

































9

Online at use-enco.com

SAVEUP TO

39%

• 4" table utilizes low-profi le locks for added workspace• 10-second vernier reading • Gear drive immersed in oil• Extra-deep coolant channel • Dual positive-action locks• Satin-chrome dials • 90:1 gear ratio • Low profi le

Accessory Table Reg. Sale Dia. Model # Price Price Tailstocks for Hor./Vert. Tables 8 & 10" KN200-1098 $218.13 $115.95

Rotary Tables

*Ships Truck

Table Ht. O/A Center Morse T-Slot Approx. Reg. Sale Dia. Horiz. Vert. Taper W Wt. Lbs. Model # Price PriceHorizontal/Vertical Rotary Tables 8" 3.94" 5.98" 3 .465" 95 KN200-1143 $455.61 $289.95 10 4.33 6.75 3 .465 137 KN200-1153* 594.12 359.95Horizontal Rotary Tables 6 3.2 — 2 .390 42 KN200-1076 311.97 209.95 8 4.1 — 3 .465 55 KN200-1078 386.37 279.95 10 4.5 — 3 .465 82 KN200-1080 436.80 299.95 12 5.3 — 4 .545 168 KN200-1082* 759.42 479.95

Specifi cations Max. Variation Flatness of Clamping Surface (Concave): .0006" Concentricity of Center Bore: .0008" Parallelism of Clamping Surface to Angle Face: .0008" Squareness of Angle Surface to Clamping Surface (Hor./Vert. only): .0004" Squareness of Clamping Surface to Center Slot: .0008" Accuracy: 4, 6 & 8" Table 1 min. 20 sec. 10, 12 & 16" Table 45 sec.

As Low As

$20995

18 Pc. 5C Round Collet Set• Hardened and ground throughout• Outside thread: 1.240 x 20 R.H.• Inside thread: 1.047 x 24 R.H.• 1⁄16-11⁄8" x 16ths

SAVEOVER

30%



• Fully adjustable gibs • Table locking screws• Micrometer dials with

friction hold allow dial to be “0” at any point

Heavy-Duty Mill & Drill Table

Specifi cationsHeight: 5"Travel: 11" long, 71⁄2" crossBase: 8 x 101⁄2" with U-slots for bolts up to 5⁄8"Table Dim.: 6 x 181⁄2"T-slots: 9⁄16"Wt.: 56 lbs.



Clamping WedgesDrop Forged C-1020/C-1030 Steel

Thick Low Length Width End Model # Price 3" 1" 1⁄4" KN319-7793 $3.41 5 1 1⁄2 KN319-7794 4.48 6 11⁄4 3⁄4 KN319-7795 5.22 8 15⁄8 11⁄8 KN319-7796 8.67

A MachineShop

Necessity

• Hammer has 3⁄4" socket for loosening the drawbar

• Socket end fi ts other 3⁄4" bolts on vertical mills

Drawbar HammerSAVE

OVER

25%



8 Pc. R8 End Mill Holder Set

• Sizes 5⁄8" and up for single end mills only• Hardened and ground • 8 pc. set includes sizes:

3⁄16, 3⁄8, 1⁄2, 5⁄8, 3⁄4, 7⁄8, 1, 11⁄4"

SAVE

OVER

10%



















http://use-enco.com

http://use-enco.com



10

The Lowest Prices in the

R8 13 Pc. Collet Set & Tool Tray

• Sturdy aluminum casting does not scratch • 2 rows with holes under 1"• Attaches to any milling machine

by 2 screws (included)• Design of tray permits dirt and

chips to fall through• Dimensions: approximately 14W x 9"D• Includes 1⁄8 to 7⁄8" by 16ths collets • Tray holds 15 collets





Quick and Easy—Just stop, lock, remove and you’re ready to machine!• For CNC or manual lathes whether manually

pulling a bar through a collet/chuck or using a bar puller (fi rst pull for each bar)

• Gage lengths up to 51⁄2" long• Can be used on all stock shapes up to 3" round• Self-centering, unobstructed viewing• Change dull drills (up to 3⁄4" dia.) in your turret• Mill both sides of your

stock without a stop in the way

• Also a ruler for visual reference

C Collet/Chuck StopLathe & Mill Vise Tool

Plastic CNC Tool RacksHolds 10 Tools

• 16L x 7W x 5"H• Portable

Taper Size Model # CAT-30 KN327-4083 CAT-40 KN327-4084

Your Choice


SAVEOVER

35%

SAVEUP TO

47%

Slotted Angle Plates

• Machined both square and parallel • High-tensile, cast-iron construction seasoned against distortion• Webbed end machined on edges and outside surfaces only• Slots are arranged for maximum clamping versatility

As Low As

$799For setting up jigs and fi xtures on milling machines, drill presses, planing machines and radial drilling machines.

Open End Reg. Sale Webbed End Reg. Sale W L H Model # Price Price Model # Price Price 3" 21⁄2" 2" — KN418-4510 $14.13 $7.99 31⁄2 3 21⁄2 — KN418-4515 17.06 8.99 41⁄2 31⁄2 3 KN418-4720 $25.37 $14.99 KN418-4520 20.46 10.99 6 5 41⁄2 KN418-4725 40.79 23.99 KN418-4525 31.24 17.99 7 51⁄2 41⁄2 KN418-4730 52.25 30.99 KN418-4530 38.06 21.99 8 6 5 — KN418-4535 50.77 29.99 10 8 6 KN418-4745 97.49 56.99 KN418-4540 70.82 40.99 12 9 8 KN418-4750 126.04 73.99 KN418-4545 89.39 52.99

Iron Angle Plates

• High-tensile iron castings• Machined plates for general machine

shop or setup work• Precision-ground plates for close

tolerance layout and inspection setup• Two ribs per plate• Plates may be gray or blue

TolerancesMachined: .001" in 6"Precision Ground: .0005" in 6"Squareness =: .001" in 6"Parallelism =: .005" in 6"

As Low As

$695

Angle Precision Plate Wt. Machined Reg. Sale Ground Reg. Sale Size Lbs. Model # Price Price Model # Price Price 2 x 2 x 2" 1 KN418-4310 $8.26 $6.95 KN418-4410 $14.60 $12.95 3 x 3 x 3 3 — KN418-4415 21.20 15.95 4 x 4 x 4 6 KN418-4320 18.02 15.95 KN418-4420 31.82 25.95 5 x 5 x 5 11 KN418-4325 33.97 29.95 KN418-4425 46.15 39.95 6 x 6 x 6 17 KN418-4330 41.00 35.95 KN418-4430 68.38 54.95 8 x 8 x 8 36 KN418-4335 89.87 79.95 KN418-4435 117.05 105.95 10 x 10 x 10 62 KN418-4340 114.80 105.95 KN418-4440 207.16 189.95 12 x 12 x 12 104 KN418-4345 189.59 179.95 KN418-4445 288.31 269.95

SAVEOVER

20%

Classic Keyless Drill ChucksHeavy-Duty Taper Mounted• “The World’s Most Accurate Keyless Drill Chuck” • Widely used today on the fi nest precision

drilling machinery where close tolerance drilling is essential

• Hardened alloy steel working parts • Use on high-accuracy drill presses, jig borers,

milling machines and production drilling equipment• Model 15J0 keyless drill chuck is especially designed for

holding small diameter twist drills and has a micrometer graduation to change the smallest drills

Jacobs Mfr’s Sale Mfr’s # Capacity Taper rpm Model # List Price 15J0 0-1⁄16" 0 50,000 KN290-1230 $277.00 $213.99 30J0 0-1⁄8 0 35,000 KN290-1235 225.00 172.95 30J1 0-1⁄8 1 35,000 KN290-1240 225.00 172.95 65J1 0-1⁄4 1 20,000 KN290-1250 244.00 189.00 100J33 0-3⁄8 33 12,000 KN290-1255 277.00 214.00 100J2 0-3⁄8 2 12,000 KN290-1260 277.00 214.00 130J33 1⁄32-1⁄2 33 7000 KN290-1265 307.00 237.95 130J2 1⁄32-1⁄2 2 7000 KN290-1270 307.00 237.95 130J6 1⁄32-1⁄2 6 7000 KN290-1275 307.00 237.95 160J6 1⁄8-5⁄8 6 4000 KN290-1280 347.00 267.95

As Low As

$17295














































11

Industry GUARANTEED!

SAVEUP TO

60%• Supplied with chuck key

Chucks

Thread Mounted

*Smooth sleeve

Medium-Duty Thread Mounted Chucks Capacity Range Mount Mfr’s Sale Mfr’s # Min./Max. Thread Key # Model # List Price 1B 3⁄8 .040/.250" 1/6.5mm 3⁄8"-24 K1 KN290-1404* $110.30 $45.00 2BA 3⁄8 .040/.375 1/10 3⁄8-24 K2 KN290-1400 146.57 59.00 41BA 3⁄8F .040/.375 1/10 3⁄8-24 K30 KN240-2825 61.65 48.00 33BA 1⁄2 .08/.500 2/13 1⁄2-20 K32 KN290-1408 151.08 61.00 33BA 3⁄8 .08/.500 2/13 3⁄8-24 K32 KN290-1406 157.62 63.00 33BA 5⁄8 .08/.500 2/13 5⁄8-16 K32 KN290-1412 157.44 63.00

• For extra heavy-duty drilling applications on production drilling machines, radials, jig borers, mills and lathes • Supplied with a chuck key

• The world’s most accurate key-type chuck for close-tolerance drilling • The ball-thrust bearing reduces friction in the closing mechanism, for greater tightening on the twist drill shank

Ball-Bearing Super Chucks

Capacity Range Tapered Mfr’s Sale Mfr’s # Min./Max. Mount Key # Model # List Price 81⁄2N .040/.250" 2JTS K30 KN505-2191 $199.19 $80.00 16N .125/.625 3/16mm 3JT K4 KN505-8005 356.17 143.00 18N .125/.750 3/19 4JT K4v KN505-8006 535.68 216.00 Super Chuck

Taper Mounted

Starting At

$45

Capacity Range Tapered Mfr’s Sale Mfr’s # Min./Max. Mount Key # Model # List Price Medium-Duty 33 .08/.500" 2/13mm 33JT K32 KN505-2189 $166.58 $67.00 Heavy-Duty 3A .125/.625 3/16 3JT K3 KN290-1320 243.66 97.00 34-02 .040/.500 1/13 2JT K3 KN290-1329 153.02 60.00 34-06 .040/.500 1/13 6JT K3 KN290-1330 203.21 81.00

Plain Bearing Taper-Mounted Drill Chucks

Low Description Model # Price Single Position KN337-9316 $14.95 Double Position KN337-9317 19.95

Quickie Vise Handles• Fits all 6" vises with 3⁄4" hex• Machined anodized aluminum

As Low As

$1495

m

NEWLOW

PRICE

SAVEUP TO

17%

3 & 4" Diameter 5C Mount 3-Jaw Self-Centering Chucks

Precision chucks eliminate having to tear down a setup on a lathe to switch to a 3- or 4-jaw chuck when working with a diameter that 5C or MT spindles aren’t readily available for.

Standard Accessories• 1 chuck key• 2 sets of hardened steel jaws; 1 set of

internal holding and 1 set of externalholding jaws for increased clamping range

Chuck T.I.R. Wt. Reg. Sale Dia. Repeatability Lbs. Model # Price Price 3" .003" 6.7 KN890-8833 $121.66 $99.95 4 .003 10.4 KN890-8834 146.54 129.95

Starting At

$9995

5C Vertical/Horizontal Collet Vise

• Uses any standard round 5C collet• A small movement of the lever opens and

closes the collet• Mounted on an angle plate, this fi xture may be

used in either a vertical or horizontal position• 11⁄8" round capacity



• 11⁄8" thick fl ange• Machinable face,

ground sleeve and taper• Designed for larger and

odd-shaped pieces• Can be heat treated after

machining or used as is• Internal thread: 1.041-24• External thread: 1.242-20• Made of 1065 steel

Face Pilot Hole Reg. Sale Dia. Dia. Model # Price Price 2" 1⁄4" KN230-4382 $30.59 $23.95 3 5⁄16 KN230-4383 32.87 25.95 4 5⁄16 KN230-4384 47.20 36.95 6 5⁄16 KN230-4386 77.68 60.95

5C Step ColletsSAVE20%

Quill StopFor Bridgeport Type Mills

• Quick action aluminum clip• Clips on quill easily for rapid depth setting• Top or bottom positioning• .020" fi ne adjustment

SAVEOVER

30%



























http://use-enco.com



12

FAST & FRIENDLY Customer

• Direct power transmission gear and scroll for accurate, vibration-free work

• Hardened and precision-ground bodies and jaws

Key-Type Drill Chucks

Mount/ Thread Key Low Capacity Size Size Model # Price 1⁄64-1⁄4" 1JT S8 KN325-1499 $33.00 1⁄32-3⁄8 3⁄8"-24 S8 KN325-1500 40.00 1⁄16-1⁄2 1⁄2"-20 S9 KN325-1535 50.00 1⁄32-3⁄8 2JT S9 KN325-1501 46.00 1⁄16-1⁄2 6JT S9 KN325-1502 50.00 1⁄16-1⁄2 3⁄8"-24 S9 KN325-1503 50.00 1⁄16-1⁄2 33JT S9 KN325-1537 50.00 1⁄16-1⁄2 2JT S9 KN325-1536 49.00 1⁄32-5⁄8 3JT S10 KN325-1505 72.00 3⁄16-3⁄4 3JT S13 KN325-1506 117.00

Made in Germany!

Starting At

$33

SAVEUP TO

25% Power Reg. Sale Feed Axis Model # Price Price Table x KN404-3045 $399.98 $299.95 Cross Saddle y KN404-3046 462.99 349.95 Knee z KN404-3047 455.98 349.95

Specifi cations Speed Range: 1-9"/min. Rapid Traverse: 40"/min. Gearing: Helical

Super Power FeedsFor Bridgeport®-Type Milling Machines• 150 lbs. torque• 110v with manual reset• Auto cutoff • Pilot light

Starting At

$29995

SAVEOVER

15% Range Reg. Sale hp Model # Price Price Medium-Duty 1⁄3-3⁄4 KN297-3510 $129.52 $105.95 3⁄4-11⁄2 KN297-3520 141.29 115.95 1-3 KN297-3530 164.84 135.95 3-5 KN297-3540 188.39 154.95 4-8 KN297-3550 223.71 183.95 Heavy-Duty 1⁄3-3⁄4 KN297-3700 164.84 135.95 3⁄4-11⁄2 KN297-3705 188.39 154.95 1-3 KN297-3715 211.94 173.95 3-5 KN297-3725 270.81 222.95 4-8 KN297-3735 317.91 261.95 8-12 KN297-3745 435.65 358.95 12-18 KN297-3755 724.19 596.95

Static Phase ConvertersRun 3-Phase Equipment From Single-Phase Power• Simple to hook up• Runs at 2⁄3 rated hp• These units are non-returnable.

Ask our technical staff for assistance before ordering

PHASE-A-MATIC™

As Low As

$10595

SAVE22%

5C Spin Indexer (Jig)• Designed to extend the work capabilities of surface grinders,

drill presses and all types of milling machines• Accepts 5C collets to 11⁄8" capacity• Indexing plate with precise 36-hole pattern• 10 vernier holes for 1° indexing• Spindle travels 21⁄16" for fl ute grinding• Hardened and ground spindle with lock• 2-year guarantee



Dividing spindle concentricity .0004" Cylindrical center bore (per 1") concentricity .0012 Spindle center line parallelism to base .0008

Tolerances

• Can also be used in automatic lathes• Overall length: 21⁄2" • Capacity: .010 to .100"• Includes pin chuck with three interchangeable collets

Pin Chuck Set



SAVE46%

Milling Machine Vise Work Stops

Versatile and quick-mounting work stop permits fast, completely accurate positioning of repetitive work.

Fits Reg. Sale Vise Model # Price Price 3 & 4" KN319-9643 $36.52 $29.95 5 & 6 KN891-5935 36.52 32.95 8 KN319-2878 57.83 56.98

As Low As

$2995Asssss

SAVEUP TO

18%

Carbon Steel Hardened Bearing Carbide Morse & Ground Reg. Sale Steel Reg. Sale Tipped Reg. Sale Taper OAL Model # Price Price Model # Price Price Model # Price Price 1 35⁄16" KN251-3061 $3.68 $3.29 KN251-3041 $13.17 $11.79 KN251-3051 $21.41 $19.95 2 43⁄16 KN251-3062 5.37 4.79 KN251-3042 14.93 13.29 KN251-3052 21.48 19.95 3 415⁄16 KN251-3063 6.27 5.59 — KN251-3053 42.35 38.09 4 65⁄16 KN251-3064 9.06 8.59 KN251-3044 31.08 27.97 KN251-3054 57.75 53.95 5 81⁄2 KN251-3065 22.07 18.95 KN251-3045* 56.47 50.79 KN251-3055* 75.73 67.95 6 101⁄2 — KN251-3046 160.47 144.29 — *77⁄8" OAL

Morse Taper Solid Dead CentersCarbon Steel, Bearing Steel or Carbide Tipped

With 60˚ Included Angle• Precision hardened and

ground to closest tolerance

As Low As

$329Import

USA Carbide Tipped

Morse Reg. Sale Taper OAL Model # Price Price 3 51⁄4" KN325-1426 $62.91 $54.95 4 63⁄4 KN325-1427 96.40 85.95

SAVEUP TO

14%



















































13

Service 800-USE-ENCO

• Five-axis adjustment moves the stop to any position your job requires

• 1⁄4" stop rod can be modifi ed, replaced or extended with a longer piece of bar stock

• Locking lever can be positioned at 360° to avoid interference

• T-nut to fi t 5⁄8" table slots

5-Axis Milling Stop


$9295

Scale Reg. Sale Travel Model # Price Price 8 x 36" KN337-9335 $1,865.23 $1,399.00 8 x 40 KN337-9336 1,968.47 1,479.00 10 x 40 KN337-9337 1,984.20 1,489.00 10 x 48 KN337-9338 2,156.27 1,609.00 12 x 60 KN337-9339 2,369.63 1,769.00 12 x 65 KN337-9340 2,520.07 1,889.00 12 x 84 KN337-9341 2,905.51 2,179.00

2-YEARWARRANTY

Digital Readout Systems (DRO)• 5.7" transmissive LCD• Sealed membrane keypad• Precision glass scales• Preset and zero reset• Absolute/Incremental• Multi-language supports • Help function• Feed rate display• Near zero warning• 4-function calculator (with trig)• 16 tool offsets• Centerline calculation• Fixed reference marks• Job clock• Mounting hardware included

Specifi cationsError compensation: ±9,999 ppm (linear and nonlinear)Construction: die cast metalOperating temperature: 32 to 113° F.Electrical: 100-240 v AC, 50/60 Hz

VUE® Milling Machine DROs• Bolthole pattern calculations with graphics• Inch/Metric• Resolution: .0002" X-Axis; .0002" Y-Axis

Scale Reg. Sale Travel Model # Price Price 2-Axis Models 8 x 20" KN319-9822 $1,288.06 $989.00 10 x 24 KN319-9823 1,314.61 999.00 13 x 32 KN319-9824 1,391.30 1,059.00 2-Axis Bridgeport 13 x 35 KN319-9827 1,391.30 1,049.00 3-Axis Quill Models 13 x 32 x 4" KN319-9828 1,851.46 1,389.00 13 x 35 x 4 KN319-9829 1,802.30 1,369.00 16 x 36 x 4 KN319-9830 1,802.30 1,369.00 3-Axis Knee Models 13 x 32 x 16 KN319-9831 1,893.74 1,449.00 13 x 35 x 16 KN319-9832 1,893.74 1,449.00 16 x 36 x 16 KN319-9833 1,893.74 1,449.00

Additional Features for ACU-RITE 200-S DROs• Linear error compensation• Sealed 3D, tactile-feel keypad• Position-Trac™ - quickly and accurately

reestablishes workpiece zero after power loss• Vectoring• Edge fi nder input

Scale Reg. Sale Travel Model # Price Price 2-Axis Models 12 x 30" KN337-9342 $1,723.64 $1,329.00 13 x 32 KN337-9343 1,723.64 1,299.00 13 x 35 KN337-9344 1,770.84 1,329.00 16 x 36 KN337-9345 1,770.84 1,329.00 3-Axis Quill Models 13 x 32 x 4 KN337-9346 2,225.10 1,589.00 13 x 35 x 4 KN337-9347 2,272.30 1,649.00 16 x 36 x 4 KN337-9348 2,272.30 1,689.00 3-Axis Knee Models 13 x 32 x 16 KN337-9349 2,324.40 1,739.00 13 x 35 x 16 KN337-9350 2,371.60 1,779.00 16 x 36 x 16 KN337-9351 2,371.60 1,779.00

VUE® Lathe 2-Axis DROs• Lock Axis• Centerline calculation• Instant radius/diameter conversion (inch/mm)• Resolution: .0002" X-Axis, .0005" Y-Axis Scale Reg. Sale Travel Model # Price Price 6 x 36" KN319-9834 $1,523.06 $1,169.00 6 x 38 KN319-9835 1,523.06 1,169.00 12 x 40 KN319-9836 1,681.36 1,249.00 12 x 60 KN319-9837 2,108.09 1,589.00 12 x 78 KN319-9838 2,523.02 1,899.00

Additional Features for 200-S 2-Axis DROs for Lathes• Full system kits include DRO console, scales

and mounting brackets• Lock Axis• Position Trac™

• Instant radius/diameter conversion (inch/mm)• Resolution: .0002" X-Axis, .0005" Y-Axis

As Low As

$989

5C Collet Rack

• Holds up to 30 collets• 18 gage steel• Blue-baked-enamel fi nish• Can be hung on wall or can

be set on workbench• 91⁄2 x 12", .048" thick.,

51⁄2" high at one end and 21⁄2" at other end

• Wt.: 3 lbs.



SAVE46%

11 Pc. R8 RoundCollet Set

• 1⁄8 - 3⁄4" x 16ths• Hardened and

ground throughout• 7⁄16"–20 drawbar

thread• Within .0005" T.I.R.

1" from face



SAVE35%





































http://use-enco.com



14

Ask the Enco Tech Team to help

SAVEUP TO

52%• Wedge-type tool posts

are precision engineered to ensure repetitive accuracy

• Interchangeable with Aloris• Oversized T-nut can be

machined to fi t any size lathe6 Pc. Sets include 1 tool post and 5 holders:• Style 1: Boring and facing on piston type,

turning and facing on wedge type• Style 2: Boring, turning and facing • Style 4: Boring, heavy-duty • Style 7: Universal parting blade• Style 10: Knurling, facing and turning

6 Pc. Quick Change Tool Post Sets

Wedge Type

Piston Type

As Low As

$18595

Lathe Piston Type Reg. Sale Wedge Type Reg. Sale Series Swing Model # Price Price Model # Price Price 100 9-12" KN505-2253 $309.50 $187.95 KN890-9636 $383.76 $185.95 200 10-15 KN505-2172 355.62 215.95 KN890-9637 452.39 215.95 300 13-18 KN505-6543 447.90 271.95 KN890-9638 594.51 295.95 400 14-20 — KN890-9639 761.37 425.95

SAVEUP TO

25%

Single-Leverage Type• Heavy-duty construction • Front/side gib adjustment • Steel pinions and rams • Four-position anvil• Palmgren includes

punch set for specialized pressing

Arbor Presses

Tons of Max. Wt. Reg. Sale Pressure Work Ht. Lbs. Model # Price Price Enco 1⁄2 41⁄2" 25 KN805-1005 $50.74 $38.00 1 51⁄4 40 KN805-1010 61.31 52.00 3 121⁄2 160 KN805-1030* 159.21 151.00 Palmgren 1⁄2 41⁄2 25 KN890-8802 62.78 56.00 1 51⁄2 32 KN890-8803 86.31 77.00 2 8 68 KN890-8804 172.62 155.00 3 121⁄2 160 KN890-8805* 255.00 229.00 4 153⁄4 225 KN890-8806* 551.19 496.00*Truck Shipment

As Low As

$38

R8 Round Collet Sets• Hardened and

ground throughout • 7⁄16"-20 drawbar thread

Reg. Sale Set Sizes Model # Price Price 6 Pc. 1⁄8-3⁄4" x 8ths KN231-4606 $29.36 $23.95 13 Pc. 1⁄8-7⁄8 x 16ths KN505-5022 117.07 69.95

Starting At

$2395

SAVEUP TO

40%

Low Description Size of Stops Model # Price Standard Set 15, 20 & 25mm KN240-2994 $209.00 Deluxe Set 15, 20, 25, KN240-2995 365.00 30 & 35

Chuck Stop Sets

• Easily locate short parts in a 3-jaw lathe chuck

• Stop allows short parts to project past the chuck jaws, providing clearance for facing operations

• Front and back locating surfaces are parallel within ±.0004"

• Accommodates chuck jaws up to 55mm (2.16") wide

• Three strong magnets secure stop to chuck face Starting At

$209

Milling & Drilling Table• Low silhouette table for light-duty work• Table fastens readily to the machine by

means of a central base bolt • Adjustable gibsSpecifi cations:• .100" per dial revolution• Rotatable and graduated 360°, locks by two

set screws and internal locking shoes • Travel 5" on each axis• Base: 45⁄8" diameter with integral

11⁄8" long base bolt for mounting • 7 x 7" table • 41⁄4" height • Wt.: 18 lbs.



Morse Head Reg. Sale Taper Dia. OAL Model # Price Price 2 2.49" 5.37" KN251-4002 $53.81 $39.95 3 3.07 6.77 KN251-4003 60.60 45.95 4 5.04 7.62 KN251-4004 117.68 104.95 5 5.74 9.59 KN251-4005 213.26 189.95

Bull Nose Live Centers• For machining pipe and other hollow-shaped work

Starting At

$3995SAVE

UP TO

25%

Keep T-slot Tables Clean & Chip Free!

T-Slot Machine Shop Brush

• Hardwood handle • Zinc-plated T-slot• Yellow polyester

bristles, 17⁄8"L• 91⁄2 x 4"W



14-15 HD 14-09 MTA_DP.indd 1414-15 HD 14-09 MTA_DP.indd 14 8/14/14 9:05 AM8/14/14 9:05 AM



























you select the Right Machine! Drill Presses

Drill PressesBench & Floor Models

• All models include drill chuck plus drill chuck arbor on fl oor models• Motor and electrics: 1⁄2 hp, 115/230v, 1 ph. (1 hp, 120v, 1 ph. on 211⁄8" model)• Table T-slots: 1⁄2" (3⁄4" on 211⁄8" model) • Table tilt: 45° (40° on 211⁄8" model)

Bench Model

Floor Model

Specifi cations Bench Model Floor Models Swing: 10" 133⁄4" 17" 211⁄8" Drilling capacity: 1⁄2" 5⁄8" 3⁄4" 1" Spindle taper: 33JT 2 MT 2 MT 3 MT Quill travel: 23⁄8" 31⁄8" 31⁄4" 413⁄16" Chuck capacity: 1⁄2" 5⁄8" 5⁄8" 5⁄8” No. of speeds/rpm range: 5/680-3160 16/210-3600 16/240-3380 12/180-4200 Overall height: 295⁄16" 621⁄2" 64" 70" Table size: 77⁄8 x 77⁄8" 9 x 9" 111⁄2 x 111⁄2" 185⁄8 x 161⁄8" Column diameter: 23⁄8" 27⁄8" 31⁄8" 35⁄8" Base size: 131⁄8 x 8" 173⁄4 x 101⁄2" 195⁄8 x 117⁄8" 221⁄2 x 191⁄2" Approx. wt.: 73 lbs. 121 lbs. 187 lbs. 324 lbs. Model # KN327-5882 KN308-0058 KN308-0059 KN308-0060 Reg. Price $329.76 $516.98 $659.98 $1,011.98 Sale Price $259.95 $329.95 $459.95 $869.95

As Low As

$25995SAVE

UP TO

36%

Specifi cations Swing: 20" Capacity: 11⁄4" Mild Steel Spindle Travel: 61⁄2" Spindle to Base: 483⁄8" Max. Table Size: 22 x 19" Column Dia.: 4" Quill Dia.: 3" Horsepower: 11⁄2 Overall Height: 741⁄2" Overall Width: 22" Overall Depth: 36" Weight: 750 lbs.

• 11⁄2 hp, 220v, 1 ph. • 300-2000 rpm, 61⁄2" spindle travel • Heavy base with ground surface• 3 MT with drawbar (can accept

3 MT tang tooling) • 5⁄8" Table T-slots• Quick speed changes, easy

table adjustment • Positive depth control

20" Infi nitely Variable Speed Drill Press

1 year limited warranty!


$2,279Regular Price: $2,533.42

SAVE10%

15 & 20" Step Pulley Drill Presses

• Large quill allows greater accuracy • Cast-iron head • Head casting features a permanently lubricated ball-

bearing spindle assembly, using four heavy-duty ball bearings mounted in an enclosed quill for extended life

• Large ground steel column diameter for maximum head and table support

• Table tilts 45°

Specifi cations: 15" Bench Model 15" Floor Model 20" Floor Model Drills to center of circle: 15" 15" 20" Max. cast iron drilling cap.: 5⁄8" 5⁄8" 3⁄4" Max. steel drilling cap.: 1⁄2" 1⁄2" 5⁄8" Quill dia.: 17⁄8" 17⁄8" 21⁄4" Quill travel: 33⁄8" 33⁄8" 43⁄4" Spindle taper: 2 MT 2 MT 3 MT Speeds: 16 (200-3630 RPM) 16 (200-3630 RPM) 12 (150-4200 RPM) Table working surface: 8 x 8" 7 x 71⁄2" 13 x 141⁄2" Column dia.: 27⁄8" 27⁄8" 35⁄8" Base size: 11 x 181⁄2" 11 x 191⁄2" 223⁄4 x 173⁄4" Spindle to base: 24" 48" 431⁄2" Motor: 3⁄4 hp, 115v, 1 ph. 3⁄4 hp, 115v, 1 ph. 1 hp, 115/230v, 1 ph. Floor space required: 26L x 133⁄8W x 39"H 26L x 133⁄8W x 631⁄2"H 34L x 21W x 67"H Weight: 157 lbs. 167 lbs. 304 lbs. Mfr’s No. J-2530 J-2500 J-2550 Model # KN328-1040 KN328-1039 KN328-1041 Mfr’s List $649.00 $679.00 $1,299.00 Sale Price $529.00 $549.00 $985.00

15" Bench Model

15" Floor Model

20" Floor Model

2-YEARWARRANTY

SAVEUP TO

25%Starting At

$529

14-15 HD 14-09 MTA_DP.indd 1514-15 HD 14-09 MTA_DP.indd 15 8/14/14 9:06 AM8/14/14 9:06 AM









http://use-enco.com


Machinery ManualsLathes

*Lathe is prewired for 110v, but can be wired for 220v

• Headstock with tapered roller bearings• Hardened and ground ways • Reversing switch• Inch dials • Reinforced cross ribs

Wt. Reg. Sale Lbs. Model # Price Price Bench Lathe Only 250 KN893-1273 $1,295.98 $1,165.00 Bench Lathe with Cabinet Stand 328 KN308-0338 1,497.98 1,365.00

Specifi cations Swing Over Bed: 9" Swing Over Cross Slide: 51⁄4" Distance Between Centers: 20" Carriage Travel: 16" longitudinal, 41⁄2" cross 2 Longitudinal Feeds: .005, .007" 27 Inch Threads: 8-56 tpi 11 Metric Threads: .5-3mm Tailstock Spindle Travel: 1.57" (40mm) Compound Travel: 2" Tailstock Taper: 2 MT Spindle Taper: 3 MT Spindle Bore Dia.: .787" (20mm) Motor & Electrics: 3⁄4 hp, 110v*, 1 ph. 6 Spindle Speeds: 130-2000 rpm Machine Dimensions: 38L x 181⁄2W x 16"H Spindle Nose Mounting: 11⁄2-8"

Quick-change gearbox for easier threading9" x 20" Bench Lathes

SAVEUP TO

10%1-YEAR LIMITED

WARRANTY

Starting At

$1,165• 4" 3-Jaw Chuck • 7" 4-Jaw Chuck • Steady Rest• Follow Rest • Metric Change Gears • 7" Faceplate• 2 MT Dead Center • Threading Dial • Toolbox with Tools • 1⁄2" Capacity, 4-Way Tool Post

Standard Equipment

• Hardened and ground bed with reinforced cross ribs• Headstock with tapered roller bearings• Thread chasing dial • Easy speed changes• Splash lubrication in headstock • Removable gap block• Electromagnetic starter switch • 3-year warranty DROs

Starting At

$2,99595Standard Equipment• 6" 3-Jaw Chuck • 7" 4-Jaw Chuck• Steady Rest • Follow Rest • 10" Faceplate • Chip Pan• 3 MT Dead Center • 11⁄16" Capacity • 4-Way Tool Post • Metric Change Gears• Threading Dial • Toolbox with Tools

Specifi cations 12" x 36" 13" x 40" Swing Over Bed: 12" 13" Table Work Surface Area: 12" x 36" 13 x 40" Swing Over Gap: 17" 183⁄4" Length of Gap: 9" 9" Swing Over Cross Slide: 71⁄2" 8" Swing Over Compound: 3" 3" Distance Between Centers: 36" 391⁄3" Carriage Travel: 30" 34" Long. Feed Range (Inch./Rev.): .0011-.0311" .0011-.0311" 40 Inch Threads: 4-112 tpi 4-112 tpi 29 Metric Threads: .24-4.5mm .25-4.5mm Cross-Slide Travel: 61⁄2" 51⁄8" Cross-Slide Feed Range (Inch./Rev.): .0015-.0302" .0004-.0105" Compound Travel: 25⁄8" 211⁄16" Tailstock Spindle Travel: 35⁄8" 33⁄4" Tailstock Taper: 3 MT 3 MT Spindle Nose Mounting: D1-4 D1-4 Spindle Bore Dia.: 11⁄2" 11⁄2" Spindle Taper: 5 MT 5 MT Spindle Taper with Sleeve: 3 MT 3 MT 18 Spindle Speeds: 60-1550 rpm 60-1500 rpm Motor & Electrics: 11⁄2 hp, 220v, 1 ph. 11⁄2 hp, 220v, 1 ph. Machine Dimensions (w/o stand): 22H x 26W x 60"L 25H x 26W x 67"L Floor Space Required (Max.): 30W x 70"L 34W x 72"L

12" x 36" & 13" x 40" Geared Head Gap Bed Bench Lathes

SAVEUP TO

$1,141

1-YEARLIMITED WARRANTY

Wt. Reg. Sale Description Lbs. Model # Price Price Lathe ONLY 12" x 36" 1050 KN411-0105 $3,736.98 $2,995.95 13" x 40" 1100 KN411-0106 $4,176.98 $3,759.00 Lathe with Cabinet Stand 12" x 36" 1250 KN411-0126 4,036.98 3,195.95 13" x 40" 1345 KN411-0133 4,496.98 4,059.00 Lathe with Cabinet Stand with ACU-RITE® VUE 2-Axis DRO Installed 12" x 36" 1285 KN411-0128 5,436.98 4,295.95 13" x 40" 1355 KN411-0135 5,876.98 5,189.00

16-17 HD 14-09 Lathes.indd 1616-17 HD 14-09 Lathes.indd 16 8/14/14 9:07 AM8/14/14 9:07 AM










Online at use-enco.com Lathes

1-YEARLIMITED

WARRANTY

31⁄8" Spindle Bore• Spindle is supported by two tapered and one ball bearing• Chrome molybdenum headstock gears are hardened, ground and shaved• Univeral gearbox allows inch, metric, diametral and module pitch threads,

no change gears required• Carriage features

one-shot lubrication and Turcite-B on bed sliding surfaces

• High-quality ANSI Class 50 wear-resistant, cast-iron bed ways are hardened and ground

• Removable gap allows up to 235⁄8" diameter

• Five-position automatic carriage stop increases productivity

• T-slotted compound slide featuring a four-way tool post

Reg. Sale Description Model # Price Price Lathes ONLY 14" x 40" KN328-1312 $10,894.98 $9,995.00 16" x 60" KN328-1313 11,899.98 10,995.00 Big Bore Lathe Pkg., PLUS Installed ACU-RITE® VUE 2-Axis DRO System 14" x 40" KN328-6126 11,794.98 10,849.00 16" x 60" KN328-6127 13,094.98 11,995.00

Standard Equipment• 10" 3-jaw chuck with top reversing jaws• 12" 4-jaw chuck• 12" faceplate• 4-way tool post• Follow rest• Large capacity steady rest• Fully integrated coolant system• Full length splashguard and coolant return• Large easy-to-use foot brake• Articulating halogen work lamp• Centrally located controls with jog button• Threading dial• Mounting pads and levelers• Dead center• Live center• Toolbox and adjusting tools

Specifi cations 14" x 40" 16" x 60" Swing Over Bed: 14" 16" Swing Through Gap: 235⁄8" 257⁄8" Length of Gap: 121⁄4" 121⁄4" Swing Over Cross Slide: 75⁄8" 10" Distance Between Centers: 40" 60" Max. Carriage Travel: 35" 55" Range of Longitudinal Feeds (In./Rev.): .0015-0.0913" .0015-0.0913" Max. Cross-Slide Travel: 9" 9" Range of Cross Feed (In./Rev.): .0006-0.0365" .0006-0.0365" Max. Compound Slide Travel: 51⁄8" 51⁄8" 61 Inch Threads: 15⁄8-72 tpi 15⁄8-72 tpi 24 Metric Threads: .05-20mm tpi .05-20mm tpi Tailstock Spindle Travel: 5" 5" Tailstock Taper: 4 MT 4 MT Spindle Mount: D1-8 D1-8 Spindle Bore: 31⁄8" 31⁄8" Spindle Taper (with sleeve): 7 MT (5 MT) 7 MT (5 MT) 12 Spindle Speeds: 42-1800 rpm 25-1800 rpm Overall Dimensions: 971⁄2L x 40W x 467⁄8"H 1161⁄2L x 40W x 48"H Motor & Electrics: 71⁄2 hp, 230/460V, 71⁄2 hp, 230/460V, 3 ph., Prewired 230V 3 ph., Prewired 230V Wt.: 4,987 lbs. 5,595 lbs.

Big Bore Geared-Head Engine Lathes

As Low As

$9,995

Specifi cations 13" x 40" 14" x 40" Swing Over Bed: 13" 14" Swing Over Gap: 19" 20" Length of Gap: 93⁄8" 93⁄8" Swing Over Cross Slide: 7" 81⁄2" Swing Over Compound: 31⁄2" 31⁄2" Carriage Travel: 371⁄2" 371⁄4" Long. Feed Range (In./Rev.): .0012-.0294" .0012-.0294" 40 Inch Threads: 4-112 tpi 4-112 tpi 22 Metric Threads: .45-7.5mm .45-7.5mm Cross-Slide Travel: 6" 6" Cross-Slide Feed Range: .0003-.0100" .0003-.0100" Compound Travel: 31⁄2" 31⁄2" Tailstock Spindle Travel: 43⁄4" 43⁄4" Tailstock Taper: 3 MT 3 MT Spindle Nose Mounting: D1-4 D1-4 Spindle Bore Dia.: 17⁄16" 17⁄16" Spindle Taper: 5 MT 5 MT Motor & Electrics: 3 hp, 220v 3 hp, 220v, 3 ph. Machine Dimensions: 713⁄4L x 31W x 455⁄8"H 713⁄4L x 31W x 491⁄8"H

13" x 40" & 14" x 40" Geared Head Gap Bed Engine Lathes8 Speeds, 90 to 1800 rpm

• Jog button for easy gear engagement and spindle inching

• Quick speed changes• Splash lubrication in headstock • Totally enclosed gearbox• Hardened and ground bedways• Spindle with tapered roller bearings• 3-year warranty on DRO

Shown with DRO

Wt. Reg. Sale Description Lbs. Model # Price Price Engine Lathe ONLY 13" x 40" 1940 KN319-9733 $6,198.98 $5,699.00 14" x 40" 1940 KN308-0232 6,598.98 5,939.00 Engine Lathe with ACU-RITE® VUE 2-Axis DRO Installed 13" x 40" 1976 KN319-9734 7,498.98 6,749.00 14" x 40" 1976 KN308-0235 8,098.98 7,289.00

1-YEAR LIMITEDWARRANTY

p

SAVEUP TO

$809Starting At

$5,699

• 4-Way Tool Post • Backplate• Steady and Follow Rests• Chip Pan • 12" Faceplate • Coolant System • Live and Dead Centers • Foot Brake • Splashguard • 6" 3-Jaw and 8" 4-Jaw Chucks

Standard Equipment

FREEPLUS

16-17 HD 14-09 Lathes.indd 1716-17 HD 14-09 Lathes.indd 17 8/14/14 9:08 AM8/14/14 9:08 AM









http://use-enco.com

http://use-enco.com


Conserve Your Cash! Ask us aboutMill/Drills

SAVEUP TO

$904

• Forward and reversing switch for tapping• 360° head swivel

163⁄8" Mill/Drills

• Drill Chuck with Key• Drill Chuck Arbor • 52 Pc. Clamping Kit• Shell Mill Arbor • Angle Drill Press Vise• Face Mill

Standard Equipment

Specifi cations Speeds: 150-3000 rpm Swing: 163⁄8" Long. Table Travel: 17" Table Work Surface Area: 81⁄4 x 281⁄2" Cross Table Travel: 71⁄4" Capacity: Drilling Steel: 11⁄4" Drilling Cast Iron: 11⁄2" End Mill/Face Mill: 3⁄4"/3" 4 T-Slots: 5⁄8" Spindle/Quill Travel: 5"* Spindle Taper: R8 Spindle to Table (Max.): 18" Spindle to Column (Max.): 65⁄8" Spindle/Quill Dia.: 3" Motor & Electrics: 11⁄2 hp, 110/220v, 1 ph. Machine Dimensions: 431⁄2H x 38W x 36"D Floor Space (Max.): 62W x 50"D* 4" with power downfeed


Starting At

$1,345 Wt. Reg. Sale Description Lbs. Model # Price Price Mill/Drill Only w/o Power Downfeed 645 KN105-1110 $1,583.38 $1,345.00 w/Power Downfeed 690 KN105-1300 2,322.30 1,995.95 Mill/Drill with Cabinet Stand with Chip Pan w/o Power Downfeed 725 KN105-1108 1,709.98 1,453.00 w/Power Downfeed 775 KN105-1298 2,509.98 2,249.95 Mill/Drill with 2-Axis ACU-RITE® VUE DRO, Enco Power Table Feed, Cabinet Stand w/o Power Downfeed 765 KN240-7152 3,359.98 2,855.00 w/Power Downfeed 785 KN240-7154 4,099.98 3,279.95 Mill/Drill with 3-Axis ACU-RITE® VUE DRO, Enco Power Table Feed

and Cabinet Stand with Chip Pan w/o Power Downfeed 765 KN240-7155 3,759.98 3,195.00 w/Power Downfeed 818 KN240-7157 4,499.98 3,595.95

Low For Use With Mfr’s # Model # Price ENCO Models 307-3379 and 307-3387 SLRF40 KN404-1550 $69.00 ENCO Models 326-1022 and 326-1021 SLRF45 KN404-1549 69.00 ENCO Models 325-5184, 404-0045 and 405-0593 SLCL45 KN404-1552 69.00

Spindle Locks for Mill/Drills

Your Choice

$69

Simply bolt the Spindle-Lock onto the head of your mill and within minutes, you have an easy-to-use way of “locking” your spindle for tool changes.Just press the big button in front and the plunger locks into the groove of the spline. When your tool change is complete, simply release the button and the plunger springs away from the spline – of course, you still have to remember to remove your drawbar wrench! Speaking of the drawbar wrench, you can slide it into place on top of the Spindle-Lock.Now you’ll always know where your drawbar wrench is.IMPORTANT! The Spindle-Lock only remains actuated by depressing the large button.

