12
Type Series Booklet 1220.5-10 G3 Etanorm SYA General Member of DIN EN ISO 9001 Thermal Oil / Hot Water Pumps Fields of Application Etanorm SYA pumps are used in heat transfer systems (DIN 4754) or in hot water circulation systems. Operating Data Thermal oil Hot water Q H up to 660 m 3 /h, 183 l/s up to 102 m t -30 C up to +350 °C up to +180 °C p 2 1) up to 16 bar 1) see pressure/temperature limits, page 5 Design Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, with bearing bracket, in back pull-out design. Volute casing and impeller with replaceable wear rings. Volute casing with integrally cast pump feet. Bearings Coupling side: grease-lubricated deep-groove ball bearing Impeller side: product-lubricated carbon bearing Shaft Seal Mechanical seal to DIN 24960 Materials Volute casing Nodular cast iron JS1025 2) Discharge cover Nodular cast iron JS1025 2) Shaft Chrome steel 1.4021.05 HRC 55 Impeller Grey cast iron JL1040 3) Casing wear rings Grey cast iron GG Bearing bracket Nodular cast iron JS1025 2) 2) to EN 1563: GJS-400-18-LT 3) to EN 1561: GJL-250 Designation EN 80 - 160 66 (6239) S Y A Type series Etanorm Pump size, e.g. Actual impeller diameter - 100 mm, e.g. 166 mm = (impellers with inclined cut back vane tips, e.g. Etanorm 80-160 actual diameter 162/139 mm)= Casing material nodular cast iron JS1025 2) Thermal oil/Hot water variant Accessories Drive 4) Surface-cooled KSB-IEC three-phase squirrel cage motor Winding: up to 2.2 kW 220-240 V/380-420 V for 3 kW and above 380-420 V/660-725 V Design: IM B3 Enclosure: IP 55 Thermal class: F with temperature sensors: 3 PTC thermistors Operating mode: continuous operation S1 or surface-cooled three-phase squirrel cage motor as described above, but West European brand to KSB’s choice. Coupling Flexible coupling with/without spacer sleeve Contact guard Coupling guard as per EN 294. Baseplate Sectional steel / folded steel plate for the complete unit (pump and motor) in torsion-resistant design 4) If the electric motor is supplied by the customer, the cooling air must flow in axial direction towards the pump side! Air velocity 3 m/s, measured at the drive-end bearing end plate

Etanorm SYA - DigitalOcean

  • Upload
    others

  • View
    32

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Etanorm SYA - DigitalOcean

Type Series Booklet1220.5-10 G3 Etanorm SYA

General Member ofDIN EN ISO 9001

Thermal Oil /Hot Water Pumps

Fields of ApplicationEtanorm SYA pumps are used in heat transfer systems(DIN 4754) or in hot water circulation systems.

Operating DataThermal oil Hot water

QH

up to 660 m3/h, 183 l/sup to 102 m

t -30 C up to +350 °C up to +180 °Cp2

1) up to 16 bar1) see pressure/temperature limits, page 5

DesignHorizontal volute casing pump, single-stage, with ratings andmain dimensions to EN 733, with bearing bracket, in backpull-out design.Volute casing and impeller with replaceable wear rings.Volute casing with integrally cast pump feet.

BearingsCoupling side: grease-lubricated deep-groove ball bearingImpeller side: product-lubricated carbon bearing

Shaft SealMechanical seal to DIN 24960

MaterialsVolute casing Nodular cast iron JS1025 2)

Discharge cover Nodular cast iron JS1025 2)

Shaft Chrome steel 1.4021.05 HRC 55Impeller Grey cast iron JL1040 3)

Casing wear rings Grey cast iron GGBearing bracket Nodular cast iron JS1025 2)

2) to EN 1563: GJS-400-18-LT3) to EN 1561: GJL-250

DesignationEN 80 - 160 66 (6239) S Y A

Type series EtanormPump size, e.g.Actual impeller diameter - 100 mm,e.g. 166 mm =(impellers with inclined cut back vane tips, e.g.Etanorm 80-160 actual diameter 162/139 mm)=Casing material nodular cast iron JS1025 2)

Thermal oil/Hot water variant

AccessoriesDrive 4)

