49
ROOFING 1.00 - ROOFING using Corr. G.I. Did you use corr. G.I. sheet? Input 1 if True & Leave it blank if False ? : 1.00 Roofing Area ? : 180.00 Eff. Area of Single G.I. Corrugated Sheet for Top Roof ? : 2.00 Total Length of Ridge ? : 25.00 Effective Length of Single Ridge Roll ? : 2.10 Total Length of Valley ? : 8.00 Effective Length of Single Valley Roll ? : 2.10 Total Length of Flashing ? : - Effective Length of Single Flashing Sheet ? : 2.10 Total Length of Fascia Board ? : 60.00 Effective Length of Single Fascia Board ? : 2.10 Total Length of Gutter ? : 34.00 Effective Length of Single Gutter : 2.25 ROOFING using Contrex Roof Tiles Roofing Area ? : - Down End Length ? : 12.00 Ridge Length ? : 6.00 Left End Barge Length? : 2.40 Right Hand Barge Length? : 2.40 Effective Length of Single Down End Tiles ? : 0.30 Effective Length of Single Ridge Tiles ? : 0.29 Effective length of Single Left Hand Barge ? : 0.28 Effective length of Single Rigth Hand Barge ? : 0.30 Valley Gutter Length ? : - Effective Length of Single Valley Gutter ? : 2.35 Total Flashing Length ? : 4.80 Effective Length of Single Flashing Sheet ? : 2.35 Total Length of Fascia Board ? : 12.00 Effective Length of Single Fascia Board ? : 2.35 Effective G.I. Roofing Sheet for Undersheeting ? : 2.50 Spacing of Vertical Battens ? : 0.60 Spacing of Horizontal Batten ? : 0.50 Eff. Area of Single Flat Tiles ? : 0.09 Eff. Area of Single Down End ? : 0.09 Eff. Area of Single Rigth Hand Barge ? : 0.09 Eff. Area of Single Left Hand Barge ? : 0.09 ROOFING using Asphalt Shingles Roofing Area ? : 60.00 Area of Asphalt Filler ? : 60.00 Effective Area of Single Asphalt Shingles ? : 0.40 PARTITION Input 1 if you use Ficem Board or leave it Blank if not ? : Input 1 if you use Gypsum Board or Leave it Blank if not ? : Ficem Board Wall Area ? : Gypsum Board Wall Area ? : Spacing of Vertical Metal Studs ? : Spacing of Horizontal Metal Studs ? ; CEILING Input 1 if you use Ficem Board or leave it Blank if not ? : 1.00 Input 1 if you use Gypsum Board or Leave it Blank if not ? : - Interior Ficem Board Ceiling Area ? : 127.00 Exterior Ficem Board Ceiling Area ? : Interior Gypsum Board Ceiling Area ? : Exterior Gypsum Board Ceiling Area ? : Spacing of Carrying Channel ? : 1.20 Input 1 if you use G.I. Sheet as Top Roof or Leaved it Blank if not ? : Input 1 if you use Roof Tiles or Leaved it Blank if not ? : Input 1 if you use Asphalt Shingles or Leaved it Blank if not ? :

Estimate Fence

  • Upload
    msonnn

  • View
    245

  • Download
    2

Embed Size (px)

