This tool is a quick and easy way to assemble all the components of your FiberBench System. Use the various components in the following slides to lay out your design and to help you choose the correct components. See the last slide for inspiration.

How to Use:How to Use: Step 1: Select your FiberBench

Depending on your application, select a single-axis or multi-axis FiberBench (Slide 3) Basic part numbers are included All possible beam paths are drawn in red,

Delete or modify the length/direction of any beam paths by simply clicking on them Input/output FiberPorts are located where the beam exits the FiberBench (not all ports need to be

used) Once you have determined the bench(es) suitable for your application, copy and paste

the bench(es) in the 5th slide, which acts as your work area. Step 2: Choose your Components

The components are broken up into categories for easier selection (Slide 4) A transparent replica is next to most components for easier alignment on the FiberBench. Beam diagrams are included where necessary for better understanding of function of

part. Basic part numbers are included. A vertical and horizontal part is included for some where applicable, however

components can be rotated also in order to have the proper alignment. Once you have chosen the components of your choice, copy and paste them into the 4th

blank slide, which acts as your work area. Step 3: Build your system

The 4th slide contains some example systems for your reference. These can be easily deleted or re-configured based on your needs.

NOTE: This tool is meant only for approximation of alignment, and to aid in choosing proper parts for your system. A different program such as SolidWorks should be used to provide more precise dimensioning and alignment of parts.

It is easier to create beam paths without components, therefore leave all beam paths on the bench and delete the paths not needed.

All components are grouped, be sure to click on the outermost corner of the part to ensure you select the entire group of parts.

You can move parts in small increments by pressing down on the Ctrl button on your keyboard and using the arrow keys at the same time. This helps in precise alignments.

Zooming In: Click on the part you wish to zoom in on, THEN zoom in. This keeps the chosen part centered on your screen.

If you cannot see components, the order will have to be changed, click on the component and choose Bring to Front, Bring Forward, Send to Back, etc.

Single Axis

Multiple Axes

Step 1:Choose your Bench

Offset Mirror Modules

Step 2: Choose your components

Left Handed

FBR-AQ - Rotating ¼ WavePlate

FBR-AH - Rotating ½ WavePlate

FBR - Rotating Linear Polarizer

PBB - Calcite Walk-OffPolarizer

MYOB -VR

½

¼

¼

LP

FBR FBR – ½” Rotating Optic Mount

Polarization components

FT-SM05 - ½” optic Mount

H1C – Isolator Mount

HCBHCB HCB - Block mount

HWXYT - Tweaker Module**There is a movable plate on this part which helps to divert the beam path, therefore the plate may extend outside of the box shown here.

MYOB -VL

MYOB -HL

MYOB -HR

FT-EOMA: EO Modulator mount

Empty Mounts Polarizing Beamsplitter Modules

FiberPort Coupler/Collimator

PBB

Right Handed

FT-E0MA

½LP

PBB

FBR

HWXYT

HW

XY

T

FBT-PBS052FBT-PBS053FBT-PBS054

FBT-NIRFBT-MIR

Non-Polarizing 50:50 Beamsplitter Modules

Non-Polarizing 4:96 Beam Sampler Modules

FBT-BSF-BFBT-BSF-C

Step 3: Build your System

Sample FiberBench Systems

PBB½

PM Variable Optical Attenuator

Coupler, 1x3 Coupler, 2x4

Source 1Source 1Source 2Source 2

HW

XY

T

SM Variable Optical Attenuator(Lateral Misalignment)

PM

Fib

er

PM

Fib

er P

M Fiber

PM

Fiber PM

Fib

er

PM

Fib

er P

M Fiber

PM

Fiber SM

Fib

er

SM

Fib

er S

M Fiber

SM

Fiber

PBB

Polarization Splitter

1x4 variable coupler(Tweekers make it variable)

Sou

rce

1S

ourc

e 1

HW

XY

T

HWXYT

HWXYT HWXYT Sou

rce

1S

ourc

e 1

LP