4
Extron SM 26 and SM 26T SpeedMount ® Surface Mount Speakers • Specifications 1 Specifications SM 26, SM 26T Audio/acoustic and electrical Speaker type ���������������������������������� 2-way, full range, indoor surface mount speaker Frequency range����������������������������� 70 Hz to 18 kHz, -10 dB, full space Power capacity ������������������������������� 60 W (rms) continuous pink noise (per IEC 60268-5) 120 W (rms) continuous program Nominal sensitivity�������������������������� 90 dB SPL, 1 W, 1 m, full space Nominal impedance ����������������������� 8 ohms Crossover frequency ����������������������� 2�5 kHz Rotary switch taps (SM 26T only) ���� 70 V: 32 W, 16 W, 8 W, 4 W, 2 W, 8 ohms direct 100 V: null, 32 W, 16 W, 8 W, 4 W, 8 ohms direct Woofer ������������������������������������������ (1) 6�5" (165 mm) polypropylene cone Tweeter ������������������������������������������ (1) 1�0" (25 mm) silk dome Overload protection ����������������������� Full range power limiter protecting the tweeter, woofer, and crossover Input connectors Speaker ����������������������������������� 2 recessed pins Mounting plate������������������������ (1) 10 mm Euro-style captive screw terminal block, 4 pole General Package ����������������������������������������� 2 speakers (1 pair) with mounting kit Temperature/humidity �������������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing Mounting ��������������������������������������� Wall mountable with included mounting hardware or optional yoke mount 0° mounting plate ������������������� Fixed 0° 10° mounting adapter ������������ Fixed 10° up, down, left, or right, based on adapter orientation Yoke mount (optional) ������������� Up to 90° upward/downward or left/right in 10° steps based on orientation of yoke Enclosure type �������������������������������� Plastic, trapezoidal, with molded grille and bass reflex ports Enclosure outer dimensions Speaker only ���������������������������� 12�98" H x 8�45" W x 5�45" D (32�97 cm H x 21�46 cm W x 16�38 cm D) With 0° mounting plate ����������� 12�98" H x 8�45" W x 6�96" D (32�97 cm H x 21�46 cm W x 17�68 cm D) Product weight SM 26 Speaker only ���������������������� 7�5 lbs (3�40 kg) each With 0° mounting plate ����� 8�4 lbs (3�81 kg) each SM 26T Speaker only ���������������������� 8�8 lbs (4�00 kg) each With 0° mounting plate ����� 9�7 lbs (4�40 kg) each Shipping weight ����������������������������� SM 26 ������������������������������������� Pair: 20 lbs (9�1 kg) with mounting kit package SM 26T������������������������������������ Pair: 22�6 lbs (10�3 kg) with mounting kit package

Extron SM 26 and SM 26T SpeedMount Surface Mount …media.extron.com/.../SM_26_and_SM_26_T_D2_081413.pdf · Extron SM 26 and SM 26T SpeedMount ® Surface Mount Speakers • Specifications

Embed Size (px)

Citation preview

Page 1: Extron SM 26 and SM 26T SpeedMount Surface Mount …media.extron.com/.../SM_26_and_SM_26_T_D2_081413.pdf · Extron SM 26 and SM 26T SpeedMount ® Surface Mount Speakers • Specifications

Extron SM 26 and SM 26T SpeedMount® Surface Mount Speakers • Specifications 1

SpecificationsSM 26, SM 26T

Audio/acoustic and electricalSpeaker type ���������������������������������� 2-way, full range, indoor surface mount speakerFrequency range ����������������������������� 70 Hz to 18 kHz, -10 dB, full spacePower capacity ������������������������������� 60 W (rms) continuous pink noise (per IEC 60268-5)