KN411-0089 shown

20" Square Column Mill/Drills

Starting At

$2,195

Specifi cations Table Size: 91⁄2 x 311⁄2" 6 Spindle Speeds: 120, 210, 345, 670, 1180, 1970 rpm Capacity: Drilling Steel: 19⁄16" Drilling Cast Iron: 13⁄4" End Mill: 11⁄4" Face Mill: 31⁄8" Table Travel (Longitudinal): 22" Cross Table Travel: 8" 4 T-Slots: 1⁄2"W Spindle Quill Travel: 43⁄4" Spindle Taper: R8 Spindle/Quill Dia.: 3" Spindle to Table (Max): 183⁄4" Head Tilt: 90° L, 90° R Motor & Electrics: 2 hp, 220v, 1 ph. Prewired: 220v, 1 ph. Machine Dimensions: 421⁄2W x 28D x 57"H Max. fl oor space req.: 771⁄8W x 311⁄2"D


Wt. Reg. Sale Description Lbs. Model # Price Price Mill/Drill Only 662 KN405-0593 $2,616.98 $2,195.00 Mill/Drill with Stand 810 KN411-0087 2,899.99 2,395.00 Mill/Drill with Stand and Installed Enco Power Table Feed 841 KN411-0088 3,299.99 2,795.00 Mill/Drill with Stand, Installed Enco Power Table Feed and ACU-RITE VUE® 2-Axis DRO 845 KN411-0089 4,499.99 3,795.00

• Head tilts left and right• 6-speed geared head• Dovetail column ways• Quick spindle changes with quick

select gearshift, no belts to change

SAVEUP TO

$704

• Face Mill with Arbor• Drill Chuck Arbor• Drill Chuck & Key

Standard Equipment

NOW WITH

18-19 HD 14-09 MD_M.indd 1818-19 HD 14-09 MD_M.indd 18 8/14/14 9:11 AM8/14/14 9:11 AM


















our Lease Payment Plans today! Mills

SAVEUP TO

$1,937

• Certifi ed Meehanite casting stress relieved toprovide a rigid machine structure

• Way covers for knee and crossfeed • Precision-hardened and ground table and ways• Dynamically balanced head for quiet, trouble-free operation• One-shot lubrication and solid quill feed • Head tilts 90° R/L, 45° forward/back• U.S. patented ram locking system • Turret swivels 360° • Hand-scraped turret column ways• Dovetail ways (9" x 49"); Square ways (10" x 54")• Upper and lower surface of saddle

laminated with Turcite-B for smooth, accurate and wear-resistant surfaces

• 3-year warranty on DRO

Wt. Reg. Sale Description Lbs. Model # Price Price Mill Only 9 x 49" 2227 KN307-3678 $8,356.98 $7,100.00 10 x 54" 3400 KN890-9988 9,986.98 8,359.00 Mill with Power Table Feed and Newall 2-Axis DRO 9 x 49" 2246 KN414-2113 10,338.98 8,779.95 10 x 54" 3440 KN414-2116 11,968.98 10,169.95 Mill with Power Table Feed and Newall 3-Axis (Quill) DRO 9 x 49" 2251 KN414-2114 10,806.98 9,179.95 10 x 54" 3445 KN414-2117 12,436.98 10,569.95 Mill with Power Table Feed and Newall 3-Axis (Knee) DRO 9 x 49" 2251 KN414-2115 10,906.98 9,269.95 10 x 54" 3445 KN414-2118 12,536.98 10,599.95


Specifi cations 9" x 49" 10" x 54" Variable Speed: 70-4200 rpm 70-4200 rpm Longitudinal Travel: 35" w/o Power Feed 39" w/o Power Feed 3 T-Slots: 5⁄8" x 11⁄4 5⁄8" x 11⁄4 Saddle Cross Travel: 12" 16.5" Knee Travel: 161⁄2" 173⁄4" Spindle/Quill Travel: 5" 5" Spindle Taper: R8 R8 Spindle Diameter: 3.375" 3.375" 3 Spindle Feeds (Inch/Rev.): .0015, .003, .006" .0015, .003, .006" Spindle to Table: 0-18 5⁄16" 0-20" Spindle to Column: 5-20" 7-26" Head Swivel, w/Locks RH/LH: 90°/90° 90°/90° Head Tilt-Forward & Back: 45°/45° 45°/45° Ram Turret Swivel: 360° 360° Ram Travel: 12" 18" Motor & Electrics: 3 hp, 220/440v, 3 ph. 3 hp, 220/440v, 3 ph. Machine Dimensions: 85H x 59W x 55"L 88H x 72W x 66"L Machine Base Dimensions: 371⁄2 x 24" 43 x 24" Floor Space Required (Max.): 140W x 70"D 150W x 94"D

Starting At

$7,1009" x 49" & 10" x 54" Variable Speed Vertical MillsWith Newall DP700 Series DROs

SAVEUP TO

$1,720

• Head tilts 90° right/left, 45° forward/back • Precision Y-axis, leadscrew-bearing hub with a maximum .005" deviation to Y-axis centerline, giving fl uid in/out motion to the saddle

• Precision squareness of table surface to the guideway; .00078"/12" travel • Turret swivels 360° • Parallelism of table surface to longitudinal movement;

.00078"/12" travel • R8 spindle taper • 3 T-slots: 5⁄8" • 3.375" spindle dia.• 3 spindle feeds: .0015, .003, .006" • 0-18" spindle to table• Backlash adjustment • One-shot lubrication to table and saddle;

gravity feed lubricator for spindle • Drawbar and tool kit

1-YEARLIMITED

WARRANTY

Specifi cations 9" x 42"/9" x 49" 10" x 54" Speeds: 80-4800 rpm (9"x42"), 78-4200 rpm 60-4200 rpm (9"x49") Longitudinal Travel: 30" (9"x42"), 35" (9"x49") 38.5" Saddle Cross Travel: 13.5" 17" Knee Travel: 16" 17.5" Spindle/Quill Travel: 5" 5.1" Spindle to Column: 5.5-20" 4.5-20" Ram Travel: 14.5" 19" Motor & Electrics: 2 hp, 220v, 3 ph. 3 hp, 220/400v, 3 ph. Machine Dimensions: 85 x 71 x 74" 841⁄2 x 72 x 75"

9" x 42", 9" x 49" & 10" x 54" Variable Speed Vertical Mills

Wt. Reg. Sale Size Lbs. Model # Price Price Mill Only 9 x 42" Step Pulley 2400 KN100-1527 $6,959.98 $5,829.95 9 x 49" Variable Speed 2650 KN100-1599 7,558.98 6,575.00 10 x 54" Variable Speed 2840 KN100-1588 9,173.98 8,256.00 All Packages Include Installed Enco 150 In./Lb. Torque Power Table Feed Vertical Mill Packages 9 x 42" Step Pulley 2415 KN505-6781 7,259.98 5,995.95 9 x 49" Variable Speed 2665 KN505-6790 7,958.98 6,679.95 10 x 54" Variable Speed 2855 KN505-6796 9,473.98 7,996.95 Mill with Enco 150 in./lbs. Torque Power Table Feed and ACU-RITE® VUE 2-Axis DRO System Installed 9 x 42" Step Pulley 2435 KN890-9181 8,459.98 6,595.95 9 x 49" Variable Speed 2690 KN890-9190 9,158.98 7,879.00 10 x 54" Variable Speed 2836 KN890-9196 10,873.98 9,600.00 Mill with Enco 150 in./lbs. Torque Power Table Feed and ACU-RITE® VUE 3-Axis (Quill) DRO System Installed 9 x 42" Step Pulley 2440 KN890-9182 8,859.98 7,139.95 9 x 49" Variable Speed 2695 KN890-9191 9,458.98 8,229.00 10 x 54" Variable Speed 2891 KN890-9197 11,173.98 9,965.00 Mill with Enco 150 in./lbs. Torque Power Table Feed and ACU-RITE® VUE 3-Axis (Knee) DRO System 9 x 42" Step Pulley 2440 KN890-9183 8,909.98 7,395.95 9 x 49" Variable Speed 2695 KN890-9192 9,608.98 8,269.00 10 x 54" Variable Speed 2891 KN890-9198 11,223.98 9,999.00

Starting At

$5,82995

KN890-9198 shown

18-19 HD 14-09 MD_M.indd 1918-19 HD 14-09 MD_M.indd 19 8/14/14 9:12 AM8/14/14 9:12 AM

























http://use-enco.com


We stock over 20,000 ReplacementBandsaws

SAVEUP TO

$370

Cutting Reg. Sale Width Model # Price Price 14" KN135-1545 $2,978.88 $2,769.95 18 KN135-1551 3,351.68 2,979.95

14" & 18" Vertical BandsawsInfi nitely Variable Speed

• Cuts steel, aluminum alloys, cast iron, brass, plastic or plexiglass• Table inclination 15° front and back, 15° right and left


• Large cap. built-in welder and grinder• 1⁄8" to 5⁄8" width cap.• Grinding wheel and built-in light• Blade cutter

Standard Equipment

Starting At

$2,76995

Specifi cations 14" 18" Cap. Thickness: 91⁄4" Max. 10" Max. Table Size: 193⁄4 x 193⁄4" 231⁄2 x 191⁄2" Blade Length: 114.7" 136" Blade Width: 3⁄32 to 5⁄8" 3⁄32 to 5⁄8" Blade Thickness: .025" .025" Speeds: 65 to 265 sfpm 80 to 320 sfpm Floor to Table Ht.: 391⁄4" 381⁄4" Overall Height: 68" 79" Welder: 1.2 kva 2.4 kva Motor & Electrics: 1 hp, 220v, 1 ph. 1 hp, 220v, 3 ph. Wt.: 760 lbs. 770 lbs.

SAVEUP TO

50%on 5+

Bi-Metal Bandsaw BladesWelded to Length

• Cobalt high-speed steel cutting edge • Designed for long life in a wide variety of utility and contour

cutting operations • Thickness: .035" • Variable tooth

EachQty.: 5+

As Low As

$2395

Blade Mfr’s Sale Price Each L W tpi Model # List 1-4 5+ 7' 9" 3⁄4" 6-10 KN371-0410 $46.26 $32.95 $23.95 7' 9 3⁄4 10-14 KN371-0412 46.26 32.95 23.95 10' 3⁄4 6-10 KN240-4965 55.07 30.95 25.95 10' 3⁄4 10-14 KN240-4966 55.07 30.95 25.95 10' 1 10-14 KN240-4967 63.01 30.95 25.95 11' 6" 1 5-8 KN240-4831 70.80 42.95 35.95 11' 6" 1 10-14 KN371-0446 70.80 44.95 37.95

5" x 6"Horizontal/Vertical Bandsaw3 Speeds• Vise swivels 45° left • 1⁄3 hp, 110/220v motor • Speed changes 80, 120, 200 sfpm • Automatic cut-off safety switch• Mitering vise & blade guard• Wt.: 125 lbs.

Specifi cations Max. Workpiece Width: 6" Throat Depth: 41⁄8" Horizontal Cap. Round: 5" Blade Size: 641⁄2 x 1⁄2 x .025" Wheel Dia.: 73⁄8" Vertical Saw Height: 56" Horizontal Saw Height: 38" Machine Dim.: 38L x 12"D




al

sfpm

SAVE10%

Replacement Blade

Flexback 6 tpi• 135 x 1 x .035"Model # KN990-4073Sale Price $19.95 1 year limited warranty!

10" x 16" Swivel Frame Bandsaw• Heavy-duty, cast-iron frame• Blade chip brush • Safety guards• Automatic stop • Coolant system• KN136-2810 features swivel frame and

90-45° quick-acting vise• KN136-2800 features 90-60° quick-acting vise

Specifi cations Motor & Electrics: 2 hp, 220/440v, 3 ph., 60 Hz, 1750 rpm 4 Blade Speeds: 82, 131, 167 & 232 sfpm Cutting Cap. 90°: 10 x 16" Cutting Cap. 45°: 9 x 10" Blade Size: 135 x 1 x .035" Machine Dim.: 67L x 22"D Approx. Wt.: 1068 lbs.

SAVE$490


$4,40995Regular Price: $4,899.98

20-21 HD 14-09 Bandsaws.indd 2020-21 HD 14-09 Bandsaws.indd 20 8/14/14 9:15 AM8/14/14 9:15 AM
















Parts for the Machines We Sell! Bandsaws

SAVE$240

Specifi cations Motor & Electrics: 1 hp, 220v, 60 Hz, 1 ph., 1720 rpm 3 Blade Speeds : 127, 216, 268 sfpm Cutting Capacity 90°: 7 x 101⁄2", 7" round Cutting Capacity 45°: 4 x 41⁄2", 4" round Blade Size: 93 x 3⁄4 x .032" Machine Dimensions: 50L x 221⁄2"D Approx Wt.: 400 lbs.

7" x 101⁄2" Horizontal/Vertical BandsawGeared Swivel Head for Quick Speed Changes


$1,52995Regular Price: $1,769.98

• Heavy cast-iron base with quick-lock vise

• Hydraulic feed and coolant system • Hardened and ground worm gear,

vertical table saw


• Heavy cast-iron base with quick swivel lock vise and vertical saw table

• Adjustable hydraulic downfeed and coolant system• Safety automatic shutoff and adjustable material stop• Worm gears are hardened and ground• Roller cabinet has built-in chip pan• Motor & electrics: 1 hp, 220v, 1 ph., 1720 rpm• Model # KN137-3190 includes blade guards,

chip brush, adjustable roller blade guides• Model # KN137-3195 has a geared head

for quick speed changes

7" x 12" Horizontal/Vertical Bandsaws

Specifi cations KN137-3190 KN137-3195 Blade Speeds: (4) 85, 130, 180, 285 sfpm (3) 127, 216, 268 sfpm Blade Size: 93 x 3⁄4 x .032" 93 x 3⁄4 x .032" Cutting Cap. 90˚: 7 x 12", 7" Round 7 x 12", 7" Round Cutting Cap. 45˚: 41⁄2 x 7" Approx. Wt.: 350 lbs. 350 lbs.

Reg. Sale Description Model # Price Price Horiz./Vert. Bandsaw KN137-3190 $1,099.98 $989.95 Geared Head Horiz./Vert. Bandsaw KN137-3195* 1,299.98 1,039.95 *230v

KN137-3190

SAVEUP TO

20%

Starting At

$98995


Specifi cations: Motor & Electrics: 1.5 hp, 110v, 1 ph. Blade Speed (No.) Range sfpm: KN337-9149: (4) 114, 196, 288, 377 KN337-9150: (Variable) 95-402 Capacity: Round: 9" Rectangle @ 90°: 5" x 16" Rectangle @ 45°: 8" x 91⁄2" Blade Size: 1149⁄16" x 1" x 0.035" Machine Dimensions: 62"L x 22"D x 481⁄2"H

9" x 16" Horizontal BandsawsStep Pulley & Variable Speed Models

Features:• High effi ciency gear drive system

(RF-916S: Step Pulley, RF-916SV: Variable Speed)

• Fully adjustable hydraulic downfeed• 0 to 45° cutting angle• Carbide bearing blade guide enhances

cutting stability and extends blade life• Coolant system for wet cutting• Stand with integral chip/water panIncludes: Bi-metal blade, chip brush and length stop set.

Wt. Reg. Sale Description Mfr’s # Lbs. Model # Price Price Step Pulley RF-916S 640 KN337-9149 $2,968.22 $2,395.00 Variable Speed RF-916SV 640 KN337-9150 3,310.70 2,595.95

SAVEUP TO

21%

SAVEOVER

$100

Hard Edge Flex Back Blade – 7'9"L x 3⁄4"W

Specifi cations Motor & Electrics: 1 hp, 110v, 60 Hz, 1725 rpm 4 Blade Speeds: 90, 135, 195, 255 sfpm Blade Size: 93 x 3⁄4 x .032" Cutting Cap.: 7 x 12" Approx. Wt.: 314 lbs.

Replacement Blades

7" x 12" Horizontal/Vertical BandsawHydraulic Feed & Coolant Pump

• Portable on four 5" casters• Heavy cast-iron base with

quick-lock vise, vertical table saw

• Hardened and ground worm gears

• Auto shut-offIncludes:10 x 10" vertical table and 45° swivel vise.




Reg. Sale tpi Model # Price Price Carbon—.032" Thick 8 KN371-3164 $12.94 $9.99 14 KN371-3165 12.94 9.99

20-21 HD 14-09 Bandsaws.indd 2120-21 HD 14-09 Bandsaws.indd 21 8/14/14 9:15 AM8/14/14 9:15 AM
















http://use-enco.com


Ask the Enco Tech Team to helpSanding & Finishing

Specifi cations Belt Size: 4 x 36" Table Size: 5" x 71⁄2" Disc Size: 6" Main Motor: 110v, 1⁄4 hp, 60 Hz, 1 ph. Speed: 1720 rpm Machine Dim.: 20 x 16 x 12" Approximate Wt.: 38.64 lbs.

• Disc angle and bevel sanding • Finish edging• Sanding arm locks and can be used in any

position from horizontal to vertical

Combination 4" x 36" Belt & 6" Disc Sander



6" x 89" Belt Edge SanderWith Heavy-Duty Stand

• Table can be tilted for horizontal/vertical sanding • Belt tension can be easily adjusted • 32" table length• 2 hp, 60 Hz motor, 110/220v• 3900 fpm • Approx. wt.: 240 lbs. Low Price

Model # KN163-6089

$69898

SAVE20%

12" Disc Sander

Specifi cations Disc Diameter: 12" Motor & Electrics: 1 hp, 115v, 1 ph. Spindle Speed: 3470 rpm Table Size: 8" x 171⁄2" Approx. Wt.: 70 lbs.

• Excellent for both wood and metal • Great for deburring • Uses low cost PSA discs • Complete with miter gage



SAVEUP TO

25%

6" x 48" Belt & 10" Disc Sander• Belt operates in horizontal

or vertical position• Two cast-iron tilt tables• Miter gage standard• 1 hp, 115v, 1-phase motor• 1650 sfpm belt

speed/1750 rpm disc speed

• Wt.: 170 lbs.

MFR'S 1-YEARLIMITED WARRANTY

Reg. Sale Description Model # Price Price Rockford KN510-2582 $817.48 $649.00 JET KN328-1056 1,139.05 899.00

As Low As

$649

SAVE17%

Combination 1" x 42" Belt& 8" Disc Sander

• Belt table tilt: 45° out • Disc table size: 4 x 10"• Disc table tilt: 45° out • Dust collection outlet: 11⁄2" dia.• Overall dimensions: 22 x 21 x 14"• Belt table size: 61⁄8 x 71⁄8"• 3000 sfm belt speed• 1725 rpm disc speed• 1⁄3 hp, 115v, 1 ph.,

60 Hz motor• Approx. wt.: 62 lbs.Mfr’s # J-4002


$419Mfr’s List: $509.00

SAVE22%On Dust Collector

Portable Dust Collector

Specifi cations Motor & Electrics: 1 hp, 110v, 1 ph. Blower Capacity: 750 cfm Bag Connections: 1 Connector Diameter: 4"

• Portable - easily moved from job to job• 4" intake handles large chips and sawdust

easily and effectively• Heavy-duty carrying frame• Ball bearing casters

for easy rolling• Wt.: 45 lbs.



Low Description Wt. Model # Price Replacement Dust Bag 1 lb. KN150-3027 $12.82

Accessory

SAVEUP TO

37%

• Extended shafts for buffi ng and polishing odd-shaped pieces

• Bearings lubricated for long life

• 3450 rpm • Cast-iron housing • Buffi ng wheels not included

Electric Buffers

Buffi ng Shaft Reg. Sale hp Wheel Dia. Dia. Model # Price Price 1⁄2 8" 3⁄4" KN619-2891 $242.68 $169.95 1 10 1 KN619-2892 470.60 295.95

Starting At

$16995

22-23 HD 14-09 S&F.indd 2222-23 HD 14-09 S&F.indd 22 8/14/14 9:22 AM8/14/14 9:22 AM












you select the Right Machine! Sanding & Finishing

SAVE31%

Wet-Dry Grinder

8"/5"• 8" wet grinder wheel for fi ne fi nishing• 5" dry wheel for removing deep nicks

and scratches without damaging• Blade holder for easy sharpening • 1⁄4 hp • Water tank for cooling• 3450 maximum rpm• 1" wheel width • 1" spindle• Wt.: 30 lbs.



Belt Sanders1" x 42" Sander—1⁄3 hp, 1-phase Motor• 1800 sfpm • Contact wheel • Tilt table • 1725 rpm2" x 48" Sander—1⁄2 hp, 1-phase, 115v Motor• Contact wheel • Tilt table • Removable platen • Fully hinged guard • Vertical or horizontal• 4500 sfpm • 3450 rpm4" x 36" Sander—1⁄2 hp, TEFC 1-phase, 115v Motor• Direct drive • 3450 rpm • Full OSHA safety guard• Easy opening side door

for belt change

1 x 42" Sander

Belt Wt. Reg. Sale Size Lbs. Model # Price Price 1 x 42" 29 KN505-1371 $286.11 $259.00 2 x 48 48 KN505-1370 452.43 409.00 4 x 36 50 KN240-3857 674.19 609.00

As Low As

$259

Dry Dust Collector• Effectively handles the collection of wood chips and sawdust• Single-stage design allows you economical, quiet operation• 4 casters allow total mobility• Powerful, single-phase motors are permanently lubricated,

totally enclosed, fan cooled and continuous-duty rated• High air velocity design creates a more powerful toolIncludes:• 50 micron fi lter bag • 30 micron collector bag • Single-hose connection • Wheel casters • Steel straps to secure bags • Connecting hose not included

Mfr’s Sale Description Model # List Price 30 Micron Collector Bag KN411-2046 $65.00 $57.95 50 Micron Filter Bag KN411-2047 63.00 54.95

Specifi cations Blower wheel dia.: 91⁄2" Sound rating @ 3": 60-70 dB Dia. of hose connection: 4" Bag dia.: 14" Filter/collector bag length: 235⁄8"/235⁄8" Collector bag capacity: 2.1 cu. ft. Air fl ow @ 4": 650 cu. ft./min. Static pressure (inch of water): 8.5 Overall dimensions: 27L x 14W x 57"H Motor: 1 hp, 1 ph., 115/230v, prewired 115v Weight: 88 lbs.

Mfr’s # DC-650


$389Mfr’s List: $442.00

SAVEUP TO

52%

Stand(optional)

• 3450 rpm • 115v/60 HzIncludes: • A bright, fl exible work

light (bulb sold separately) • Two grinding wheels: Coarse

36 grit and medium 60 grit

• Protective spark guard on each wheel with adjustable eye shield

• Durable cast-iron base withmounting holes and rubberfeet for easy mounting

Bench Grinder Stand• 27" height • Sturdy base with pre-drilled holes for

mounting on fl oors• Base mounting area for bench grinders: 101⁄2 x 71⁄2"

Bench Grinders

8" Bench Grinder

Starting At

$8595

Spindle Wt. Reg. Sale Description Size hp Amps Lbs. Model # Price Price 6" Grinder 1⁄2" 1⁄2 3.5 23 KN890-0832 $169.95 $85.95 8" Grinder 5⁄8 3⁄4 5.0 31 KN890-0833* 189.95 89.95 Stand 20 KN890-0834 98.95 59.95* 6' power cord

Specifi cations Belt Size: 1W x 30"L Disc Size: 5" Motor & Electrics: 1⁄4 hp, 110v, 1 ph. Table Tilt: 0° to 45° Approx. Wt.: 12.75 lbs.

Combination 1" x 30" Belt & 5" Disc SanderUse for Grinding, Sharpening, Sanding & Polishing Wood & Metal



SAVE15%

22-23 HD 14-09 S&F.indd 2322-23 HD 14-09 S&F.indd 23 8/14/14 9:24 AM8/14/14 9:24 AM












http://use-enco.com


Machinery ManualsMetal Fabricating

SAVEUP TO

21%

Hydraulic Presses

Cap. Base Wt. Reg. Sale Description Tons Stroke W Height Lbs. Model # Price Price Bench Model 12 6" 20" 37" 155 KN240-7754 $326.95 $295.00 Floor Model 12 6 24 613⁄4 190 KN890-0829 587.95 459.00 Floor Model 20 7 32 67 265 KN890-0830 713.95 559.00 Floor Model 50 63⁄4 38 73 600 KN890-0831 2,374.95 1,899.00

• All welded-steel construction • Heavy-duty return springs for fast ram retraction• Includes bed plates and bearing punch• 50 ton unit is used to press,

straighten, bend or remove and install gears and bearings

Starting At

$295


Starting At

$3,14995

SAVEUP TO

$743

52" Hydraulic & Pneumatic Shears

16 Gauge Capacity (mild steel)• Guarded foot switch • 3 hp, 220v• Cap. back gauge—27" • Cap. front gauge—26"

Wt. Reg. Sale Description spm Lbs. Model # Price Price Pneumatic 25 1155 KN130-5355 $3,707.98 $3,149.95 Hydraulic 60 1350 KN130-5345 4,943.98 4,200.00

40 Ton Ironworkers Fabrication Machine

SAVE$560

Features:• Punches, shears, notches, bends and forms• 110v AC, 1 ph.• All guarding complies with ANSI B11-5 standards• Meets American National Safety standards

for ironworkersStandard Equipment:• 2" die holder • Punch retaining nut and stripper• Power cavity includes 3-in-1 shearMfr’s # MP4000Accessories Reg. Sale Description Dimensions Mfr’s # Model # Price Price Brake for MP4000 8" MP4110 KN890-0444 $806.40 $645.00 Notcher - Heavy-Duty 2 x 13⁄4" MP4120 KN890-0445 806.40 645.00 5 Pc. Round Punch Starter Set 1⁄4, 3⁄8, 1⁄2, 5⁄8, 3⁄4" MP4140 KN890-0447 225.90 179.00

Specifi cations Rated on 65,000 psi Tensile Speed: spm Approx. 4-6 Motor: 3⁄4 hp, 110v, 1 ph. Throat Depth: 33⁄4" Punch Capacity: 40 Tons Pipe Notchers: 1⁄2, 3⁄4, 1, 11⁄2, 2" Shear: Flat Bar: 3⁄8" x 4" and 1⁄4" x 6" Angle: 1⁄4" x 3" x 3" Rod: 3⁄4" Square: 5⁄8" Hydraulics: 2500 psi Oil Capacity: 1 Gallon Dimensions: 24W x 551⁄4H x 30"L Weight: 410 lbs.




SAVEUP TO

18%

Blade Handle Wt. Reg. Sale L L Lbs. Model # Price Price 6" 28" 40 KN130-5710 $85.76 $69.95 12 39.5 100 KN130-5700 133.66 119.95

Specifi cations Blade L: Cap. Round: Flat Bar: Plates: 6" 3⁄8" 23⁄4 x 1⁄4" 3⁄32" 12 7⁄16 23⁄4 x 1⁄4 1⁄8

• Compound leverage for easy operation

• Long handle provides plenty of shearing torque

• Tool steel blades for long life

• Mounts directly to your workbench

Bench Top ShearsCuts Sheet Steel, Bars & Rods

As Low As

$6995

SAVEUP TO

15%

Dia. of Min. Wt. Reg. Sale Description Rolls Radius Lbs. Model # Price Price 24" x 20 Gauge 2" 1" 195 KN130-4501 $439.09 $395.00 50" x 16 Gauge 3 11⁄2 528 KN130-5501 997.43 859.00

• Maximum gauge capacity is applicable when using mild steel

• Using galvanized steel lowers maximum gauge capacity

Shown with Stand, sold separately.

Slip Rolls

Starting At

$395

1-YEAR LIMITED WARRANTY

Reg. Sale Description Model # Price Price Stand (56" x 17" x 24") KN130-5075 $219.98 $185.00

Stand for 50" x 16 Gauge Slip Roll

24-25 HD 14-09 MetFab.indd 2424-25 HD 14-09 MetFab.indd 24 8/14/14 9:26 AM8/14/14 9:26 AM

















Online at use-enco.com Metal Fabricating

SAVEOVER

10%On Notcher

4 Ton Hand Notcher

Notch Any Shearable Material• Heavy-duty blades

Specifi cations Mild Steel Cap.: 16 Gauge Max. Notch: 6" x 6" x 90° Stroke: 3⁄4" Stainless Cap.: 20 Gauge Table Size: 171⁄2 x 12"

Stand sold separately

StandModel # KN130-5115Low Price: $199.99



SAVE23%

50" x 16 Gauge Power Roll

Specifi cations Motor: 220v*, 3 ph., 3⁄4 hp Roll Speed: 22 rpm Capacity: 16 gauge Min. Radius: 1.5" Roll Dia.: 3" Weight: 880 lbs.* Can be rewired to 440v

1-YEARLIMITED

WARRANTYSale Price

Model # KN130-5510


SAVEUP TO

35%

Work Wt. Press Reg. Sale Ton Range Lbs. Style Model # Price Price 6 0-8" 68.2 H KN307-0121 $167.12 $159.00 30 0-34 286 HYC KN307-0126 929.06 599.95 45 0-31 693 HYC KN307-0125 1,119.40 849.95

Style HYC

• Use for aligning jobs, such as straightening crankshaft and connecting rod

• Great for press fi t, such as pressing in and out of shaft pin, gear and bushing

• Use for die press and punch press processing

HydraulicShop Presses

Style H

Starting At

$159

Pipe Bender12 Tons of Hydraulic Power

• Easy, lower cost way to bend pipe, conduit, tubing, I-beam and channel steel

• Bends up to 2" schedule 40 pipe or 4" I-beam• 110v AC, plugs into standard 20 amp outlet• 2500 psi • Wt.: 250 lbs.


$1,79999Regular Price: $2,241.90

SAVE$360On 6 Pc. Set

Accessories

Individual Pipe Dies

Bend Reg. Sale Size Radius Model # Price Price 1⁄2" 2.94" KN890-0435 $163.80 $105.00 3⁄4 3.68 KN890-0436 187.20 119.00 11⁄4 5.81 KN890-0438 271.80 179.00 11⁄2 6.65 KN890-0439 332.10 209.00 2 8.31 KN890-0440 403.20 255.00

6 Pc. 90° Pipe Die Set• Precision machined, cold drawn,

1018 steel for long life• Sizes 1⁄2-2" Model # KN890-0441Reg. Price: $1,289.70Sale Price: $929.00

SAVEOVER

15%

1-YEAR MANUFACTURER�S

WARRANTY

Sheet Metal Pan & Box Brakes

Wt. Reg. Sale Model Gauge Lbs. Model # Price Price Bench 22 280 KN130-5051 $529.13 $449.00 Bench 16 309 KN130-5061 716.54 709.00 Floor 12 1525 KN130-5234 1,998.98 1,899.00 Stand 64 KN130-5075 219.98 179.95

• Steel fi ngers can be removed or repositioned for custom metal work

• Model #KN130-5061 includes counterbalanceKN130-5051

As Low As

$449

SAVEUP TO

15% Specifi cations KN130-5051 KN130-5061 KN130-5234 Mild Steel Cap.: 22 Gauge 16 Gauge 12 Gauge Stainless Cap.: 26 Gauge 20 Gauge 16 Gauge Max. Beam Lift: 7⁄8" 11⁄4" 11⁄2" Max. Bend L: 481⁄4" 481⁄4" 481⁄4" Min. Reverse Bend: 5⁄16" 5⁄16" 1⁄2" Finger Width: 2, 3, 4" 2, 3, 4" 3, 4, 5" No. of Fingers: 16 16 10 Max. Box Depth: 3" 3" 4" Beam Adjustment: 0-1⁄8" 0-1⁄2" 0-1⁄2"

24-25 HD 14-09 MetFab.indd 2524-25 HD 14-09 MetFab.indd 25 8/14/14 9:26 AM8/14/14 9:26 AM























http://use-enco.com

http://use-enco.com


Shop the 2014 Enco Master CatalogEnd Mills

HSS 2 & 4 Flute Single End Mills30° Helix

2 Flute• Allows maximum space for chip evacuation• Use for milling slots, pockets and for plunge cutting in a wide variety of materials4 Flute• Designed for general-purpose work, including cam milling, die sinking and slot milling• Excellent for use in fi nishing operations• Multiple fl ute design allows for higher feed rates

2 Flute

4 Flute

As Low As

$929*7⁄8" shank dia.

Mill Shank 2 Flute Reg. Sale 4 Flute Reg. Sale Dia. Dia. LOC OAL Model # Price Price LOC OAL Model # Price Price 1⁄8" 3⁄8" 3⁄8" 25⁄16" KN337-4925 $10.58 $9.29 3⁄8" 25⁄16" KN337-5601 $10.80 $9.29 3⁄16 3⁄8 7⁄16 25⁄16 KN337-4931 10.58 9.29 1⁄2 23⁄8 KN337-5603 10.80 9.29 1⁄4 3⁄8 1⁄2 25⁄16 KN337-4940 10.58 9.29 5⁄8 21⁄2 KN337-5605 10.80 9.29 5⁄16 3⁄8 9⁄16 25⁄16 KN337-4949 10.58 9.29 3⁄4 21⁄2 KN337-5609 10.80 9.29 3⁄8 3⁄8 9⁄16 23⁄8 KN337-4958 10.58 9.29 3⁄4 21⁄2 KN337-5613 10.80 9.29 1⁄2 3⁄8 13⁄16 21⁄2 KN337-4971 14.86 13.29 1 211⁄16 KN337-5621 14.75 12.29 9⁄16 1⁄2 11⁄8 31⁄8 KN337-4978 18.57 17.09 13⁄8 33⁄8 KN337-5626 18.80 16.29 5⁄8 1⁄2 11⁄8 31⁄8 KN337-4981 20.84 19.09 13⁄8 33⁄8 KN337-5628 20.62 18.29 5⁄8 5⁄8 15⁄16 37⁄16 KN337-4982 21.63 19.89 15⁄8 33⁄4 KN337-5629 22.53 19.29 3⁄4 1⁄2 15⁄16 35⁄16 KN337-4991 24.43 22.59 15⁄8 35⁄8 KN337-5636 24.85 22.29 3⁄4 3⁄4 15⁄16 37⁄16 KN337-4994 24.43 22.59 15⁄8 33⁄4 KN337-5638 25.68 22.29 1 3⁄4 11⁄2 33⁄4 KN337-5019 34.13 31.59 17⁄8 41⁄8 KN337-5660* 36.60 32.29

SAVEUP TO

15%

SAVEUP TO

65%

• 4 fl ute end mills are excellent for deep slotting applications and also for use on aluminum and nonferrous materials• Helical gash (helix through the ball) for reduced cutting force, excellent fi nish and better chip control

4 Flute Centercutting Carbide End MillsSquare & Ball End • Uncoated & TiAlN Coated

Square End TiAIN Coated

As Low As

$695

• Shank Dia.: +.0000/-.0003"• Cutting Dia.: +.000/-.001"

Tolerances

Ball End TiAlN Coated

Square End Square End Ball End Ball End Mill Shank Flute Uncoated Mfr’s Sale TiAIN Coated Mfr’s Sale Uncoated Mfr’s Sale TiAIN Coated Mfr’s Sale Dia. Dia. L OAL Model # List Price Model # List Price Model # List Price Model # List Price 1⁄16" 1⁄8" 3⁄16" 11⁄2" KN328-0019 $16.29 $6.95 KN328-0029 $20.56 $8.09 KN328-0039 $18.76 $8.09 KN328-0049 $23.01 $9.89 1⁄8 1⁄8 1⁄2 11⁄2 KN328-0020 16.29 6.95 KN328-0030 20.56 8.09 KN328-0040 18.76 8.09 KN328-0050 23.01 9.89 3⁄16 3⁄16 5⁄8 2 KN328-0021 23.46 8.09 KN328-0031 28.90 10.95 KN328-0041 26.98 11.75 KN328-0051 32.40 113.39 1⁄4 1⁄4 3⁄4 21⁄2 KN328-0022 29.68 11.09 KN328-0032 40.82 13.95 KN328-0042 34.13 14.79 KN328-0052 45.27 19.39 5⁄16 5⁄16 13⁄16 21⁄2 KN328-0023 34.47 14.95 KN328-0033 51.09 18.95 KN328-0043 39.67 16.95 KN328-0053 56.27 24.29 3⁄8 3⁄8 1 21⁄2 KN328-0024 46.47 20.95 KN328-0034 63.09 24.95 KN328-0044 53.46 22.95 KN328-0054 70.06 29.95 1⁄2 1⁄2 1 3 KN328-0025 78.81 30.95 KN328-0035 99.92 34.95 KN328-0045 90.64 38.95 KN328-0055 111.74 47.95 5⁄8 5⁄8 11⁄4 31⁄2 KN328-0026 131.83 53.95 KN328-0036 162.45 63.95 KN328-0046 151.60 65.95 KN328-0056* 182.23 78.95 3⁄4 3⁄4 11⁄2 4 KN328-0027 193.13 74.95 KN328-0037 229.30 85.95 KN328-0047 222.09 96.95 KN328-0057 258.28 108.00 1 1 11⁄2 4 KN328-0028 357.68 139.95 KN328-0038 411.02 159.95 KN328-0048 411.35 175.00 KN328-0058 464.68 189.00*LOC: 7⁄8", OAL: 3"

M-42 Cobalt Single End Mills2 & 4 Flute

2 Flute: List 5204 Flute: List 54030° Helix

As Low As

$1229 SAVE59%

2 Flute 4 Flute

Mill Shank Flute 2 Flute Mfr’s Sale Flute 4 Flute Mfr’s Sale Dia. Dia. Length OAL Model # List Price Length OAL Model # List Price 1⁄8" 3⁄8" 3⁄8" 25⁄16" KN319-1934 $30.50 $12.29 3⁄8" 25⁄16" KN319-2239 $30.99 $12.29 3⁄16 3⁄8 7⁄16 25⁄16 KN319-1936 30.50 12.29 1⁄2 23⁄8 KN319-2241 30.99 12.29 1⁄4 3⁄8 1⁄2 25⁄16 KN319-1938 30.50 12.29 5⁄8 27⁄16 KN319-2243 30.99 12.29 5⁄16 3⁄8 9⁄16 25⁄16 KN319-1940 30.50 12.29 3⁄4 21⁄2 KN319-2245 30.99 12.29 3⁄8 3⁄8 9⁄16 25⁄16 KN319-1942 30.50 12.29 3⁄4 21⁄2 KN319-2247 30.99 12.29 1⁄2 1⁄2 1 3 KN319-1947 47.60 19.29 11⁄4 31⁄4 KN319-2252 42.61 17.29 5⁄8 1⁄2 11⁄8 31⁄8 KN319-1951 62.22 25.29 13⁄8 33⁄8 KN319-2256 58.81 23.29 5⁄8 5⁄8 15⁄16 37⁄16 KN319-1956 63.18 25.29 15⁄8 33⁄4 KN319-2261 63.81 25.29 3⁄4 1⁄2 15⁄16 35⁄16 KN319-1955 72.18 29.29 15⁄8 35⁄8 KN319-2260 70.31 28.29 3⁄4 3⁄4 15⁄16 39⁄16 KN319-1963 72.18 29.29 15⁄8 37⁄8 KN319-2270 72.92 29.29 7⁄8 3⁄4 11⁄2 33⁄4 KN319-1964 82.98 33.29 17⁄8 41⁄8 KN319-2271 101.39 41.29 1 3⁄4 11⁄2 33⁄4 KN319-1967 100.67 40.29 17⁄8 41⁄8 KN319-2274 103.60 41.29 1 1 15⁄8 41⁄8 KN319-1970 107.15 43.29 2 41⁄2 KN319-2278 109.57 44.29

