175
Entry codes 2018/19 All exam series This document lists the entry codes for all series in the 2018/19 academic year. Any updates will be posted on the Exams administration/Entries page of our website aqa.org.uk Issued November 2018 v1.1

Entry codes Entry codes

  • Upload
    vandieu

  • View
    348

  • Download
    0

Embed Size (px)

Citation preview

aqa.org.uk

Copyright © AQA and its licensors. All rights reserved. AQA Education (AQA) is a registered charity (registered charity number 1073334) and a company limited by guarantee registered in England and Wales (company number 3644723). Registered address: AQA, Devas Street, Manchester M15 6EX.

November 2018 G02018a

Entry codes 2018/19All exam series

This document lists the entry codes for all series in the 2018/19 academic year. Any updates will be posted on the Exams administration/Entries page of our website aqa.org.uk

Issued November 2018 v1.1

Entry codes 2018/19

Entry codes 2018/19

3

Contents

1 General information 4 Series 4 Entry codes 4

2 Restrictions on entry in 2018/19 5 Unique Learner Numbers (ULNs) 5 Discount (classification) codes 5 Prohibited combinations 6 Private candidates 6 Restricted pilot specifications 6

3 Changes to exams 7 A-level reform 7 GCSE reform 7 Availability of reform qualifications within Wales 8 Availability of reform qualifications within Northern Ireland 8 Availability of outgoing GCSE, AS and A-level qualifications 8 GCSE exams in 2018/19 8

4 Explanatory notes on the entry code tables 9 Example entry code table 9 Key to symbols 11

5 Entry code tables 13 AQA Baccalaureate 14 AQA Certificate (all levels, including Applied General) 15 AQA Level 1/2 Award 19 ELC (Entry Level Certificate) 24 FCSE (Foundation Certificate of Secondary Education) 26 FSMQ Pilot 28 Functional Skills 29 GCE 32

GCE Use of Mathematics Pilot 103 GCSE 105 Project 137 Tech-level 138 Technical Award 154

6 Index to entry codes 155

Entry codes 2018/19

4

1 General information This document lists the unit and subject award entry codes for all series in the academic year 2018/19. Further information about making entries is available from the Exams administration | Entries page of our website aqa.org.uk Series All entries for our examinations are collected by series, irrespective of the method of entry you use to submit them. The closing date for the receipt of entries and the date of publication of results for particular examinations determine each series. A copy of the Exam series guide 2018/19 in A3 format was sent to your centre in September 2018. It is also available from the Exams administration | Entries page of our website aqa.org.uk Entry codes Section 5 contains all the entry codes for all the exams (subject awards, options, units and components) that are available in any given series. You must use the appropriate entry code irrespective of your method of entry. Basedata (containing information on the specifications, units, options and components) will also be provided for each series for centres wishing to submit entries by EDI. A separate entry, using the appropriate entry code, is required for every assessment (subject award, unit or option) for which a result is to be reported. Before making an entry for a particular subject, you should refer to:

• the specification for the subject • any changes to examination provision detailed in the appropriate specification • any restrictions on entry detailed in Section 2 of this document.

Please see the Exams administration | Entries | Entries for exams officers page of our website aqa.org.uk for full details on basedata and submitting entries.

Entry codes 2018/19

5

2 Restrictions on entry in 2018/19 Unique Learner Numbers (ULNs) From January 2014, all students entered for an exam at a state funded school/college in England need a ULN. The ULN is a 10-digit number used to access the Personal Learning Record (PLR) of anyone over the age of 14 involved in education or training. The PLR is an online, lifelong record of individuals' achievements which they can share with other parties (for example employers, colleges, universities). Before entering students, you need to get valid ULNs for them that match the details held in the Learning Records Service (LRS). We can't access LRS to amend errors so if there are mismatches, we will return the invalid data to you, via e-AQA, for you to resolve with LRS. Where the ULN is mandatory we will not process entries if the ULN is not present. However, if the supplied ULN returns as a mismatch from LRS we will report this. We will still issue student results as normal but will be unable to upload these to the PLR. ULNs will not replace UCI numbers (Unique Candidate Identifier) so please ensure you include them in your entries submissions. Discount (classification) codes Discounting guidance can be found on the Department for Education (DfE) websites

• Discounting guidance page of the GOV.UK website • QAN website https://collectdata.education.gov.uk/qwsweb The Department for Education (DfE) assign each specification a national discount code (sometimes referred to as a classification code) on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Some awards (for example GCE Advanced Subsidiary (AS) awards) have two discount codes, as they are grouped differently for key stage 4 (pre-16) and key stage 5 (post-16) discounting purposes1. An early entry rule for key stage 4 (KS4) qualifications was introduced following the Secretary of State announcement that, from 29 September 2013, only a pupil’s first entry to a KS4 qualification counts towards their school’s performance measures. The early entry rule applies even where qualifications are taken with one exam board and then re-taken with another. Although the new rule does not prevent schools from entering pupils for examinations before the end of key stage 4, it aims to focus attention on whether pupils have been sufficiently prepared to achieve the very best possible outcome in that subject. Pupils can sit an examination more than once but it will be their first certificated grade in that subject that will be used for performance measures. You may wish to advise your candidates that, if they take two specifications with the same discount code, schools, colleges, universities and employers are very likely to take the view that they have achieved only one of the two specifications. The same view may be taken if candidates take two specifications that have different discount codes but have significant overlap of contents. Candidates who have any doubts about their subject combinations should check with the institution to which they wish to progress or company they wish to join, before embarking on their programmes. Discount codes are shown in the tables in Section 5.

1 The JCQ basedata formats only allows for one discount code in basedata. From 2017/18 onwards our basedata includes: • Key Stage 4 codes for all Level 1, 2 and 1/2 awards (eg GCSEs), where the DfE have published a KS4 code • Key Stage 5 (post-16) codes for all Level 3 awards (eg AS and A-level), and for any other award that hasn’t been

assigned a Key Stage 4 code.

Entry codes 2018/19

6

Prohibited combinations Before making an entry for a particular subject, you should refer to any statement in the specification that deals with prohibited combinations of units and specifications, in addition to any restrictions of specifications within the same discount code. Candidates entered for prohibited combinations of subjects will be reported on the Centre Entry Query Report. You will be required to cancel or amend the entry. You must inform us of these decisions by EDI or e-AQA. Private candidates A private candidate is someone who enters for exams through an AQA-approved school or college but is not enrolled as a candidate there. Private candidates may be self-taught, home-schooled or have private tuition with a tutor or through a distance learning organisation. Candidates can only become a private candidate in the UK. Exams are not available for private candidates to sit outside the UK. Not all specifications are available to private candidates and those with internally-assessed units may have restrictions. Further information can be found on the private candidates page of our website aqa.org.uk/private Restricted pilot specifications Specifications offered as part of a restricted pilot have been included in this booklet. Most pilot schemes have the maximum number of candidates and centres that can participate determined by the regulator. Centres will normally be invited to take part in the pilot scheme. If you require any information on any of the restricted pilot specifications, please contact the appropriate subject team.

Entry codes 2018/19

7

3 Changes to exams A-level reform Some A-levels have been reformed for first teaching in September 2015 (see table below) with the first assessment of AS in June 2016, and the first assessment of full A-level in June 2017. Phase two and three subjects have followed, for first teaching in September 2016 and September 2017 respectively. Changes to AS levels

• AS levels will be standalone qualifications and will no longer contribute to A-levels • New AS levels have been designed to offer breadth to the curriculum and will broadly remain at their current

standard • In some subjects, it may be appropriate for the AS to be designed to be co-taught with the first year of the

A-level

Phase one subjects (first teaching September 2015)

Phase two subjects (first teaching September 2016)

Phase three subjects (first teaching September 2017)

Phase 3b subjects (first teaching September 2018)

Art and Design Business Computer Science Economics English Language English Literature English Language and Literature History Psychology Sciences (Biology, Chemistry, Physics) Sociology

Dance Drama and Theatre Studies French Geography German Music Physical Education Religious Studies Spanish

Accounting Design and Technology Environmental Science Law Maths subjects (Maths, Further Maths) Media Studies Philosophy Politics

Bengali Biblical Hebrew Modern Hebrew Panjabi Polish

GCSE reform English Language, English Literature and Maths have been reformed for first teaching in September 2015 with the first assessment in June 2017. Phase two and three subjects have followed (see table below) for first teaching in September 2016 and September 2017 respectively. There will no longer be GCSE English (which was available for the final time in June 2017).

Phase two subjects (first teaching September 2016) Phase three subjects (first teaching September 2017)

Art and Design Sciences (Biology, Chemistry, Physics, Double Science) Citizenship Studies Computer Science Dance Drama Food Preparation and Nutrition Modern Foreign Languages (French, German, Spanish) Geography History Music Physical Education Religious Studies

Business Design and Technology Economics Engineering Media Studies Modern Foreign Languages (Bengali, Chinese, Italian, Modern Hebrew, Polish, Punjabi, Urdu) Psychology Sociology Statistics

Entry codes 2018/19

8

Availability of reform qualifications within Wales We are offering all our new GCSE, AS and A-level qualifications in Wales. Of these, only ‘designated’ qualifications recognised by Qualifications Wales will be eligible for state funding. Details of which qualifications attract state funding can be found on the Qualifications Wales website. Availability of reform qualifications within Northern Ireland Schools and colleges in Northern Ireland can offer all of our GCSE, AS and A-level qualifications as long as they meet any subject-specific requirements, even if the qualification was specifically designed for England. The only AQA specifications that schools in Northern Ireland cannot offer are:

• AS Biology (7401) & A-level Biology (7402), AS Chemistry (7404) & A-level Chemistry (7405), and AS Physics (7407) & A-level Physics (7408) as these awards don’t have a mark for assessing practical skills that contribute to the overall grade.

• GCSE English Language (8700), as it doesn’t have a mark for speaking and listening that contributes to the overall grade.

GCSE Biology (8461), Chemistry (8462), Physics (8463), Combined Science: Synergy (8465) and Combined Science: Trilogy (8464) were made available in Northern Ireland for first teaching in September 2017. The first examinations for pupils in Northern Ireland will be in June 2019. Availability of outgoing GCSE, AS and A-level qualifications It is expected that schools will offer reformed GCSE, AS and A-level qualifications wherever they have been introduced. Information about re-sit opportunities for the equivalent outgoing specifications is available from Ofqual’s website. GCSE exams in 2018/19 In December 2011 Ofqual announced that all GCSEs taken in June 2014 and after will be linear in structure. All candidates will be required to take all GCSE assessments at the end of the course with the following exceptions:

• For most GCSEs, a candidate who has previously certificated and is satisfied with the result(s) awarded for the non-exam assessment (NEA) unit(s) may be able to carry forward the result(s) for the NEA.

This change to specifications, including information on carrying forward NEAs, is detailed in the information in Section 5 for each specification.

Entry codes 2018/19

9

4 Explanatory notes on the entry code tables This document lists the unit, option and subject award entry codes for all series in the academic year 2018/19.

• Subjects are grouped by qualification (GCE, GCSE etc) • In each section, subjects are in alphabetical order by specification

Example entry code table (please note that this specification is no longer available and is included here for illustrative purposes only)

8a 8b 1 2 3 4 5 7

6

9

10

Entry codes 2018/19

10

Each table contains the following information

① Details of the specification including

• Specification title

• Qualification Including Full Course, Double Award and so on as appropriate. Where they differ, e-AQA qualification codes are shown in brackets (for example (IG) or (AQAC))

• Specification code not to be confused with the Entry Code – see ②

• Basedata group code this is the code under which all entry codes for a specification can be found in the electronic basedata files (see the Exams administration | Entries | Entries for exams officers | EDI and basedata page of our website aqa.org.uk for details)

• Discount code See page 5. Also known as a classification code KS4 Key Stage 4 discount code KS5 Key Stage 5 discount code

• Qualification number

• Attainment 8 measure(s) English, Maths, EBacc or Other. See the DfE website for more information about Attainment 8 and Progress 8.

② Each entry for a subject award, unit or option should be recorded by means of an Entry Code. A separate entry, using the appropriate entry code, is required for every assessment (subject award, unit or option) for which a result is to be reported. It is essential that you make entries using only these entry codes.

③ The series in which a particular examination is available and the closing date for entries for that series. The tables show only those series in which entries for the specification are collected.

④ For most specifications, the weighting of each unit towards the overall award.

• AS GCE Advanced Subsidiary • AS sgl GCE Advanced Subsidiary Single Award • AS dbl GCE Advanced Subsidiary Double Award • ADV GCE Advanced • ADV sgl GCE Advanced Single Award • ADV+AS GCE Advanced with Advanced Subsidiary (additional) award • ADV dbl GCE Advanced Double Award • Short GCSE Short Course • Full GCSE Full Course • Sgl GCSE Single Award • Dbl GCSE Double Award

⑤ Where applicable, the maximum uniform mark (UMS).

⑥ Description of the units or options within a specification for which an entry can be made.

⑦ Information is shown where multiple components make up the unit or option. Note that no component information is shown where a unit consists of just a single component.

⑧ See Key to Symbols on page 11.

⑨ For modular specifications, entry details for the overall subject award together with information of the valid combinations of units which must be taken to give a subject award.

Entry codes 2018/19

11

⑩ Information about the specification, units or options including details of the following:

information that is relevant to entries any changes to specifications or other important information any specifications that share a discount code with another specification assess a common subject area and should be seen as alternative specifications. See page 5 for full details any prohibited combinations, in addition to restrictions within discount codes information relating to conditions that apply to the entry of private candidates

Key to symbols The following symbols may be used in the entry tables:

Indicates components/elements for which marks may be carried forward from a previous exam series.

For the lifetime of the specification there is no limit on the number of occasions on which the marks can be re-used or on the period of time since the original result. However, other restrictions may apply (please see the information under the entry code table for the specification).

Refer to the information for the specification

Refer to the information for the specification

Refer to the information for the specification

Indicates specifications, units or components for which teachers and/or candidates need to have preliminary material or early papers before the main exam period Where early material applies to the specification as a whole the symbol is shown with the specification details (see 8a in the example on page 9) otherwise it is shown against the relevant unit or component (see 8b in the example on page 9) If your centre is entering candidates for any of these specifications, you will find full details of the source and availability of preliminary material in the Specification and in the Early Question Papers and Preliminary Material booklet, which is available from the Exams administration | Exams guidance | Exams materials page of our website aqa.org.uk

* ** †

Entry codes 2018/19

12

Entry codes 2018/19

13

5 Entry code tables

Entry codes 2018/19 - AQA Baccalaureate

14

AQA Baccalaureate Restricted entry (ABQ) (ABQE)

Series availability

Specification code Basedata group code

9000 9000

Qualification number Discount code Attainment 8 measure(s)

500/3777/8 BAC n/a

Entry code June 2019

6A19 21/2/19

Overall AQA Baccalaureate 9000

Enrichment scheme 9001

The e-AQA qualification code for the overall AQA Baccalaureate is ABQ. The qualification code for the Enrichment element is ABQE.

This is a restricted specification and, as such, centres need to be approved to take part. Further information, including details of registration for the AQA Baccalaureate, can be found on our website at aqa.org.uk/bacc

When making entries, please enter each candidate for both 9000 and 9001.

This specification is not available to private candidates.

Entry codes 2018/19 - AQA Certificate (all levels, including Applied General)

15

Applied Business Level 3 Certificate (Applied General)

Series availability

Weighting %

Specification code Basedata group code

1830 1830

Discount code:

Attainment 8 measure(s):

KS5 0002 Other

Entry code

Jan 2019 1A19

21/10/18

June 2019 6A19

21/2/19 Cer

tific

ate

Exte

nded

C

ertif

icat

e

Qualification numbers:

Certificate: 601/7145/5 Extended Certificate: 601/7146/7

Cer

tific

ate Unit 1 Financial planning and analysis External exam ABS1 33⅓ 16⅔

Unit 2 Business dynamics Centre assessed ABS2 33⅓ 16⅔

Unit 3 Entrepreneurial opportunities (synoptic assessment) Externally assessed ABS3 33⅓ 16⅔

Exte

nded

Cer

tific

ate Unit 4 Managing and leading people External exam ABS4 - 16⅔

Unit 5 Developing a business proposal (synoptic assessment) Centre assessed ABS5 - 16⅔

Unit 6 e-Business implementation Centre assessed ABS6 - 16⅔

Unit 7 Managing an event Centre assessed ABS7 - 16⅔

Unit 8 Marketing communications Centre assessed ABS8 - 16⅔

Certificate in Applied Business Award ABS1 + ABS2 + ABS3 1831 - -

Extended Certificate in Applied ABS1 + ABS2 + ABS3 + ABS4 Business Award + ABS5 + ABS6 or ABS7 or ABS8

1832 - -

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1831, 1832 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - AQA Certificate (all levels, including Applied General)

16

Applied Science new spec Level 3 Certificate (Applied General)

Series availability

Weighting %

Specification code Basedata group code

1775 1775

Discount code:

Attainment 8 measure(s):

KS5 RA14 Other

Entry code

Jan 2019 1A19

21/10/18

June 2019 6A19

21/2/19 Cer

tific

ate

Exte

nded

C

ertif

icat

e

Qualification numbers:

Certificate: 601/7104/2 Extended Certificate: 601/7105/4

Cer

tific

ate Unit 1 Key concepts in science External exam ASC1 33⅓ 16⅔

Unit 2 Applied experimental techniques Centre assessed ASC2 33⅓ 16⅔

Unit 3 Science in the modern world External exam ASC3 33⅓ 16⅔

Exte

nded

Cer

tific

ate Unit 4 The human body External exam ASC4 - 16⅔

Unit 5 Investigating science Centre assessed ASC5 - 16⅔

Unit 6

6A Microbiology Centre assessed ASC6A - 16⅔

6B Medical physics Centre assessed ASC6B - 16⅔

6C Organic chemistry Centre assessed ASC6C - 16⅔

Certificate in Applied Science Award ASC1 + ASC2 + ASC3 1776 - -

Extended Certificate in Applied ASC1 + ASC2 + ASC3 + ASC4 Science Award + ASC5 + ASC6A or ASC6B or ASC6C

1777 - -

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1776, 1777 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - AQA Certificate (all levels, including Applied General)

17

Further Mathematics outgoing spec Level 2 (IG)

Series availability

Weighting %

Specification code Basedata group code

8360 8360

Qualification number Discount code Attainment 8 measure(s)

600/2123/8 RB1B Maths, Other

Entry code

June 2019 6G19

21/2/19

Further Mathematics (Level 2) 8360/1 Written paper 1 (non-calculator) 8360/2 Written paper 2 (calculator) 8360 40

60

This specification will be withdrawn after June 2019.

A single entry is all that is needed for both examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Mathematical Studies Level 3 (L3)

Series availability

Weighting %

Max mark

Specification code Basedata group code

1350 1350

Qualification number Discount code Attainment 8 measure(s)

601/4945/0 2350 n/a

Entry code

June 2019 6A19

21/2/19

raw

Option A - Statistical techniques Paper 1 1350/1

1350A 50 60

Paper 2A 1350/2A 50 60

Option B - Critical path and risk analysis Paper 1 1350/1

1350B 50 60

Paper 2B 1350/2B 50 60

Option C - Graphical techniques Paper 1 1350/1

1350C 50 60

Paper 2C 1350/2C 50 60

Candidates may enter for only one of the three options per series. A single entry is all that is needed for both examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - AQA Certificate (all levels, including Applied General)

18

Personal and Social Education Award and Certificate

Specification code Basedata group code Discount code Attainment 8 measure(s)

5800 n/a HB1 n/a

Qualification numbers: Entry Level 1 Award Entry Level 1 Certificate Entry Level 2 Award Entry Level 2 Certificate Entry Level 3 Award Entry Level 3 Certificate

500/8146/9 500/8143/3 500/8120/2 500/8119/6 500/8122/6 500/8121/4

Level 1 Award Level 1 Certificate Level 2 Award Level 2 Certificate

500/3050/4 500/9966/8 500/8183/4 500/8184/6

All entries for the Personal and Social Education qualifications listed above must be made through the AQA Gateway web-portal. Centres need only make one entry under the specification Personal and Social Education (5800) each series.

During 2018/19 all Personal and Social Education qualifications will be available during three series: Autumn 2018, Spring 2019 and Summer 2019.

The entry window will be made available as per the scheduled dates in the Administrative Procedures and an e-mail will be sent to all centres that have submitted estimated entries for these qualifications.

Further information and a link to the web-portal can be found in the Administrative procedures 2018/19 document available from our website at aqa.org.uk/pse

Preparation for Working Life outgoing spec Short Course - Level 1 and Level 2 (L1L2)

Series availability

Weighting %

Specification code Basedata group code

4800 4800

Qualification number: Level 1 Level 2 Discount code Attainment 8 measure(s)

100/2292/2 100/2293/4 HC42 n/a

Entry code

June 2019 6G19

21/2/19

Preparation for Working Life 4800/W Written paper 4800/C Coursework 4800 80

20

This specification will be withdrawn after June 2019.

This specification is equivalent to a GCSE Short Course. A single entry is all that is needed for the examination paper, coursework entry and certification.

This specification is available to private candidates.

Preparation for Working Life outgoing spec Level 1/2 (AQAC)

Series availability

Weighting %

Specification code Basedata group code

4801 4801

Qualification number Discount code Attainment 8 measure(s)

600/7049/3 HC42 n/a

Entry code

June 2019 6G19

21/2/19

Preparation for Working Life 4801/1 Calculator 4801/2 Non-calculator 4801 70

30

This specification will be withdrawn after June 2019.

A single entry is all that is needed for both examination papers and certification.

This specification is available to private candidates.

Entry codes 2018/19 - AQA Level 1/2 Award

19

Children’s Learning and Development outgoing spec Level 1/2 Award (AQAA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3715 3715 603/0504/6 n/a

Discount code: PT21 Entry code

June 2019 6G19

21/2/19

Unit 1 Research Study Internally assessed CLD1 30 90

Unit 2 Child Study Internally assessed CLD2 30 90

Unit 3 Development of the child from pre-conception to 10 years Written exam CLD3 40 120

Subject award 3716 - 300

This specification will be withdrawn after June 2019.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Fashion and Textiles outgoing spec Level 1/2 Award (AQAA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3720 3720 603/0516/2 n/a

Discount code: JK1 Entry code

June 2019 6G19

21/2/19

Unit 1 Skills demonstration Internally assessed FNT1 30 90

Unit 2 Extended making project Internally assessed FNT2 30 90

Unit 3 Fundamentals of fashion and textiles Written exam FNT3 40 120

Subject award 3721 - 300

This specification will be withdrawn after June 2019.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - AQA Level 1/2 Award

20

Food and Catering outgoing spec Level 1/2 Award (AQAA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3725 3725 603/0517/4 n/a

Discount code: NA1 Entry code

June 2019 6G19

21/2/19

Unit 1 Skills demonstration Internally assessed FDC1 30 90

Unit 2 Extended making project Internally assessed FDC2 30 90

Unit 3 Fundamentals of food and catering Written exam FDC3 40 120

Subject award 3726 - 300

This specification will be withdrawn after June 2019.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Health and Social Care outgoing spec Level 1/2 Award (AQAA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3730 3730 603/0505/8 n/a

Discount code: PA1 Entry code

June 2019 6G19

21/2/19

Unit 1 Individual well-being in health and social care Internally assessed HLT1 30 90

Unit 2 Healthy living Internally assessed HLT2 30 90

Unit 3 Development through the life stages Written exam HLT3 40 120

Subject award 3731 - 300

This specification will be withdrawn after June 2019.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - AQA Level 1/2 Award

21

Information Technology outgoing spec Level 1/2 Award (AQAA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3735 3735 603/0507/1 n/a

Discount code: CJ3 Entry code

June 2019 6G19

21/2/19

Unit 1 Practical skills in IT Internally assessed INF1 30 90

Unit 2 Creating IT systems Internally assessed INF2 30 90

Unit 3 Fundamentals of IT Written exam INF3 40 120

Subject award 3736 - 300

This specification will be withdrawn after June 2019.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Materials Technology outgoing spec Level 1/2 Award (AQAA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3740 3740 603/0518/6 n/a

Discount code: YC4 Entry code

June 2019 6G19

21/2/19

Unit 1 Skills demonstration Internally assessed MAT1 30 90

Unit 2 Extended making project Internally assessed MAT2 30 90

Unit 3 Fundamentals of materials technology Written exam MAT3 40 120

Subject award 3741 - 300

This specification will be withdrawn after June 2019.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - AQA Level 1/2 Award

22

Sport outgoing spec Level 1/2 Award (AQAA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3750 3750 603/0503/4 n/a

Discount code: MA1 Entry code

June 2019 6G19

21/2/19

Unit 1 Practical player performance Internally assessed SPT1 30 90

Unit 2 Coaching and officiating or organising Internally assessed SPT2 30 90

Unit 3 The sports industry Written exam SPT3 40 120

Subject award 3751 - 300

This specification will be withdrawn after June 2019.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

STEM outgoing spec Level 1/2 Award (AQAA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3765 3765 603/1225/7 n/a

Discount code: RA1 Entry code

June 2019 6G19

21/2/19

Unit 1 STEM in industry – Research Task Internally assessed STM1 30 90

Unit 2 Creating a STEM product or service Internally assessed STM2 30 90

Unit 3 Fundamentals of STEM Written exam STM3 40 120

Subject award 3766 - 300

This specification will be withdrawn after June 2019.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - AQA Level 1/2 Award

23

Visual Communication outgoing spec Level 1/2 Award (AQAA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3755 3755 603/0519/8 n/a

Discount code: JC3 Entry code

June 2019 6G19

21/2/19

Unit 1 Skills demonstration Internally assessed VIS1 30 90

Unit 2 Extended making project Internally assessed VIS2 30 90

Unit 3 Fundamentals of visual communication Written exam VIS3 40 120

Subject award 3756 - 300

This specification will be withdrawn after June 2019.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - ELC

24

Step Up to English ELC

Series availability

Weight %

Max mark

Max mark

Specification code Basedata group code

5970 5970

Qualification number Discount code Attainment 8 measure(s)

601/5978/9 HD2 n/a

Entry code

Jan 2019 1A19

21/10/18

June 2019 6G19

21/2/19

raw scaled

Silver Step Silver step Literacy Topics 5972/1 Silver step Creative Reading and Writing 5972/2

NEA 5972 50 50

120 60

120 120

Gold Step Gold step Literacy Topics 5973/1 Gold step Creative Reading and Writing 5973/2

NEA 5973 50 50

120 60

120 120

Candidates may enter for only one of the two steps per series. A single entry is all that is needed for the non-exam assessments and certification.