Surface-cooled KSB-IEC three-phase squirrel cage motorWinding: up to 2.2 kW 220-240 V/380-420 V

for 3 kW and above 380-420 V/660-725 VDesign: IM B3Enclosure: IP 55Thermal class: F with temperature sensors: 3 PTC

thermistorsOperating mode: continuous operation S1orsurface-cooled three-phase squirrel cage motor as describedabove, but West European brand to KSB’s choice.CouplingFlexible coupling with/without spacer sleeveContact guardCoupling guard as per EN 294.BaseplateSectional steel / folded steel plate for the complete unit (pumpand motor) in torsion-resistant design4) If the electric motor is supplied by the customer, the cooling air must flow

in axial direction towards the pump side!Air velocity ≥ 3 m/s, measured at the drive-end bearing end plate

Page 2: Etanorm SYA - DigitalOcean

1) Ergänzungsgrößen in EN 733 nicht enthalten1) Supplementary sizes not included in EN 7331) Les tailles complémentaires ne sont pas couvertes par EN 733

1) Grandezze supplementari non incluse in EN 7331) Aanuullende grootten niet in EN 733 inbegrepen

1) Tamaños suplementarios no incluídos en EN 733

Etan

orm

SYA

2 n=

29001/m

in

Page 3: Etanorm SYA - DigitalOcean

1215:4054/3

1) Ergänzungsgrößen in EN 733 nicht enthalten1) Supplementary sizes not included in EN 7331) Les tailles complémentaires ne sont pas couvertes par EN 733

1) Grandezze supplementari non incluse in EN 7331) Aanuullende grootten niet in EN 733 inbegrepen

1) Tamaños suplementarios no incluídos en EN 733

Etan

orm

SYA3

n=

14501/m

in

Page 4: Etanorm SYA - DigitalOcean

Connecting dimen-sions and power rat-ings to EN 733

Casing wear ringsservice-friendly, nowear on the casing/impeller

Impeller with optimizedhydraulics, excellent effi-ciencies

Back pull-out design:easy dismantling, thecasing may remain inthe pipeline when thepump is dismantled

Hydraulically balancedimpellers, little axialthrust on the shaft bear-ings, long service life

Product-lubricated anti-seizecarbon bearing, high operatingreliability

Support footrigid and firm, even in caseof high external loads theshaft is only slightly dis-placed in the coupling area.

Reliable standardizedmechanical seal,maintenance-free

Robust deep-grooveball bearing, grease-lubricated, for a longservice life

No cooling water required,long cooling-down distances,large cooling fins

Long distance betweenbearings, low bearing loadsand operating temperatures,long bearing life

Pressure boundary designedfor 16 bar, made of nodularcast iron

Etanorm SYA

4

Benefits at a glance

Page 5: Etanorm SYA - DigitalOcean

Etanorm SYA

5

Medium handled Application limits 1) MaterialsCasing/Impeller

Shaft sealMechanical seal

Reference code Notes

Nodular cast iron /Grey cast iron

AQ1VGG

S 8

Hot water 2) t ≤ +180 Cp ≤ 16 bar

x x SYA 8

Thermal oil onmineral oil basis

t ≤ -30 up to +350 Cp ≤ 16 bar

x x SYA 8

Thermal oil 3) onsynthetic basis

t ≤ -30 up to +350 Cp ≤ 16 bar

x x SYA 8

1) Inlet pressure must not fall below atmospheric pressure.2) Low-salt or fully desalinated water to VdTÜV-specification/AGFW-specification TCN 1466 (VdTÜV) 5/15 (AGFW) edition 02.893) Pumps not suitable for handling synthetic heat transfer media of the diphenyl group

Pressure and Temperature LimitsEtanorm SYA Product temperature Inlet pressure p1 ≥ 1 bar Discharge pressure p2

4)

Thermal oil -30 up to +350 C up to 10 bar up to 16 bar

Hot water up to +180 C up to 12 bar 5) up to 16 bar

4) The sum of inlet pressure and head at zero flow point must not exceed 16 bar or the values given in the diagram.5) Etanorm SYA 150-315 and 150-400: up to 10 bar