26-27 HD 14-09 EM.indd 2626-27 HD 14-09 EM.indd 26 8/14/14 9:27 AM8/14/14 9:27 AM




























































































Online at use-enco.com End Mills

Starting At

$776

Mill Shank No. of Low Dia. Dia. LOC OAL Flutes Model # Price 1⁄8" 3⁄8" 3⁄8" 25⁄16" 4 KN320-2510 $7.76 3⁄16 3⁄8 1⁄2 23⁄8 4 KN320-2520 7.76 1⁄4 3⁄8 5⁄8 21⁄2 4 KN320-2530 7.76 5⁄16 3⁄8 3⁄4 21⁄2 4 KN320-2540 7.76 3⁄8 3⁄8 3⁄4 21⁄2 4 KN320-2550 7.76 7⁄16 3⁄8 1 211⁄16 4 KN320-2555 10.54 1⁄2 3⁄8 1 211⁄16 4 KN619-2607 10.60 1⁄2 1⁄2 11⁄4 31⁄4 4 KN320-2560 10.60 9⁄16 1⁄2 13⁄8 33⁄8 4 KN320-2565 12.40 5⁄8 1⁄2 13⁄8 33⁄8 4 KN619-2608 13.60 5⁄8 5⁄8 15⁄8 33⁄4 4 KN320-2570 14.88 11⁄16 1⁄2 15⁄8 35⁄8 4 KN319-2352 15.78 11⁄16 5⁄8 15⁄8 33⁄4 4 KN320-2575 16.53 3⁄4 1⁄2 15⁄8 35⁄8 4 KN619-2609 17.38 3⁄4 5⁄8 15⁄8 33⁄4 4 KN619-2610 16.29 3⁄4 3⁄4 15⁄8 37⁄8 4 KN320-2580 16.93 13⁄16 5⁄8 17⁄8 4 6 KN319-2353 21.88 7⁄8 5⁄8 17⁄8 4 6 KN319-2354 23.15 7⁄8 3⁄4 17⁄8 41⁄8 4 KN619-2611 22.31 7⁄8 7⁄8 17⁄8 41⁄8 4 KN320-2590 22.16 15⁄16 7⁄8 17⁄8 41⁄8 4 KN319-2355 36.83 1 5⁄8 17⁄8 4 4 KN319-2356 28.45 1 3⁄4 17⁄8 41⁄8 4 KN319-2357 24.16 1 1 2 41⁄2 4 KN619-2612 25.64 11⁄8 3⁄4 2 41⁄8 6 KN319-2358 37.52 11⁄8 1 2 41⁄2 6 KN320-2605 36.41 11⁄4 3⁄4 2 41⁄4 6 KN319-2359 49.49 11⁄4 11⁄4 2 41⁄2 6 KN320-2608 41.84

Multiple Flute HSS TiN Coated Single End Mills

TiN (Titanium Nitride)• Requires increase of 25 to 30% in machining

speeds vs. HSS• General-purpose use• Extends tool life• Used for aggressive machining of steels

Mill Shank Reg. Sale Dia. Dia. LOC OAL Model # Price Price2 Flute 1⁄8" 3⁄8" 3⁄8" 31⁄16" KN320-1010 $9.33 $6.99 5⁄32 3⁄8 7⁄16 31⁄8 KN320-1020 9.90 6.99 3⁄16 3⁄8 7⁄16 31⁄8 KN320-1030 9.33 6.99 1⁄4 3⁄8 1⁄2 31⁄8 KN320-1050 9.47 6.99 5⁄16 3⁄8 9⁄16 31⁄8 KN320-1070 9.33 6.99 3⁄8 3⁄8 9⁄16 31⁄8 KN320-1090 9.47 3.99 13⁄32 1⁄2 13⁄16 33⁄4 KN320-1100 15.03 6.79 7⁄16 1⁄2 13⁄16 33⁄4 KN320-1110 14.31 9.99 1⁄2 1⁄2 13⁄16 33⁄4 KN320-1130 14.31 9.99 5⁄8 5⁄8 11⁄8 41⁄2 KN320-1150 19.80 13.99 11⁄16 3⁄4 15⁄16 5 KN320-1160 25.00 10.99 3⁄4 3⁄4 15⁄16 5 KN320-1170 25.00 16.99 13⁄16 7⁄8 19⁄16 51⁄2 KN320-1180 31.48 14.99 11⁄8 3⁄4 15⁄8 37⁄8 KN320-0300 40.53 18.99 11⁄4 3⁄4 15⁄8 37⁄8 KN320-0330 44.50 18.99 4 Flute 1⁄8 3⁄8 3⁄8 31⁄16 KN320-1510 9.47 6.99 5⁄32 3⁄8 7⁄16 31⁄8 KN320-1520 9.90 6.99 3⁄16 3⁄8 1⁄2 31⁄4 KN320-1530 9.47 6.99 7⁄32 3⁄8 9⁄16 31⁄4 KN320-1540 9.90 6.99 1⁄4 3⁄8 5⁄8 33⁄8 KN320-1550 9.33 6.99 5⁄16 3⁄8 3⁄4 31⁄2 KN320-1570 9.33 6.99 7⁄16 1⁄2 1 41⁄8 KN320-1610 13.46 9.99 5⁄8 5⁄8 13⁄8 5 KN320-1650 19.51 13.99 3⁄4 3⁄4 15⁄8 55⁄8 KN320-1670 24.65 16.99

2 Flute• Centercutting• Good chip removal• Use for milling slots,

pockets and for plunge cutting in a wide variety of materials

4 Flute• Noncentercutting• 30° helix

2 & 4 Flute HSS Double End Mills

2 Flute

4 Flute

Starting At

$399SAVE

UP TO

57%

5 Pc. Fly-Tool Cutter Set

• Counterbalanced, hardened steel • Uses 3⁄16-1⁄2" standard tool bits

(not included)• 1⁄2 & 5⁄8" straight shankIncludes one of each: 3⁄4, 11⁄8, 13⁄8, 2, 21⁄2" head diameter.



SAVE17%

HSS Double End Mills2 Flute Centercutting & 4 Flute

2 Flute • Centercutting design with good chip removal capability • Use for milling slots, pockets and for plunge cutting in a

wide variety of materials4 Flute• Recommended for fi nishing operations in a wide range

of ferrous and nonferrous materials

As Low As

$1049 Mill Shank 2 Flute Reg. Sale 4 Flute Reg. Sale Dia. Dia. LOC OAL Model # Price Price LOC OAL Model # Price Price 1⁄8" 3⁄8" 3⁄8" 31⁄16" KN337-5212 $14.57 $10.49 3⁄8" 31⁄16" KN337-5465 $14.81 $11.09 3⁄16 3⁄8 7⁄16 31⁄8 KN337-5218 14.57 10.49 1⁄2 31⁄4 KN337-5471 14.81 11.09 1⁄4 3⁄8 1⁄2 31⁄8 KN337-5224 14.81 10.59 5⁄8 33⁄8 KN337-5477 14.57 10.89 5⁄16 3⁄8 9⁄16 31⁄8 KN337-5228 14.57 10.49 3⁄4 31⁄2 KN337-5481 14.57 10.89 3⁄8 3⁄8 9⁄16 31⁄8 KN337-5232 14.81 10.59 3⁄4 31⁄2 KN337-5485 14.57 10.89 7⁄16 1⁄2 13⁄16 33⁄4 KN337-5236 22.36 16.19 1 41⁄8 KN337-5489 21.03 15.69 1⁄2 1⁄2 13⁄16 33⁄4 KN337-5240 22.36 16.19 1 41⁄8 KN337-5493 21.03 15.69 5⁄8 5⁄8 11⁄8 41⁄2 KN337-9145 30.94 22.19 13⁄8 5 KN337-5497 30.49 22.79 3⁄4 3⁄4 15⁄16 5 KN337-5248 39.07 28.45 15⁄8 55⁄8 KN337-5501 38.51 28.79

SAVEUP TO

28%









































































http://use-enco.com

http://use-enco.com


Easy, Secure ShoppingEnd Mills

Mill Shank 2 Flute 4 Flute Reg. Sale Dia. Dia. LOC OAL Model # LOC OAL Model # Price Price 1⁄8" 3⁄8" 3⁄8" 25⁄16" KN320-0010 3⁄8" 25⁄16" KN320-0510 $6.77 $5.95 3⁄16 3⁄8 7⁄16 25⁄16 KN320-0020 1⁄2 23⁄8 KN320-0520 6.77 5.95 1⁄4 3⁄8 1⁄2 25⁄16 KN320-0030 5⁄8 21⁄2 KN320-0530 6.77 5.95 1⁄2 3⁄8 13⁄16 21⁄2 KN320-0090 1 211⁄16 KN320-0590 9.51 7.95 1⁄2 1⁄2 1 3 KN320-0100 11⁄4 31⁄4 KN320-0600 9.55 7.95 9⁄16 1⁄2 11⁄8 31⁄8 KN320-0110 13⁄8 33⁄8 KN320-0610 11.88 8.95 5⁄8 1⁄2 11⁄8 31⁄8 KN320-0120 13⁄8 33⁄8 KN320-0620 13.20 9.95 5⁄8 5⁄8 15⁄16 37⁄16 KN320-0130 15⁄8 33⁄4 KN320-0630 13.84 10.95 3⁄4 3⁄4 15⁄16 37⁄16 KN320-0180 15⁄8 33⁄4 KN320-0680 15.64 11.95 1 3⁄4 — — — 17⁄8 41⁄8 KN320-0780 23.42 16.95

2 & 4 Flute HSS End MillsFor general-purpose applications.2 Flute• Allows maximum space

for chip evacuation• Longer length of cut for

greater depth capacity4 Flute• General-purpose work,

including cam milling, die sinking and slot milling

• Excellent for use in fi nishing operations

• Allows for higher feed rates

As Low As

$595

SAVEUP TO

53%

Made from premium HSSE-V3 (3% Vanadium HSS) for increased toughness and tool life. With no cobalt content, these end mills are environmentally safe when reground.

2 Flute

HYPRO V® HSS End Mills2 & 4 Flute Centercutting

4 Flute

Mill Shank Flute Mfr’s Sale Dia. Dia. L OAL Model # List Price 2 Flute 1⁄8" 3⁄8" 3⁄8" 25⁄16" KN328-0079 $23.70 $11.29 3⁄16 3⁄8 7⁄16 25⁄16 KN328-0080 23.70 11.29 1⁄4 3⁄8 1⁄2 25⁄16 KN328-0081 23.70 11.29 5⁄16 3⁄8 9⁄16 25⁄16 KN328-0082 23.70 11.29 3⁄8 3⁄8 9⁄16 25⁄16 KN328-0096 23.70 11.29 7⁄16 3⁄8 13⁄16 21⁄2 KN328-0083 35.00 16.29 1⁄2 1⁄2 1 3 KN328-0084 36.98 17.29 5⁄8 5⁄8 15⁄16 37⁄16 KN328-0085 49.06 23.29 3⁄4 3⁄4 15⁄16 39⁄16 KN328-0086 56.07 26.29 4 Flute 1⁄8 3⁄8 3⁄8 25⁄16 KN328-0087 24.04 11.29 3⁄16 3⁄8 1⁄2 23⁄8 KN328-0088 24.04 11.29 1⁄4 3⁄8 5⁄8 27⁄16 KN328-0089 24.04 11.29 5⁄16 3⁄8 3⁄4 21⁄2 KN328-0090 24.04 11.29 3⁄8 3⁄8 3⁄4 21⁄2 KN328-0091 24.04 11.29 7⁄16 3⁄8 1 211⁄16 KN328-0092 32.35 15.29 5⁄8 5⁄8 15⁄8 33⁄4 KN328-0094 49.51 23.29 3⁄4 3⁄4 15⁄8 37⁄8 KN328-0095 56.66 27.29

• Shank Dia.: +.0000/-.0003"• Cutting Dia.: +.000/-.001"

Tolerances

As Low As

$1129

Mill Shank Flute No. of Low Dia. Dia. L OAL Flutes Model # Price 1⁄4" 3⁄8" 5⁄8" 27⁄16" 3 KN320-7310 $16.48 5⁄16 3⁄8 3⁄4 21⁄2 3 KN320-7320 18.12 3⁄8 3⁄8 3⁄4 21⁄2 4 KN320-7330 16.21 3⁄8 3⁄8 11⁄8 215⁄16 4 KN325-4113 15.95 1⁄2 1⁄2 2 4 4 KN320-1793 28.30 5⁄8 5⁄8 11⁄4 33⁄8 4 KN325-4115 28.80 5⁄8 5⁄8 15⁄8 33⁄4 4 KN320-7350 25.75 3⁄4 3⁄4 15⁄8 37⁄8 4 KN320-7360 29.58 1 1 3 51⁄2 5 KN307-3731 56.39 1 1 4 61⁄2 5 KN890-9643 60.35

Cobalt Roughing End MillsTiN Coated

Coarse Tooth • For heavy cuts, deep

slotting and side milling • Staggered tooth design

for min. chip load

Starting At

$1595

• General-purpose use• 30° Helix• Used for aggressive machining of steels• Requires increase of 25 to 30% in machining

speeds vs. HSS

Surface Treatment:TiN (Titanium Nitride)

Regular Length

2 Flute HSS TiN Coated Double End Mills

SAVEUP TO

20%

Starting At

$795

Mill Shank Flute Interstate Reg. Sale Hertel Low Dia. Dia. Length OAL Model # Price Price Model # Price 1⁄8" 3⁄8" 3⁄8" 31⁄8" — KN337-5280 $15.29 5⁄32 3⁄8 7⁄16 31⁄8 KN328-0798 $10.52 $8.95 — 3⁄16 3⁄8 7⁄16 31⁄8 KN326-0858 9.96 7.95 KN337-5282 15.29 7⁄32 3⁄8 1⁄2 31⁄8 KN328-0799 10.52 8.95 KN337-5283 16.16 1⁄4 3⁄8 1⁄2 31⁄8 KN326-0859 10.09 7.95 KN337-5284 15.50 9⁄32 3⁄8 9⁄16 31⁄8 — KN337-5285 16.28 5⁄16 3⁄8 9⁄16 31⁄8 KN326-0860 9.96 7.95 KN337-5286 15.29 11⁄32 3⁄8 9⁄16 31⁄8 KN319-2292 10.52 8.95 — 11⁄32 1⁄2 9⁄16 31⁄8 — KN337-5287 16.16 3⁄8 3⁄8 9⁄16 31⁄8 KN326-0861 10.09 7.95 KN337-5288 15.50 13⁄32 1⁄2 13⁄16 33⁄4 — KN337-5289 24.57 7⁄16 1⁄2 13⁄16 33⁄4 KN326-0862 15.20 12.95 KN337-5290 23.35 1⁄2 1⁄2 13⁄16 33⁄4 KN326-0863 15.20 12.95 KN337-9144 23.35 9⁄16 5⁄8 11⁄8 41⁄2 KN326-0864 21.55 17.95 KN337-5293 33.09 5⁄8 5⁄8 11⁄8 41⁄2 KN326-0865 21.05 17.95 KN337-5294 32.33 7⁄8 7⁄8 19⁄16 51⁄2 KN328-0800 33.45 27.95 KN337-5296 51.37 1 1 15⁄8 57⁄8 KN328-0801 41.15 34.95 KN337-5297 63.20

SAVEUP TO

23%

CentercuttingIncludes: 3⁄16, 1⁄4, 5⁄16, 3⁄8, 7⁄16, 1⁄2, 9⁄16, 5⁄8, 11⁄16 & 3⁄4"• Wood case

HSS End Mill Sets

No. of Reg. Sale Pcs. Style/Coating Model # Price Price 2 Flute 10 Single End HSS KN320-9000 $50.53 $39.99 4 Flute 10 Single End HSS KN320-9001 52.05 42.99 2 & 4 Flute 20 Single End HSS KN320-0000 105.09 79.95

Starting At

$3999
















































































Online at use-enco.com End Mills

As Low As

$377

SAVE30%

On 12+

Carbide-Tipped Tool Bits

Ind. AL AR Sale Price Ea. Size No. Model # Model # 1-11 12+ C2 1⁄4" 4 KN383-7140 KN383-7100 $5.47 $3.77 5⁄16 5 KN383-7144 KN383-7104 5.99 4.13 3⁄8 6 KN383-7148 KN383-7108 5.99 4.13 1⁄2 8 KN383-7156 KN383-7116 6.73 4.64 5⁄8 10 KN383-7160 KN383-7120 11.04 7.62 3⁄4 12 KN383-7164 KN383-7124 13.76 9.49 C5 1⁄4 4 KN383-7142 KN383-7102 5.47 3.77 5⁄16 5 KN383-7146 KN383-7106 5.99 4.13 3⁄8 6 KN383-7150 KN383-7110 5.99 4.13 1⁄2 8 KN383-7158 KN383-7118 6.73 4.64 5⁄8 10 KN383-7162 KN383-7122 11.04 7.62 3⁄4 12 KN383-7166 KN383-7126 13.76 9.49

• C2 grade for cast iron and nonferrous materials

• C5 grade for steel and steel alloys Style AL• Cuts from left to right • Left hand for turning to a square shoulder Style AR• Cuts from right to left • Right hand for turning to a square shoulder

Each Qty.: 12+

SAVEUP TO

23%

4 Flute Carbide Double End MillsCentercutting • Uncoated, TiN & TiAlN Coated

Stub & Regular Length • Higher rake and 30° helix angle

TiN Coated• General-purpose use • Extends tool life • Used for aggressive machining of steels• Provides increase of 25 to 30% in machining

speeds vs. uncoated tools

TiAIN Coated (Titanium Aluminum Nitride)• Recommended for diffi cult-to-machine materials• Used for aggressive machining of stainless steels,

high-alloy carbon steels, nickel-based, high-temperature alloys and titanium alloys

• Provides increase of 75 to 100% in machining speeds vs. uncoated tools

TiN Coated

TiAlN Coated

Uncoated

As Low As

$869 Mill Shank Uncoated Reg. Sale TiN Coated Reg. Sale TiAlN Coated Reg. Sale Dia. Dia. LOC OAL Model # Price Price Model # Price Price Model # Price Price 1⁄16" 1⁄8" 1⁄8" 11⁄2" KN322-8004 $9.43 $8.69 KN890-9641 $14.36 $11.49 KN308-0204 $11.39 $10.79 1⁄8 3⁄16 1⁄4 2 KN326-0049 12.16 10.19 KN891-7053 9.65 8.79 KN308-0205 10.15 9.59 1⁄8 3⁄8 3⁄8 31⁄16 KN325-2493 23.56 21.99 KN325-2561 30.34 24.99 KN619-1466 27.89 26.50 3⁄16 3⁄16 3⁄8 2 KN322-8012 12.06 10.29 KN891-7054 12.92 10.49 KN308-0206 13.60 12.49 1⁄4 1⁄4 1⁄2 21⁄2 KN322-8016 15.50 11.99 KN891-7055 18.60 14.99 KN308-0207 19.59 17.99 1⁄4 3⁄8 5⁄8 31⁄2 KN325-2497 23.56 22.99 KN325-2563 38.66 31.99 KN619-1470 38.38 37.99 5⁄16 5⁄16 1⁄2 21⁄2 KN322-8020 19.49 15.49 KN890-9642 24.38 19.99 KN619-1472 23.95 21.49 3⁄8 3⁄8 3⁄4 31⁄2 KN325-2499 30.20 26.99 KN325-2564 35.74 34.99 KN317-4670 37.62 32.99 1⁄2 1⁄2 5⁄8 3 KN322-8032 35.26 28.99 KN891-7057 53.24 40.99 KN308-0209 39.36 37.39

SAVEUP TO

19%

2 & 4 Flute Carbide Single End MillsUncoated, TiN Coated & TiAlN Coated

Regular Length • Centercutting • Solid micrograin carbide

Uncoated

TiN Coated

TiAIN Coated

Uncoated TiN Coated TiAIN Coated Mill Shank Flute 2 Flute 4 Flute Reg. Sale 2 Flute 4 Flute Reg. Sale 2 Flute 4 Flute Reg. Sale Dia. Dia. L OAL Model # Model # Price Price Model # Model # Price Price Model # Model # Price Price 1⁄8" 1⁄8" 1⁄2" 11⁄2" — KN322-6008 $5.12 $4.49 KN322-5108 KN322-6108 $6.55 $5.95 KN619-1436 KN308-0539 $6.63 $5.95 3⁄16 3⁄16 5⁄8 2 — — KN322-5112 KN322-6112 8.78 7.95 KN619-1437 KN308-0540 8.68 7.95 1⁄4 1⁄4 3⁄4 21⁄2 — — KN322-5116 KN322-6116 11.40 10.59 KN619-1435 KN308-0542 11.78 10.95 5⁄16 5⁄16 13⁄16 21⁄2 — KN322-6020 12.12 10.95 — KN322-6120 15.86 13.95 KN619-1439 KN308-0543 16.80 14.95 3⁄8 3⁄8 7⁄8 21⁄2 — — — — KN619-1443 KN308-0544 19.77 17.95 1⁄2 1⁄2 1 3 KN322-5032 KN322-6032 24.17 21.95 KN322-5132 KN322-6132 33.44 29.95 KN619-1434 KN308-0545 29.51 27.55 5⁄8 5⁄8 11⁄4 31⁄2 KN322-5040 KN322-6040 46.62 42.95 KN322-5140 KN322-6140 61.80 54.95 KN619-1440 KN308-0546 61.06 56.95 3⁄4 3⁄4 11⁄2 4 KN322-5048 KN322-6048 68.34 62.95 KN322-5148 KN322-6148 123.26 92.95 KN619-1438 KN308-0547 89.56 78.95

As Low As

$449

Long & Extra-Long Carbide End Mills4 Flute Centercutting • Uncoated & AlTiN Coated

AlTiN Coated• Recommended for diffi cult-to-machine materials• Used for aggressive machining of aircraft/aerospace materials,

stainless steels, high-alloy carbon steels, nickel-based, high-temperature alloys and titanium alloys

Uncoated

AlTiN Coated

As Low As

$1095

Mill Shank Uncoated Low AlTiN Coated Low Dia. Dia. LOC OAL Model # Price Model # Price

1⁄8" 1⁄8" 3⁄4" 21⁄4" KN323-5200 $10.95 KN619-1452 $15.95 1⁄8 1⁄8 1 3 KN891-4640 10.95 KN619-1460 13.95 3⁄16 3⁄16 3⁄4 21⁄4 KN323-5202 13.95 KN619-1453 15.95 3⁄16 3⁄16 11⁄8 3 KN891-4641 11.95 KN619-1461 15.95 1⁄4 1⁄4 11⁄8 3 KN323-5204 13.95 KN619-1451 21.95 1⁄4 1⁄4 11⁄2 4 KN891-4642 14.95 KN619-1459 20.95 3⁄8 3⁄8 11⁄8 3 KN323-5208 19.95 KN619-1454 27.95 3⁄8 3⁄8 13⁄4 4 KN891-4643 21.95 KN619-1462 31.95 1⁄2 1⁄2 2 4 KN323-5212 32.95 KN619-1450 41.95 1⁄2 1⁄2 3 6 KN891-4644 46.95 KN619-1458 60.95














































































































http://use-enco.com

http://use-enco.com


It’s IN STOCK and End Mills

6 Pc. HSS Single End Mill Set4 & 6 Flute



t

SAVE32%

• Ideal for Bridgeports • 3⁄4" shankIncludes: 3⁄4, 7⁄8, 1, 11⁄8, 11⁄4 & 11⁄2" and wooden stand.

*OAL: 33⁄4"

Coarse Tooth• Best for heavy cuts, deep slotting

and pocketing • Excellent in mild steels

Fine Tooth• For profi ling, shallow slots• For harder metals like stainless

steel, Inconel and mold steels

Mill Shank No. of Coarse Tooth Fine Tooth Reg. Sale Dia. Dia. LOC OAL Flutes Model # Model # Price Price

1⁄4" 3⁄8" 5⁄8" 27⁄16" 3 KN320-7110 KN320-7410 $15.71 $13.95 5⁄16 3⁄8 3⁄4 21⁄2 3 KN320-7120 KN320-7420 15.86 13.95 3⁄8 3⁄8 3⁄4 21⁄2 4 KN320-7130 KN320-7430 15.86 13.95 1⁄2 1⁄2 11⁄4 31⁄4 4 KN320-7140 KN320-7440 20.81 16.95 1⁄2 1⁄2 2 4 4 KN619-2438 KN321-1540 27.73 19.95 5⁄8 5⁄8 15⁄8 33⁄4 4 KN320-7150 KN325-4059 25.24 21.95 3⁄4 3⁄4 15⁄8 37⁄8 4 KN320-7170 KN320-7475* 28.97 25.95 3⁄4 3⁄4 3 51⁄4 4 KN321-1570 KN619-2439 37.93 29.95 7⁄8 3⁄4 17⁄8 41⁄8 5 KN320-7180 KN319-1717 41.57 33.95 1 1 2 41⁄2 5 KN320-7210 KN325-4065 43.60 38.95 1 1 3 51⁄2 5 KN619-2440 KN325-4025 55.82 49.95

Coarse Fine

M-42 Cobalt Roughing End MillsSAVE

UP TO

28%

Mill Shank Flute Low Dia. Dia. Length OAL Model # Price 2 Flute 1⁄16" 1⁄8" 1⁄8" 11⁄2" KN325-2458 $5.01 3⁄32 1⁄8 3⁄16 11⁄2 KN325-2459 4.75 1⁄8 1⁄8 1⁄4 11⁄2 KN323-5500 4.61 5⁄32 3⁄16 5⁄16 2 KN325-2460 6.47 1⁄4 1⁄4 1⁄2 2 KN323-5504 8.01 5⁄16 5⁄16 1⁄2 2 KN990-1607 10.95 3⁄8 3⁄8 5⁄8 2 KN323-5506 13.53 1⁄2 1⁄2 5⁄8 21⁄2 KN323-5508 22.31 5⁄8 5⁄8 3⁄4 3 KN323-5510 42.64 3⁄4 3⁄4 1 3 KN323-5512 61.31 4 Flute 1⁄16 1⁄8 1⁄8 11⁄2 KN325-2464 5.01 3⁄32 1⁄8 3⁄16 11⁄2 KN325-2465 4.75 1⁄8 1⁄8 1⁄4 11⁄2 KN323-5600 4.61 3⁄16 3⁄16 3⁄8 2 KN323-5602 6.13 1⁄4 1⁄4 1⁄2 2 KN323-5604 8.01 5⁄16 5⁄16 1⁄2 2 KN990-1609 10.95 3⁄8 3⁄8 5⁄8 2 KN323-5606 13.53 1⁄2 1⁄2 5⁄8 21⁄2 KN323-5608 22.31 5⁄8 5⁄8 3⁄4 3 KN323-5612 42.64 3⁄4 3⁄4 1 3 KN323-5614 61.31

2 & 4 Flute Carbide Single End Mills

• Stub length • Centercutting• Solid micrograin carbide

As Low As

$461

2 & 4 Flute Single End Mill SetsM-42 Cobalt, HSS & TiN Coated

As Low As

$2995

No. of Uncoated Reg. Sale TiN Coated Reg. Sale Description Includes Flutes Model # Price Price Model # Price PriceInterstateHSS – in Wood Case 10 Pc. Centercutting 3⁄16-3⁄4" 2 KN320-9000 $50.53 $35.95 KN320-0001 $63.17 $45.95 10 Pc. Centercutting 3⁄16-3⁄4 4 KN320-9001 52.05 39.95 KN320-0002 65.04 45.95 20 Pc. Centercutting 3⁄16-3⁄4 2; 4 KN320-0005 84.28 59.95 KN320-0000 105.09 79.95M-42 Cobalt – in Wood Stand 4 Pc. Noncentercutting 1⁄2, 5⁄8, 3⁄4, 1 4 KN321-9017 56.14 49.95 6 Pc. Noncentercutting 1⁄8, 3⁄16, 1⁄4, 5⁄16, 3⁄8, 1⁄2 4 KN321-9012 42.38 32.95 6 Pc. Centercutting 1⁄8, 3⁄16, 1⁄4, 5⁄16, 3⁄8, 1⁄2 2 KN327-1676 41.45 29.95 8 Pc. Noncentercutting 1⁄2, 5⁄8, 3⁄4, 1 2; 4 KN321-9015 111.28 95.95 10 Pc. Centercutting 3⁄16-3⁄4 2 KN321-0900 73.52 69.95 10 Pc. Centercutting 3⁄16-3⁄4 4 KN321-0901 73.52 69.95 12 Pc. Centercutting 1⁄8, 3⁄16, 1⁄4, 5⁄16, 3⁄8, 1⁄2 2; 4 KN321-9010 66.84 59.95 20 Pc. Centercutting 3⁄16-3⁄4 2; 4 KN321-0001 166.13 149.95ClevelandCobalt – in Wood Stand 6 Pc. Centercutting 1⁄8, 3⁄16, 1⁄4, 5⁄16, 3⁄8, 1⁄2 2 KN317-0827 82.80 59.95 KN317-0828 96.26 69.95 6 Pc. Centercutting 1⁄8, 3⁄16, 1⁄4, 5⁄16, 3⁄8, 1⁄2 4 KN317-0829 82.80 61.95 KN317-0830 96.26 69.95

• 1⁄2" straight shank

HSS Woodruff Keyseat CuttersStraight Tooth

Nom. Face Old American Mfr’s Sale Dia. W OAL Std. Std. Model # List Price 1⁄4" 1⁄16" 21⁄16" 201 202 KN619-2604 $26.01 $19.95 3⁄8 3⁄32 23⁄32 212 303 KN367-2540 26.01 19.95 3⁄8 1⁄8 21⁄8 213 403 KN367-2550 26.01 19.95 1⁄2 1⁄16 21⁄16 1 204 KN367-2610 26.01 19.95 1⁄2 1⁄8 21⁄8 3 404 KN367-2640 26.01 19.95 5⁄8 3⁄32 23⁄32 4 305 KN367-2630 26.26 19.95 5⁄8 1⁄8 21⁄8 5 405 KN367-2650 26.26 19.95 5⁄8 3⁄16 23⁄16 61 605 KN367-2680 26.26 19.95 3⁄4 1⁄8 21⁄8 7 406 KN367-2660 27.53 20.95 3⁄4 1⁄4 21⁄4 91 806 KN367-2700 27.53 20.95 3⁄4 3⁄16 23⁄16 9 606 KN367-2720 27.53 20.95 1 3⁄16 23⁄16 13 608 KN367-2750 32.87 24.95 1 1⁄4 21⁄4 15 808 KN367-2800 33.18 24.95

SAVE23%

30-31 HD 14-09 EM_SBB.indd 3030-31 HD 14-09 EM_SBB.indd 30 8/14/14 9:36 AM8/14/14 9:36 AM












































































READY TO SHIP! Saws/Broaches/Burs

SAVEUP TO

43%

Carbide 1⁄4" Shank BursSingle & Double Cut• Hardened steel shanks

except 1⁄4" and 3⁄16" dia., which are solid carbide

Ind. Cutter Single Cut Double Cut Reg. Sale No. Dia. L Model # Model # Price Price A. Cylindrical Ball Nose Burs SC-1 1⁄4" 5⁄8" KN317-0267 KN317-0276 $11.97 $7.49 SC-3 3⁄8 3⁄4 KN317-0269 KN317-0278 16.11 10.79 SC-5 1⁄2 1 KN317-0271 KN317-0280 25.62 16.79 B. Cylindrical Burs SA-1 1⁄4 5⁄8 KN317-0210 KN317-0220 10.28 6.49 SA-3 3⁄8 3⁄4 KN317-0212 KN317-0222 14.74 9.49 SA-5 1⁄2 1 KN317-0214 KN317-0224 22.61 14.79 C. Cylindrical End Cut Burs SB-1 1⁄4 5⁄8 KN317-0231 KN317-0237 11.24 7.29 SB-5 1⁄2 1 KN317-0234 KN317-0241 25.57 16.49 D. 14° Included Angle Burs SL-1 1⁄4 5⁄8 KN317-0326 KN317-0332 13.17 8.39 SL-3 3⁄8 11⁄16 KN317-0328 KN317-0334 20.54 13.99 SL-4 1⁄2 11⁄8 KN317-0329 KN317-0335 24.84 13.99 E. Ball Shape Burs SD-14 3⁄16 1⁄8 KN317-0245 KN317-0255 11.12 7.29 SD-1 1⁄4 7⁄32 KN317-0246 KN317-0256 11.12 7.29 SD-3 3⁄8 5⁄16 KN317-0248 KN317-0258 13.49 8.49 SD-5 1⁄2 7⁄16 KN317-0250 — 18.34 11.99

A

B

C

D

E

Starting At

$649 TPI/ Mfr’s Sale L W Thick. Set Model # List Price 5' 41⁄2" 1⁄2" 0.025" 6/S KN990-0347 $14.66 $9.99 5' 41⁄2" 1⁄2 0.025 10/S KN990-0348 14.66 9.99 5' 41⁄2" 1⁄2 0.025 14/S KN990-0349 14.66 9.99 5' 41⁄2" 1⁄2 0.025 18/W KN990-0351 14.66 9.99 5' 41⁄2" 1⁄2 0.025 24/W KN990-0352 14.66 9.99 7' 9" 3⁄4 0.032 6/S KN990-0381 22.18 13.99 7' 9" 3⁄4 0.032 10/S KN990-0382 22.18 13.99 8' 11" 3⁄4 0.032 10/S KN990-0414 23.89 14.99 9' 3⁄4 0.032 10/S KN990-0418 23.89 14.99 9' 71⁄2" 3⁄4 0.032 10/S KN990-0424 25.60 15.99 9' 71⁄2" 3⁄4 0.032 14/S KN990-0425 25.60 15.99 10' 101⁄2" 3⁄4 0.032 8/S KN990-0443 27.31 16.99 11' 1 0.035 6/S KN990-0452 31.05 19.99 11' 1 0.035 10/S KN990-0454 31.05 19.99 11' 1 0.035 14/S KN990-0455 31.05 19.99 11' 6" 3⁄4 0.032 10/S KN990-0460 28.17 17.99 11' 6" 3⁄4 0.032 14/S KN990-0461 28.17 17.99 11' 6" 1 0.035 10/S KN990-0465 32.08 20.99 12' 6" 1⁄2 0.025 6/S KN990-0471 23.13 14.99 12' 6" 1⁄2 0.025 14/S KN990-0478 23.13 14.99 12' 6" 1 0.035 6/S KN990-0483 34.13 21.99S=Straight Tooth, W=Wavy Tooth

Flex-Back Bandsaw BladesPre-Welded

• Made from carbon steel with a fl exible back for general-purpose cutting

• Teeth precisely hardened• Absorbs stresses on

contour cutting• Suitable for wood and wood

composites, plastics, most nonferrous foundry-type metals and mild steel

SAVEUP TO

37%Starting At

$999

Bi-Metal Hole Saw Kits

• Master Cobalt® bi-metal design uses an electron beam to weld M3 high-speed steel cutting edge to a tough steel backer. 11⁄2" cutting depth

Mechanic’s Kit— 7⁄8, 1, 11⁄8, 11⁄4 & 11⁄2" saws, arbor to fi t 3⁄8" chuck size. Maintenance Kit— 3⁄4, 7⁄8, 11⁄8, 13⁄8, 11⁄2, 13⁄4, 2, 21⁄4 & 21⁄2" saws, 3 arbors for 1⁄4" and 1⁄2" chuck size, and 1⁄2" pin drive chuck size, 12" extension.Electrician’s Kit— 7⁄8, 11⁄8, 13⁄8, 13⁄4, 2 & 21⁄2" saws, 2 arbors for 1⁄2" chuck size. Plumber’s Kit — 3⁄4, 7⁄8, 11⁄8, 11⁄2, 13⁄4 & 21⁄4" saws, 2 arbors for 1⁄2" standard & pin chuck size.Industrial Kit— 3⁄4, 7⁄8, 11⁄8, 13⁄8, 11⁄2, 13⁄4, 2, 21⁄4, 21⁄2, 3, 31⁄4, 35⁄8, 33⁄4, 41⁄4 & 41⁄2" saws, 3 arbors for 1⁄4" & 1⁄2" chuck size, 12" extension. *Steel carrying case

Reg. Sale Kit Model # Price Price Mechanic’s KN990-0589 $59.89 $29.95 Maintenance KN371-4095 165.64 79.95 Electrician’s KN990-0591 120.99 59.95 Plumber’s KN990-0592 116.30 51.95 Industrial KN990-0593* 345.39 159.95

Assembled from superior bi-metal hole saws, together with arbors.