DESCRIPTION

estimate fence

Citation preview

0000House Model :VICENZALocation :Gardens of Maia AltaFLOOR AREA :90.00sq.m.Item CodeItem of WorksInput QuantityDescriptionQty.unit11SITE PREP. RESTORATIONLumber to Be Use in Staking (Choose One Only Between The Two) :Coco Lumber0.0bd.ft.1.) Input 1 if you use Good Lumber; leave it Blank if not ? :1.00Good Lumber243.00bd.ft.2.) Input 1 if you use Coco Lumber; leave it Blank if not ? :0.0CWN use in Staking :CWN No. 20.90kg.Input 1 if CWN No.1; leave it Blank if not ? :1.00CWN No. 30.90kg.Input 1 if CWN No.2 ; leave it Blank if not ? :1.00Nylon String50.60ln.m.Input 1 if CWN No.3 ; leave it Blank if not ? :1.00Soil treatment chem.1.20li.Lot Perimeter with 1 meter offsetting ? :44.00Excess/barrow0.40cu.m.Floor Area ? :120.00Gravel G16.00cu.m.Excavation ? :1.20Thickness of Gravel Bedding ? :0.0521.1WALL FOOTINGSIs Wall Included? Input 1 if True & Leave it blank if False ? :1.00Input 1 if you use lumber; leave it Blank if not ? :Volume of Excavation :23.76cu.mInput 1 if you use plywood; leave it Blank if not ? :Gravel G1 for Bedding :0.99cu.mInput 1 if CWN No.1; leave it Blank if not ? :No. of 10mm Dia. for Ties :11.08pcs.Input 1 if CWN No.2 ; leave it Blank if not ? :No. of 10mm Dia. RSB :0.0pcs.Input 1 if CWN No.3 ; leave it Blank if not ? :No. of 12mm Dia. RSB :22.00pcs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :No. of 16mm Dia. RSB :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Portland Cement :29.70bagsInput 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Gravel G1 for Concrete :3.96cu.mFoundation Perimeter ? :44.00Sand :1.98cu.mWidth of Footings ? :0.45Tie Wire :11.88kgs.Length of Footings ? :44.00Volume of Concrete :3.96cu.mThickness of Footings ? :0.20Height of Excavation ? :1.20Spacing of Lateral Ties ? :0.30No. of Longitudinal Bars ? :3.00Thickness of Gravel Bedding ? :0.0521.2COLUMN FOOTINGSInput 1 for Column Footing1; Leave it Blank if neg ? :1.00Volume of Excavation :18.00cu.mInput 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Volume of Gravel Bedding :0.75cu.mInput 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0No. 12mm dia. RSB :36.25pcs.Width of Footings ? :1.00No. 16mm dia. RSB :0.0pcs.Length of Footings ? :1.00Portland Cemant :33.75bagsThickness of Footings ? :0.30Gravel :4.50cu.mHeight of Excavation ? :1.20Sand :2.25cu.mSpacing of Rebars Longitudinal ? :0.16Tie Wire :13.50kgs.Spacing of Rebars Lateral ? :0.16Volume Concrete:4.50cu.mThickness of Gravel Bedding ? :0.05No. of Column Footing1 ? :15.00Input 1 for Column Footing2; Leave it Blank if neg ? :Volume of Excavation :0.0cu.m.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Volume of Gravel Bedding :0.0cu.m.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00No. 12mm dia. RSB :0.0pcs.Width of Footings ? :No. 16mm dia. RSB :0.0pcs.Length of Footings ? :Portland Cemant :0.0bagsThickness of Footings ? :Gravel :0.0cu.m.Height of Excavation ? :Sand :0.0cu.m.Spacing of Rebars Longitudinal ? :0.25Tie Wire :0.0kgs.Spacing of Rebars Lateral ? :0.25Volume Concrete :0.0cu.m.Thickness of Gravel Bedding ? :No. of Column Footing2 ? :Input 1 for Column Footing3; Leave it Blank if neg ? :Volume of Excavation :0.0cu.m.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Volume of Gravel Bedding :0.0cu.m.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :No. 12mm dia. RSB :0.0pcs.Width of Footings ? :No. 16mm dia. RSB :0.0pcs.Length of Footings ? :Portland Cemant :0.0bagsThickness of Footings ? :Gravel :0.0cu.m.Height of Excavation ? :Sand :0.0cu.m.Spacing of Rebars Longitudinal ? :0.25Tie Wire :0.0kgs.Spacing of Rebars Lateral ? :0.25Volume Concrete :0.0cu.m.Thickness of Gravel Bedding ? :No. of Column Footing3 ? :Input 1 for Column Footing4; Leave it Blank if neg ? :Volume of Excavation :0.0cu.m.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Volume of Gravel Bedding :0.0cu.m.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :No. 12mm dia. RSB :0.0pcs.Width of Footings ? :No. 16mm dia. RSB :0.0pcs.Length of Footings ? :Portland Cemant :0.0bagsThickness of Footings ? :Gravel :0.0cu.m.Height of Excavation ? :Sand :0.0cu.m.Spacing of Rebars Longitudinal ? :0.25Tie Wire :0.0kgs.Spacing of Rebars Lateral ? :0.25Volume Concrete :0.0cu.m.Thickness of Gravel Bedding ? :No. of Column Footing4 ? :22COLUMNSInput 1 for Column1; Leave it Blank if neg ? :1.00No. of 16mm dia. RSB :20.00pcs.Length of Column ? :0.25No. of 12mm dia. RSB :0.0pcs.Width of Column ? :0.25No. of 10mm dia. RSB :0.0pcs.Height of Column ? :2.50No. of 10mm dia. for Ties :27.00pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Portland Cement :16.88bagsInput 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Gravel :1.88cu.m.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Sand :0.94cu.m.Spacing of Lateral Ties ? :0.20Tie Wire :5.63kgs.No. of RSB ? :4.00Volume of Concrete :1.88cu.m.No. of Column 1 ? :12.002"x2"x10' Lumber :66.91bd.ft.Form ply :11.10pcs.CWN No. 1 :1.11kgs.CWN No. 2 :1.34kgs.CWN No. 3 :1.67kgs.Input 1 for Column2; Leave it Blank if neg ? :No. of 16mm dia. RSB :0.0pcs.Length of Column ? :No. of 12mm dia. RSB :0.0pcs.Width of Column ? :No. of 10mm dia. RSB :0.0pcs.Height of Column ? :No. of 10mm dia. for Ties :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Portland Cement :0.0bagsInput 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Gravel :0.0cu.m.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Sand :0.0cu.m.Spacing of Lateral Ties ? :0.20Tie Wire :0.0kgs.No. of RSB ? :Volume of Concrete :0.0cu.m.No. of Column 2 ? :2"x2"x10' Lumber :0.0bd.ft.Form ply :0.0pcs.CWN No. 1 :0.0kgs.CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.Input 1 for Column3; Leave it Blank if neg ? :No. of 16mm dia. RSB :0.0pcs.Length of Column ? :No. of 12mm dia. RSB :0.0pcs.Width of Column ? :No. of 10mm dia. RSB :0.0pcs.Height of Column ? :No. of 10mm dia. for Ties :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Portland Cement :0.0bagsInput 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Gravel :0.0cu.m.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Sand :0.0cu.m.Spacing of Lateral Ties ? :0.20Tie Wire :0.0kgs.No. of RSB ? :Volume of Concrete :0.0cu.m.No. of Column 3 ? :2"x2"x10' Lumber :0.0bd.ft.Form ply :0.0pcs.CWN No. 1 :0.0kgs.CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.Input 1 for Column4; Leave it Blank if neg ? :No. of 16mm dia. RSB :0.0pcs.Length of Column ? :No. of 12mm dia. RSB :0.0pcs.Width of Column ? :No. of 10mm dia. RSB :0.0pcs.Height of Column ? :No. of 10mm dia. for Ties :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Portland Cement :0.0bagsInput 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Gravel :0.0cu.m.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Sand :0.0cu.m.Spacing of Lateral Ties ? :0.20Tie Wire :0.0kgs.No. of RSB ? :Volume of Concrete :0.0cu.m.No. of Column 4 ? :2"x2"x10' Lumber :0.0bd.ft.Form ply :0.0pcs.CWN No. 1 :0.0kgs.CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.23BEAMSInput 1 for Beam1; Leave it Blank if neg ? :1.00No. of 16mm dia. RSB :20.67pcs.15Length of Beam ? :31.00No. of 12mm dia. RSB :0.0pcs.Width of Beam ? :0.20No. of 10mm dia. RSB :0.0pcs.Depth of Beam ? :0.30No. 10mm dia. Stirrups :26.00pcs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Portland Cement :16.74bagsInput 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Gravel 3/4" :1.86cu.m.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Sand :0.93cu.m.No. of RSB ? :4.00Tie Wire :5.58kgs.Spacing of Stirrups ? :0.20Volume of Concrete :1.86cu.m.No. of Beam 1? :1.002"x2"x10' Lumber :56.94bd.ft.Form ply :11.47pcs.CWN No. 1 :1.15kgs.CWN No. 2 :5.69kgs.CWN No. 3 :5.69kgs.Input 1 for Beam2; Leave it Blank if neg ? :0.0No. of 16mm dia. RSB :0.0pcs.Length of Beam ? :14.50No. of 12mm dia. RSB :0.0pcs.Width of Beam ? :0.15No. of 10mm dia. RSB :0.0pcs.Depth of Beam ? :0.40No. 10mm dia. Stirrups :0.0pcs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Portland Cement :0.0bagsInput 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Gravel 3/4" :0.0cu.m.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Sand :0.0cu.m.No. of RSB ? :5.00Tie Wire :0.0kgs.Spacing of Stirrups ? :0.20Volume of Concrete :0.0cu.m.No. of Beam 2 ? :1.002"x2"x10' Lumber :0.0bd.ft.Form ply :0.0pcs.CWN No. 1 :0.0kgs.CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.Input 1 for Beam3; Leave it Blank if neg ? :0.0No. of 16mm dia. RSB :0.0pcs.Length of Beam ? :1.00No. of 12mm dia. RSB :0.0pcs.Width of Beam ? :0.15No. of 10mm dia. RSB :0.0pcs.Depth of Beam ? :0.40No. 10mm dia. Stirrups :0.0pcs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Portland Cement :0.0bagsInput 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Gravel 3/4" :0.0cu.m.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Sand :0.0cu.m.No. of RSB ? :5.00Tie Wire :0.0kgs.Spacing of Stirrups ? :0.20Volume of Concrete :0.0cu.m.No. of Beam 3 ? :1.002"x2"x10' Lumber :0.0bd.ft.Form ply :0.0pcs.CWN No. 1 :0.0kgs.CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.Input 1 for Beam4; Leave it Blank if neg ? :No. of 16mm dia. RSB :0.0pcs.Length of Beam ? :No. of 12mm dia. RSB :0.0pcs.Width of Beam ? :No. of 10mm dia. RSB :0.0pcs.Depth of Beam ? :No. 10mm dia. Stirrups :0.0pcs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Portland Cement :0.0bagsInput 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Gravel 3/4" :0.0cu.m.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Sand :0.0cu.m.No. of RSB ? :Tie Wire :0.0kgs.Spacing of Stirrups ? :0.20Volume of Concrete :0.0cu.m.No. of Beam 4 ? :2"x2"x10' Lumber :0.0bd.ft.Form ply :0.0pcs.CWN No. 1 :0.0kgs.CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.24SUSPENDED SLABInput 1 for Slab4; Leave it Blank if neg ? :0.0Steeldeck :0.0sq.m.Width of Slab ? :4.00Volume of Concrete :0.0cu.m.Length of Slab ? :7.00No. of 10mm dia. RSB :0.0pcs.Thickness of Suspended Slab ? :0.10Tie Wire :0.0kgs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00No. of 12mm dia. RSB :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0No. of 16mm dia. RSB :0.0pcs.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Portland Cement :0.0bagsInput 1 if you use Steel Decking; Leave it Blank if not ? :1.00Gravel 3/4" :0.0cu.m.Spacing of Temperature Bars ? :0.30Sand :0.0cu.m.2"x2"x10' Lumber :0.0bd.ft.Spacing of Main Longitudinal Reinforcing Steel Bars ? :0.30Form ply :0.0pcs.Spacing of Main Traverse Reinforcing Steel Bars ? :0.30CWN No. 1 :0.0kgs.No. of Slab 4 ? :1.00CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.Input 1 for Slab4; Leave it Blank if neg ? :0.0Steeldeck :0.0sq.m.Width of Slab ? :3.00Volume of Concrete :0.0cu.m.Length of Slab ? :6.00No. of 10mm dia. RSB :0.0pcs.Thickness of Suspended Slab ? :0.10Tie Wire :0.0kgs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00No. of 12mm dia. RSB :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0No. of 16mm dia. RSB :0.0pcs.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Portland Cement :0.0bagsInput 1 if you use Steel Decking; Leave it Blank if not ? :1.00Gravel 3/4" :0.0cu.m.Spacing of Temperature Bars ? :0.30Sand :0.0cu.m.2"x2"x10' Lumber :0.0bd.ft.Spacing of Main Longitudinal Reinforcing Steel Bars ? :0.30Form ply :0.0pcs.Spacing of Main Traverse Reinforcing Steel Bars ? :0.30CWN No. 1 :0.0kgs.No. of Slab 4 ? :1.00CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.Input 1 for Slab4; Leave it Blank if neg ? :0.0Steeldeck :0.0sq.m.Width of Slab ? :0.50Volume of Concrete :0.0cu.m.Length of Slab ? :2.50No. of 10mm dia. RSB :0.0pcs.Thickness of Suspended Slab ? :0.10Tie Wire :0.0kgs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00No. of 12mm dia. RSB :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0No. of 16mm dia. RSB :0.0pcs.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Portland Cement :0.0bagsInput 1 if you use Steel Decking; Leave it Blank if not ? :1.00Gravel 3/4" :0.0cu.m.Spacing of Temperature Bars ? :0.30Sand :0.0cu.m.2"x2"x10' Lumber :0.0bd.ft.Spacing of Main Longitudinal Reinforcing Steel Bars ? :0.30Form ply :0.0pcs.Spacing of Main Traverse Reinforcing Steel Bars ? :0.30CWN No. 1 :0.0kgs.No. of Slab 4 ? :1.00CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.Input 1 for Slab4; Leave it Blank if neg ? :Steeldeck :0.0sq.m.Width of Slab ? :Volume of Concrete :0.0cu.m.Length of Slab ? :No. of 10mm dia. RSB :0.0pcs.Thickness of Suspended Slab ? :Tie Wire :0.0kgs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :No. of 12mm dia. RSB :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :No. of 16mm dia. RSB :0.0pcs.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Portland Cement :0.0bagsInput 1 if you use Steel Decking; Leave it Blank if not ? :Gravel 3/4" :0.0cu.m.Spacing of Temperature Bars ? :Sand :0.0cu.m.2"x2"x10' Lumber :0.0bd.ft.Spacing of Main Longitudinal Reinforcing Steel Bars ? :Form ply :0.0pcs.Spacing of Main Traverse Reinforcing Steel Bars ? :CWN No. 1 :0.0kgs.No. of Slab 4 ? :CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.Input 1 for Slab5; Leave it Blank if neg ? :Steeldeck :0.0sq.m.Width of Slab ? :Volume of Concrete :0.0cu.m.Length of Slab ? :No. of 10mm dia. RSB :0.0pcs.Thickness of Suspended Slab ? :Tie Wire :0.0kgs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :No. of 12mm dia. RSB :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :No. of 16mm dia. RSB :0.0pcs.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Portland Cement :0.0bagsInput 1 if you use Steel Decking; Leave it Blank if not ? :Gravel 3/4" :0.0cu.m.Spacing of Temperature Bars ? :Sand :0.0cu.m.2"x2"x10' Lumber :0.0bd.ft.Spacing of Main Longitudinal Reinforcing Steel Bars ? :Form ply :0.0pcs.Spacing of Main Traverse Reinforcing Steel Bars ? :CWN No. 1 :0.0kgs.No. of Slab 5 ? :CWN No. 2 :0.0kgs.CWN No. 3 :0.0kgs.3.3825SLAB ON FILLInput 1 for Slab on Fill 3; Leave it Blank if Neg ? :1.00No. of 10mm dia. Bars :0.0pcs.Width of Slab ? :3.50No. of 12mm dia. Bars :16.81pcs.Length of Slab ? :4.00Tie Wire :16.80kgs.Thickness of Slab on Fill ? :0.40Portland Cement :50.40bagsThickness of Gravel Bedding ? :0.05Gravel G1 for Concrete :5.60cu.m.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Sand :2.80cu.m.