Pressure/temperature diagram for flanges to EN 1092-2

Page 6: Etanorm SYA - DigitalOcean

M

Etanorm SYA

6

Etanorm SYA 32-125.1 -- 40-200

Tolerances of connecting dimensions as per EN 735

mmEtanorm

SYAIP 55

SYA 2900 1450

1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x

32-125.1 0.550.751.11.52.2

--0.55

------

71808090 S90 L

5050505050

3232323232

8080808080

450450450450450

240240240240240

300300300300300

360360360360360

212212212212212

140140140140140

100100100100100

860860860860950

650650650650740

710710710710800

9509509509501050

740740740740840

800800800800900

100100100100100

32-160.1 --1.52.23.0

0.55------

8090 S90 L

100 L

50505050

32323232

80808080

450450450450

240240240240

300300300300

360360360360

232232232232

160160160160

100100100100

8608609501050

650650740840

710710800900

95095010501150

740740840940

8008009001000

100100100100

32-200.1 ----

3.04.05.5

0.550.75

------

8080

100 L112 M132 S

5050505050

3232323232

8080808080

450450450450450

240240240240240

300300300300300

360360360360360

260260260260260

180180180180180

100100100100100

860860105010501050

650650840840840

710710900900900

950950115011501150

740740940940940

800800100010001000

100100100100100

32-160 --2.23.04.0

0.55------

8090 L

100 L112 M

50505050

32323232

80808080

450450450450

240240240240

300300300300

360360360360

232232232232

160160160160

100100100100

86095010501050

650740840840

710800900900

950105011501150

740840940940

80090010001000

100100100100

32-200 ------

4.05.57.511.0

0.550.751.1--------

808090 S

112 M132 S132 S160 M

50505050505050

32323232323232

80808080808080

450450450450450450500

240240240240240240280

300300300300300300350

360360360360360360360

260260260260260260260

180180180180180180180

100100100100100100100

8608608601050105010501270

6506506508408408401060

7107107109009009001120

9509509501150115011501270

7407407409409409401060

8008008001000100010001120

100100100100100100100

32-250 ------

7.511.015.0

1.11.52.2------

90 S90 L

100 L132 S160 M160 M

505050505050

323232323232

100100100100100100

500500500500500500

280280280280280280

350350350350350350

360360360360360360

280280280280280280

225225225225225225

112112112112112112

105010501050105012701270

84084084084010601060

90090090090011201120

105010501050115012701270

84084084094010601060

900900900100011201120

100100100100100100

40-160 ------

3.04.05.57.5

0.550.751.1--------

808090 S

100 L112 M132 S132 S

65656565656565

40404040404040

80808080808080

450450450450450450450

240240240240240240240

300300300300300300300

360360360360360360360

232232232232232232232

160160160160160160160

100100100100100100100

8608608601050105010501050

650650650840840840840

710710710900900900900

9509509501150115011501150

740740740940940940940

8008008001000100010001000

100100100100100100100

40-200 ------

5.57.511.0

0.751.11.5------

8090 S90 L

132 S132 S160 M

656565656565

404040404040

100100100100100100

450450450450450500

240240240240240280

300300300300300350

360360360360360360

260260260260260260

180180180180180180

100100100100100100

860860950105010501270

6506507408408401060

7107108009009001120

9509501050115011501270

7407408409409401060

800800900100010001120

100100100100100100

DN = EN 1092-2/DN.../PN 16/21/JS1025/B

Page 7: Etanorm SYA - DigitalOcean

M

Etanorm SYA

7

Etanorm SYA 40-250 -- 65-200

Tolerances of connecting dimensions as per EN 735mm

EtanormSYA

IP 55ta oSYA 2900 1450

1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x

40-250 --------

11.015.018.522.0

1.11.52.23.0--------

90 S90 L

100 L100 L160 M160 M160 L180 M

6565656565656565

4040404040404040

100100100100100100100100

500500500500500500500550

280280280280280280280320

350350350350350350350400

360360360360360360360360

280280280280280280280290

225225225225225225225225