Starting At

$2995

High-density polyethylene case included

SAVEUP TO

30%

HSS Keyway Broach Sets

• Sets include all necessary shims No. 00 Precision SetCuts 15 different keyways for small keyways and bores. Consists of: 3 broaches: A—1⁄16, 3⁄32, 1⁄8"; 5 collared bushings: A—1⁄4, 5⁄16, 3⁄8, 7⁄16 and 1⁄2"No. 10 Standard SetCuts 18 different keyways. Consists of: 4 broaches: 1⁄8 B, 3⁄16 B, 1⁄4 C, 3⁄8" C; 9 collared bushings: B—1⁄2, 5⁄8, 3⁄4, 7⁄8" and C—1, 11⁄8, 11⁄4, 13⁄8 and 11⁄2"No. 10-10A Combination Set Cuts 36 different keyways. Consists of: 4 broaches:B—1⁄8 and 3⁄16", C—1⁄4 and 3⁄8"; 18 collared bushings:B—1⁄2, 9⁄16, 5⁄8, 11⁄16, 3⁄4, 13⁄16 and 7⁄8"; C—15⁄16, 1, 11⁄16,11⁄8, 13⁄16, 11⁄4, 15⁄16, 13⁄8, 17⁄16, 11⁄2 and 19⁄16" No. 20 Combination Set Cuts 47 different keyways. Consists of: 5 broaches: B—1⁄8 and 3⁄16", C—1⁄4, 5⁄16 and 3⁄8"; 18 collared bushings:B—1⁄2, 9⁄16, 5⁄8, 11⁄16, 3⁄4, 13⁄16 and 7⁄8"; C—15⁄16, 1, 11⁄16,11⁄8, 13⁄16, 11⁄4, 15⁄16, 13⁄8, 17⁄16, 11⁄2 and 1 9⁄16"

duMONT

Ind. Import Reg. Sale duMONT Mfr’s Sale No. Model # Price Price Model # List Price 00 KN307-2793 $96.10 $78.99 KN395-0100 $200.00 $159.00 10 KN307-2794 171.46 118.99 KN395-0200 350.00 278.00 10-10A KN307-2795 220.61 178.99 KN395-0300 450.00 356.00 20 KN307-2796 253.37 198.99 KN422-1484 518.00 408.00

As Low As

$7899Import

30-31 HD 14-09 EM_SBB.indd 3130-31 HD 14-09 EM_SBB.indd 31 8/14/14 9:36 AM8/14/14 9:36 AM
































































http://use-enco.com


Over 90,000 PRODUCTS Available Drills/Reamers

Carbide 135° Split Point Screw Machine DrillsSlow Spiral

• Carbide provides superior wear resistance• Can withstand the highest cutting temperatures

in a higher degree of dimensional accuracy• For use in stainless steels, nickel-based and

titanium alloys, aluminum, cast iron, bronze and magnesium

• 135° self-centering split point prevents “walking”

Flute Low Size L OAL Model # Price 1⁄16" 5⁄8" 15⁄8" KN619-0842 $9.49 5⁄64 11⁄16 111⁄16 KN619-0843 9.99 3⁄32 3⁄4 13⁄4 KN619-0844 10.19 7⁄64 13⁄16 113⁄16 KN619-0845 11.99 1⁄8 7⁄8 17⁄8 KN619-0846 12.19 9⁄64 15⁄16 115⁄16 KN619-0847 14.49 5⁄32 1 21⁄16 KN619-0848 15.29 11⁄64 11⁄16 21⁄8 KN619-0849 19.99 3⁄16 11⁄8 23⁄16 KN619-0850 17.99 13⁄64 13⁄16 21⁄4 KN619-0851 23.49 7⁄32 11⁄4 23⁄8 KN619-0852 22.99 15⁄64 15⁄16 27⁄16 KN327-0945 28.99 1⁄4 13⁄8 21⁄2 KN619-0853 25.99 17⁄64 17⁄16 25⁄8 KN619-0854 36.99 9⁄32 11⁄2 211⁄16 KN317-5437 37.99 19⁄64 19⁄16 23⁄4 KN619-0855 41.99 5⁄16 15⁄8 213⁄16 KN619-0856 37.99 21⁄64 111⁄16 215⁄16 KN327-0946 44.49 11⁄32 111⁄16 3 KN619-0857 52.99 23⁄64 13⁄4 31⁄16 KN317-5438 53.99 3⁄8 113⁄16 31⁄8 KN619-0858 59.99 25⁄64 17⁄8 31⁄4 KN327-0947 65.99 13⁄32 115⁄16 35⁄16 KN317-5439 67.99 7⁄16 21⁄16 37⁄16 KN619-0859 69.99 29⁄64 21⁄8 39⁄16 KN327-0949 89.99 1⁄2 21⁄4 33⁄4 KN619-0860 94.99

SAVEOVER

50%Off Mfr’s List

135° Split Point 6" Aircraft Extension DrillsCobaltUsed to drill normal depth holes in hard-to-reach places, such as in airframe work and pulley hubs.• Cobalt provides better wear

resistance in hardness and toughness compared to HSS

• For use in high-tensile alloys, titanium, cast iron, Inconel and high-nickel stainless steels

Flute Mfr’s Sale Size L Model # List Price 1⁄16" 7⁄8" KN317-8694 $10.65 $4.59 5⁄64 1 KN317-8695 10.75 4.59 3⁄32 11⁄4 KN317-8696 8.32 3.59 1⁄8 15⁄8 KN317-8698 8.96 3.59 5⁄32 2 KN317-8700 10.50 4.59 3⁄16 25⁄16 KN317-8702 11.40 4.59 13⁄64 27⁄16 KN317-8703 14.50 6.59 7⁄32 21⁄2 KN317-8704 14.35 6.59 1⁄4 23⁄4 KN317-8706 15.45 6.59

SAVEUP TO

67%

Size Range Sizes No. of Reg. Sale Min. Max. Included Pcs. Model # Price Price 1⁄4" 3⁄8" 8/A to 5/A 4 KN890-8857 $58.96 $18.99 3⁄8 15⁄32 4/A to 2/A 3 KN890-8858 44.76 15.99 3⁄8 27⁄32 4/A to M 16 KN890-9542 348.40 179.99 15⁄32 11⁄16 A to H 8 KN890-8859 125.59 65.99 15⁄32 11⁄2 A to K 11 KN334-1000 220.61 109.99

HSS Adjustable Blade Reamer Sets

• Supplied in a wooden case

Starting At

$1599 Flute Reg. Sale Size Length OAL Model # Price Price 5⁄64" 3⁄8" 19⁄32" KN327-1630 $26.16 $21.95 1⁄8 1⁄2 11⁄2 KN327-1628 29.47 24.95 3⁄16 3⁄4 2 KN327-1629 40.39 32.95 1⁄4 1 11⁄2 KN327-1627 52.40 39.95 7 Pc. Set KN317-6192 148.52 109.95

• Saves expensive parts • Advanced point geometry• Tough micrograin

carbide easily cuts through tool steel

7 Pc. Set includes:• 4 drill sizes:

5⁄64, 1⁄8, 3⁄16 & 1⁄4" • Pin vise with 2 picks • For tap sizes

#4 to 1⁄2" and M3 to M12

Carbide Tap Removing Drills & Drill Set

7 Pc. Set Only

$10995

SAVEUP TO

26%

135° Split Point Cobalt DrillsJobber & Screw Machine

Screw Machine DrillJobber Drill

Jobber Drills• 135° self-centering split point prevents “walking”Screw Machine Drills• Shorter lengths compared to jobber drills (also known as stub drills)Cobalt• When used in applications that generate higher temperatures, cobalt retains its

strength and hardness while offering more abrasion resistance than HSS• For use in alloy steel, malleable cast iron, titanium and nickel alloys

*Sold in pkg. qty. of 12 only

Flute Jobber Drills Mfr’s Sale Flute Screw Machine Drills Mfr’s Sale Dia. L OAL Model # List Price L OAL Model # List Price 1⁄16" 7⁄8" 17⁄8" KN317-8366* $3.80 $1.76 5⁄8" 15⁄8" KN319-0643* $3.34 $1.55 5⁄64 1 2 KN317-8367* 3.80 1.76 11⁄16 111⁄16 KN319-0644* 3.36 1.56 3⁄32 11⁄4 21⁄4 KN317-8368* 3.80 1.76 3⁄4 13⁄4 KN319-0645* 3.34 1.55 7⁄64 11⁄2 25⁄8 KN317-8369 4.00 1.86 13⁄16 113⁄16 KN319-0646 3.79 1.75 1⁄8 15⁄8 23⁄4 KN317-8370 4.84 2.25 7⁄8 17⁄8 KN319-0647 4.34 2.02 9⁄64 13⁄4 27⁄8 KN317-8371 4.89 2.27 15⁄16 115⁄16 KN319-0648 4.39 2.04 5⁄32 2 31⁄8 KN317-8372 5.48 2.54 1 21⁄16 KN319-0649 4.78 2.22 11⁄64 21⁄8 31⁄4 KN317-8373 5.79 2.68 11⁄16 21⁄8 KN319-0650 5.42 2.51 3⁄16 25⁄16 31⁄2 KN317-8374 6.44 2.99 11⁄8 23⁄16 KN319-0651 6.34 2.94 13⁄64 27⁄16 35⁄8 KN317-8375 7.76 3.60 13⁄16 21⁄4 KN319-0652 7.24 3.36 7⁄32 21⁄2 33⁄4 KN317-8376 8.52 3.95 11⁄4 23⁄8 KN319-0653 7.98 3.70 15⁄64 25⁄8 37⁄8 KN317-8377 9.04 4.20 15⁄16 27⁄16 KN319-0654 8.85 4.11 1⁄4 23⁄4 4 KN317-8378 9.56 4.44 13⁄8 21⁄2 KN319-0655 8.87 4.12 17⁄64 27⁄8 41⁄8 KN317-8379 10.90 5.07 17⁄16 25⁄8 KN319-0656 10.40 4.84 9⁄32 215⁄16 41⁄4 KN317-8380 11.45 5.32 11⁄2 211⁄16 KN319-0657 11.00 5.12 5⁄16 33⁄16 41⁄2 KN317-8382 14.90 6.92 15⁄8 213⁄16 KN319-0659 13.70 6.35 3⁄8 35⁄8 5 KN317-8386 20.55 9.55 113⁄16 31⁄8 KN319-0663 18.95 8.77 13⁄32 37⁄8 51⁄4 KN317-8388 24.55 11.40 115⁄16 35⁄16 KN319-0665 22.40 10.40 7⁄16 41⁄16 51⁄2 KN317-8390 27.75 12.90 21⁄16 37⁄16 KN319-0667 25.45 11.80 1⁄2 41⁄2 6 KN317-8394 34.60 16.07 21⁄4 33⁄4 KN319-0671 30.45 14.15

SAVE53%

As Low As

$155

32-33 HD 14-09 DRC.indd 3232-33 HD 14-09 DRC.indd 32 8/14/14 9:39 AM8/14/14 9:39 AM























































































Online at use-enco.com Drills/Countersinks

Special 3-fl at shank eliminates slippage in drill chuck; provides a positive grip in cordless, keyless and conventional power tools.• 135° split point for quick penetration

and reduced “walking”• Ideal for drilling in a wide variety of

materials, including high-carbon steel, stainless steel, woods and plastics

• Bronze/black-oxide fi nish • Metal index case

Trinado™

HSS Drill SetsNo-Slip Design

No. of Mfr’s Sale Pcs. Sizes Model # List Price 13 1⁄16-1⁄4" x 64ths KN240-6982 $40.33 $18.49 15 1⁄16-1⁄2 x 32nds KN240-6983 112.41 51.99 21 1⁄16-3⁄8 x 64ths KN240-6984 100.87 46.49 29 1⁄16-1⁄2 x 64ths KN240-6985 209.91 96.99

SAVEUP TO

54%Starting At

$1849

SAVEUP TO

62% Drill Mfr’s Sale Material Point Grade Model # List Price 26 Pc. Drill Sets, A-Z HSS Bright 118° General-Purpose KN317-9913 $288.00 $131.00 Cobalt 135 Split Heavy-Duty KN317-9918 478.00 217.00 29 Pc. Drill Sets, 1⁄16-1⁄2" x 64ths HSS Bright 118 General-Purpose KN317-9912 256.00 99.95 HSS Black Oxide 135 Split Heavy-Duty KN317-9915 254.00 95.95 Cobalt 135 Split Heavy-Duty KN317-9919 422.00 159.95 60 Pc. Drill Sets, #60-1 Wire Gage HSS Bright 118 General-Purpose KN317-9914 224.00 99.00 HSS Black Oxide 135 Split Heavy-Duty KN317-9916 217.00 85.95 Cobalt 135 Split Heavy-Duty KN317-9917 326.00 148.00

Screw Machine Length Drill Sets• 118° point for quick penetration • 135° self-centering split point prevents “walking” • Case included

29 Pc. Black Oxide Set

As Low As

$8595

HSS 118° Jobber DrillsBright Finish and Black Oxide Treated

• Improves chip fl ow in low- carbon steels and soft nonferrous materials

Black Oxide• Reduces the amount of

chip welding • Increases abrasion resistance

SAVE25%

On Qty.: 12+

As Low As

98¢Each 12+

Flute Bright Finish Price Each Black Oxide Price Each Size Length OAL Model # 1-11 12+ Model # 1-11 12+ 1⁄16" 7⁄8" 17⁄8" KN317-7408 $1.36 $1.02 KN317-7364 $1.31 $ .98 3⁄32 11⁄4 21⁄4 KN317-7410 1.37 1.03 KN317-7366 1.37 1.03 7⁄64 11⁄2 25⁄8 KN317-7411 1.38 1.03 KN317-7367 1.38 1.03 1⁄8 15⁄8 23⁄4 KN317-7412 1.40 1.05 KN317-7368 1.40 1.05 9⁄64 13⁄4 27⁄8 KN317-7413 1.51 1.13 KN317-7369 1.51 1.13 5⁄32 2 31⁄8 KN317-7414 1.76 1.32 KN317-7370 1.76 1.32 3⁄16 25⁄16 31⁄2 KN317-7416 2.03 1.52 KN317-7372 2.03 1.52 13⁄64 27⁄16 35⁄8 KN317-7417 2.24 1.68 KN317-7373 2.24 1.68 1⁄4 23⁄4 4 KN317-7420 2.64 1.98 KN317-7376 2.72 2.04 17⁄64 27⁄8 41⁄8 KN317-7421 3.09 2.32 KN317-7377 3.09 2.32 9⁄32 215⁄16 41⁄4 KN317-7422 3.29 2.47 KN317-7378 3.29 2.47 5⁄16 33⁄16 41⁄2 KN317-7424 4.10 3.07 KN317-7380 4.10 3.07 3⁄8 35⁄8 5 KN317-7428 6.01 4.51 KN317-7384 6.01 4.51 1⁄2 41⁄2 6 KN317-7436 10.80 8.10 KN317-7392 10.82 8.11

HSS & Cobalt Combined Drills & Countersinks60°, 82° & 90°

KEO Interstate Body Drill 60° Reg. Sale 82° HSS 90° HSS Reg. Sale Size Dia. L OAL Model # Price Price Model # Model # Price PriceHSS #1 1⁄8" 3⁄64" 11⁄4" KN369-1836 $6.00 $4.20 KN369-1764 KN369-1780 $5.36 $3.75 #2 3⁄16 5⁄64 17⁄8 KN369-1841 6.28 4.39 KN369-1766 KN369-1782 5.48 3.83 #3 1⁄4 7⁄64 2 KN369-1846 6.53 4.57 KN369-1768 KN369-1784 5.65 3.95 #4 5⁄16 1⁄8 21⁄8 KN369-1851 6.74 4.71 KN369-1770 KN369-1786 5.87 4.10 #5 7⁄16 3⁄16 23⁄4 KN369-1856 9.58 6.70 KN369-1772 KN369-1788 9.00 6.30 #6 1⁄2 7⁄32 3 KN369-1861 16.02 11.21 KN369-1774 KN369-1790 13.66 9.56 #7 5⁄8 1⁄4 31⁄4 KN369-1866 24.36 17.05 KN369-1776 KN369-1792 18.68 13.07 #8 3⁄4 5⁄16 31⁄2 KN369-1871 33.44 23.40 KN369-1778 KN369-1794 26.93 18.49Cobalt #2 3⁄16 5⁄64 17⁄8 — KN369-1732 KN369-1750 7.52 5.26 #3 1⁄4 7⁄64 2 — KN369-1734 KN369-1752 7.77 5.43 #4 5⁄16 1⁄8 21⁄8 — KN369-1736 KN369-1754 7.87 5.50 #5 7⁄16 3⁄16 23⁄4 — KN369-1738 KN369-1756 11.63 8.14 #6 1⁄2 7⁄32 3 — KN369-1740 KN369-1758 18.52 12.96 #7 5⁄8 1⁄4 31⁄4 — KN369-1742 KN369-1760 25.45 17.81 #8 3⁄4 5⁄16 31⁄2 — KN369-1744 KN369-1762 36.46 25.00

SAVE30%

SAVEOVER

35%

HSS 6 Flute Chatterless Countersinks82 & 90°

Good wear resistance in mild steels and nonferrous materials such as plastics, aluminum, copper, brass, bronze, rubber and wood.• Blackened surface treatment prolongs tool

life and prevents galling• Can be used on all types of machine setups• Provides the highest feed rates of all

countersinks• Provides a longer life as cutting load is

distributed across more edges Shank 82° 90° Mfr’s Sale Size Dia. OAL Model # Model # List Price 1⁄4" 1⁄4" 2" KN308-0423 KN308-0432 $9.82 $5.89 3⁄8 1⁄4 2 KN308-0424 KN308-0433 12.15 7.29 1⁄2 3⁄8 2 KN308-0425 KN308-0434 15.01 9.19 5⁄8 3⁄8 21⁄4 KN308-0426 KN308-0435 21.67 12.99 3⁄4 1⁄2 23⁄4 KN308-0427 KN308-0436 29.71 17.99 1 1⁄2 23⁄4 KN308-0428 KN308-0437 45.40 27.99

As Low As

$589




























































































http://use-enco.com

http://use-enco.com


The Lowest Prices in the Drills/Countersinks

Drill Sets

KN337-2218

As Low As

$59 No. of Low Description Pcs. Material Sizes Model # Price Silver & Deming - 1⁄2" Shank 8 HSS 9⁄16 - 1" x 16ths KN337-2847 $128.95 Silver & Deming - 1⁄2" Shank 33 HSS 1⁄2 - 1 x 64ths KN337-2853 567.00 Screw Machine Length - 118° Point 29 HSS-Bright 1⁄16 - 1⁄2 x 64ths KN337-2804 64.95 Screw Machine Length - 135° Split Point 60 HSS-Black Oxide #60-1 KN337-2812 59.00 Screw Machine Length - 135° Split Point 60 Cobalt-Bright #60-1 KN337-2814 93.00 Screw Machine Length - 135° Split 115 Cobalt 1⁄16 - 1⁄2, 1-60, A-Z KN337-2218 410.00 Jobber Length - 118° Point 7 Carbide 1⁄8 - 1⁄2 KN404-0651* 209.00 Jobber Length - 118° Point 7 Carbide TiN Coated 1⁄8 - 1⁄2 KN404-0652* 236.00 Jobber Length - 118° Point 25 HSS-Black Oxide 1 - 13 x 0.5mm KN337-2206 69.95*Case not included

SAVEUP TO

43%

Shank Included Angle Model # Low Size Dia. OAL 82° 90° Price 1⁄4" 1⁄4" 11⁄2" KN369-0120 KN369-0121 $4.13 5⁄16 1⁄4 11⁄2 KN369-0130 KN369-0131 4.34 3⁄8 1⁄4 13⁄4 KN369-0140 KN369-0141 4.73 1⁄2 1⁄4 2 KN369-0150 KN369-0151 5.79 5⁄8 1⁄2 21⁄4 KN369-0160 KN369-0161 7.75 3⁄4 1⁄2 23⁄4 KN369-0170 KN369-0171 11.32 7⁄8 1⁄2 23⁄4 KN369-0180 KN369-0181 17.61 1 1⁄2 23⁄4 KN369-0190 KN369-0191 18.87 11⁄2 3⁄4 27⁄8 KN369-0210 KN369-0211 49.94 2 3⁄4 33⁄4 KN369-0220 KN369-0221 89.08

Designed to perform a variety of jobs including chamfering, deburring and countersinking.• Single fl ute countersinks center better than

multi-fl ute tools• Can be used in hand-held applications and

nonrigid machine setups• HSS provides good wear resistance in mild

steels and nonferrous materials such as plastics, aluminum, copper, brass, bronze, rubber and wood

HSS Single Flute Countersinks82 & 90°

6 Flute Carbide Countersinks82 & 90° Countersink Angles

Series 78• Designed to perform a variety of jobs including chamfering,

deburring and countersinking• Provides the highest feed rates of all countersinks• Provides longer tool life as cutting load is distributed across more edges• Solid carbide head with steel shanks on 3⁄8" diameter and larger

Shank Included Angle Model # Reg. Sale Size Dia. OAL 82° 90° Price Price 1⁄8" 1⁄8" 11⁄2" KN317-0065 KN317-0075 $15.61 $8.99 3⁄16 3⁄16 11⁄2 KN317-0066 KN317-0076 19.52 10.99 1⁄4 1⁄4 2 KN317-0067 KN317-0077 23.58 12.99 3⁄8 1⁄4 2 KN317-0068 KN317-0078 45.82 25.99 1⁄2 3⁄8 21⁄8 KN317-0069 KN317-0079 63.51 35.99 3⁄4 1⁄2 23⁄4 KN317-0071 KN317-0081 117.94 67.99 1 1⁄2 23⁄4 KN317-0072 KN317-0082 191.44 110.99

As Low As

$899

HSS 118° & Cobalt Silver & Deming Drills1⁄2" Shank

• 6" OAL • Round shank • 3" fl ute length

HSS M-42 Cobalt List R56 Reg. Sale List R56CO Reg. Sale Size Model # Price Price Model # Price Price 33⁄64" KN317-9326 $26.42 $17.99 KN317-9382 $44.82 $26.99 17⁄32 KN317-9327 26.42 17.99 KN317-9383 42.65 26.99 9⁄16 KN317-9329 27.15 18.99 KN317-9385 42.12 26.99 37⁄64 KN317-9330 29.47 20.99 KN317-9386 49.67 30.99 19⁄32 KN317-9331 29.53 20.99 KN317-9387 52.59 29.99 5⁄8 KN317-9333 30.51 21.99 KN317-9389 49.07 29.99 21⁄32 KN317-9335 32.64 22.99 — 11⁄16 KN317-9337 33.77 24.99 KN317-9392 54.74 32.99 23⁄32 KN317-9339 34.63 24.99 KN317-9394 61.17 36.99 3⁄4 KN317-9341 36.47 26.99 KN317-9396 61.17 36.99 25⁄32 KN317-9343 39.80 28.99 KN317-9398 67.32 41.99 13⁄16 KN317-9345 41.96 28.99 KN317-9400 68.08 41.99 27⁄32 KN317-9347 44.21 29.99 KN317-9402 75.02 44.99 7⁄8 KN317-9349 45.14 32.99 KN317-9404 75.48 44.99 15⁄16 KN317-9353 53.84 36.99 KN317-9408 85.76 49.99 31⁄32 KN317-9355 55.50 38.99 KN317-9409 95.90 58.99 1 KN317-9357 69.35 42.99 KN317-9411 95.90 58.99

As Low As

$1799

HSS TiN Tipped 118˚ Jobber Drills

• 118˚ radial special pointTiN TippedIncreases lubricity and heat resistance. Same benefi ts of TiN at a fraction of the cost

*Bright Finish

Flute Mfr’s Sale Size L OAL Model # List Price 1⁄16" 7⁄8" 17⁄8" KN327-3736* $2.59 $1.20 3⁄32 11⁄4 21⁄4 KN327-3738 2.59 1.27 7⁄64 11⁄2 25⁄8 KN327-3739 2.73 1.35 1⁄8 15⁄8 23⁄4 KN327-3740 2.73 1.35 9⁄64 13⁄4 27⁄8 KN327-3741 2.98 1.49 5⁄32 2 31⁄8 KN327-3742 3.02 1.51 11⁄64 21⁄8 31⁄4 KN327-3743 3.28 1.57 3⁄16 25⁄16 31⁄2 KN327-3744 3.67 1.80 13⁄64 27⁄16 35⁄8 KN327-3745 4.02 2.02 7⁄32 21⁄2 33⁄4 KN327-3746 4.47 2.23 15⁄64 25⁄8 37⁄8 KN327-3747 4.83 2.42 1⁄4 23⁄4 4 KN327-3748 5.14 2.59 17⁄64 27⁄8 41⁄8 KN327-3749 6.18 3.10 9⁄32 215⁄16 41⁄4 KN327-3750 6.36 3.22 19⁄64 31⁄16 43⁄8 KN327-3751 7.39 3.72 5⁄16 33⁄16 41⁄2 KN327-3752 8.13 4.12 11⁄32 37⁄16 43⁄4 KN327-3754 10.05 5.07 3⁄8 35⁄8 5 KN327-3756 11.60 5.91 13⁄32 37⁄8 51⁄4 KN327-3758 13.70 6.87 7⁄16 41⁄16 51⁄2 KN327-3760 15.85 7.94 15⁄32 45⁄16 53⁄4 KN327-3762 18.80 9.46 1⁄2 41⁄2 6 KN327-3764 19.75 10.06

SAVEUP TO

53%As Low As

$120






































































































Industry GUARANTEED! Drills/Countersinks

135° Cobalt Silver & Deming Sets

No. of Low Pcs. Sizes Model # Price

8 9⁄16-1" x 16ths KN405-0497 $105.00 6 7⁄8-11⁄2 x 8ths KN405-0498 179.00

For general-purpose applications.• 135° self-centering split point prevents “walking” • Includes heavy-duty caseCobalt• Provides better wear resistance in hardness and

toughness compared to HSS• For use in high-tensile alloys, titanium, cast iron,

Inconel and high-nickel stainless steels

As Low As

$105

SAVEUP TO

68%

Mfr’s Sale Set Brand Sizes Model # List Price 8 Pc. Triumph 9⁄16-1" x 16ths KN240-6548 $348.10 $109.95 8 Pc. Triumph ThunderBit® 9⁄16-1 x 16ths KN240-6946* 438.95 155.95 33 Pc. Triumph 1⁄2-1 x 64ths KN240-6549 1,370.42 425.95 33 Pc. Triumph ThunderBit® 1⁄2-1 x 64ths KN240-6550* 1,628.78 569.95 *With flatted shank

HSS Silver & Deming Drill Sets

• 1⁄2" shankStarting At

$10995

5 Pc. Cobalt Single Flute Countersink Sets60, 82 & 90°

• Designed to perform a variety of jobs including chamfering, deburring and countersinking

• Can be used in hand-held applications and non-rigid machine setups

• The large positive rake and single fl ute construction provide a smooth surface fi nish on a wide variety of material

• For use in high tensile alloys, titanium, cast iron, Inconel and high-nickel stainless steels

Sets Include: 1⁄4, 3⁄8, 1⁄2, 3⁄4, 1"

Your Choice


60° Model # KN405-065482° Model # KN405-045390° Model # KN405-0452

SAVE52%

Flute Mfr’s Sale Size L OAL Model # List Price 1⁄16" 7⁄8" 17⁄8" KN240-6947 $1.83 $ .87 5⁄64 1 2 KN240-6948 1.83 .87 3⁄32 11⁄4 21⁄4 KN240-6949 1.96 .93 7⁄64 15⁄16 23⁄8 KN240-6950 1.96 .93 1⁄8 17⁄16 21⁄2 KN240-6951 2.23 1.06 9⁄64 19⁄16 25⁄8 KN240-6952 2.23 1.06 5⁄32 111⁄16 23⁄4 KN240-6953 2.45 1.17 11⁄64 113⁄16 27⁄8 KN240-6954 2.61 1.24 3⁄16 17⁄8 3 KN240-6955 2.97 1.41 13⁄64 115⁄16 31⁄8 KN240-6956 3.21 1.53 7⁄32 2 31⁄4 KN240-6957 3.53 1.68 15⁄64 21⁄16 33⁄8 KN240-6958 3.80 1.81 1⁄4 2 31⁄2 KN240-6959 4.07 1.94 17⁄64 21⁄8 35⁄8 KN240-6960 5.00 2.38 9⁄32 21⁄4 33⁄4 KN240-6961 5.62 2.68 19⁄64 23⁄8 37⁄8 KN240-6962 6.11 2.91 5⁄16 21⁄2 4 KN240-6963 6.27 2.99 21⁄64 29⁄16 41⁄16 KN240-6964 6.99 3.33 11⁄32 25⁄8 41⁄8 KN240-6965 7.85 3.74 23⁄64 211⁄16 43⁄16 KN240-6966 8.92 4.25 3⁄8 211⁄16 41⁄4 KN240-6967 9.16 4.36 25⁄64 23⁄4 45⁄16 KN240-6968 10.35 4.93 13⁄32 213⁄16 43⁄8 KN240-6969 10.63 5.06 27⁄64 27⁄8 47⁄16 KN240-6970 11.76 5.60 7⁄16 215⁄16 41⁄2 KN240-6971 12.65 6.02 29⁄64 3 45⁄8 KN240-6972 14.56 6.93 15⁄32 31⁄8 43⁄4 KN240-6973 14.73 7.01 31⁄64 31⁄4 47⁄8 KN240-6974 15.48 7.37 1⁄2 33⁄8 5 KN240-6975 15.73 7.49

Black Oxide• Three-fl at shank design on sizes

over 11⁄64" provides a positive grip in conventional power tools

Trinado™ HSS 135° Split Point Mechanic’s Length Drills

Starting At

87¢

SAVEUP TO

28%Carbide 118° Jobber Drills

Carbide provides superior wear resistance. Can withstand the highest cutting temperatures in a higher degree of dimensional accuracy.• 118° point for quick penetration• Used in low-tensile-strength materials such as

cast iron, cast aluminum, bronze, copper, zinc, brass, rubber and plastics

• Not recommended for use in steel

Flute Reg. Sale Size L OAL Model # Price Price 1⁄32" 5⁄16" 11⁄4" KN317-4351 $7.14 $5.19 1⁄16 3⁄4 11⁄2 KN317-4353 7.72 5.59 3⁄32 1 2 KN317-4355 9.06 6.49 1⁄8 11⁄4 21⁄4 KN317-4357 11.12 7.99 3⁄16 15⁄8 23⁄4 KN317-4361 16.31 11.79 1⁄4 2 31⁄4 KN317-4365 23.56 16.99 5⁄16 23⁄8 33⁄4 KN317-4369 34.10 23.99 3⁄8 23⁄4 41⁄4 KN317-4373 47.39 33.99 1⁄2 3 43⁄4 KN317-4381 85.44 61.99

SAVEUP TO

63%

Mfr’s Sale Size Model # List Price 17⁄32" KN240-6633 $32.00 $11.95 9⁄16 KN240-6635 33.51 12.95 19⁄32 KN240-6637 37.17 13.95 5⁄8 KN240-6639 36.99 14.95 21⁄32 KN240-6641 39.24 15.95 11⁄16 KN240-6643 40.93 15.95 23⁄32 KN240-6645 44.53 16.95 3⁄4 KN240-6647 44.46 17.95 25⁄32 KN240-6649 48.11 18.95 13⁄16 KN240-6651 49.98 19.95 27⁄32 KN240-6653 53.91 20.95 7⁄8 KN240-6655 53.57 21.95 15⁄16 KN240-6659 60.94 23.95 31⁄32 KN240-6661 67.54 24.95 1 KN240-6663 67.93 25.95

ThunderBit® HSS 118° Silver & Deming Drills• 1⁄2" shank • 6" overall length • 3" fl ute length• Surface treated• Split point and fl atted shank

As Low As

$1195
































































http://use-enco.com


FAST & FRIENDLY CustomerTaps

HSS Surface Treated Fast Spiral Flute TapsPlug & Bottoming Styles SAVE

UP TO

61%Features:• Approximately 52° helix—increases chip lifting action • Draw chips out of a hole where chip disposal is a problem• Also used to span an interruption in a keyway, slot or gap in the tapped surface• Ground thread for better surface fi nish and tighter tolerances• Recommended for tapping blind holes in aluminum, magnesium,

brass, copper and die-cast metalsSurface Treatments:Oxide (Blue/Black)• Prevents galling and welding• Recommended for ferrous materials (iron based)ElektraLUBE®

• Reduces torque to prevent welding, loading and galling between the tap and the workpiece

• Recommended for use in stainless steels, steel forgings, tool and die steels, hot and cold rolledsteels, high-nickel alloys, beryllium, copper andsome aluminum alloys

Thread Limit: Indicates amount above basic pitchdiameter .0005" graduations per H limit value

Oxide Plug

ElektraLUBE® Plug

Oxide ElektraLUBE® Thread Thread No. of Plug Bottoming Mfr’s Sale Plug Bottoming Mfr’s Sale Size Limit Flutes OAL Model # Model # List Price Model # Model # List Price 4-40 H2 2 17⁄8" KN319-7035 KN319-7036 $24.84 $10.99 KN319-7058 KN319-7076 $28.46 $11.99 6-32 H3 2 2 KN319-7037 KN319-7045 20.18 7.99 KN319-7062 KN319-7080 22.99 8.99 8-32 H3 3 21⁄8 — KN319-7046 20.18 8.99 KN319-7063 KN319-7081 22.96 8.99 10-24 H3 3 23⁄8 — KN319-7047 20.18 8.99 KN319-7064 KN319-7082 23.07 9.99 10-32 H3 3 23⁄8 — KN319-7048 20.18 7.99 KN319-7065 KN319-7083 23.07 8.99 1⁄4"-20 H3 3 21⁄2 KN319-7039 KN319-7049 21.90 8.99 KN319-7066 KN319-7084 24.33 9.99 5⁄16-18 H3 3 223⁄32 KN319-7041 KN319-7051 26.94 11.99 KN319-7068 KN319-7086 30.77 12.99 3⁄8-16 H3 3 215⁄16 KN319-7042 KN319-7052 31.28 13.99 KN319-7069 KN319-7088 35.75 14.99 1⁄2-13 H3 3 33⁄8 KN319-7043 KN319-7053 55.12 24.99 KN319-7070 KN319-7091 62.49 26.99

Production Grade Plug Chamfer: 3-5 Threads, Bottoming Chamfer: 1-2 Threads

Starting At

$799

SAVE35%

Features:• Draw chips out of a hole where chip disposal is a problem • Also used to span an interruption in a keyway, slot or gap in the tapped surface • High helix increases chip lifting action• Ground thread for better surface fi nish and tighter tolerancesList 290• 45° helix • Designed for tapping hardened steel, such as 4140, 4340, H13, D2 and 1055 up to 35 HRC, as well as a variety of stainless steels

Surface Treatment: Oxide (Blue/Black)• Prevents galling and welding• Recommended for ferrous materials (iron based)

Thread Thread No. of Mfr’s Sale Size Limit Flutes OAL Model # List Price 2-56 H2 2 13⁄4" KN327-2121 $41.06 $25.99 4-40 H2 2 17⁄8 KN327-2123 27.11 17.49 4-40 H3 3 17⁄8 KN327-2124 27.11 17.49 6-32 H3 3 2 KN327-2128 22.01 13.99 8-32 H3 3 21⁄8 KN327-2132 22.01 13.99 10-24 H3 3 23⁄8 KN327-2135 22.01 13.99 10-32 H3 3 23⁄8 KN327-2138 22.01 13.99 1⁄4"-20 H3 3 21⁄2 KN327-2141 23.90 15.49 1⁄4-20 H5 3 21⁄2 KN327-2142 23.90 15.49 1⁄4-28 H3 3 21⁄2 KN327-2143 23.90 15.49 5⁄16-18 H3 3 223⁄32 KN327-2146 29.36 18.99 3⁄8-16 H3 3 215⁄16 KN327-2153 34.13 21.99 1⁄2-13 H3 3 33⁄8 KN327-2164 60.08 37.99 1⁄2-13 H5 3 33⁄8 KN327-2165 60.08 37.99 5⁄8-11 H3 4 313⁄16 KN327-2169 105.81 66.99

HSS Surface Treated Spiral Flute Taps – Modifi ed Bottoming Style

Grade: High Performance Material: 3% Vanadium

Chamfer: 2-3 ThreadsGround Thread

HSS Spiral Point Plug Style TapsUncoated, Black Oxide, and elektraLUBE®

• Shoots chips ahead of the cutting action • Ground thread • Best used for tapping through holes• Ideal for threading a wide variety of ductile materials, steels, copper, copper alloys, brass and plastics• Necked design

Black Oxide• Prevents galling and welding• Recommended for ferrous materialselektraLUBE®

• Reduces torque to prevent welding, loading and galling between the tap and the workpiece

• For use in stainless steels, steel forgings, tool and die steels, hot and cold rolled steels, high nickel alloys, beryllium, copper and some aluminum alloys

Thread Thread No. of Uncoated Reg. Sale Black Oxide Reg. Sale elektraLUBE® Reg. Sale Size Limit Flutes OAL Model # Price Price Model # Price Price Model # Price Price 0-80 H2 2 15⁄8" KN319-5486 $24.98 $10.95 KN319-5567 $24.98 $14.95 KN319-6864 $28.66 $14.95 2-56 H2 2 13⁄4 KN319-5488 19.15 7.95 KN319-5571 19.15 10.95 KN319-6867 22.37 10.95 4-40 H2 2 17⁄8 KN319-5489 12.31 4.95 KN319-5578 12.31 6.95 KN319-6870 14.80 6.95 6-32 H3 2 2 KN319-5500 10.36 3.95 KN319-5585 10.36 5.95 KN319-6884 12.55 5.95 8-32 H3 2 21⁄8 KN319-5501 10.36 3.95 KN319-5589 10.36 5.95 KN319-6885 12.55 5.95 10-24 H3 2 23⁄8 KN319-5502 10.36 3.95 KN319-5592 10.36 5.95 KN319-6886 12.59 5.95 10-32 H3 2 23⁄8 KN319-5503 10.36 3.95 KN319-5594 10.36 5.95 KN319-6887 12.59 5.95 1⁄4"-20 H3 2 21⁄2 KN319-5519 10.36 3.95 KN319-5600 10.36 5.95 KN319-6918 13.04 5.95 5⁄16-18 H3 2 223⁄32 KN319-5522 11.17 4.95 KN319-5603 11.17 5.95 KN319-6922 14.17 6.95 3⁄8-16 H3 3 215⁄16 KN319-5525 13.28 4.95 KN319-5607 13.28 7.95 KN319-6924 16.82 7.95 1⁄2-13 H3 3 33⁄8 KN319-5529 23.05 9.95 KN319-5612 23.05 12.95 KN319-6928 28.48 13.95

As Low As

$395

T-Handle Tap WrenchesRatchet & Plain Type• Used in hand tapping • Can also be used with drills, reamers, etc.

Tap Size Low Range Model # Price Plain Type 1⁄16-3⁄16" KN318-0010 $3.26 5⁄32-1⁄4 KN318-0015 3.92 1⁄4-1⁄2 KN318-0020 4.61 Ratchet Type 1⁄4-1⁄2 KN318-0076 12.48

Plain TypeRatchet Type

36-37 HD 14-09 Taps.indd 3636-37 HD 14-09 Taps.indd 36 8/14/14 9:42 AM8/14/14 9:42 AM























































































Service 800-USE-ENCO Taps

HSS Spiral Point Plug Style TapsUncoated & TiN Coated

• Recommended for through or blind holes which allow for chip accumulation in the bottom of the hole

• Designed for machine tapping in through holes in steel, steel alloys, iron, brass, aluminum, copper and plastic

• Ground thread

TiN Coated• Offers outstanding wear resistance, reduces friction and

prevents galling • Allows for increased tapped feeds to improve productivity

TiN Coated

As Low As

$395

No. of H Uncoated Low TiN Coated Low Size Flutes Limit Model # Price Model # Price 2-56 2 H2 KN337-4334 $7.59 KN337-4484 $9.65 4-40 2 H2 KN337-4345 4.95 KN337-4492 6.65 6-32 2 H2 KN337-4363 4.95 KN337-4498* 5.85 8-32 2 H3 KN337-4377 3.95 KN337-4502 5.95 10-24 2 H3 KN337-4390 3.95 KN337-4506 6.25 10-32 2 H3 KN337-4397 3.95 KN337-4509 6.25 1⁄4"-20 2 H3 KN337-4408 3.95 KN337-4513 6.45 1⁄4-28 2 H3 KN337-4417 3.95 KN337-4517 6.65 5⁄16-18 2 H3 KN337-4423 4.45 KN337-4520 7.34 5⁄16-24 2 H3 KN337-4432 4.45 KN337-4523 8.09 3⁄8-16 3 H3 KN337-4439 5.25 KN337-4526 9.69 3⁄8-24 3 H3 KN337-4445 5.65 KN337-4529 9.89 1⁄2-13 3 H3 KN337-4457 8.65 KN337-4537 14.59 1⁄2-20 3 H3 KN337-4461 10.85 KN337-4540 15.79*H3 thread limit

HSS Hand Tap Sets

Sets include one each: Taper, plug, and bottoming style taps. Ground thread.• H limit: Indicates amount above basic pitch diameter; .0005" graduations per H limit value

Thread H No. of Thread Mfr’s Sale Size Limit Flutes L OAL Model # List Price 4-40 H2 3 9⁄16" 17⁄8" KN319-6171 $28.64 $11.59 6-32 H3 3 11⁄16 2 KN319-6172 22.07 8.79 6-40 H2 3 11⁄16 2 KN319-6173 23.30 8.89 8-32 H3 4 3⁄4 21⁄8 KN319-6174 22.68 9.19 10-24 H3 4 7⁄8 23⁄8 KN319-6175 23.30 9.39 10-32 H2 4 7⁄8 23⁄8 KN319-6176 26.12 9.79 10-32 H3 4 7⁄8 23⁄8 KN319-6177 23.30 9.39 1⁄4"-20 H2 4 1 21⁄2 KN319-6178 32.52 12.79 1⁄4-20 H3 4 1 21⁄2 KN319-6179 25.08 10.19 1⁄4-28 H3 4 1 21⁄2 KN319-6180 25.08 10.19

Bottoming

Taper

Starting At

$879

SAVEUP TO

63% Thread H No. of Thread Mfr’s Sale Size Limit Flutes L OAL Model # List Price 5⁄16"-18 H3 4 11⁄8" 223⁄32" KN319-6181 $30.84 $12.49 5⁄16-24 H3 4 11⁄8 223⁄32 KN319-6182 30.84 12.49 3⁄8-16 H3 4 11⁄4 215⁄16 KN319-6183 34.93 14.19 7⁄16-14 H3 4 17⁄16 35⁄32 KN319-6184 65.50 24.09 7⁄16-20 H3 4 17⁄16 35⁄32 KN319-6185 65.50 24.09 1⁄2-13 H3 4 121⁄32 33⁄8 KN319-6186 62.70 25.59 1⁄2-20 H3 4 121⁄32 33⁄8 KN319-6187 70.77 28.69 5⁄8-11 H3 4 113⁄16 313⁄16 KN319-6188 128.22 49.59 3⁄4-10 H3 4 2 41⁄4 KN319-6189 179.52 69.29

Plug

Grade: General Purpose Plug Chamfer: 3-5 ThreadsBottoming Chamfer: 1-2 Threads Ground Thread• Used in all types of hand and machine tool operations for ferrous and nonferrous materials• Ground thread for better surface fi nish and tighter tolerances • Bright fi nish• Thread Limit: Indicates amount above basic pitch diameter 0.0005" graduations

per H limit value• Plug style is best used for tapping through holes• Bottoming style allows threading closer to the bottom of a blind hole• 3 Pc. Sets include one each: Taper, plug, and bottoming style taps

HSS Hand Taps

3 Pc. SetAs Low As$708

Thread Thread Plug Low Thread Bottoming Low 3 Pc. Sets LowSize Limit OAL Model # Price L Model # Price Model # Price3 Flute #2-56 H2 13⁄4" KN311-0631 $4.01 7⁄16" KN311-0632 $3.90 KN319-6165 $15.21 #4-40 H2 17⁄8 KN311-0681 2.42 9⁄16 KN311-0682 2.53 KN326-1548 9.32 #6-32 H3 2 KN325-4783 2.00 11⁄16 KN325-4784 1.94 KN326-1549 7.084 Flute #8-32 H3 21⁄8 KN311-0741 2.08 3⁄4 KN311-0742 2.00 KN326-1550 7.37 #10-24 H3 23⁄8 KN311-0761 2.17 7⁄8 KN311-0762 2.00 KN326-1551 7.55 #10-32 H3 23⁄8 KN311-0771 2.11 23⁄8 KN311-0772 2.00 KN326-1552 7.55 #12-24 H3 23⁄8 — — KN319-6167 8.24 1⁄4 "-20 H3 21⁄2 KN311-0001 2.05 1 KN311-0002 2.05 KN311-0004 8.14 1⁄4-28 H3 21⁄2 KN311-0011 2.17 1 KN311-0012 2.17 KN311-0014 8.14 5⁄16-18 H3 223⁄32 KN311-0021 2.89 11⁄8 KN311-0022 2.72 KN311-0024 10.04 5⁄16-24 H3 223⁄32 KN311-0031 2.89 11⁄8 KN311-0032 2.72 KN311-0034 10.04 3⁄8-16 H3 215⁄16 KN311-0041 3.26 11⁄4 KN311-0042 3.08 KN311-0044 11.35 3⁄8-24 H3 215⁄16 KN311-0051 3.26 11⁄4 KN311-0052 3.08 KN311-0054 11.35 7⁄16-14 H3 35⁄32 KN311-0061 6.34 17⁄16 KN311-0062 6.03 KN311-0064 19.28 7⁄16-20 H3 35⁄32 KN311-0071 6.34 17⁄16 KN311-0072 6.03 KN311-0074 19.28 1⁄2-13 H3 33⁄8 KN311-0081 5.90 121⁄32 KN311-0082 5.41 KN311-0084 20.48 1⁄2-20 H3 33⁄8 KN311-0091 6.34 121⁄32 KN311-0092 6.25 KN311-0094 22.94 5⁄8-18 H3 313⁄16 KN311-0131 13.18 113⁄16 KN311-0132 12.55 — 3⁄4-10 H3 41⁄4 KN311-0141 18.43 2 KN311-0142 17.56 — 3⁄4-16 H3 41⁄4 KN311-0151 18.43 2 KN311-0152 17.56 —

Designed for the internal threading of pipes and pipe fi ttings.• Primary application is to cut threads• Medium hook for general-purpose

tapping in all commonly used materials except cast iron and brass

• Assembly of NPT thread requires a thread sealant or PTFE tape

• Ground thread for better surface fi nish and tighter tolerances

• Nominal tap size is based upon the fi tting size not the actual size of the tap

HSS NPT Pipe Taps

Thread No. of Mfr’s Sale Size Flutes OAL Model # List Price 1⁄16"-27 4 21⁄8" KN510-1204 $35.02 $17.95 1⁄8-27 4 21⁄8 KN510-1161* 35.02 17.95 1⁄8-27 4 21⁄8 KN510-1289 35.02 17.95 1⁄4-18 4 27⁄16 KN510-1302 38.70 19.95 3⁄8-18 4 29⁄16 KN510-1222 50.95 25.95 1⁄2-14 4 31⁄8 KN510-1217 81.49 41.95 3⁄4-14 5 31⁄4 KN510-1114 113.99 57.95 1-111⁄2 5 33⁄4 KN510-1023 173.26 88.95*Small shank .3125" dia.

