12
Fausto & CCCam Client STEP 1-Client CCcam definition CCCam Client syntax can be found on file: \Fausto\Fausto\EMU\FaustoClients Example.Cfg # syntax for CCcam Client connection # F: IP PORT WANTEMU USERNAME PASSWORD {CAID-4 byte len/PROVIDS-6 bytes len} # WANTEMU=0 Disable CCCam Emu on sharing # WANTEMU=1 Enable CCCam Emu on sharing # example: # F: 127.0.0.1 9000 1 dummy dummy # or # filtered on Caid/provids # F: 127.0.0.1 9000 0 dummy dummy {0100/003315 003317} Be sure File FaustoClients.Cfg exist under folder \Fausto\Fausto\EMU\, If not exist rename FaustoClients Example.Cfg to FaustoClients.Cfg CCCam client must be defined on file named \Fausto\Fausto\EMU\FaustoClients.Cfg Run Fausto Open Emulator Window Clic on Client Clic on Configuration Clic on Open FaustoClients.Cfg will be loaded

Fausto Configuração

  • Upload
    timigo

  • View
    395

  • Download
    16

Embed Size (px)

DESCRIPTION

Tutorial para configurar o programa fausto como cliente cccam.

Citation preview

Page 1: Fausto Configuração

Fausto & CCCam Client STEP 1-Client CCcam definition CCCam Client syntax can be found on file: \Fausto\Fausto\EMU\FaustoClients Example.Cfg # syntax for CCcam Client connection # F: IP PORT WANTEMU USERNAME PASSWORD {CAID-4 byte len/PROVIDS-6 bytes len} # WANTEMU=0 Disable CCCam Emu on sharing # WANTEMU=1 Enable CCCam Emu on sharing # example: # F: 127.0.0.1 9000 1 dummy dummy # or # filtered on Caid/provids # F: 127.0.0.1 9000 0 dummy dummy {0100/003315 003317} Be sure File FaustoClients.Cfg exist under folder \Fausto\Fausto\EMU\, If not exist rename FaustoClients Example.Cfg to FaustoClients.Cfg CCCam client must be defined on file named \Fausto\Fausto\EMU\FaustoClients.Cfg Run Fausto Open Emulator Window Clic on Client Clic on Configuration Clic on Open FaustoClients.Cfg will be loaded

Page 2: Fausto Configuração

Enter your CCCam F line Clic on Save To check line syntax clic on Verify, all errors on line defined will be showed

Page 3: Fausto Configuração

STEP 2-Start CCCam client Clic on Manager Before Client Manager start you must load Client datas defined on file FaustoClients.Cfg Clic on Load

Page 4: Fausto Configuração

Now Manager ready to connect to server There is 2 possibilities: 1.Run only wanted client (press mouse right clic for local popup menu)

2.Run All Client (clic on Start button)

Page 5: Fausto Configuração

On tab manager grid if connection success you’ll see status “Running” More infos about client connection can be found under tab Processes

To know providers shared by CCCam server On tab Manager, double clic on Client CCCam line

Page 6: Fausto Configuração

STEP 3-Start Fausto Emulator At this step Client defined & CCCam client running, now we need incoming ecm to send to server To do that will use Diablo Wireless, Season Interface, SSSP or HSIC connection Season Interface

Serial: SSSP/HSIC

Page 7: Fausto Configuração

Diablo Wireless

After hardware connected Ecms will comes under tab MONITOR and will be send to client

Page 8: Fausto Configuração

If under tab Client Manager case ECM debug ticked, ecms sent by client to server can be logged Go under tab Client Be sure on Manager ECM log Ticked Clic on LOGS

Page 9: Fausto Configuração

System tested with Fausto CCCam Client (over the net) Betacrypt

Conax

Page 10: Fausto Configuração

Cryptoworks

Irdeto

Page 11: Fausto Configuração

Nagra3

NDS-Videoguard

Page 12: Fausto Configuração

Seca

Viaccess

©MASARE TEAM