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Gravel G1 for Bedding :0.70cu.m.Spacing of Bars Both Ways ? :0.30Volume of Concerete :5.60cu.m.No. of Slab 3 ? :1.00Input 1 for Slab on Fill 3; Leave it Blank if Neg ? :0.0No. of 10mm dia. Bars :0.0pcs.Width of Slab ? :0.50No. of 12mm dia. Bars :0.0pcs.Length of Slab ? :40.00Tie Wire :0.0kgs.Thickness of Slab on Fill ? :0.08Portland Cement :0.0bagsThickness of Gravel Bedding ? :0.0Gravel G1 for Concrete :0.0cu.m.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Sand :0.0cu.m.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Gravel G1 for Bedding :0.0cu.m.Spacing of Bars Both Ways ? :0.30Volume of Concerete :0.0cu.m.No. of Slab 3 ? :1.00Input 1 for Slab on Fill 3; Leave it Blank if Neg ? :0.0No. of 10mm dia. Bars :0.0pcs.Width of Slab ? :2.50No. of 12mm dia. Bars :0.0pcs.Length of Slab ? :3.00Tie Wire :0.0kgs.Thickness of Slab on Fill ? :0.10Portland Cement :0.0bagsThickness of Gravel Bedding ? :0.05Gravel G1 for Concrete :0.0cu.m.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Sand :0.0cu.m.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Gravel G1 for Bedding :0.0cu.m.Spacing of Bars Both Ways ? :0.40Volume of Concerete :0.0cu.m.No. of Slab 3 ? :1.00Input 1 for Slab on Fill 4; Leave it Blank if Neg ? :No. of 10mm dia. Bars :0.0pcs.Width of Slab ? :No. of 12mm dia. Bars :0.0pcs.Length of Slab ? :Tie Wire :0.0kgs.Thickness of Slab on Fill ? :Portland Cement :0.0bagsThickness of Gravel Bedding ? :Gravel G1 for Concrete :0.0cu.m.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Sand :0.0cu.m.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :Gravel G1 for Bedding :0.0cu.m.Spacing of Bars Both Ways ? :0.40Volume of Concerete :0.0cu.m.No. of Slab 4 ? :3.0026SERVICE ENTRANCEInput 1 for Slab on Fill 4; Leave it Blank if Neg ? :0.0No. of 10mm dia. Bars :0.0pcs.Width of Slab ? :3.00No. of 12mm dia. Bars :0.0pcs.Length of Slab ? :5.50Tie Wire :0.0kgs.Thickness of Slab on Fill ? :0.10Portland Cement :0.0bagsThickness of Gravel Bedding ? :0.10Gravel G1 for Concrete :0.0cu.m.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00Sand :0.0cu.m.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Gravel G1 for Bedding :0.0cu.m.Spacing of Bars Both Ways ? :0.40Volume of Concerete :0.0cu.m.No. of Service Entrance ? :1.0054.1STAIRSIs Stair Included? Input 1 if True & Leave it blank if False ? :0.0Width of Stairs ? :1.50Volume of Concrete :0.0cu.m.Length of Stairs ? :3.40No. of 10mm dia. RSB :0.0pcs.Average Thickness of Stair ? :0.10Tie Wire :0.0kgs.Input 1 if you use 10mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0No. of 12mm dia. RSB :0.0pcs.Input 1 if you use 12mm dia. For Longitudinal Bars ; Leave it Blank if not ? :1.00No. of 16mm dia. RSB :0.0pcs.Input 1 if you use 16mm dia. For Longitudinal Bars ; Leave it Blank if not ? :0.0Portland Cement :0.0bagsGravel 3/4" :0.0cu.m.Spacing of Temperature Bars ? :0.30Sand :0.0cu.m.Input 1 if your using Main Reinforcing Bars ; Leave it Blank if not ? :1.00Formply :0.0pcs.Spacing of Main Longitudinal Reinforcing Steel Bars ? :0.152"x2"x10' Lumber :0.0bd.ft.Spacing of Main Traverse Reinforcing Steel Bars ? :0.15CWN No. 1 :0.0kgs.No. of Stairs ? :1.00CWN No. 2 :0.0kgs.Riser Heigth ? :0.20CWN No. 3 :0.0kgs.Steps Width ? :0.25No. of Step ? :15.0031BATTERBOARDSBatter Board Area ? :0.0Good Lumber :0.0bd.ft.Concrete Nail :0.0kgs.32.16" CHBWall Area ? :70.00No. of CHB 6" :875.00pcs.Spacing of Vertical Bars ? :0.60No. 10mm dia. RSB :39.24pcs.15Spacing of Horizontal Bars ? :0.60Cement For Mortar & Filler :70.91bags.52.5Area to be Plastered ? :132.00Cement For Plastering :25.34bags.Sand for Plastering :2.11cu.m.Sand for Mortar & Filler :5.91cu.m.Tie Wires :3.50kgs.32.24" CHB0.0Wall Area ? :40.00No. of CHB 6" :500.00pcs.44.64Spacing of Vertical Bars ? :0.60No. 10mm dia. RSB :22.42pcs.Spacing of Horizontal Bars ? :0.60Cement For Mortar & Filler :21.00bagsArea to be Plastered ? :80.00Cement For Plastering :15.36bagsSand for Plastering :1.28cu.m.Sand for Mortar & Filler :1.75cu.m.Tie Wires :2.00kgs.33PLASTERING7250Total Area of Soffits Ceiling ? :60.00Cement :11.52bagsTotal Surface Area of Beams ? :Sand :0.97cu.m.Total Surface Area of Columns ? :34CONCRETE MOLDINGInput 1if you use Concrete Molding or Leave Blank if not ? :0.0Total Length of Concrete Moldings ? :Concrete Molding :0.0li.m.35TILE WORKSInput 1 if you use 4"x4" Tile or Leave it Blank if not ? :1.004"x4" tiles :200.00pcs.Total Arae of 4"x4" Tiles ? :2.008"x8" tiles :700.00pcs.Input 1 if you use 8"x8" Tile or Leave it Blank if not ? :1.0012" x 12" tiles :1,333.33pcs.Total Arae of 8"x8" Tiles ? :28.0016" x 16" tiles :0.0pcs.Input 1 if you use 12"x12" Tile or Leave it Blank if not ? :1.0012"x12" Vinyl Tiles :0.0pcs.Total Arae of 12"x12" Tiles ? :120.00Tile Adhesive :450.00kgs.Input 1 if you use 16"x16" Tile or Leave it Blank if not ? :Tile Grout :30.00kgs.Total Arae of 16"x16" Tiles ? :Tile Trim :0.0pcs.Input 1 if you use 12"x12" Vinyl or Leave it Blank if not ? :Rugby :0.0gal.Total Area of Vinyl Tiles ? :Total Length of Tile Trim ? :36.1TOPPINGSTotal Area of Slab on Fill ? :14.00Cement :4.03bags6.3504Total Arae of Suspended Slab ? :0.0Sand :0.45cu.m.0.67236.2PEBBLE WASH-OUT FINISHInput 1 if you use Pebble Finish or leave it Blank if not ? :1.00Total Area to be Pebble Wash-out ? :19.00Bebbles :0.48cu.m.Thickness of Pebbles Wash-Out ? :0.03Cement :15.83bags36.3BRICKS OR RABBLESInput 1if your using Either of the two or Leave it Blank if not ? :1.00Input 1 if you use Bricks or Leave Blank if Rabbles ? :1.00Bricks :3,466.67pcs.Area to be installed by Bricks or Rabbles ? :26.00Rabbes :0.0pcs.Area of Single Bricks or Rabbles ? :0.01Cement :4.99bagsSand :0.42cu.m.36.4PLAIN CEMENT FINISHTotal Area of Plain Cement Finish ? :237.00Cement :19.75bags41ROOF FRAMINGRoofing Area ? :160.002x4 C-Purlins :41.90pcs.Max No. of Member in One Joint ? :4.002x6 C-Rafters :14.24pcs.Spacing of C-Purlins ? :0.70Welding Rod :32.00kgs.Total Length of 2x6 C-purlins Not Considering the Inclination ? :70.00Steel Plate :10.00pcs.Angle of Inclination ? :35.00Anchor Bolt :20.00pcs.No. of Anchored Base For Rufters ? :10.00Sag Rod :16.00pcs.44ROOFINGInput 1 if you use G.I. Sheet as Top Roof or Leaved it Blank if not ? :1.00Input 1 if you use Roof Tiles or Leaved it Blank if not ? :0.0Input 1 if you use Asphalt Shingles or Leaved it Blank if not ? :44.1ROOFING using Corr. G.I.Did you use corr. G.I. sheet? Input 1 if True & Leave it blank if False ? :1.00Roofing Area ? :180.00Corrugated Sheet Roofing :Eff. Area of Single G.I. Corrugated Sheet for Top Roof ? :2.00G.I. Corr. Sheet for Top Roof:90.00pcs.Total Length of Ridge ? :25.00Ridge Roll :11.90pcs.Effective Length of Single Ridge Roll ? :2.10Total Length of Valley ? :8.00Effective Length of Single Valley Roll ? :2.10Total Length of Flashing ? :0.0Valley Roll :3.81pcs.Effective Length of Single Flashing Sheet ? :2.10Flashing Sheet :0.0pcs.Total Length of Fascia Board ? :60.00Fascia Board :28.57pcs.Effective Length of Single Fascia Board ? :2.10Tekscrew ;900.00pcs.Total Length of Gutter ? :34.00G.I. Gutter :15.11pcs.Effective Length of Single Gutter :2.25Silicon Sealant :0.0li.44.2ROOFING using Contrex Roof TilesRoofing Area ? :0.0Roof Tiles Roofing :Down End Length ? :12.00Flat Tiles :0.0pcs.Ridge Length ? :6.00Down End :0.0pcs.Left End Barge Length? :2.40Right Hand Barge :0.0pcs.Right Hand Barge Length? :2.40Left hand Barge :0.0pcs.Effective Length of Single Down End Tiles ? :0.30Ridge Tiles :0.0pcs.Effective Length of Single Ridge Tiles ? :0.29G.I. Corr. Roofing Sheet :0.0pcs.Effective length of Single Left Hand Barge ? :0.28Metal Battens :0.0pcs.Effective length of Single Rigth Hand Barge ? :0.30Valley Roll :0.0pcs.Valley Gutter Length ? :0.0Flashing Sheet :0.0pcs.Effective Length of Single Valley Gutter ? :2.35Fascia Board :0.0pcs.Total Flashing Length ? :4.80Fascia Screw :0.0pcs.Effective Length of Single Flashing Sheet ? :2.35Ripper Screw:0.0pcs.Total Length of Fascia Board ? :12.00Tekscrew ;0.0pcs.Effective Length of Single Fascia Board ? :2.35Battens Screw :0.0pcs.Effective G.I. Roofing Sheet for Undersheeting ? :2.50Spacing of Vertical Battens ? :0.60Spacing of Horizontal Batten ? :0.50Eff. Area of Single Flat Tiles ? :0.09Eff. Area of Single Down End ? :0.09Eff. Area of Single Rigth Hand Barge ? :0.09Eff. Area of Single Left Hand Barge ? :0.0944.3ROOFING using Asphalt ShinglesRoofing Area ? :60.00Asphalt Shingles Roofing:Area of Asphalt Filler ? :60.00Asphalt Shingles:0.0pcs.Effective Area of Single Asphalt Shingles ? :0.40Asphalt Filler:0.0sq.m.Marine Plywood:0.0pcs.CWN #1:0.0kgs.Tekscrew :0.0pcs.51PARTITIONInput 1 if you use Ficem Board or leave it Blank if not ? :Ficem Board :0.0pcs.Input 1 if you use Gypsum Board or Leave it Blank if not ? :Gypsum Board :0.0pcs.Ficem Board Wall Area ? :Metal Stud :0.0pcs.Gypsum Board Wall Area ? :Blind Rivet :0.0pcs.Spacing of Vertical Metal Studs ? :Flat Head Screw :0.0pcs.Spacing of Horizontal Metal Studs ? ;52/53CEILINGInput 1 if you use Ficem Board or leave it Blank if not ? :1.00Ficem Board :44.10pcs.Input 1 if you use Gypsum Board or Leave it Blank if not ? :0.0Gypsum Board :0.0pcs.Interior Ficem Board Ceiling Area ? :127.00Carrying Channel :116.42pcs.Exterior Ficem Board Ceiling Area ? :Interior Gypsum Board Ceiling Area ? :Furring Channel :232.83pcs.Exterior Gypsum Board Ceiling Area ? :Spacing of Carrying Channel ? :1.20Hunger :63.50pcs.Spacing of Furring Channel ? :0.60Flat Head Screw :881.94pcs.Vents :0.0pcs.No. of Vents ? :54STAIRS & RAILINGSInput 1 if Have Metal Railings or Leave It Blank if not ? :1.00Handrails :8.00ln.m.Length of Metal Railings ? :8.00Metal Railing :77.47sq.m.Height of Railings ? :0.90Expansion Bolt :13.00pcs.55CABINETS & CLOSETSNo. of Cabinet ? :Cabinet :0.0setNo. of Closets ? :Closets :0.0setExpantion Bolt :0.0pcs.58BASEBOARD & CORNICES :Total Length of Base Board ? :Base Board :0.0pcs.Total Length of Cornices ? :Cornice :0.0pcs.Wood Glue :0.0li.64/65DOORS & WINDOWS :No. of Panel Doors :1.00Panel Door :1.00pcs.No. of Flush Doors :6.00Flush Door :6.00pcs.Total Window Area :17.00Door Jambs :7.00pcs.Hinges :21.00pcs.Lockset (main Door) :1.00pcs.Lockset Ordinary :6.00pcs.Window Frames :17.00sq.m.Window Glass :17.00sq.m.71ELECTRICAL ROUGH-INSCircuit Breaker 20A (2 Poles)8.00Circuit Breaker 30A2.00Circuit Breaker 40ACircuit Breaker 100A1.00Panel Board 12 Branches 100A1.0015mm Polyflex20mm PolyflexIMC Pipe 25mm x 10mmTHW 8.0 mm.sq.L.B. Conduit #1Porcelain Split KnobsG.I. Bushing #165mm C ClampElectrical Tape (big)66Utility Box (2x2x4)34.00198Cut Out Box (4x4)7.0072ELECTRICAL FINISHINGOne Way Gang Switch (100 watts)10.00One Way Two Gang Switch (100 Watts)2.00One Gang Three Way Switch (100 Watts)1.00Two Gang C.O. - (200 Watts)14.00Two Gang C.O. W.P. - (200 Watts)One Gang C.O. Ref - (800 Watts)1.00One Gang C.O. Range (800 Watts)1.00One Gang C.O. - ACU (1.5 Hp)1.00Porcelain Socket 2x215.0081PLUMBING ROUGH-INSPVC Pipe 3/4 x1040.00PVC Elbow 3/424.00PVC. Tee 3/410.00PVC Coupling 3/43.00PVC Solvent Cement4.00Tefpon TapeG.I. Nipple 3/4x62.00G.I. Coupling 3/4 x 1/22.00GI. End Cap 1/22.00PVC Pipe 50mm38.25PVC Pipe 100mm26.33PVC 1/4 Bend #28.00PVC Tee 4x20.0PVC Wye 4x26.00PVC P-Trap#22.00PVC C.O. w/ Adopter #44.00PVC Solvent Cement2.0082PLUMBING FINISHING3/4 H & Brass Faucet3.00Water Closet2.00Lavatory w/ Fittings2.00Floor Drain 4x43.00N.P. Faucet 1/2x6Tel. Shower Head w/ Valve2.00Kitchen Sink2.00Tissue Holder2.00Soap Holder2.00Towei Bar2.00Curtain Rod 3/4 x 1.252.0083SEPTIC TANKInput 1 if you use CHB 4" or Leaved it Blank if not ? :1.00Floor Area :3.00sq.m.Input 1 if you use CHB 6" or Leaved it Blank if not ? :CHB Area :12.90sq.m.Length of Excavation ? :2.50No. of CHB 4" :161.25pcs.Width of Excavation ? :1.20No. of CHB 6" :0.0pcs.Height of Excavation ? :1.50No. of 10mm dia. RSB :12.59pcs.Total Linear Meter of Perimeter Wall Including Internal Partition ? :8.60No. of 12mm dia. RSB :0.0pcs.Height of Wall ? :1.50Cement For Plastering :2.97bagsThickness of Slab on Fill ? :0.10Sand for Plastering :0.25cu.m.Thickiness of Suspended Slab ? :0.10Cement For Mortar & Filler CHB#4:6.77bagsInput 1 if you use 10mm dia. Bars or Leaved it Blank if not ? :1.00Sand for Mortar & Filler CHB#4 :0.56cu.m.Input 1 if you use 12mm dia. Bars or Leaved it Blank if not ? :Cement For Mortar & Filler CHB#6:0.0bagsSpacing of Bars on Slab on Fill ? ;0.50Sand for Mortar & Filler CHB#6 :0.0cu.m.Spacing of Bars on Suspended Slab ? :0.30Cement For Concreting works :4.50bagsSpacing of Wall Vertical Bars ? :0.60Sand for Concreting works :0.30cu.m.Spacing of Wall Horizontal Bars ? :0.60Gravel for Concreting works :0.60cu.m.Tie Wires :2.45kgs.Volume of Excavation :4.50cu.m.Volume of Concrete :0.60cu.m.Formworks :3.00sq.m.90.1PAINTING OF CONCRETEInterior Wall ? :237.00Concrete Neutralizer :7.90gal.164.112Exterior Wall ? :Flat Latex for Primer :7.90gal.16.72Interior Ceiling ? :Acritex Cast :15.80gal.147.392Exterior Ceiling ? :0.0Flat Latex for Int. 2nd & 3rd coat :15.80gal.Other Considerable Interior Area ? :Semi Gloss Latex for Ext. 2nd & 3rd coat :0.0gal.Other Considerable Exterior Area ? :Sanding Paper #180 :39.50pcs.90.2PAINTING OF WOODInterior Wall ? :0.0Flat Wall Enamel :4.88gal.Interior Ceiling ? :80.00Glazing Putty :4.07gal.Exterior Ceiling ? :42.00Quick Dry Enamel :9.76gal.Input 1 if you use Oil Wood Stain for Stairs or Leave it Blank if not ? :0.0Paint Thinner :1.46gal.Input 1 if you use Flat Wall Enamel for Stairs or Leave it Blank if not ? :0.0Wood Bleach :0.0gal.Total Wooden Stairs Area ? :0.0Oil Wood Stain :0.0gal.Input 1 if you use Oil Wood Stain for Railings or Leave it Blank if not ? :0.0Sanding Sealer :0.0gal.Input 1 if you use Flat Wall Enamel for Railing or Leave it Blank if not ? :0.0Flat Laquer :0.0gal.Total Wooden Railing Area ? :0.0Sanding Paper #100 :0.0pcs.Input 1 if you use Oil Wood Stain for Cabinet & Closets or Leave it Blank if not ? :0.0Input 1 if you use Flat Wall Enamel for Cabinets & Clostes or Leave it Blank if not ? :0.0Total Cabinets & Closets Area ? :0.0Input 1 if you use Oil Wood Stain for Doors & Windows or Leave it Blank if not ? :0.0Input 1 if you use Flat Wall Enamel for Doors & Windows or Leave it Blank if not ? :0.0Doors & Windows ? :0.0Input 1 if you use Oil Wood Stain for Other Considerable or Leave it Blank if not ? :0.0Input 1 if you use Flat Wall Enamel for Other Considerable or Leave it Blank if not ? :0.0Plus Other Considerable Area ? :0.090.3PAINTING OF METALTotal Area of Steel Surfaces ? :40.00Red Oxide Primer :1.33gal.Quick Dry Enamel :1.33gal.Sanding Paper :6.67pcs.Paint Thinner :0.40gal.