Only one of the two NEA components for either step can be carried forward in the same exam series. The other component must be re-taken.

This specification is not available to private candidates.

Mathematics ELC

Series availability

Specification code Basedata group code

5930 5930

Qualification number Discount code Attainment 8 measure(s)

601/5874/8 HD4 n/a

Entry code

Jan 2019 1A19

21/10/18

June 2019 6G19

21/2/19

Mathematics Portfolio 5930

This specification is not available to private candidates.

Personal and Social Education Award and Certificate

Specification code 5800

See page 18.

Entry codes 2018/19 - ELC

25

Science ELC

Series availability

Specification code Basedata group code

5960 5960

Qualification number Discount code Attainment 8 measure(s)

601/7522/9 1310 n/a

Entry code June 2019

6G19 21/2/19

Single award Portfolio 5961

Double award Portfolio 5962

Candidates may enter for only one of the two qualifications (Single or Double award) per series.

This specification is not available to private candidates.

Step Up to English ELC See page 24

Entry codes 2018/19 - FCSE

26

Chinese (Mandarin) FCSE

Specification codes: Short Course Spoken Short Course Written Full Course Basedata group codes: Short Course Spoken Short Course Written Full Course

8971 8972 8973 8971 8972 8973

Qualification numbers: Short Course Spoken Short Course Written Full Course Discount codes Short Course Spoken Short Course Written Full Course Attainment 8 measure(s)

603/2114/3 603/2109/X 603/2110/6 5950 5950 5950 n/a

Entry code

Series availability

June 2019

6G19 21/2/19

Chinese (Mandarin) Short Course in Spoken Language Portfolio 8971

Chinese (Mandarin) Short Course in Written Language Portfolio 8972

Chinese (Mandarin) Full Course Portfolio 8973

This specification is not available to private candidates.

French FCSE

Specification codes: Short Course Spoken Short Course Written Full Course Basedata group codes: Short Course Spoken Short Course Written Full Course

8956 8957 8958 8956 8957 8958

Qualification numbers: Short Course Spoken Short Course Written Full Course Discount codes Short Course Spoken Short Course Written Full Course Attainment 8 measure(s)

603/2121/0 603/2122/2 603/2120/9 5650 5650 5650 n/a

Entry code

Series availability

June 2019

6G19 21/2/19

French Short Course in Spoken Language Portfolio 8956

French Short Course in Written Language Portfolio 8957

French Full Course Portfolio 8958

This specification is not available to private candidates.

Entry codes 2018/19 - FCSE

27

German FCSE

Specification codes: Short Course Spoken Short Course Written Full Course Basedata group codes: Short Course Spoken Short Course Written Full Course

8966 8967 8968 8966 8967 8968

Qualification numbers: Short Course Spoken Short Course Written Full Course Discount codes Short Course Spoken Short Course Written Full Course Attainment 8 measure(s)

603/2312/7 603/2126/X 603/2125/8 5670 5670 5670 n/a

Entry code

Series availability

June 2019

6G19 21/2/19

German Short Course in Spoken Language Portfolio 8966

German Short Course in Written Language Portfolio 8967

German Full Course Portfolio 8968

This specification is not available to private candidates.

Spanish FCSE

Specification codes: Short Course Spoken Short Course Written Full Course Basedata group codes: Short Course Spoken Short Course Written Full Course

8996 8997 8998 8996 8997 8998

Qualification numbers: Short Course Spoken Short Course Written Full Course Discount codes Short Course Spoken Short Course Written Full Course Attainment 8 measure(s)

603/2129/5 603/2128/3 603/2127/1 5750 5750 5750 n/a

Entry code

Series availability

June 2019

6G19 21/2/19

Spanish Short Course in Spoken Language Portfolio 8996

Spanish Short Course in Written Language Portfolio 8997

Spanish Full Course Portfolio 8998

This specification is not available to private candidates.

Entry codes 2018/19 - FSMQ Pilot

28

Free-Standing Mathematics Qualifications Advanced level (FSM) Final re-sit opportunity

Series availability

Maximum UMS

Specification codes: Data Analysis Hypothesis Testing Dynamics Principles for Finance Decision Maths Calculus Qualification numbers: Data Analysis Hypothesis Testing Dynamics Personal Finance Decision Maths Calculus

9993 9994 9995 9996 9997 9998 100/6449/7 500/4006/6 500/4090/X 500/4092/3 500/4007/8 500/4008/X

Basedata group codes: Data Analysis Hypothesis Testing Dynamics Principles for Finance Decision Maths Calculus Discount codes: Data Analysis KS4 Data Analysis KS5 Hypothesis Testing KS4 Hypothesis Testing KS5 Dynamics KS4 Dynamics KS5 Personal Finance KS4 Personal Finance KS5 Decision Maths KS4 Decision Maths KS5 Calculus KS4 Calculus KS5 Attainment 8 measure(s)

9993 9994 9995 9996 9997 9998 RB7F 2421 RB7I 2491 RB56 2441 RB7B 2381 RB6A 2490 RB55 2440 n/a

Entry code

June 2019 6A19

21/2/19

Advanced units

Data Analysis 9993 100

Hypothesis Testing 9994 100

Dynamics 9995 100

Mathematical Principles for Personal Finance 9996 100

Decision Mathematics 9997 100

Calculus 9998 100

These specifications are available as a final re-sit only opportunity.

This is a pilot specification and, as such, centres will be invited to take part with the maximum number of centres and candidates participating being determined by the regulator.

UMS marks are issued for each of these free-standing qualifications as they can be used towards the GCE in Use of Mathematics Pilot (see page 103).

These units are available to private candidates only at centres approved for the pilot.

Entry codes 2018/19 - Functional Skills

29

English Functional Skills Level 1 (FS)

Series availability

Specification code Basedata group code

4720 4720

Qualification number Discount code Attainment 8 measure(s)

500/8701/0 HD2 n/a

Entry code

Nov 2018 BG18

4/10/18

Jan 2019 1A19

21/10/18

March 2019 3G19

21/1/19

June 2019 6A19

21/2/19

Reading Paper based 47201

On-screen 47201S

Writing Paper based 47202

On-screen 47202S

Speaking, listening and communication Controlled assessment 47203

Subject award 47201 or 47201S + 47202 or 47202S + 47203 4721

Entry for the Reading, Writing and Speaking elements will not trigger certification. You will also need to make an entry for the overall Level 1 subject award (4721) if certification is required.

A different entry code is used to identify on-screen and paper based options: please ensure that the correct entry code is used.

The software required to run the test can be installed free of charge. Further information on the on-screen tests, including details of the minimum system requirements, can be found on our website at aqa.org.uk/ost

Concurrent entries for both the paper based and on-screen routes for the same element will not be accepted.

This specification is available to private candidates where

• because of the nature of the controlled assessment, candidates are attending an AQA centre that must supervise, authenticate and mark the controlled assessment

or

• if the candidate has already received a result for the controlled assessment unit, it can be used towards the award.

Entry codes 2018/19 - Functional Skills

30

English Functional Skills Level 2 (FS)

Series availability

Specification code Basedata group code

4725 4725

Qualification number Discount code Attainment 8 measure(s)

500/9126/8 HD2 n/a

Entry code

Nov 2018 BG18

4/10/18

Jan 2019 1A19

21/10/18

March 2019 3G19

21/1/19

June 2019 6A19

21/2/19

Reading Paper based 47251

On-screen 47251S

Writing Paper based 47252

On-screen 47252S

Speaking, listening and communication Controlled assessment 47253

Subject award 47251 or 47251S + 47252 or 47252S + 47253 4726

Entry for the Reading, Writing and Speaking elements will not trigger certification. You will also need to make an entry for the overall Level 2 subject award (4726) if certification is required.

A different entry code is used to identify on-screen and paper based options: please ensure that the correct entry code is used.

The software required to run the test can be installed free of charge. Further information on the on-screen tests, including details of the minimum system requirements, can be found on our website at aqa.org.uk/ost

Concurrent entries for both the paper based and on-screen routes for the same element will not be accepted.

This specification is available to private candidates where

• because of the nature of the controlled assessment, candidates are attending an AQA centre that must supervise, authenticate and mark the controlled assessment

or

• if the candidate has already received a result for the controlled assessment unit, it can be used towards the award.

Entry codes 2018/19 - Functional Skills

31

Mathematics Functional Skills Level 1 (FS)

Series availability

Specification code Basedata group code

4367 4367

Qualification number Discount code Attainment 8 measure(s)

500/8703/4 HD4 n/a

Entry code

Nov 2018 BG18

4/10/18

Jan 2019 1A19

21/10/18

March 2019 3G19

21/1/19

June 2019 6A19

21/2/19

Mathematics Level 1 4367

This specification is available to private candidates.

Mathematics Functional Skills Level 2 (FS)

Series availability

Specification code Basedata group code

4368 4368

Qualification number Discount code Attainment 8 measure(s)

500/8702/2 HD4 n/a

Entry code

Nov 2018 BG18

4/10/18

Jan 2019 1A19

21/10/18

March 2019 3G19

21/1/19

June 2019 6A19

21/2/19

Mathematics Level 2 4368

This specification is available to private candidates.

Entry codes 2018/19 - GCE

32

Accounting Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2120 2120 AS 500/2325/1 ADV 500/2329/9 n/a

Discount codes:

AS KS4 AK6 AS KS5 7410 ADV 7410 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Introduction to Financial Accounting ACCN1 50 25 100

Unit 2 Financial and Management Accounting ACCN2 50 25 100

A2 Unit 3 Further Aspects of Financial Accounting ACCN3 - 25 100

Unit 4 Further Aspects of Management Accounting ACCN4 - 25 100

AS subject award ACCN1 + ACCN2 1121 - - 200

ADV subject award ACCN1 + ACCN2 + ACCN3 + ACCN4 2121 - - 400

This specification is available as a final re-sit only opportunity.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Accounting new spec GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7126 ADV 7127 AS 603/0921/0 ADV 603/0920/9 n/a

Discount codes:

AS KS4 AK6 AS KS5 7410 ADV 7410 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 7126 7126 100 120

ADV Paper 1 Financial accounting 7127/1

7127 50 120

Paper 2 Accounting for analysis and decision-making 7127/2 50 120

A single entry is all that is needed for the examination paper(s) and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

33

Anthropology Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2110 2110 AS 500/7690/5 ADV 500/7691/7 n/a

Discount codes:

AS KS4 EE23 AS KS5 4892 ADV 4892 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Being Human: Unity and Diversity ANTH1 50 25 100

Unit 2 Becoming a Person: Processes, Practices and Consequences ANTH2 50 25 100

A2 Unit 3 Global and Local: Societies, Environments and Globalisation ANTH3 - 25 100

Unit 4 Practising Anthropology: Methods and Investigations ANTH4 - 25 100

AS subject award ANTH1 + ANTH2 1111 - - 200

ADV subject award ANTH1 + ANTH2 + ANTH3 + ANTH4 2111 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1111, 2111 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

34

Archaeology Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2010 2010 AS 500/2252/0 ADV 500/2255/6 n/a

Discount codes: AS KS4 DC AS KS5 4730 ADV 4730 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 The Archaeology of Religion and Ritual ARCH1 40 20 80

Unit 2 Archaeological Skills and Methods ARCH2 60 30 120

A2 Unit 3 World Archaeology ARCH3 - 30 120

Unit 4 Archaeological Investigation Coursework ARCH4 - 20 80

AS subject award ARCH1 + ARCH2 1011 - - 200

ADV subject award ARCH1 + ARCH2 + ARCH3 + ARCH4 2011 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1011, 2011 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Private candidates wishing to submit coursework for assessment must make arrangements for their work to be authenticated. Details of their authentication arrangements must be submitted to us using a Private candidate coursework information form at the time their entry request is made. Please see our website aqa.org.uk/private for further details.

Candidates studying the coursework unit (ARCH4) are strongly advised to submit a Personal study outline form to ensure that the proposed topic of study lies within the bounds of the specification.

It is also strongly advised that the approval of the topic is obtained before the candidate embarks on any investigations.

Entry codes 2018/19 - GCE

35

Art and Design: Art, craft and design GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7241 ADV 7201 AS 601/4706/4 ADV 601/4456/7 n/a

Discount codes:

AS KS4 JA2 AS KS5 3510 ADV 3510 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Component 1 NEA - Portfolio 7241/C

7241 60 96 288

Component 2 NEA - Externally set assignment 7241/X 40 96 192

ADV Component 1 NEA - Personal investigation 7201/C

7201 60 96 288

Component 2 NEA - Externally set assignment 7201/X 40 96 192

A single entry is all that is needed for the non-exam assessments and certification.

For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

36

Art and Design: Fine art GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7242 ADV 7202 AS 601/4706/4 ADV 601/4456/7 n/a

Discount codes:

AS KS4 JA2 AS KS5 3690 ADV 3690 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Component 1 NEA - Portfolio 7242/C

7242 60 96 288

Component 2 NEA - Externally set assignment 7242/X 40 96 192

ADV Component 1 NEA - Personal investigation 7202/C

7202 60 96 288

Component 2 NEA - Externally set assignment 7202/X 40 96 192

A single entry is all that is needed for the non-exam assessments and certification.

For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

37

Art and Design: Graphic communication GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7243 ADV 7203 AS 601/4706/4 ADV 601/4456/7 n/a

Discount codes:

AS KS4 JA2 AS KS5 3550 ADV 3550 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Component 1 NEA - Portfolio 7243/C

7243 60 96 288

Component 2 NEA - Externally set assignment 7243/X 40 96 192

ADV Component 1 NEA - Personal investigation 7203/C

7203 60 96 288

Component 2 NEA - Externally set assignment 7203/X 40 96 192

A single entry is all that is needed for the non-exam assessments and certification.

For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

38

Art and Design: Photography GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7246 ADV 7206 AS 601/4706/4 ADV 601/4456/7 n/a

Discount codes:

AS KS4 KJ1 AS KS5 3570 ADV 3570 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Component 1 NEA – Portfolio 7246/C

7246 60 96 288

Component 2 NEA - Externally set assignment 7246/X 40 96 192

ADV Component 1 NEA - Personal investigation 7206/C

7206 60 96 288

Component 2 NEA - Externally set assignment 7206/X 40 96 192

A single entry is all that is needed for the non-exam assessments and certification.

For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

39

Art and Design: Textile design GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7244 ADV 7204 AS 601/4706/4 ADV 601/4456/7 n/a

Discount codes:

AS KS4 JA2 AS KS5 3650 ADV 3650 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Component 1 NEA - Portfolio 7244/C

7244 60 96 288

Component 2 NEA - Externally set assignment 7244/X 40 96 192

ADV Component 1 NEA - Personal investigation 7204/C

7204 60 96 288

Component 2 NEA - Externally set assignment 7204/X 40 96 192

A single entry is all that is needed for the non-exam assessments and certification.

For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

40

Art and Design: 3-D design GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7245 ADV 7205 AS 601/4706/4 ADV 601/4456/7 n/a

Discount codes:

AS KS4 JA2 AS KS5 3670 ADV 3670 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Component 1 NEA - Portfolio 7245/C

7245 60 96 288

Component 2 NEA - Externally set assignment 7245/X 40 96 192

ADV Component 1 NEA - Personal investigation 7205/C

7205 60 96 288

Component 2 NEA - Externally set assignment 7205/X 40 96 192

A single entry is all that is needed for the non-exam assessments and certification.

For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

41

Bengali outgoing spec GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s) (AS only):

2635 2635 AS 500/2319/6 ADV 500/2336/6 EBacc, Other

Discount codes:

AS KS4 FKB AS KS5 5930 ADV 5930 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Reading and writing BENG1 100 50 100

A2 Unit 2 Reading and writing BENG2 - 50 100

AS subject award BENG1 1636 - - 100

ADV subject award BENG1 + BENG2 2636 - - 200

This specification will be withdrawn after June 2019. A final re-sit opportunity will be available in June 2020.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1636, 2636 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

42

Biology GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):

AS 7401 ADV 7402 AS 601/4624/2 ADV 601/4625/4 EBacc, Other

Discount codes:

AS KS4 RH3 AS KS5 1010 ADV 1010 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 7401/1

7401 50 75

Paper 2 7401/2 50 75

ADV

Paper 1 7402/1

7402

35 91

Paper 2 7402/2 35 91

Paper 3 7402/3 30 78

Practical skills endorsement 7402/C - -

These specifications are not available to centres in Northern Ireland. For more information, see the Changes to exams section on page 7.

A single entry is all that is needed for examination papers, endorsement entry (where applicable) and certification.

If a candidate wishes to re-take the qualification, they may carry forward the endorsement provided the candidate has previously certified the same qualification. If a candidate has more than one previous attempt, the attempt that was used in the most recent award (including grades of ‘Not Classified’) will be carried forward. The endorsement may be carried forward across awarding bodies.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS specification is available to private candidates. It is expected that students undertaking the AS will carry out at least the six required practical activities in section 7.2 of the specification, and private candidates should make arrangements to complete sufficient practical work to fulfil this expectation. 15% of the marks in the AS papers will relate to practical work.

The Advanced specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8.2 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Entry codes 2018/19 - GCE

43

Business GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7131 ADV 7132 AS 601/4337/X ADV 601/4336/8 n/a

Discount codes:

AS KS4 AA3 AS KS5 3210 ADV 3210 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 Business 1 7131/1

7131 50 80

Paper 2 Business 2 7131/2 50 80

ADV

Paper 1 Business 1 7132/1

7132

33.3 100

Paper 2 Business 2 7132/2 33.3 100

Paper 3 Business 3 7132/3 33.3 100

A single entry is all that is needed for both examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

44

Chemistry GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):

AS 7404 ADV 7405 AS 601/5730/6 ADV 601/5731/8 Ebacc, Other

Discount codes:

AS KS4 RD1 AS KS5 1110 ADV 1110 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 7404/1

7404 50 80

Paper 2 7404/2 50 80

ADV

Paper 1 7405/1

7405

35 105

Paper 2 7405/2 35 105

Paper 3 7405/3 30 90

Practical skills endorsement 7405/C - -

These specifications are not available to centres in Northern Ireland. For more information, see the Changes to exams section on page 7.

A single entry is all that is needed for examination papers, endorsement entry (where applicable) and certification.

If a candidate wishes to re-take the qualification, they may carry forward the endorsement provided the candidate has previously certified the same qualification. If a candidate has more than one previous attempt, the attempt that was used in the most recent award (including grades of ‘Not Classified’) will be carried forward. The endorsement may be carried forward across awarding bodies.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS specification is available to private candidates. It is expected that students undertaking the AS will carry out at least the six required practical activities in section 7.2 of the specification, and private candidates should make arrangements to complete sufficient practical work to fulfil this expectation. 15% of the marks in the AS papers will relate to practical work.

The Advanced specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8.2 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Entry codes 2018/19 - GCE

45

Citizenship Studies Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2100 2100 AS 500/2590/9 ADV 500/2586/7 n/a

Discount codes: AS KS4 EE31 AS KS5 4910 ADV 4910 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Identity, Rights and Responsibilities CIST1 40 20 80

Unit 2 Democracy, Active Citizenship and Participation CIST2 60 30 120

A2 Unit 3 Power and Justice CIST3 - 25 100

Unit 4 Global Issues and Making a Difference CIST4 - 25 100

AS subject award CIST1 + CIST2 1101 - - 200

ADV subject award CIST1 + CIST2 + CIST3 + CIST4 2101 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1101, 2101 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

46

Classical Civilisation Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2020 2020 AS 500/2225/8 ADV 500/2226/X n/a

Discount codes: AS KS4 DB2B AS KS5 6530 ADV 6530 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS

Unit 1

Option A: Greek Architecture and Sculpture CIV1A 50 25 100

Option B: Athenian Democracy CIV1B 50 25 100

Option C: Aristophanes and Athens CIV1C 50 25 100

Option D: Women in Athens and Rome CIV1D 50 25 100

Option E: Menander and Plautus CIV1E 50 25 100

Option F: The Life and Times of Cicero CIV1F 50 25 100

Unit 2

Option A: Homer lliad CIV2A 50 25 100

Option B: Homer Odyssey CIV2B 50 25 100

Option C: Athenian Vase Painting CIV2C 50 25 100

Option D: Athenian Imperialism CIV2D 50 25 100

Option E: Roman Architecture and Town Planning CIV2E 50 25 100

Option F: The Second Punic War CIV2F 50 25 100

A2

Unit 3

Option A: Mycenaean Civilisation CIV3A - 25 100

Option B: The Persian Wars CIV3B - 25 100

Option C: Greek Tragedy CIV3C - 25 100

Option D: Augustus and the Foundation of the Principate CIV3D - 25 100

Unit 4

Option A: Socrates and Athens CIV4A - 25 100

Option B: Alexander CIV4B - 25 100

Option C: Roman Epic CIV4C - 25 100

Option D: Tiberius and Claudius CIV4D - 25 100

AS subject award one from CIV1A–CIV1F + one from CIV2A–CIV2F

1021 - - 200

ADV subject award one from CIV1A–CIV1F + one from CIV2A–CIV2F + one from CIV3A–CIV3D + one from CIV4A–CIV4D

2021 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1021, 2021 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

47

Communication and Culture Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2625 2625 AS 500/2243/X ADV 500/2248/9 n/a

Discount codes: AS KS4 KA1 AS KS5 5310 ADV 5310 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Understanding Communication and Culture COMM1 50 25 100

Unit 2 The Individual and Contemporary Culture Portfolio/web-folio COMM2 50 25 100

A2 Unit 3 Communicating Culture COMM3 - 25 100

Unit 4 Communication and Culture in Practice Portfolio/web-folio COMM4 - 25 100

AS subject award COMM1 + COMM2 1626 - - 200

ADV subject award COMM1 + COMM2 + COMM3 + COMM4 2626 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1626, 2626 as appropriate) if certification is required.

Details of all the elements on the portfolio/web-folio work for units 2 and 4 will be available on the subject page of our website http://www.aqa.org.uk/subjects/communication-and-culture under the ‘updates’ section in the year before the year of assessment.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCE

48

Computer Science GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7516 ADV 7517 AS 601/4699/0 ADV 601/4569/9 n/a

Discount codes:

AS KS4 CK11 AS KS5 26100 ADV 26100 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS

A - C# Paper 1 Programming (on-screen) 7516/1A

7516A 50 75 75

Paper 2 Data representation 7516/2 50 75 75

B - Java Paper 1 Programming (on-screen) 7516/1B

7516B 50 75 75

Paper 2 Data representation 7516/2 50 75 75

C - Pascal/Delphi Paper 1 Programming (on-screen) 7516/1C

7516C 50 75 75

Paper 2 Data representation 7516/2 50 75 75

D - Python Paper 1 Programming (on-screen) 7516/1D

7516D 50 75 75

Paper 2 Data representation 7516/2 50 75 75

E - VB.Net Paper 1 Programming (on-screen) 7516/1E

7516E 50 75 75

Paper 2 Data representation 7516/2 50 75 75

ADV

A - C#

Paper 1 Programming (on-screen) 7517/1A

7517A

40 100 150

Paper 2 Data representation 7517/2 40 100 150

NEA Computing practical project 7517/C 20 75 75

B - Java

Paper 1 Programming (on-screen) 7517/1B

7517B

40 100 150

Paper 2 Data representation 7517/2 40 100 150

NEA Computing practical project 7517/C 20 75 75

C - Pascal/Delphi

Paper 1 Programming (on-screen) 7517/1C

7517C

40 100 150

Paper 2 Data representation 7517/2 40 100 150

NEA Computing practical project 7517/C 20 75 75

D - Python

Paper 1 Programming (on-screen) 7517/1D

7517D

40 100 150

Paper 2 Data representation 7517/2 40 100 150

NEA Computing practical project 7517/C 20 75 75

E - VB.Net

Paper 1 Programming (on-screen) 7517/1E

7517E

40 100 150

Paper 2 Data representation 7517/2 40 100 150

NEA Computing practical project 7517/C 20 75 75

(continued on next page)

Entry codes 2018/19 - GCE

49

Computer Science (continued) GCE

Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

50

Creative Writing Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2750 2750 AS 600/7746/3 ADV 600/7745/1 n/a

Discount codes: AS KS4 KC3 AS KS5 5230 ADV 5230 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Writing On Demand CREW1 40 20 80

Unit 2 Exploring Creative Writing Coursework CREW2 60 30 120

A2 Unit 3 From Reading to Writing CREW3 - 20 80

Unit 4 The Writing Portfolio Coursework CREW4 - 30 120

AS subject award CREW1 + CREW2 1751 - - 200

ADV subject award CREW1 + CREW2 + CREW3 + CREW4 2751 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1751, 2751 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCE

51

Dance GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7236 ADV 7237 AS 601/8298/2 ADV 601/8297/0 n/a

Discount codes:

AS KS4 LB1 AS KS5 7230 ADV 7230 Entry

code

June 2019 6A19

21/2/19

AS NEA Performance and choreography

(marked by AQA) 7236/X 7236

50 80

Paper Critical engagement 7236/W 50 80

ADV NEA Performance and choreography

(marked by AQA) 7237/X 7237

50 80

Paper Critical engagement 7237/W 50 100

A single entry is all that is needed for the examination paper, non-exam assessment and certification.

Examiner visits (1 March – 31 May) are arranged based on Estimated Entries. You must submit estimates to receive a visit.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates provided that the centre is able to supervise and authenticate the non-exam assessment.

.