112112112112112112112112

10501050105010501270127012701400

8408408408401060106010601190

9009009009001120112011201250

10501050105010501270127014001400

8408408408401060106011901190

9009009009001120112012501250

100100100100100100100100

40-315 --------

2.23.04.05.5

100 L100 L112 M132 S

65656565

40404040

125125125125

500500500500

280280280280

350350350350

470470470470

325325325325

250250250250

112112112112

1050105011501150

840840940940

90090010001000

1150115012701270

94094010601060

1000100011201120

100100100100

50-160 ------

5.57.511.0

0.751.11.5------

8090 S90 L

132 S132 S160 M

656565656565

505050505050

100100100100100100

450450450450450500

240240240240240280

300300300300300350

360360360360360360

260260260260260260

180180180180180180

100100100100100100

860860950105010501270

6506507408408401060

7107108009009001120

9509501050115011501270

7407408409409401060

800800900100010001120

100100100100100100

50-200 ------

11.015.018.522.0

1.52.23.0--------

90 L100 L100 L160 M160 M160 L180 M

65656565656565

50505050505050

100100100100100100100

450450450500500500550

240240240280280280320

300300300350350350400

360360360360360360360

260260260260260260290

200200200200200200200

100100100100100100100

950105010501270127012701400

7408408401060106010601190

8009009001120112011201250

1050115011501270127014001400

8409409401060106011901190

900100010001120112012501250

100100100100100100100

50-250 ------

15.018.522.030.0

2.23.04.0--------

100 L100 L112 M160 M160 L180 M200 L

65656565656565

50505050505050

100100100100100100100

500500500500500550550

280280280280280320320

350350350350350400400

360360360360360360360

280280280280280290310

225225225225225225225

112112112112112112112

1050105010501270127014001400

8408408401060106011901190

9009009001120112012501250

1050105010501270140014001400

8408408401060119011901190

9009009001120125012501250

100100100100100100100

50-315 --------

3.04.05.57.5

100 L112 M132 S132 M

65656565

50505050

125125125125

500500500500

280280280280

350350350350

470470470470

325325325325

280280280280

112112112112

1050115011501270

8409409401060

900100010001120

1150127012701270

940106010601060

1000112011201120

100100100100

65-160 ------

7.511.015.0

1.11.52.2------

90 S90 L

100 L132 S160 M160 M

808080808080

656565656565

100100100100100100

450450450450500500

240240240240280280

300300300300350350

360360360360360360

260260260260260260

200200200200200200

112112112112112112

8609501050105012701270

65074084084010601060

71080090090011201120

95010501150115012701270

74084094094010601060

8009001000100011201120

100100100100100100

65-200 ------

15.018.522.030.0

2.23.04.0--------

100 L100 L112 M160 M160 L180 M200 L

80808080808080

65656565656565

100100100100100100100

500500500500500550550

280280280280280320320

350350350350350400400

360360360360360360360

280280280280280290310

225225225225225225225

112112112112112112112

1050105010501270127014001400

8408408401060106011901190

9009009001120112012501250

1150115011501400140014001400

9409409401190119011901190

1000100010001250125012501250

140140140140140140140

DN = EN 1092-2/DN.../PN 16/21/JS1025/B

Page 8: Etanorm SYA - DigitalOcean

Fig. A

Fig. B

M

Etanorm SYA

8

Etanorm SYA 65-250 -- 80-315

Tolerances of connecting dimensions as per EN 735mm

EtanormSYA

IP 55 Fig.EtanormSYA 2900 1450

1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x

65-250 ------

22.030.037.045.0

3.04.05.5--------

100 L112 M132 S180 M200 L200 L225 M

AAAAAAA

80808080808080

65656565656565

100100100100100100100

550550550550550550750

320320320320320320550

400400400400400400590

470470470470470470470

310310310310310310365

250250250250250250250

130130130130130130130

1150115011501400140014001550

940940940119011901190940

1000100010001250125012501400