SAVEUP TO

49%

36-37 HD 14-09 Taps.indd 3736-37 HD 14-09 Taps.indd 37 8/14/14 9:42 AM8/14/14 9:42 AM















































































































http://use-enco.com


Shop the 2014 Enco Master CatalogIndexable

SAVEUP TO

24% TPI TPI Grade GP3 Grade GP50 Reg. Sale Description Int. Ext. Radius Thick. Model # Model # Price Price FLT-2L 7-20 8-36 .005" .150" KN317-3676 KN317-3591 $13.91 $10.95 FLT-2R 7-20 8-36 .003 .150 KN317-3655 KN317-3582 13.91 10.95 FLT-3L 5-12 6-20 .008 .195 KN317-3656 KN317-3578 14.46 10.95 FLT-3R 5-12 6-20 .005 .195 KN317-3657 KN317-3587 14.46 10.95 FLT-4L 4-12 4-20 .008 .255 KN317-3658 KN317-3659 17.97 13.95 FLT-4R 4-12 4-20 .003 .255 KN317-3660 KN317-3661 17.97 13.95

• Ideal for grooving and profi ling applications

• With coolant holes

Internal Threading & Grooving Bars & Flo-Lock Inserts

Right-hand tools use left-hand inserts; left-hand tools use right-hand inserts.

Flo-Lock 60° Threading Inserts • GP3 Grade for combined hardness and toughness on

high-temperature alloys, stainless and nonferrous• GP50 Grade for steels

Min. Shank Corner Bore Right Hand Left Hand Reg. Sale Description Dia. OAL Rad. Dia. Insert Style Model # Model # Price Price A08-FLER/L2 .500" 8" .437" .730" FL-2L, FL-2R KN317-3557 KN317-3553 $94.19 $79.98 A10-FLER L2 .625 10 .500 1.000 FL-2L, FL-2R KN317-3558 — 110.76 95.98 A12-FLER/L2 .750 10 .562 1.125 FL-2L, FL-2R KN317-3551 KN317-3554* 134.57 116.98 A16-FLER/L3 1.000 12 .688 1.375 FL-3L, FL-3R KN317-3559 KN317-3555 175.98 152.98 A20-FLER/L3 1.250 14 .875 1.750 FL-3L, FL-3R KN317-3560 KN317-3556 187.37 159.98 A28-FLER L4 1.750 16 1.250 2.250 FL-4L, FL-4R KN317-3552 — 242.24 209.98* Min. bore dia.: 1.26"

If Shank Shank Purchased Sale Toolholder W Ht. OAL Insert Model # Separately Price MWLNR 10-3A 5⁄8" 5⁄8" 4" WNMG332 KN317-0801 $196.52 $139.00 MWLNR 12-3B 3⁄4 3⁄4 41⁄2 WNMG332 KN317-0802 205.28 143.00 MCLNR 12-4B 3⁄4 3⁄4 41⁄2 CNMG432 KN317-0799 223.08 165.00 MCLNR 16-4D 1 1 6 CNMG432 KN317-0798 227.45 165.00 MWLNR 12-4B 3⁄4 3⁄4 41⁄2 WNMG432 KN317-0803 236.28 165.00 MWLNR 16-4D 1 1 6 WNMG432 KN317-0804 240.65 159.00

Turning Toolholder Kit• Insert Grade TP200

for Semi-FinishingTP200 Grade Cross Reference ChartSeco TP200Iscar IC9025, IC8048, IC8025Kennametal KC9125, KC9215, KC9225Mitsubishi UC6010, UE6020, US7020RTW RC8015, RC8025Sandvik GC4025, GC4225, GC2015Sumitomo AC1000, AC2000, AC500GStellram NL30Valenite SV415, SV315, SV325Walter WAK20, WAK25

BONUSTOOLHOLDERW/ Purchase of

10 Inserts

SAVEUP TO

34%

As Low As

$139

HSS & Cobalt Ground Square Tool Bits & Boring BarsM-2 HSS• Ground for general purpose• Works extremely well on mild steel, alloys and tool steels • Also an excellent fi nishing tool5% Cobalt• Ground for heavy cuts on castings and forgings • A T-4 type of tungsten high-speed steel which

can withstand higher heat than M-2 type• Improved red hardness

8% & 10% Cobalt• Superior types of high-speed steel which will

work better where high heat is present• Used for heavy cuts in hard materials

Sq. M-2 HSS Low 5% Cobalt Low 8% Cobalt Low 10% Cobalt Low Size OAL Model # Price Model # Price Model # Price Model # PriceCobalt Square 1⁄8" 21⁄2" KN383-5308 $1.26 KN383-5008 $2.32 KN383-5108 $2.53 KN383-5208 $2.99 3⁄16 21⁄2 KN383-5312 1.26 KN383-5012 2.32 — KN383-5212 3.43 1⁄4 21⁄2 KN383-5316 1.54 KN383-5016 2.78 KN383-5116 3.05 KN383-5216 3.60 5⁄16 21⁄2 KN383-5320 1.87 KN383-5020 3.34 KN383-5120 3.74 KN383-5220 4.59 3⁄8 3 KN383-5324 2.76 KN383-5024 4.57 KN383-5124 5.23 KN383-5224 6.53 7⁄16 31⁄2 KN383-5328 5.10 KN383-5028 8.09 KN383-5128 9.19 KN383-5228 14.26 1⁄2 4 KN383-5332 5.38 KN383-5032 9.24 KN383-5132 10.53 KN383-5232 14.29 5⁄8 41⁄2 KN383-5340 10.09 KN383-5040 16.63 KN383-5140 18.76 KN383-5240 27.90 3⁄4 5 KN383-5345 14.89 KN383-5042 24.79 — KN383-5245 41.96 7⁄8 6 KN326-0851 28.49 KN383-5056 45.07 — — 1 7 KN383-5350 33.86 KN383-5064 53.65 KN383-5150 63.11 KN383-5250 57.65Long Cobalt Square 1⁄4 6 KN619-2198 7.73 — KN383-5416 7.99 KN383-5516 6.90 1⁄4 8 KN619-2202 8.35 — — — 5⁄16 6 — KN619-2199 9.89 — — 5⁄16 8 KN619-2203 9.46 — — — 3⁄8 6 — KN619-2200 13.31 KN383-5424 11.57 KN383-5524 13.35 3⁄8 8 KN619-2204 12.62 — KN383-5425 15.44 KN383-5525 12.59 1⁄2 6 — KN619-2201 21.73 KN383-5432 18.82 KN383-5532 21.70 1⁄2 8 KN619-2205 20.93 — — KN383-5533 27.31 5⁄8 8 KN619-2206 27.13 — — —

Easy Bore Boring Bars

• Straight shank • Double end • Combo 45° end/90° end

Bar Bit Tool Bit Low Dia. OAL Size Shape Model # Price3⁄8" 6" 3⁄16" Round KN378-4006 $10.551⁄2 9 3⁄16 Square KN378-4008 12.499⁄16 9 3⁄16 Square KN378-4010 6.885⁄8 10 1⁄4 Square KN378-4012 17.073⁄4 12 1⁄4 Square KN378-4014 18.83

1 12 5⁄16 Square KN378-4016 24.38 11⁄4 16 1⁄2 Square KN378-4018 37.25 11⁄2 18 1⁄2 Square KN378-4020 50.71

5 Pc. Double End Set 3/8, 1/2, 5/8, 3/4 & 1" in wood stand



38-39 HD 14-09 Index.indd 3838-39 HD 14-09 Index.indd 38 8/14/14 9:47 AM8/14/14 9:47 AM

































































































Online at use-enco.com Indexable

Style TPMM (T.T.) Indexable Carbide Inserts

5 Pc. Indexable Carbide Turning Toolholder Sets

Includes: • Style A, 1 left, 1 right, Style B, 1 left, 1 right and

1 Style E holders and insert hold-down screw • Uses T.T. style carbide inserts

Shank Insert Reg. Sale Size IC Model # Price Price 3⁄8" 1⁄4" KN250-1400 $33.11 $21.99 1⁄2 3⁄8 KN250-1401 36.22 29.99 5⁄8 3⁄8 KN250-1402 54.85 34.99 3⁄4 3⁄8 KN250-1404 78.66 38.99 1 1⁄2 KN250-1406 79.70 49.99

C5 Sale Price Ea. TiN Coated Sale Price Ea. Size IC Model # 1-9 10+ Model # 1-9 10+ 221 1⁄4" KN340-1000 $4.13 $3.10 KN340-1200 $4.59 $3.21 222 1⁄4 KN340-1006 3.99 2.79 KN340-1204 4.59 3.21 321 3⁄8 KN340-1010 4.29 3.00 KN340-1208 4.79 3.35 322 3⁄8 KN340-1014 4.29 3.00 KN340-1212 4.79 3.35 323 3⁄8 KN891-6962 4.29 3.00 KN891-6963 4.79 3.35 431 1⁄2 KN325-7217 4.99 3.49 KN325-7219 5.69 3.98 432 1⁄2 KN340-1016 4.99 3.49 KN340-1216 5.69 3.98 433 1⁄2 KN325-7221 4.99 3.49 KN325-7222 5.69 3.98

Starting At

$2199

SAVEUP TO

50%

SAVE30%In Pkg. Qty.

Grade Info:I22 (C2 Grade): Uncoated – For machining 200 and 300 series stainless steel, cast iron, nonferrous alloys, nonmetals and most high-temperature alloys. Provides excellent wear resistance.I55 (C5/C6 Grade): Uncoated – For heavy roughing to semi-fi nishing of all steels.ICP55 (C5/C6 Grade): TiN Coated – Gold coated for turning and milling carbon and alloy steels, tool steels and stainless steels.IG125T (C5 Grade): CVD Coating TiN/Al203/TiCN Coated – With very large thickness. Suitable for roughing of steels and cast steels at small to medium cutting speeds.IT225T (C6 Grade): Uncoated – Primarily used in stainless steel applications.IX225T (C5 Grade): CVD TiN/TiCN Coated – Semi-fi nishing to roughing operations on all stainless at low to moderate cutting speeds.TCN55 (C5 Grade): Multi-layer TiN Coated – For machining all steels at increased speed and feeds.

Insert Chip- Reg. Sale Style/Size Breaker Grade Model # Price Price CCMT32.52 IF IG125T KN411-2227 $6.17 $4.93 CNMG431P ICP55 KN328-5680 4.94 3.88 CNMG432 ICP55 KN328-5673 4.90 3.84 CNMG432 IMR IG125T KN411-2230 6.73 5.38 CNMG432 IMF IT225T KN411-2225 5.53 4.42 CNMG432 IMF IX225T KN411-2231 6.73 5.38 DCMT32.51 IF IG125T KN411-2228 6.17 4.93 DNMG432 IMR IG125T KN411-2234 8.18 6.54 SNMG322 ICP55 KN328-5619 2.92 2.28 SNMG432 ICP55 KN328-5620 4.46 3.49 SNMG432 IMF IT225T KN411-2233 6.73 5.38 SNMG432 IMF IX225T KN411-2232 6.73 5.38 SPG422 I22 KN350-4222 3.65 2.86 SPG422 I55 KN350-4225 4.49 3.52 SPG422 TCN55 KN350-4229 6.15 4.82 SPU422 I55 KN351-4225 4.14 3.24 TCMT32.52 IF IG125T KN411-2229 6.33 5.06 TNMG221 ICP55 KN328-5570 2.69 2.11 TNMG221 IMF IT225T KN411-2224 3.53 2.82 TNMG332 IMF IT225T KN411-2226 5.77 4.61 TNMG432 IMF IT225T KN411-2235 8.18 6.54 TNMG432 IMF IX225T KN411-2236 8.18 6.54 TPG321 I22 KN340-3212 3.10 2.43 TPG321 TCN55 KN340-9321 4.91 3.85 TPG322 I22 KN340-3222 3.10 2.43 TPG322 I55 KN340-3225 3.38 2.65 TPG322 TCN55 KN340-9322 4.91 3.85 TPG432 TCN55 KN340-4329 8.36 6.56 TPU322 I55 KN341-3225 3.02 2.36 TPU322 TCN55 KN341-9322 4.21 3.30 VNMG332 IMF IG125T KN411-2237 8.18 6.54 VNMG332 IMF IT225T KN411-2238 8.18 6.54

Carbide Turning InsertsSAVE20%

CNMG432 — IG125T

CNMG432 — IT225T

CNMG432 — IX225T

SNMG432 — IT225T

SNMG432 — IX225T

SPU422 — I55

TNMG432 — IT225T

TNMG432 — IX225T

VNMG332 — IT225T

Carbide-Tipped Boring Bar SetsGrade C2 for General Purpose & C6 for Steel

Shank Pcs. Reg. Sale Dia. Per Set C2 Model # C6 Model # Price Price 3⁄8" 9 KN375-1002 KN375-1006 $44.90 $29.95 1⁄2 9 — KN375-1206 57.85 32.95 5⁄8 12 KN375-1402 KN375-1406 99.62 65.95

As Low As

$2995

Low Description Model # Price Socket Screw for Clamp KN505-6927 $ .51 Hold-Down Clamp KN505-6926 5.66

Replacement Parts

Cutting Shank No. of Reg. Sale Dia. Dia. Inserts Model # Price Price 3⁄4" 3⁄4" 1 KN422-3013 $57.96 $45.95 11⁄4 R8 2 KN422-3012 91.09 71.99 11⁄2 3⁄4 3 KN422-3010 111.79 88.49 11⁄2 1 3 KN422-3011 108.69 85.95 2 3⁄4 3 KN422-3008 151.13 120.95 2 1 3 KN422-3009 148.03 116.95 2 R8 3 KN422-3007 164.59 129.99 2 R8 3 KN422-3003* 226.71 178.59 21⁄2 R8 5 KN422-3006 252.59 199.99 3 11⁄4 5 KN422-3005 260.88 205.95 3 R8 5 KN422-3004 283.65 223.89* Extra-long OAL of 81⁄4" Inserts sold separately.

Tri-Dex Indexable End Mills

Positive Rake • 90° Cut • Uses 3⁄8" I.C. triangular

inserts (TPG/TPU)• Cutter body

length: 15⁄8"

Starting At

$4595

38-39 HD 14-09 Index.indd 3938-39 HD 14-09 Index.indd 39 8/14/14 9:47 AM8/14/14 9:47 AM








































































http://use-enco.com

http://use-enco.com


Easy, Secure ShoppingCalipers

Measuring Reg. Sale Range Model # Price Price 1.125-2.125" KN612-5814 $103.16 $69.95 1.875-2.875 KN612-5818 124.02 82.95 2.875-3.875 KN240-0028 145.98 99.95

• Bezel rotates for zero setting • Measures hard-to-get-at IDs• Spring-loaded arms with

.04" dia. measuring tips and quick-release button

• 31⁄4" approximate usableleg length

• For checking internal bores and recess dia.

• Rev. counter • .001" smallest grad.

Internal Dial Calipers

Starting At

$6995


$6995Mfr’s List: $109.75

SAVE36%

• Direct inch/metric conversion • Absolute/incremental measurements • .0005" resolution • Stainless steel frame • Includes case • For replacement battery, order Enco

Model #712-0185

6" Electronic Caliper



• Stainless steel, Swiss-made quality and design• Absolute and differential measuring system• 0-6"/0-150mm range • .0005"/0.01mm resolution • Auto shut-off• Instant inch/metric conversion• Specifi cation consistent with DIN 862• For replacement battery, order Enco Model #893-2055

6" Shop-Cal Electronic Caliper

• Scale surface satin-chrome fi nished with clear, crisp graduations

• Main scale is hardened and ground• 4-way measurement and covered rack• Measuring faces are ground,

hardened and lapped• 360° adjustable bezel• .001" dial grads.• Carrying case

Dial Calipers

SAVEUP TO

47%

As Low As

$1695 Meas. Range Dial Reg. Sale Range Per Rev. Color Model # Price Price 0-4" .100" White KN610-5077 $31.06 $16.95 0-6 .100 White KN610-5026 34.51 19.95 0-6 .100 Black KN610-5027 34.51 19.95 0-6 .200 White KN422-3410 39.11 22.95 0-8 .100 White KN610-5028 57.53 29.95 0-8 .100 Black KN610-5029 57.53 29.95 0-12 .100 White KN610-5032 78.25 42.95 0-12 .100 Black KN610-5033 78.25 42.95 0-12 .200 White KN422-3411 72.43 39.95

Toolmaker Universal Measuring SetIncludes:• 6" dial caliper, .001" graduation • 0-1" mic, .0001" graduation• 6" fl exible rule with 32nds, 64ths, 10ths and 100ths graduations• Complete with fi tted shop-hardened caseMfr’s # 52-095-007



SAVE49%Water Resistant to IP54 Standards

Unique Full-Size Decimal Characters• Direct inch/metric/fraction conversion• Stainless steel frame• Resolution: .0005"/.01mm

(fractions in 1⁄64th increments)• Absolute incremental measurement • 4-way measuring • RS232 output • Includes molded plastic case• For replacement battery, order

Enco Model #712-0185

6" Euro Cal® IV Electronic CaliperReads in Inch, Metric & Fractions



SAVEUP TO

22% Dial Meas. Mfr’s Sale Color Range Model # List Price White 0-6" KN610-5124 $150.00 $105.95 Black 0-6 KN610-5024 150.00 105.95 White 0-8 KN610-6009 261.00 205.95 White 0-12 KN610-6013 312.00 245.95

Dial Calipers• Hard-coated alloy • .001" graduation • .100" range per revolution • Stainless steel jaws • Extremely smooth

movement • 4-way measurements:

Inside, outside, depth and step

• 8" and 12" calipers supplied in plastic case

As Low As

$10595

SAVE45%


• An economical electronic caliper for general use

• ±.001" accuracy • .0005" resolution• Without output • Thumb roll • Large LCD• For replacement

battery, order Enco Model #712-0185



40-41 HD 14-09 CIM.indd 4040-41 HD 14-09 CIM.indd 40 8/14/14 9:49 AM8/14/14 9:49 AM























Online at use-enco.com Calipers

• .100" revolution dial • .001" graduation• Made of hardened

stainless steel

12" Dial CaliperWith Bonus 6" Caliper



BUY A 12" CALIPER AND GET A

BONUS6" CALIPER

($34.00 VALUE)

SAVE28%

6" X-tra Value CalElectronic Caliper

• Absolute/incremental measurements• Stainless steel frame• Large, easy-to-read display• Resolution: .0005"/.01mm• Direct inch/metric conversion• 4-way measuring• Includes #357 coin battery and case• For replacement battery, order Enco

Model #712-0185


$3595Mfr’s List: $50.40

6" Dial Caliper

• Satin-chrome fi nish• Stainless steel construction• 4-way measurement• .100" per rev. • .001" grad.• 360° rotating bezel • .001" accuracy • Includes case


$2995Mfr’s List: $84.55*Sliding surface is not TiN coated †115⁄16" Jaw length

As Low As

$7895 Range/ Dial Mfr’s Sale Rev. Color Mfr’s # Model # List Price 0-4" .200" White 505-716 KN307-3608 $92.90 $78.95 0-6" .200 White 505-717 KN307-3609 108.00 89.95 .100 White 505-675 KN307-3602 118.00 95.95 .100 Blue 505-675-51 KN307-3603 118.00 95.95 .100 Purple 505-675-52 KN307-3681 118.00 95.95 .100 Green 505-675-53 KN307-3682 118.00 95.95 .100 Red 505-675-54 KN307-3683 118.00 95.95 .100 Orange 505-675-55 KN307-3686 118.00 95.95 .100 Black 505-675-56 KN307-3688 118.00 95.95 0-8" .200 White 505-719 KN307-3610 161.00 134.95 .100 White 505-676 KN307-3605† 173.00 145.95 0-12" .100 White 505-677 KN307-3607* 274.00 185.95

Dial Calipers

• Extra-large dial face for ease of reading• Inside, outside, depth and step measurements• Hardened stainless throughout• Extra-rigid main beam (.132" thick)• Sliding surfaces of main beam are TiN coated

to decrease wear• .001" graduation• Jaw length: 19⁄16" (21⁄2" for 12")• Supplied in fi tted carrying case

SAVEUP TO

32%

• IP67 protection from coolants, dirt, and chips found in many manufacturing environments

• Certifi cate of inspection included• .0005"/.01mm resolution with ±.001" accuracy • Auto power on/off• For replacement battery, order Enco Model

#712-0185

Waterproof Digimatic Calipers

Meas. Mfr’s Sale Range Mfr’s # Model # List Price Without Output 0-6" 500-752-10 KN328-0873 $204.00 $155.00 0-12 500-754-10 KN327-9548 472.00 331.00With Output 0-6 500-762-10 KN326-1304 242.00 204.00 0-12 500-764-10 KN327-9549 524.00 408.00

As Low As

$155


$9295Mfr’s List: $113.00


• Hardened stainless steel throughout for longer life and corrosion resistance

• Large switchable inch/metric .001"/.1mm LCD

• Floating zero allows quick comparison readings • OD, ID and depth rod measurements • Two-year average battery life • ±.005" (±.02mm) accuracy • Without SPC output; with depth barMfr’s # 700-113-10

Measuring Mfr’s Sale Range Accuracy Model # List Price 0-6" ±.001" KN328-1574 $92.90 $59.95 0-8 ±.001 KN328-1575 121.00 89.95 0-12 ±.0015 KN328-1576 176.49 89.95 0-40 ±.003 KN328-1578 1,020.08 539.95

Electronic CalipersWith SPC Output• Large LCD• No rack or pinions —

scale is embedded in epoxy• OD, ID, step and depth

measurements on 6, 8, and 12" models

• Inch/metric conversion• 40" model is heavy-duty with

long jaws and fi ne adjustment• Resolution: .0005"• Certifi cate of calibration traceable

to NIST included• Includes fi tted case• For replacement battery, order

Enco Model #712-0185

rsSAVE

UP TO

49%

As Low As

$5995


























http://use-enco.com

http://use-enco.com


It’s IN STOCK and Indicators

SAVEUP TO

41%

Deluxe Dial Indicators• Easy reading graduations • Thread size: 4-48; M2.5 x .45• Adjustable bezel for convenient zero setting with clamp screw• Lug back supplied unless noted • White dial (except where noted)• Accuracy meets or exceeds

Federal specifi cations

*Flat back †Black dial

Meas. Dial Mfr’s Sale Range Dia. AGD Reading Grad. Model # List Price Inch .050" 2" 2 0-5-0 .0001" KN319-3676* $79.93 $56.95 .050 21⁄4 2 0-10 .0001 KN326-1170 79.93 52.95 .250 11⁄2 1 0-25-0 .0005 KN319-3679 46.61 32.95 .250 15⁄8 1 0-50-0 .001 KN319-3677 46.61 32.95 .250 21⁄4 2 0-50-0 .001 KN328-0954 51.06 35.95 .250 21⁄4 2 0-100 .001 KN328-0955 51.06 29.95 .250 21⁄4 2 0-25-0 .0005 KN328-0956 51.06 29.95 .500 2 2 0-100 .001 KN326-1171 36.63 24.95 1.000 2 2 0-100 .001 KN326-1172† 38.86 25.95 1.000 2 2 0-100 .001 KN712-3660 38.86 25.95 2.000 21⁄4 2 0-100 .001 KN326-1173 75.48 52.95 2.000 21⁄4 2 0-100 .001 KN326-1174† 75.48 52.95 Metric 10.0mm 21⁄4 2 0-100 .01 KN319-3682 46.61 34.95 20.0 21⁄4 2 0-100 .01 KN319-3683 74.37 54.95

As Low As

$2495

Centering Indicator

• For centering a workpiece or fi xture within .0002" of true center

• 1.6" dia. indicator face remains stationary while the machine spindle rotates

• .005" graduation• Includes points,

feelers, restraining arm and fi tted plastic case



SAVEOVER

40%• White dial• 1" travel dial

indicator, .001" grad., lever-operated

• On-off magnetic base indicator holder with fi ne adjustment

Dial Indicator & Base Set



Jeweled Test Indicator Set

SAVE32%

• Automatic reversing • Precision pivot bearings at contact points• Meets federal specs for accuracy• Trigger response to lightest pressure• White dial• .030" range• .0005" grad. • 0-15-0 dial readingsIncludes: 5⁄32" and 3⁄8" diameter posts, dovetail clamp, .080" diameter point in fi tted case.



SAVEUP TO

27%

Horizontal “Quick-Set” Test Indicator SetsAnti-Magnetic

All sets include:• Test indicator with .078"

carbide contact point• 3⁄8" dovetail • Stem nut

Complete sets also include:• 5⁄32" dovetail • Square arm • Swivel clamp for stems• .039 and .118" contact points

Starting At

$95 Meas. Grad- Dial Basic Sets Mfr’s Sale Complete Sets Mfr’s Sale Range uation Reading Mfr’s # Model # List Price Mfr’s # Model # List Price .008" .0001" 0-4-0 513-403 KN606-4767 $165.00 $119.00 513-403T KN606-4752 $193.00 $145.00 .030 .0005 0-15-0 513-402 KN606-4750 127.00 95.00 513-402T KN606-4751 150.00 110.00 .030 .0005 0-15-0 513-412 KN606-4770 181.00 135.00 513-412T KN240-0102 210.00 155.00

SAVEUP TO32%

Magnetic Base with Indicator

• Zinc die-cast housing• Six different locations for mounting accessories:

—3 positions 1⁄4"-20 for lug mounts —1 tapped hole 10-32—1 reamed hole 3⁄8" diameter—1 V-shaped hole in back: 1⁄8 to 5⁄16"

• Base: 41⁄2 x 1 x 11⁄4" • Dial indicators are .001" graduation,

AGD 2, 0-100 reading Reg. Sale Description Model # Price Price Mag Base Only KN625-0440 $16.19 $10.95 Base Mag w/1" Import Dial Indicator KN505-1852 26.37 19.95

• A universal magnetic base that will save time and improve accuracy

• Strong magnet with 45 lbs. of holding power




























READY TO SHIP! Indicators

SAVE55%

Granite Surface Comparator StandWith Fine Adjustment

Premium Quality Stand• Base 2" thick x 6" square• .00005" fl atness • 71⁄4" high Dial Indicator• AGD 2 • 1.000" meas. range • 29⁄32" dial dia.• 0-100 dial read. • .001" grad.

Includes BONUS Dial Indicator!




$13995Mfr’s List: $223.10

For accurate component centering and positioning in most machining applications.• Can be used at any angle and the dial remains

stationary during the rotation of the machine spindle

Special features:• 67⁄8" overall length• 3⁄8" shank diameter, 7⁄8" shank length• Feeler lengths up to 6"• .0005" graduations• 1⁄8" probe ball diameter

Includes:Indicator, internal and external feelers, center point feeler, restraining arm and fi tted caseMfr’s # 52-710-025

2D Coaxial Indicator Set

SAVEOVER

35%

Dial IndicatorsAGD Group 2

• Hard chrome-plated stem, precision ground and lapped • Vertical lug back • Interchangeable hardened chrome point• Hard satin-chrome fi nish • Revolution counter • 0-100 reading • 29⁄32" dial diameter

Measuring Dial Reg. Sale Range Graduation Color Model # Price Price .250" .0010" White KN605-4031 $10.91 $8.99 .500 .0010 White KN605-4051 12.13 9.99 1.000 .0010 White/Yellow KN605-4070 13.62 9.99 1.000 .0010 Black KN605-4080 13.93 8.99 2.000 .0010 White/Yellow KN605-4205 36.21 21.99

As Low As

$899

SAVEUP TO

39%

Dial Mfr’s Sale Face Mfr’s # Model # List Price White 52-520-110 KN890-9824 $84.55 $25.99 Black 52-520-109 KN307-0718 69.40 25.99 Black 52-520-110-1 KN890-9952 82.50 42.99

Features:• 1.000" range • .001" graduation• Continuous reading 0-100• Revolution counter hand • Lug back mountKN890-9952 also includes:• Carbide contact point• Certifi cate of calibration• Solid brass housing

Dial IndicatorsAGD Group 2

Starting At

$2599

SAVEUP TO

69%

• Dial read: 0-15-0• 0 - .060" measuring range• Auto reversal• Jeweled movement

• Easy-to-read tilted dial• 210° swivel arc• 11⁄2" dial dia.• Tungsten carbide .080" point

Extended Range Test Indicators & Set

Indicators include: two dovetail attachments and molded caseSet includes: indicator; contact point and wrench; axial support; adapter sleeve; height gage bar with clamp; universal holder; 3 tungsten carbide points (.040, .080, and .120" dia.); shop hardened case.

Set Only

$149 Individual Indicators Indicator Set Dial Mfr’s Sale Mfr’s Sale Grad. Dia. Mfr’s # Model # List Price Mfr’s # Model # List Price .0005" 1.5" 52-562-001 KN890-9980 $117.55 $99.95 — — .0005 1.0 52-562-002 KN307-2909 117.55 99.95 52-562-110 KN307-3249 $172.65 $149.00 .0010 1.0 52-562-003 KN307-2910 117.55 99.95 — —

SAVEUP TO

46%

KN890-9841 & KN307-3434• 2 Extra contact points 0.040" and 0.120" included

Dial Test Indicators

Starting At

$5995 Meas. Dial Dial Dial Mfr’s Sale Range Grad. Dia. Reading Color Mfr’s # Model # List Price .030" 0.0005" 1" 0-15-0 Black 52-562-778 KN890-9841 $111.95 $59.95 .008 0.0001 1.5 0-4-0 White 52-563-777 KN890-9375 111.95 84.95 .030 0.0005 1.5 0-15-0 Black 52-562-780 KN307-3434 117.05 62.95 .030 0.0010 1.0 0-15-0 White 52-562-774 KN319-3672 105.30 69.95

KN890-9375

KN307-3434

























http://use-enco.com


Over 90,000 PRODUCTS Available Micrometers

Certifi cate of calibration traceable to NIST included.

IP54 Electronic Micrometers & Sets

• Large LCD • Automatic switch off• Resolution: .00005"/.001mm• Supplied in shop-hardened case• IP54 level protection: water,

oil, and fl uid resistant• Carbide measuring faces• Standards included

above 0-1" range

Measuring Mfr’s Sale Range Model # List Price 0-1" KN326-1154 $111.00 $89.95 1-2 KN326-1155 127.15 99.95 2-3 KN326-1156 143.33 119.95 3-4 KN326-1157 164.89 139.95 5-6 KN326-1159 201.53 168.95 Sets 0-3 KN326-1163 373.93 298.95 0-4 KN326-1162 542.78 438.95

Starting At

$8995

0-1" MDC Lite Digimatic Micrometers• Large LCD • Inch/metric conversion• Wide measuring range with hardened and ground anvils • Slimmer design and reduced weight for easier use• Auto power on/off for convenience• Provided with a certifi cate of inspection traceable to NIST• .001mm resolution • ±.00010" accuracy

Thimble Mfr’s Sale Style Mfr’s # Model # List Price Ratchet Stop 293-831 KN319-3769 $131.00 $119.00 Friction 293-832 KN319-3770 135.00 119.00

Micrometer with Ratchet Stop

Your Choice

$119

Meas. Base No. of Mfr’s Sale Range L Rods Model # List Price 0-4" 2.5" 4 KN328-1710 $112.03 $89.95 0-4 4.0 4 KN328-1713 118.82 98.95 0-6 2.5 6 KN328-1711 130.13 103.95 0-6 4.0 6 KN328-1714 145.98 121.95 0-12 2.5 12 KN328-1712 280.33 229.95 0-12 4.0 12 KN328-1715 304.39 239.95

• .001" reading • Interchangeable rods with spherical ends• Ratchet stop • Positive locking clamp• Certifi cate of calibration traceable to NIST included

Depth Micrometers

As Low As

$8995

SAVEUP TO

43%

Digit MicrometersWith Insulated Frames

• .0001" resolution • Carbide measuring faces • Ratchet thimble; locking nut• Sizes over 1" supplied with standards

Meas. Mfr’s Sale Range Model # List Price 0-1" KN325-8100 $88.40 $49.99 1-2 KN325-8101 92.90 59.99

As Low As

$4999

Provides users with higher speeds, quality and stability.• Faster measurement of 2mm per revolution instead of the standard 0.5mm• A patented ratchet thimble mechanism helps ensure repeatability• A function lock helps prevent error • IP65 protection level • Certifi cate of inspection is provided • Signifi cant reduction in positioning time• .00005"/.001mm resolution

QuantuMike™ Coolant-proof Micrometers

Measuring Mfr’s Sale Range Mfr’s # Model # List Price 1-2"/25-50mm 293-186 KN892-0110 $252.00 $209.00 With SPC Output 0-1"/0-25mm 293-180 KN892-0107 256.00 219.00 1-2"/25-50mm 293-181 KN892-0108 293.00 249.00

Starting At

$209• Friction thimble • Easy, snap-fi t rods• Large, easy-to-read LCD • .00005"/.001mm resolution• Direct RS232 output • Automatic switch-off• 4" base: hardened tool steel,

precision ground and microlapped

• Complete in case

6" IP54 ElectronicDepth MicrometerWater & Dust Resistant



Outside Micrometer Sets

As Low As

$3289

• Positive lock and carbide tipped with .0001" graduations• Ratchet thimble• Adjusting wrenches• Fitted case Meas. No. of Reg. Sale

Range Stds. Model # Price Price 0-3" 2 KN600-0003 $36.54 $32.89 0-4 3 KN600-0004 45.52 38.69 0-6 5 KN600-0006 138.95 115.00 0-12 11 KN600-0075 303.49 270.00

SAVEUP TO

15%

0-1" Uni-Mike® Micrometer• Measures hard-to-reach locations • Grads.: .0001" • Friction thimble • Interchangeable fl at and rod anvils • Carbide-tipped spindle face


$169Mfr’s List: $203.00

ions

SAVE16%

44-45 HD 14-09 CIM_MT.indd 4444-45 HD 14-09 CIM_MT.indd 44 8/14/14 9:53 AM8/14/14 9:53 AM




























Online at use-enco.com Measuring Tools

SAVE38%



6" Long PrecisionParallel Set

Set includes 1 pair of each height listed:8 Pairs 1⁄2" Thin • 7⁄8, 1, 11⁄8,

11⁄4, 13⁄8, 11⁄2, 15⁄8, 13⁄4"

• Hardened and ground

• For “zero” and start point fi nding for all three axes (x, y, z)• Made of high-quality steel hardened to RC60, precision

ground on all surfaces• Operates in vertical or horizontal position• Overtravel safety zone in all three axes: x, y—.100", z—.200"• Shank dia.: .750", +.0000"-.0002" • Probe dia.: -.200", ±.0001"• Repeatability: ±.0005" • Uses 4 EverReady A76 batteries (included)

3-Dimensional Sensor (x, y, z) - “Signal Lite”



SAVE45%

Depth SetterSets Z Depths Quickly & Accurately

• Lower cutting tool toward Tool Set –indicator will light up on contact

• Can be operated directly off table or from machine vise

• Aluminum contact face eliminates carbide chipping on cutting tools

• Repeatability: .0002"• Block dimensions: 1 x 2 x 3" • Batteries included


$4995Mfr’s List: $91.45

• Used for inch nut and bolt sizes

• Thread sizes are designated with a sticker on each gage

Includes: #6, #8, #10, 1⁄4 thru 1⁄2" gage; metric sizes include M4 thru M12.