Entry codes 2018/19 - GCE

52

Design and Technology: new spec Fashion and Textiles GCE

Series availability

Weight %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7561 ADV 7562 AS 603/1107/1 ADV 603/1104/6 n/a

Discount codes:

AS KS4 XA5A AS KS5 9050 ADV 9050 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 7561/W

7561 50 80

NEA 7561/C 50 80

ADV

Paper 1 7562/1

7562

30 120

Paper 2 7562/2 20 80

NEA 7562/C 50 100

A single entry is all that is needed for examination paper(s), non-exam assessments and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

53

Design and Technology: Final re-sit opportunity Food Technology GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2540 2540 AS 500/2219/2 ADV 500/2218/0 n/a

Discount codes: AS KS4 NH6 AS KS5 9020 ADV 9020 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Materials, Components and Application FOOD1 50 25 100

Unit 2 Learning Through Designing and Making Coursework FOOD2 50 25 100

A2 Unit 3 Design and Manufacture FOOD3 - 25 100

Unit 4 Designing and Making Practice Coursework FOOD4 - 25 100

AS subject award FOOD1 + FOOD2 1541 - - 200

ADV subject award FOOD1 + FOOD2 + FOOD3 + FOOD4 2541 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1541, 2541 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates where:

• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)

or

• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award

Entry codes 2018/19 - GCE

54

Design and Technology: Final re-sit opportunity Product Design (3-D Design) GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2550 2550 AS 500/2216/7 ADV 500/2215/5 n/a

Discount codes: AS KS4 VF2 AS KS5 9080 ADV 9080 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Materials, Components and Application PROD1 50 25 100

Unit 2 Learning Through Designing and Making Coursework PROD2 50 25 100

A2 Unit 3 Design and Manufacture PROD3 - 25 100

Unit 4 Designing and Making Practice Coursework PROD4 - 25 100

AS subject award PROD1 + PROD2 1551 - - 200

ADV subject award PROD1 + PROD2 + PROD3 + PROD4 2551 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1551, 2551 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates where:

• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)

or

• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award

Entry codes 2018/19 - GCE

55

Design and Technology: Final re-sit opportunity Product Design (Textiles) GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2560 2560 AS 500/2253/2 ADV 500/2241/6 n/a

Discount codes: AS KS4 XA5A AS KS5 9050 ADV 9050 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Materials, Components and Application TEXT1 50 25 100

Unit 2 Learning Through Designing and Making Coursework TEXT2 50 25 100

A2 Unit 3 Design and Manufacture TEXT3 - 25 100

Unit 4 Designing and Making Practice Coursework TEXT4 - 25 100

AS subject award TEXT1 + TEXT2 1561 - - 200

ADV subject award TEXT1 + TEXT2 + TEXT3 + TEXT4 2561 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1561, 2561 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates where:

• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)

or

• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award

Entry codes 2018/19 - GCE

56

Design and Technology: Product Design new spec GCE

Series availability

Weight %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7551 ADV 7552 AS 603/1108/3 ADV 603/1133/2 n/a

Discount codes:

AS KS4 VF2 AS KS5 9080 ADV 9080 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 7551/W

7551 50 80

NEA 7551/C 50 80

ADV

Paper 1 7552/1

7552

30 120

Paper 2 7552/2 20 80

NEA 7552/C 50 100

A single entry is all that is needed for examination paper(s), non-exam assessments and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

57

Design and Technology: Final re-sit opportunity Systems and Control Technology GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2555 2555 AS 500/2217/9 ADV 500/2186/2 n/a

Discount codes: AS KS4 WA2 AS KS5 9060 ADV 9060 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Materials, Components and Application SYST1 50 25 100

Unit 2 Learning Through Designing and Making Coursework SYST2 50 25 100

A2 Unit 3 Design and Manufacture SYST3 - 25 100

Unit 4 Designing and Making Practice Coursework SYST4 - 25 100

AS subject award SYST1 + SYST2 1556 - - 200

ADV subject award SYST1 + SYST2 + SYST3 + SYST4 2556 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1556, 2556 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates where:

• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)

or

• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award

Entry codes 2018/19 - GCE

58

Drama and Theatre GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7261 ADV 7262 AS 601/8585/5 ADV 601/8494/2 n/a

Discount codes:

AS KS4 LC11 AS KS5 5210 ADV 5210 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Paper Interpreting drama 7261/W

7261 40 80 80

NEA Process and performance 7261/C 60 60 120

ADV

Paper 1 Drama and theatre 7262/W

7262

40 80 80

NEA Creating original drama 7262/C 30 60 60

NEA Making theatre (marked by AQA) 7262/X 30 60 60

A single entry is all that is needed for examination papers, non-exam assessments and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

59

Economics GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7135 ADV 7136 AS 601/4372/1 ADV 601/4371/X n/a

Discount codes:

AS KS4 EB AS KS5 4410 ADV 4410 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 The Operation of Markets and Market Failure 7135/1

7135 50 70

Paper 2 The National Economy in a Global Context 7135/2 50 70

ADV

Paper 1 Markets and Market Failure 7136/1

7136

33.3 80

Paper 2 National and International Economy 7136/2 33.3 80

Paper 3 Economic Principles and Issues 7136/3 33.3 80

A single entry is all that is needed for both examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

60

Electronics Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2430 2430 AS 500/2355/X ADV 500/2341/X n/a

Discount codes:

AS KS4 RC52 AS KS5 1730 ADV 1730 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS

Unit 1 Introductory Electronics ELEC1 35 17.5 105

Unit 2 Further Electronics ELEC2 35 17.5 105

Unit 3 Practical System Development Coursework ELEC3 30 15 90

A2

Unit 4 Programmable Control Systems ELEC4 - 17.5 105

Unit 5 Communications Systems ELEC5 - 17.5 105

Unit 6 Practical System Synthesis Coursework ELEC6 - 15 90

AS subject award ELEC1 + ELEC2 + ELEC3 1431 - - 300

ADV subject award ELEC1 + ELEC2 + ELEC3 + ELEC4 + ELEC5 + ELEC6

2431 - - 600

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1431, 2431 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Private candidates wishing to submit coursework for assessment must make arrangements for their work to be authenticated. Details of their authentication arrangements must be submitted to us using a Private candidate coursework information form at the time their entry request is made. Please see our website aqa.org.uk/private for further details.

Entry codes 2018/19 - GCE

61

English Language GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7701 ADV 7702 AS 601/4846/9 ADV 601/4640/0 English, Other

Discount codes:

AS KS4 FK2B AS KS5 5030 ADV 5030 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Paper 1 Language and the Individual 7701/1

7701 50 70 70

Paper 2 Language Varieties 7701/2 50 70 70

ADV

Paper 1 Language, the Individual and Society 7702/1

7702

40 100 200

Paper 2 Language Diversity and Change 7702/2 40 100 200

NEA Language in Action 7702/C 20 100 100

A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS specification is available to private candidates.

The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.

Entry codes 2018/19 - GCE

62

English Language and Literature GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7706 ADV 7707 AS 601/4642/4 ADV 601/4641/2 n/a

Discount codes:

AS KS4 FK2A AS KS5 5010 ADV 5010 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 Views and Voices 7706/1

7706 50 75

Paper 2 People and Places 7706/2 50 75

ADV

Paper 1 Telling Stories 7707/1

7707

40 100

Paper 2 Exploring Conflict 7707/2 40 100

NEA Making Connections 7707/C 20 50

A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS specification is available to private candidates.

The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.

Entry codes 2018/19 - GCE

63

English Literature A GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7711 ADV 7712 AS 601/5259/X ADV 601/5327/1 English, Other

Discount codes:

AS KS4 FC4 AS KS5 5110 ADV 5110 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Paper 1 Love through the Ages: Shakespeare and

Poetry 7711/1 7711

50 50 50

Paper 2 Love through the Ages: Prose 7711/2 50 50 50

ADV

A

Paper 1 Love through the Ages 7712/1

7712A

40 75 150

Paper 2 Texts in Shared Contexts: WW1 and its Aftermath 7712/2A 40 75 150

NEA Independent Critical Study: Texts across Time 7712/C 20 50 75

B

Paper 1 Love through the Ages 7712/1

7712B

40 75 150

Paper 2 Texts in Shared Contexts: Modern Times: Literature from 1945 to the Present Day

7712/2B 40 75 150

NEA Independent Critical Study: Texts across Time 7712/C 20 50 75

Candidates wishing to take the Advanced qualification will only be allowed to enter for one of the two Advanced options (A or B) per series.

A single entry is all that is needed for both examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS specification is available to private candidates.

The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.

Entry codes 2018/19 - GCE

64

English Literature B GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7716 ADV 7717 AS 601/5257/6 ADV 601/5328/3 English, Other

Discount codes:

AS KS4 FC4 AS KS5 5110 ADV 5110 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS

AA Paper 1 Drama: Tragedy 7716/1A

7716AA 50 50 50

Paper 2 Prose and Poetry: Tragedy 7716/2A 50 50 50

AB Paper 1 Drama: Tragedy 7716/1A

7716AB 50 50 50

Paper 2 Prose and Poetry: Comedy 7716/2B 50 50 50

BA Paper 1 Drama: Comedy 7716/1B

7716BA 50 50 50

Paper 2 Prose and Poetry: Tragedy 7716/2A 50 50 50

BB Paper 1 Drama: Comedy 7716/1B

7716BB 50 50 50

Paper 2 Prose and Poetry: Comedy 7716/2B 50 50 50

ADV

AA

Paper 1 Literary Genres: Tragedy 7717/1A

7717AA

40 75 300

Paper 2 Texts and Genres: Crime Writing 7717/2A 40 75 300

NEA Theory and Independence 7717/C 20 50 150

AB

Paper 1 Literary Genres: Tragedy 7717/1A

7717AB

40 75 300

Paper 2 Texts and Genres: Political Writing 7717/2B 40 75 300

NEA Theory and Independence 7717/C 20 50 150

BA

Paper 1 Literary Genres: Comedy 7717/1B

7717BA

40 75 300

Paper 2 Texts and Genres: Crime Writing 7717/2A 40 75 300

NEA Theory and Independence 7717/C 20 50 150

BB

Paper 1 Literary Genres: Comedy 7717/1B

7717BB

40 75 300

Paper 2 Texts and Genres: Political Writing 7717/2B 40 75 300

NEA Theory and Independence 7717/C 20 50 150

Candidates may only enter for one of the AS and/or Advanced entry options per series. A single entry is all that is needed for both examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS specification is available to private candidates.

The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.

Entry codes 2018/19 - GCE

65

Environmental Science new spec GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7446 ADV 7447 AS 603/0977/5 ADV 603/0978/7 n/a

Discount codes:

AS KS4 QA3 AS KS5 1750 ADV 1750 Entry

code

June 2019 6A19

21/2/19

AS Written paper 7446 7446 100 120

ADV Paper 1 7447/1

7447 50 120

Paper 2 7447/2 50 120

A single entry is all that is needed for the examination paper(s) and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates. Centres accepting private candidates must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Environmental Studies Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2440 2440 AS 500/2521/1 ADV 500/2513/2 n/a

Discount codes: AS KS4 QA3 AS KS5 1750 ADV 1750 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 The Living Environment ENVS1 40 20 80

Unit 2 The Physical Environment ENVS2 60 30 120

A2 Unit 3 Energy Resources and Environmental Pollution ENVS3 - 25 100

Unit 4 Biological Resources and Sustainability ENVS4 - 25 100

AS subject award ENVS1 + ENVS2 1441 - - 200

ADV subject award ENVS1 + ENVS2 + ENVS3 + ENVS4 2441 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1441, 2441 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

66

French GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):

AS 7651 ADV 7652 AS 601/8726/8 ADV 601/8727/X Ebacc, Other

Discount codes:

AS KS4 FKF AS KS5 5650 ADV 5650 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS

T

Paper 1 Listening, reading and writing 7651/1

7651T

45 90 90

Paper 2 Writing 7651/2 25 50 50

NEA Teacher conducted speaking test (marked by AQA) 7651/3T 30 60 60

V

Paper 1 Listening, reading and writing 7651/1

7651V

45 90 90

Paper 2 Writing 7651/2 25 50 50

NEA Visiting examiner conducted speaking test (marked by AQA) 7651/3V 30 60 60

ADV

T

Paper 1 Listening, reading and writing 7652/1

7652T

50 100 200

Paper 2 Writing 7652/2 20 80 80

NEA Teacher conducted speaking test (marked by AQA) 7652/3T 30 60 120

V

Paper 1 Listening, reading and writing 7652/1

7652V

50 100 200

Paper 2 Writing 7652/2 20 80 80

NEA Visiting examiner conducted speaking test (marked by AQA) 7652/3V 30 60 120

Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

Speaking tests:

• Teacher conducted options Centres must submit candidates’ speaking tests on CD or memory stick.

• Visiting examiner options Centres who request a visiting examiner must meet the requirement for a minimum of ten candidates.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates provided they attend an AQA approved centre willing to make arrangements for conducting the speaking tests. For the A-level specification, that centre must also be prepared to supervise and authenticate the individual research project.

Entry codes 2018/19 - GCE

67

Further Mathematics new spec GCE

Series availability

Weight %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):

AS 7366 ADV 7367 AS 603/1604/4 ADV 603/1841/7 Maths, Other

Discount codes:

AS KS4 RB1A AS KS5 2330 ADV 2330 Entry

code

June 2019 6A19

21/2/19

AS

Discrete and Statistics

Paper 1 7366/1

7366DS

50 80

Paper 2 Discrete 7366/2D 25 40

Statistics 7366/2S 25 40

Statistics and Mechanics

Paper 1 7366/1

7366SM

50 80

Paper 2 Statistics 7366/2S 25 40

Mechanics 7366/2M 25 40

Mechanics and Discrete

Paper 1 7366/1

7366MD

50 80

Paper 2 Mechanics 7366/2M 25 40

Discrete 7366/2D 25 40

ADV

Discrete and Statistics

Paper 1 7367/1

7367DS

33⅓ 100

Paper 2 7367/2 33⅓ 100

Paper 3 Discrete 7367/3D 16⅔ 50

Statistics 7367/3S 16⅔ 50

Statistics and Mechanics

Paper 1 7367/1

7367SM

33⅓ 100

Paper 2 7367/2 33⅓ 100

Paper 3 Statistics 7367/3S 16⅔ 50

Mechanics 7367/3M 16⅔ 50

Mechanics and Discrete

Paper 1 7367/1

7367MD

33⅓ 100

Paper 2 7367/2 33⅓ 100

Paper 3 Mechanics 7367/3M 16⅔ 50

Discrete 7367/3D 16⅔ 50

Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

68

General Studies A Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2760 2760 AS 500/2222/2 ADV 500/2184/9 n/a

Discount codes: AS KS4 EA3 AS KS5 7810 ADV 7810 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 AS Culture and Society GENA1/1 Objective test

GENA1/2 Written paper GENA1 50 25 100

Unit 2 AS Science and Society GENA2/1 Objective test GENA2/2 Written paper GENA2 50 25 100

A2 Unit 3 A2 Culture and Society GENA3 - 25 100

Unit 4 A2 Science and Society GENA4 - 25 100

AS subject award GENA1 + GENA2 1761 - - 200

ADV subject award GENA1 + GENA2 + GENA3 + GENA4 2761 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1761, 2761 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

69

General Studies B Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2765 2765 AS 500/2242/8 ADV 500/2223/4 n/a

Discount codes: AS KS4 EA3 AS KS5 7810 ADV 7810 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Conflict GENB1 50 25 100

Unit 2 Space GENB2 50 25 100

A2 Unit 3 Power GENB3 - 25 100

Unit 4 Change GENB4 - 25 100

AS subject award GENB1 + GENB2 1766 - - 200

ADV subject award GENB1 + GENB2 + GENB3 + GENB4 2766 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1766, 2766 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

70

Geography GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7036 ADV 7037 AS 601/8971/X ADV 601/8940/X n/a

Discount codes:

AS KS4 RF4 AS KS5 3910 ADV 3910 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Paper 1 Physical geography and

people and the environment 7036/1 7036 50 80 80

Paper 2 Human geography and Geography fieldwork investigation 7036/2 50 80 80

ADV

Paper 1 Physical geography 7037/1

7037

40 120 120

Paper 2 Human geography 7037/2 40 120 120

NEA Geography fieldwork investigation 7037/C 20 60 60

A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS specification is available to private candidates. Private candidates wishing to undertake the AS must undertake two days of geographical fieldwork in relation to processes in both physical and human geography. The centre will require evidence to prove that this has been done (for example photos or data that has been collected).

The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.

Centres accepting private candidates for either the AS or Advanced specification must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Entry codes 2018/19 - GCE

71

German GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):

AS 7661 ADV 7662 AS 601/8728/1 ADV 601/8729/3 Ebacc, Other

Discount codes:

AS KS4 FKG AS KS5 5670 ADV 5670 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS

T

Paper 1 Listening, reading and writing 7661/1

7661T

45 90 90

Paper 2 Writing 7661/2 25 50 50

NEA Teacher conducted speaking test (Marked by AQA) 7661/3T 30 60 60

V

Paper 1 Listening, reading and writing 7661/1

7661V

45 90 90

Paper 2 Writing 7661/2 25 50 50

NEA Visiting examiner conducted speaking test (Marked by AQA)

7661/3V 30 60 60

ADV

T

Paper 1 Listening, reading and writing 7662/1

7662T

50 100 200

Paper 2 Writing 7662/2 20 80 80

NEA Teacher conducted speaking test (Marked by AQA) 7662/3T 30 60 120

V

Paper 1 Listening, reading and writing 7662/1

7662V

50 100 200

Paper 2 Writing 7662/2 20 80 80

NEA Visiting examiner conducted speaking test (Marked by AQA)

7662/3V 30 60 120

Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers and certification.

Speaking tests:

• Teacher conducted options Centres must submit candidates’ speaking tests on CD or memory stick.

• Visiting examiner options Centres who request a visiting examiner must meet the requirement for a minimum of ten candidates.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates provided they attend an AQA approved centre willing to make arrangements for conducting the speaking tests. For the A-level specification, that centre must also be prepared to supervise and authenticate the individual research project.

Entry codes 2018/19 - GCE

72

Government and Politics Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2150 2150 AS 500/2481/4 ADV 500/2480/2 n/a

Discount codes: AS KS4 EA AS KS5 4830 ADV 4830 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 People, Politics and Participation GOVP1 50 25 100

Unit 2 Governing Modern Britain GOVP2 50 25 100

A2

Unit 3 Option A: The Politics of the USA GOV3A - 25 100

Option B: Ideologies GOV3B - 25 100

Unit 4 Option A: The Government of the USA GOV4A - 25 100

Option B: Political Issues: Ideologies in Action GOV4B - 25 100

AS subject award GOVP1 + GOVP2 1151 - - 200

ADV subject award GOVP1 + GOVP2 + GOV3A or GOV3B or GOV3C* + GOV4A or GOV4B or GOV4C*

2151 - - 400

* Candidates must have a result from a previous series.

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1151, 2151 as appropriate) if certification is required.

Unit GOV3C (Politics and Power) and GOV4C (Perspectives on Modern Politics) were last offered in the January 2012 series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Politics new spec GCE

See page 96

Entry codes 2018/19 - GCE

73

Health and Social Care Final re-sit opportunity GCE

Series availability

Specification code Basedata group code Qualification numbers:

AS single AS double ADV single ADV double

Attainment 8 measure(s)

2820 2820 600/5259/4 600/5258/2 600/5257/0 600/5256/9 n/a

Discount codes: AS single KS4 AS single KS5 AS double KS4 AS double KS5 ADV single ADV double

PA1 0003 PA1 0003 0003 0003

Entry code

June 2019 6A19

21/2/19

AS sgl

AS dbl

ADV sgl

ADV dbl

Max UMS

AS

Unit 1 Effective Care and Communication Portfolio HSC01 50 25 25 12.5 100

Unit 2 Understanding Health Conditions and Patient Care Pathways HSC02 50 25 25 12.5 100

Unit 3 Life as a Challenge HSC03 50 25 25 12.5 100

Unit 4 Educating Children and Young People Portfolio HSC04 - 25 - 12.5 100

A2

Unit 5 Learning and Development HSC05 - - 25 12.5 100

Unit 6 Practitioner Roles Portfolio HSC06 - - 25 12.5 100

Unit 7 Food and Fitness HSC07 - - 25 12.5 100

Unit 8 Using and Understanding Research Portfolio HSC08 - - - 12.5 100

Unit 9 Understanding Mental Disorders Portfolio HSC09 - - - 12.5 100

Unit 10 Diagnosis, Treatment and Preventative Strategies HSC10 - - 25 12.5 100

AS single subject award HSC01 + HSC02 or HSC03

1821 - - - - 200

AS double subject award HSC01 + HSC02 + HSC03 + HSC04

1822 - - - - 400

ADV single subject award HSC01 + HSC02 or HSC03 + HSC06 + HSC05 or HSC07 or HSC10

2821 - - - - 400

ADV double subject award HSC01 + HSC02 + HSC03 + HSC04 + HSC06 + three from HSC05, HSC07, HSC08, HSC09, HSC10 which must include at least two from HSC05, HSC07, HSC10

2822 - - - - 800

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1821, 1822, 2821, 2822 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCE

74

History GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers:

AS 7041 ADV 7042 AS 601/4974/7 ADV 601/4973/5

Discount codes: Attainment 8

(AS only):

AS KS4 DB AS KS5 4010 ADV 4010 Measure(s): Ebacc, Other

Entry code

June 2019 6A19

21/2/19

AS Paper 1 Breadth Study - one of the AS paper 1 options A-L see

notes below

50 50

Paper 2 Depth Study - one of the AS paper 2 options A-T 50 50

ADV

Paper 1 Breadth Study - one of the Advanced paper 1 options A-L see

notes below

40 80

Paper 2 Depth Study - one of the Advanced paper 2 options A-T 40 80

NEA Historical Investigation (Personal Study) 20 40

AS components Component (* indicates a British history option)

AS Paper 1 Breadth study

1A The Age of the Crusades, c1071-1149 7041/1A 1B Spain in the Age of Discovery, 1469–1556 7041/1B 1C* The Tudors: England, 1485–1547 7041/1C 1D* Stuart Britain and the Crisis of Monarchy, 1603–1649 7041/1D 1E Russia in the Age of Absolutism and Enlightenment, 1682–1725 7041/1E 1F* Industrialisation and the People: Britain, c1783–1832 7041/1F 1G* Challenge and Transformation: Britain, c1851–1914 7041/1G 1H Tsarist and Communist Russia, 1855–1917 7041/1H 1J* The British Empire, c1857–1914 7041/1J 1K The Making of a Superpower: USA, 1865–1920 7041/1K 1L The Quest for Political Stability: Germany, 1871–1929 7041/1L

AS Paper 2 Depth study

2A* Royal Authority and the Angevin Kings, 1154–1189 7041/2A 2B* The Wars of the Roses, 1450–1471 7041/2B 2C The Reformation in Europe, c1500–1531 7041/2C 2D* Religious Conflict and the Church in England, c1529–c1547 7041/2D 2E* The English Revolution, 1625–1642 7041/2E 2F The Sun King: Louis XIV, France and Europe, 1643–1685 7041/2F 2G The Birth of the USA, 1760–1776 7041/2G 2H France in Revolution, 1774–1795 7041/2H 2J America: A Nation Divided, c1845–1861 7041/2J 2K International Relations and Global Conflict, c1890–1917 7041/2K 2L Italy and Fascism, c1900–1926 7041/2L 2M* Wars and Welfare: Britain in Transition, 1906–1929 7041/2M 2N Revolution and Dictatorship: Russia and the Soviet Union, 1917–1929 7041/2N 2O Democracy and Nazism: Germany, 1918–1933 7041/2O 2P The Transformation of China, 1936–1962 7041/2P 2Q The American Dream: Reality and Illusion, 1945–1963 7041/2Q 2R The Cold War, c1945–1963 7041/2R 2S* The Making of Modern Britain, 1951–1979 7041/2S 2T The Crisis of Communism: The USSR, 1953–2000 7041/2T

Entry codes 2018/19 - GCE

75

AS notes

Candidates may only enter for one of the AS entry options per series. A single entry is all that is needed for both examination papers and certification.

Candidates must be assessed in one British history option (indicated by an asterisk*) and one non-British history option. In addition the following combinations of papers are not permitted: • 1C cannot be combined with 2C • 1D cannot be combined with 2F

AS entry codes

These are generated as follows: • the first four characters are the AS specification code 7041 • the fifth character is the letter that indicates the paper 1 option • the last character is the letter that indicates the paper 2 option. The table below shows all the valid combinations of papers and associated AS entry codes. An asterisk* indicates a British history option.

AS Paper 1 – Breadth Study

1A 1B 1C* 1D* 1E 1F* 1G* 1H 1J* 1K 1L

AS P

aper

2 –

Dep

th S

tudy

2A* 7041AA 7041BA - - 7041EA - - 7041HA - 7041KA 7041LA

2B* 7041AB 7041BB - - 7041EB - - 7041HB - 7041KB 7041LB

2C - - - 7041DC - 7041FC 7041GC - 7041JC - -

2D* 7041AD 7041BD - - 7041ED - - 7041HD - 7041KD 7041LD

2E* 7041AE 7041BE - - 7041EE - - 7041HE - 7041KE 7041LE

2F - - 7041CF - - 7041FF 7041GF - 7041JF - -

2G - - 7041CG 7041DG - 7041FG 7041GG - 7041JG - -

2H - - 7041CH 7041DH - 7041FH 7041GH - 7041JH - -

2J - - 7041CJ 7041DJ - 7041FJ 7041GJ - 7041JJ - -

2K - - 7041CK 7041DK - 7041FK 7041GK - 7041JK - -

2L - - 7041CL 7041DL - 7041FL 7041GL - 7041JL - -

2M* 7041AM 7041BM - - 7041EM - - 7041HM - 7041KM 7041LM

2N - - 7041CN 7041DN - 7041FN 7041GN - 7041JN - -

2O - - 7041CO 7041DO - 7041FO 7041GO - 7041JO - -

2P - - 7041CP 7041DP - 7041FP 7041GP - 7041JP - -

2Q - - 7041CQ 7041DQ - 7041FQ 7041GQ - 7041JQ - -

2R - - 7041CR 7041DR - 7041FR 7041GR - 7041JR - -

2S* 7041AS 7041BS - - 7041ES - - 7041HS - 7041KS 7041LS

2T - - 7041CT 7041DT - 7041FT 7041GT - 7041JT - -

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS specification is available to private candidates.

