Equipment Operation & Maintenance - Schaedler … · Equipment Operation & Maintenance ... LV, MV Flow meters, etc. from Siemens. Also integration to ... WL COM16 COM16 - Basic WFC,

Equipment Operation & Maintenance

Many Facilities have:Very complex distribution systems.Very complex distribution systems.Many inter-locked backup power systems.

Maintaining and troubleshooting the complex distribution system g g p yrequires timely information from many critical points.

Copyright – Siemens Industry Inc.Dan Laurent Siemens Industry Inc. / LMV DivisionJune 2010Page 11

Equipment Operation & Maintenance

Alarming of critical points in the distribution systemPower monitoring systems have to handle alarming well:

q p p

Capture breaker operationsProvide real time alarms of UPS equipmentMonitor generator control operations Capture power quality events [sags, swells & transients] at critical points in the facility, such as incoming service, generator service and UPS output

All to 1msec in order to accomplish good root-cause analysis of issues affecting the facility –also called sequence-of-event recording or SER.


Availability / Quality of SupplyAvailability / Quality of Supply

Improve Reliability• Detect voltage disturbances before they occur or while theybefore they occur or while they are occurring!• Automatic source transfer• Load preservation schemes• Load preservation schemes

Ensure Power Quality • Detect problems early• Diagnose harmonics problems• Fault diagnostics• Trouble-shooting help


Additional External Downtime - SavingsAdditional External Downtime - Savings

Al / E il / P ANYAlarm / Email / Page on ANYabnormal condition including:

•Single Phasing•Single Phasing

•Generator Oil Pressure

•Steam Pressure

•Bearing Temperature

•Water Flow Rate

•Transformer Temperature

•Motor Overload / Underload

Any analog or discrete input


Any analog or discrete input

Monitor other Critical Equipment and PointsMonitor all critical equipment in the facility

Power monitoring systems have to handle third party communications well:

Monitor other Critical Equipment and Points

Communicate with many third-party critical pieces of electrical equipment such as UPS’s, generators, PDU’s, ATS’s, etc.Access data from hundreds of field devices and thousands of points.

Challenge for the power monitoring system:Seamless monitoring system blending critical event and historical


Seamless monitoring system blending critical event and historical data from high-speed points and waveform captures to critical equipment alarms.

What Does Siemens Have To Offer?What Does Siemens Have To Offer?

A Totally Integrated P M tPower Management System...

Advanced Metering Devices, Relays, Breakers, Drives, LV, MV Flow meters, etc. from Siemens. Also integration to third party devices, other control systems other data bases and othersystems, other data bases and other utilities (gas/water/steam/air).

And, Siemens provides Power M it i t t dit d i d


Stand-Alone or SCADA Power Monitoring & Control Software packages tailored to a companies specific requirements.

Monitoring experts to audit, design and implement a completely Intergraded Power Management solution.

Siemens Advanced Metering Portfolio

Modbus Master, Custom Web Pages, Data Concentrator & Central

9610

res 9510 (RTU)

High Speed Transient Detection, Extensive I/O,Advanced PQ / 1024 samples

The entire line of Siemens Energy Medium Voltage products can also be brought in and metered via Modbus.

Display (RTU) / 256 samples /cycle

Feat

ur 9360WFC-Sag/Swell detection, Web Pages,expanded logging, Email Alarming / 128 samples

WL COM16COM16 - Basic WFC, Breaker status, Alarms,L i I/O M db RTU b i t i

Energy Logging, Custom Screens, Logic,

Alarming, Built-in Ethernet, optional Profibus DP & Modbus RTU Expanded 2 Dig In and 2 Dig

PAC-4200

9340Web Pages, Logic, I/O, Email Alarming

Logging, I/O, Modbus RTU, basic metering.

& Modbus RTU, Expanded 2 Dig In and 2 Dig Outputs, logging, PAC-3200

50+ Metering measurements, 1 dig In & 1 out, Built-in Ethernet, Profibus DP, Modbus RTU, One & Two piece (Tran) designs

30+ Metering measurements 2 dig In and 2 Dig Outputs 1 kWh &

PAC-310030+ Metering measurements, 2 dig In and 2 Dig Outputs, 1 kWh & kVARh register, Built-in Modbus Serial communications.VL COM11

Amperage Metering (Min/Max/Avg) measurements, status readings, Built-in Modbus Serial communications with COM11.


Embedded P-Series / Switchgear / Switchboards, etc., & External Metering

PerformanceReal-time kW, kWh, Amps, Volts, Alarming, PAC(SMU) via serial, Ethernet, or wirelessEmbedded & External

Metering

Solutions for pulling everything togetherSolutions for pulling everything together

The options are endless and Siemens manufactures or partners with companies id d i f i i i W h ll!to provided an extensive array of communication options. We use them all!

Hardwire (RS-485) Solution Ethernet (Copper / Fiber ) Solutions

Direct RS-485 shielded twisted pair wire. Runs up to 4000ft. Thirty-two

Direct Siemens Meter or External I/O for copper /fiber

(32) devices per run. connectivity.

Siemens Scalance Wireless Ethernet Solutions

Scalance Indoor & Outdoor


Scalance Indoor & Outdoor

Encrypted VLAN over public network, AES Encryption

Commonly Integrated Third Party Devices / SystemsCommonly Integrated Third Party Devices / Systems

Other Utilities – water, air, gas and Steam.

Key components outside the normal Siemens offering

Competitors devices GE, Square D, Eaton and more!Real-time metering, alarms and status information

Siemens offering can be pulled into the solution! Square D CM-4000

Meter

Paralleling Gear – Generators, Cummins, Detroit Diesel, CAT, ASCO..Real-time metering, alarms and status information

UPS/PDU/RPP/ STS/ Transfer Switches / Battery SystemsUPS/PDU/RPP/ STS/ Transfer Switches / Battery Systems

Real-time metering alarms and status informationfrom Liebert, MGE, Powerware, all the key manufactures.


Building Automation Systems – Siemens Apogee, Tran, Johnson Controls and more!Metering, alarms and status information

Siemens WinPM Net Power Monitoring Software

Linked to hardware it performs the Logic to process critical information for:Sequence of Event Recording

Siemens WinPM.Net Power Monitoring Software

gAdvanced ReportsAnimationsEvent LogsAlarmsAlarmsTasks

Copyright – Siemens Industry Inc.Dan Laurent Siemens Industry Inc. / LMV Division

Documents

Equipment Operation & Maintenance - Schaedler … · Equipment Operation & Maintenance ... LV, MV Flow meters, etc. from Siemens. Also integration to ... WL COM16 COM16 - Basic WFC,