Thread Detective Precise Nut & Bolt Thread Identifi er



r

SAVE34%

Machinist Calc™ ProAdvanced Machining Math and Reference Tool

Built-in Drill Size and Thread Tables Save You Time and Steps.• Speeds and feeds• Bolthole pattern layouts• Trigonometric solutions• Right triangle math• 3-wire measurements• Fractional/metric conversionsMfr’s # 4087

Increase your shop’s productivity & profi tability

SAVEOVER

15%Sale Price

Model # KN891-8793


Head Shank Mfr’s Sale Dia. Dia. Style Model # List Price Single .20" 3⁄8" C KN240-0127 $14.50 $11.95 .20 1⁄2 D KN240-0128 15.00 11.95 .50 1⁄2 A KN601-1210 15.00 11.95 Double .20 3⁄8 E KN240-0129 19.00 14.95 .20 1⁄2 E KN240-0130 19.50 15.95 .2; .5 1⁄2 B KN601-1212 19.50 15.95 A EDB C

Edge Finders• Locate work surfaces easily, quickly and accurately• Work with fl at straight edges, shoulders, grooves, round

work, studs, dowels, or center points and scribed lines• Body and contacts are made of tool steel, hardened ground

and lapped to close tolerances for diameter and concentricity

SAVEUP TO

20%Starting At

$1195

Measuring Reg. Sale Range Model # Price Price 6" KN891-6098 $117.44 $59.95 8 KN891-6099 136.10 79.95 12 KN891-6100 153.66 89.95

Dial Height Gages• .001" graduations• Fine adjustment and lock• Shockproof • Stainless steel beam

Starting At

$5995

SAVEUP TO

49%

SAVEOVER

25%• For quickly locating work edges • Hardened and groundIncludes:• Single 1⁄2" diameter shank–.5000" tip• Double end–.5000" and .2000" tip 1⁄2"

diameter shank• Single 3⁄8" diameter shank–.2000" tip• Double end 1⁄2" diameter shank–.2000"

tip with centering point

4 Pc. Edge Finder Set



44-45 HD 14-09 CIM_MT.indd 4544-45 HD 14-09 CIM_MT.indd 45 8/14/14 9:54 AM8/14/14 9:54 AM
















http://use-enco.com

http://use-enco.com


Measuring Tools

46


SAVEOVER

15%

45x Fine Centering ScopeWith Crosshair Reticle

• ±.0001" accuracy • 3" length • 3⁄8" shank dia. • 1⁄8" fi eld of view• 1" working distance

from end of lens mount• 60° eyepiece angle



EZ-View® Flexible & Rigid Rules• Easy-to-view white graduations

on black non-glare surface

Meas. Eng./Met. 3R 4R 5R 16R Mfr’s Sale Range Model # Model # Model # Model # Model # List Price Flexible 6" KN326-1078 KN326-1074 KN326-1075 KN326-1076 KN326-1077 $5.23 $3.49 12 KN326-1083 — KN326-1080 KN326-1081 — 8.66 5.49 18 KN326-1088 KN326-1084 KN326-1085 — — 18.50 11.95 24 KN326-1093 KN326-1089 KN326-1090 KN326-1091 KN326-1092 22.02 14.29 Rigid 6 — KN326-1055 KN326-1056 KN326-1057 KN326-1058 5.87 3.95 12 KN326-1064 KN326-1060 — KN326-1062 KN326-1063 9.73 6.95 18 — KN326-1065 — KN326-1067 KN326-1068 19.26 11.95 24 — KN326-1070 KN326-1071 KN326-1072 KN326-1073 22.77 14.95

SAVEUP TO

38%

As Low As

$349

52 Pc. Precision Gage Ball SetInch

• Chrome steel hardened to 63 RC• Ground and lapped• Grade 24 accuracy—

AFBMA certifi ed• 1 pair each size:

1⁄8 to 1"• Sturdy caseMfr’s # 52-438-766


$5995Mfr’s List: $70.95

4 Pc. Edge Finder Set• Two single-end and two

double-end edge fi nders• Locates work edges

quickly and accurately • All working surfaces

hardened, ground and lapped

SAVEOVER

30%


$2895Mfr’s List: $42.35

Hardened Steel Squares

• Accuracy Class 2• Straight edge• Base and blades are accurately

ground and lapped

• Beam is grooved at inner corner (Rockwell 55)

• Blade lengths are approximate

SAVEUP TO

33%

Blade Base Reg. Sale L L Model # Price Price 31⁄8" 2" KN638-7622 $17.57 $11.95 5 3 KN638-7623 19.36 12.95 63⁄4 4 KN638-7624 23.81 15.95 101⁄2 63/8 KN638-7626 59.66 39.95

As Low As

$1195

Measuring Mfr’s Sale Range Model # List PriceWith Hook 0-6" KN326-1356 $186.48 $109.00 0-8 KN326-1357 216.45 139.00 0-12 KN326-1358 250.86 159.00 Without Hook 0-6 KN328-0938 177.61 99.00 0-8 KN328-0939 205.35 139.00 0-12 KN328-0940 238.66 159.00

Electronic Depth Gages

Certifi cate of calibration traceable to NIST included.• .0005"/.01mm resolution• Accuracy: ±.001"• Linear scale is embedded

in the stainless steel blade• Sliding LCD unit features push-button control

With Hook

Without Hook

As Low As

$99

SAVE29%

12" Combination Square• 12" blade is chrome plated, fully

hardened and tempered, graduated in 8ths, 16ths, 32nds and 64ths

• Square head has level and scriber point• Double indexed protractor is graduated

180˚ in both directions• Case included


$10995Mfr’s List: $150.80

SAVE28%

Steel Protractors

• Used for setting bevels, transferring of angles and many other uses

• Permanently etched graduations from 0° to 180° in opposite directions

• 6" protractor arm • 33⁄8" wide by 2" high head• Supplied in plastic pouch Reg. Sale Head Model # Price Price Half-Round KN240-0304 $9.77 $6.99 Rectangle KN635-6600 9.77 6.99

Half-Round Head

Rectangle Head

Your Choice

$699

46-47 HD 14-09 MT.indd 4646-47 HD 14-09 MT.indd 46 8/14/14 9:56 AM8/14/14 9:56 AM

















































Measuring Tools

47


• 1⁄32" width• Made from high-grade alloy steel,

hardened and ground• Height specifi cations relate to

consistency within each pair. Absolute heights are nominal

• Includes case• 1⁄2-15⁄8 in 1⁄8" increments

6" Long 10 Parallel Set


$125Mfr’s List: $134.50

Accuracy Parallelism: ±.0001" Paired in height: ±.0001" HRC: 50

SAVE43%

4 Pc. Small Hole Gage Set

Flat Bottom Measuring Range 1⁄8" to 1⁄2"• Measures inside diameters or

widths of small shallow holes or slots

• Half-ball construction permits use not accessible with full-ball style into slot or hole

• Simply insert, lock in place, remove and take micrometer measurement

• Vinyl case



SAVEUP TO

36%Digital Protractor & Levels

• Instant LCD of level, tilt, true vertical or any angle in between

• Meas. range: 360° (90° x 4) • Battery included

Mfr’s Sale Description Res. Acc. Model # List Price Protractor ±.1° .1° KN317-0585* $186.95 $118.95 Pro 360 Level ±.1° .1° KN240-0341 262.95 178.00 Pro 3600 w/SPD Level ±.01 .05 KN240-0343 409.65 308.95*No air shipment

Quality Dial Bore Gage SetsWith Dial Indicator

Dial Bore Gage Sets With AGD Series 2 Dial Indicator• 6.4 - 10" measuring range • 16" gaging depth • 6 anvils

.001" GraduationModel # KN325-1305


.005" GraduationModel # KN240-0117


81 Pc. Rectangular Gage Block Sets• Grade 2 & 3 sets include a Certifi cate of Accuracy

traceable to the National Bureau of Standards• Grade AS-2 accuracy: ±.000050"81 Pc. Set • Includes 1 Block .050",

10 Blocks .1000-.1009" in .0001" steps, 49 Blocks .101-.149" in .001" steps, 17 Blocks .150-.950" in .050" steps,4 Blocks 1, 2, 3, 4" in 1.000" steps

• Supplied in a wooden case

g

SAVEUP TO

38%Starting At

$10995 Wt. Grade Economy Reg. Sale Wt. Grade 0 Reg. Sale Lbs. Model # Price Price Lbs. Model # Price Price 7.1 KN630-4115 $177.81 $109.95 6.9 KN630-4124 $451.15 $309.95

• Five different gaging surfaces ideal for checking convex and concave radii

• 1⁄64-1⁄2" measuring range • 1⁄64-17⁄64" x 64ths & 9⁄32-1⁄2" x

32nds graduations• 4" holder with

adjustable nut• Each gage has

radius marked on it • Chrome fi nish

25 Pc. Radius Gage Set



SAVEOVER

50%

SAVE34%

6" Long Precision Parallel Set10 Pairs 1⁄8" Thin

• Hardened and ground Includes 1 pair of each height listed: 1⁄2, 5⁄8, 3⁄4, 7⁄8, 1, 11⁄8, 11⁄4, 13⁄8, 11⁄2, 15⁄8"



81 Pc. Rectangular Gage Block SetCertifi cate of calibration traceable to NIST included.• Size range:

.050 to 4.00" • Shop accuracy

approx. ±.000050"• Includes case • Economy grade


$16595Mfr’s List: $272.94














http://use-enco.com


Measuring Tools

48


SAVE43%

36 Pc. Space Block Set

• For quick-setting stops and setups for lathes, milling machines and drill presses, or wherever accurate spacing is required, e.g. setting sine bars, etc.

• Accuracy: ±.0001" • 3⁄4" diameter, 1⁄4"-28 ID thread • Ground, hardened and lapped • Four connecting screws supplied to form any length desired• Includes case Blocks Included In Set: .050" .100 .106 .125 .180 .600 .060 .101 .107 .130 .190 .700 .0625 .102 .108 .140 .200 .800 .070 .103 .109 .150 .300 .900 .080 .104 .110 .160 .400 1.000 .090 .105 .120 .170 .500 1.000



SAVEOVER

30%

Thread Measuring Wire Set

Measure U.S. threads from 3 to 48 threads per inch and metric threads from .5mm to 6mm pitch.• Wires approximately 3" long • Sizes: .018 to .185"• Measure external threads by

3-wire method• Sizes stamped above each pocketIncludes: Laminated chart compiled from the U.S. standard handbook H28 and plastic case.

16 Sizes • 48 Wires • All 60° Threads


$2195Mfr’s List: $32.60

4 Pair Thin Parallel Set

Precision ground and hardened to 55-60 HRC. Two 1⁄4" holes are provided for mounting. Set workpieces to needed height in vise jaw in seconds. Allows drilling through work near edges without hitting parallels.• 5⁄32" thick; 31⁄2" long • 1⁄2, 5⁄8, 3⁄4 and 7⁄8" widths



Bench Block• V-groove across face

to accommodate round stock

• Hardened and ground with 8 holes 1⁄8 to 5⁄8"

• 3" diameter, 11⁄2" high



SAVEOVER

35%

Electronic Depth Gage• Stainless steel 1" x 0.06" measuring rod • Accuracy: ±0.001" • Resolution: 0.0005"• 0-1"/0-25mm meas. range • Includes Certifi cate of Calibration traceable to NIST• Designed for depth measurements or shoulders, small bores or inside grooves• Zero set at any point for comparison measurement• Base width: 23⁄8" • Large LCD


$4595Mfr's List: $63.59

SAVE31%

Jack Screw Set

• Great for setups and leveling work on planer beds and upright drills

• Lifts 1000 lbs. or more • Range: 21⁄4-33⁄8"


$1195 Regular Price: $17.52

Supplied in matched pairs• Precision ground and case

hardened on all 6 sides• Heat treated and

case hardened to HRC 55-60

Precision1-2-3 BlocksWith 23 Holes



SAVE46%

SAVEUP TO

29%

Magnetic BasesWith Top or Base Mounted Fine Adjustment

• Unique central locking mechanism with spring-loaded bearing • On/off magnet • Models with adjustment on top have universal swivel clamp that holds 3⁄8",

8mm, 6mm dovetail • Models with adjustment on base hold 3⁄8" stem and dovetail

Bottom Top Magnetic Reg. Sale Arm L Arm L Pull Lbs. Model # Price Price Fine Adjustment on Top 4.33" 3.98" 175 KN326-1361* $104.76 $82.95 2.20 2.00 70 KN326-1369 83.80 62.95 5.26 5.24 175 KN326-1366 132.08 105.95 Fine Adjustment on Base 2.20 2.00 63 KN891-5391 101.10 75.95 4.33 3.98 65 KN326-1359 114.77 89.95 5.26 5.24 175 KN326-1364 141.19 99.95*Permanent magnetic

Starting At

$6295
















Measuring Tools

49


Reg. Sale OAL OAW Model # Price Price Single Vee Block 4" 3" KN890-1205 $113.48 $99.95 Pair of Vee Blocks 33⁄16 23⁄8 KN890-1208 174.32 155.95

Layout and inspection tool, ideal for holding round and irregular shapes for scribing, grinding, measuring, machining and testing. The V-blocks can be used either way, up or standing on end. All Vee faces can be energized or de-energized simultaneously by turning control handle. Gunmetal construction of control handles ensures no interference with magnetic fi eld.• Made from fi ne-quality tool steel with precision-ground fi nish• Flatness tolerance of the mounting base: .0003"• Vee grooves are square and parallel with all surfaces within .0004"• Serial numbered in matched pairs, matched overall accuracy .0004"• Powerful magnetic strength of 180 lbs. • 90° vee angle• Capacity range: 3⁄16-23⁄4" • Overall height: 33⁄4"

Magnetic Vee Blocks & PairsSAVE

UP TO

11%

Starting At

$9995

SAVE46%

10 Pc. Angle Block Set

• 3" long x 1⁄4" thick• Angular accuracy:

.0003" per inch 30± arc seconds

• Precision-ground steel• 1° increments to 5°,

5° increments to 30°• Oil-hardened • Includes fi tted case



Minus Plus Tolerance Tolerance Measuring No. of +.0000-.0002" +.0002-.0000" Mfr’s Sale Range Pcs. Model # Model # List Price .011-.060" 50 KN326-1328 KN326-1327 $65.26 $39.99 .061-.250 190 KN326-1330 KN326-1329 141.39 78.99 .501-.625 125 — KN326-1333 250.16 138.00 .626-.750 125 KN326-1336 KN326-1335 271.91 149.00 .751-.832 82 — KN326-1337 388.28 195.00 .833-.916 84 KN326-1340 KN326-1339 416.84 209.00 .917-1.000 84 KN326-1342 KN326-1341 479.65 239.00

Class ZZ Steel Pin Gage SetsRange: .011-1.000"• Use to measure hole sizes, slot widths, calculate

distances between holes or use as GO/NO GO gaging• Class ZZ guaranteed to .0002" tolerance limit

Starting At

$39999

SAVEUP TO

50%

SAVE40%

6 Pc. Telescoping Hole Gage Set5⁄16-6" Measuring Range

• Constant spring tension for uniform contact pressure• Plunger on gage expands in hole to be measured, locks in place and gage is removed

from the hole. Final hole size is obtained by measuring over contacts with a micrometer • Satin-chrome fi nish • Rigid handle with self-centering feature • Contact points are hardened

tool steel and precision ground on the end measuring radius • Supplied in fi tted case



SAVEUP TO

41%

V-Blocks & Clamp Sets

• Sets consist of 2 matched and numbered V-Blocks and 2 clamps• All sides are precision-ground square and parallel to each other• Accurate enough to be used in layout and surface plate work

Economy Sets• Made of hardened and ground tool steel

Capacity Reg. Sale Width Height Length Dia. Model # Price Price 15⁄8" 13⁄8" 13⁄4" 1" KN420-5420 $51.14 $29.95 13⁄4 15⁄8 23⁄4 11⁄2 KN420-5425 80.98 55.95 21⁄2 13⁄4 23⁄4 11⁄2 KN420-5430 90.57 69.95 31⁄2 23⁄4 47⁄8 21⁄8 KN891-5436 177.96 145.95

As Low As

$2595 Reg. Sale Description Width Height Length Cap. Model # Price Price Set of 2 Blocks & 1 Clamp 11⁄2" 11⁄2" 2" 11⁄2" KN422-3390 $41.54 $29.95 Replacement Clamp for KN422-3390 11⁄2 KN422-3388 7.25 4.59 Set of 2 Blocks & 2 Clamps 11⁄4 11⁄4 119⁄22 1 KN422-3391 38.35 25.95

SAVE20%

Pocket-size gage has 22 precision surfaces for specifying and controlling surface fi nishes.

Surface Finish Comparator Gage



Includes lapped, ground, turned and milled specimens, ranging from 2 to 500 microinches. Made to ASA standard B46 2.1955. Dimensions: 5L x 2"W with pouch.

SAVE15%

Electronic Height Offset Gage

• High-sensitivity gage for height offset presetting

• Four highly visible LED lights • Precision ground; HRC 60 • .0002" TIR • Battery included • 1" dia. shank • .310" dia. probe






























http://use-enco.com


Abrasives

50

Shop the 2014 Enco Master Catalog

Coarse Medium Fine X-Fine Reg. Sale Width Thick. Dia. Model # Model # Model # Model # Price PriceOblong 1" 3⁄8" — KN388-4055 KN388-4056 KN388-4057 KN388-4058 $13.70 $10.95Square 1⁄2 1⁄2 — KN388-4060 KN388-4061 KN388-4062 KN388-4063 11.94 9.55Round — — 1⁄4" KN388-4065 — KN388-4067 KN388-4068 6.23 4.95 — — 3⁄8 KN388-4070 KN388-4071 KN388-4072 KN388-4073 7.11 5.65 — — 1⁄2 KN388-4075 KN388-4076 KN388-4077 KN388-4078 9.88 7.89

6" Rubberized Abrasive Blocks & SticksCratex blocks and sticks are excellent for cleaning and polishing metal surfaces, for breaking edges, smoothing away high spots, removing rust, heat marks, tarnish and stain.

As Low As

$495

• 150 grit• Medium cut• Diamond

impregnated • Needle precision• 61⁄4" OAL• 3" LOC• Includes fl at,

round, square, three square, half round, and triangle fi les

10 Pc. Diamond Needle File Set



SAVEUP TO

35% Price Each Type R Type S Less Than Pkg. Dia. Grade Model # Model # Pkg. Qty. Qty. Pkg. Qty.: 50 1" Medium KN317-1453 — $ .50 $ .38 11⁄2 Coarse KN240-3564 KN240-3555 .55 .42 11⁄2 Medium KN240-3565 KN240-3556 .55 .42 11⁄2 Very Fine KN240-3566 KN240-3557 .55 .42 2 Coarse KN240-3567 KN240-3558 .71 .54 2 Medium KN240-3568 KN240-3559 .71 .54 2 Very Fine KN240-3569 KN240-3560 .71 .54 Pkg. Qty.: 25 3 Coarse KN240-3570 KN240-3561 1.27 .91 3 Medium KN240-3571 KN240-3562 1.27 .91 3 Very Fine KN240-3572 KN240-3563 1.27 .91

Quick-Change Surface Conditioning DiscsAluminum Oxide

Type R are interchangeable with Roloc, Lockit, TR, and Type III style. Type S are interchangeable with TS, Socatt, Speedlock and Type II style.

For use with a variety of electric and air-powered tools for deburring, blending, cleaning and fi nishing.• High initial and extended rate of cut• Maintains high-cut rate with light pressure• Most effi cient on ferrous metals where fi nal

fi nish is important

SAVEOVER

20%

• Designed for durability on tougher burs

• 6" wheels have 6000 max. rpm and 8" wheels have 4500 max. rpm

EX2 Deburring WheelsHarder Than EXL

Hole Reg. Sale Size Dia. Material Grade Density Model # Price Price6 x 1⁄2" 1" A/O Medium 8 KN317-1738 $59.01 $45.956 x 1⁄2 1 S/C Fine 8 KN317-1739 59.01 45.956 x 1⁄2 1 S/C Medium 8 KN317-1740 61.38 47.956 x 1 1 A/O Medium 8 KN317-1741 82.61 64.956 x 1 1 S/C Fine 8 KN317-1742 82.61 64.956 x 1 1 S/C Medium 8 KN317-1743 82.61 64.956 x 1 1 S/C Fine 9 KN317-1744 82.61 64.958 x 1 3 A/O Medium 8 KN317-1747 103.31 80.958 x 1 3 S/C Medium 8 KN317-1749 103.31 80.958 x 1 3 S/C Fine 9 KN317-1750 103.31 80.95

SAVEUP TO

54%

6" Diamond-Plated Grinding WheelsFor Grinding Carbide Tools

• Outlasts vitrifi ed wheels 20 to 1 • Never needs dressing • 11⁄4" arbor• Fits Baldor and other popular

carbide bench grinders

3⁄4" Thick x 1" Thick x 1" Face Reg. Sale 3⁄4" Face Reg. Sale Grit Grade Model # Price Price Model # Price Price 100 Coarse KN307-3447 $156.43 $83.99 KN391-5642 $207.68 $93.99 150 Medium KN307-3448 156.43 83.99 KN391-5716 207.68 93.99 220 Fine KN307-3449 156.43 83.99 KN391-5640 207.68 93.99

Starting At

$8399SAVE

UP TO

57%

Type 27 Flap Discs4 1⁄2" Dia.

• 100% zirconia • Recommended for

aggressive use • One-step grinding,

blending and fi nishing of metal

• Layered for cooler grinding and longer life

As Low As

$295

Reg. Sale Grit Model # Price Price 7⁄8" Hole Dia. 24 KN327-9344 $6.70 $2.95 36 KN327-9347 6.70 2.95 40 KN317-1246 6.70 2.95 60 KN327-9362 6.70 2.95 80 KN327-9348 6.70 2.95 120 KN327-9349 6.70 2.95 5⁄8"-11 Hole Dia. 24 KN327-9351 9.37 3.95 36 KN327-9352 9.37 3.95 40 KN327-9353 9.37 3.95 60 KN327-9354 9.37 3.95 80 KN327-9355 9.37 3.95 120 KN327-9350 9.37 3.95

6 Pc. American Pattern Utility File Set

• 4" length of cut • 7" OAL • Wooden handles • Plastic hanging

storage pouchIncludes: Square, half-round, triangular, round, fl at and warding.



SAVEOVER

40%

50-51 HD 14-09 AB.indd 5050-51 HD 14-09 AB.indd 50 8/14/14 10:02 AM8/14/14 10:02 AM






































































Abrasives

51


Hole Arbor Hole Reg. Sale Dia. Dia. Thread Size Grit Model # Price Price 41⁄2" 7⁄8" — 36 KN404-2789 $7.74 $5.95 41⁄2 7⁄8 — 40 KN404-2790 7.74 5.95 41⁄2 7⁄8 — 60 KN404-2791 7.74 5.95 41⁄2 7⁄8 — 80 KN404-2792 7.74 5.95 41⁄2 — 5⁄8"-11 36 KN404-2793 9.52 6.95 41⁄2 — 5⁄8-11 40 KN404-2794 9.52 6.95 41⁄2 — 5⁄8-11 60 KN404-2795 9.52 6.95 41⁄2 — 5⁄8-11 80 KN404-2796 9.52 6.95 5 7⁄8 — 36 KN404-2805 8.91 6.95 5 7⁄8 — 40 KN404-2806 8.91 6.95 5 7⁄8 — 60 KN404-2807 8.91 6.95 5 7⁄8 — 80 KN404-2808 8.91 6.95 5 — 5⁄8-11 36 KN404-2809 11.61 8.95 5 — 5⁄8-11 40 KN404-2810 11.61 8.95 5 — 5⁄8-11 60 KN404-2811 11.61 8.95 5 — 5⁄8-11 80 KN404-2812 11.61 8.95 7 7⁄8 — 36 KN404-2821 14.57 11.95 7 7⁄8 — 40 KN404-2822 14.57 11.95 7 7⁄8 — 60 KN404-2823 14.57 11.95 7 7⁄8 — 80 KN404-2824 14.57 11.95 7 — 5⁄8-11 36 KN404-2825 16.47 12.95 7 — 5⁄8-11 40 KN404-2826 16.47 12.95 7 — 5⁄8-11 60 KN404-2827 16.47 12.95 7 — 5⁄8-11 80 KN404-2828 16.47 12.95

For use on stainless steel and other tough alloys. Made with ceramic grains. Designed to stay cool, while providing rapid cut rate and extended life.• Recommended for aggressive use and

heavy-duty applications

Ceramic Flap Discs - High PerformanceCompact

SAVEUP TO

27%

Max. Low Price Ea. Dia. Thick. Hole rpm Model # Less Than Case Case Qty.Green Corps 3" 1⁄32" 1⁄4" 35,000 KN505-6032 $5.58 $5.30 3 1⁄32 3⁄8 35,000 KN505-6033 5.58 5.30 3 1⁄16 3⁄8 28,000 KN505-6031 5.58 5.30 4 1⁄32 3⁄8 26,250 KN505-6034 6.49 6.17General Purpose 3 1⁄32 3⁄8 25,000 KN990-1148 1.61 1.53 3 1⁄16 3⁄8 25,000 KN990-1149 1.61 1.53

50 Per Case

• High cut rates • Long life • Use on most

materials including fi berglass, stainless steel, mild steel and alloys

General Purpose• Use on a variety of materials• Ideal for cutting sheet metal, frame nails,

clamps and rusted bolts

Cut-Off WheelsGreen Corps™

SAVEUP TO

53%Flat Files

Mill Files

Mill Files• For sharpening mill or

circular saws, draw-fi ling and fi nishing metals

• All sizes tapered slightly in width • Two square edges • Single cut on sides and edges

Flat Files • Flat fi les, which are of rectangular cross

section and have double-cut teeth, arecommonly used by machinists, machinery builders, ship and engine builders

• Used wherever metal must be removed rapidly and fi nish is of secondary importance

• Slightly tapered toward the points in both width and thickness and are cut on both sides

American Pattern Flat & Mill Files

Mfr’s Sale L Model # List Price Bastard 4" KN382-1236 $6.77 $3.39 6 KN382-1238 6.77 3.49 8 KN382-1240 8.15 3.97 10 KN382-1242 10.46 5.09 12 KN382-1244 17.05 8.49 14 KN619-0255 23.04 11.49 16 KN619-0257 32.89 15.99 Second Cut 6 KN382-1246 9.85 4.79 8 KN382-1248 11.06 5.49 10 KN382-1250 14.14 6.99 12 KN382-1252 18.58 9.29 Smooth 4 KN382-1254 10.32 5.09 6 KN382-1256 10.46 5.09 8 KN382-1258 12.30 5.99 10 KN382-1260 15.06 7.49 12 KN382-1262 20.42 10.29 14 KN619-0256 28.24 14.29

Mfr’s Sale L Model # List Price Bastard 4" KN619-0264 $9.53 $4.79 6 KN382-1202 9.99 4.98 8 KN382-1204 12.44 6.19 10 KN382-1206 15.37 7.69 12 KN382-1208 21.05 10.49 14 KN619-0266 29.03 14.49 16 KN619-0269 38.24 19.09 Second Cut 6 KN382-1210 10.60 5.29 8 KN382-1212 13.69 6.79 10 KN382-1214 17.67 8.89 12 KN382-1216 23.81 11.89 14 KN619-0267 33.32 16.59 Smooth 4 KN619-0265 11.83 5.89 6 KN382-1218 12.62 6.39 8 KN382-1220 14.61 7.29 10 KN382-1222 20.68 9.69 12 KN382-1224 26.40 13.19 14 KN619-0268 36.55 18.19

Price Per Pad Pkg. Less Than Pkg. Color Finish Material Mfr’s # Qty. Model # Pkg. Qty. Qty. Lt. Gray Ultra Fine S/C 7448 20 KN505-6134 $1.55 $1.16 Maroon Very Fine A/O 7447 20 KN505-6132 1.28 .96 Maroon Very Fine A/O 8447 20 KN505-6135* 1.65 1.24 Brown Fine A/O 6444 20 KN505-6127 1.61 1.21 Tan Medium A/O 7440 10 KN505-6128 3.85 2.89 Gray Ultra Fine S/C 6448 20 KN510-0415 1.47 1.10 White Super Fine A/O 7445 20 KN505-6130 1.34 1.00 Gray Medium S/C 7446 10 KN505-6131 2.71 1.99 Holder 961 20 KN505-6138 6.51 4.88*Perforated

• Outperforms steel wool, wire brushes and other non-woven hand pads

• Never rusts and can be used with water solvents • 6 x 9"

Hand Pads

• 27⁄8 x 1⁄4"• Fits into

tight areas

Mini Mandrel



SAVE25%In Pkg. Qty.

SAVEUP TO

18% Reg. Sale W Grit Model # Price Price 1" 80, 120, 180 KN337-1068 $34.42 $29.95 1 120, 180, 240 KN337-1069 34.42 29.95 11⁄2 80, 120, 180 KN337-1070 51.62 45.95 11⁄2 120, 180, 240 KN337-1071 51.62 45.95 2 80, 120, 180 KN337-1072 68.84 55.95 2 120, 180, 240 KN337-1073 68.84 55.95

Shop Roll Assortment PacksAluminum Oxide

Three 25 Yd. Rolls in Each Pack• Convenient dispenser pack

with three grits

As Low As

$2995



















































































http://use-enco.com

http://use-enco.com

The RIGHT TOOL at the RIGHT PRICE

Easy, Secure Shopping

The RIGHT TOOL at the RIGHT PRICE

Abrasives

52

Fibre DiscsAluminum Oxide

• Aluminum-oxide grain abrasive on heavy fi bre backing

• Good for small job shops and general-purpose applications

Aluminum Oxide• Best used for economical,

general-purpose grinding, deburring and blending ferrous and nonferrous materials

• High cut rate and durability• For use with pneumatic

and electric power tools and grinders

Arbor Hole Price Each Dia. Size Grit Model # 1-24 25+ 41⁄2" 7⁄8" 24 KN337-7815 $ .72 $ .53 41⁄2 7⁄8 36 KN337-7816 .70 .52 41⁄2 7⁄8 50 KN337-7817 .66 .49 41⁄2 7⁄8 60 KN337-7818 .65 .48 41⁄2 7⁄8 80 KN337-7819 .62 .48 41⁄2 7⁄8 100 KN337-7820 .62 .48 41⁄2 7⁄8 120 KN337-7821 .64 .47 5 7⁄8 24 KN337-7823 .78 .58 5 7⁄8 36 KN337-7824 .77 .57 5 7⁄8 50 KN337-7825 .74 .55 5 7⁄8 60 KN337-7826 .72 .53 5 7⁄8 80 KN337-7827 .70 .52 7 7⁄8 24 KN337-7831 1.05 .77 7 7⁄8 36 KN337-7832 1.02 .76 7 7⁄8 60 KN337-7834 .96 .70 7 7⁄8 100 KN337-7836 .94 .69

Starting At

47¢on 25+

Wheel Density/ Max. Mfr’s Sale Material Grit rpm Model # List Price 6D x 1⁄2W x 1"H A/O 8 Med. 6000 KN505-6160 $50.34 $35.59 S/C 9 Fine 6000 KN505-6165 50.34 35.59 6D x 1W x 1"H A/O 8 Med. 6000 KN505-6161 70.48 49.89 S/C 8 Fine 6000 KN505-6163 70.48 49.89 S/C 9 Fine 6000 KN505-6166 70.48 49.89 S/C 8 Med. 6000 KN990-1147 70.48 51.95 8D x 1W x 3"H A/O 8 Med. 4500 KN505-6162 88.14 62.29 S/C 8 Fine 4500 KN505-6164 88.14 58.95 S/C 9 Fine 4500 KN505-6167 88.14 59.95

SAVEUP TO

33%

EXL Deburring WheelsConvolute

• Silicon carbide or aluminum oxide

Starting At

$3559

SAVEUP TO

39%Qty.: 25+

Fibre Backed Discs Aluminum Sale Sale Oxide Price Each Zirconia Price Each Grit Model # 1-24 25+ Model # 1-24 25+ 4" Dia., 5⁄8" Hole 24 KN391-6002 $ .58 $ .49 KN391-2950 $ .88 $ .59 36 KN391-6003 .54 .49 KN391-2951 .72 .49 50 KN391-6004 .54 .39 KN990-1327 .64 .49 60 KN391-6005 .48 .29 KN391-2952 .64 .49 80 KN391-6006 .45 .29 KN990-1329 .57 .39 41⁄2" Dia., 7⁄8" Hole 24 KN391-6102 .64 .49 — 36 KN391-6103 .62 .49 KN391-6602 .95 .79 50 KN391-6104 .58 .39 KN391-6603 .95 .79 60 KN391-6105 .58 .39 KN391-6604 .84 .59 80 KN391-6106 .55 .39 KN391-6605 .79 .59 100 KN391-6107 .55 .39 — 120 KN391-6108 .55 .39 — 5" Dia., 7⁄8" Hole 24 KN391-6202 .63 .39 KN990-1331 .95 .69 36 KN391-6203 .57 .49 KN391-6702 .95 .69 50 KN391-6204 .57 .39 KN391-6703 .80 .59 60 KN391-6205 .57 .49 KN391-6704 .80 .59 80 KN391-6206 .56 .39 KN391-6705 .80 .59 100 KN391-6207 .56 .39 — 120 KN391-6208 .56 .39 — 7" Dia., 7⁄8" Hole 24 KN391-6302 .87 .59 KN391-6801 1.41 1.09 36 KN391-6303 .85 .59 KN391-6802 1.35 .99 50 KN391-6304 .85 .59 KN391-6803 1.25 .89 60 KN391-6305 .77 .59 KN391-6804 .95 .89 80 KN391-6306 .73 .49 KN391-6805 .95 .89

As Low As

29¢Each Qty.: 25+

Aluminum Oxide• Resin bond, fi bre backing • For weld removal, blending

and fi nishing on all ferrous metals• Long lasting, aggressive

cutting, fi rst qualityZirconia• Self-sharpening zirconia alumina offers

superior performance on all metals, including stainless steel and other tough alloys

• Resists loading, giving longer grinding life for heavy-duty stock removal

Diamond Straight Wheels

• All wheels consist of the highest quality diamond content• Resin bonded; 100% concentration• 1⁄8" Depth (X)/100 diamond concentration• Type D1A1 with diamonds in periphery • 1⁄16" depth • 11⁄4" hole

Starting At

$6999ole

SAVEUP TO

28% Dia. Width Coarse Reg. Sale Medium Reg. Sale Fine Reg. Sale D T Model # Price Price Model # Price Price Model # Price Price 4" 1⁄4" KN317-1538 $97.58 $69.99 KN317-1539 $97.58 $69.99 KN317-1540 $97.58 $69.99 6 1⁄8 KN317-1545 103.48 74.99 KN317-1546 103.48 74.99 KN317-1547 103.48 74.99 6 1⁄4 KN317-1548 148.00 107.99 KN317-1549 148.00 107.99 KN317-1550 148.00 107.99 6 1⁄2 KN317-1551 171.73 124.99 KN317-1552 171.73 124.99 KN317-1553 171.73 124.99 7 1⁄4 KN317-1554 142.96 103.99 KN317-1555 142.96 103.99 KN317-1556 142.96 103.99 7 3⁄8 KN317-1557 163.96 119.99 KN317-1558 163.96 119.99 — 7 1⁄2 KN317-1559 174.13 126.99 KN317-1560 174.13 126.99 —

SAVEUP TO

22%In Pkg. Qty.

Zirconia Alumina & Aluminum Oxide Flap DiscsType 29

• Hole dia.: 7⁄8" • Use on portable disc

grinders and sandersAluminum Oxide• Use for weld removal, blending,

fi nishing and deburring on all ferrous metals

• General-purpose sanding and grinding

Zirconia Alumina• Use on stainless steel and other

tough metals for heavier stock removal and increased durability

Zirconia Aluminum Alumina Oxide Sale Price Each Dia. Grit Model # Model # 1-9 10+ 41⁄2" 24 KN391-7240 KN391-7200 $3.79 $2.95 41⁄2 40 KN391-7242 KN391-7202 3.79 2.95 41⁄2 60 KN391-7244 KN391-7204 3.79 2.95 41⁄2 80 KN391-7246 KN391-7206 3.79 2.95 41⁄2 120 KN391-7248 KN391-7208 3.79 2.95 7 36 KN240-3611 — 7.99 6.65 7 60 KN240-3612 — 7.99 6.65 7 80 KN240-3613 — 7.99 6.65 7 120 KN240-3614 — 7.99 6.65

As Low As

$295Each Qty.: 10+







































































































PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com


PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com

Abrasives

53

SAVE37%

On SetCobalt Blades

Sale Price Each Style Model # 1-49 50-99 100-499 500+ B10S KN422-0003 $1.97 $1.49 $1.29 $1.09 E100S KN422-0002 2.53 1.89 1.69 1.39

Remove burs and spiral chips from holes, slots, and straight edges on tough jobs involving steel, stainless steel, aluminum and plastic.Includes: • Blue Glo-Burr B & E handles• 10 each B10S and E100S cobalt blades

22 Pc. Cobalt Deburring SetWith 2 Glo-Burr Handles & 20 Cobalt Blades



*Extra close †Long reach

Blade No. of Reg. Sale Type Pcs. Set Contents Model # Price Price Model B B10S 11 (10) B10S Cobalt Blades KN337-1050* $25.40 $12.95 B10S 12 Holder B, (10) B10S Cobalt Blades KN337-1051† 31.77 14.95 Model E E100S 11 (10) E100S Cobalt Blades KN337-1054* 26.47 14.95 E100S 12 Holder E, (10) E100S Blades KN337-1055† 36.44 15.95

Mango II Bonus PacksIncludes Bonus Mango II Handle

Bonus Packs for Extra-Close Applications

Bonus Packs for Long-Reach Applications

As Low As

$1295

Hand Wire Brushes

Curved HandleScratch Brush

Small Cleaning Scratch Brush

The blocks of all Osborn scratch brushes are kiln-dried hardwood for maximum tuft retention even in severe applications. The smooth machined fi nish provides excellent comfort and a hang-up hole is provided for the most widely used styles. Densely fi lled for longer wear and more effi cient material removal.

Shoe Handle Scratch Brush

Brush No. of Brush Price Each Material Rows L OAL Model # 1-5 6+Emro® Economy Shoe Handle Scratch Brush Stainless Steel 4 x 16 51⁄4" 10" KN619-0747 $4.14 $3.06Curved Handle Scratch Brush Carbon Steel 4 x 19 6 1311⁄16 KN619-0725 3.29 2.43 Stainless Steel 3 x 19 6 1311⁄16 KN619-0726 4.72 3.49Small Cleaning Scratch Brush Stainless Steel 3 x 7 17⁄16 73⁄4 KN619-0731 3.61 2.67

SAVE25%Qty.: 6+

Pkg. Low Grit Qty. Model # Price1 x 30" 60 50 KN337-0404 $1.33 80 50 KN337-0405 1.33 100 50 KN337-0406 1.25 120 50 KN337-0407 1.25 180 50 KN337-0408 1.24 240 50 KN385-7240 1.24 320 50 KN385-7320 1.241 x 42" 36 50 KN337-0409 1.43 40 50 KN337-0410 1.43 50 50 KN337-0411 1.43 60 50 KN337-0412 .94 80 50 KN337-0413 .94 100 50 KN337-0414 .94 120 50 KN337-0415 .94 150 50 KN337-0416 1.17 180 50 KN337-0417 1.17 220 50 KN337-0418 1.17 240 50 KN337-0419 1.17 320 50 KN337-0420 1.172 x 48" 40 20 KN337-0438 2.16 50 20 KN337-0439 2.16 60 20 KN337-0440 1.86 80 20 KN337-0441 1.68 100 20 KN337-0442 1.59 120 20 KN337-0443 1.59 150 20 KN337-0444 1.59 180 20 KN337-0445 1.594 x 36" 60 20 KN337-0539 3.09 80 20 KN337-0540 3.02 100 20 KN337-0541 2.76 120 20 KN337-0542 2.76 150 20 KN337-0543 2.76 180 20 KN337-0544 2.766 x 48" 36 10 KN337-0568 6.99 40 10 KN337-0569 6.51 50 10 KN337-0570 6.38 60 10 KN337-0571 5.51 80 10 KN337-0572 5.00 100 10 KN337-0573 4.80 120 10 KN337-0574 4.80

Aluminum Oxide Sanding Belts

• Resin-bonded sanding belts have X-weighted backing with break-resistant joints

• Use for grinding, deburring and blending ferrous and nonferrous metals

As Low As

94¢

SAVEUP TO

25%In Pkg. Qty.

Sale Price Each Pkg. Less Than Pkg. D Grit Color Qty. Model # Pkg. Qty. Qty. 2" Coarse Brown 50 KN505-6242 $1.21 $ .91 2 Medium Maroon 50 KN505-6245 1.21 .91 2 Very Fine Blue 50 KN505-6248 1.21 .91 2 Super Fine Gray 50 KN505-6251 1.21 .91 3 Coarse Brown 25 KN505-6243 2.32 1.74 3 Medium Maroon 25 KN505-6246 2.32 1.74 3 Very Fine Blue 25 KN505-6249 2.32 1.74 3 Super Fine Gray 25 KN505-6252 2.32 1.74

• For heavy deburring, cleaning and fi nishing

• Locks with a half twist • Available in package

quantity only

Roloc™ Surface Conditioning Discs

As Low As

91¢Each In Pkg. Qty.