Entry codes 2018/19 - GCE

76

Advanced components Component (* indicates a British history option)

ADV Paper 1 Breadth study

1A The Age of the Crusades, c1071–1204 7042/1A 1B Spain in the Age of Discovery, 1469–1598 7042/1B 1C* The Tudors: England, 1485–1603 7042/1C 1D* Stuart Britain and the Crisis of Monarchy, 1603–1702 7042/1D 1E Russia in the Age of Absolutism and Enlightenment, 1682–1796 7042/1E 1F* Industrialisation and the People: Britain, c1783–1885 7042/1F 1G* Challenge and Transformation: Britain, c1851–1964 7042/1G 1H Tsarist and Communist Russia, 1855–1964 7042/1H 1J* The British Empire, c1857–1967 7042/1J 1K The Making of a Superpower: USA, 1865–1975 7042/1K 1L The Quest for Political Stability: Germany, 1871–1991 7042/1L

ADV Paper 2 Depth study

2A* Royal Authority and the Angevin Kings, 1154–1216 7042/2A 2B* The Wars of the Roses, 1450–1499 7042/2B 2C The Reformation in Europe, c1500–1564 7042/2C 2D* Religious Conflict and the Church in England, c1529–c1570 7042/2D 2E* The English Revolution, 1625–1660 7042/2E 2F The Sun King: Louis XIV, France and Europe, 1643–1715 7042/2F 2G The Birth of the USA, 1760–1801 7042/2G 2H France in Revolution, 1774–1815 7042/2H 2J America: A Nation Divided, c1845–1877 7042/2J 2K International Relations and Global Conflict, c1890–1941 7042/2K 2L Italy and Fascism, c1900–1945 7042/2L 2M* Wars and Welfare: Britain in Transition, 1906–1957 7042/2M 2N Revolution and Dictatorship: Russia, 1917–1953 7042/2N 2O Democracy and Nazism: Germany, 1918–1945 7042/2O 2P The Transformation of China, 1936–1997 7042/2P 2Q The American Dream: Reality and Illusion, 1945–1980 7042/2Q 2R The Cold War, c1945–1991 7042/2R 2S* The Making of Modern Britain, 1951–2007 7042/2S 2T The Crisis of Communism: The USSR and the Soviet Empire, 1953–2000 7042/2T

NEA Historical Investigation (Personal Study) 7042/C Advanced notes

Candidates may only enter for one of the Advanced entry options per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

Candidates must be assessed in one British history option (indicated by an asterisk*) and one non-British history option. In addition the following combinations of papers are not permitted: • 1C cannot be combined with 2C • 1D cannot be combined with 2F

There is an additional requirement of the Advanced level specification that candidates must cover a chronological range of at least 200 years through the topics assessed in paper 1 + paper 2 + NEA.

If a student wishes to carry forward, they must either re-take the same written exam options as the original attempt, or confirm that the new options still comply with the requirements of the specification (ie there is no overlap of content between the original NEA and the new exam options, and that all three components together cover a chronological range of at least 200 years).

Entry codes 2018/19 - GCE

77

Advanced entry codes

These are generated as follows: • the first four characters are the Advanced specification code 7042 • the fifth character is the letter that indicates the paper 1 option • the last character is the letter that indicates the paper 2 option. The table below shows all the valid combinations of papers and associated Advanced entry codes. An asterisk* indicates a British history option.

Advanced Paper 1 – Breadth Study

1A 1B 1C* 1D* 1E 1F* 1G* 1H 1J* 1K 1L

Adva

nced

Pap

er 2

– D

epth

Stu

dy

2A* 7042AA 7042BA - - 7042EA - - 7042HA - 7042KA 7042LA

2B* 7042AB 7042BB - - 7042EB - - 7042HB - 7042KB 7042LB

2C - - - 7042DC - 7042FC 7042GC - 7042JC - -

2D* 7042AD 7042BD - - 7042ED - - 7042HD - 7042KD 7042LD

2E* 7042AE 7042BE - - 7042EE - - 7042HE - 7042KE 7042LE

2F - - 7042CF - - 7042FF 7042GF - 7042JF - -

2G - - 7042CG 7042DG - 7042FG 7042GG - 7042JG - -

2H - - 7042CH 7042DH - 7042FH 7042GH - 7042JH - -

2J - - 7042CJ 7042DJ - 7042FJ 7042GJ - 7042JJ - -

2K - - 7042CK 7042DK - 7042FK 7042GK - 7042JK - -

2L - - 7042CL 7042DL - 7042FL 7042GL - 7042JL - -

2M* 7042AM 7042BM - - 7042EM - - 7042HM - 7042KM 7042LM

2N - - 7042CN 7042DN - 7042FN 7042GN - 7042JN - -

2O - - 7042CO 7042DO - 7042FO 7042GO - 7042JO - -

2P - - 7042CP 7042DP - 7042FP 7042GP - 7042JP - -

2Q - - 7042CQ 7042DQ - 7042FQ 7042GQ - 7042JQ - -

2R - - 7042CR 7042DR - 7042FR 7042GR - 7042JR - -

2S* 7042AS 7042BS - - 7042ES - - 7042HS - 7042KS 7042LS

2T - - 7042CT 7042DT - 7042FT 7042GT - 7042JT - -

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The Advanced specification is available to private candidates.

Entry codes 2018/19 - GCE

78

History of Art Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2250 2250 AS 500/2227/1 ADV 500/2224/6 n/a

Discount codes: AS KS4 JA33 AS KS5 3830 ADV 3830 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Visual Analysis and Interpretation HART1 40 20 80

Unit 2 Themes in History of Art HART2 60 30 120

A2 Unit 3 Investigation and Interpretation (1) HART3 - 25 100

Unit 4 Investigation and Interpretation (2) HART4 - 25 100

AS subject award HART1 + HART2 1251 - - 200

ADV subject award HART1 + HART2 + HART3 + HART4 2251 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1251, 2251 as appropriate) if certification is required in June 2019.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

79

Information and Final re-sit opportunity Communication Technology GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2520 2520 AS 500/2437/1 ADV 500/2349/4 n/a

Discount codes: AS KS4 CJ AS KS5 2650 ADV 2650 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Practical Problem Solving in the Digital World INFO1 50 25 100

Unit 2 Living in the Digital World INFO2 50 25 100

A2 Unit 3 The Use of ICT in the Digital World INFO3 - 30 120

Unit 4 Practical Issues Involved in the Use of ICT in the Digital World Coursework INFO4 - 20 80

AS subject award INFO1 + INFO2 1521 - - 200

ADV subject award INFO1 + INFO2 + INFO3 + INFO4 2521 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1521, 2521 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS units of this specification are available to private candidates. The A2 units of this specification are not available to private candidates.

Entry codes 2018/19 - GCE

80

Law Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2160 2160 AS 500/2324/X ADV 500/2330/5 n/a

Discount codes: AS KS4 EC1 AS KS5 4770 ADV 4770 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Law Making and the Legal System LAW01 50 25 100

Unit 2 The Concept of Liability LAW02 50 25 100

A2 Unit 3 Either Criminal Law (Offences against the Person)

or Contract Law LAW03 - 25 100

Unit 4 Either Criminal Law (Offences against Property) or Tort and Concepts of Law LAW04 - 25 100

AS subject award LAW01 + LAW02 1161 - - 200

ADV subject award LAW01 + LAW02 + LAW03 + LAW04 2161 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1161, 2161 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

81

Law new spec GCE

Series availability

Weight %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7161 ADV 7162 AS 603/1008/X ADV 603/1009/1 n/a

Discount codes:

AS KS4 EC1 AS KS5 4770 ADV 4770

Entry code

June 2019 6A19

21/2/19

AS Paper 1 7161/1

7161 50 80

Paper 2 7161/2 50 80

ADV

A - Contract

Paper 1 7162/1

7162A

33⅓ 100

Paper 2 7162/2 33⅓ 100

Paper 3A Contract 7162/3A 33⅓ 100

B – Human rights

Paper 1 7162/1

7162B

33⅓ 100

Paper 2 7162/2 33⅓ 100

Paper 3B Human Rights 7162/3B 33⅓ 100

A single entry is all that is needed for examination papers and certification. Candidates may enter for only one of the Advanced options per series.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

82

Mathematics Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Maths AS Maths ADV Pure AS Pure ADV Further AS Further ADV Attainment 8 measure(s) (AS only):

6360 6360 100/3405/5 100/3408/0 100/6005/4 100/6006/6 100/6004/2 100/6007/8 Maths, Other

Discount codes: Maths AS KS4 Maths AS KS5 Maths ADV Pure AS KS4 Pure AS KS5 Pure ADV Further AS KS4 Further AS KS5 Further ADV

RB1 2210 2210 RB15 2230 2230 RB1A 2330 2330

Entry code

June 2019 6A19

21/2/19 AS ADV

AS

Pure Core 1 MPC1 33.3 16.7 100

Pure Core 2 MPC2 33.3 16.7 100

Further Pure 1 MFP1 33.3 16.7 100

Mechanics 1 Option B MM1B 33.3 16.7 100

Statistics 1 Option A MS1A/W Written paper MS1A/C Coursework MS1A 33.3 16.7 100

Statistics 1 Option B Written paper MS1B 33.3 16.7 100

Decision 1 MD01 33.3 16.7 100

A2

Pure Core 3 MPC3 - 16.7 100

Pure Core 4 MPC4 - 16.7 100

Further Pure 2 MFP2 - 16.7 100

Further Pure 3 MFP3 - 16.7 100

Further Pure 4 MFP4 - 16.7 100

Mechanics 2 Option B MM2B - 16.7 100

Mechanics 3 MM03 - 16.7 100

Mechanics 4 MM04 - 16.7 100

Mechanics 5 MM05 - 16.7 100

Statistics 2 Option B MS2B - 16.7 100

Statistics 3 MS03 - 16.7 100

Statistics 4 MS04 - 16.7 100

Decision 2 MD02 - 16.7 100

continued on next page

Entry codes 2018/19 - GCE

83

Mathematics (continued) Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Entry code

June 2019 6A19

21/2/19 AS ADV

AS Mathematics subject award MPC1 + MPC2 + one from MS1A, MS1B, MM1A†, MM1B or MD01

5361 - - 300

ADV Mathematics subject award MPC1 + MPC2 + MPC3 + MPC4 + Either MS1A + MM1A† or MS1A + MM1B or MS1A + MD01 or MS1A + MS2A† or MS1A + MS2B or MS1B + MM1A† or MS1B + MM1B or MS1B + MD01 or MS1B + MS2A† or MS1B + MS2B or MM1A† + MD01 or MM1A† + MM2A† or MM1A† + MM2B or MM1B + MD01 or MM1B + MM2A† or MM1B + MM2B or MD01 + MD02

6361 - - 600

AS Pure Mathematics subject award MPC1 + MPC2 + MFP1

5366 - - 300

ADV Pure Mathematics subject award MPC1 + MPC2 + MPC3 + MPC4 + MFP1 + one from MFP2, MFP3, MFP4

6366 - - 600

AS Further Mathematics subject award one from MFP1, MFP2, MFP3, MFP4 + two other units from MFP1, MFP2, MFP3, MFP4, MS1A, MS1B, MS2A†, MS2B, MS03, MS04, MM1A†, MM1B, MM2A†, MM2B, MM03, MM04, MM05, MD01, MD02

• All three units can be at AS standard. • All three units can be in Pure Mathematics. • Only one of MS1A and MS1B , one of MM1A† and MM1B ,

one of MS2A† and MS2B and one of MM2A† and MM2B can be counted towards a subject award.

5371 - - 300

ADV Further Mathematics subject award two from MFP1, MFP2, MFP3, MFP4 + four other units from MFP1, MFP2, MFP3, MFP4, MS1A, MS1B, MS2A†, MS2B, MS03, MS04, MM1A†, MM1B, MM2A†, MM2B, MM03, MM04, MM05, MD01, MD02

• Three or four Pure Mathematics units can be chosen. • At least three of the six units must be at A2 standard. • Only one of MS1A and MS1B , one of MM1A† and MM1B ,

one of MS2A† and MS2B and one of MM2A† and MM2B can be counted towards a subject award.

6371 - - 600

† Candidates must have a result from a previous series. continued on next page

Entry codes 2018/19 - GCE

84

Mathematics (continued)(final re-sit opportunity) GCE

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject awards (5361, 6361, 5366, 6366, 5371, 6371 as appropriate) if certification is required.

Units MM2A (Mechanics 2 option A) and MS2A (Statistics 2 option A) were last offered in June 2008. Unit MM1A (Mechanics 1 option A) was last offered in June 2012.

Candidates re-taking unit MS1A can also carry forward marks from the previous combined GCE Mathematics and GCE Statistics coursework component MS/SS1A/C, last offered in June 2013.

Rules for combinations of awards and unit entries

Full guidance (including examples) is available in the JCQ document GCE Maths Rules - guidance for centres at www.jcq.org.uk/exams-office/entries/gce-maths-information

• Units that contribute to an award in A-level Mathematics may not also be used for an award in Further Mathematics.

o Candidates who are awarded certificates in both A-level Mathematics and A-level Further Mathematics must use unit results from 12 different teaching modules.

o Candidates who are awarded certificates in both A-level Mathematics and AS Further Mathematics must use unit results from 9 different teaching modules.

o Candidates who are awarded certificates in both AS` Mathematics and AS Further Mathematics must use unit results from 6 different teaching modules.

• Where candidates claim a combination of awards, the units will be aggregated to provide the best grade(s) for the combination. For a candidate entered for both Mathematics and Further Mathematics, the best grade for Mathematics will be generated first.

• When units have contributed to an award in a previous series they are tied to that subject title. To release them, candidates need to re-enter the award code for these subjects again. This is particularly important for candidates who have certificated AS or A-level Mathematics in a previous series and now wish to certificate Further Mathematics.

• AS Further Mathematics (5371) cannot be certificated unless AS level Mathematics or A-level Mathematics has been or is being concurrently certificated with AQA or another awarding body.

• A-level Further Mathematics (6371) cannot be certificated unless A-level Mathematics has been or is being concurrently certificated with AQA or another awarding body.

• Combinations of subject awards for this specification are subject to the following conditions.

o Awards in the following pairs of subject titles will not be allowed:

AS Mathematics and AS Pure Mathematics; AS Mathematics and A-level Pure Mathematics; A-level Mathematics and AS Pure Mathematics; A-level Mathematics and A-level Pure Mathematics. AS Pure Mathematics and AS Further Mathematics; AS Pure Mathematics and A-level Further Mathematics; A-level Pure Mathematics and AS Further Mathematics; A-level Pure Mathematics and A-level Further Mathematics.

• Concurrent entries for the following pair of units will not be accepted:

MS1A and MS1B

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

Entry codes 2018/19 - GCE

85

Mathematics (continued)( final re-sit opportunity) GCE

This specification is available to private candidates subject to the conditions above and the following:

Unit MS1A: This unit comprises coursework and a written examination and is available only to private candidates who have already received a result for the unit, in which case the mark for the coursework component must be carried forward and the written component of the unit can be retaken.

Entry codes 2018/19 - GCE

86

Mathematics GCE

Series availability

Weight %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7356 ADV 7357 AS 603/1165/4 ADV 603/1164/2 n/a

Discount codes:

AS KS4 RB1 AS KS5 2210 ADV 2210 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 7356/1

7356 50 80

Paper 2 7356/2 50 80

ADV

Paper 1 7357/1

7357

33⅓ 100

Paper 2 7357/2 33⅓ 100

Paper 3 7357/3 33⅓ 100

A single entry is all that is needed for examination papers and certification. Please see pages 67 for details of our new GCE Further Mathematics specifications.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Further Mathematics new spec GCE

See page 67

Entry codes 2018/19 - GCE

87

Media Studies Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2570 2570 AS 500/2246/5 ADV 500/2245/3 n/a

Discount codes: AS KS4 KA2 AS KS5 5350 ADV 5350 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Investigating Media MEST1 50 25 100

Unit 2 Creating Media Coursework MEST2 50 25 100

A2 Unit 3 Media: Critical Perspectives MEST3 - 25 100

Unit 4 Media: Research and Production Coursework MEST4 - 25 100

AS subject award MEST1 + MEST2 1571 - - 200

ADV subject award MEST1 + MEST2 + MEST3 + MEST4 2571 - - 400

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1571, 2571 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates where:

• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)

or

• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award

Entry codes 2018/19 - GCE

88

Media Studies new spec GCE

Series availability

Weight %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7571 ADV 7572 AS 603/2246/9 ADV 603/2372/3 n/a

Discount codes:

AS KS4 KA2 AS KS5 5350 ADV 5350 Entry

code

June 2019 6A19

21/2/19

AS Written paper 7571/W

7571 70 112

NEA Creating a media product 7571/C 30 60

ADV

Paper 1 7572/1

7572

35 84

Paper 2 7572/2 35 84

NEA Creating a media product 7572/C 30 72

A single entry is all that is needed for examination paper(s), non-exam assessments and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

89

Modern Hebrew outgoing spec GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2675 2675 AS 500/2318/4 ADV 500/2335/4 (AS only) Ebacc,

Discount codes

Other

AS KS4 F1H AS KS5 6030 ADV 6030 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Reading and writing MHEB1 100 50 100

A2 Unit 2 Reading and writing MHEB2 - 50 100

AS subject award MHEB1 1676 - - 100

ADV subject award MHEB1 + MHEB2 2676 - - 200

This specification will be withdrawn after June 2019. A final re-sit opportunity will be available in June 2020.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1676, 2676 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

90

Music GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7271 ADV 7272 AS 601/8305/6 ADV 601/8304/4 n/a

Discount codes:

AS KS4 LF1 AS KS5 7010 ADV 7010 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS

Paper 1 Appraising Music 7271/W

7271

40 96 96

NEA Performance (marked by AQA) 7271/P 30 50 72

NEA Composition (marked by AQA) 7271/C 30 50 72

ADV

Paper 1 Appraising Music 7272/W

7272

40 120 120

NEA Performance (marked by AQA) 7272/P 35 50 105

NEA Composition (marked by AQA) 7272/C 25 50 75

A single entry is all that is needed for the examination paper, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates, providing that:

• the centre is able to supervise and assess the production of non-exam assessment evidence

• any other requirements concerning the administration of non-exam assessments contained within the specification are met.

Entry codes 2018/19 - GCE

91

Panjabi outgoing spec GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s) (AS only):

2680 2680 AS 500/2317/2 ADV 500/2337/8 Ebacc, Other

Discount codes: AS KS4 FKQ AS KS5 6050 ADV 6050 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Reading and writing PANJ1 100 50 100

A2 Unit 2 Reading and writing PANJ2 - 50 100

AS subject award PANJ1 1681 - - 100

ADV subject award PANJ1 + PANJ2 2681 - - 200

This specification will be withdrawn after June 2019. A final re-sit opportunity will be available in June 2020.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1681, 2681 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCE

92

Philosophy Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

2175 2175 AS 601/2680/2 ADV 601/2679/6 n/a

Discount codes: AS KS4 DE1 AS KS5 4790 ADV 4790 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Epistemology and Philosophy of Religion PHLS1 100 50 100

A2 Unit 2 Ethics and Philosophy of Mind PHLS2 - 50 100

AS subject award PHLS1 1176 - - 100

ADV subject award PHLS1 + PHLS2 2176 - - 200

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1176, 2176 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Philosophy new spec GCE

Series availability

Weight %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7171 ADV 7172 AS 603/0685/3 ADV 603/0684/1 n/a

Discount codes:

AS KS4 DE1 AS KS5 4790 ADV 4790 Entry

code

June 2019 6A19

21/2/19

AS Written paper Epistemology and moral philosophy 7171 7171 100 80

ADV Paper 1 Epistemology and moral philosophy 7172/1

7172 50 100

Paper 2 The metaphysics of God and the metaphysics of mind 7172/2 50 100

A single entry is all that is needed for examination paper(s) and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

93

Physical Education GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7581 ADV 7582 AS 601/8631/8 ADV 601/8633/1 n/a

Discount codes:

AS KS4 MA1 AS KS5 7210 ADV 7210 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS Paper Factors affecting participation in physical

activity and sport 7581/W 7581

70 84 210

NEA Practical performance in physical activity and sport 7581/C 30 90 90

ADV

Paper 1 Factors affecting participation in physical activity and sport 7582/1

7582

35 105 105

Paper 2 Factors affecting optimal performance in physical activity and sport 7582/2 35 105 105

NEA Practical performance in physical activity and sport 7582/C 30 90 90

A single entry is all that is needed for the examination paper(s), non-exam assessment and certification.

Moderator visits (1 March – 31 May) are arranged based on Estimated Entries. You must submit estimates to receive a visit.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are not available to private candidates.

Entry codes 2018/19 - GCE

94

Physics GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers:

AS 7407 ADV 7408 AS 601/4746/5 ADV 601/4747/7

Discount codes: Attainment 8

(AS only):

AS KS4 RC1 AS KS5 1210 ADV 1210 measures EBacc, Other

Entry code

June 2019 6A19

21/2/19

AS Paper 1 7407/1

7407 50 70

Paper 2 7407/2 50 70

ADV

A - Astrophysics

Paper 1 7408/1

7408A

34 85

Paper 2 7408/2 34 85

Paper 3 section A section B option A

7408/3A 7408/3BA 32 45

35

Practical skills endorsement 7408/C - -

B- Medical physics

Paper 1 7408/1

7408B

34 85

Paper 2 7408/2 34 85

Paper 3 section A section B option B

7408/3A 7408/3BB 32 45

35

Practical skills endorsement 7408/C - -

C - Engineering physics

Paper 1 7408/1

7408C

34 85

Paper 2 7408/2 34 85

Paper 3 section A section B option C

7408/3A 7408/3BC 32 45

35

Practical skills endorsement 7408/C - -

D - Turning points in physics

Paper 1 7408/1

7408D

34 85

Paper 2 7408/2 34 85

Paper 3 section A section B option D

7408/3A 7408/3BD 32 45

35

Practical skills endorsement 7408/C - -

E - Electronics

Paper 1 7408/1

7408E

34 85

Paper 2 7408/2 34 85

Paper 3 section A section B option E

7408/3A 7408/3BE 32 45

35

Practical skills endorsement 7408/C - -

Continued on next page

Entry codes 2018/19 - GCE

95

Physics (continued) GCE

These specifications are not available to centres in Northern Ireland. For more information, see the Changes to exams section on page 7.

A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification. Candidates taking the A-level qualification will only be allowed to enter one of the five options per series.

If a candidate wishes to re-take the qualification, they may carry forward the endorsement provided the candidate has previously certified the same qualification. If a candidate has more than one previous attempt, the attempt that was used in the most recent award (including grades of ‘Not Classified’) will be carried forward. The endorsement may be carried forward across awarding bodies.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

The AS specification is available to private candidates. It is expected that students undertaking the AS will carry out at least the six required practical activities in section 7.2 of the specification, and private candidates should make arrangements to complete sufficient practical work to fulfil this expectation. 15% of the marks in the AS papers will relate to practical work.

The Advanced specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8.2 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Entry codes 2018/19 - GCE

96

Polish outgoing spec GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s) (AS only):

2685 2685 AS 500/2316/0 ADV 500/2338/X EBacc, Other

Discount codes: AS KS4 FKO AS KS5 6070 ADV 6070 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS Unit 1 Reading and writing PLSH1 100 50 100

A2 Unit 2 Reading and writing PLSH2 - 50 100

AS subject award PLSH1 1686 - - 100

ADV subject award PLSH1 + PLSH2 2686 - - 200

This specification will be withdrawn after June 2019. A final re-sit opportunity will be available in June 2020.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1686, 2686 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Politics new spec GCE

Series availability

Weight %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7151 ADV 7152 AS 603/1402/3 ADV 603/1403/5 n/a

Discount codes:

AS KS4 EA AS KS5 4830 ADV 4830 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 Government and politics of the UK 7151 7151 100 98

ADV

Paper 1 Government and politics of the UK 7152/1

7152

33⅓

77

Paper 2 Government and politics of the USA and comparative politics

7152/2

33⅓

77

Paper 3 Political ideas 7152/3 33⅓

77

A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

97

Psychology GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7181 ADV 7182 AS 601/4837/8 ADV 601/4838/X n/a

Discount codes:

AS KS4 PK1 AS KS5 4850 ADV 4850 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 Introductory Topics in Psychology 7181/1

7181 50 72

Paper 2 Psychology in Context 7181/2 50 72

ADV

Paper 1 Introductory Topics in Psychology 7182/1

7182

33.3 96

Paper 2 Psychology in Context 7182/2 33.3 96

Paper 3 Issues and Options in Psychology 7182/3 33.3 96

A single entry is all that is needed for both examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

98

Religious Studies GCE

Series availability

Weight %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s):

AS 7061 ADV 7062 AS 601/8716/5 ADV 601/8830/3 n/a

Discount codes:

AS KS4 DD1 AS KS5 4610 ADV 4610 Entry

code

June 2019 6A19

21/2/19

AS

A Buddhism Paper 1 Philosophy of religion and

ethics 7061/1 7061A

66.7 120

Paper 2A Buddhism 7061/2A 33.3 60

B Christianity Paper 1 Philosophy of religion and

ethics 7061/1 7061B

66.7 120

Paper 2B Christianity 7061/2B 33.3 60

C Hinduism Paper 1 Philosophy of religion and

ethics 7061/1 7061C

66.7 120

Paper 2C Hinduism 7061/2C 33.3 60

D Islam Paper 1 Philosophy of religion and

ethics 7061/1 7061D

66.7 120

Paper 2D Islam 7061/2D 33.3 60

E Judaism Paper 1 Philosophy of religion and

ethics 7061/1 7061E

66.7 120

Paper 2E Judaism 7061/2E 33.3 60

ADV

A Buddhism Paper 1 Philosophy of religion and

ethics 7062/1 7062A

50 100

Paper 2A Buddhism and dialogues 7062/2A 50 100

B Christianity Paper 1 Philosophy of religion and

ethics 7062/1 7062B

50 100

Paper 2B Christianity and dialogues 7062/2B 50 100

C Hinduism Paper 1 Philosophy of religion and

ethics 7062/1 7062C

50 100

Paper 2C Hinduism and dialogues 7062/2C 50 100

D Islam Paper 1 Philosophy of religion and

ethics 7062/1 7062D

50 100

Paper 2D Islam and dialogues 7062/2D 50 100

E Judaism Paper 1 Philosophy of religion and

ethics 7062/1 7062E

50 100

Paper 2E Judaism and dialogues 7062/2E 50 100

continued on next page

Entry codes 2018/19 - GCE

99

Religious Studies (continued) GCE

Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

100

Sociology GCE

Series availability

Weighting %

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s)

AS 7191 ADV 7192 AS 601/3995/X ADV 601/3994/8 n/a

Discount codes:

AS KS4 EE2 AS KS5 4890 ADV 4890 Entry

code

June 2019 6A19

21/2/19

AS Paper 1 Education with Methods in Context 7191/1

7191 50 60

Paper 2 Research Methods and Topics in Sociology 7191/2 50 60

ADV

Paper 1 Education with Theory and Methods 7192/1

7192

33.3 80

Paper 2 Topics in Sociology 7192/2 33.3 80

Paper 3 Crime and Deviance with Theory and Methods 7192/3 33.3 80

A single entry is all that is needed for both examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates.