Allan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:Input Only 1 or Leave it BlankAllan Jaurigue:Input Only 1 or Leave it BlankAllan Jaurigue:Input Only 1 or Leave it BlankAllan Jaurigue:Input Only 1 or Leave it BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:Input Only No. 1 or Leave It BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankAllan Jaurigue:Input only No. 1 or Leave it BlankREY PAZ:vitrified (35.5);REY PAZ:vitrifiedREY PAZ:vit=887.5 glace=675

Recovered_Sheet1BILL OF MATERIALSPROJECT TITLE:PERIMETER FENCELocation:ENGR. ROMEL BUCAYU RESIDENCEITEM CODEITEM OF WORKSDESCRIPTIONQTY.UNITUNIT COSTAMOUNTRSB48I. CONCRETING WORKS*0.033,350.000pcs11. Columns0.00CEMENT16.00bags200.003,200.000SAND1.00cu.m.400.00400.00wall51.2sides1.2GRAVEL2.00cu.m.500.001,000.00RBS #1617.00pcs.250.004,250.00RBS #1024.00pcs.180.004,320.00Plywood8.00pcs.400.003,200.00Good Lumber100.00bd.ft.40.004,000.00CWN No. 11.00kgs.70.0070.00CWN No. 31.00kgs.70.0070.00Tie Wire guage 162.00kgs.80.00160.0012. Beams0.0CEMENT16.00bags200.003,200.00SAND1.00cu.m.400.00400.00GRAVEL2.00cu.m.500.001,000.00RBS #1616.00pcs.250.004,000.00RBS #1020.00pcs.180.003,600.00Tie Wire guage 166.00kgs.80.00480.00II. MASONRY WORKS*0.016,000.0021. CHB LayingRSB No. 1023.00pcs.180.004,140.00Tie wire gauge 162.00kgs.80.00160.00Cement21.00bags200.004,200.00Sand1.75cu.m.400.00700.00CHB No 4500.00pcs.8.004,000.0022. PlasteringCement12.00bags200.002,400.00Sand1.00cu.m.400.00400.00III. STEEL WORKS21,000.0031. Steel GrilleSteel Grille15.00sq.m.1,000.0015,000.0032. Steel GateSteel Gate6.00sq.m.1,000.006,000.00IV. PAINTING WORKS4,740.0041. ConcreteConcrete Neutralizer1.00gal.50.0050.00Flat Latex for Primer2.00gal.330.00660.00Acritex Cast4.00gal.380.001,520.00Semi Gloss Latex4.00gal.360.001,440.00Sanding Paper #18010.00pcs.20.00200.0042. SteelRed Oxide Primer1.00gal.190.00190.00Quick Dry Enamel2.00gal.250.00500.00Sanding Paper #1806.00pcs.20.00120.00Paint Thinner1.00gal.60.0060.00Prepared by:MATERIAL COST:70,350.00Engr. Bobby LupangoLABOR COST:21,105.00Civil Engr.PTR #: 0084358TOTAL PROJECT COST:91,455.00