Disc Pads And Shaft Disc Pad Max. Reg. Sale Dia. Hardness rpm Model # Price Price 2" Medium 25,000 KN505-6258 $17.60 $12.95 3 Medium 18,000 KN505-6260 21.46 14.95 1⁄4" Threaded Shaft KN505-6261* 2.53 1.95

Accessories

*Not 3M
































































http://use-enco.com

http://use-enco.com


Raw Materials

54

It’s IN STOCK and

SAVEUP TO

27%On Qty.: 4+

Sale Price Each OD Model # 1-3 4+ 1⁄2" KN505-3764 $10.93 $7.99 5⁄8 KN505-3765 15.97 11.99 3⁄4 KN505-3766 19.67 14.99 7⁄8 KN505-3898 25.98 19.99 1 KN505-3767 25.98 19.99 11⁄8 KN505-3899 39.98 30.99 11⁄4 KN505-3768 45.98 35.99 13⁄8 KN505-3900 55.98 43.99 11⁄2 KN505-3769 62.98 48.99 13⁄4 KN505-3902 79.98 62.99 2 KN505-3770 101.98 79.99 21⁄4 KN505-3892 133.98 105.99 21⁄2 KN505-3893 160.98 127.99 3 KN505-3894 215.98 171.99 31⁄2 KN505-3903 272.98 216.99

Solid Alloy Bronze Round Rods13" Lengths• SAE 660 (CDA 932)

As Low As

$799Each Qty.: 4+

SAVEUP TO

31%On Qty.: 4+

Thick. Sale Price Each H x W Model # 1-3 4+ 1⁄8 x 1" KN505-3672 $7.76 $5.79 1⁄8 x 2 KN505-3673 14.62 11.19 1⁄4 x 1 KN505-3674 14.62 10.79 1⁄4 x 11⁄2 KN505-3675 16.47 13.89 1⁄4 x 2 KN505-3676 26.20 21.69 1⁄4 x 3 KN505-3677 34.55 27.99 1⁄4 x 4 KN505-3678 45.80 38.99 1⁄4 x 5 KN325-4295 54.68 45.69 1⁄4 x 6 KN325-4308 81.21 55.79 3⁄8 x 1 KN891-6138 20.80 15.39 3⁄8 x 11⁄2 KN505-3679 27.90 21.09 3⁄8 x 2 KN505-3680 34.55 28.79 3⁄8 x 3 KN505-3681 49.16 40.99 3⁄8 x 4 KN505-3682 62.40 51.99 1⁄2 x 1⁄2 KN505-3664 14.27 11.99 1⁄2 x 1 KN505-3683 26.20 19.59 1⁄2 x 11⁄2 KN505-3684 34.55 28.89 1⁄2 x 2 KN505-3685 44.87 37.99 1⁄2 x 3 KN505-3686 62.35 49.19 1⁄2 x 4 KN505-3687 74.11 61.99 1⁄2 x 6 KN505-3688 102.00 84.99 5⁄8 x 11⁄2 KN505-3689 42.89 35.99 5⁄8 x 2 KN240-2392 55.78 46.49

• Alloy 6061• Good corrosion resistance• Tolerance: ±1⁄4"

Aluminum Rectangles6' Lengths

As Low As

$579Each Qty.: 4+

SAVEUP TO

35%On Qty.: 4+

• Alloy 6061 • Corrosion

resistant

Aluminum Round Rods6' Lengths

As Low As

$299Each Qty.: 4+

Sale Price Each Sale Price Each Dia. Model # 1-3 4+ Dia. Model # 1-3 4+ 3⁄16" KN505-3643 $4.19 $2.99 11⁄8" KN505-3652 $36.41 $25.99 1⁄4 KN505-3644 6.72 4.99 11⁄4 KN505-3653 42.94 31.99 5⁄16 KN505-3645 9.29 5.99 13⁄8 KN505-3654 49.81 36.99 3⁄8 KN505-3646 9.42 6.99 11⁄2 KN505-3655 54.70 39.99 7⁄16 KN240-2609 14.07 9.99 15⁄8 KN240-2610 64.21 46.99 1⁄2 KN505-3647 13.74 9.99 13⁄4 KN505-3656 71.08 52.99 5⁄8 KN505-3648 14.49 9.99 2 KN505-3657 92.84 67.99 3⁄4 KN505-3649 20.22 14.99 21⁄4 KN505-3658 117.48 86.99 7⁄8 KN505-3650 24.20 17.99 21⁄2 KN505-3659 142.51 105.99 1 KN505-3651 30.11 21.99 3 KN505-3660 201.11 148.99

SAVEUP TO

29%On Qty.: 4+

Sale Price Each ID x OD Model # 1-3 4+ 1⁄2 x 1" KN505-3771 $26.98 $19.99 1⁄2 x 11⁄4 KN240-2479 44.98 33.69 1⁄2 x 11⁄2 KN505-3896 60.98 45.69 5⁄8 x 1 KN240-2480 23.66 17.69 5⁄8 x 11⁄4 KN510-1879 40.98 29.99 3⁄4 x 1 KN510-1882 18.23 12.99 3⁄4 x 11⁄4 KN505-3772 35.98 26.98 3⁄4 x 11⁄2 KN240-2475 56.98 42.69

Cored Bronze Rounds13" Lengths

• SAE 660 (CDA 932)• Ideal for general-utility

bearings and bushings• High-quality, rough

machine-fi nished stock Sale Price Each ID x OD Model # 1-3 4+ 3⁄4 x 21⁄2" KN510-1874 $141.98 $106.39 7⁄8 x 11⁄4 KN510-1881 29.98 22.39 1 x 11⁄4 KN240-2476 23.47 17.59 1 x 11⁄2 KN505-3773 43.98 32.98 1 x 13⁄4 KN505-3897 65.98 49.39 1 x 2 KN505-3774 88.98 66.69 11⁄4 x 13⁄4 KN240-2477 53.98 40.39 11⁄4 x 2 KN505-3775 86.98 64.99 11⁄4 x 21⁄2 KN510-1883 152.98 114.69 11⁄2 x 2 KN505-3776 64.98 48.69 11⁄2 x 21⁄2 KN240-2478 135.98 101.98 13⁄4 x 21⁄2 KN240-2481 112.98 84.69 2 x 21⁄2 KN240-2482 83.98 62.98 2 x 23⁄4 KN240-2483 124.98 93.69 2 x 3 KN240-2484 170.98 127.99

As Low As

$1299Each Qty.: 4+

Reg. Sale Pkg. Price Price Dia. Qty. Model # Per Pkg. Per Pkg. Chrome 1⁄16" 100 KN240-2420 $6.53 $4.29 3⁄32 100 KN240-2421 4.91 3.29 1⁄8 100 KN240-2422 3.26 2.19 5⁄32 100 KN240-2423 3.55 2.29 3⁄16 100 KN240-2424 3.59 2.39 7⁄32 100 KN240-2425 4.20 2.79 1⁄4 100 KN240-2426 4.91 3.29 5⁄16 100 KN240-2427 6.43 4.29 3⁄8 100 KN240-2428 11.04 7.39 1⁄2 100 KN240-2429 16.16 10.79 5⁄8 50 KN240-2430 16.98 11.29 3⁄4 25 KN240-2431 13.62 10.99 1 10 KN240-2432 15.06 10.09 2 1 KN240-2433 22.38 15.00 Carbon 1⁄8 500 KN240-2434 2.38 1.49 3⁄16 250 KN240-2435 2.53 1.59 1⁄4 250 KN240-2436 3.73 2.39 5⁄16 250 KN240-2437 6.48 4.29 3⁄8 100 KN240-2438 6.83 6.09 1⁄2 100 KN240-2439 9.55 6.29 5⁄8 100 KN240-2440 17.49 11.59 3⁄4 50 KN240-2441 17.79 11.79 1 25 KN240-2442 17.93 13.99

Steel Balls

Chrome• Widely used in precision ball bearings• Excellent surface quality• Through hardened• High hardness and high

load-bearing capacity

Sold In Package Quantities Noted, Minimum Order = 1 package

SAVEUP TO

37% As Low As

$149Per Pkg.

Specifi cations Chrome Carbon Grade: 25 1000 Diameter Deviation: ±.0001" ±.005" Sphericity: .000025" .001" Hardness: 60-67C 60-65C

54-55 HD 14-09 RM.indd 5454-55 HD 14-09 RM.indd 54 8/14/14 10:15 AM8/14/14 10:15 AM










































































































Raw Materials

55

READY TO SHIP!

SAVE15%

On Qty.: 4+

*1' length

Sale Price Each Dia. Model # 1-3 4+ 1⁄8" KN505-3712 $3.74 $3.18 5⁄32 KN240-2611 6.15 5.23 3⁄16 KN505-3713 7.62 6.48 7⁄32 KN240-2612 10.80 9.18 1⁄4 KN505-3714 12.24 10.40 9⁄32 KN240-2613 14.59 12.40 5⁄16 KN505-3715 17.92 15.23 3⁄8 KN505-3716 25.56 21.73 7⁄16 KN505-3717 32.92 27.98 1⁄2 KN505-3718 42.08 35.77 9⁄16 KN505-3719 49.84 42.36

Sale Price Each Dia. Model # 1-3 4+ 5⁄8" KN505-3720 $61.68 $52.43 3⁄4 KN505-3721 82.37 70.01 25⁄32 KN505-3722 84.52 71.84 1 KN505-3723 103.85 88.27 11⁄8 KN505-3724 168.23 143.00 11⁄4 KN505-3725 199.96 169.97 13⁄8 KN505-3726 240.00 204.00 11⁄2 KN505-3727 278.49 236.72 15⁄8 KN505-3728 323.03 274.58 2 KN505-3729 474.61 403.42 3 KN505-3730* 274.41 233.25 4 KN505-3731* 498.94 424.10

Brass Round Rods6' Lengths

• Alloy 360 • Readily soldered

and brazed• Easily machined

As Low As

$318Each Qty.: 4+

SAVEUP TO

52%

Stainless Steel Tool Wrap

Reg. Sale Size Model # Price Price Type 321 20" x 50' KN326-1521 $195.98 $95.00 20 x 100 KN326-1520 376.87 189.00 Type 309 20 x 50 KN326-1516 251.25 119.00 20 x 100 KN326-1515 492.45 259.00

• Folds and crease-seals with ease for an airtight envelope for heat treating

• Eliminates decarburization and scales • No special controls or atmosphere furnace required • .002" thicknessType 321–High Titanium• For temperatures up to 1800°FType 309–High-Temperature• For temperatures up to 2100°F

As Low As

$95

SAVEUP TO

52%

15 Pc. Shim Assortments6 x 12" Steel or Brass

15 sizes—1 piece each: .001, .0015, .002, .003, .004, .005, .006, .007, .008, .010, .012, .015, .020, .025 & .031"

Reg. Sale Description Model # Price Price Steel KN406-0288 $39.92 $19.95 Brass KN406-0290 76.32 35.95

As Low As

$1995SAVE

UP TO

70%

• Right-hand thread • Repair lathes,

mills, vises, etc.

Acme Threaded Rod & NutsOil Finish

As Low As

$149

Size & Acme Nuts Sale 3' Lengths Sale 6' Lengths Sale Pitch Model # Price Model # Price Model # Price 3⁄8"-12 KN328-1105 $1.49 KN890-9838 $3.99 KN890-9839 $5.99 1⁄2-10 KN407-2200 1.69 KN408-0200 5.99 KN408-0220 9.39 5⁄8-8 KN407-2202 1.99 KN408-0202 6.49 KN408-0222 18.29 5⁄8-6 KN407-2204 2.49 KN408-0204 11.29 KN408-0224 21.99 3⁄4-6 KN407-2206 2.59 KN408-0206 9.99 KN408-0226 16.99 7⁄8-6 KN407-2208 3.79 KN408-0208 12.99 KN408-0228 25.99 1-5 KN407-2210 4.19 KN408-0210 16.99 KN408-0230 29.99 11⁄8-5 KN407-2212 5.29 KN408-0212 19.99 KN408-0232 35.99 11⁄4-5 KN407-2214 6.59 KN408-0214 29.95 KN408-0234 52.99 11⁄2-4 KN407-2216 12.39 KN408-0216 59.95 KN408-0236 99.99

SAVEUP TO

39%On Qty.: 4+

Drill RodWater & Oil Hardening 3' Lengths

• Fine grain, fully spheroidizedWater Hardening • 100% decarb-free, commercial-grade tool steel • High-carbon content allows

for use without heat treatmentOil Hardening • Non-shrinking tool steel with

excellent abrasion resistanceand machinability

As Low As

$127Each Qty.: 4+

Tolerances Water Oil Diameter: 3⁄16 to 11⁄4" 11⁄2 to 2" Section: ±.001" ±.001" Concentricity: .0005" .00075" Length: +1⁄8/.00" +1⁄8/.00"

Water Hard. Sale Price Ea. Oil Hard. Sale Price Ea. Dia. Model # 1-3 4+ Model # 1-3 4+ 1⁄8" — KN408-0005 $1.41 $1.27 3⁄16 — KN408-0009 2.05 1.83 1⁄4 KN409-0013 $2.48 $1.85 KN408-0013 2.36 2.12 5⁄16 KN409-0017 3.37 3.03 KN408-0017 3.26 2.93 3⁄8 KN409-0021 4.74 3.54 KN408-0021 5.41 4.50 7⁄16 KN409-0025 6.43 4.57 KN408-0025 6.25 5.64 1⁄2 KN409-0029 7.74 4.73 KN408-0029 8.32 6.91 5⁄8 KN409-0037 10.94 7.78 KN408-0037 11.90 10.70 3⁄4 KN409-0045 15.45 11.00 KN408-0045 18.09 13.22 7⁄8 KN409-0053 23.17 16.47 KN408-0053 25.04 22.52 1 KN409-0061 26.96 19.17 KN408-0061 28.32 25.47 11⁄8 KN409-0069 37.56 26.72 KN408-0069 39.45 35.49 11⁄4 KN409-0077 45.70 32.51 KN408-0077 46.21 41.56 11⁄2 KN409-0093 60.49 43.04 KN408-0093 65.91 59.29 2 — KN505-0239 116.15 104.49

SAVEUP TO

33%

Acetal Rods4' Lengths

• Easily machined • Makes pump and valve

components, gears & bearings • Wear and moisture resistant • High-tensile strengthNatural—High natural lubricityBlack—Normal lubricity

Natural Reg. Sale Black Reg. Sale Dia. Model # Price Price Model # Price Price 1⁄4" KN240-2568 $2.46 $1.65 KN240-2581 $2.42 $2.29 5⁄16 KN325-4566 3.20 2.14 KN325-4573 3.60 2.41 3⁄8 KN240-2570 4.09 2.74 KN240-2582 4.12 2.76 1⁄2 KN891-6534 7.17 4.80 KN240-2584 7.04 4.99 5⁄8 KN891-6536 10.32 6.91 KN240-2585 10.74 7.29 3⁄4 KN891-6538 12.32 8.25 KN240-2587 13.57 9.29 7⁄8 KN325-4570 18.58 12.45 KN325-4579 20.66 14.59 1 KN891-6540 22.22 14.89 KN240-2589 24.62 17.99 11⁄4 KN891-6542 33.49 22.44 KN240-2591 38.35 28.75 11⁄2 KN891-6544 47.04 31.99 KN240-2593 49.50 33.99 2 KN891-6546 79.49 54.99 KN240-2596 84.06 63.05 21⁄4 KN891-6548 104.38 78.29 KN890-9837 110.08 82.55

Starting At

$165

54-55 HD 14-09 RM.indd 5554-55 HD 14-09 RM.indd 55 8/14/14 10:15 AM8/14/14 10:15 AM























































































http://use-enco.com


























Fluids

56

Over 90,000 PRODUCTS Available

Price Each Case Less Than Case Description Size Qty. Model # Case Qty. TRIM® E206 1 gal. Jug 4 KN319-3910 $28.49 $25.00 TRIM® E206 5 gal. Pail 1 KN319-3911 — 119.00 TRIM® SOL 1 gal. Jug 4 KN319-3899 26.95 23.95 TRIM® SOL 5 gal. Pail 1 KN319-3900 — 115.00

TRIM® Metalworking Fluids

E206 Soluble Oil• Designed as a general-purpose, multi-metal

coolant for general machining of ferrous and nonferrous metals

• EP additive controls built-up edge• Fine-emulsion particle size reduces carry-off

and facilitates getting fl uid to point of cut• Leaves a fl uid, oily, non-gumming fi lm SOL® Heavy-Duty Soluble Oil• Excellent for the machining of aluminum

and aluminum alloys• Leaves a fl uid residue that will not

varnish up• Wide applications range from 3 to 25%

As Low As

$2395Ea. In Case Qty.

SAVEUP TO

40%

Reg. Sale Description Size Model # Price Price No. 1 5 gal. KN893-2096 $140.89 $84.00 No. 2 1 gal. KN505-1987 26.02 18.00 5 KN505-1988 105.80 85.00 No. 3 5 gal. KN328-1135 105.61 93.00 No. 4 1 gal. KN505-1989 26.02 18.00 5 KN505-1990 107.77 85.00

For all combinations of cast iron, steel and nonmetallic way materials on small-to-medium machine tools; fl ood application in large machines.• Additives eliminate stick-slip and chatter

under thin-fi lm lubrication conditions; allows smooth, uniform motion even at low table speeds

• Contains no Class 1 ozone-depleting chemicals

Vactra® No. 1, 2, 3 & 4 Way Oil

As Low As

$18

SAVE20%Delivers extended sump life versus previous generation semisynthetics.

• Dramatically extends useful life without the need for tank-side biocides or fungicides

• Compatible with a very wide range of material, including cast iron, steels, copper, titanium and aluminum alloys, and many plastics and composites

• Optimized combination of cooling and lubricity for titanium machining applications

• Provides superior corrosion inhibition on cast iron and eliminates “hot chip” and clinkering problems

• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys

• Contains no nitrites, triazines, phenols, chlorinated or sulfurized EP additives

Reg. Sale Size Model # Price Price 1 gal. KN404-3030 $33.92 $26.95 5 KN404-3031 151.39 119.00

TRIM® MicroSol® 585XTExtended-Life, Nonchlorinated Semisynthetic

Performs ExtremelyWell On All

Metals!

Cutting & Tapping Fluid

• For use on all metals, including aluminum, stainless steel, Inconel and titanium

• May be used straight or as an additive to enhance inexpensive cutting oils

Contains no 1,1,1-Trichloroethane, methylene chloride, sulfur or chlorine — Safe for the ozone layer

Price Each Case Less Than Case Size Qty. Model # Case Qty. 4 oz. Spout Top 24 KN319-3896 $2.64 $1.99 16 oz. Aerosol 12 KN319-3897* 14.04 9.99 1 pt. Can 12 KN891-4158 9.13 6.49 1 gal. Can 2 KN505-1978 54.65 38.98 5 gal. Pail 1 KN505-2032 159.00*No air shipment

Oak Signature Reg. Sale Model No. Model # Price Price DSY 4100 KN893-1987 $85.30 $79.39 DSS 700 KN893-1986 105.94 98.69 DSS 800 KN893-1985 126.46 117.79 DSS T-TECH KN893-1984 117.84 109.75

Metalworking Fluids5 Gallon Pails

OAKWASH® DSC AL • Recommended for cleaning individual machine and

central system reservoirs, metalworking fl uid lines, premix tanks, machines and parts

• Improves rancidity control• Removes insoluble soaps from dirty central systems

in hard water areas. Does not redeposit soil• Can also be used at 4% to 5% for aluminum quenching• Thoroughly removes chip deposits and tramp oil• Protect machines and parts, both ferrous and nonferrous, from rusting during cleaning

Recommended starting dilution of 5% for all.DSS 700 & DSS 800— Semi-Synthetic• Ideal for general-purpose machining and grinding • Suited for ferrous and most nonferrous materialsDSS 700 Cutting/Grinding Fluid• For light- to moderate-duty applications, such as

milling, turning, drilling and surface grindingDSS Cutting/Grinding Fluid• Designed for moderate- to heavy-duty applications,

such as deep hole drilling, boring, reaming, tapping, internal and/or grinding

DSS T-TECH—Synthetic• Duty range: moderate- to heavy-duty operations• Recommended for machining and grinding

aluminum, iron and steel • Excellent lubricity, rancidity and mold control DSY 4100—Synthetic• Ideal for roll and surface grinding• For light- to moderate-duty operations• Exceptionally good bacteria, mold, foam, and rust control • Best suited for cast iron, nodular iron, and carbon steels

Starting At

$7939



56-57 HD 14-09 Fluids.indd 5656-57 HD 14-09 Fluids.indd 56 8/14/14 10:09 AM8/14/14 10:09 AM
























Fluids

57


Water-Soluble Prime-CutCutting & Grinding Oil• 5 gal. pail• Contains chlorinated extreme-pressure additive

capable of lubricating a complete range of machining and grinding operations

• Extremely effective when used on aluminum• May be used with all metals, except magnesium• Use up to 1 part Prime-Cut to 33 parts water• Contains no Class 1

ozone-depleting chemicals



Tapfree Excel Cutting & Tapping Fluid

Heavy-duty, Low-Odor Lubricant for Hard Metals• Safe for all metals• Exceptionally good on

hard-to-cut metals such as stainless steel, titanium, and exotic alloys

• Produces tighter tolerances, longer tool life, and a better surface fi nish on all metals

• Clings to the cutting tool for better hold on horizontal operations and less product usage

Reg. Sale Size Model # Price Price 8 oz. bottle KN404-3029 $6.26 $4.49 16 oz. bottle KN404-3028 10.10 7.29


WS-5050 Heavy-Duty Soluble Oil Multi-purpose coolant for all machining operations and metals except titanium.• Suitable for CNC machining • Excellent on aluminum • Non-staining• Not for use on carbide

Sale Price5 Gallons

$12299

Cutting & Grinding Fluid ConcentrateContains No Class 1 Ozone - Depleting ChemicalsHeavy-duty biostable water soluble cutting and grinding fl uid concentrate• For most machining

operations on all metals including aluminum (except magnesium)

• Free from chlorine, sulfur and silicone

• Dilute as needed between 10-33 parts water


• Mobilmet® 766 is formulated to prevent formation of oil mist, contributing to a safer and more pleasant working environment

• Provides better work fi nish • Allows closer tolerances• Achieves longer tool life between regrinds• Reduces chip welding in heavy-duty applications• Allows faster machining at higher speeds and/or feeds

Extra high-performance oil-based cutting oils, intended for severe cutting operations on diffi cult-to-machine steels. For hard-to-machine metals that must be broached, tapped or threaded.

Mobilmet® 766 Heavy-Duty Cutting Oil


SAVEUP TO

20%

Contains No Class 1 Ozone-Depleting Chemicals• The most effective cutting

fl uid available• Excels in tough materials • Effective on all metals

(including aluminum)

New Rapid Tap Cutting Fluid

Reg. Sale Size Model # Price Price 4 oz. KN505-2025 $3.16 $2.69 1 Pint KN505-2026 9.69 7.99 1 gal. KN505-2027 55.80 43.99 5 gal. KN505-2028 262.86 205.00

As Low As

$269

EP-XTRA™ Cutting Fluid

Contains No Class 1 Ozone-Depleting ChemicalsTap Magic Contains No 1,1,1-TrichloroethaneUse on all metals, including stainless, aluminum and titanium.

Improvestool life!

Price Each Case EP-XTRA Less Case Size Qty. Model # Than Case Qty. 4 oz. Spout Top 24 KN505-2011 $ 2.90 $ 2.35 12 oz. Aerosol Can 12 KN405-0566* 15.18 9.95 1 pint Spout Top 12 KN505-2013 9.77 7.99 1 gal. Can 2 KN505-2014 58.85 49.95 5 gal. Pail 1 KN505-2012 245.61 229.00*No air shipment

As Low As

$235

• Accurately measures coolant concentration• Optimizes coolant use and tool life• Includes instructions and case• Use KN505-2111 for general purpose

applications, KN505-2112 for low concentrations and synthetics

• KN505-2112 features auto-temperature compensation

Coolant Testers/Refractometers

Solution Meas. Reg. Sale Range Grad. Model # Price Price 0 - 32% 0.2% KN505-2111 $125.84 $69.95 0 - 10 0.1 KN505-2112 129.90 79.95

SAVEUP TO

44%

56-57 HD 14-09 Fluids.indd 5756-57 HD 14-09 Fluids.indd 57 8/14/14 10:10 AM8/14/14 10:10 AM
























http://use-enco.com

http://use-enco.com


Shop Supplies

58


N95 Particulate Welding Respirator

Recommended for particulates from metal sanding, grinding, soldering and welding. • For use against non-oil

aerosols, nonspecifi c service time

• 3M™ Cool Flow™ valve• M-nose clip• Advanced

electret mediaMfr’s # 8515

PKG. QTY.: 10



Per Pkg.

KEVLAR® protectors have applications in advanced manufacturing, automotive, electrical work, metalworking and meat packing.• Easily laundered with minimal shrinkage• Made with FDA accepted materials for use in food

processing applications• Provides exceptional cut, slash and heat resistance• High level of comfort and dexterity • Elastic opening at both ends• Soft, comfortable knit conforms to the arm• ANSI cut level 4

Cut-Resistant Sleeves

With Thumbhole

KEVLAR® is a registered trademark of E.I. du Pont de Nemours and Company.

Reg. Sale L Model # Price Price Elastic Opening at Both Ends 10" KN404-3061 $2.66 $2.15 12 KN404-3062 2.81 2.27 14 KN404-3063 3.40 2.75 16 KN404-3065 4.19 3.39 18 KN404-3066 3.72 3.70 18 KN404-3067* 5.38 4.02 22 KN404-3070 5.57 4.51 24 KN404-3072 6.15 4.98 Elastic Opening at Both Ends w/Thumbhole 14 KN404-3064 3.60 2.91 18 KN404-3068 4.74 3.79 18 KN404-3069* 5.17 4.18 22 KN404-3071 5.89 4.77*Black

SAVEUP TO

40%Durable against rust. Recommended for steel up to 50 HRC. Comes in a fi tted case. • Includes A-Z, period and 0-8 • 6/9 interchangeable

36 Pc. Machine Made Steel Figure/Letter Sets

Approx. Size Reg. Sale of Character Model # Price Price 1⁄16" KN505-1432 $43.87 $25.99 3⁄32 KN505-1433 43.87 25.99 1⁄8 KN505-1434 43.87 25.99 3⁄16 KN505-1435 55.14 34.99 1⁄4 KN505-1436 64.51 39.95

Starting At

$2599

SAVEUP TO

13%

Mfr’s # 42530

Mfr’s Sale Range Mfr’s # Model # List Price 0 to 600°F 42529 KN307-2938 $79.99 $68.95 -58 to 1000°F 42530 KN307-2936 89.99 78.95

• Large LCD with backlight • Built-in laser pointer to improve aim • Fixed emissivity (.95) covers 90% of

surface applications • Narrow fi eld of view • Audible and visible

overrange indicators • °F/°C switchable • Automatic data hold • 6:1 fi eld of view • Complete with

9V battery • Carrying case

InfraRed Thermometers

As Low As

$6895

Polo Cloth Wipes• Soft and absorbent wipes are suitable for many uses• Tough enough to wipe oily hands and soft enough

for delicate surfaces• Approximately 6 - 8 rags per pound

Liner Cloth Wipes• Absorbent wipes are perfect for grease and oil• Ideal for machinery and hand wiping• Approximately 5 - 6 rags per pound

Colored Cotton Cloth Rags

Box Polo Low Liner Low Wt. Model # Price Model # Price 5 lbs. KN990-1350 $4.40 KN990-1348 $5.64 10 KN990-1351 8.81 KN990-1349 11.26 25 KN990-1352 21.99 KN505-0938 28.12 25 KN505-0940 43.98 KN505-0939 56.25These items are not for use in critical tasks or food service environments

As Low As

$440

Fix Thread Restorer

As simple as a fi le, just pass over & restore face of thread instantly.

Reg. Sale Thread Pitches On Each Model # Price Price 11, 12, 13, 14, 16, 18, 20 and 24 tpi KN990-3074 $11.41 $8.95 9, 10, 12, 16, 20, 27, 28 and 32 tpi KN990-3075 11.76 8.95 .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00mm KN990-3076 11.76 8.95 Accessory Black Plastic Handle KN990-3077 .97 —

SAVEUP TO

23%

Your Choice

$895

• Flexible spatula temple design for a comfortable fi t during long use

• Strong, yet lightweight, polycarbonate scratch-resistant lens

• Lens is hardcoated and offers 99.9% UV protection

• Compliance: ANSI Z87.1+

Checklite® Safety Glassesy

SAVE25%

On Qty.: 12+

Lens Frame Sale Price Ea. Color Color Model # 1-11 12+ Clear Clear KN328-4568 $1.56 $1.17 Clear Clear KN404-1521* 1.96 1.47 Gray Smoke KN328-4569 1.56 1.17 Light Blue Light Blue KN328-4570 1.94 1.45*Anti-fog lens

58-59 HD 14-09 SS.indd 5858-59 HD 14-09 SS.indd 58 8/14/14 10:12 AM8/14/14 10:12 AM






































Shop Supplies

59




Razor Edged™ Shears

• Good for cutting heavy cardboards, rubber, light rope, upholstery, layers of fabric, etc.

• Lightweight• High grade stainless steel blades • Ergonomic, ambidextrous, bent

contoured plastic handles• 913⁄16" OAL • 33⁄4" LOC

• Use on heavy metals, stainless steel, iron, copper, brass, nickel, tin and lead

• Special acid solution fl ows like ink in a felt-tip pen

• No electrical fl ux necessary• Leaves distinctive,

smudge-proof, black markings

ChemicalEtching Pen

SAVE10%



Unlined Driver’s GlovesTop Grain Cowhide Select GradeStraight Thumb – Thumb that normally lies straight with the index fi nger.Keystone Thumb – Type of insert thumb on full-leather glove patterns. Provides additional wear and greater comfort.

Straight Thumb

Keystone Thumb

Price Per Pair Size Model # 1-11 12+ Straight Thumb Small KN325-1849 $7.48 $5.25 Medium KN505-4103 7.48 5.25 Large KN505-4104 7.48 5.25 X-Large KN505-4105 7.48 5.25 Keystone Thumb Small KN327-6956 8.78 5.99 Medium KN327-6952 8.78 5.99 Large KN327-6949 8.78 5.99 X-Large KN327-6951 8.78 5.99

As Low As

$525

• For use in hard-to-reach areas• Angle head allows easy access

under machinery• Comfortable plastic grip• Permanent magnet• Non-corrective construction• Max. pull: 47.5 lbs.

38" MagneticRetriever

areas

SAVE50%



NeverWet™ creates a barrier which dramatically repels water, mud, ice and other liquids. Water forms nearly perfect spheres and rolls off the surface, keeping items dry and clean.Ideal to use on:• Safety valves• Motors• Work boots & gloves• Security equipment• Outdoor equipment

Liquid Repelling TreatmentPrevents water, mud and ice from sticking to multiple surfaces

Per Kit



AA Mini Mag-Lite Holster ComboThe Most Versatile, Reliable Flashlight Around• 53⁄4" length • 2200 candlepower• Black woven fabric belt

holster, two AA batteries and spare bulb in the tail cap are included

Color Order Number Black KN505-4220 Red KN505-4221 Blue KN505-4222

Your Choice


BRAG® Box POP-UP® Box Jumbo Roll

X90 Cloths• Ideal for heavy wiping,

prepping surfaces with solvents, and cleaning metal shavings and rough surfaces

• Up to 35% less waste • 20% less use overall • White • Made of HYDROKNIT® material

As Low As

$21 No. of Mfr’s Order Low Description Size Total Sheets No. Number Price BRAG® Box 11.1 x 16.8" 136 12891 KN404-1579 $21.00 POP-UP® Box 8.3 x 16.8 340 12890 KN404-1578 55.00 Jumbo Roll 11.1 x 13.4 450 12889 KN404-1580 55.00

SAVEUP TO

42%

Suggested Center Use With Shield Dim. Reg. Sale Lathe Size H Chucks W L H Model # Price Price 6-12" 6" Up to 8" 6" 12" 6" KN505-4016 $225.02 $129.95 12-16 8 Up to 12 8 16 8 KN505-4017 272.28 159.95 16-20 10 Up to 16 8 19.7 10.25 KN505-4019 317.70 189.95 20-24 13 Up to 20 8 24 12 KN505-4018 361.23 209.95

Clear Lexan® Shield Lathe Guards

• Wraparound design accommodates 3- or 4-jaw chucks• Heavy-duty, chrome-plated extension tube and hardware • Lock-in, swing-away design • Exceeds OSHA requirements for safety

Starting At

$12995
























http://use-enco.com


Shop Supplies

60


Noncontact Circuit Reg. Sale AC Voltage Frequency CAT Mfr’s # Model # Price Price 100v to 600v AC 50/60 Hz III-600v DV20 KN337-1278 $13.59 $9.95 50v to 1000v AC 50/500Hz IV-1000v DV24 KN337-1279 14.83 10.95

SAVE26%

Electrical Receptacle Tester• Tests reserved/open connections• Tests GFCI circuits• Tests for faulty wiring in 3-wire receptacles• Detects 5 wiring faultsMfr’s # ET10

Pen Style Noncontact AC Voltage Detectors• Insulated tip suitable for checking live

conductors or “hot side” of AC outlet• Rugged, double molded housing• Built-in bright LED fl ashlight• Red LED light indicator

Voltage & Electrical Testers



• All-weather, all-condition lightweight yellow T-prene insulated cords

• Remains fl exible, even in the most extreme conditions (to –70˚C)

• Resists oil, acids and solvents • SJEOW wire type • 3 conductor • Meets OSHA requirements

for outdoor use • 300V max. voltage

Polar/Solar® Extension Cords

Wire 125V Reg. Sale Ga. Length Rating Model # Price Price 16 25' 13A KN990-3175 $26.01 $19.95 16 50 13A KN990-3176 43.58 33.95 16 100 10A KN990-3177 75.02 59.95 14 25 15A KN990-3178 28.33 21.95 14 50 15A KN990-3179 46.97 36.95 14 100 13A KN990-3180 91.07 71.95 12 25 15A KN325-5864 40.00 31.95 12 50 15A KN325-5865 69.14 54.95 12 100 15A KN325-5866 125.81 99.95

Power indicator light in female plug

Starting At

$1995

Pkg. Reg. Sale Price Per Pkg. Type Qty. Model # Price 1-5 6+ AAA 4 KN327-7120 $4.70 $4.23 $3.68 AAA 12 KN327-7116 11.22 10.09 8.78 AA 4 KN327-7121 4.47 4.02 3.50 AA 12 KN327-7115 11.22 10.09 8.78 C 2 KN327-7124 4.58 4.12 3.58 C 8 KN327-7119 14.10 12.69 11.04 D 2 KN327-7123 5.23 4.70 4.09 D 8 KN327-7117 14.10 12.69 11.04 9V 2 KN327-7122 8.73 7.85 6.83 9V 4 KN327-7118 15.26 13.73 11.95

Max® Alkaline Batteries Environmentally Responsible –No Added Mercury Long-lasting performance in the broadest range of applications.

Sold in Pkg. Qty. Only

Flood-Type Coolant Systems• Combine a vertical centrifugal pump, heavy gage

steel tank, 4' of Tygon hose, fl exible nozzle and valve• Production-quality recirculating recovery system• Can be a replacement coolant system or original

equipment on production machinery – bandsaws, drill presses, grinders, cut-off and milling machines

• Equipped with a metal chip recovery system to collect stray metal chips

• 115v, 60 Hz, single-phase thermally protected motors with 6' cord and plug

Tank Use with Reg. Sale Size Cutting Oil L x H x W Model # Price Price 3 Gal. Up to 100 SSU 15 3/4 x 10 x 12" KN296-2030 $138.02 $129.00 10 Gal. Up to 300 SSU 24 x 7 3/4 x 11 3/4 KN296-2060 166.44 149.00 4' Hose Assembly for KN296-2060 KN296-2061 20.77 18.69

As Low As

$1293 Gal.

10 Gal.

SAVEUP TO

38%

Machinery’s Handbook 29th Edition

Reg. Sale Description Model # Price Price Toolbox Handbook KN404-3049 $99.42 $69.99 Large Print Handbook KN404-3050 121.75 85.99 CD-ROM KN404-3051 99.42 69.99 CD & Toolbox Handbook Set KN404-3053 173.51 125.95 CD & Large Print Handbook Set KN404-3054 191.78 135.95 Handbook Guide KN404-3052 16.19 9.99 Toolbox Edition & Guide Set KN404-3055 112.61 79.95 Large Print Edition & Guide Set KN404-3056 129.87 95.95 Pocket Companion KN404-3057 22.28 17.95

By Oberg, Jones, Horton, Ryffel, Green and McCauley. Thoroughly Revised• All standards have been updated• All sections have been updated

and revisedAs Low As

$6999

C-Thru® Separator Oil Skimmer

Easy to install with no machine tool modifi cation. This patented transparent oil skimmer is a revolutionary and cost-effective alternative to belt/disc skimmers. • Processes metalworking fl uid at an industry leading

rate of 210 GPH • The compact, injection-molded, seam-free unit holds 3 gallons of fl uid and mounts on the machine tool via a magnet base

• Tramp oil accumulates inside the transparent unit and is visible to the machine tool operator who can easily discard the oil by opening a valve

• Eliminates oily, slick fl oors caused by belt/disc skimmers• Increases fl uid life, decreases waste, and increases tool life• Removes particulate as well as tramp oil • Eliminates good coolant loss experienced with belt/disc skimmers • Eliminates consumables • 40-100˚F temperature range


$459







































Shop Supplies

61


Electrical Test KitIncludes:• Extech 430: True rms digital multimeter with 11 functions• MA200: 400A AC clamp-on meter • Non-contact AC

voltage detector• Set of CAT III-1000v

test leads • Type K thermocouple

bead probe• Type K to banana

input adapter• Carrying case with handle


$9295Mfr’s List: $109.99

SAVE15%

SAVE23%

Mfr’s Sale Nozzle Mfr’s # Model # List Price 12" 60M12 KN505-1982 $117.00 $89.95 18 60M18 KN505-1984 139.00 106.95

Portamist Spray Mist Coolant SystemsFor Fast Setups• 12" or 18" fl exible Loc-Line® with

adjustable spray nozzle • Base-mounted air/coolant

control valve • 4' coolant hose with

anti-syphon check valve• 4' air hose with

male pipe thread fi tting

Starting At

$8995

SAVEUP TO

34%

Blue Red Reg. Sale Container Size Model # Model # Price Price 2 oz. Felt Tip Applicator KN 505-1392 KN505-1391 $6.04 $3.99 4 oz. Can w/Cap Brush KN825-8310 KN505-1393 7.17 5.09 8 oz. Can w/Cap Brush KN825-8320 KN825-8350 8.24 6.59 16 oz. Aerosol KN825-8300 KN825-8340 11.61 7.89 31.4 oz. Jug KN505-1386 KN505-1395 18.02 11.89

• Prevents glare with uniform, deep color• Dries in two to four minutes• Scribes sharp, clear

precise lines

Blue/Red Layout Fluid Layout Fluid Remover• Removes layout fl uid and

staining colors • Removes oil, grease and dirt

from metals and plastics• Use to dilute layout fl uid • Contains no Class 1

ozone-depleting chemicals • 16 oz.; net fi ll 12 oz. • Case qty.: 12

As Low As

$399Sale Price

Model # KN505-1390

$729On 12+

Sale Price Each 1-11: $8.29

Kit contains: Dash# Quantity 006 thru 012 20 110 thru 116 13 210 thru 222 10 325 thru 327 7

382 Pc. Buna-N O-Ring Kit

Supplied in a plastic case



t

SAVEOVER

30%

SAVE20%

Pre-moistened, with pumice scrubbing power.• 72 sheets per bucket

Hand Cleaner Towels



SAVEUP TO

20%

Reg. Sale Grade Model # Price Price Economy KN505-3927 $5.10 $4.29 Premium KN505-3926 7.52 5.95

As Low As

$429

• Sturdy, long-lasting 100% blue cotton

• One size fi ts all • Economy grade includes

waist pocket; 35"L• Premium grade includes chest

pocket w/pen holder; 36"L

Denim Shop Aprons

Contains No Class 1 Ozone-Depleting ChemicalsOne Gallon Makes 33 Gallons Formula “77” for Tougher Service Mist & Flood Cooling• Recommended where tougher machining

conditions require greater lubricity• Particularly useful where the material is very abrasiveFormula “78” Synthetic Mist Coolant for Light Duty • For high-effi ciency cutting of exotic metals and alloys

such as Monel, Inconel, titanium and nonferrous metals• Dissolves in water to a clear solution

Container Case Mfr’s Sale Size Qty. Model # List Price Formula 77 1 gal. 4 KN505-2076 $38.00 $28.95 5 gal. Pail 1 KN505-2077 185.00 139.95 Formula 78 1 gal. 4 KN505-2074 36.00 27.95 5 gal. Pail 1 KN505-2075 178.00 135.95

Formula 77 & 78 Concentrated Coolants

As Low As

$2795

Extension Cord Winder

• Holds up to 150' of cord• Heavy-duty construction• Left or right-hand operation• Cord not included



SAVEOVER

20%
























http://use-enco.com



Shop Supplies

62

Shop the 2014 Enco Master Catalog

SAVEUP TO

20%Threadlockers 222MS™ Threadlocker, Low Strength/Purple• Locks and seals screws242® Threadlocker, Medium Strength/Removable/Blue• Locks and seals nuts, bolts, screws, fi ttings262™ Threadlocker, Permanent Strength/Red• Heavy-duty use on bolts and studs271™ Threadlocker, High Strength/Red• Locks and seals plugs, bolts, and nuts290™ Threadlocker, Wicking Grade/Green• Locks and seals pre-assembled fasteners to

eliminate vibration and corrosion

Reg. Sale Description Size Model # Price Price 222MS™ 10ml KN505-2681 $13.51 $11.95 Threadlocker 50 KN825-8200 38.40 32.00 250 KN505-2682 151.46 129.00 242® 10 KN825-8205 14.57 11.95 Threadlocker 50 KN825-8210 40.59 34.50 250 KN505-2673 151.46 125.00 262™ 10 KN505-2674 13.88 12.49 Threadlocker 50 KN505-2675 38.40 32.00 250 KN505-2676 151.46 129.00 271™ 10 KN825-8215 14.57 11.59 Threadlocker 50 KN825-8220 40.59 35.00 250 KN505-2672 151.46 125.00 290™ 10 KN505-2677 13.88 11.49 Threadlocker 50 KN825-8225 38.40 32.95 250 KN505-2678 151.46 118.95

As Low As

$1149

SAVEUP TO

40%

Hose Reg. Sale L Model # Price Price 25' KN327-7398 $133.63 $79.95 50 KN327-7399 173.85 110.99

• 3⁄8" ID • Steel construction,

corrosion-resistant powder coating

• Solid 1" steel center support shaft

• Full-fl ow solid brass swivel joint

• Multi-position release ratchet; spring fully enclosed and lubricated

• Wall, ceiling or fl oor mounted

• 300 max. psi • Includes hose

Spring Retractable Hose Reels

As Low As

$7995

1-YEARWARRANTY

Safety Blow Gun1⁄4" npt Air Inlet

• Chrome-plated, die-cast zinc

• Non-corrosive, leakproof and lightweight

• 145 max. psi


$582

SAVEOVER

45%

Safety Pistol Blow GunFixed Angle Nozzle with Side Hole

Regular-Duty• 1⁄4" tip diameter• 4" tube length • 1⁄4" npt female brass

thread connection • -40 to 176°F

temperature range • 160 psi max. working

pressure • Lightweight, thin-walled

aluminum tubing



Ideal for wet environments, or when heavy debris is a concern.• Large drainage holes facilitate

drainage and resist clogging• Natural/SBR rubber • Safety beveled on

all four sides• 1⁄2" thickness • Slip resistant

Anti-Fatigue MattingLarge Drainage Holes

Low Size Model # Price 3 x 5' KN328-5967 $55.00 3 x 10 KN328-5966 95.00

Starting At

$55

X50 Wipers

Economy rags good for applying lubricants, vehicle and equipment cleaning and low-lint glass cleaning.• Nylon-reinforced for strength and tear

resistance• Durable wet and dry • Sheet size: 9.8W x 13.4"L • 1100 sheets per roll • Material: HYDROKNIT® • White

Jumbo Roll



The Original Troubleshooter Lubricant

• Lubricates, cleans, protects and displaces moisture

• Removes grease and road tar • Will not harm paints, plastics, çrubbers or fabrics • Does not contain silicones

As Low As

$599

Reg. Sale Description Model # Price Price 16 oz. Aerosol KN505-1184 $6.55 $5.99 1 gal. Can KN505-1186 22.10 19.99 5 gal. Pail KN505-1187 99.59 95.95 Spray Bottle KN422-1623 4.58 3.99





























Shop Supplies

63


KN328-5478

Compact Fluorescent Task Lights

• 23 watt Energy Star rated compact fl uorescent lamp (included) • Mounting hardware for coupler base included

• Double-wall shade design stays cool to the touch• 6' cord with grounded plug • Color: Black • 24" reach

Reg. Sale Description Model # Price Price Adjustable Clamp-On Base Task Light KN328-5478 $83.69 $65.95 Coupler Base Task Light KN328-5476 77.23 59.95 Direct Mount Task Light KN328-5479 72.56 55.95 Magnetic Base Task Light KN328-5477 83.69 65.95 23W Compact Fluorescent Lamp (Pkg. 2) KN328-5475 20.23 15.95

As Low As

$5595

g

SAVEUP TO

22%

Swing Arm Incandescent Task Lights• Balanced arm with

steel springs• Extends to 33" reach• Clamp-on base • Uses standard

60 watt bulb (not included)

Color Model # Light Gray KN505-0047 Black KN505-0048

Your Choice


SAVE15%

18" Magnetic Mount Gooseneck Work Light• Rugged, all-metal construction• White-shade interior

fi nish provides optimum light output

• Porcelain socket with on/off switch

• 9' grounded cord • Uses 100 watt incandescent

bulb (not included)



• Cordless rechargeable unit with AC/DC charging adapters included

• Nine LED lights on end of light doubles as a spotlight/fl ashlight • 120v AC/DC

• 360° rotating swivel hook• Durable plastic construction

with polycarbonate lens• Cushioned grip with instant-ON switch • Magnetic clamp• Up to 12 hours of battery life

(when used only as a fl ashlight)

SAVEOVER

30%

35 LED Hand Work Light



2 Pc. Way Cover Set

Protect table beds and ways from damage.• Easily installed • 30L x 15"W rear cover • 15L x 15"W accordion-type front cover



SAVEOVER

30%

SAVEUP TO

30% No. of Extractor Use Drill Reg. Sale Pcs. Size No. Size Model # Price Price 5 #1 - #5 5⁄64 – 19⁄64" KN310-1435 $8.64 $5.99 9 #1 - #9 5⁄64 – 11⁄16 KN619-2197 63.79 45.95

Spiral Flute Screw Extractor Sets

• Left hand spiral, tapered fl ute• Eliminates redrilling and retapping for a larger screw

As Low As

$599

SAVE38%

Cordless LED Magnetic Light Bar

• Energy-effi cient bright white light

• Magnetic back attaches to any ferrous surface • Built-in hook allows use at any angle • Multi-purpose lights for use around home,

garage or workshop • 72 LED • 4 AA batteries

(not included)



Reg. Sale Description Model # Price Price Clamp-On Base KN411-1335 $218.03 $145.00 Magnetic Base (No air shipment) KN411-1336 222.92 145.00

LED Machine Lights

Clamp-On Base

• Compact, cool-to-touch 3" dia. metal shade • Screw clamp or powerful magnet with

90 lbs. pull strength • 25" reach fl exible steel gooseneck • On/off switch, 8' grounded cord • 35,000-hour bulb life • Consumes 1⁄4 the energy

of a halogen bulb • Lamp included

WithstandsHeavy

MachineVibration!d cord

SAVEUP TO

35%Magnetic

Base

















http://use-enco.com

http://use-enco.com


Material Handling & Storage

64

Easy, Secure Shopping

SAVE25%

• 30 pre-labeled compartments• Holds 1⁄8, 3⁄16,

1⁄4, 5⁄16, 3⁄8, 7⁄16, 1⁄2, 9⁄16, 5⁄8, 3⁄4, 7⁄8 & 1"

• 145⁄8L x 73⁄8W x 73⁄4"H

• Color: Gray• Wt.: 101⁄4 lbs.