Entry codes 2018/19 - GCE

101

Spanish GCE

Series availability

Weight %

Max mark

Max mark

Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):

AS 7691 ADV 7692 AS 601/8730/X ADV 601/8732/3 Ebacc, Other

Discount codes:

AS KS4 FKS AS KS5 5750 ADV 5750 Entry

code

June 2019 6A19

21/2/19

raw scaled

AS

T

Paper 1 Listening, reading and writing 7691/1

7691T

45 90 90

Paper 2 Writing 7691/2 25 50 50

NEA Teacher conducted speaking test (Marked by AQA) 7691/3T 30 60 60

V

Paper 1 Listening, reading and writing 7691/1

7691V

45 90 90

Paper 2 Writing 7691/2 25 50 50

NEA Visiting examiner conducted speaking test (Marked by AQA) 7691/3V 30 60 60

ADV

T

Paper 1 Listening, reading and writing 7692/1

7692T

50 100 200

Paper 2 Writing 7692/2 20 80 80

NEA Teacher conducted speaking test (Marked by AQA) 7692/3T 30 60 120

V

Paper 1 Listening, reading and writing 7692/1

7692V

50 100 200

Paper 2 Writing 7692/2 20 80 80

NEA Visiting examiner conducted speaking test (Marked by AQA) 7692/3V 30 60 120

Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

Speaking tests:

• Teacher conducted options Centres must submit candidates’ speaking tests on CD or memory stick.

• Visiting examiner options Centres who request a visiting examiner must meet the requirement for a minimum of ten candidates.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

These specifications are available to private candidates provided they attend an AQA approved centre willing to make arrangements for conducting the speaking tests. For the A-level specification, that centre must also be prepared to supervise and authenticate the individual research project.

Entry codes 2018/19 - GCE

102

Statistics Final re-sit opportunity GCE

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)

6380 6380 AS 100/3491/2 ADV 100/3490/0 n/a

Discount codes: AS KS4 RB71 AS KS5 2260 ADV 2260 Entry

code

June 2019 6A19

21/2/19 AS ADV

AS

Unit 1 Option A: Statistics 1A SS1A/W Written paper

SS1A/C Coursework SS1A 33.3 16.7 100

Option B: Statistics 1B SS1B 33.3 16.7 100

Unit 2 Statistics 2 SS02 33.3 16.7 100

Unit 3 Statistics 3 SS03 33.3 16.7 100

A2

Unit 4 Statistics 4 SS04 - 16.7 100

Unit 5 Statistics 5 SS05 - 16.7 100

Unit 6 Statistics 6 SS06 - 16.7 100

AS subject award SS1A or SS1B + SS02 + SS03 5381 - - 300

ADV subject award SS1A or SS1B + SS02 + SS03 + SS04 + SS05 + SS06

6381 - - 600

This specification is available as a final re-sit only opportunity.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (5381, 6381 as appropriate) if certification is required.

Candidates re-taking unit SS1A can also carry forward marks from the previous combined GCE Mathematics and GCE Statistics coursework component MS/SS1A/C, last offered in June 2013.

Concurrent entries for SS1A and SS1B will not be accepted.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates subject to the following condition:

Unit SS1A: This unit comprises coursework and a written examination and is available only to private candidates who have already received a result for the unit, in which case the mark for the coursework component must be carried forward and the written component of the unit can be retaken.

Entry codes 2018/19 - GCE Use of Mathematics (Pilot)

103

Use of Mathematics (Pilot) Final re-sit opportunity GCE (FSM)

Series availability

Weighting %

Max UMS

Specification codes: Data Analysis Hypothesis Testing Dynamics Principles for Finance Decision Maths Calculus USE & Award Basedata group codes: Data Analysis Hypothesis Testing Dynamics Principles for Finance Decision Maths Calculus USE & Award Qualification numbers: Data Analysis Hypothesis Testing Dynamics Personal Finance Decision Maths Calculus AS ADV Attainment 8 measure(s)

9993 9994 9995 9996 9997 9998 9360 9993 9994 9995 9996 9997 9998 9360 100/6449/7 500/4006/6 500/4090/X 500/4092/3 500/4007/8 500/4008/X 500/4094/7 500/4146/0 n/a

Discount codes: Data Analysis KS4 Data Analysis KS5 Hypothesis Test KS4 Hypothesis Test KS5 Dynamics KS4 Dynamics KS5 Personal Finance KS4 Personal Finance KS5 Decision Maths KS4 Decision Maths KS5 Calculus KS4 Calculus KS5 AS KS4 AS KS5 ADV

RB7F 2421 RB7I 2491 RB56 2441 RB7B 2381 RB6A 2490 RB55 2440 RB7H 2200 2200

Entry code

June 2019 6A19

21/2/19

AS A2

AS

Unit 1 USE1 Algebra USE1 33⅓ 16⅔ 100

Unit 2 and Unit 3

(Two of five FSMQ units)

FSMQ Data Analysis 9993 33⅓ 16⅔ 100

FSMQ Hypothesis Testing 9994 33⅓ 16⅔ 100

FSMQ Dynamics 9995 33⅓ 16⅔ 100

FSMQ Mathematical Principles for Personal Finance 9996 33⅓ 16⅔ 100

FSMQ Decision Mathematics 9997 33⅓ 16⅔ 100

A2

Unit 4 FSMQ Calculus 9998 - 16⅔ 100

Unit 5 USE2 Mathematical Applications Portfolio USE2 - 16⅔ 100

Unit 6 USE3 Mathematical Comprehension USE3 - 16⅔ 100

AS subject award USE1 + two from 9993, 9994, 9995, 9996, 9997 9361 - 300

ADV subject award USE1 + two from 9993, 9994, 9995, 9996, 9997 + 9998 + USE2 + USE3

9362 - 600

continued on next page

Entry codes 2018/19 - GCE Use of Mathematics (Pilot)

104

Use of Mathematics (Pilot)(continued)(final re-sit opportunity) GCE

This specification is available as a final re-sit only opportunity.

The e-AQA qualification code for units 2, 3 and 4 (the FSMQ units) is FSM. The qualification code for units 1, 5 and 6, and the AS and Advanced subject awards is GCE.

This is a pilot specification and, as such, centres will be invited to take part with the maximum number of candidates and centres participating being determined by the regulator.

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (9361, 9362 as appropriate) if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates only at centres approved for the pilot.

Private candidates wishing to submit coursework for assessment must make arrangements for their work to be authenticated. Details of their authentication arrangements must be submitted to us using a Private candidate coursework information form at the time their entry request is made. Please see our website aqa.org.uk/private for further details.

Entry codes 2018/19 - GCSE

105

Art and Design (Art, craft and design) GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8201 601/8088/2 Other

Discount code:

JA2

Entry code

June 2019 6G19

21/2/19

Component 1 Portfolio 8201/C 8201

60 96

Component 2 Externally set assignment 8201/X 40 96

A single entry is all that is needed for non-exam assessments and certification.

Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates. Art and Design (Fine art) GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8202 601/8088/2 Other

Discount code:

JA2

Entry code

June 2019 6G19

21/2/19

Component 1 Portfolio 8202/C 8202

60 96

Component 2 Externally set assignment 8202/X 40 96

A single entry is all that is needed for non-exam assessments and certification.

Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCSE

106

Art and Design (Graphic communication) GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8203 601/8088/2 Other

Discount code:

JA2

Entry code

June 2019 6G19

21/2/19

Component 1 Portfolio 8203/C 8203

60 96

Component 2 Externally set assignment 8203/X 40 96

A single entry is all that is needed for non-exam assessments and certification.

Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates. Art and Design (Textile design) GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8204 601/8088/2 Other

Discount code:

JA2

Entry code

June 2019 6G19

21/2/19

Component 1 Portfolio 8204/C 8204

60 96

Component 2 Externally set assignment 8204/X 40 96

A single entry is all that is needed for non-exam assessments and certification.

Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCSE

107

Art and Design (Three-dimensional design) GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8205 601/8088/2 Other

Discount code:

JA2

Entry code

June 2019 6G19

21/2/19

Component 1 Portfolio 8205/C 8205

60 96

Component 2 Externally set assignment 8205/X 40 96

A single entry is all that is needed for non-exam assessments and certification.

Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates. Art and Design (Photography) GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8206 601/8088/2 Other

Discount code:

KJ1

Entry code

June 2019 6G19

21/2/19

Component 1 Portfolio 8206/C 8206

60 96

Component 2 Externally set assignment 8206/X 40 96

A single entry is all that is needed for non-exam assessments and certification.

Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCSE

108

Bengali new spec GCSE (GCSE91)

Series availability

Weight %

Max mark

raw

Max mark

Scaled Specification code: Qualification number: Attainment 8 measure(s)

8638 603/1130/7 EBacc, Other

Discount code:

FKB Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8638/LF

8638F

25 40 60

NEA Paper 2 Speaking test 8638/SF 25 60 60

Written Paper 3 Reading test 8638/RF 25 60 60

Written Paper 4 Writing test 8638/WF 25 50 60

Hig

her T

ier

Written Paper 1 Listening test 8638/LH

8638H

25 50 60

NEA Paper 2 Speaking test 8638/SH 25 60 60

Written Paper 3 Reading test 8638/RH 25 60 60

Written Paper 4 Writing test 8638/WH 25 60 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

109

Biology GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8461 601/8752/9 EBacc, Other

Discount code:

RH3 Entry

code

June 2019 6G19

21/2/19

Foundation Tier

Paper 1 Tier F 8461/1F 8461F

50 100

Paper 2 Tier F 8461/2F 50 100

Higher Tier

Paper 1 Tier H 8461/1H 8461H

50 100

Paper 2 Tier H 8461/2H 50 100

June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.

Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.

The following combinations of entries are not permitted in the same series:

• GCSE Biology with GCSE Combined Science: Synergy

• GCSE Biology with GCSE Combined Science: Trilogy

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Business new spec GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8132 603/0304/9 Other

Discount code:

AA3

Entry code

June 2019 6G19

21/2/19

Paper 1 Influences of operations and HRM on business activity 8132/1

8132 50 90

Paper 2 Influences of marketing and finance on business activity 8132/2 50 90

A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

110

Chemistry GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8462 601/8757/8 EBacc, Other

Discount code:

RD1 Entry

code

June 2019 6G19

21/2/19

Foundation Tier

Paper 1 Tier F 8462/1F 8462F

50 100

Paper 2 Tier F 8462/2F 50 100

Higher Tier

Paper 1 Tier H 8462/1H 8462H

50 100

Paper 2 Tier H 8462/2H 50 100

June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.

Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.

The following combinations of entries are not permitted in the same series:

• GCSE Chemistry with GCSE Combined Science: Synergy

• GCSE Chemistry with GCSE Combined Science: Trilogy

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Entry codes 2018/19 - GCSE

111

Chinese (Spoken Mandarin) new spec GCSE (GCSE91)

Series availability

Weight %

Max mark

raw

Max mark

Scaled Specification code: Qualification number: Attainment 8 measure(s)

8673 603/1210/5 EBacc, Other

Discount code:

FKC Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8673/LF

8673F

25 40 60

NEA Paper 2 Speaking test 8673/SF 25 60 60

Written Paper 3 Reading test 8673/RF 25 60 60

Written Paper 4 Writing test 8673/WF 25 50 60

Hig

her T

ier

Written Paper 1 Listening test 8673/LH

8673H

25 50 60

NEA Paper 2 Speaking test 8673/SH 25 60 60

Written Paper 3 Reading test 8673/RH 25 60 60

Written Paper 4 Writing test 8673/WH 25 60 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Citizenship Studies GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8100 601/8595/8 Other

Discount code:

EE31

Entry code

June 2019 6G19

21/2/19

Paper 1 8100/1 8100

50 80

Paper 2 8100/2 50 80

A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates. Centres accepting private candidates must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Entry codes 2018/19 - GCSE

112

Combined Science: Synergy (Double Award) GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8465 601/8760/8 EBacc, Other

Discount code:

RA1E Entry

code

June 2019 6G19

21/2/19

Foundation Tier

Paper 1 Tier F 8465/1F

8465F

25 100

Paper 2 Tier F 8465/2F 25 100

Paper 3 Tier F 8465/3F 25 100

Paper 4 Tier F 8465/4F 25 100

Higher Tier

Paper 1 Tier H 8465/1H

8465H

25 100

Paper 2 Tier H 8465/2H 25 100

Paper 3 Tier H 8465/3H 25 100

Paper 4 Tier H 8465/4H 25 100

June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.

Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.

The following combinations of entries are not permitted in the same series:

• GCSE Combined Science: Synergy with GCSE Combined Science: Trilogy

• GCSE Combined Science: Synergy with GCSE Biology

• GCSE Combined Science: Synergy with GCSE Chemistry

• GCSE Combined Science: Synergy with GCSE Physics

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 10 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Entry codes 2018/19 - GCSE

113

Combined Science: Trilogy (Double Award) GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8464 601/8758/X EBacc, Other

Discount code:

RA1E Entry

code

June 2019 6G19

21/2/19

Foundation Tier

Paper 1: Biology 1 Tier F 8464/B/1F

8464F

16⅔ 70

Paper 2: Biology 2 Tier F 8464/B/2F 16⅔ 70

Paper 3: Chemistry 1 Tier F 8464/C/1F 16⅔ 70

Paper 4: Chemistry 2 Tier F 8464/C/2F 16⅔ 70

Paper 5: Physics 1 Tier F 8464/P/1F 16⅔ 70

Paper 6: Physics 2 Tier F 8464/P/2F 16⅔ 70

Higher Tier

Paper 1: Biology 1 Tier H 8464/B/1H

8464H

16⅔ 70

Paper 2: Biology 2 Tier H 8464/B/2H 16⅔ 70

Paper 3: Chemistry 1 Tier H 8464/C/1H 16⅔ 70

Paper 4: Chemistry 2 Tier H 8464/C/2H 16⅔ 70

Paper 5: Physics 1 Tier H 8464/P/1H 16⅔ 70

Paper 6: Physics 2 Tier H 8464/P/2H 16⅔ 70

June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.

Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.

The following combinations of entries are not permitted in the same series:

• GCSE Combined Science: Trilogy with GCSE Combined Science: Synergy

• GCSE Combined Science: Trilogy with GCSE Biology

• GCSE Combined Science: Trilogy with GCSE Chemistry

• GCSE Combined Science: Trilogy with GCSE Physics

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 10 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Entry codes 2018/19 - GCSE

114

Computer Science GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8520 601/8301/9 EBacc, Other

Discount code:

CK1 Entry

code

June 2019 6G19

21/2/19

Paper 1 Computational thinking and problem solving 8520/1 8520

50 80

Paper 2 Written assessment 8520/2 50 80

A single entry is all that is needed for examination papers and certification.

In addition to the two written exams, students are required to undertake a Programming Project to demonstrate programming skills and understanding of programming. However the Programming Project will not contribute towards the students’ overall 9-1 GCSE grade. Schools are required to submit a Programming Project declaration and a sample of students work for verification by 15 May.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCSE

115

Dance GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8236 601/8549/1 Other

Discount code:

LB1

Entry code

June 2019 6G19

21/2/19

NEA Component 1: Performance and choreography 8236/C 8236

60 80

Written Component 2: Dance appreciation 8236/W 40 80

A single entry is all that is needed for examination paper, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates, under condition that:

• candidates attend an AQA school or college which will supervise and assess the production of non-exam assessment evidence

• any other requirements concerning the administration of non-exam assessments contained within this specification are met.

Design and Technology new spec GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8552 603/0984/2 Other

Discount code:

VF1

Entry code

June 2019 6G19

21/2/19

Written Paper 8552/W 8552

50 100

NEA 8552/C 50 100

A single entry is all that is needed for examination paper, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCSE

116

Drama GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8261 601/8575/2 Other

Discount code:

LC11

Entry code

June 2019 6G19

21/2/19

Written Component 1: Understanding drama 8261/W

8261

40 80

NEA Component 2: Devising drama (practical) 8261/C 40 80

Externally-assessed practical Component 3: Texts in practice 8261/X 20 40

A single entry is all that is needed for examination paper, non-exam assessment, externally-assessed practical and certification.

Examiner visits (20 November – 31 May) are arranged based on Estimated Entries. You must submit estimates to receive a visit.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Economics new spec GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8136 603/0126/0 Other

Discount code:

EB

Entry code

June 2019 6G19

21/2/19

Paper 1 How markets work 8136/1 8136

50 80

Paper 2 How the economy works 8136/2 50 80

A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

117

Engineering new spec GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8852 603/0719/5 Other

Discount code:

XA1

Entry code

June 2019 6G19

21/2/19

Written paper 8852/W 8852

60 120

NEA Practical engineering 8852/C 40 80

A single entry is all that is needed for examination paper, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCSE

118

English Language GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8700 601/4292/3 EBacc, Other

Discount code:

FK2B

Entry code

Nov 2018 BG18

4/10/18

June 2019 6G19

21/2/19

Paper 1 Explorations in Creative Reading and Writing 8700/1

8700

50 80

Paper 2 Writers’ Viewpoints and Perspectives 8700/2 50 80

NEA Spoken language (endorsement) 8700/C - -

This specification is not available to centres in Northern Ireland. For more information, see the Changes to exams section on page 7

A single entry is all that is needed for examination papers, non-exam assessment and certification.

If a candidate wishes to re-take the qualification, they may carry forward the endorsement provided the candidate has previously certified the same qualification. If a candidate has more than one previous attempt, the attempt that was used in the most recent award (including grades of ‘Not Classified’) will be carried forward. The endorsement may be carried forward across awarding bodies.

Centres must submit a non-exam assessment and fieldwork centre declaration form.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates where:

• because of the nature of the non-exam assessment (NEA), candidates are attending an AQA centre that must supervise, authenticate and assess the NEA

or

• if the candidate has certificated in a previous series, then the result for the NEA can be carried forward.

Entries for the November series will only be available to candidates who were at least 16 years old on 31 August in the same calendar year, as set out in Ofqual's GCSE subject level conditions and requirements for English Language.

Entry codes 2018/19 - GCSE

119

English Literature GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8702 601/4447/6 EBacc, Other

Discount code:

FC4

Entry code

June 2019 6G19

21/2/19

Paper 1 Shakespeare and the 19th-century Novel 8702/1 8702

40 64

Paper 2 Modern texts and poetry 8702/2 60 96

A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates. Food Preparation and Nutrition GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8585 601/8421/8 Other

Discount code:

NH6

Entry code

June 2019 6G19

21/2/19

Written Paper 1 8585/W 8585

50 100

NEA 8585/C 50 100

A single entry is all that is needed for examination paper, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCSE

120

French GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8658 601/8157/6 EBacc, Other

Discount code:

FKF Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8658/LF

8658F

25 40

NEA Paper 2 Speaking test 8658/SF 25 60

Written Paper 3 Reading test 8658/RF 25 60

Written Paper 4 Writing test 8658/WF 25 50

Hig

her T

ier

Written Paper 1 Listening test 8658/LH

8658H

25 50

NEA Paper 2 Speaking test 8658/SH 25 60

Written Paper 3 Reading test 8658/RH 25 60

Written Paper 4 Writing test 8658/WH 25 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Geography GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8035 601/8410/3 EBacc, Other

Discount code:

RF4

Entry code

June 2019 6G19

21/2/19

Paper 1 Living with the physical environment 8035/1

8035

35 88

Paper 2 Challenges in the human environment 8035/2 35 88

Paper 3 Geographical applications 8035/3 30 76

A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates. Centres accepting private candidates must submit a non-exam assessment, fieldwork and live performance centre declaration form. The declaration may be completed following either the presentation of evidence by the candidate and questioning about the fieldwork enquiry, or by a teacher from the centre supervising the candidate's fieldwork activity. Fieldwork must take place outside school grounds on two separate occasions.

Entry codes 2018/19 - GCSE

121

German GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8668 601/8159/X EBacc, Other

Discount code:

FKG Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8668/LF

8668F

25 40

NEA Paper 2 Speaking test 8668/SF 25 60

Written Paper 3 Reading test 8668/RF 25 60

Written Paper 4 Writing test 8668/WF 25 50

Hig

her T

ier

Written Paper 1 Listening test 8668/LH

8668H

25 50

NEA Paper 2 Speaking test 8668/SH 25 60

Written Paper 3 Reading test 8668/RH 25 60

Written Paper 4 Writing test 8668/WH 25 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

122

History GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8145 601/8217/9 EBacc, Other

Discount code:

DB

Entry code

June 2019 6G19

21/2/19

Paper 1 1A Period Studies

See notes below

50 40

1B Wider World depth studies 44

Paper 2 2A Thematic Studies

50 44

2B British Depth Studies 40

Candidates may only enter for one of the entry options per series. A single entry is all that is needed for examination papers and certification.

Entry codes

These are generated as follows: • the first four characters are the specification code 8145 • the fifth character is the letter indicating a particular pair of paper 1 sections (A and B) • the sixth character is the letter indicating a particular pair of paper 2 sections (A and B)

The table below shows the entry code letter (fifth character) for each valid pair of Paper 1 sections.

Paper 1 – Period Studies and Wider World depth studies

Letter Section A Code Section A (Period Studies) title Section B

code Section B (Wider World depth

studies) title

A 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/A Conflict and tension – First

World War, 1894–1918

B 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/B Conflict and tension – the

inter-war years, 1918–1939

C 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/C Conflict and tension between

East and West, 1945–1972

D 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/D Conflict and tension in Asia,

1950–1975

E 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/E Conflict and tension in the Gulf

and Afghanistan, 1990–2009

F 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/A Conflict and tension - First

World War, 1894–1918

G 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/B Conflict and tension - the inter-

war years, 1918–1939

H 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/C Conflict and tension between

East and West, 1945–1972

J 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/D Conflict and tension in Asia,

1950–1975

K 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/E Conflict and tension in the Gulf

and Afghanistan, 1990–2009

L 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/A Conflict and tension - First

World War, 1894–1918

M 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/B Conflict and tension - the inter-

war years, 1918–1939

N 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/C Conflict and tension between

East and West, 1945–1972

O 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/D Conflict and tension in Asia,

1950–1975

P 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/E Conflict and tension in the Gulf

and Afghanistan, 1990–2009 continued on next page

Entry codes 2018/19 - GCSE

123

History (continued) GCSE (GCSE91)

Paper 1 – Period Studies and Wider World depth studies (continued)

Letter Section A Code Section A title Section B

code Section B title

Q 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/A Conflict and tension - First

World War, 1894–1918

R 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/B Conflict and tension - the inter-

war years, 1918–1939

S 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/C Conflict and tension between

East and West, 1945–1972

T 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/D Conflict and tension in Asia,

1950–1975

U 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/E Conflict and tension in the Gulf

and Afghanistan, 1990–2009

The table below shows the entry code letter (sixth character) for each valid pair of Paper 2 sections.

Paper 2 – Thematic Studies and British depth studies

Letter Section A Code Section A (Thematic Studies) title Section B

code Section B (British depth

studies) title

A 8145/2A/A Britain: Health and the people: c1000 to the present day 8145/2B/A

Norman England, c1066–c1100

B 8145/2A/A Britain: Health and the people: c1000 to the present day 8145/2B/B

Medieval England: the reign of Edward I, 1272–1307

C 8145/2A/A Britain: Health and the people: c1000 to the present day 8145/2B/C

Elizabethan England, c1568–1603

D 8145/2A/A Britain: Health and the people: c1000 to the present day 8145/2B/D

Restoration England, 1660–1685

E 8145/2A/B Britain: Power and the people: c1170 to the present day 8145/2B/A

Norman England, c1066–c1100

F 8145/2A/B Britain: Power and the people: c1170 to the present day 8145/2B/B

Medieval England: the reign of Edward I, 1272–1307

G 8145/2A/B Britain: Power and the people: c1170 to the present day 8145/2B/C

Elizabethan England, c1568–1603

H 8145/2A/B Britain: Power and the people: c1170 to the present day 8145/2B/D

Restoration England, 1660–1685

J 8145/2A/C Britain: Migration, empires and the people: c790 to the present day 8145/2B/A

Norman England, c1066–c1100

K 8145/2A/C Britain: Migration, empires and the people: c790 to the present day 8145/2B/B

Medieval England: the reign of Edward I, 1272–1307

L 8145/2A/C Britain: Migration, empires and the people: c790 to the present day 8145/2B/C

Elizabethan England, c1568–1603

M 8145/2A/C Britain: Migration, empires and the people: c790 to the present day 8145/2B/D

Restoration England, 1660–1685

A tool to confirm the entry code for a particular set of papers and sections can be found at www.aqa.org.uk/gcsehistorycodes

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

124

Italian new spec GCSE (GCSE91)

Series availability

Weight %

Max mark

raw

Max mark

Scaled Specification code: Qualification number: Attainment 8 measure(s)

8633 603/0985/4 EBacc, Other

Discount code:

FKX Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8633/LF

8633F

25 40 60

NEA Paper 2 Speaking test 8633/SF 25 60 60

Written Paper 3 Reading test 8633/RF 25 60 60

Written Paper 4 Writing test 8633/WF 25 50 60

Hig

her T

ier

Written Paper 1 Listening test 8633/LH

8633H

25 50 60

NEA Paper 2 Speaking test 8633/SH 25 60 60

Written Paper 3 Reading test 8633/RH 25 60 60

Written Paper 4 Writing test 8633/WH 25 60 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

125

Mathematics GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8300 601/4608/4 Maths, Other

Discount code:

RB1 Entry

code

Nov 2018 BG18

4/10/18

June 2019 6G19

21/2/19

Foundation tier

Paper 1 Tier F (Non-calculator) 8300/1F

8300F

33.3 80

Paper 2 Tier F (Calculator) 8300/2F 33.3 80

Paper 3 Tier F (Calculator) 8300/3F 33.3 80

Higher tier

Paper 1 Tier H (Non-calculator) 8300/1H

8300H

33.3 80

Paper 2 Tier H (Calculator) 8300/2H 33.3 80

Paper 3 Tier H (Calculator) 8300/3H 33.3 80

Candidates may enter for only one of the two tiers per series. A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entries for the November series will only be available to candidates who were at least 16 years old on 31 August in the same calendar year, as set out in Ofqual's GCSE subject level conditions and requirements for Mathematics.