1400140014001570157015701550

119011901190136013601360940

1250125012501420142014201400

140140140140140140140

65-315 ------

5.57.511.0

132 S132 M160 M

AAA

808080

656565

125125125

550550550

320320320

400400400

470470470

335335335

280280280

130130130

115011501400

9409401190

100010001250

140014001570

119011901360

125012501420

140140140

80-160 ------

15.018.522.030.0

1.52.23.0--------

90 L100 L100 L160 M160 L180 M200 L

AAAAAAA

100100100100100100100

80808080808080

125125125125125125125

500500500500500550550

280280280280280320320

350350350350350400400

360360360360360360360

280280280280280290310

225225225225225225225

112112112112112112112

1050105010501270127014001400

840840840

1060106011901190

9009009001120112012501250

1050115011501400140014001400

8409409401190119011901190

900100010001250125012501250

140140140140140140140

80-200 --------

18.522.030.037.045.0

2.23.04.05.5----------

100 L100 L112 M132 S160 L180 M200 L200 L225 M

AAAAAAAAB

100100100100100100100100100

808080808080808080

125125125125125125125125125

500500500500550550550550750

280280280280320320320320550

350350350350400400400400590

470470470470470470470470470

280280280280290290310310365

250250250250250250250250250

112112112112112112112112112

115011501150115014001400140014001550

9409409409401190119011901190940

100010001000100012501250125012501400

127012701270127015701570157015701550

10601060106010601360136013601360940

112011201120112014201420142014201400

140140140140140140140140140

80-250 --------

30.037.045.055.075.0

4.05.57.511.0

--------

112 M132 S132 M160 M200 L200 L225 M250 M280 S

AAAAAABBB

100100100100100100100100100

808080808080808080

125125125125125125125125125

550550550550550550750810880

320320320320320320550600670

400400400400400400590650720

470470470470470470470470470

310310310310310310365390420

280280280280280280280280280

130130130130130130130130130

115011501150140014001400155017501750

940940940119011901190940

10601060

100010001000125012501250140016001600

140014001400157015701570155017501750

119011901190136013601360940

10601060

125012501250142014201420140016001600

140140140140140140140140140

80-315 --------

7.511.015.018.5

132 M160 M160 L180 M

AAAA

100100100100

80808080

125125125125

550550550550

320320320320

400400400400

470470470470

360360360360

315315315315

130130130130

1150140014001400

940119011901190

1000125012501250

1400157015701570

1190136013601360

1250142014201420

140140140140

DN = EN 1092-2/DN.../PN 16/21/JS1025/B

Page 9: Etanorm SYA - DigitalOcean

Fig. A

Fig. B

M

Etanorm SYA

9

Etanorm SYA 100-160 -- 125-250

Tolerances of connecting dimensions as per EN 735

mmEtanorm IP 55 Fig.Etanorm

SYA 2900 1450

1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x

100-160 ----

22.030.037.0

3.04.0------

100 L112 M180 M200 L200 L

AAAAA

125125125125125

100100100100100

125125125125125

550550550550550

320320320320320

400400400400400

470470470470470

310310310310310

280280280280280

130130130130130

11501150140014001400

940940119011901190

10001000125012501250

14001400157015701570

11901190136013601360

12501250142014201420

140140140140140

100-200 ------

30.037.045.055.075.0

4.05.57.5----------

112 M132 S132 M200 L200 L225 M250 M280 S

AAAAABBB

125125125125125125125125

100100100100100100100100

125125125125125125125125

550550550550550750810880

320320320320320550600670

400400400400400590650720

470470470470470470470470

310310310310310365390420

280280280280280280280280

130130130130130130130130

11501150115014001400155017501750

9409409401190119094010601060

10001000100012501250140016001600

14001400140015701570155017501750

1190119011901360136094010601060

12501250125014201420140016001600

140140140140140140140140

100-250 ------

55.075.090.0

7.511.015.0

------

132 M160 M160 L250 M280 S280 M

AAABBB

125125125125125125