120 W (rms) continuous programNominal sensitivity �������������������������� 90 dB SPL, 1 W, 1 m, full spaceNominal impedance ����������������������� 8 ohmsCrossover frequency ����������������������� 2�5 kHzRotary switch taps (SM 26T only) ���� 70 V: 32 W, 16 W, 8 W, 4 W, 2 W, 8 ohms direct

100 V: null, 32 W, 16 W, 8 W, 4 W, 8 ohms direct Woofer ������������������������������������������ (1) 6�5" (165 mm) polypropylene coneTweeter ������������������������������������������ (1) 1�0" (25 mm) silk domeOverload protection ����������������������� Full range power limiter protecting the tweeter, woofer, and crossoverInput connectors

Speaker ����������������������������������� 2 recessed pinsMounting plate ������������������������ (1) 10 mm Euro-style captive screw terminal block, 4 pole

GeneralPackage ����������������������������������������� 2 speakers (1 pair) with mounting kitTemperature/humidity �������������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingMounting ��������������������������������������� Wall mountable with included mounting hardware or optional yoke mount

0° mounting plate ������������������� Fixed 0°10° mounting adapter ������������ Fixed 10° up, down, left, or right, based on adapter orientationYoke mount (optional) ������������� Up to 90° upward/downward or left/right in 10° steps based on orientation of

yokeEnclosure type �������������������������������� Plastic, trapezoidal, with molded grille and bass reflex portsEnclosure outer dimensions

Speaker only ���������������������������� 12�98" H x 8�45" W x 5�45" D (32�97 cm H x 21�46 cm W x 16�38 cm D)

With 0° mounting plate ����������� 12�98" H x 8�45" W x 6�96" D (32�97 cm H x 21�46 cm W x 17�68 cm D)

Product weightSM 26

Speaker only ���������������������� 7�5 lbs (3�40 kg) eachWith 0° mounting plate ����� 8�4 lbs (3�81 kg) each

SM 26TSpeaker only ���������������������� 8�8 lbs (4�00 kg) eachWith 0° mounting plate ����� 9�7 lbs (4�40 kg) each

Shipping weight �����������������������������

SM 26 ������������������������������������� Pair: 20 lbs (9�1 kg) with mounting kit packageSM 26T ������������������������������������ Pair: 22�6 lbs (10�3 kg) with mounting kit package

zz For manuals, use the standard Section style instead of Chapter title, specs sheet or Heading 1, specs stand-alone; and use Heading 1 as usual for “Specifications” if the specs are part of a multitopic chapter�

zz Click the text tool where you want to insert the specs table, select the specs table container paragraph style, then paste in the specs table from the stand-alone master specs sheet�

zz For specifications from template v7�6 or earlier, use this guide to which new paragraph style replaces which old style:

zz Specs8_Heading 2 replaces SpecsSubHdr

zz Specs8_L1 “ Specs7

zz Specs8_L1 cont’d “ Specs7A

zz Specs8_L2 “ Specs7 subcategory

zz Specs8_L3 “ Specs7 sub-subcategory

zz Specs8_Note “ SpecsNote7

zz Specs8_Warning/Caution “ Specs7Warning/caution

zz Specs8_ Revision code “ Revision code

zz The other new styles are required for proper table placement/formatting (one for the entire specs table as placed within a manual section [specs table conteiner], two others [Specs8_Note L1 table and Specs8_Note L2 table] for the note/caution cells within the specs table)�

zz At this time, the notes, cautions, and warnings boxes/tables within specs have to be hand inserted and merged and formatted� Use the existing table styles (NOTE, Caution, and Warning1) for the table boxes�

zz Apply Specs8_Note L1 table or Specs8_Note L2 table (depending on the content to which the note, caution, or warning applies) to the nested note, caution, or warning table� Also apply the cell style Specs8_Note cell insets to the cell containing the note, caution, or warning nested table�

zz Apply Specs8_Note or Specs8_Warning/Caution to the text within the nested note, caution, or warning table�

zz Apply the Specs8_note cell inset cell style to the specs table cell containing the nested table�

NOTES:• Allnominallevelsareat±10%.ULratedforuseinplenumairspaces:meetsUL2043forheatandsmokerelease, excluding the power supply; meets UL 60950 for safety� UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety�

• Specifications are subject to change without notice� UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety�

• The 5-pole port supports both hardware and software flow control� The 3-pole ports support software flow control�

Page 2: Extron SM 26 and SM 26T SpeedMount Surface Mount …media.extron.com/.../SM_26_and_SM_26_T_D2_081413.pdf · Extron SM 26 and SM 26T SpeedMount ® Surface Mount Speakers • Specifications

Extron SM 26 and SM 26T SpeedMount® Surface Mount Speakers • Specifications 2

Regulatory complianceSafety �������������������������������������� CEEnvironmental �������������������������� Complies with the appropriate requirements of RoHS and WEEE�

Warranty ���������������������������������������� 5 years parts and labor

NOTE: Allnominallevelsareat±10%.

NOTE: Specifications are subject to change without notice�

Page 3: Extron SM 26 and SM 26T SpeedMount Surface Mount …media.extron.com/.../SM_26_and_SM_26_T_D2_081413.pdf · Extron SM 26 and SM 26T SpeedMount ® Surface Mount Speakers • Specifications

Extron SM 26 and SM 26T SpeedMount® Surface Mount Speakers • Specifications 3

100.00 Hz125.00 Hz

160.00 Hz200.00 Hz

250.00 Hz315.00 Hz

400.00 Hz500.00 Hz

630.00 Hz800.00 Hz

1.00 kHz1.25 kHz

1.60 kHz2.00 kHz

2.50 kHz3.15 kHz

4.00 kHz5.00 kHz

6.30 kHz8.00 kHz

10.00 kHz12.50 kHz

16.00 kHz20.00 kHz

100 Hz - 200 Hz 250 Hz - 500 Hz

630 Hz - 1.25 kHz

4 kHz - 8 kHz

1.6 kHz - 3.15 kHz

10 kHz - 20 kHz

-150

-120

-90

-60

-300 Deg

30

60

90

120

150

180

-150

-120

-90

-60

-300 Deg

30

60

90

120

150

180

-10

-20

-30

-150

-120

-90

-60

-300 Deg

30

60

90

120

150

180

-10

-20

-30

-150

-120

-90

-60

-300 Deg

30

60

90

120

150

180

-10

-20

-30

-150

-120

-90

-60

-300 Deg

30

60

90

120

150

180

-10

-20

-30

-150

-120

-90

-60

-300 Deg

30

60

90

120

150

180

-10

-20

-30

00

0 0

00

-10

-20

-30

SM 26 and SM 26T POLAR GRAPHS – 1/3 OCTAVE, HORIZONTAL

Page 4: Extron SM 26 and SM 26T SpeedMount Surface Mount …media.extron.com/.../SM_26_and_SM_26_T_D2_081413.pdf · Extron SM 26 and SM 26T SpeedMount ® Surface Mount Speakers • Specifications

Extron SM 26 and SM 26T SpeedMount® Surface Mount Speakers • Specifications 4

8�0-081413-D2

SM 26 and SM 26T RESPONSE GRAPHS – FREQUENCY AND IMPEDANCESPL vs. FREQUENCY

SPL vs. FREQUENCY – HORIZONTAL OFF-AXIS RESPONSE

IMPEDANCE vs. FREQUENCY

dBSPL

20 Hz 50 100 200 500 1K 2K 5K 10K 20K10

20

30

40

50

60

70

80

90

100

dBSPL

20 Hz 50 100 200 500 1K 2K 5K 10K 20K10

20

30

40

50

60

70

80

90

100

20 Hz 50 100 200 500 1K 2K 5K 10K 20K

Ohm

5

6

7

8

910

20

30

40

0 Degrees10 Degrees20 Degrees30 Degrees40 Degrees