Recovered_Sheet2BILL OF MATERIALSHouse Model:VICENZAFloor Area:90.00sq.m.Location:Gardens of Maia AltaITEM CODEITEM OF WORKSDESCRIPTIONQTY.UNITUNIT COSTAMOUNT10. EARTHWORKS11. Staking Lay-OutCoco Lumber0.0bd.ft.Good Lumber243.00bd.ft.CWN No. 10.0kgs.CWN No. 20.90kgs.CWN No. 30.90kgs.Nylon String50.60ln.m.12. Excavation13. Gravel Bedding*Gravel G16.00cu.m.14. Soil Poisoning*Soil Treatment Chem.1.20li.15. Backfilling*Excess/barrow6.00cu.m.20. CONCRETING WORKS*21. Foundation*RSB No. 100.0pcsRSB No. 1258.25pcsRSB No. 160.0pcsTie wire gauge 1625.38kgs.Cement63.45bagsSand4.23cu.m.Gravel G110.20cu.m.22. Columns*Lumber66.91bd.ft.Form ply11.10pcs.CWN No. 11.11kgs.CWN No. 21.34kgs.CWN No. 31.67kgs.RSB No. 1027.00pcsRSB No. 120.0pcsRSB No. 1620.00pcsTie wire gauge 165.63kgs.Cement16.88bagsSand0.94cu.m.Gravel G11.88cu.m.23. Beams*Lumber56.94bd.ft.Form ply11.47pcs.CWN No. 11.15kgs.CWN No. 25.69kgs.CWN No. 35.69kgs.RSB No. 1026.00pcsRSB No. 120.0pcsRSB No. 1620.67pcsTie wire gauge 165.58kgs.Cement16.74bagsSand0.93cu.m.Gravel 3/41.86cu.m.24. Suspended Slab*Lumber0.0bd.ft.Form ply0.0pcs.CWN No. 10.0kgs.CWN No. 20.0kgs.CWN No. 30.0kgs.RSB No. 100.0pcsRSB No. 120.0pcsRSB No. 160.0pcsTie wire gauge 160.0kgs.Cement0.0bagsSand0.0cu.m.Gravel 3/40.0cu.m.Steel Deck0.0sq.m.25. Slab on Fill*RSB No. 100.0pcsRSB No. 1216.81pcsTie wire gauge 1616.80kgs.Cement50.40bagsSand2.80cu.m.Gravel G111.20cu.m.26. Service Entrance*RSB No. 100.0pcsRSB No. 120.0pcsTie wire gauge 160.0kgs.Cement0.0bagsSand0.0cu.m.Gravel G10.0cu.m.27. Stairs*Lumber0.0bd.ft.Form ply0.0pcs.CWN No. 10.0kgs.CWN No. 20.0kgs.CWN No. 30.0kgs.RSB No. 100.0pcsRSB No. 120.0pcsRSB No. 160.0pcsTie wire gauge 160.0kgs.Cement0.0bagsSand0.0cu.m.Gravel 3/40.0cu.m.30. MASONRY WORKS*31. Batter Board*Good Lumber0.0bd.ft.Concrete Nail0.0kgs.32. CHB Laying*RSB No. 1061.66pcs.Tie wire gauge 165.50kgs.Cement91.91bagsSand7.66cu.m.CHB No 6875.00pcs.CHB No 4500.00pcs.33. Plastering*Cement52.22bagsSand4.36cu.m.34. Concrete Molding*Concrete Molding0.0li.m.35. Tile Works*4"x4" tiles200.00pcs.8"x8" tiles700.00pcs.12" x 12" tiles1,333.33pcs.16" x 16" tiles0.0pcs.12"x12" Vinyl Tiles0.0pcs.Tile Adhesive :450.00kgs.Tile Grout :30.00kgs.Tile Trim :0.0pcs.Rugby :0.0li.36. Floor Toppings*Cement4.032bagsSand0.448cu.m.37. Other Finishing works*Cement40.58bagsSand0.42cu.m.Pebble Wash-Out0.48cu.m.Bricks3,466.67pcs.Rabbles0.0pcs.IV. THERMAL & MOISTURE PROTECTION*1. Roof Framing*2x4 C-Purlins :41.90pcs.2x6 C-Rafters :14.24pcs.Welding Rod :32.00kgs.Steel Plate :10.00pcs.Anchor Bolt :20.00pcs.Sag Rod :16.00pcs.2. Water Proofing*G.I. Corr. Sheet for Top Roof:90.00pcs.Ridge Roll :11.90pcs.Valley Roll :3.81pcs.Flashing Sheet :0.0pcs.Fascia Board :28.57pcs.Tekscrew ;900.00pcs.G.I. Gutter :15.11pcs.Silicon Sealant :0.0pcs.*Flat Tiles :0.0pcs.Down End :0.0pcs.Right Hand Barge :0.0pcs.Left hand Barge :0.0pcs.Ridge Tiles :0.0pcs.G.I. Corr. Roofing Sheet :0.0pcs.Metal Battens :0.0pcs.Valley Roll :0.0pcs.Flashing Sheet :0.0pcs.Fascia Board :0.0pcs.Fascia Screw :0.0pcs.Ripper Screw:0.0pcs.Tekscrew ;0.0pcs.Battens Screw :0.0pcs.*Asphalt Shingles:0.0pcs.Asphalt Filler:0.0sq.mMarine Plywood:0.0pcs.CWN #1:0.0kgs.Tekscrew :0.0pcs.V. CARPENTRY WORKS*1. Partition Wall*Ficem Board0.0pcs.Gypsum Board0.0pcs.Metal Stud0.0pcs.Blind Rivet0.0pcs.Flat Head Screw0.0pcs.2. Ceiling*Ficem Board44.10pcs.Gypsum Board0.0pcs.Carrying Channel116.42pcs.Furring Channel232.83pcs.Hunger63.50pcs.Flat Head Screw881.94pcs.3. Stair & Railing*Handrails8.00ln.m.Metal Railing77.47sq.m.Expansion Bolt13.00pcs.4. Cabinets & Closets*Cabinets0.0setClosets0.0setExpansion Bolt0.0pcs.5. Base Board & Cornices*Baseboard0.0pcs.Cornices0.0pcs.Wood Glue0.0li.VI. DOORS & WINDOWS1. DoorsPanel Door1.00setFlush Door6.00setDoor Jambs7.00setHinges21.00setLockset (main Door)1.00setLockset Ordinary6.00set2. WindowsWindow Frames17.00sq.m.Window Glass17.00sq.m.VII. ELECTRICAL WORKS1. Electrical Rough-insCircuit Breaker 20A (2 Poles)8.00setsCircuit Breaker 30A2.00setsCircuit Breaker 40A0.0setsCircuit Breaker 100A1.00setsPanel Board 12 Branches 100A1.00sets15mm Polyflex0.0rolls20mm Polyflex0.0rollsIMC Pipe 25mm x 10mm0.0pcs.THW 8.0 mm.sq.0.0pcs.L.B. Conduit #10.0pcs.Porcelain Split Knobs0.0pcs.G.I. Bushing #10.0pcs.65mm C Clamp0.0pcs.Electrical Tape (big)0.0pcs.Utility Box (2x2x4)34.00pcs.Cut Out Box (4x4)7.00pcs.2. Electrical FinishingOne Way Gang Switch (100 watts)10.00pcsOne Way Two Gang Switch (100 Watts)2.00pcsOne Gang Three Way Switch (100 Watts)1.00pcsTwo Gang C.O. - (200 Watts)14.00pcsTwo Gang C.O. W.P. - (200 Watts)0.0pcsOne Gang C.O. Ref - (800 Watts)1.00pcsOne Gang C.O. Range (800 Watts)1.00pcsOne Gang C.O. - ACU (1.5 Hp)1.00pcsPorcelain Socket 2x215.00pcsVIII. PLUMBING WORKS1. Plumbing Rough-insPVC Pipe 3/4 x1040.00pcs.PVC Elbow 3/424.00pcs.PVC. Tee 3/410.00pcs.PVC Coupling 3/43.00pcs.PVC Solvent Cement4.00pcs.Tefpon Tape0.0pcs.G.I. Nipple 3/4x62.00pcs.G.I. Coupling 3/4 x 1/22.00pcs.GI. End Cap 1/22.00pcs.PVC Pipe 50mm38.25pcs.PVC Pipe 100mm26.33pcs.PVC 1/4 Bend #28.00pcs.PVC Tee 4x20.0pcs.PVC Wye 4x26.00pcs.PVC P-Trap#22.00pcs.PVC C.O. w/ Adopter #44.00pcs.PVC Solvent Cement2.00pcs.Elbow PVC15.002. Plumbing Finishing3/4 H & Brass Faucet3.00pcs.Water Closet2.00setsLavatory w/ Fittings2.00setsFloor Drain 4x43.00pcs.N.P. Faucet 1/2x60.0pcs.Tel. Shower Head w/ Valve2.00setsKitchen Sink2.00setsTissue Holder2.00setsSoap Holder2.00setsTowei Bar2.00pcs.Curtain Rod 3/4 x 1.252.00pcs.IX. PAINTING1. ConcreteConcrete Neutralizer7.90gal.Flat Latex for Primer7.90gal.Acritex Cast15.80gal.Flat Latex for Int. 2nd & 3rd coat15.80gal.Semi Gloss Latex for Ext. 2nd & 3rd coat0.0gal.Sanding Paper #18039.50pcs.2. WoodFlat Wall Enamel4.88gal.Glazing Putty4.07gal.Quick Dry Enamel9.76gal.Paint Thinner1.46gal.Wood Bleach0.0gal.Oil Wood Stain0.0gal.Sanding Sealer0.0gal.Flat Laquer0.0gal.Sanding Paper #1000.0pcs.3. MetalRed Oxide Primer1.33gal.Quick Dry Enamel1.33gal.Sanding Paper #1806.67pcs.Paint Thinner0.40gal.

Recovered_Sheet3BILL OF MATERIALSPROJECT TITLE:Residential BuildingResidential BuildingFloor Area:127.00127.00sq.m.Location:Cauayan, IsabelaCauayan, IsabelaITEM CODEITEM OF WORKSDESCRIPTIONQTY.UNITUNIT COSTAMOUNTI. EARTHWORKS10,720.0011. Staking Lay-OutGood Lumber200.00160.00bd.ft.30.004,800.00CWN No. 21.001.00kgs.30.0030.00CWN No. 31.001.00kgs.30.0030.00Nylon String50.0040.00ln.m.1.0040.0012. Gravel Bedding*0.00.0Gravel G16.005.00cu.m.400.002,000.0013. Soil Poisoning*0.00.0Soil Treatment Chem.1.201.00li.300.00300.0014. Backfilling*0.00.0Excess/barrow80.0064.00cu.m.55.003,520.00II. CONCRETING WORKS*0.00.093,360.0021. Foundation*0.00.0RSB No. 1258.0046.00pcs150.006,900.00Tie wire gauge 1625.0020.00kgs.35.00700.00Cement60.0048.00bags150.007,200.00Sand4.504.00cu.m.300.001,200.00Gravel G110.508.00cu.m.400.003,200.0022. Columns*0.00.0Lumber120.0096.00bd.ft.30.002,880.00Form ply20.0016.00pcs.250.004,000.00CWN No. 12.002.00kgs.25.0050.00CWN No. 22.502.00kgs.30.0060.00CWN No. 33.002.00kgs.30.0060.00RSB No. 1048.0038.00pcs100.003,800.00RSB No. 1636.0029.00pcs250.007,250.00Tie wire gauge 1610.008.00kgs.35.00280.00Cement30.0024.00bags150.003,600.00Sand1.701.00cu.m.300.00300.00Gravel G13.403.00cu.m.400.001,200.0023. Beams*0.00.0Lumber140.00112.00bd.ft.30.003,360.00Form ply25.0020.00pcs.250.005,000.00CWN No. 12.502.00kgs.25.0050.00CWN No. 25.004.00kgs.30.00120.00CWN No. 35.004.00kgs.30.00120.00RSB No. 1057.0046.00pcs100.004,600.00RSB No. 1650.0040.00pcs250.0010,000.00Tie wire gauge 1610.008.00kgs.35.00280.00Cement35.0028.00bags150.004,200.00Sand1.902.00cu.m.300.00600.00Gravel 3/43.803.00cu.m.450.001,350.0024. Slab on Fill*0.00.0RSB No. 1070.0056.00pcs100.005,600.00Tie wire gauge 1610.008.00kgs.25.00200.00Cement80.0064.00bags150.009,600.00Sand4.504.00cu.m.300.001,200.00Gravel G114.0011.00cu.m.400.004,400.000.00.0III. MASONRY WORKS*0.00.0154,398.0031. CHB Laying*0.00.0RSB No. 10148.00118.00pcs.100.0011,800.00Tie wire gauge 1613.0010.00kgs.35.00350.00Cement217.00174.00bags150.0026,100.00Sand18.0014.00cu.m.300.004,200.00CHB No 62,000.001,600.00pcs.7.0011,200.00CHB No 41,300.001,040.00pcs.5.005,200.0032. Plastering*0.00.0Cement45.0036.00bags150.005,400.00Sand3.803.00cu.m.300.00900.0033. Floor Toppings*0.00.0Cement35.1428.00bags150.004,200.00Sand3.903.00cu.m.280.00840.0034. Tile Works*0.00.04"x4" tiles200.00160.00pcs.10.001,600.008"x8" tiles700.00560.00pcs.25.0014,000.0012" x 12" tiles1,335.001,068.00pcs.45.0048,060.00Tile Adhesive :450.00360.00kgs.10.003,600.00Tile Grout :30.0024.00kgs.26.00624.00Tile Trim :5.004.00pcs.105.00420.0035. Other Finishing works*0.00.0Cement40.5832.00bags150.004,800.00Sand0.500.0cu.m.300.000.0Bricks3,470.002,776.00pcs.4.0011,104.000.00.0IV. THERMAL & MOISTURE PROTECTION*0.00.053,805.0041. Roof Framing*0.00.02x4 C-Purlins :30.0024.00pcs.160.003,840.00L40x40x6mm60.0048.00pcs.350.0016,800.00L30x30x6mm30.0024.00pcs.280.006,720.00Welding Rod :32.0026.00kgs.25.00650.00Steel Plate :10.008.00pcs.30.00240.00Anchor Bolt :20.0016.00pcs.80.001,280.00Sag Rod :16.0013.00pcs.60.00780.0042. Water Proofing*0.00.0G.I. Corr. Sheet for Top Roof:90.0072.00pcs.260.0018,720.00Ridge Roll :11.9010.00pcs.130.001,300.00Valley Roll :3.813.00pcs.120.00360.00Fascia Board :28.5723.00pcs.64.001,472.00Tekscrew ;900.00720.00pcs.1.00720.00G.I. Gutter :15.1112.00pcs.69.00828.00Silicon Sealant :1.001.00pcs.95.0095.000.00.0V. CARPENTRY WORKS*0.00.042,595.0051. Ceiling*0.00.0Ficem Board44.1035.00pcs.210.007,350.00Carrying Channel116.4293.00pcs.80.007,440.00Furring Channel232.83186.00pcs.60.0011,160.00Hunger63.5051.00pcs.15.00765.00Flat Head Screw800.00640.00pcs.2.001,280.0052. Stair & Railing*0.00.0Handrails8.006.00ln.m.300.001,800.00Metal Railing77.4762.00sq.m.200.0012,400.00Expansion Bolt13.0010.00pcs.40.00400.000.00.0VI. DOORS & WINDOWS0.00.025,085.0061. Doors0.00.0Panel Door1.001.00set3,000.003,000.00Flush Door6.005.00set1,000.005,000.00Door Jambs7.006.00set500.003,000.00Hinges21.0017.00set35.00595.00Lockset (main Door)1.001.00set280.00280.00Lockset Ordinary6.005.00set150.00750.0062. Windows0.00.0Window Frames17.0014.00sq.m.800.0011,200.00Window Glass17.0014.00sq.m.90.001,260.000.00.0VII. ELECTRICAL WORKS0.00.030,000.000.00.0VIII. PLUMBING WORKS0.00.049,565.001. Plumbing Rough-ins0.00.0PVC Pipe 1" x109.007.00pcs.150.001,050.00PVC Elbow 1"5.004.00pcs.10.0040.00PVC Elbow Reducer 1"x3/4"2.002.00pcs.10.0020.00PVC. Tee 1"1.001.00pcs.15.0015.00PVC. Tee Reducer 1"x3/4"8.006.00pcs.15.0090.00PVC Coupling 1"10.008.00pcs.10.0080.00PVC Pipe 3/4 x105.004.00pcs.120.00480.00PVC Elbow 3/49.007.00pcs.10.0070.00PVC. Tee 3/42.002.00pcs.15.0030.00PVC Solvent Cement5.004.00pcs.50.00200.00PVC Pipe 50mm8.006.00pcs.180.001,080.00PVC Pipe 100mm9.007.00pcs.200.001,400.00PVC Elbow #41.001.00pcs.20.0020.00PVC Elbow #23.002.00pcs.15.0030.00PVC Tee 4x22.002.00pcs.20.0040.00PVC Tee 4x43.002.00pcs.20.0040.00PVC P-Trap#27.006.00pcs.100.00600.00PVC C.O. w/ Adopter #42.002.00pcs.100.00200.002. Plumbing Finishing0.00.03/4 H & Brass Faucet7.006.00pcs.80.00480.00Water Closet2.002.00sets5,000.0010,000.00Lavatory Closet2.002.00sets2,000.004,000.00Lavatory w/ Fittings4.003.00sets500.001,500.00Floor Drain 4x42.002.00pcs.50.00100.00Tel. Shower Head w/ Valve2.002.00sets500.001,000.00Kitchen Sink1.001.00sets5,000.005,000.00Tissue Holder2.002.00sets500.001,000.00Soap Holder2.002.00sets500.001,000.00Towei Bar2.002.00pcs.1,500.003,000.00Curtain Rod 3/4 x 1.252.002.00pcs.1,000.002,000.00Bathtub1.001.00pcs.15,000.0015,000.00IX. PAINTING0.00.026,240.001. Concrete0.00.0Concrete Neutralizer5.005.00gal.50.00250.00Flat Latex for Primer8.008.00gal.330.002,640.00Acritex Cast16.0016.00gal.380.006,080.00Flat Latex for Int. 2nd & 3rd coat10.0010.00gal.330.003,300.00Semi Gloss Latex for Ext. 2nd & 3rd coat6.006.00gal.360.002,160.00Sanding Paper #18040.0040.00pcs.20.00800.002. Wood0.0Flat Wall Enamel10.0010.00gal.320.003,200.00Glazing Putty8.008.00gal.300.002,400.00Quick Dry Enamel15.0015.00gal.300.004,500.00Paint Thinner0.500.50gal.80.0040.003. Metal0.0Red Oxide Primer1.001.00gal.190.00190.00Quick Dry Enamel2.002.00gal.250.00500.00Sanding Paper #1806.006.00pcs.20.00120.00Paint Thinner1.001.00gal.60.0060.00MATERIAL COST:485,768.00LABOR COST:145,730.40TOTAL PROJECT COST:631,498.40