100100100100100100

140140140140140140

550550550810880880

320320320600670670

400400400650720720

470470470470470470

335335335390420420

280280280280280280

130130130130130130

115014001400175017501750

94011901190106010601060

100012501250160016001600

140015701570175017501750

119013601360106010601060

125014201420160016001600

140140140140140140

100-315 --------

15.018.522.030.0

160 L180 M180 L200 L

AAAB

125125125125

100100100100

140140140140

550550550750

320320320550

400400400590

470470470470

360360360390

315315315315

130130130130

1400140014001550

119011901190940

1250125012501400

1570157015701550

136013601360940

1420142014201400

140140140140

125-200 ------

55.075.090.0110.0

7.511.015.0

--------

132 M160 M160 L250 M280 S280 M315 S

AAABBBB

150150150150150150150

125125125125125125125

140140140140140140140

550550550810880880940

320320320600670670730

400400400650720720780

470470470470470470470

360360360390420420455

315315315315315315315

130130130130130130130

1150140014001750175017501800

940119011901060106010601100

1000125012501600160016001650

1400157015701750175017501800

1190136013601060106010601100

1250142014201600160016001650

140140140140140140140

125-250 ------

11.015.018.5

160 M160 L180 M

AAA

150150150

125125125

140140140

550550550

320320320

400400400

470470470

360360360

355355355

130130130

140014001400

119011901190

125012501250

157015701570

136013601360

142014201420

140140140

DN = EN 1092-2/DN.../PN 16/21/JS1025/B

Page 10: Etanorm SYA - DigitalOcean

M

Etanorm SYA

10

Etanorm SYA 125-315 -- 150-400.1

Tolerances of connecting dimensions as per EN 735

mmEtanorm

SYAIP 55ta o

SYA 2900 1450

1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x

125-315 --------

18.522.030.037.0

180 M180 L200 L225 S

150150150150

125125125125

140140140140

810810810810

600600600600

650650650650

530530530530

420420420420

355355355355

112112112112

1750175017501750

1060106010601060

1600160016001600

1750175017501750

1060106010601060

1600160016001600

140140140140

125-400 ----------

30.037.045.055.075.0

200 L225 S225 M250 M280 S

150150150150150

125125125125125

140140140140140

810810810810880

600600600600670

650650650650720

530530530530530

455455455455455

400400400400400

112112112112112

17501750175017501750

10601060106010601060

16001600160016001600

17501750175017501750

10601060106010601060

16001600160016001600

140140140140140

150-315 --------

22.030.037.045.0

180 L200 L225 S225 M

200200200200

150150150150

160160160160

880880880880

670670670670

720720720720

530530530530

420420420420

400400400400

112112112112

1750175017501750

1060106010601060

1600160016001600

1750175017501750

1060106010601060

1600160016001600

140140140140

150-400.1 ----------

37.045.055.075.090.0

225 S225 M250 M280 S280 M

200200200200200

150150150150150

160160160160160

880880880880880

670670670670670

720720720720720

530530530530530

455455455455455

450450450450450

112112112112112

17501750175017501750

10601060106010601060

16001600160016001600

17501750175017501750

10601060106010601060

16001600160016001600

140140140140140

DN = EN 1092-2/DN.../PN 16/21/JS1025/B

Page 11: Etanorm SYA - DigitalOcean

Etanorm SYA

11

Etanorm SYA

1 M Druckmeßgerät-Anschluß / Pressure gauge connection / Indicateur de pression /Manomètre / Manometro / Manometer

6 B Förderflüssigkeit-Entleerung / Casing drain / Vidange du liquide pompé /Scarico del liquido convogliato / Vloeistof- aftap

6 D Förderflüssigkeit-Auffüllen und Entlüften / Filling and venting of medium handled /Remplissage et purge d’air du liquide pompé / Riempimento del liquido convog-liato spurgo dell’aria / Vloeistof vullen en ontluchten

8 B Leckflüssigkeit-Ablaß / Leakage drain / Vidange liquide de fuite /Uscita del liquido di fuga / Salida del líquido de fugas / lekvloeistof afvoer