Media Studies new spec GCSE (GCSE91) Series

availability Weight

%

Max mark

raw

Max mark

scaled

Specification code: Qualification number: Attainment 8 measure(s)

8572 603/2105/2 Other

Discount code:

KA2 Entry code

June 2019 6G19

21/2/19

Paper 1 Media One 8572/1

8572

35 84 84

Paper 2 Media Two 8572/2 35 84 84

NEA Creating a media product 8572/C 30 60 72

A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCSE

126

Modern Hebrew new spec GCSE (GCSE91)

Series availability

Weight %

Max mark

raw

Max mark

scaled Specification code: Qualification number: Attainment 8 measure(s)

8678 603/1183/6 EBacc, Other

Discount code:

F1H Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8678/LF

8678F

25 40 60

NEA Paper 2 Speaking test 8678/SF 25 60 60

Written Paper 3 Reading test 8678/RF 25 60 60

Written Paper 4 Writing test 8678/WF 25 50 60

Hig

her T

ier

Written Paper 1 Listening test 8678/LH

8678H

25 50 60

NEA Paper 2 Speaking test 8678/SH 25 60 60

Written Paper 3 Reading test 8678/RH 25 60 60

Written Paper 4 Writing test 8678/WH 25 60 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Music GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8271 601/8361/5 Other

Discount code:

LF1

Entry code

June 2019 6G19

21/2/19

Written Component 1: Understanding music 8271/W

8271

40 96

NEA Component 2: Performing music 8271/P 30 72

NEA Component 3: Composing music 8271/C 30 72

A single entry is all that is needed for examination paper, non-exam assessments and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessments.

Entry codes 2018/19 - GCSE

127

Panjabi new spec GCSE (GCSE91)

Series availability

Weight %

Max mark

raw

Max mark

scaled Specification code: Qualification number: Attainment 8 measure(s)

8683 603/1074/1 EBacc, Other

Discount code:

FKQ Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8683/LF

8683F

25 40 60

NEA Paper 2 Speaking test 8683/SF 25 60 60

Written Paper 3 Reading test 8683/RF 25 60 60

Written Paper 4 Writing test 8683/WF 25 50 60

Hig

her T

ier

Written Paper 1 Listening test 8683/LH

8683H

25 50 60

NEA Paper 2 Speaking test 8683/SH 25 60 60

Written Paper 3 Reading test 8683/RH 25 60 60

Written Paper 4 Writing test 8683/WH 25 60 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Physical Education GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8582 601/8279/9 Other

Discount code:

MA1

Entry code

June 2019 6G19

21/2/19

Paper 1 The human body and movement in physical activity and sport 8582/1

8582

30 78

Paper 2 Socio-cultural influences and well-being in physical activity and sport 8582/2 30 78

NEA Practical performance in physical activity and sport 8582/C 40 100

A single entry is all that is needed for examination papers, non-exam assessment and certification.

Examiner visits (1 March – 31 May) are arranged based on Estimated Entries. You must submit estimates to receive a visit.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - GCSE

128

Physics GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8463 601/8751/7 EBacc, Other

Discount code:

RC1 Entry

code

June 2019 6G19

21/2/19

Foundation Tier

Paper 1 Tier F 8463/1F 8463F

50 100

Paper 2 Tier F 8463/2F 50 100

Higher Tier

Paper 1 Tier H 8463/1H 8463H

50 100

Paper 2 Tier H 8463/2H 50 100

June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.

Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.

The following combinations of entries are not permitted in the same series:

• GCSE Physics with GCSE Combined Science: Synergy

• GCSE Physics with GCSE Combined Science: Trilogy

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.

Entry codes 2018/19 - GCSE

129

Polish new spec GCSE (GCSE91)

Series availability

Weight %

Max mark

raw

Max mark

scaled Specification code: Qualification number: Attainment 8 measure(s)

8688 603/1185/X EBacc, Other

Discount code:

FKO Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8688/LF

8688F

25 40 60

NEA Paper 2 Speaking test 8688/SF 25 60 60

Written Paper 3 Reading test 8688/RF 25 60 60

Written Paper 4 Writing test 8688/WF 25 50 60

Hig

her T

ier

Written Paper 1 Listening test 8688/LH

8688H

25 50 60

NEA Paper 2 Speaking test 8688/SH 25 60 60

Written Paper 3 Reading test 8688/RH 25 60 60

Written Paper 4 Writing test 8688/WH 25 60 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Psychology new spec GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8182 603/0932/5 Other

Discount code:

PK1

Entry code

June 2019 6G19

21/2/19

Paper 1 Cognition and behaviour 8182/1 8182

50 100

Paper 2 Social context and behaviour 8182/2 50 100

A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

130

Religious Studies (Short Course) GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8061 601/8399/8 n/a

Discount code:

n/a Entry

code

June 2019 6G19

21/2/19

Option A: Buddhism

and Christianity

Section 1 Buddhism 8061/1

8061A

26.5 27

Section 2 Christianity 8061/2 26.5 27

Section 5 Themes 8061/5 47 48

Option B: Buddhism and Islam

Section 1 Buddhism 8061/1

8061B

26.5 27

Section 3 Islam 8061/3 26.5 27

Section 5 Themes 8061/5 47 48

Option C: Buddhism

and Judaism

Section 1 Buddhism 8061/1

8061C

26.5 27

Section 4 Judaism 8061/4 26.5 27

Section 5 Themes 8061/5 47 48

Option D: Christianity and Islam

Section 2 Christianity 8061/2

8061D

26.5 27

Section 3 Islam 8061/3 26.5 27

Section 5 Themes 8061/5 47 48

Option E: Christianity

and Judaism

Section 2 Christianity 8061/2

8061E

26.5 27

Section 4 Judaism 8061/4 26.5 27

Section 5 Themes 8061/5 47 48

Option F: Islam and Judaism

Section 3 Islam 8061/3

8061F

26.5 27

Section 4 Judaism 8061/4 26.5 27

Section 5 Themes 8061/5 47 48

A single entry is all that is needed for examination paper and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

131

Religious Studies A GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8062 601/8400/0 Other

Discount code:

DD1 4610 Entry

code

June 2019 6G19

21/2/19

Paper 1 The study of religions: beliefs, teachings and practices – two of the paper 1 options (1-7) See notes

below

25 51 25 51

Paper 2 Thematic studies – one of the paper 2 options (A or B) 50 99

Component Component code

Paper 1 options The study of religions: beliefs, teachings and practices

1 Buddhism 8062/11 2 Catholic Christianity 8062/12 3 Christianity 8062/13 4 Hinduism 8062/14 5 Islam 8062/15 6 Judaism 8062/16 7 Sikhism 8062/17

Paper 2 options Thematic studies

A Excluding textual studies 8062/2A B Including textual studies 8062/2B

Entry codes

The table below shows all the valid combinations of papers and associated entry codes.

Paper 1 combination Paper 2 option

A Excluding textual studies

B Including textual studies

1&2 Buddhism and Catholic Christianity 8062AA 8062AB 1&3 Buddhism and Christianity 8062BA 8062BB 1&4 Buddhism and Hinduism 8062CA – 1&5 Buddhism and Islam 8062DA – 1&6 Buddhism and Judaism 8062EA – 1&7 Buddhism and Sikhism 8062FA – 2&4 Catholic Christianity and Hinduism 8062GA 8062GB 2&5 Catholic Christianity and Islam 8062HA 8062HB 2&6 Catholic Christianity and Judaism 8062JA 8062JB 2&7 Catholic Christianity and Sikhism 8062KA 8062KB 3&4 Christianity and Hinduism 8062LA 8062LB 3&5 Christianity and Islam 8062MA 8062MB 3&6 Christianity and Judaism 8062NA 8062NB 3&7 Christianity and Sikhism 8062OA 8062OB 4&5 Hinduism and Islam 8062PA – 4&6 Hinduism and Judaism 8062QA – 4&7 Hinduism and Sikhism 8062RA – 5&6 Islam and Judaism 8062SA – 5&7 Islam and Sikhism 8062TA – 6&7 Judaism and Sikhism 8062UA –

continued on next page

Entry codes 2018/19 - GCSE

132

Religious Studies A (continued) GCSE (GCSE91)

Candidates may only enter for one of the entry options per series. A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

133

Religious Studies B GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8063 601/8401/2 Other

Discount code:

DD1 Entry

code

June 2019 6G19

21/2/19

Islam including religious,

philosophical and ethical

studies

Paper 1 Catholic Christianity 8063/1

8063XA

50 99

Paper 2 Section A: Islam 8063/2X

50 54

Section B: Perspectives on faith (themes) 8063/2A 48

Islam including textual studies

Paper 1 Catholic Christianity 8063/1

8063XB

50 99

Paper 2 Section A: Islam 8063/2X

50 54

Section B: Perspectives on faith (textual studies) 8063/2B 48

Judaism including religious,

philosophical and ethical

studies

Paper 1 Catholic Christianity 8063/1

8063YA

50 99

Paper 2 Section A: Judaism 8063/2Y

50 54

Section B: Perspectives on faith (themes) 8063/2A 48

Judaism including textual studies

Paper 1 Catholic Christianity 8063/1

8063YB

50 99

Paper 2 Section A: Judaism 8063/2Y

50 54

Section B: Perspectives on faith (textual studies) 8063/2B 48

Candidates may only enter for one of the entry options per series. A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

134

Combined Science: Synergy (Double Award) GCSE (GCSE91) See page 112

Combined Science: Trilogy (Double Award) GCSE (GCSE91) See page 113

Sociology new spec GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8192 603/0798/5 Other

Discount code:

EE2

Entry code

June 2019 6G19

21/2/19

Paper 1 The sociology of families and education 8192/1 8192

50 100

Paper 2 The sociology of crime and deviance and social stratification 8192/2 50 100

A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

135

Spanish GCSE (GCSE91)

Series availability

Weight %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8698 601/8160/6 EBacc, Other

Discount code:

FKS Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8698/LF

8698F

25 40

NEA Paper 2 Speaking test 8698/SF 25 60

Written Paper 3 Reading test 8698/RF 25 60

Written Paper 4 Writing test 8698/WF 25 50

Hig

her T

ier

Written Paper 1 Listening test 8698/LH

8698H

25 50

NEA Paper 2 Speaking test 8698/SH 25 60

Written Paper 3 Reading test 8698/RH 25 60

Written Paper 4 Writing test 8698/WH 25 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Statistics new spec GCSE (GCSE91)

Series availability

Weighting %

Max mark

Specification code: Qualification number: Attainment 8 measure(s)

8382 603/1177/0 Other

Discount code:

RB71 Entry

code

June 2019 6G19

21/2/19

Foundation Tier

Paper 1 8382/1F 8382F

50 80

Paper 2 8382/2F 50 80

Higher Tier

Paper 1 8382/1H 8382H

50 80

Paper 2 8382/2H 50 80

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - GCSE

136

Urdu new spec GCSE (GCSE91)

Series availability

Weight %

Max mark

raw

Max mark

scaled Specification code: Qualification number: Attainment 8 measure(s)

8648 603/1119/8 EBacc, Other

Discount code:

FKU Entry

code

June 2019 6G19

21/2/19

Foun

datio

n Ti

er Written Paper 1 Listening test 8648/LF

8648F

25 40 60

NEA Paper 2 Speaking test 8648/SF 25 60 60

Written Paper 3 Reading test 8648/RF 25 60 60

Written Paper 4 Writing test 8648/WF 25 50 60

Hig

her T

ier

Written Paper 1 Listening test 8648/LH

8648H

25 50 60

NEA Paper 2 Speaking test 8648/SH 25 60 60

Written Paper 3 Reading test 8648/RH 25 60 60

Written Paper 4 Writing test 8648/WH 25 60 60

Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is available to private candidates.

Entry codes 2018/19 - Project

137

Level 1 Foundation Project Project (L1PJ)

Series availability

Specification code Basedata group code

7991 7991

Qualification number Discount code Attainment 8 measure(s)

600/9532/5 HC7 n/a

Entry code Jan 2019

1A19 21/10/18

June 2019 6G19

21/2/19

Level 1 Foundation Project 7991

This specification is not available to private candidates.

Level 2 Higher Project Project (L2PJ)

Series availability

Specification code Basedata group code

7992 7992

Qualification number Discount code Attainment 8 measure(s)

600/9533/7 HC7 n/a

Entry code Jan 2019

1A19 21/10/18

June 2019 6G19

21/2/19

Level 2 Higher Project 7992

This specification is not available to private candidates.

Level 3 Extended Project Project (EXPJ)

Series availability

Specification code Basedata group code

7993 7993

Qualification number Discount code Attainment 8 measure(s)

600/9534/9 HC7 n/a

Entry code Nov 2018

BG18 4/10/18

June 2019 6A19

21/2/19

Level 3 Extended Project 7993

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

138

Business: Marketing Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01020 Qualification number Discount code Attainment 8 measure(s)

601/7148/0 BA1 n/a

Jan 2019

June 2019

1 Competitive Business Environment K/506/6075 External exam 12.5

2 Marketing principles Y/506/6086 External exam 12.5

3 Customer communications D/506/6087 Centre assessed n/a* n/a* 12.5

4 Digital essentials D/506/6090 Centre assessed n/a* n/a* 12.5

5 Responsible business practices M/507/6641 Externally assessed 12.5

6 Marketing Research H/506/6088 Centre assessed n/a* n/a* 12.5

7 Stakeholder Engagement H/506/6091 Centre assessed n/a* n/a* 12.5

8 Collaborative project M/506/6076 Centre assessed n/a* n/a* 12.5

All eight units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

139

Business: Marketing Communications Foundation Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01021 Qualification number Discount code Attainment 8 measure(s)

601/7147/9 BA1 n/a

Jan 2019

June 2019

1 Competitive Business Environment K/506/6075 External exam 25

2 Marketing principles Y/506/6086 External exam 25

3 Customer communications D/506/6087 Centre assessed n/a* n/a* 25

4 Digital essentials D/506/6090 Centre assessed n/a* n/a* 25

All four units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

140

Engineering Foundation Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01019 Qualification number Discount code Attainment 8 measure(s)

601/7079/7 XA1 n/a

Jan 2019

June 2019

1 Materials Technology and Science F/506/5952 External exam 25

2 Mechanical Systems H/507/6524 Externally assessed 25

4 Engineering Design D/506/6008 Centre assessed n/a* n/a* 25

5 Production & Manufacturing H/506/6009 Centre assessed n/a* n/a* 25

All four units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

141

Engineering: Design Engineering Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01018 Qualification number Discount code Attainment 8 measure(s)

601/7081/5 XA1 n/a

Jan 2019

June 2019

1 Materials Technology and Science F/506/5952 External exam 12.5

2 Mechanical Systems H/507/6524 Externally assessed 12.5

3 Mathematics for Engineers J/506/5953 External exam 12.5

4 Engineering Design D/506/6008 Centre assessed n/a* n/a* 12.5

5 Production & Manufacturing H/506/6009 Centre assessed n/a* n/a* 12.5

6 Design Visualisation Y/506/6010 Centre assessed n/a* n/a* 12.5

7 Advanced Design for Manufacture D/506/6011 Centre assessed n/a* n/a* 12.5

8 Design Engineer Project Management K/506/6013 Centre assessed n/a* n/a* 12.5

All eight units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

142

Engineering: Mechatronic Engineering Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01016 Qualification number Discount code Attainment 8 measure(s)

601/7080/3 XA1 n/a

Jan 2019

June 2019

1 Materials Technology and Science F/506/5952 External exam 12.5

2 Mechanical Systems H/507/6524 Externally assessed 12.5

3 Mathematics for Engineers J/506/5953 External exam 12.5

4 Engineering Design D/506/6008 Centre assessed n/a* n/a* 12.5

5 Production & Manufacturing H/506/6009 Centre assessed n/a* n/a* 12.5

6 Mechatronic Project Management R/506/6023 Centre assessed n/a* n/a* 12.5

7 Mechatronic Control Systems Y/506/6024 Centre assessed n/a* n/a* 12.5

8 Programming for Engineers D/506/6025 Centre assessed n/a* n/a* 12.5

All eight units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

143

Entertainment Technology: Video Games Art and Animation Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01023 Qualification number Discount code Attainment 8 measure(s)

601/7140/6 JB61 n/a

Jan 2019

June 2019

1 Business for video games M/507/6610 External exam 16.6

3 2D games art A/507/6612 Centre assessed n/a* n/a* 16.6

4 Concept art F/507/6613 Centre assessed n/a* n/a* 16.6

5 3D environment art J/507/6614 Externally assessed 16.6

8 Games animation and VFX D/507/6618 Centre assessed n/a* n/a* 16.6

10 Games mechanics H/507/6622 Centre assessed n/a* n/a* 16.6

All six units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

144

Entertainment Technology: Video Games Art and Design Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01024 Qualification number Discount code Attainment 8 measure(s)

601/7141/8 JB61 n/a

Jan 2019

June 2019

1 Business for video games M/507/6610 External exam 12.5

2 Digital asset management T/507/6611 External exam 12.5

3 2D games art A/507/6612 Centre assessed n/a* n/a* 12.5

4 Concept art F/507/6613 Centre assessed n/a* n/a* 12.5

5 3D environment art J/507/6614 Externally assessed 12.5

8 Games animation and VFX D/507/6618 Centre assessed n/a* n/a* 12.5

9 Level design Y/507/6620 Centre assessed n/a* n/a* 12.5

10 Games mechanics H/507/6622 Centre assessed n/a* n/a* 12.5

All eight units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

145

Entertainment Technology: Video Games Art and Design Production Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01025 Qualification number Discount code Attainment 8 measure(s)

601/7142/X JB61 n/a

Jan 2019

June 2019

1 Business for video games M/507/6610 External exam 8.3

2 Digital asset management T/507/6611 External exam 8.3

3 2D games art A/507/6612 Centre assessed n/a* n/a* 8.3

4 Concept art F/507/6613 Centre assessed n/a* n/a* 8.3

5 3D environment art J/507/6614 Externally assessed 8.3

6 3D character art L/507/6615 Externally assessed 8.3

7 User interface (UI) R/507/6616 Centre assessed n/a* n/a* 8.3

8 Games animation and VFX D/507/6618 Centre assessed n/a* n/a* 8.3

9 Level design Y/507/6620 Centre assessed n/a* n/a* 8.3

10 Games mechanics H/507/6622 Centre assessed n/a* n/a* 8.3

11 Games audio M/507/6624 Centre-assessed n/a* n/a* 8.3

12 Collaborative games development project T/507/6625 Centre assessed n/a* n/a* 8.3

All twelve units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

146

Entertainment Technology: Video Games Art and Mechanics Foundation Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01022 Qualification number Discount code Attainment 8 measure(s)

601/7139/X JB61 n/a

Jan 2019

June 2019

1 Business for video games M/507/6610 External exam 25

3 2D games art A/507/6612 Centre assessed n/a* n/a* 25

5 3D environment art J/507/6614 Externally assessed 25

10 Games mechanics H/507/6622 Centre assessed n/a* n/a* 25

All four units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

147

IT: Cyber Security Foundation Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01010 Qualification number Discount code Attainment 8 measure(s)

601/7124/8 XA1 n/a

Jan 2019

June 2019

1 Fundamental principles of computing Y/507/6424 External exam 25

2 Communication technologies H/507/6426 External exam 25

3 Developing and maintaining computer networks K/507/6427 Centre assessed n/a* n/a* 25

4 Network threats and vulnerabilities A/507/6433 Centre assessed n/a* n/a* 25

All four units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

148

IT: Cyber Security and Security Administration Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01009 Qualification number Discount code Attainment 8 measure(s)

601/7127/3 CN1 n/a

Jan 2019

June 2019

1 Fundamental principles of computing Y/507/6424 External exam 12.5

2 Communication technologies H/507/6426 External exam 12.5

3 Developing and maintaining computer networks K/507/6427 Centre assessed n/a** n/a** 12.5

4 Network threats and vulnerabilities A/507/6433 Centre assessed n/a** n/a** 12.5

5 Maths for computing R/507/6437 Centre assessed n/a** n/a** 12.5

6 Network and cyber security administration J/507/6435 External exam 12.5

7 Managing identity and access to systems Y/507/6438 Centre assessed n/a** n/a** 12.5

8* Programming for networking and security D/507/6439 Centre assessed n/a** n/a** 12.5

9* Computer forensic investigation R/507/6440 Centre assessed n/a** n/a** 12.5

Eight units including one of units 8 and 9 must be completed to achieve the full qualification

* Optional unit ** Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to

Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

149

IT: Networking Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01011 Qualification number Discount code Attainment 8 measure(s)

601/7128/5 CN1 n/a

Jan 2019

June 2019

1 Fundamental Principles of Computing Y/507/6424 External exam 12.5

2 Communication Technologies H/507/6426 External exam 12.5

3 Developing and Maintaining Computer Networks K/507/6427 Centre assessed n/a* n/a* 12.5

4 Supporting End Users M/507/6428 Centre assessed n/a* n/a* 12.5

5 Mathematics for Computing R/507/6437 Centre assessed 12.5

6 Network Security Management A/507/6495 External exam 12.5

7 The Internet F/507/6496 Centre assessed n/a* n/a* 12.5

8 Industrial project A/507/6464 Centre assessed n/a* n/a* 12.5

All eight units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

150

IT: Programming Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01013 Qualification number Discount code Attainment 8 measure(s)

601/7129/7 CN1 n/a

Jan 2019

June 2019

1 Fundamental Principles of Computing Y/507/6424 External exam 12.5

2 Computer Programming F/507/6465 External exam 12.5

3 Website Technologies M/507/6476 Centre assessed n/a* n/a* 12.5

4 Mobile Applications Programming Y/507/6486 Centre assessed n/a* n/a* 12.5

5 Mathematics for Programmers Y/507/6469 External exam 12.5

6 Event Driven Programming D/507/6487 Centre assessed n/a* n/a* 12.5

7 Object Oriented Programming K/507/6489 Centre assessed n/a* n/a* 12.5

8 Industrial Project A/507/6464 Centre assessed n/a* n/a* 12.5

All eight units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

151

IT: Scripting and App Programming Foundation Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01015 Qualification number Discount code Attainment 8 measure(s)

601/7125/X CN1 n/a

Jan 2019

June 2019

1 Fundamental principles of computing Y/507/6424 External exam 25

2 Computer Programming F/507/6465 External exam 25

3 Website Technologies M/507/6476 Centre assessed n/a* n/a* 25

4 Mobile Applications Programming Y/507/6486 Centre assessed n/a* n/a* 25

All four units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

152

IT: Technical Support Foundation Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01014 Qualification number Discount code Attainment 8 measure(s)

601/7126/1 CN1 n/a

Jan 2019

June 2019

1 Fundamental principles of computing Y/507/6424 External exam 25

2 Communication technologies H/507/6426 External exam 25

3 Developing and maintaining computer networks K/507/6427 Centre assessed n/a* n/a* 25

4 Supporting end users M/507/6428 Centre assessed n/a* n/a* 25

All four units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Tech-level

153

IT: User Support Tech-level (Level 3)

Series availability

Weighting %

Specification code TVQ01012 Qualification number Discount code Attainment 8 measure(s)

601/7130/3 CN1 n/a

Jan 2019

June 2019

1 Fundamental Principles of Computing Y/507/6424 External exam 12.5

2 Communication Technologies H/507/6426 External exam 12.5

3 Developing and Maintaining Computer Networks K/507/6427 Centre assessed n/a* n/a* 12.5

4 Supporting End Users M/507/6428 Centre assessed n/a* n/a* 12.5

5 Installing and maintaining software M/507/6493 Centre assessed n/a* n/a* 12.5

6 Organisational systems security T/507/6494 External exam 12.5

7 Computer forensic investigation R/507/6440 Centre assessed n/a* n/a* 12.5

8 Industrial project A/507/6464 Centre assessed n/a* n/a* 12.5

All eight units must be completed to achieve the full qualification

*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.

Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).

Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including

• How to apply for centre approval

• Registration of learners

• Dealing with Recognition of Prior Learning (RPL)

• How to make examination entries

• Dealing with missed examination dates

• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision

• Retention of learner work and assessment/IQA records

• Dealing with potential malpractice or maladministration

Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.

This specification is not available to private candidates.

Entry codes 2018/19 - Technical Award

154

Performing Arts Level 1/2 Technical Award (TA)

Series availability

Weighting %

Max UMS

Specification code Basedata group code Qualification number: Attainment 8 measure(s)

3745 3745 603/0508/3 Other

Discount code: LC11 Entry code

June 2019 6G19

21/2/19

Unit 1 Unlocking creativity Internally assessed PER1 30 90

Unit 2 The production/performance Internally assessed PER2 30 90

Unit 3 The performing arts experience Externally assessed PER3 40 120

Subject award 3746 - 300

A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required.