Recovered_Sheet4BILL OF MATERIALSPROJECT TITLE:Residential BuildingResidential BuildingFloor Area:127.00127.00sq.m.Location:Cauayan, IsabelaCauayan, IsabelaITEM CODEITEM OF WORKSDESCRIPTIONQTY.UNITUNIT COSTAMOUNTI. EARTHWORKS15,700.0011. Staking Lay-OutGood Lumber200.00240.00bd.ft.30.007,200.00CWN No. 21.001.00kgs.30.0030.00CWN No. 31.001.00kgs.30.0030.00Nylon String50.0060.00ln.m.1.0060.0012. Gravel Bedding*0.00.0Gravel G16.007.00cu.m.400.002,800.0013. Soil Poisoning*0.00.0Soil Treatment Chem.1.201.00li.300.00300.0014. Backfilling*0.00.0Excess/barrow80.0096.00cu.m.55.005,280.00II. CONCRETING WORKS*0.00.0139,945.0021. Foundation*0.00.0RSB No. 1258.0070.00pcs150.0010,500.00Tie wire gauge 1625.0030.00kgs.35.001,050.00Cement60.0072.00bags150.0010,800.00Sand4.505.00cu.m.300.001,500.00Gravel G110.5013.00cu.m.400.005,200.0022. Columns*0.00.0Lumber120.00144.00bd.ft.30.004,320.00Form ply20.0024.00pcs.250.006,000.00CWN No. 12.002.00kgs.25.0050.00CWN No. 22.503.00kgs.30.0090.00CWN No. 33.004.00kgs.30.00120.00RSB No. 1048.0058.00pcs100.005,800.00RSB No. 1636.0043.00pcs250.0010,750.00Tie wire gauge 1610.0012.00kgs.35.00420.00Cement30.0036.00bags150.005,400.00Sand1.702.00cu.m.300.00600.00Gravel G13.404.00cu.m.400.001,600.0023. Beams*0.00.0Lumber140.00168.00bd.ft.30.005,040.00Form ply25.0030.00pcs.250.007,500.00CWN No. 12.503.00kgs.25.0075.00CWN No. 25.006.00kgs.30.00180.00CWN No. 35.006.00kgs.30.00180.00RSB No. 1057.0068.00pcs100.006,800.00RSB No. 1650.0060.00pcs250.0015,000.00Tie wire gauge 1610.0012.00kgs.35.00420.00Cement35.0042.00bags150.006,300.00Sand1.902.00cu.m.300.00600.00Gravel 3/43.805.00cu.m.450.002,250.0024. Slab on Fill*0.00.0RSB No. 1070.0084.00pcs100.008,400.00Tie wire gauge 1610.0012.00kgs.25.00300.00Cement80.0096.00bags150.0014,400.00Sand4.505.00cu.m.300.001,500.00Gravel G114.0017.00cu.m.400.006,800.000.00.0III. MASONRY WORKS*0.00.0232,622.0031. CHB Laying*0.00.0RSB No. 10148.00178.00pcs.100.0017,800.00Tie wire gauge 1613.0016.00kgs.35.00560.00Cement217.00260.00bags150.0039,000.00Sand18.0022.00cu.m.300.006,600.00CHB No 62,000.002,400.00pcs.7.0016,800.00CHB No 41,300.001,560.00pcs.5.007,800.0032. Plastering*0.00.0Cement45.0054.00bags150.008,100.00Sand3.805.00cu.m.300.001,500.0033. Floor Toppings*0.00.0Cement35.1442.00bags150.006,300.00Sand3.905.00cu.m.280.001,400.0034. Tile Works*0.00.04"x4" tiles200.00240.00pcs.10.002,400.008"x8" tiles700.00840.00pcs.25.0021,000.0012" x 12" tiles1,335.001,602.00pcs.45.0072,090.00Tile Adhesive :450.00540.00kgs.10.005,400.00Tile Grout :30.0036.00kgs.26.00936.00Tile Trim :5.006.00pcs.105.00630.0035. Other Finishing works*0.00.0Cement40.5849.00bags150.007,350.00Sand0.501.00cu.m.300.00300.00Bricks3,470.004,164.00pcs.4.0016,656.000.00.0IV. THERMAL & MOISTURE PROTECTION*0.00.080,503.0041. Roof Framing*0.00.02x4 C-Purlins :30.0036.00pcs.160.005,760.00L40x40x6mm60.0072.00pcs.350.0025,200.00L30x30x6mm30.0036.00pcs.280.0010,080.00Welding Rod :32.0038.00kgs.25.00950.00Steel Plate :10.0012.00pcs.30.00360.00Anchor Bolt :20.0024.00pcs.80.001,920.00Sag Rod :16.0019.00pcs.60.001,140.0042. Water Proofing*0.00.0G.I. Corr. Sheet for Top Roof:90.00108.00pcs.260.0028,080.00Ridge Roll :11.9014.00pcs.130.001,820.00Valley Roll :3.815.00pcs.120.00600.00Fascia Board :28.5734.00pcs.64.002,176.00Tekscrew ;900.001,080.00pcs.1.001,080.00G.I. Gutter :15.1118.00pcs.69.001,242.00Silicon Sealant :1.001.00pcs.95.0095.000.00.0V. CARPENTRY WORKS*0.00.064,370.0051. Ceiling*0.00.0Ficem Board44.1053.00pcs.210.0011,130.00Carrying Channel116.42140.00pcs.80.0011,200.00Furring Channel232.83279.00pcs.60.0016,740.00Hunger63.5076.00pcs.15.001,140.00Flat Head Screw800.00960.00pcs.2.001,920.0052. Stair & Railing*0.00.0Handrails8.0010.00ln.m.300.003,000.00Metal Railing77.4793.00sq.m.200.0018,600.00Expansion Bolt13.0016.00pcs.40.00640.000.00.0VI. DOORS & WINDOWS0.00.048,805.0061. Doors0.00.0Panel Door1.001.00set10,000.0010,000.00Flush Door6.007.00set1,500.0010,500.00Door Jambs7.008.00set500.004,000.00Hinges21.0025.00set35.00875.00Lockset (main Door)1.001.00set280.00280.00Lockset Ordinary6.007.00set150.001,050.0062. Windows0.00.0Window Frames17.0020.00sq.m.1,000.0020,000.00Window Glass17.0020.00sq.m.105.002,100.000.00.0VII. ELECTRICAL WORKS0.00.050,000.000.00.0VIII. PLUMBING WORKS0.00.060,115.001. Plumbing Rough-ins0.00.0PVC Pipe 1" x109.0011.00pcs.200.002,200.00PVC Elbow 1"5.006.00pcs.10.0060.00PVC Elbow Reducer 1"x3/4"2.002.00pcs.10.0020.00PVC. Tee 1"1.001.00pcs.15.0015.00PVC. Tee Reducer 1"x3/4"8.0010.00pcs.15.00150.00PVC Coupling 1"10.0012.00pcs.10.00120.00PVC Pipe 3/4 x105.006.00pcs.120.00720.00PVC Elbow 3/49.0011.00pcs.10.00110.00PVC. Tee 3/42.002.00pcs.15.0030.00PVC Solvent Cement5.006.00pcs.50.00300.00PVC Pipe 50mm8.0010.00pcs.220.002,200.00PVC Pipe 100mm9.0011.00pcs.250.002,750.00PVC Elbow #41.001.00pcs.20.0020.00PVC Elbow #23.004.00pcs.15.0060.00PVC Tee 4x22.002.00pcs.20.0040.00PVC Tee 4x43.004.00pcs.20.0080.00PVC P-Trap#27.008.00pcs.100.00800.00PVC C.O. w/ Adopter #42.002.00pcs.100.00200.002. Plumbing Finishing0.00.03/4 H & Brass Faucet7.008.00pcs.80.00640.00Water Closet2.002.00sets5,000.0010,000.00Lavatory Closet2.002.00sets2,000.004,000.00Lavatory w/ Fittings4.005.00sets500.002,500.00Floor Drain 4x42.002.00pcs.50.00100.00Tel. Shower Head w/ Valve2.002.00sets500.001,000.00Kitchen Sink1.001.00sets5,000.005,000.00Tissue Holder2.002.00sets500.001,000.00Soap Holder2.002.00sets500.001,000.00Towei Bar2.002.00pcs.1,500.003,000.00Curtain Rod 3/4 x 1.252.002.00pcs.1,000.002,000.00Bathtub1.001.00pcs.20,000.0020,000.00IX. PAINTING0.00.034,790.001. Concrete0.00.0Concrete Neutralizer5.006.00gal.50.00300.00Flat Latex for Primer8.0010.00gal.350.003,500.00Acritex Cast16.0019.00gal.400.007,600.00Flat Latex for Int. 2nd & 3rd coat10.0012.00gal.350.004,200.00Semi Gloss Latex for Ext. 2nd & 3rd coat6.007.00gal.380.002,660.00Sanding Paper #18040.0048.00pcs.20.00960.002. Wood0.00.0Flat Wall Enamel10.0012.00gal.400.004,800.00Glazing Putty8.0010.00gal.350.003,500.00Quick Dry Enamel15.0018.00gal.350.006,300.00Paint Thinner0.501.00gal.80.0080.003. Metal0.00.0Red Oxide Primer1.001.00gal.190.00190.00Quick Dry Enamel2.002.00gal.250.00500.00Sanding Paper #1806.007.00pcs.20.00140.00Paint Thinner1.001.00gal.60.0060.00MATERIAL COST:726,850.00LABOR COST:254,397.50TOTAL PROJECT COST:981,247.50