Tolerances of connecting dimensions as per EN 735

mmEtanorm

SYA DN1 DN2 a b1 b2 b3 c d1k6 d2 f h1 h2 i l m1 m2 n1 n2 s1 s2 t u w1 M6 B

6 D8 B

32-125.132-160.132-200.1

505050

323232

808080

505050

113116128

113125137

100100100

242424

141414

360360360

112132160

140160180

232325

505050

100100100

707070

190240240

140190190

446

151518

272727

888

260260260

G 3/8G 3/8G 3/8

G 1/4G 1/4G 1/4

32-16032-20032-250

505050

323232

8080

100

505065

113132170

125141176

100100100

242424

141414

360360360

132160180

160180225

232525

505050

100100125

707095

240240320

190190250

466

151818

272727

888

260260260

G 3/8G 3/8G 3/8

G 1/4G 1/4G 1/4

40-16040-20040-25040-315

65656565

40404040

80100100125

50506565

115115165194

131131178283

100100100130

24242432

14141414

360360360470

132160180225

160180225250

23252524

50505080

100100125125

70709595

240265320345

190212250280

4666

15181818

27272735

888

10

260260260340

G 3/8G 3/8G 3/8G 3/8

G 1/4G 1/4G 1/4G 1/4

50-16050-20050-25050-315

65656565

50505050

100100100125

50506565

126145168200

147165184216

100100100130

24242432

14141414

360360360470

160160180225

180200225280

25252524

50505080

100100125125

70709595

265265320345

212212250280

6666

18181818

27272735

888

10

260260260340

G 3/8G 3/8G 3/8G 3/8

G 1/4G 1/4G 1/4G 1/4

65-16065-20065-25065-315

80808080

65656565

100100100125

65658080

130154180208

158177200229

100100130130

24243232

14141919

360360470470

160180200225

200225250280

25252424

50508080

125125160160

9595

120120

280320360400

212250280315

6666

18182020

27273535

88

1010

260260340340

G 3/8G 3/8G 3/8G 3/8

G 1/4G 1/4G 1/4G 1/4

80-16080-20080-25080-315

100100100100

80808080

125125125125

65658080

153161184220

192189210244

100130130130

24323232

14141919

360470470470

180180200250

225250280315

25242424

50808080

125125160160

9595

120120

320345400400

250280315315

6666

18181820

27353535

8101010

260340340340

G 3/8G 3/8G 3/8G 3/8

G 1/4G 1/4G 1/4G 1/4

100-160100-200100-250100-315

125125125125

100100100100

125125140140

80808080

178173190225

225213220255

130130130130

32323232

19191919

470470470470

200200225250

280280280315

24242424

80808080

160160160160

120120120120

360360400400

280280315315

6666

18181818

35353535

10101010

340340340340

G 1/2G 1/2G 1/2G 1/2

G 1/4G 1/4G 1/4G 1/4

125-200125-250125-315125-400

150150150150

125125125125

140140140140

8080

100100

195226238275

244275278306

130130160160

32324242

19192424

470470530530

250250280315

315355355400

24242525

8080110110

160160200200

120120150150

400400500500

315315400400

6666

20202020

35354545

10101212

340340370370

G 1/2G 1/2G 1/2G 1/2

G 1/4G 1/4G 1/4G 1/4

150-315150-400.1

200200

150150

160160

100100

255285

303325

160160

4242

2424

530530

280315

400450

2525

110110

200200

150150

550550

450450

66

2020

4545

1212

370370

G 1/2G 1/2

G 1/4G 1/4

DN = EN 1092-2/DN.../PN 16/21/JS1025/B ”G” = ISO 228/1

Page 12: Etanorm SYA - DigitalOcean

Sub

ject

tote

chni

calm

odifi

catio

ns1.

6.20

01X

BS

d/1

Sha

ftun

it

Eta

no

rmS

YA

Eta

blo

cS

Y

Eta

line

SY S

haft

1)

Impe

ller

Sup

port

foot

1)

Dee

p-gr

oove

Dis

char

geco

ver

Pla

inbe

arin

g

Bea

ring

brac

ket1

)

Bea

ring

hous

ing

2)

Bea

ring

cove

r1)

Volu

teca

sing

Mec

hani

cals

eal

Sea

lcov

er2)

Sea

lrin

gho

lder

1)

Cas

ing

wea

rrin

gsu

ctio

nsi

de

102

183

163

210

230

476

502.

2

321

330

433

310

360

502.