End Mill Dispenser



SAVE24%

• Protective bumper • Durable enamel fi nish• 2 rigid, 2 swivel

rubber-wheeled casters• Handle folds down for

easy storage• Shipped knocked down • 19W x 29"L• Wt.: 18 lbs.

Fold Down Platform Truck300 Lbs. Capacity



No. of Wt. Mfr’s Sale Drawers Mfr’s # Lbs. Model # List Price Friction Slides 5 275B 121 KN811-3338 $936.40 $561.00 7 277B 138 KN811-3342 1,087.60 652.00 Ball-Bearing Slides 5 275XB 125 KN990-3525 968.00 580.00 7 277XB 142 KN990-3523 1,160.40 696.00 8 378XB 165 KN990-3500 1,233.40 740.00

5-Drawer Cabinet

27" Roller Cabinets• 18" deep friction or ball-bearing slide drawers• Four casters: 2 rigid, 2 swivel w/toe locks • Complete with cylinder lock and keys • Tamperproof internal locking system5-Drawer • Has swing-down panel that conceals and

secures storage compartment

7-Drawer Cabinet

As Low As

$561

LIFETIME LIMITEDWARRANTY

SAVE40%

SAVE20%



$199Mfr’s List: $249.40

• External lock bar with keyed lock • Full-width drawer pulls and friction drawer slides• 300 lb. capacity • 3 x 1" casters • 25 lbs. load rating per drawer • Upgraded LTL-shippable packaging • 26W x 14D x 44"H • Wt.: 73 lbs.Mfr’s # STC-266RD-F

Shop Series 26" Mechanics’6-Drawer Tool Center

• 133⁄8L x 91⁄4D x 2"H steel drawers• High impact polystyrene inserts with

scooped compartments• Finished in gray baked enamel• Complete with plastic scoop tray, hinged

cover, and positive pull-down latches• Drawers fi t securely in Durham Slide

Rack Cabinets Compartments Reg. Sale Number Size ( W x D) Model # Price Price 12 49⁄32 x 27⁄32" KN891-4036 $18.14 $15.95 16 33⁄16 x 27⁄32 KN891-4037 18.32 15.95 20 217⁄32 x 27⁄32 KN891-4038 18.98 16.95 21 (20) 2 x 27⁄32

(1) 33⁄4 x 115⁄8 KN891-4039 19.67 16.95 24 (20) 131⁄32 x 27⁄32

(4) 225⁄32 x 27⁄32 KN891-4040 19.94 16.95 Adjustable KN891-4041 21.15 18.95

KN891-4041

KN891-4036

Small Steel Storage Drawers

• Fits on 27 or 29" roller cabinets • Brown wrinkle fi nish• Partitioned top till

holds lift-out tray equipped with socket set divider

• 261⁄8W x 12D x143⁄4"H

• Wt.: 58 lbs.Mfr’s # 266

6-Drawer Mechanics’ Chestt

SAVE37%


$375Mfr's List: $602.80

LIFETIME LIMITEDWARRANTY

Corrugated Shelf Bin Boxes

• Fast, effi cient storage and organization system • 200 lb. test, white-fi nish, corrugated 4" high• Convenient hanging feature allows bin to be

suspended from shelf lip• Shipped fl at for

easy storage As Low As

55¢Each

12" Deep Price Each 18" Deep Price EachWidth Model # 1-49 50+ Model # 1-49 50+ 2" KN990-3720 $.74 $.55 KN990-3727 $1.08 $.81 3 KN990-3721 .87 .65 — 4 KN990-3722 .89 .67 KN990-3728 1.21 .91 6 KN990-3723 1.08 .81 KN990-3729 1.35 1.01 8 KN990-3724 1.24 .93 KN990-3730 1.48 1.11 10 KN990-3725 1.56 1.17 KN990-3731 1.83 1.37 12 KN990-3726 1.62 1.21 —

f SAVE

UP TO

25%On Qty.: 50+

64-65 HD 14-09 MH.indd 6464-65 HD 14-09 MH.indd 64 8/14/14 10:22 AM8/14/14 10:22 AM
































65


Endless Type 5

Eye & Eye Twisted

Eye & Eye Flat

Reg. Sale L Model # Price Price 1 Ply 3' KN327-6093 $16.41 $10.95 4 KN327-6094 19.06 11.95 6 KN327-6095 24.37 15.95 8 KN327-6096 30.00 19.95 2 Ply 3 KN327-6107 34.14 21.95 4 KN327-6108 39.32 25.95 6 KN327-6109 49.67 32.95

Flat Twisted Reg. Sale L Model # Model # Price Price 1 Ply 3' KN327-6043 KN327-6041 $16.60 $10.95 4 KN327-6044 — 17.84 11.95 6 KN327-6045 — 20.38 12.95 8 KN327-6046 — 22.88 14.95 10 KN327-6042 — 25.42 16.95 2 Ply 3 KN327-6066 KN327-6063 20.27 12.95 4 KN327-6067 KN327-6064 23.00 14.95 6 KN327-6068 — 27.93 17.95 8 KN327-6069 — 34.14 21.95

Polyester Web Slings• Yellow abrasion-resistant treatment • Red core warning yarns aid inspection process • Tag for permanent identifi cation,

required by OSHA • 1"W

Eye & Eye - Flat or Twisted Type 3 & 4Lifting Capacity (Lbs.)1 Ply: Basket: 3200, Choker: 1250, Vert.: 16002 Ply: Basket: 6400, Choker: 2500, Vert.: 3200

Endless Type 5Lifting Capacity (Lbs.)1 Ply: Basket: 6400, Choker: 2500, Vert.: 32002 Ply: Basket: 12,400, Choker: 4900, Vert.: 6200

Plastic Toolbox with Tray

• Positive action latch• Solid brass hinge pins• Padlock tab• Heavy-duty handle• Charcoal gray w/

black latch and handle• 141⁄2L x 71⁄2W x 51⁄4"D



Tool Chests• For use with WorkSmart roller cabinets • Ball-bearing slides • One lock with 2 keys • Full-length piano hinge with 2 metal lid stays• Portable chest features a single handle on top • Red smooth fi nish

No. of Cap. Wt. Low Drawers W x D x H Lbs. Lbs. Model # Price Portable Tool Chest 3 201⁄2 x 85⁄8 x 117⁄8" 100 19 KN405-0486 $59.00 Intermediate Chest 3 261⁄4 x 121⁄2 x 101⁄2 150 29 KN405-0487 90.00 Chests 7 26 x 121⁄8 x 163⁄4 300 57 KN405-0477 142.00 11 393⁄4 x 181⁄8 x 271⁄2 450 180 KN405-0491 699.00

Intermediate Chest

7 Drawers

11 Drawers

LIMITED LIFETIME WARRANTY Portable

Tool Chest

Black Yellow Blue Red Low Length Model # Model # Model # Model # Price 18" KN411-0687 KN411-0690 KN411-0689 KN411-0688 $5.05 24 KN411-0691 KN411-0694 KN411-0693 KN411-0692 5.49

Stretch Tie Down CordsWith Safety Clasp & Hook

• Great for applications in leaving cord attached to a tarp

• Helps prevent loss of the tie-down

As Low As

$505

Plastic Utility Carts• TPR & PP core casters

Cap. Overall Dimensions Wt. Black Gray Reg. Sale Lbs. W x L x H Lbs. Model # Model # Price Price 2-Shelf Tray 350 171⁄2 x 341⁄2 x 331⁄4" 30 KN411-0684 KN411-0679 $154.39 $139.00 500 255⁄8 x 401⁄2 x 331⁄4 39 KN477-0686 KN411-0682 175.08 159.00 2-Shelf Flat 350 171⁄2 x 341⁄2 x 333⁄8 351⁄2 KN411-0681 KN411-0678 164.72 149.00 500 255⁄8 x 401⁄2 x 333⁄8 44 KN411-0677 KN411-0685 182.81 169.00

2-Shelf Tray

2-Shelf Flat

As Low As

$139

Steel Worktables1500 Lb. Capacity• Provides added work space and storage area around production machines • May also function as machine stands• All-steel construction with smooth, maintenance-free top of 16 gauge

steel and 16 gauge angle steel posts with adjustable feet• Gray powder-coat fi nish

Top Size Adjustable Ht. Wt. Reg. Sale W L Range Lbs. Model # Price Price 18" 24" 18-24" 44 KN337-1272 $78.87 $65.95 18 24 26-36 51 KN337-1273 87.40 75.95 24 3 29-34 77 KN337-1274 119.60 105.95













































http://use-enco.com

http://use-enco.com



66

It’s IN STOCK and

• 55 gal. has the option of adding a sixth caster in the middle for more load capacity• 6.5" OAL • 3" wheel dia.

Cap. Wheel Wheel Wt. Reg. Sale Lbs. Dia. Type W Lbs. Model # Price Price 30 Gal.; 4 Wheel 1000 191⁄4" Poly 11⁄4" 15 KN411-0674 $61.78 $55.95 55 Gal.; 5 Wheel 1250 231⁄2 Poly 11⁄4 25 KN411-0675 84.50 69.95 1400 231⁄2 Steel 1 25 KN411-0676 104.48 89.95

Steel Drum Dollies

Shop Series 26" Tool Storage• External lock bar with

keyed lock • Full-width drawer pulls • Reinforced sidewall

construction • 25 lbs. load rating per drawer

Roller Cabinet: 26W x 18D x 32"H, 4 x 2" casters (500 lbs. cap. per cabinet)Top Chest: 26W x 12D x 171⁄2"HIntermediate Chest: 26W x 12D x 111⁄2"H

Roller Cabinet

Intermediate Chest

Top Chest

*Inset handles †Top mat

Mfr’s Sale Description Mfr’s # Model # List Price Red with Friction Drawer Slides 5-Drawer Roller Cabinet SCA-265RD-F KN405-0362 $270.84 $199.00 3-Drawer Intermediate Chest SIN-263RD-F KN405-0390* 146.77 109.00 7-Drawer Top Chest SCH-267RD-F KN405-0401 203.11 149.00 Black with Ball-Bearing Drawer Slides 5-Drawer Roller Cabinet SCA-265BK-B KN405-0366† 294.44 219.00 2-Drawer Intermediate Chest SIN-262BK-B KN405-0391 152.95 109.00 5-Drawer Top Chest SCH-265BK-B KN405-0403 218.57 159.00

1-YEARWARRANTY

Starting At

$109

SAVEUP TO

28%

SAVEUP TO

34%Strong and versatile containers will stack on one another, hang from louvered panels, rails, racks and carts, forming effi cient storing and moving systems, or can be used on standard shelving.• Bins are made of high-density polypropylene and are

unaffected by weak acids and alkalis• Fully interchangeable with all popular

brands of hanging/stacking bins• Large front label slot allows larger

bar code scanning• Full-width lip on back of bin

supports bin on hanging systems• Autoclavable up to 250˚F • FDA approved

Hanging/Stacking Bins

Bin Bins Price Per Case Price Per Case Outside Dim. Load Case Yellow Red Blue Reg. Sale Case Dividers Low W x D x H Cap. Qty. Model # Model # Model # Price Price Qty. Model # Price 41⁄8 x 53⁄8 x 3" 10 lbs. 24 KN317-0920 KN317-0921 KN317-0919 $25.46 $19.95 6 KN327-6187 $4.17 41⁄8 x 73⁄8 x 3 10 24 KN317-0924 KN317-0925 KN317-0923 44.36 34.95 6 KN327-6184 4.51 51⁄2 x 107⁄8 x 5 30 12 KN317-0928 KN317-0929 KN317-0927 56.19 44.95 6 KN327-6185 7.02 11 x 107⁄8 x 5 60 6 KN317-0935 KN317-0936 KN327-6197 42.42 27.95 6 KN327-6185 7.02 81⁄4 x 103⁄4 x 7 50 6 KN317-0939 KN317-0940 KN317-0938 45.06 30.79 6 KN327-6188 9.10

As Low As

$1995

Counter Height Storage CabinetsWhere Vertical Space is Limited

• Two 150 lb. cap. adjustable shelves• Includes two keys with lock • 36W x 18D x 42"H • Wt.: 75 lbs.Gray Model # KN240-5751Black Model # KN240-5752

Sale Price


Each

Locking Service Cart

Locking drawer and locking top are keyed the same.• 16W x 351⁄4H x 30"L • 4" wheels—2 locking and 2 standard • Chrome 16 gauge steel frame • 3" deep shelves with friction slides • 350 lbs. load capacity• Wt.: 65 lbs.



SAVE37%




































67

READY TO SHIP!

Tufl ex™ Endless Round Slings

• Made of polyester yarns covered by double-wall polyester tubular webbing, without side stitching, to cover the load-bearing core yarns

• Wear points can be shifted, and improved load balance can be achieved by spreading the sides

• Choke tightly and unchoke easily after use

• Tuff-Tag™ guaranteed to outlast sling—includes rated capacities, sling type, width, length, material and warning

Reg. Sale L Model # Price Price Purple 3' KN828-9680 $11.31 $7.95 4 KN828-9681 14.36 9.95 6 KN828-9682 20.45 14.95 8 KN828-9683 26.54 18.95 Green 3 KN828-9685 14.96 10.95 4 KN828-9686 18.98 13.95 6 KN828-9687 27.02 19.95 Yellow 4 KN828-9690 23.82 17.95 6 KN828-9691 34.44 25.95 8 KN828-9692 43.56 32.95

Lifting Capacity Lbs. Color Basket Choker Vert. Purple 5200 2100 2600 Green 10,600 4200 5300 Yellow 16,800 6700 8400

Warehouse Desks• 341⁄2W x 30"D sloping writing

surface • 18 gauge desk plate; 14 gauge post

• Large drawer (24W x 28D x 31⁄2"H) with lock and key

• Three compartments above desktop • Gray enamel fi nish • Shipped knocked downWall Desk• Mounts on wall • Wall mount fasteners not includedModel # KN337-1271 Reg. Price $242.63 Sale Price $115.95Foreman’s Desk• Adjustable legs • 43" writing height with under shelf • 53" max. heightModel # KN337-1269 Reg. Price $269.46 Sale Price $145.95Locking Cabinet Desk• Large double-door cabinet with lock • 43" writing height • 53" overall heightModel # KN337-1270 Reg. Price $426.34 Sale Price $225.95

Wall Desk

Locking Cabinet Desk

Foreman’s Desk

Wt. Gray Tan Black Reg. Sale Description Lbs. Model # Model # Model # Price Price 18" Deep 110 KN990-3801 KN990-3802 KN990-3803 $231.08 $189.95 18" Extra Shelf 7 KN990-3804 KN990-3805 KN990-3806 23.11 19.95 24" Deep 130 KN240-5753 KN240-5754 KN422-1649 261.64 225.95 24" Extra Shelf 9 KN240-5755 KN240-5756 KN240-5757 30.81 25.99

Storage Cabinets72H x 36"W

• Rugged, all-steel construction • Three-point locking mechanism • Durable powder-coat fi nish • Four 150 lb. capacity adjustable shelves • Easily assembled

As Low As

$18995

Cabinet Color Model # Gray KN990-3736 Tan KN990-3737 Black KN990-3738

CombinationCabinets

Store Clothing & Supplies Securely in a Single Cabinet.• 3-point locking mechanism with 2 keys• Rugged all-steel construction for a

lifetime of service • Easily assembled • Durable powder-coat fi nish• 36W x 18D x 72"H • Wt.: 115 lbs.Includes: 18" coat rod, full-width top shelf and 4 storage shelves that adjust on 2" centers.

Your Choice


SAVEOVER$40

Heavy-Duty Utility Carts500 Lb. Capacity

Utility Cart

• Easy-reach tool/accessory hooks and storage area • Customize-it fi ttings built-in: add your own wire spools, rolls and more • Sturdy structural foam construction won’t rust, dent, chip or splinter • 5" non-marking gray TPR casters • Ergonomic handle • 2 shelvesUtility• 23⁄4" deep shelf trays keep small items from falling outFlat Shelf• For easy transport of oversized bulky items Overall Dim. Wt. Black Beige Mfr’s Sale W x L x H Lbs. Mfr’s # Model # Model # List Price Utility 17 x 383⁄8 x 323⁄4" 31 4500-88 KN337-0000 KN337-0003 $280.80 $165.00 25 x 437⁄8 x 323⁄4 45 4520-88 KN337-0001 KN337-0004 318.98 185.00 25 x 535⁄8 x 323⁄4 52 4546-00 KN337-0002* KN337-0005* 557.10 379.00 Flat Shelf 17 x 383⁄8 x 321⁄4 42 4505-00 KN337-0006 KN337-0009 301.02 175.00 25 x 437⁄8 x 321⁄4 42 4525-00 KN337-0007 KN337-0010 333.60 195.00 25 x 535⁄8 x 321⁄4 50 4545-00 KN337-0008* KN337-0011* 527.90 359.00*750 lb. capacity

Starting At

$165

SAVEUP TO

42%

5-Drawer Project Center• Plastic top with molded-in storage compartments • Ball-bearing slides hold up to 50 lbs. per drawer • Black • One lock with two keys• 41⁄4" casters with 2 fi xed and 2 swivel • 261⁄2W x 18D x 31"H • Wt.: 98 lbs.

LIMITED LIFETIMEWARRANTY


$195











































http://use-enco.com


Over 90,000 PRODUCTS Available Hand Tools

• Drop-point blade • Includes Bear’s Priorities of Survival pocket guide• Partially serrated high-carbon stainless steel blade• Blades have lock back—locks blade securely in place Compact Scout™

• Nail nick in blade for easy openingScout™

• Ergonomic textured rubber grip handleFolding Sheath Knife™

• Ergonomic, textured rubber grip handle

• Comes with lightweight, mildew-resistant nylon sheath

Bear Grylls Knives

Blade Closed Reg. Sale Description L L OAL Model # Price Price Compact Scout™ 2.5" 3.3" 5.8" KN411-2058 $22.21 $12.95 Scout™ 3.3 4 7.3 KN411-2059 37.15 19.95 Folding Sheath Knife™ 3.6 4.9 8.5 KN411-2060 41.99 25.95

Folding Blade

Scout™ & Folding Sheath Knife™

Compact Scout™

As Low As

$1295

• Requires half the effort of conventional, compression-type cutters

• Tough, alloyed, high-carbon steel• Ergonomic, non-slip

Xuro-Rubber™ grips• Light Touch™

return spring• Full fl ush cut• 12 AWG capacity• 6" OAL

Heavy-Duty Flush Cutter



Head Face Head Mfr’s Sale Wt. Dia. L OAL Mfr’s # Model # List Price Standard 10 oz. 113⁄64" 31⁄8" 101⁄8" 57-530 KN800-0310 $31.76 $13.99 18 13⁄4 33⁄4 113⁄8 57-531 KN800-0312 39.93 16.95 21 2 41⁄4 13 57-532 KN800-0314 46.46 19.95 42 215⁄32 43⁄4 143⁄8 57-533 KN800-0316 65.52 29.95 52 213⁄16 51⁄4 151⁄4 57-534 KN800-0318 90.50 39.95 Slimline 5 29⁄32 3 91⁄2 57-540 KN800-0320 29.62 12.95 14 119⁄64 41⁄4 109⁄16 57-541 KN800-0322 37.32 15.95 18 133⁄64 41⁄2 121⁄8 57-542 KN800-0324 40.27 17.95 21 117⁄32 51⁄4 127⁄8 57-543 KN800-0326 49.73 20.95

• Non-sparking hammers made of UNI-CAST™ construction have no exposed metal

• Soft face yields and won’t mar surfaces• Slimline models ideal

for confi ned areas

Compo-Cast® Dead Blow Soft Face Hammers

Slimline

Standard

As Low As

$1295

MFR�S WARRANTY

SAVEUP TO

57%

Includes:2 Instant Change™ Retractable Blade Utility Knives• Durable, all-metal knife body • Quick, one-button blade change• Thumb pad and ergonomically designed cutting angle • Integrated string cutter • Swing-out blade storageMfr’s # 10-788

Heavy-Duty Utility Blades (100 with Dispenser)• High-carbon steel general-purpose

cutting bladeMfr’s # 11-921A

Instant Change™ Value Pack


$1495Mfr’s List: $35.09

Metalmaster® Super Snips

• Stands up to heavy stock

• Compound spring action for fast, effortless feed

• Non-slip textured grips, safety latch and serrated jaw made of tough molybdenum steel

• High-tensile-strength alloy steel handle

• 93⁄4"L with a 13⁄8" length of cut

SAVE35%

M3R

M1R

M2R

Cut/Color Mfr’s # Model # Left/Red M1R KN842-1222 Right/Green M2R KN842-1224 Straight/Yellow M3R KN842-1226

Your Choice

$1695Mfr’s List: $26.31

Includes:• 4 precision slotted: 1.4, 2, 2.4, 3mm• 2 precision Phillips: #0, #1• 7 slotted: (2) 3⁄16 x 3", (2) 1⁄4 x 4", 3⁄16 x 6",

5⁄16 x 6", stubby• 5 Phillips: (2) #1 x 3",

(2) #2 x 4", stubby• 3⁄16" offset slotted • #2 offset PhillipsMfr’s # 60-220

20 Pc. ErgonomicScrewdriver SetSlotted & Phillips

SAVE39%


$2195Mfr’s List: $36.55

MFR'SWARRANTY

• Wide capacity • Hex jaw for a tighter fi t• Wider handle • 3 Pc. Sets include 6, 8, and 10" wrenches

Black Oxide Mfr’s Sale Chrome Mfr’s Sale OAL Cap. Model # List Price Model # List Price 4" 1⁄2" KN891-6895 $21.37 $10.39 KN891-6892 $24.06 $12.09 6 15⁄16 KN842-1008 20.62 11.39 KN842-1000 23.89 12.69 8 11⁄8 KN842-1010 20.90 12.59 KN842-1002 24.92 13.69 10 15⁄16 KN842-1012 26.88 14.79 KN842-1004 30.72 16.79 12 11⁄2 KN842-1014 41.50 22.09 KN842-1006 45.81 24.89 15 111⁄16 KN891-6896 76.12 40.59 KN891-6893 84.50 44.29 18 21⁄16 KN891-6897 132.42 71.99 KN891-6894 146.42 76.69 3 Pc. Set KN890-8862 74.26 38.99 KN505-0335 88.95 43.95

Adjustable WrenchesBlack Oxide or Chrome Finish

As Low As

$1039

SAVEUP TO

51%

68-69 HD 14-09 HT.indd 6868-69 HD 14-09 HT.indd 68 8/14/14 10:27 AM8/14/14 10:27 AM




































Online at use-enco.com Hand Tools

Mfr’s Sale Set Model # List Price 9 Pc. Metric KN505-0308 $17.45 $7.69 13 Pc. Inch KN505-0307 20.98 8.69 22 Pc. Combo KN800-0177 38.45 12.95

9 Pc. Metric Set: Sizes: 1.5-10mm13 Pc. Fractional Set: Sizes: .050-3⁄8"22 Pc. Combination Set: (13): .050-3⁄8", (9): 1.5-10mm

Ball-Hex-L™ Key Sets

22 Pc. Set Only

$1295P S t OO l

SAVEUP TO

66%

Includes: 8, 12, 16, 24 & 32 oz.

5 Pc. Ball Pein Hammer SetFiberglass Handles


$32

SAVE48%

• Satin-chrome fi nish with heavy-duty jaws and handles

• Nickel-plated fi nish resists rust

• WR Series: Built-in wire cutterIncludes: 5WR, 6LN, 7CR, 10R and 10WR. Mfr’s # 2077704

Locking Plier SetWith BONUS Irwin Bag


$4595Mfr’s List: $88.42

SAVEUP TO

45%

Mfr’s Sale Set Model # List Price 9 Pc. Metric KN308-0643 $20.60 $11.39 13 Pc. Inch KN308-0642 25.45 13.99 22 Pc. Combo KN308-0641 40.00 22.99

GoldGuard™ Balldriver Ball End Hex Key Sets14K Gold Plated for Corrosion Resistance & Easy Identifi cation9 Pc. Set—1.5-10mm13 Pc. Set—.050-3⁄8"22 Pc. Combo Set—.050-3⁄8" and 1.5-10mm

22 Pc. Set Only

$2299Sale Price

Model # KN327-4325

$21Mfr’s List: $36.45

SAVE42%

MFR'SWARRANTY

• Shaped and polished ends • Superior tensile strength• Made from tough,

shock-resistant tool steel• Special heat-treated

and modifi ed-parabolic struck end resists mushrooming and chipping

Includes:• 1⁄4, 5⁄16" center punches• 1⁄16, 1⁄8, 5⁄32, 3⁄16, 1⁄4,

5⁄16" pin punches• 3⁄32" starter punch • 3⁄8, 1⁄2, 5⁄8"

cold chisels• Vinyl pouchMfr’s # 16-299

12 Pc. Cold Chisel & Punch Set

SAVE44%

7 Pc. Roll Pin Punch Set

Includes 1⁄16, 3⁄32, 1⁄8, 5⁄32, 3⁄16, 7⁄32 and 1⁄4" roll pin punches in a vinyl pouchMfr’s # J49007


$3995Mfr’s List: $72.11

8 Pc. 4" Long Drive Pin Punch Set• Hardened chrome vanadium steel• Modifi ed parabolic struck end resists

mushrooming and chipping• Round knurled handle for extra grip8 Pc. Set includes:• 1⁄16, 3⁄32, 1⁄8, 5⁄32, 3⁄16, 7⁄32, 1⁄4, 5⁄16"• Canvas roll



MFR'S LIFETIMEWARRANTY

SAVEOVER

15%

28 Pc. Transfer Punch Set

• For accurate transferring of drilled or tapped holes

• Heat-treated steel • Stand includedSizes: 3⁄32-1⁄2" x 64ths & 17⁄32".



SAVEOVER

20%

• (2) 11R, 11" locking C-clamps

• (2) 6R, 6" locking C-clamps

• 10R, 10" straight jaw locking plier

• Men’s XL T-shirt with Vise-Grip logo

5 Pc. Locking C-Clamp Set



SAVEOVER

15%

68-69 HD 14-09 HT.indd 6968-69 HD 14-09 HT.indd 69 8/14/14 10:27 AM8/14/14 10:27 AM














http://use-enco.com

http://use-enco.com


The Lowest Prices in the Power Tools

SAVEOVER

45%ON SAW

Includes:• (3) 6" 24 tpi blades for thin metal cutting• (3) 6" 14 tpi blades for medium-to-thick metal cutting• (2) 6" 6 tpi blades for increased woodcutting control• (1) 9" 6 tpi blade for greater woodcutting capacity• Innovative, job site durable case for convenient blade storageMfr’s # 49-22-1145

• 0-3000 spm, excellent power and cut speed • 11⁄8" stroke• Gear-protecting clutch • Counterweighted mechanism• QUIK-LOK® blade clamp • 120v ACMfr’s # 6519-31

12 Amp SAWZALL® Reciprocating Saw


$125Mfr's List: $240.00

9 Pc. SAWZALL® Blade SetSale Price

Model # KN404-3036

$1595Mfr’s List: $29.30

• Overload protection • Electronic clutch

extends life of tool and prevents bind-up

• Advanced airfl ow system – maximizes airfl ow and reduces debris ingress, improving motor performance and life

• 24% larger bevel gear extends tool life• Up to 50% more power • 100% tool-free

accessory changes • Tool-free adjustable guard • 11,000 rpm • 11 amps

41⁄2" Small Angle Grinders

Switch Mfr’s Sale Type Mfr’s # Model # List Price Paddle 6147-31 KN411-0990 $158.10 $89.00 Paddle w/Lock-on 6147-30 KN411-0993 158.10 89.00 Trigger 6121-31 KN411-0994 213.20 119.00 Trigger w/Lock-on 6121-30 KN411-0995 213.20 119.00

Starting At

$89

M12 Compact Drill (2401-20)• Drill has 150 in./lbs. of torque at 0-500 rpm • Quick bit-loading 1⁄4" hex chuck for bit insertion and release with one handM12 Multi-Tool (2426-20)• Cuts, grinds, sands, and scrapes • Accessory adaptor (included)

is compatible with most competitive accessories• Variable-speed dial has 12 speed settings

from 5000-20,000 opmAlso includes: (2) 12v lithium-ion batteries, 30-minute charger, #2 Phillips bit, wood cutting blade, sanding pad, 5 sanding sheets and contractor bag.Mfr’s # 2496-22

Compact Drill & Multi-Tool Combo Kit


$185Mfr’s List: $304.00

• For all air-powered tools• Provides excellent protection against rust and

corrosion of all internal parts• Extends tool life• Compatible with all systems and seal materials



MSAVE

OVER

15%

Almo® 525 Air Tool Oil

Industry’s Lightest Full-Size Random Orbital Sander• Low profi le for outstanding control • Low air consumption and vibration• 12,000 rpm free speed • Two 3⁄16" orbit patterns• Includes three interchangeable grips

Pad Dia. Mfr’s # Model # 5" MP4400-05 KN890-9853 6 MP4400-06 KN890-9854

SAVE41%

Your Choice

$159Mfr’s List: $270.00

Ergonomic Random Orbital Sanders

Pneumatic Vacuum Air Gun KitRemoves debris/chips with simultaneous blow and vacuum action, transporting them to a heavy-duty collection bag.• Use as: Vacuum—for factory, shop, auto or home

Blower—for workbenches, tools and more• Quick-change setting from vacuum to blower• 3.6 cfm @ 90 psi • Zinc body • 1⁄4" npt inlet thread Includes: 4 different size vacuum accessories, 4' fl exible hose, heavy-duty collection bag and 2 clamps.



SAVEOVER

10%

PneumaticPencil Grinder• 5.25" length• Suitable for intermittent use in

industrial maintenance or non-intensive production

• 60,000 rpm • 1⁄8" collet spindle • 1⁄4" air inlet • 7 cfm • Air hose includedMfr’s # RP9104


$8995Mfr’s List: $176.00

SAVEOVER

45%

SAVE54%

• Compact, lightweight design for easy maneuverability

• Front exhaust• 90° angle head • 22,500 rpm • 43⁄4" length • 51⁄2 cfm avg.

air consumption • 1⁄4" npt air inlet • 3⁄8" min.

hose size Mfr’s # CP875

1⁄4" Mini Angle Die Grinder


$4595Mfr’s List: $100.00

70-71 HD 14-09 PT.indd 7070-71 HD 14-09 PT.indd 70 8/14/14 10:29 AM8/14/14 10:29 AM















Industry GUARANTEED! Power Tools

• Use for cutting sheet metal, auto body panels, duct work and fi berglass

• Cuts intricate shapes and tight radius curves on fl at or curved surfaces

• 9000 spm • Stroke length: 1⁄4"• Tooth type: 18, 32, 24 tpi

91⁄4" PneumaticReciprocating Saw



SAVE40%

SAVEUP TO

51%

Specifi cations Right Angle: 3 cfm Air Inlet Thread: 1⁄4" Hose Size: 3⁄8" id

1⁄4" Air Die Grinders• 1⁄4" collet • 90 psi air pressure • Rear exhaust • Straight has self-locking throttle lever

to prevent accidental startingRight Angle

Straight

No Load Reg. Sale Description Speed rpm Model # Price Price Straight 22,000 KN337-0045 $36.50 $18.95 Right Angle 20,000 KN337-0042 45.63 21.95

As Low As

$1895

SAVE43%

• Provides enough torque to handle most demanding applications

• Reversible Kit Includes:• 10 sockets: 7⁄16, 1⁄2, 9⁄16, 5⁄8, 11⁄16,

3⁄4, 13⁄16, 7⁄8, 15⁄16, 1"• 5" extension bar • Mini oiler • 4mm Hex wrench• Oil pot • Nipple • Carrying case• 1⁄2" bolt cap. • 4.5 cfm • 61⁄4" OAL• 7000 rpm • 580 ipm • 250 ft./lbs. max. torque

1⁄2" Impact Wrench Kit



MAX Die GrindersMAX Power, MAX Performance & MAX Comfort• 0.4 hp motor • Lube-free design eliminates contamination of work environment • Enhanced grip design and low-throttle lever provide extended run time without fatigue • 1⁄4" collet • 6 cfm average air consumption • 25 cfm air consumption @ load • 1⁄4" nptf air inlet • 3⁄8" min. hose size • 90 psiAngle• Spindle lock for faster

abrasive changeovers• 20,000 rpm free speedMfr’s # 5102MAX

Straight• 25,000 rpm free speedMfr’s # 5108MAX


$159Mfr’s List: $250.00


$145Mfr’s List: $225.00

SAVEUP TO

43%

Straight

Mfr’s Sale Description rpm Mfr’s # Model # List Price Straight 22,000 5054 KN505-3202 $110.00 $61.95 Right Angle 20,000 5055 KN505-3203 133.00 79.00

1⁄4" Air Die Grinders• Convenient built-in speed regulator• Straight grinder is rear exhaust• Right angle is front exhaust• Safety throttle • 1⁄4" collet

Right Angle Starting At

$6195

3" Cut-Off Tool• Soft grip • Rotating air inlet• .5 hp • Low noise

79 dB (A)• New regulator—

easy to set rpm• 4 cfm @ 90 psi• 20,000 rpm• 8" length


$59

1⁄4" Pneumatic 90° Die Grinder Kit

Kit includes: • Die grinder • 5 Pc. 1⁄8" arbor stones • 5 Pc. 1⁄4" arbor stones • 1⁄8" collet insert • Hose adapter • Open collet

changing wrenches

• Molded case



SAVEOVER

30%

1⁄4" Straight Die Grinder

• Lock-off throttle prevents accidental startup

• 22,000 rpm• 26 cfm @ load • .4 hpMfr’s # CP872



Pneumatic Pistol GripSheet Metal Shear• Cuts up to

18 gauge steel• Head can rotate for versatility• All-aluminum housing construction• 83⁄4ʺ OAL • 1⁄4ʺ air inlet• 2600 strokes per minute• 4 cfm • 90 psi

SAVE40%



70-71 HD 14-09 PT.indd 7170-71 HD 14-09 PT.indd 71 8/14/14 10:29 AM8/14/14 10:29 AM













http://use-enco.com

400 Nevada Pacifi c Hwy., Fernley, NV 89408 PRSRT STDU.S. Postage

PAIDEnco

KN01

Bench Grinders• Heavy-duty• Rugged cast-iron base and

motor housing provide durability and prolonged life

• Tool rests for accurate grinding

Includes:• 36 and 60 grit wheels • Eyeshields • Spark defl ectors• Adjusting wrench

As Low As

$95

DTE® 20 Super-Stabilized Hydraulic Oils5 Gallon Pail

Highest quality, premium anti-wear industrial hydraulic oils. Meets or exceeds major pump test qualifi cations.• Protects against rust • Multimetal compatibility under

both wet and dry conditions

DTE 24–ISO32 (SAE10) DTE 25–ISO46 (SAE20)DTE 26–ISO68 (SAE20)

Reg. Sale Description Model # Price Price DTE 24 KN505-1207 $119.88 $84.95 DTE 25 KN505-1209 119.88 84.95 DTE 26 KN505-1211 119.88 84.95

SAVEOVER

25%

Keeps systems virtually

deposit-free!

Reg. Sale Description Sizes Model # Price Price Plain Type 0-1⁄4" & 1⁄4-1⁄2" KN308-0179 $30.06 $26.95 Ratchet Type 0-1⁄4 & #12-1⁄2 KN308-0180 64.41 57.97

T-Type Tap Wrench SetsPlain & Ratchet Type

Used in hand tapping. Can also be used with drills, reamers, etc.Includes: Plastic reference chart and case.

KN308-0179

As Low As

$2695

*Horizontal only

SAVEUP TO

30%

• Steel jaws• Ground base for horizontal

or vertical use• High tensile iron casting• Fast position hinged handle

Heavy-Duty Drill Press Vises

Jaw Jaw Base Reg. Sale Width Opening L x W Model # Price Price 21⁄2" 2" 61⁄8 x 51⁄2" KN426-8050* $13.48 $9.95 4 31⁄8 71⁄2 x 61⁄2 KN426-8055 35.44 25.95 5 41⁄8 83⁄4 x 73⁄4 KN426-8060 56.99 39.95 6 51⁄8 11 x 9 KN426-8065 87.14 59.95

Starting At

$995

Mfr’s Max. Spindle Mfr’s Sale No. Size HP RPM Size Amps Model # List Price DW756 6" 5⁄8 3450 1⁄2" 4.0 KN307-0576 $174.00 $95.00 DW758 8 3⁄4 3600 5⁄8 4.2 KN307-0577 238.00 139.00

01-72 CP1 14-09_CustProspCover.indd 101-72 CP1 14-09_CustProspCover.indd 1 8/14/14 8:44 AM8/14/14 8:44 AM













http://www.use-enco.com

Documents

Enco September HOTdeals