Recovered_Sheet510. Site Preparation/RestorationMatlUnitTOTAL11121314151617CodeMaterialsUnitPriceQTY.AMOUNTStaking/LayoutExcavationGravel BeddingSoil PoisoningBackfillingDemolitionLot Levellingfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amount1. Coco Lumberbd.ft.9.000.00.01.000.00.00.00.00.00.00.00.04. Good Lumberbd.ft.25.00243.006,075.001.00243.006,075.000.00.00.00.00.00.02.1 CWN No. 1kgs.25.000.00.01.000.00.00.00.00.00.00.00.02.2 CWN No. 2kgs.30.000.9027.001.000.9027.000.00.00.00.00.00.02.3 CWN No. 3kgs.30.000.9027.001.000.9027.000.00.00.00.00.00.03. Nylon Stringln.m.1.0050.6050.601.0050.6050.600.00.00.00.00.00.04. Soil treatment chem.li.300.001.20360.000.00.00.01.001.20360.000.00.00.05. Excess/barrowcu.m.50.000.4020.000.00.00.00.01.000.4020.000.00.06. Gravel G1cu.m.350.006.002,100.000.00.01.006.002,100.000.00.00.00.0TOTAL :8,659.606,179.600.02,100.00360.0020.000.00.0

Recovered_Sheet620. Concreting WorksMatlUnitTOTAL21222324252626CodeMaterialsUnitPriceQTY.AMOUNTFoundationColumnBeamsSuspended SlabSlab on FillService EntranceStairsfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amount1. Lumberbd.ft.8.00123.85990.821.000.01.0066.91535.301.0056.94455.531.000.00.01.000.01.000.01.000.00.02. Form plypcs.120.0022.572,708.601.000.01.0011.101,332.101.0011.471,376.501.000.00.01.000.01.000.01.000.00.03.1 CWN No. 1kgs.25.002.2656.431.000.01.001.1127.751.001.1528.681.000.00.01.000.01.000.01.000.00.03.2 CWN No. 2kgs.30.007.03210.971.000.01.001.3440.151.005.69170.821.000.00.01.000.01.000.01.000.00.03.3 CWN No. 3kgs.30.007.37221.011.000.01.001.6750.181.005.69170.821.000.00.01.000.01.000.01.000.00.04.1 RSB No. 10pcs42.000.00.01.000.00.01.00271,134.001.0026.001,092.001.000.00.01.000.00.01.000.00.01.000.00.04.2 RSB No. 12pcs65.000.00.01.0058.253,786.251.000.00.01.000.00.01.000.00.01.0016.811,092.361.000.00.01.000.00.04.3 RSB No. 16pcs110.000.00.01.0000.01.0020.002,200.001.0020.672,273.331.000.00.01.000.01.000.01.000.00.05. Tie wire gauge 16kgs.35.0053.391,868.481.0025.38888.301.005.63196.881.005.58195.301.000.00.01.0016.80588.001.000.00.01.000.00.06. Cementbags125.00147.4718,433.131.0063.457,931.251.0016.882,109.381.0016.742,092.501.000.00.01.0050.406,300.001.000.00.01.000.00.07. Sandcu.m.280.008.902,491.301.004.231,184.401.000.94262.501.000.93260.401.000.00.01.002.80784.001.000.00.01.000.00.08.1 Gravel G1cu.m.350.0023.288,146.251.0010.203,570.001.001.88656.251.000.01.000.01.0011.203,920.001.000.00.01.000.08.1 Gravel 3/4cu.m.450.001.86837.001.000.01.000.01.001.86837.001.000.00.01.000.01.000.01.000.00.09. Steel Decksq.m.200.000.00.01.001.001.001.000.00.01.001.001.00TOTAL :0.017,360.208,544.488,952.880.012,684.360.00.0

Recovered_Sheet730. Masonry Workssq.m.MatlUnitTOTAL3132333435363737CodeMaterialsUnitPriceQTY.AMOUNTBatterboardsCHB LayingPlasteringConc. MouldingsTileworksFloor AccentsOther Finishing WorksFloor Toppingsfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amount1. Good Lumbercu.m.20.000.00.01.000.00.01.000.01.000.01.000.01.000.01.000.01.000.01.000.02. Form plysq.m.120.000.00.01.000.01.000.01.000.01.000.01.000.01.000.01.000.01.000.03.1 Concrete Nailkgs.25.000.00.01.000.00.01.000.01.000.01.000.01.000.01.000.01.000.01.000.03.2 CWN No. 2kgs.30.000.00.01.000.01.000.01.000.01.000.01.000.01.000.01.000.01.000.03.3 CWN No. 3kgs.30.000.00.01.000.01.000.01.000.01.000.01.000.01.000.01.000.01.000.04.1 RSB No. 10kgs.42.0061.662,589.771.000.01.0061.662,589.771.000.01.000.01.000.01.000.01.000.01.000.04.2 RSB No. 12kgs.65.000.00.01.000.01.000.01.000.01.000.01.000.01.000.01.000.01.000.04.3 RSB No. 16kgs.110.000.00.01.000.01.000.01.000.01.000.01.000.01.000.01.000.01.000.05. Tie wire gauge 16kgs.30.005.50165.001.000.01.005.50165.001.000.01.000.01.000.01.000.01.000.01.000.06. Cementbags125.00184.7123,088.671.000.01.0091.9111,488.751.0052.226,528.001.000.01.000.01.000.01.0040.585,071.921.004.032504.007. Sandcu.m.250.0012.443,109.151.000.01.007.661,914.151.004.361,091.001.000.01.000.01.000.01.000.42104.001.000.448112.008. Gravel 3/4cu.m.450.000.00.01.000.01.000.01.000.01.000.01.000.01.000.01.000.01.000.09.1 CHB No 6pcs6.50875.005,687.501.000.01.00875.005,687.501.000.01.000.01.000.01.000.01.000.01.000.09.2 CHB No 4pcs4.50500.002,250.001.000.01.00500.002,250.001.000.01.000.01.000.01.000.01.000.01.000.010.1 4"x4" tilespcs9.00200.001,800.001.000.01.000.01.000.01.000.01.00200.001,800.001.000.01.000.01.000.010.2 8"x8" tilespcs20.00700.0014,000.001.000.01.000.01.000.01.000.01.00700.0014,000.001.000.01.000.01.000.010.3 12" x 12" tilespcs31.001,333.3341,333.331.000.01.000.01.000.01.000.01.001,333.3341,333.331.000.01.000.01.000.010.4 16" x 16" tilespcs45.000.00.01.000.01.000.01.000.01.000.01.000.00.01.000.01.000.01.000.011. 12"x12" Vinyl Tilespcs8.000.00.01.000.01.000.01.000.01.000.01.000.00.01.000.01.000.01.000.012. Concrete Moldingln.m.175.000.00.01.000.01.000.01.000.01.000.00.01.000.01.000.01.000.01.000.013.Tile Adhesive :kgs.50.00450.0022,500.001.000.01.000.01.000.01.000.01.00450.0022,500.001.000.01.000.01.000.014. Tile Grout :kgs.26.0030.00780.001.000.01.000.01.000.01.000.01.0030.00780.001.000.01.000.01.000.015. Tile Trim :pcs.105.000.00.01.000.01.000.01.000.01.000.01.000.00.01.000.01.000.01.000.016. Rugby :li.34.000.00.01.000.01.000.01.000.01.000.01.000.00.01.000.01.000.01.000.017. Pebble Wash-Outcu.m.600.000.48285.001.000.01.000.01.000.01.000.01.000.01.000.01.000.48285.001.000.017. Brickspcs.2.503,466.678,666.671.000.01.000.01.000.01.000.01.000.01.000.01.003,466.678,666.671.000.018. Rabblespcs.3.000.00.01.000.01.000.01.000.01.000.01.000.01.000.01.000.00.01.000.0TOTAL :126,255.080.024,095.177,619.000.080,413.330.014,127.58616.00