1

471

350

ball

bear

ing

1)

Cas

ing

wea

rrin

gdi

scha

rge

side

1

1

XSame number means same component Components differ Component not fittedO

Etanorm SYA

KSB Aktiengesellschaft67225 Frankenthal, Johann-Klein-Str. 9, 67227 Frankenthal (Germany)Tel.: (+49) 62 33/86-0 . Fax: (+49) 62 33/86-34 01 . www.ksb-industry.com

Recommended Spare Parts Stock for 2 Years’ Continuous OperationPart No. Description Number of pumps (including stand-by pumps)

2 3 4 5 6 and 7 8 and 9 10 and moreQuantity of spare parts

210230321330433502.1--

ShaftImpeller (incl. casing wear ring 502.2)Deep-groove ball bearingBearing bracket 1)

Mechanical sealCasing wear ringGasket / Joint ring (set) 2)

111--114

111--116

112--218

222--228

223--329

22413212

20 %20 %100 %2 off25 %20 %150 %

1) Bearing bracket 330, cpl., consisting of: shaft 210, plain bearing 310, deep-groove ball bearing 321, bearing bracket 330, bearing cover 360, joint ring 411.1, O-ring 412.1/.2, mechanicalseal 433, seat ring holder 476, disc 550.1/.2/.3, hex. head bolt 901.1, screwed plug 903, plug 916, hex. nut 920.3, spring washer 930, circlip 932.1/.2

2) Gasket / Joint ring (set), consisting of: gasket 400, joint ring 411.1/.3/.4

Interchangeability of Etanorm SYA, Etabloc SY, Etaline SY Components and Interchangeability of Component PartsDescription

Part No.

32-125.1 25 32-125.1/. O 1 1 1 O O 1 1 1 1 1 1 1 1 X

32-160.1 25 32-160.1/. 40-160/.. O 1 2 1 1 O 1 1 1 1 1 1 1 1 3

32-200.1 25 32-200.1/. 40-200/.. O 2 3 1 2 O 1 1 1 1 1 1 1 1 3

32-160 25 32-160/.. 50-160/.. O 1 2 1 1 O 1 1 1 1 1 1 1 1 3

32-200 25 32-200/.. 50-200/.. O 2 3 1 2 O 1 1 1 1 1 1 1 1 3

32-250 25 O 3 4 1 O 2 1 1 1 1 1 1 10

40-160 25 40-160/.. 65-160/.. O 1 2 1 O O 1 1 1 1 1 1 1 2 3

40-200 25 40-200/.. 65-200/.. O 2 3 1 O O 1 1 1 1 1 1 1 O 3

40-250 25 O 3 4 1 O 2 1 1 1 1 1 2 10

40-315 35 O O 7 2 O 3 2 2 2 2 2 2 13

50-160 25 50-160/.. 80-160/.. O 1 3 1 O O 1 1 1 1 1 1 1 3 3

50-200 25 50-200/.. 80-200/.. O 2 3 1 O O 1 1 1 1 1 1 1 3 3

50-250 25 O 3 4 1 O 2 1 1 1 1 1 3 10

50-315 35 O 7 7 2 O 3 2 2 2 2 2 4 11

65-160 25 65-160/.. 100-160/.. O 4 3 1 O O 1 1 1 1 1 1 1 4 5

65-200 25 65-200/.. O O 4 1 O O 1 1 1 1 1 1 1 4 5

65-250 35 O O 5 2 O 3 2 2 2 2 2 5 13

65-315 35 O 7 7 2 O 3 2 2 2 2 2 5 11

80-160 25 80-160/.. 100-170/.. O 4 4 1 O O 1 1 1 1 1 1 1 6 5

80-200 35 O 5 O 2 O 3 2 2 2 2 2 6 11

80-250 35 O 6 5 2 O 3 2 2 2 2 2 6 11

80-315 35 O 7 6 2 O 3 2 2 2 2 2 6 11

100-160 35 O 5 5 2 O 3 2 2 2 2 2 7 11

100-200 35 O 5 5 2 O 3 2 2 2 2 2 7 11

100-250 35 O 6 7 2 O 3 2 2 2 2 2 7 11

100-315 35 O 7 6 2 O 3 2 2 2 2 2 7 11

125-200 35 O O 6 2 O 3 2 2 2 2 2 8 O

125-250 35 O O 6 2 O 3 2 2 2 2 2 8 O

125-315 55 O 8 9 3 O 3 3 3 3 3 3 8 12

125-400 55 O 9 8 3 O 3 3 3 3 3 3 8 12

150-315 55 O 8 9 3 O 3 3 3 3 3 3 9 12

150-400.1 55 O 10 8 3 O 3 3 3 3 3 3 9 X

1) Etanorm SYA only2) Etabloc SY/Etaline SY only