The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.

This specification is not available to private candidates.

Entry codes 2018/19 - Index

155

Entry code Qualification Entry description

1011 GCE Archaeology: Advanced Subsidiary Award 34

1021 GCE Classical Civilisation: Advanced Subsidiary Award 46

1101 GCE Citizenship Studies: Advanced Subsidiary Award 45

1111 GCE Anthropology: Advanced Subsidiary Award 33

1121 GCE Accounting: Advanced Subsidiary Award 32

1151 GCE Government and Politics: Advanced Subsidiary Award 72

1161 GCE Law: Advanced Subsidiary Award 80

1176 GCE Philosophy: Advanced Subsidiary Award 92

1251 GCE History of Art: Advanced Subsidiary Award 78

1350A AQA Certificate Certificate in Mathematical Studies: Option A: statistical techniques 17

1350B AQA Certificate Certificate in Mathematical Studies: Option B: critical path & risk analysis 17

1350C AQA Certificate Certificate in Mathematical Studies: Option C: Graphical techniques 17

1431 GCE Electronics: Advanced Subsidiary Award 60

1441 GCE Environmental Studies: Advanced Subsidiary Award 65

1521 GCE Information and Communication Technology: Advanced Subsidiary Award 79

1541 GCE Design and Technology: Food Technology: Advanced Subsidiary Award 53

1551 GCE Design and Technology: Product Design (3-D Design): AS Award 54

1556 GCE Design and Technology: Systems and Control Technology: AS Award 57

1561 GCE Design and Technology: Product Design (Textiles): AS Award 55

1571 GCE Media Studies: Advanced Subsidiary Award 87

1626 GCE Communication and Culture: Advanced Subsidiary Award 47

1636 GCE Bengali: Advanced Subsidiary Award 41

1676 GCE Modern Hebrew: Advanced Subsidiary Award 89

1681 GCE Panjabi: Advanced Subsidiary Award 91

1686 GCE Polish: Advanced Subsidiary Award 96

1751 GCE Creative Writing: Advanced Subsidiary Award 50

1761 GCE General Studies A: Advanced Subsidiary Award 68

1766 GCE General Studies B: Advanced Subsidiary Award 69

1776 AQA Certificate Certificate in Applied Science (Applied General): Award 16

1777 AQA Certificate Extended Certificate in Applied Science (Applied General): Award 16

1821 GCE Health and Social Care: Advanced Subsidiary Award 73

1822 GCE Health and Social Care: Advanced Subsidiary Double Award 73

1831 AQA Certificate Certificate in Applied Business (Applied General): Award 15

1832 AQA Certificate Extended Certificate in Applied Business (Applied General): Award 15

2011 GCE Archaeology: Advanced Award 34

2021 GCE Classical Civilisation: Advanced Award 46

2101 GCE Citizenship Studies: Advanced Award 45

2111 GCE Anthropology: Advanced Award 33

2121 GCE Accounting: Advanced Award 32

Entry codes 2018/19 - Index

156

Entry code Qualification Entry description

2151 GCE Government and Politics: Advanced Award 72

2161 GCE Law: Advanced Award 80

2176 GCE Philosophy: Advanced Award 92

2251 GCE History of Art: Advanced Award 78

2431 GCE Electronics: Advanced Award 60

2441 GCE Environmental Studies: Advanced Award 65

2521 GCE Information and Communication Technology: Advanced Award 79

2541 GCE Design and Technology: Food Technology: Advanced Award 53

2551 GCE Design and Technology: Product Design (3-D Design): Advanced Award 54

2556 GCE Design and Technology: Systems and Control Technology: Advanced Award 57

2561 GCE Design and Technology: Product Design (Textiles): Advanced Award 55

2571 GCE Media Studies: Advanced Award 87

2626 GCE Communication and Culture: Advanced Award 47

2636 GCE Bengali: Advanced Award 41

2676 GCE Modern Hebrew: Advanced Award 89

2681 GCE Panjabi: Advanced Award 91

2686 GCE Polish: Advanced Award 96

2751 GCE Creative Writing: Advanced Award 50

2761 GCE General Studies A: Advanced Award 68

2766 GCE General Studies B: Advanced Award 69

2821 GCE Health and Social Care: Advanced Single Award 73

2822 GCE Health and Social Care: Advanced Double Award 73

3716 AQA L1/2 Award Children’s Learning and Development: Award 19

3721 AQA L1/2 Award Fashion and Textiles: Award 19

3726 AQA L1/2 Award Food and Catering: Award 20

3731 AQA L1/2 Award Health and Social Care: Award 20

3736 AQA L1/2 Award Information Technology: Award 21

3741 AQA L1/2 Award Materials Technology: Award 21

3746 AQA L1/2 Award Performing Arts: Award 154

3751 AQA L1/2 Award Sport: Award 22

3756 AQA L1/2 Award Visual Communication: Award 23

3766 AQA L1/2 Award STEM: Award 22

4367 Func Skills Functional Mathematics: Level 1 31

4368 Func Skills Functional Mathematics: Level 2 31

47201 Func Skills Functional English: Level 1: Reading: Paper based 29

47201S Func Skills Functional English: Level 1: Reading: On-screen 29

47202 Func Skills Functional English: Level 1: Writing: Paper based 29

47202S Func Skills Functional English: Level 1: Writing: On-screen 29

47203 Func Skills Functional English: Level 1: Speaking, listening and communication 29

Entry codes 2018/19 - Index

157

Entry code Qualification Entry description

4721 Func Skills Functional English: Level 1 Award 29

47251 Func Skills Functional English: Level 2: Reading: Paper based 30

47251S Func Skills Functional English: Level 2: Reading: On-screen 30

47252 Func Skills Functional English: Level 2: Writing: Paper based 30

47252S Func Skills Functional English: Level 2: Writing: On-screen 30

47253 Func Skills Functional English: Level 2: Speaking, listening and communication 30

4726 Func Skills Functional English: Level 2 Award 30

4800 AQA Certificate Certificate in Preparation for Working Life: Short Course 18

4801 AQA Certificate Certificate in Preparation for Working Life 18

5361 GCE Mathematics: Advanced Subsidiary Award 83

5366 GCE Pure Mathematics: Advanced Subsidiary Award 83

5371 GCE Further Mathematics: Advanced Subsidiary Award 83

5381 GCE Statistics: Advanced Subsidiary Award 102

5800 PSE Personal and Social Education (QCF) 18

5930 ELC Mathematics 24

5961 ELC Science (Single award) 25

5962 ELC Science (Double award) 25

5972 ELC Step Up to English - Silver Step 24

5973 ELC Step Up to English - Gold Step 24

6361 GCE Mathematics: Advanced Award 83

6366 GCE Pure Mathematics: Advanced Award 83

6371 GCE Further Mathematics: Advanced Award 83

6381 GCE Statistics: Advanced Award 102

7036 GCE AS Geography 70

7037 GCE A-level Geography 70

7041AA GCE AS History : Paper 1 Option A + Paper 2 Option A 75

7041AB GCE AS History : Paper 1 Option A + Paper 2 Option B 75

7041AD GCE AS History : Paper 1 Option A + Paper 2 Option D 75

7041AE GCE AS History : Paper 1 Option A + Paper 2 Option E 75

7041AM GCE AS History : Paper 1 Option A + Paper 2 Option M 75

7041AS GCE AS History : Paper 1 Option A + Paper 2 Option S 75

7041BA GCE AS History : Paper 1 Option B + Paper 2 Option A 75

7041BB GCE AS History : Paper 1 Option B + Paper 2 Option B 75

7041BD GCE AS History : Paper 1 Option B + Paper 2 Option D 75

7041BE GCE AS History : Paper 1 Option B + Paper 2 Option E 75

7041BM GCE AS History : Paper 1 Option B + Paper 2 Option M 75

7041BS GCE AS History : Paper 1 Option B + Paper 2 Option S 75

7041CF GCE AS History : Paper 1 Option C + Paper 2 Option F 75

7041CG GCE AS History : Paper 1 Option C + Paper 2 Option G 75

Entry codes 2018/19 - Index

158

Entry code Qualification Entry description

7041CH GCE AS History : Paper 1 Option C + Paper 2 Option H 75

7041CJ GCE AS History : Paper 1 Option C + Paper 2 Option J 75

7041CK GCE AS History : Paper 1 Option C + Paper 2 Option K 75

7041CL GCE AS History : Paper 1 Option C + Paper 2 Option L 75

7041CN GCE AS History : Paper 1 Option C + Paper 2 Option N 75

7041CO GCE AS History : Paper 1 Option C + Paper 2 Option O 75

7041CP GCE AS History : Paper 1 Option C + Paper 2 Option P 75

7041CQ GCE AS History : Paper 1 Option C + Paper 2 Option Q 75

7041CR GCE AS History : Paper 1 Option C + Paper 2 Option R 75

7041CT GCE AS History : Paper 1 Option C + Paper 2 Option T 75

7041DC GCE AS History : Paper 1 Option D + Paper 2 Option C 75

7041DG GCE AS History : Paper 1 Option D + Paper 2 Option G 75

7041DH GCE AS History : Paper 1 Option D + Paper 2 Option H 75

7041DJ GCE AS History : Paper 1 Option D + Paper 2 Option J 75

7041DK GCE AS History : Paper 1 Option D + Paper 2 Option K 75

7041DL GCE AS History : Paper 1 Option D + Paper 2 Option L 75

7041DN GCE AS History : Paper 1 Option D + Paper 2 Option N 75

7041DO GCE AS History : Paper 1 Option D + Paper 2 Option O 75

7041DP GCE AS History : Paper 1 Option D + Paper 2 Option P 75

7041DQ GCE AS History : Paper 1 Option D + Paper 2 Option Q 75

7041DR GCE AS History : Paper 1 Option D + Paper 2 Option R 75

7041DT GCE AS History : Paper 1 Option D + Paper 2 Option T 75

7041EA GCE AS History : Paper 1 Option E + Paper 2 Option A 75

7041EB GCE AS History : Paper 1 Option E + Paper 2 Option B 75

7041ED GCE AS History : Paper 1 Option E + Paper 2 Option D 75

7041EE GCE AS History : Paper 1 Option E + Paper 2 Option E 75

7041EM GCE AS History : Paper 1 Option E + Paper 2 Option M 75

7041ES GCE AS History : Paper 1 Option E + Paper 2 Option S 75

7041FC GCE AS History : Paper 1 Option F + Paper 2 Option C 75

7041FF GCE AS History : Paper 1 Option F + Paper 2 Option F 75

7041FG GCE AS History : Paper 1 Option F + Paper 2 Option G 75

7041FH GCE AS History : Paper 1 Option F + Paper 2 Option H 75

7041FJ GCE AS History : Paper 1 Option F + Paper 2 Option J 75

7041FK GCE AS History : Paper 1 Option F + Paper 2 Option K 75

7041FL GCE AS History : Paper 1 Option F + Paper 2 Option L 75

7041FN GCE AS History : Paper 1 Option F + Paper 2 Option N 75

7041FO GCE AS History : Paper 1 Option F + Paper 2 Option O 75

7041FP GCE AS History : Paper 1 Option F + Paper 2 Option P 75

7041FQ GCE AS History : Paper 1 Option F + Paper 2 Option Q 75

Entry codes 2018/19 - Index

159

Entry code Qualification Entry description

7041FR GCE AS History : Paper 1 Option F + Paper 2 Option R 75

7041FT GCE AS History : Paper 1 Option F + Paper 2 Option T 75

7041GC GCE AS History : Paper 1 Option G + Paper 2 Option C 75

7041GF GCE AS History : Paper 1 Option G + Paper 2 Option F 75

7041GG GCE AS History : Paper 1 Option G + Paper 2 Option G 75

7041GH GCE AS History : Paper 1 Option G + Paper 2 Option H 75

7041GJ GCE AS History : Paper 1 Option G + Paper 2 Option J 75

7041GK GCE AS History : Paper 1 Option G + Paper 2 Option K 75

7041GL GCE AS History : Paper 1 Option G + Paper 2 Option L 75

7041GN GCE AS History : Paper 1 Option G + Paper 2 Option N 75

7041GO GCE AS History : Paper 1 Option G + Paper 2 Option O 75

7041GP GCE AS History : Paper 1 Option G + Paper 2 Option P 75

7041GQ GCE AS History : Paper 1 Option G + Paper 2 Option Q 75

7041GR GCE AS History : Paper 1 Option G + Paper 2 Option R 75

7041GT GCE AS History : Paper 1 Option G + Paper 2 Option T 75

7041HA GCE AS History : Paper 1 Option H + Paper 2 Option A 75

7041HB GCE AS History : Paper 1 Option H + Paper 2 Option B 75

7041HD GCE AS History : Paper 1 Option H + Paper 2 Option D 75

7041HE GCE AS History : Paper 1 Option H + Paper 2 Option E 75

7041HM GCE AS History : Paper 1 Option H + Paper 2 Option M 75

7041HS GCE AS History : Paper 1 Option H + Paper 2 Option S 75

7041JC GCE AS History : Paper 1 Option J + Paper 2 Option C 75

7041JF GCE AS History : Paper 1 Option J + Paper 2 Option F 75

7041JG GCE AS History : Paper 1 Option J + Paper 2 Option G 75

7041JH GCE AS History : Paper 1 Option J + Paper 2 Option H 75

7041JJ GCE AS History : Paper 1 Option J + Paper 2 Option J 75

7041JK GCE AS History : Paper 1 Option J + Paper 2 Option K 75

7041JL GCE AS History : Paper 1 Option J + Paper 2 Option L 75

7041JN GCE AS History : Paper 1 Option J + Paper 2 Option N 75

7041JO GCE AS History : Paper 1 Option J + Paper 2 Option O 75

7041JP GCE AS History : Paper 1 Option J + Paper 2 Option P 75

7041JQ GCE AS History : Paper 1 Option J + Paper 2 Option Q 75

7041JR GCE AS History : Paper 1 Option J + Paper 2 Option R 75

7041JT GCE AS History : Paper 1 Option J + Paper 2 Option T 75

7041KA GCE AS History : Paper 1 Option K + Paper 2 Option A 75

7041KB GCE AS History : Paper 1 Option K + Paper 2 Option B 75

7041KD GCE AS History : Paper 1 Option K + Paper 2 Option D 75

7041KE GCE AS History : Paper 1 Option K + Paper 2 Option E 75

7041KM GCE AS History : Paper 1 Option K + Paper 2 Option M 75

Entry codes 2018/19 - Index

160

Entry code Qualification Entry description

7041KS GCE AS History : Paper 1 Option K + Paper 2 Option S 75

7041LA GCE AS History : Paper 1 Option L + Paper 2 Option A 75

7041LB GCE AS History : Paper 1 Option L + Paper 2 Option B 75

7041LD GCE AS History : Paper 1 Option L + Paper 2 Option D 75

7041LE GCE AS History : Paper 1 Option L + Paper 2 Option E 75

7041LM GCE AS History : Paper 1 Option L + Paper 2 Option M 75

7041LS GCE AS History : Paper 1 Option L + Paper 2 Option S 75

7042AA GCE A-level History : Paper 1 Option A + Paper 2 Option A 77

7042AB GCE A-level History : Paper 1 Option A + Paper 2 Option B 77

7042AD GCE A-level History : Paper 1 Option A + Paper 2 Option D 77

7042AE GCE A-level History : Paper 1 Option A + Paper 2 Option E 77

7042AM GCE A-level History : Paper 1 Option A + Paper 2 Option M 77

7042AS GCE A-level History : Paper 1 Option A + Paper 2 Option S 77

7042BA GCE A-level History : Paper 1 Option B + Paper 2 Option A 77

7042BB GCE A-level History : Paper 1 Option B + Paper 2 Option B 77

7042BD GCE A-level History : Paper 1 Option B + Paper 2 Option D 77

7042BE GCE A-level History : Paper 1 Option B + Paper 2 Option E 77

7042BM GCE A-level History : Paper 1 Option B + Paper 2 Option M 77

7042BS GCE A-level History : Paper 1 Option B + Paper 2 Option S 77

7042CF GCE A-level History : Paper 1 Option C + Paper 2 Option F 77

7042CG GCE A-level History : Paper 1 Option C + Paper 2 Option G 77

7042CH GCE A-level History : Paper 1 Option C + Paper 2 Option H 77

7042CJ GCE A-level History : Paper 1 Option C + Paper 2 Option J 77

7042CK GCE A-level History : Paper 1 Option C + Paper 2 Option K 77

7042CL GCE A-level History : Paper 1 Option C + Paper 2 Option L 77

7042CN GCE A-level History : Paper 1 Option C + Paper 2 Option N 77

7042CO GCE A-level History : Paper 1 Option C + Paper 2 Option O 77

7042CP GCE A-level History : Paper 1 Option C + Paper 2 Option P 77

7042CQ GCE A-level History : Paper 1 Option C + Paper 2 Option Q 77

7042CR GCE A-level History : Paper 1 Option C + Paper 2 Option R 77

7042CT GCE A-level History : Paper 1 Option C + Paper 2 Option T 77

7042DC GCE A-level History : Paper 1 Option D + Paper 2 Option C 77

7042DG GCE A-level History : Paper 1 Option D + Paper 2 Option G 77

7042DH GCE A-level History : Paper 1 Option D + Paper 2 Option H 77

7042DJ GCE A-level History : Paper 1 Option D + Paper 2 Option J 77

7042DK GCE A-level History : Paper 1 Option D + Paper 2 Option K 77

7042DL GCE A-level History : Paper 1 Option D + Paper 2 Option L 77

7042DN GCE A-level History : Paper 1 Option D + Paper 2 Option N 77

7042DO GCE A-level History : Paper 1 Option D + Paper 2 Option O 77

Entry codes 2018/19 - Index

161

Entry code Qualification Entry description

7042DP GCE A-level History : Paper 1 Option D + Paper 2 Option P 77

7042DQ GCE A-level History : Paper 1 Option D + Paper 2 Option Q 77

7042DR GCE A-level History : Paper 1 Option D + Paper 2 Option R 77

7042DT GCE A-level History : Paper 1 Option D + Paper 2 Option T 77

7042EA GCE A-level History : Paper 1 Option E + Paper 2 Option A 77

7042EB GCE A-level History : Paper 1 Option E + Paper 2 Option B 77

7042ED GCE A-level History : Paper 1 Option E + Paper 2 Option D 77

7042EE GCE A-level History : Paper 1 Option E + Paper 2 Option E 77

7042EM GCE A-level History : Paper 1 Option E + Paper 2 Option M 77

7042ES GCE A-level History : Paper 1 Option E + Paper 2 Option S 77

7042FC GCE A-level History : Paper 1 Option F + Paper 2 Option C 77

7042FF GCE A-level History : Paper 1 Option F + Paper 2 Option F 77

7042FG GCE A-level History : Paper 1 Option F + Paper 2 Option G 77

7042FH GCE A-level History : Paper 1 Option F + Paper 2 Option H 77

7042FJ GCE A-level History : Paper 1 Option F + Paper 2 Option J 77

7042FK GCE A-level History : Paper 1 Option F + Paper 2 Option K 77

7042FL GCE A-level History : Paper 1 Option F + Paper 2 Option L 77

7042FN GCE A-level History : Paper 1 Option F + Paper 2 Option N 77

7042FO GCE A-level History : Paper 1 Option F + Paper 2 Option O 77

7042FP GCE A-level History : Paper 1 Option F + Paper 2 Option P 77

7042FQ GCE A-level History : Paper 1 Option F + Paper 2 Option Q 77

7042FR GCE A-level History : Paper 1 Option F + Paper 2 Option R 77

7042FT GCE A-level History : Paper 1 Option F + Paper 2 Option T 77

7042GC GCE A-level History : Paper 1 Option G + Paper 2 Option C 77

7042GF GCE A-level History : Paper 1 Option G + Paper 2 Option F 77

7042GG GCE A-level History : Paper 1 Option G + Paper 2 Option G 77

7042GH GCE A-level History : Paper 1 Option G + Paper 2 Option H 77

7042GJ GCE A-level History : Paper 1 Option G + Paper 2 Option J 77

7042GK GCE A-level History : Paper 1 Option G + Paper 2 Option K 77

7042GL GCE A-level History : Paper 1 Option G + Paper 2 Option L 77

7042GN GCE A-level History : Paper 1 Option G + Paper 2 Option N 77

7042GO GCE A-level History : Paper 1 Option G + Paper 2 Option O 77

7042GP GCE A-level History : Paper 1 Option G + Paper 2 Option P 77

7042GQ GCE A-level History : Paper 1 Option G + Paper 2 Option Q 77

7042GR GCE A-level History : Paper 1 Option G + Paper 2 Option R 77

7042GT GCE A-level History : Paper 1 Option G + Paper 2 Option T 77

7042HA GCE A-level History : Paper 1 Option H + Paper 2 Option A 77

7042HB GCE A-level History : Paper 1 Option H + Paper 2 Option B 77

7042HD GCE A-level History : Paper 1 Option H + Paper 2 Option D 77

Entry codes 2018/19 - Index

162

Entry code Qualification Entry description

7042HE GCE A-level History : Paper 1 Option H + Paper 2 Option E 77

7042HM GCE A-level History : Paper 1 Option H + Paper 2 Option M 77

7042HS GCE A-level History : Paper 1 Option H + Paper 2 Option S 77

7042JC GCE A-level History : Paper 1 Option J + Paper 2 Option C 77

7042JF GCE A-level History : Paper 1 Option J + Paper 2 Option F 77

7042JG GCE A-level History : Paper 1 Option J + Paper 2 Option G 77

7042JH GCE A-level History : Paper 1 Option J + Paper 2 Option H 77

7042JJ GCE A-level History : Paper 1 Option J + Paper 2 Option J 77

7042JK GCE A-level History : Paper 1 Option J + Paper 2 Option K 77

7042JL GCE A-level History : Paper 1 Option J + Paper 2 Option L 77

7042JN GCE A-level History : Paper 1 Option J + Paper 2 Option N 77

7042JO GCE A-level History : Paper 1 Option J + Paper 2 Option O 77

7042JP GCE A-level History : Paper 1 Option J + Paper 2 Option P 77

7042JQ GCE A-level History : Paper 1 Option J + Paper 2 Option Q 77

7042JR GCE A-level History : Paper 1 Option J + Paper 2 Option R 77

7042JT GCE A-level History : Paper 1 Option J + Paper 2 Option T 77

7042KA GCE A-level History : Paper 1 Option K + Paper 2 Option A 77

7042KB GCE A-level History : Paper 1 Option K + Paper 2 Option B 77

7042KD GCE A-level History : Paper 1 Option K + Paper 2 Option D 77

7042KE GCE A-level History : Paper 1 Option K + Paper 2 Option E 77

7042KM GCE A-level History : Paper 1 Option K + Paper 2 Option M 77

7042KS GCE A-level History : Paper 1 Option K + Paper 2 Option S 77

7042LA GCE A-level History : Paper 1 Option L + Paper 2 Option A 77

7042LB GCE A-level History : Paper 1 Option L + Paper 2 Option B 77

7042LD GCE A-level History : Paper 1 Option L + Paper 2 Option D 77

7042LE GCE A-level History : Paper 1 Option L + Paper 2 Option E 77

7042LM GCE A-level History : Paper 1 Option L + Paper 2 Option M 77

7042LS GCE A-level History : Paper 1 Option L + Paper 2 Option S 77

7061A GCE AS Religious Studies : Option A Buddhism 98

7061B GCE AS Religious Studies : Option B Christianity 98

7061C GCE AS Religious Studies : Option C Hinduism 98

7061D GCE AS Religious Studies : Option D Islam 98

7061E GCE AS Religious Studies : Option E Judaism 98

7062A GCE A-level Religious Studies : Option A Buddhism 98

7062B GCE A-level Religious Studies : Option B Christianity 98

7062C GCE A-level Religious Studies : Option C Hinduism 98

7062D GCE A-level Religious Studies : Option D Islam 98

7062E GCE A-level Religious Studies : Option E Judaism 98

7126 GCE AS Accounting 32

Entry codes 2018/19 - Index

163

Entry code Qualification Entry description

7127 GCE A-level Accounting 32

7131 GCE AS Business Studies 43

7132 GCE A-level Business Studies 43

7135 GCE AS Economics 59

7136 GCE A-level Economics 59

7151 GCE AS Politics 96

7152 GCE A-level Politics 96

7161 GCE AS Law 81

7162A GCE A-level Law Option A: Contract 81

7162B GCE A-level Law Option B: Human Rights 81

7171 GCE AS Philosophy 92

7172 GCE A-level Philosophy 92

7181 GCE AS Psychology 97

7182 GCE A-level Psychology 97

7191 GCE AS Sociology 100

7192 GCE A-level Sociology 100

7201 GCE A-level Art and Design: Art, craft and design 35

7202 GCE A-level Art and Design: Fine art 36

7203 GCE A-level Art and Design: Graphic communication 37

7204 GCE A-level Art and Design: Textile design 39

7205 GCE A-level Art and Design: 3-D design 40

7206 GCE A-level Art and Design: Photography 38

7236 GCE AS Dance 51

7237 GCE A-level Dance 51

7241 GCE AS Art and Design: Art, craft and design 35

7242 GCE AS Art and Design: Fine art 36

7243 GCE AS Art and Design: Graphic communication 37

7244 GCE AS Art and Design: Textile design 39

7245 GCE AS Art and Design: 3-D design 40

7246 GCE AS Art and Design: Photography 38

7261 GCE AS Drama and Theatre 58

7262 GCE A-level Drama and Theatre 58

7271 GCE AS Music 90

7272 GCE A-level Music 90

7356 GCE AS Mathematics 86

7357 GCE A-level Mathematics 86

7366DS GCE AS Further Mathematics: Discrete and Statistics 67

7366MD GCE AS Further Mathematics: Mechanics and Discrete 67

7366SM GCE AS Further Mathematics: Statistics and Mechanics 67

Entry codes 2018/19 - Index

164

Entry code Qualification Entry description

7367DS GCE A-level Further Mathematics: Discrete and Statistics 67

7367MD GCE A-level Further Mathematics: Mechanics and Discrete 67

7367SM GCE A-level Further Mathematics: Statistics and Mechanics 67

7401 GCE AS Biology 42

7402 GCE A-level Biology 42

7404 GCE AS Chemistry 44

7405 GCE A-level Chemistry 44

7407 GCE AS Physics 94

7408A GCE A-level Physics: Option A: Astrophysics 94

7408B GCE A-level Physics: Option B: Medical Physics 94

7408C GCE A-level Physics: Option C: Engineering Physics 94

7408D GCE A-level Physics: Option D: Turning Points in Physics 94

7408E GCE A-level Physics: Option E: Electronics 94

7446 GCE AS Environmental Science 65

7447 GCE A-level Environmental Science 65

7516A GCE AS Computer Science: Option A: C# 48

7516B GCE AS Computer Science: Option B: Java 48

7516C GCE AS Computer Science: Option C: Pascal/Delphi 48

7516D GCE AS Computer Science: Option D: Python 48

7516E GCE AS Computer Science: Option E: VB.Net 48

7517A GCE A-level Computer Science: Option A: C# 48

7517B GCE A-level Computer Science: Option B: Java 48

7517C GCE A-level Computer Science: Option C: Pascal/Delphi 48

7517D GCE A-level Computer Science: Option D: Python 48

7517E GCE A-level Computer Science: Option E: VB.Net 48

7551 GCE AS Design and Technology: Product Design 56

7552 GCE A-level Design and Technology: Product Design 56

7561 GCE AS Design and Technology: Fashion and Textiles 52

7562 GCE A-level Design and Technology: Fashion and Textiles 52

7571 GCE AS Media Studies 88

7572 GCE A-level Media Studies 88

7581 GCE AS Physical Education 93

7582 GCE A-level Physical Education 93

7651T GCE AS French : Option T 66

7651V GCE AS French : Option V 66

7652T GCE A-level French : Option T 66

7652V GCE A-level French : Option V 66

7661T GCE AS German : Option T 71

7661V GCE AS German : Option V 71

Entry codes 2018/19 - Index

165

Entry code Qualification Entry description

7662T GCE A-level German : Option T 71

7662V GCE A-level German : Option V 71

7691T GCE AS Spanish : Option T 101

7691V GCE AS Spanish : Option V 101

7692T GCE A-level Spanish : Option T 101

7692V GCE A-level Spanish : Option V 101

7701 GCE AS English Language 61

7702 GCE A-level English Language 61

7706 GCE AS English Language and Literature 62

7707 GCE A-level English Language and Literature 62

7711 GCE AS English Literature 63

7712A GCE A-level English Literature A: Option A: WW1 63

7712B GCE A-level English Literature A: Option B: Modern Times 63

7716AA GCE AS English Literature B: Option A & A: Drama Tragedy & Prose Tragedy 64