Recovered_Sheet840. Thermal & Moisture ProtectionMatlUnitTOTAL4142CodeMaterialsUnitPriceQTY.AMOUNTRoof FramingWater Proofingfactorqty.amountfactorqty.amount2x4 C-Purlins :pcs.125.0041.905,238.101.0041.905,238.101.000.02x6 C-Rafters :pcs.250.0014.243,560.591.0014.243,560.591.000.0Welding Rod :kgs.25.0032.00800.001.0032.00800.001.000.0Steel Plate :pcs.30.0010.00300.001.0010.00300.001.000.0Anchor Bolt :pcs.80.0020.001,600.001.0020.001,600.001.000.0Sag Rod :pcs.60.0016.00960.001.0016.00960.001.000.0G.I. Corr. Sheet for Top Roof:pcs.150.0090.0013,500.001.000.01.0090.0013,500.00Ridge Roll :pcs.130.0011.901,547.621.000.01.0011.901,547.62Valley Roll :pcs.120.003.81457.141.000.01.003.81457.14Flashing Sheet :pcs.90.000.00.01.000.01.000.00.0Fascia Board :pcs.64.0028.571,828.571.000.01.0028.571,828.57Tekscrew ;pcs.1.00900.00900.001.000.01.00900.00900.00G.I. Gutter :pcs.69.0015.111,042.671.000.01.0015.111,042.67Silicon Sealant :pcs.95.000.00.01.000.01.000.00.0Flat Tiles :pcs.20.000.00.01.000.01.000.00.0Down End :pcs.35.000.00.01.000.01.000.00.0Right Hand Barge :pcs.35.000.00.01.000.01.000.00.0Left hand Barge :pcs.35.000.00.01.000.01.000.00.0Ridge Tiles :pcs.25.000.00.01.000.01.000.00.0G.I. Corr. Roofing Sheet :pcs.120.000.00.01.000.01.000.00.0Metal Battens :pcs.60.000.00.01.000.01.000.00.0Valley Roll :pcs.45.000.00.01.000.01.000.00.0Flashing Sheet :pcs.45.000.00.01.000.01.000.00.0Fascia Board :pcs.120.000.00.01.000.01.000.00.0Fascia Screw :pcs.1.000.00.01.000.01.000.00.0Ripper Screw:pcs.1.500.00.01.000.01.000.00.0Tekscrew ;pcs.0.500.00.01.000.01.000.00.0Battens Screw :pcs.0.750.00.01.000.01.000.00.0Asphalt Shingles:pcs.150.000.00.01.000.01.000.00.0Asphalt Filler:sq.m70.000.00.01.000.01.000.00.0Marine Plywood:pcs.130.000.00.01.000.01.000.00.0CWN #1:kgs.30.000.00.01.000.01.000.00.0Tekscrew :pcs.1.000.00.01.000.01.000.00.0TOTAL31,734.6912,458.6919,276.00

Recovered_Sheet950 Carpentry WorksMatlUnitTOTAL515252535455CodeMaterialsUnitPriceQTY.AMOUNTPartition WallInterior CeilimgExterior CeilingStairs & RailingCabinets & ClosetsBaserboard & Cornicesfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amountFicem Boardpcs.190.000.00.01.000.00.01.001.000.01.000.01.000.01.000.0Gypsum Boardpcs.260.000.00.01.000.00.01.001.000.01.000.01.000.01.000.0Metal Studpcs.140.000.00.01.000.00.01.001.000.01.000.01.000.01.000.0Blind Rivetpcs.2.000.00.01.000.00.01.001.000.01.000.01.000.01.000.0Flat Head Screwpcs.1.500.00.01.000.00.01.001.000.01.000.01.000.01.000.0Ficem Boardpcs.190.0044.108,378.471.000.01.001.0044.108,378.471.000.01.000.01.000.0Gypsum Boardpcs.260.000.00.01.000.01.001.000.00.01.000.01.000.01.000.0Carrying Channelpcs.80.00116.429,313.331.000.01.001.00116.429,313.331.000.01.000.01.000.0Furring Channelpcs.60.00232.8313,970.001.000.01.001.00232.8313,970.001.000.01.000.01.000.0Hungerpcs.15.0063.50952.501.000.01.001.0063.50952.501.000.01.000.01.000.0Flat Head Screwpcs.6.00881.945,291.671.000.01.001.00881.945,291.671.000.01.000.01.000.0Handrailsln.m.300.008.002,400.001.000.01.001.000.01.008.002,400.001.000.01.000.0Metal Railingsq.m.200.0077.4715,494.401.000.01.001.000.01.0077.4715,494.401.000.01.000.0Expansion Boltpcs.40.0013.00520.001.000.01.001.000.01.0013.00520.001.000.01.000.01.00Ventspcs.240.000.00.01.000.01.001.000.00.01.000.01.000.01.000.0Baseboardpcs.125.000.00.01.000.01.001.000.01.000.01.000.01.000.00.0Cornicespcs.110.000.00.01.000.01.001.000.01.000.01.000.01.000.00.0Wood Glueli.35.000.00.01.000.01.001.000.01.000.01.000.01.000.00.0Cabinetsset2,000.000.00.01.000.01.001.000.01.000.01.000.00.01.000.0Closetsset2,500.000.00.01.000.01.001.000.01.000.01.000.00.01.000.0Expansion Boltpcs.40.000.00.01.000.01.001.000.01.000.01.000.00.01.000.0TOTAL :0.00.037,905.9718,414.400.0

Recovered_Sheet1060. Doors & WindowsMatlUnitTOTAL6162CodeMaterialsUnitPriceQTY.AMOUNTWindowsDoorsfactorqty.amountfactorqty.amountPanel Doorset2,500.001.002,500.001.001.002,500.001.000.0Flush Doorset1,800.006.0010,800.001.006.0010,800.001.000.0Door Jambsset500.007.003,500.001.007.003,500.001.000.0Hingesset35.0021.00735.001.0021.00735.001.000.0Lockset (main Door)set280.001.00280.001.001.00280.001.000.0Lockset Ordinaryset150.006.00900.001.006.00900.001.000.0Window Framessq.m.175.0017.002,975.001.000.01.0017.002,975.00Window Glasssq.m.105.0017.001,785.001.000.01.0017.001,785.00TOTAL :21,690.0018,715.002,975.00

Recovered_Sheet1170. Electrical WorksMatlUnitTOTAL7172CodeMaterialsUnitPriceQTYAMOUNTRough-insFinishingfactorqty.amountfactorqty.amount1. Circuit Breaker 20A (2 Poles)0.00.01.000.01.000.02. Circuit Breaker 30A0.00.01.000.01.000.03. Circuit Breaker 40A0.00.01.000.01.000.04. Circuit Breaker 100A0.00.01.000.01.000.05. Panel Board 12 Branches 100A0.00.01.000.01.000.06. 15mm Polyflex0.00.01.000.01.000.07. 20mm Polyflex0.00.01.000.01.000.08. IMC Pipe 25mm x 10mm0.00.01.000.01.000.09. THW 8.0 mm.sq.0.00.01.000.01.000.010. L.B. Conduit #10.00.01.000.01.000.011. Porcelain Split Knobs0.00.01.000.01.000.012. G.I. Bushing #10.00.01.000.01.000.013. 65mm C Clamp0.00.01.000.01.000.014. Electrical Tape (big)0.00.01.000.01.000.015. Utility Box (2x2x4)0.00.01.000.01.000.016. Cut Out Box (4x4)0.00.01.000.01.000.017. One Way Gang Switch (100 watts)0.00.01.000.01.000.018. One Way Two Gang Switch (100 Watts)0.00.01.000.01.000.019. One Gang Three Way Switch (100 Watts)0.00.01.000.01.000.020. Two Gang C.O. - (200 Watts)0.00.01.000.01.000.021. Two Gang C.O. W.P. - (200 Watts)0.00.01.000.01.000.022. One Gang C.O. Ref - (800 Watts)0.00.01.000.01.000.023. One Gang C.O. Range (800 Watts)0.00.01.000.01.000.024. One Gang C.O. - ACU (1.5 Hp)0.00.01.000.01.000.025. Porcelain Socket 2x20.00.01.000.01.000.0TOTAL :0.00.00.0

Recovered_Sheet1280 Pumbing WorksMatlUnitTOTAL81828181CodeMaterialsUnitPriceQTY.AMOUNTWater LinesSanitary LinesPlumbing FixturesSeptic Tankfactorqty.amountfactorqty.amountfactorqty.amountfactorqty.amount1. PVC Pipe 3/4 x100.00.00.00.00.00.02. PVC Elbow 3/40.00.00.00.00.00.03. PVC. Tee 3/40.00.00.00.00.00.04. PVC Coupling 3/40.00.00.00.00.00.05. PVC Solvent Cement0.00.00.00.00.00.06. Tefpon Tape0.00.00.00.00.00.07. G.I. Nipple 3/4x60.00.00.00.00.00.08. G.I. Coupling 3/4 x 1/20.00.00.00.00.00.09. GI. End Cap 1/20.00.00.00.00.00.010. PVC Pipe 50mm0.00.00.00.00.00.011. PVC Pipe 100mm0.00.00.00.00.00.012. PVC 1/4 Bend #20.00.00.00.00.00.013. PVC Tee 4x20.00.00.00.00.00.014. PVC Wye 4x20.00.00.00.00.00.015. PVC P-Trap#20.00.00.00.00.00.016. PVC C.O. w/ Adopter #40.00.00.00.00.00.017. PVC Solvent Cement0.00.00.00.00.00.018. 3/4 H & Brass Faucet0.00.00.00.00.00.019. Water Closet0.00.00.00.00.00.020. Lavatory w/ Fittings0.00.00.00.00.00.021. Floor Drain 4x40.00.00.00.00.00.022. N.P. Faucet 1/2x60.00.00.00.00.00.023. Tel. Shower Head w/ Valve0.00.00.00.00.00.024. Kitchen Sink0.00.00.00.00.00.025. Tissue Holder0.00.00.00.00.00.026. Soap Holder0.00.00.00.00.00.027. Towei Bar0.00.00.00.00.00.028. Curtain Rod 3/4 x 1.250.00.00.00.00.00.0

Recovered_Sheet1390 Painting WorksMatlUnitTotal91.0092.0093.00CodeMaterialsUnitPriceQTYAMOUNTConcreteWoodMetalfactorqty.amountfactorqty.amountfactorqty.amountConcrete Neutralizergal.50.007.90395.001.007.90395.001.000.01.000.0Flat Latex for Primergal.300.007.902,370.001.007.902,370.001.000.01.000.0Acritex Castgal.350.0015.805,530.001.0015.805,530.001.000.01.000.0Flat Latex for Int. 2nd & 3rd coatgal.300.0015.804,740.001.0015.804,740.001.000.01.000.0Semi Gloss Latex for Ext. 2nd & 3rd coatgal.320.000.00.01.000.00.01.000.01.000.0Sanding Paper #180pcs.20.0039.50790.001.0039.50790.001.000.01.000.0Flat Wall Enamelgal.290.004.881,415.201.000.01.004.881,415.201.000.0Glazing Puttygal.270.004.071,098.001.000.01.004.071,098.001.000.0Quick Dry Enamelgal.250.009.762,440.001.000.01.009.762,440.001.000.0Paint Thinnergal.80.001.46117.121.000.01.001.46117.121.000.0Wood Bleachgal.150.000.00.01.000.01.000.00.01.000.0Oil Wood Staingal.280.000.00.01.000.01.000.00.01.000.0Sanding Sealergal.230.000.00.01.000.01.000.00.01.000.0Flat Laquergal.90.000.00.01.000.01.000.00.01.000.0Sanding Paper #100pcs.25.000.00.01.000.01.000.00.01.000.0Red Oxide Primergal.190.001.33253.331.000.01.000.01.001.33253.33Quick Dry Enamelgal.250.001.33333.331.000.01.000.01.001.33333.33Sanding Paper #180pcs.20.006.67133.331.000.01.000.01.006.67133.33Paint Thinnergal.60.000.4024.001.000.01.000.01.000.4024.00Total19,639.3213,825.005,070.32744.00

Recovered_Sheet14Compatibility Report for ESTIMATES Garage.xlsRun on 8/21/2011 8:51The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when you save this workbook in an earlier file format.Minor loss of fidelity# of occurrencesSome formulas in this workbook are linked to other workbooks that are closed.When these formulas are recalculated in earlier versions of Excel without opening the linked workbooks, characters beyond the 255-character limit cannot be returned.2'Decrease'!E4'Increase'!E4

'Decrease'!E4'Increase'!E4