For more information, visit commscope.com

Fiber Drop Splice Closure

1

• In-line closure

• Single cable drop repair

• Small size

• Heat-shrink or Gel cable sealing technologies

• For up to 2 fibers (single splicing)

• From 3 - 12 fibers (ribbonized splicing)

The Fiber Drop Repair Splice Closure is a taut sheath style fiber closure for use in repairing a single typical “drop” cable of 1 to 12 fibers in above ground, below grade, and direct buried applications. Fiber Drop Splice Closures are available in either heat-shrink or wrap-around gel sleeve cable sealing technologies.

Designed for use with either toneable or nontoneable flat or round drop cables, this closure incorporates sliding collars onto a metal backbone to facilitate ease of splicing, whether fusion or mechanical. Recommended use of our adjustable splice work stand will reduce set-up and splicing times (For ordering use description: FDSC-ACC-SPLITER-FIXTR-A).

The heat-shrink version utilizes heat-shrinkable tubing to seal the cables. The gel sealing version incorporates CommScope’s gel sealing technology into a wrap-around sleeve that is re-enterable.

Features and Benefits• Compatibility with most drop cable types

• Handles 1 to 12 fibers

• Heat-shrink or gel cable sealing

• Closure diameters: 24 inches long,

- Heat-Shrink version - 1.25 inches diameter

- Gel-Seal version - 2 inches diameter

• In-line closure• Single cable drop repair• Small size• Heat-shrink or Gel cable sealing technologies• For up to 2 fibers (single splicing)• From 3 - 12 fibers (ribbonized splicing)

The Fiber Drop Repair Splice Closure is a taut sheath style fiber closure for use in repairing a single typical “drop” cable of 1 to 12 fibers in above ground, below grade, and direct buried applications. Fiber Drop Splice Closures are available in either heat-shrink or wrap-around gel sleeve cable sealing technologies.

Designed for use with either toneable or non-toneable flat or round drop cables, this closure incorporates sliding collars onto a metal backbone to facilitate ease of splicing, whether

fusion or mechanical. Recommended use of our adjustable splice work stand will reduce set-up and splicing times (For ordering use description: FDSC-ACC-SPLITER-FIXTR-A).

The heat-shrink version utilizes heat-shrinkable tubing to seal the cables. The gel sealing version incorporates Tyco Electronics’ gel sealing technology into a wrap-around sleeve that is re-enterable.

Features and Benefits:- Compatibility with most drop cable types- Handles 1 to 12 fibers- Heat-shrink or gel cable sealing- Closure diameters: 24 inches long,

Heat-Shrink version - 1.25 inches diameterGel-Seal version - 2 inches diameter

Fiber Drop Splice Closure

Fiber Drop Splice Closure

Ordering Information

FDSC - DRP - REP - TS - XX

Fiber Drop Splice Closure, Drop Repair

TS Taut Sheath

HS Heat-shrink

GL Gel

Cable SealingName

Style

AccessoriesSplicing Fixture:

FDSC-ACC-SPLITER-FIXTR-A — Fixture for holding closure splice rail during splicing.

Splice Sleeve Sizes and Specifications (dimensions shown in milimeters)

Product Description Fiber Typer Unit of Measure Quantity per Pack

Lengths

Tubing Adhesive Rod

A B C

SMOUV 1120-01-US Single pack 100 62 59 56

SMOUV 1120-02-US Single pack 100 45 42 40

SMOUV 1120-03-US Single pack 100 23 21 18

SMOUV 1120-R2/12-02-US Ribbon pack 50 42 42 40*

* Ceramic rod

© 2006-2009 Tyco Electronics Corporation. All rights reserved.F542.09/09

Tyco Electronics Corporation8000 Purfoy RoadFuquay Varina, NC 27526-9349Tel 919-557 8900Fax 919-557 8498www.tycoelectronics.comwww.us.telecomosp.com

SMOUV, TE (logo), and Tyco Electronics are trademarks of the Tyco Electronics group of companies and its licensors.

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, Tyco Electronics Corporation makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. Tyco Electronics’ obligations shall only be as set forth in Tyco Electronics’ Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of Tyco Electronics products should make their own evaluation to determine the suitability of each such product for the specific application.

FDSC-DRP-REP - TS - XX

NameFiber Drop Splice Closure, Drop Repair

StyleTS – Taut Sheath

Cable SealingHS - Heat-shrinkGL - Gel

AccessoriesSplicing Fixture:

FDSC-ACC-SPLITER-FIXTR-A - Fixture for holding closure splice rail during splicing.

Splice Sleeve Sizes and Specifications (dimensions shown in millimeters)

LengthsFiber Unit of Quantity Tubing Adhesive Rod

Product Description Type Measure per Pack A B CSMOUV 1120-01-US Single pack 100 62 59 56SMOUV 1120-02-US Single pack 100 45 42 40SMOUV 1120-03-US Single pack 100 23 21 18SMOUV 1120-R2/12-02-US Ribbon pack 50 42 42 40*

*Ceramic rod

Heat-shrinkable tubing Stainless steel rod (ceramic rod for ribbon version)

Hot-melt adhesive

CBA

Contact us

Tyco Electronics Corporation

8000 Purfoy Road

Fuquay Varina, NC 27526-9349

Tel: 919-557-8900

Fax: 919-557-8498

www.te.com/bns

PRODUCT SHEET

BROADBAND NETWORK SOLUTIONS /// FIBER DROP SPLICE CLOSURE

te.comSMOUV,, TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners.

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.

© 2014 TE Connectivity Ltd. family of companies All Rights Reserved.

F542.09/09 Revision © 2006-2009

Heat-shrinkable tubing

Stainless steel rod (ceramic rod for ribbon verision)

Hot-melt adhesive

CBA

www.commscope.comVisit our website or contact your local CommScope representative for more information.

© 2016 CommScope, Inc. All rights reserved.

SMOUV and all trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services.

PS-322590-AE (01/16)