7716AB GCE AS English Literature B: Option A & B: Drama Tragedy & Prose Comedy 64

7716BA GCE AS English Literature B: Option B & A: Drama Comedy & Prose Tragedy 64

7716BB GCE AS English Literature B: Option B & B: Drama Comedy & Prose Comedy 64

7717AA GCE A-level English Literature B: Options A & A: Tragedy & Crime Writing 64

7717AB GCE A-level English Literature B: Options A & B: Tragedy & Political Writing 64

7717BA GCE A-level English Literature B: Options B & A: Comedy & Crime Writing 64

7717BB GCE A-level English Literature B: Options B & B: Comedy & Political Writing 64

7991 Project Level 1 Foundation Project Qualification 137

7992 Project Level 2 Higher Project Qualification 137

7993 Project Level 3 Extended Project Qualification 137

8035 GCSE Geography 120

8061A GCSE Religious Studies (Short Course) Option A: Buddhism and Christianity 130

8061B GCSE Religious Studies (Short Course) Option B: Buddhism and Islam 130

8061C GCSE Religious Studies (Short Course) Option C: Buddhism and Judaism 130

8061D GCSE Religious Studies (Short Course) Option D: Christianity and Islam 130

8061E GCSE Religious Studies (Short Course) Option E: Christianity and Judaism 130

8061F GCSE Religious Studies (Short Course) Option F: Islam and Judaism 130

8062AA GCSE Religious Studies A: Buddhism and Catholic Christianity (excluding textual studies) 131

8062AB GCSE Religious Studies A: Buddhism and Catholic Christianity (including textual studies) 131

8062BA GCSE Religious Studies A: Buddhism and Christianity (excluding textual studies) 131

8062BB GCSE Religious Studies A: Buddhism and Christianity (including textual studies) 131

8062CA GCSE Religious Studies A: Buddhism and Hinduism (excluding textual studies) 131

8062DA GCSE Religious Studies A: Buddhism and Islam (excluding textual studies) 131

8062EA GCSE Religious Studies A: Buddhism and Judaism (excluding textual studies) 131

Entry codes 2018/19 - Index

166

Entry code Qualification Entry description

8062FA GCSE Religious Studies A: Buddhism and Sikhism (excluding textual studies) 131

8062GA GCSE Religious Studies A: Catholic Christianity and Hinduism (excluding textual studies) 131

8062GB GCSE Religious Studies A: Catholic Christianity and Hinduism (including textual studies) 131

8062HA GCSE Religious Studies A: Catholic Christianity and Islam (excluding textual studies) 131

8062HB GCSE Religious Studies A: Catholic Christianity and Islam (including textual studies) 131

8062JA GCSE Religious Studies A: Catholic Christianity and Judaism (excluding textual studies) 131

8062JB GCSE Religious Studies A: Catholic Christianity and Judaism (including textual studies) 131

8062KA GCSE Religious Studies A: Catholic Christianity and Sikhism (excluding textual studies) 131

8062KB GCSE Religious Studies A: Catholic Christianity and Sikhism (including textual studies) 131

8062LA GCSE Religious Studies A: Christianity and Hinduism (excluding textual studies) 131

8062LB GCSE Religious Studies A: Christianity and Hinduism (including textual studies) 131

8062MA GCSE Religious Studies A: Christianity and Islam (excluding textual studies) 131

8062MB GCSE Religious Studies A: Christianity and Islam (including textual studies) 131

8062NA GCSE Religious Studies A: Christianity and Judaism (excluding textual studies) 131

8062NB GCSE Religious Studies A: Christianity and Judaism (including textual studies) 131

8062OA GCSE Religious Studies A: Christianity and Sikhism (excluding textual studies) 131

8062OB GCSE Religious Studies A: Christianity and Sikhism (including textual studies) 131

8062PA GCSE Religious Studies A: Hinduism and Islam (excluding textual studies) 131

8062QA GCSE Religious Studies A: Hinduism and Judaism (excluding textual studies) 131

8062RA GCSE Religious Studies A: Hinduism and Sikhism (excluding textual studies) 131

8062SA GCSE Religious Studies A: Islam and Judaism (excluding textual studies) 131

8062TA GCSE Religious Studies A: Islam and Sikhism (excluding textual studies) 131

8062UA GCSE Religious Studies A: Judaism and Sikhism (excluding textual studies) 131

8063XA GCSE Religious Studies B: Islam including religious, philosophical and ethical studies 133

8063XB GCSE Religious Studies B: Islam including textual studies 133

8063YA GCSE Religious Studies B: Judaism including religious, philosophical and ethical studies 133

8063YB GCSE Religious Studies B: Judaism including textual studies 133

8100 GCSE Citizenship Studies 111

8132 GCSE Business (new) 109

8136 GCSE Economics (new) 116

8182 GCSE Psychology (new) 129

8192 GCSE Sociology (new) 134

8201 GCSE Art and Design (Art, craft and design) 105

8202 GCSE Art and Design (Fine art) 105

Entry codes 2018/19 - Index

167

Entry code Qualification Entry description

8203 GCSE Art and Design (Graphic communication) 106

8204 GCSE Art and Design (Textile design) 106

8205 GCSE Art and Design (Three dimensional design) 107

8206 GCSE Art and Design (Photography) 107

8236 GCSE Dance 115

8261 GCSE Drama 116

8271 GCSE Music 126

8300F GCSE Mathematics : Foundation tier 125

8300H GCSE Mathematics : Higher tier 125

8360 AQA Certificate Certificate in Further Mathematics 17

8382F GCSE Statistics: Foundation tier (new) 135

8382H GCSE Statistics: Higher tier (new) 135

8461F GCSE Biology: Foundation tier 109

8461H GCSE Biology: Higher tier 109

8462F GCSE Chemistry: Foundation tier 110

8462H GCSE Chemistry: Higher tier 110

8463F GCSE Physics: Foundation tier 128

8463H GCSE Physics: Higher tier 128

8464F GCSE Combined Science: Trilogy (Double Award) Foundation tier 113

8464H GCSE Combined Science: Trilogy (Double Award) Higher tier 113

8465F GCSE Combined Science: Synergy (Double Award) Foundation tier 112

8465H GCSE Combined Science: Synergy (Double Award) Higher tier 112

8520 GCSE Computer Science 114

8552 GCSE Design and Technology (new) 115

8572 GCSE Media Studies (new) 125

8582 GCSE Physical Education 127

8585 GCSE Food Preparation and Nutrition 119

8633F GCSE Italian: Foundation tier (new) 124

8633H GCSE Italian: Higher tier (new) 124

8638F GCSE Bengali: Foundation tier (new) 108

8638H GCSE Bengali: Higher tier (new) 108

8648F GCSE Urdu: Foundation tier (new) 136

8648H GCSE Urdu: Higher tier (new) 136

8658F GCSE French: Foundation tier 120

8658H GCSE French: Higher tier 120

8668F GCSE German: Foundation tier 121

8668H GCSE German: Higher tier 121

8673F GCSE Chinese (Spoken Mandarin): Foundation tier (new) 111

8673H GCSE Chinese (Spoken Mandarin): Higher tier (new) 111

Entry codes 2018/19 - Index

168

Entry code Qualification Entry description

8678F GCSE Modern Hebrew: Foundation tier (new) 126

8678H GCSE Modern Hebrew: Higher tier (new) 126

8683F GCSE Panjabi: Foundation tier (new) 127

8683H GCSE Panjabi: Higher tier (new) 127

8688F GCSE Polish: Foundation tier (new) 129

8688H GCSE Polish: Higher tier (new) 129

8698F GCSE Spanish: Foundation tier 135

8698H GCSE Spanish: Higher tier 135

8700 GCSE English Language 118

8702 GCSE English Literature 119

8852 GCSE Engineering (new) 117

8956 FCSE Short French Short Course in Spoken Language 26

8957 FCSE Short French Short Course in Written Language 26

8958 FCSE French 26

8966 FCSE Short German Short Course in Spoken Language 27

8967 FCSE Short German Short Course in Written Language 27

8968 FCSE German 27

8971 FCSE Short Chinese (Mandarin) Short Course in Spoken Language 26

8972 FCSE Short Chinese (Mandarin) Short Course in Written Language 26

8973 FCSE Chinese (Mandarin) 26

8996 FCSE Short Spanish Short Course in Spoken Language 27

8997 FCSE Short Spanish Short Course in Written Language 27

8998 FCSE Spanish 27

9000 Bacc Baccalaureate: Overall Baccalaureate 14

9001 Bacc Baccalaureate: Enrichment Scheme 14

9361 GCE Use of Mathematics (Restricted Pilot): Advanced Subsidiary Award 103

9362 GCE Use of Mathematics (Restricted Pilot): Advanced Award 103

9993 FSMQ Data Analysis (Restricted Pilot) 28, 103

9994 FSMQ Hypothesis Testing (Restricted Pilot) 28, 103

9995 FSMQ Dynamics (Restricted Pilot) 28, 103

9996 FSMQ Maths Principles for Personal Finance (Restricted Pilot) 28, 103

9997 FSMQ Decision Mathematics (Restricted Pilot) 28, 103

9998 FSMQ Calculus (Restricted Pilot) 28, 103

ABS1 AQA Certificate Applied Business: Unit 1 15

ABS2 AQA Certificate Applied Business: Unit 2 15

ABS3 AQA Certificate Applied Business: Unit 3 15

ABS4 AQA Certificate Applied Business: Unit 4 15

ABS5 AQA Certificate Applied Business: Unit 5 15

ABS6 AQA Certificate Applied Business: Unit 6 15

Entry codes 2018/19 - Index

169

Entry code Qualification Entry description

ABS7 AQA Certificate Applied Business: Unit 7 15

ABS8 AQA Certificate Applied Business: Unit 8 15

ACCN1 GCE Accounting: Unit 1 32

ACCN2 GCE Accounting: Unit 2 32

ACCN3 GCE Accounting: Unit 3 32

ACCN4 GCE Accounting: Unit 4 32

ANTH1 GCE Anthropology: Unit 1 33

ANTH2 GCE Anthropology: Unit 2 33

ANTH3 GCE Anthropology: Unit 3 33

ANTH4 GCE Anthropology: Unit 4 33

ARCH1 GCE Archaeology: Unit 1 34

ARCH2 GCE Archaeology: Unit 2 34

ARCH3 GCE Archaeology: Unit 3 34

ARCH4 GCE Archaeology: Unit 4 34

ASC1 AQA Certificate Applied Science: Unit 1 16

ASC2 AQA Certificate Applied Science: Unit 2 16

ASC3 AQA Certificate Applied Science: Unit 3 16

ASC4 AQA Certificate Applied Science: Unit 4 16

ASC5 AQA Certificate Applied Science: Unit 5 16

ASC6A AQA Certificate Applied Science: Unit 6A 16

ASC6B AQA Certificate Applied Science: Unit 6B 16

ASC6C AQA Certificate Applied Science: Unit 6C 16

BENG1 GCE Bengali: Unit 1 41

BENG2 GCE Bengali: Unit 2 41

CIST1 GCE Citizenship Studies: Unit 1 45

CIST2 GCE Citizenship Studies: Unit 2 45

CIST3 GCE Citizenship Studies: Unit 3 45

CIST4 GCE Citizenship Studies: Unit 4 45

CIV1A GCE Classical Civilisation: Unit 1 Option A 46

CIV1B GCE Classical Civilisation: Unit 1 Option B 46

CIV1C GCE Classical Civilisation: Unit 1 Option C 46

CIV1D GCE Classical Civilisation: Unit 1 Option D 46

CIV1E GCE Classical Civilisation: Unit 1 Option E 46

CIV1F GCE Classical Civilisation: Unit 1 Option F 46

CIV2A GCE Classical Civilisation: Unit 2 Option A 46

CIV2B GCE Classical Civilisation: Unit 2 Option B 46

CIV2C GCE Classical Civilisation: Unit 2 Option C 46

CIV2D GCE Classical Civilisation: Unit 2 Option D 46

CIV2E GCE Classical Civilisation: Unit 2 Option E 46

Entry codes 2018/19 - Index

170

Entry code Qualification Entry description

CIV2F GCE Classical Civilisation: Unit 2 Option F 46

CIV3A GCE Classical Civilisation: Unit 3 Option A 46

CIV3B GCE Classical Civilisation: Unit 3 Option B 46

CIV3C GCE Classical Civilisation: Unit 3 Option C 46

CIV3D GCE Classical Civilisation: Unit 3 Option D 46

CIV4A GCE Classical Civilisation: Unit 4 Option A 46

CIV4B GCE Classical Civilisation: Unit 4 Option B 46

CIV4C GCE Classical Civilisation: Unit 4 Option C 46

CIV4D GCE Classical Civilisation: Unit 4 Option D 46

CLD1 AQA L1/2 Award Children’s Learning and Development: Unit 1 19

CLD2 AQA L1/2 Award Children’s Learning and Development: Unit 2 19

CLD3 AQA L1/2 Award Children’s Learning and Development: Unit 3 19

COMM1 GCE Communication and Culture: Unit 1 47

COMM2 GCE Communication and Culture: Unit 2 47

COMM3 GCE Communication and Culture: Unit 3 47

COMM4 GCE Communication and Culture: Unit 4 47

CREW1 GCE Creative Writing: Unit 1 50

CREW2 GCE Creative Writing: Unit 2 50

CREW3 GCE Creative Writing: Unit 3 50

CREW4 GCE Creative Writing: Unit 4 50

ELEC1 GCE Electronics: Unit 1 60

ELEC2 GCE Electronics: Unit 2 60

ELEC3 GCE Electronics: Unit 3 60

ELEC4 GCE Electronics: Unit 4 60

ELEC5 GCE Electronics: Unit 5 60

ELEC6 GCE Electronics: Unit 6 60

ENVS1 GCE Environmental Studies: Unit 1 65

ENVS2 GCE Environmental Studies: Unit 2 65

ENVS3 GCE Environmental Studies: Unit 3 65

ENVS4 GCE Environmental Studies: Unit 4 65

FDC1 AQA L1/2 Award Food and Catering: Unit 1 20

FDC2 AQA L1/2 Award Food and Catering: Unit 2 20

FDC3 AQA L1/2 Award Food and Catering: Unit 3 20

FNT1 AQA L1/2 Award Fashion and Textiles: Unit 1 19

FNT2 AQA L1/2 Award Fashion and Textiles: Unit 2 19

FNT3 AQA L1/2 Award Fashion and Textiles: Unit 3 19

FOOD1 GCE Design and Technology: Food Technology: Unit 1 53

FOOD2 GCE Design and Technology: Food Technology: Unit 2 53

FOOD3 GCE Design and Technology: Food Technology: Unit 3 53

Entry codes 2018/19 - Index

171

Entry code Qualification Entry description

FOOD4 GCE Design and Technology: Food Technology: Unit 4 53

GENA1 GCE General Studies A: Unit 1 68

GENA2 GCE General Studies A: Unit 2 68

GENA3 GCE General Studies A: Unit 3 68

GENA4 GCE General Studies A: Unit 4 68

GENB1 GCE General Studies B: Unit 1 69

GENB2 GCE General Studies B: Unit 2 69

GENB3 GCE General Studies B: Unit 3 69

GENB4 GCE General Studies B: Unit 4 69

GOV3A GCE Government and Politics: Unit 3A 72

GOV3B GCE Government and Politics: Unit 3B 72

GOV4A GCE Government and Politics: Unit 4A 72

GOV4B GCE Government and Politics: Unit 4B 72

GOVP1 GCE Government and Politics: Unit 1 72

GOVP2 GCE Government and Politics: Unit 2 72

HART1 GCE History of Art: Unit 1 78

HART2 GCE History of Art: Unit 2 78

HART3 GCE History of Art: Unit 3 78

HART4 GCE History of Art: Unit 4 78

HLT1 AQA L1/2 Award Health and Social Care: Unit 1 20

HLT2 AQA L1/2 Award Health and Social Care: Unit 2 20

HLT3 AQA L1/2 Award Health and Social Care: Unit 3 20

HSC01 GCE Health and Social Care Unit 1 73

HSC02 GCE Health and Social Care Unit 2 73

HSC03 GCE Health and Social Care Unit 3 73

HSC04 GCE Health and Social Care Unit 4 73

HSC05 GCE Health and Social Care Unit 5 73

HSC06 GCE Health and Social Care Unit 6 73

HSC07 GCE Health and Social Care Unit 7 73

HSC08 GCE Health and Social Care Unit 8 73

HSC09 GCE Health and Social Care Unit 9 73

HSC10 GCE Health and Social Care Unit 10 73

INF1 AQA L1/2 Award Information Technology: Unit 1 21

INF2 AQA L1/2 Award Information Technology: Unit 2 21

INF3 AQA L1/2 Award Information Technology: Unit 3 21

INFO1 GCE Information and Communication Technology: Unit 1 79

INFO2 GCE Information and Communication Technology: Unit 2 79

INFO3 GCE Information and Communication Technology: Unit 3 79

INFO4 GCE Information and Communication Technology: Unit 4 79

Entry codes 2018/19 - Index

172

Entry code Qualification Entry description

LAW01 GCE Law: Unit 1 80

LAW02 GCE Law: Unit 2 80

LAW03 GCE Law: Unit 3 80

LAW04 GCE Law: Unit 4 80

MAT1 AQA L1/2 Award Materials Technology: Unit 1 21

MAT2 AQA L1/2 Award Materials Technology: Unit 2 21

MAT3 AQA L1/2 Award Materials Technology: Unit 3 21

MD01 GCE Mathematics: Unit MD01 82

MD02 GCE Mathematics: Unit MD02 82

MEST1 GCE Media Studies: Unit 1 87

MEST2 GCE Media Studies: Unit 2 87

MEST3 GCE Media Studies: Unit 3 87

MEST4 GCE Media Studies: Unit 4 87

MFP1 GCE Mathematics: Unit MFP1 82

MFP2 GCE Mathematics: Unit MFP2 82

MFP3 GCE Mathematics: Unit MFP3 82

MFP4 GCE Mathematics: Unit MFP4 82

MHEB1 GCE Modern Hebrew: Unit 1 89

MHEB2 GCE Modern Hebrew: Unit 2 89

MM03 GCE Mathematics: Unit MM03 82

MM04 GCE Mathematics: Unit MM04 82

MM05 GCE Mathematics: Unit MM05 82

MM1B GCE Mathematics: Unit MM1B 82

MM2B GCE Mathematics: Unit MM2B 82

MPC1 GCE Mathematics: Unit MPC1 82

MPC2 GCE Mathematics: Unit MPC2 82

MPC3 GCE Mathematics: Unit MPC3 82

MPC4 GCE Mathematics: Unit MPC4 82

MS03 GCE Mathematics: Unit MS03 82

MS04 GCE Mathematics: Unit MS04 82

MS1A GCE Mathematics: Unit MS1A 82

MS1B GCE Mathematics: Unit MS1B 82

MS2B GCE Mathematics: Unit MS2B 82

PANJ1 GCE Panjabi: Unit 1 91

PANJ2 GCE Panjabi: Unit 2 91

PER1 Tech Award Performing Arts: Unit 1 154

PER2 Tech Award Performing Arts: Unit 2 154

PER3 Tech Award Performing Arts: Unit 3 154

PHLS1 GCE Philosophy: Unit 1 92

Entry codes 2018/19 - Index

173

Entry code Qualification Entry description

PHLS2 GCE Philosophy: Unit 2 92

PLSH1 GCE Polish: Unit 1 96

PLSH2 GCE Polish: Unit 2 96

PROD1 GCE Design and Technology: Product Design (3-D Design): Unit 1 54

PROD2 GCE Design and Technology: Product Design (3-D Design): Unit 2 54

PROD3 GCE Design and Technology: Product Design (3-D Design): Unit 3 54

PROD4 GCE Design and Technology: Product Design (3-D Design): Unit 4 54

SPT1 AQA L1/2 Award Sport: Unit 1 22

SPT2 AQA L1/2 Award Sport: Unit 2 22

SPT3 AQA L1/2 Award Sport: Unit 3 22

SS02 GCE Statistics: Unit 2 102

SS03 GCE Statistics: Unit 3 102

SS04 GCE Statistics: Unit 4 102

SS05 GCE Statistics: Unit 5 102

SS06 GCE Statistics: Unit 6 102

SS1A GCE Statistics: Unit 1A 102

SS1B GCE Statistics: Unit 1B 102

STM1 AQA L1/2 Award STEM: Unit 1 22

STM2 AQA L1/2 Award STEM: Unit 2 22

STM3 AQA L1/2 Award STEM: Unit 3 22

SYST1 GCE Design and Technology: Systems and Control Technology: Unit 1 57

SYST2 GCE Design and Technology: Systems and Control Technology: Unit 2 57

SYST3 GCE Design and Technology: Systems and Control Technology: Unit 3 57

SYST4 GCE Design and Technology: Systems and Control Technology: Unit 4 57

TEXT1 GCE Design and Technology: Product Design (Textiles): Unit 1 55

TEXT2 GCE Design and Technology: Product Design (Textiles): Unit 2 55

TEXT3 GCE Design and Technology: Product Design (Textiles): Unit 3 55

TEXT4 GCE Design and Technology: Product Design (Textiles): Unit 4 55

TVQ01009 Tech-level IT: Cyber Security and Security Administration 148

TVQ01010 Tech-level IT: Cyber Security (Foundation) 147

TVQ01011 Tech-level IT: Networking 149

TVQ01012 Tech-level IT: User Support 153

TVQ01013 Tech-level IT: Programming 150

TVQ01014 Tech-level IT: Technical Support (Foundation) 152

TVQ01015 Tech-level IT: Scripting and App Programming (Foundation) 151

TVQ01016 Tech-level Engineering: Mechatronic Engineering 142

TVQ01018 Tech-level Engineering: Design Engineering 141

TVQ01019 Tech-level Engineering (Foundation) 140

TVQ01020 Tech-level Business: Marketing 138

Entry codes 2018/19 - Index

174

Entry code Qualification Entry description

TVQ01021 Tech-level Business: Marketing Communications (Foundation) 139

TVQ01022 Tech-level Entertainment Technology: Video Games Art and Mechanics (Foundation) 146

TVQ01023 Tech-level Entertainment Technology: Video Games Art and Animation 143

TVQ01024 Tech-level Entertainment Technology: Video Games Art and Design 144

TVQ01025 Tech-level Entertainment Technology: Video Games Art and Design Production 145

USE1 GCE Use of Mathematics (Restricted Pilot): Algebra 103

USE2 GCE Use of Mathematics (Restricted Pilot): Mathematical Applications 103

USE3 GCE Use of Mathematics (Restricted Pilot): Mathematical Comprehension 103

VIS1 AQA L1/2 Award Visual Communication: Unit 1 23

VIS2 AQA L1/2 Award Visual Communication: Unit 2 23

VIS3 AQA L1/2 Award Visual Communication: Unit 3 23

aqa.org.uk

Copyright © AQA and its licensors. All rights reserved. AQA Education (AQA) is a registered charity (registered charity number 1073334) and a company limited by guarantee registered in England and Wales (company number 3644723). Registered address: AQA, Devas Street, Manchester M15 6EX.

November 2018 G02018a

Entry codes 2018/19All exam series

This document lists the entry codes for all series in the 2018/19 academic year. Any updates will be posted on the Exams administration/Entries page of our website aqa.org.uk

Issued November 2018 v1.1

Entry codes 2018/19