FIREFIGHTING NOZZLES, VALVES & ACCESSORIES MADE IN USA

FIREFIGHTING NOZZLES, VALVES & ACCESSORIESMADE IN USA

Phone: +1 303 421 2001 WWW.SHPRODUCTSINC.COM PRODUCT CATALOG

2 Phone: +1 303 421 2001 WWW.SHPRODUCTSINC.COM PRODUCT CATALOG

Fire Fighting Nozzles

Patriot Variable Smoothbore Nozzle

p at r i o tV A R I A B L E S M O O T H B O R E

Based on calculated values

• Unequalled solid stream performance, penetration and maximum reach at pressures as low as 55 psi

• Requires minimal training and maintenance• Integrated stream straightener• Optional shut-off valve with or without pistol grip• Versatile: Eliminate necessity of carrying up to 5

stacked tips• Water Conservation: High flow when you need it and

lower flow when you don’t• Adaptable: Detaches from SOV to remove

blockages, change apparatus or lay more hose line• Save time: No shut down necessary to change

settings/tip sizes continuous operation• Class A, B foams and CAFS compatible

P/N: NZ-VSB-15

The PATRIOT variable smoothbore fire fighting nozzle produces an adjustable solid stream with 5 different flow rates. With just a twist of the bumper of the nozzle, firefighters can set the flow rate without stopping to change tips.

Ozone resistant neoprene bumper Knurled body for improved grip in wet conditions

1.5” Female NH threaded inlet

Adjustable GPM with smoothbore performance5 orfice/flow settings

Exit

Stre

am D

iam

eter

Exit Stream Diameter Vs. Volume Flow (GPM)

3Phone: +1 303 421 2001 WWW.SHPRODUCTSINC.COM PRODUCT CATALOG

Fire Fighting Nozzles

3/4” 1” Dual Range Combination 3/4” 1” Constant Flow Combination

• 10/30 GPM full fog or straight stream • Heavy duty moulded bumper• Twist shut-off• Hard anodized aluminum construction• Weight: 0.7 lb.P/N: NZ-DR-1 (FNH or FNP) NZ-DR-34GHT

• 30 GPM full fog or straight stream • Heavy duty moulded bumper and

twist shut-off• Hard anodized aluminum

construction• Weight: 0.7 lb. P/N: NZ-CF-1 (FNH or FNP)NZ-CF-34GHT

• 20/60 GPM or 20/90 GPM @100 psi• Full fog or straight stream • Heavy duty moulded bumper• Twist shut-off • Hard anodized aluminum construction• Weight: 1.0 lb. P/N: NZ-DR60-15 or NZ-DR90-15 (FNH or FNP)NSN: 4210-01-017-1123NFES: 1082

• 60 GPM or 100 GPM• Full fog or straight stream • Heavy duty moulded bumper and

twist shut-off • Hard anodized aluminum

construction• Weight: 1.0 lb. P/N: NZ-CF60-15 or NZ-CF100-15

• 20/60 GPM or 20/90 GPM @100 psi• Full fog or straight stream • Heavy duty moulded bumper• Twist shut-off • Hard anodized aluminum construction• Weight: 1.0 lb. P/N: NZ-HFDR60-1 or NZ-HFDR100-1 (FNH or FNP)

• 100 GPM• Full fog or straight stream • Heavy duty moulded bumper and

twist shut-off • Hard anodized aluminum

construction• Weight: 1.0 lb. P/N: NZ-CFHF100-1 (FNH or FNP)

• 10/30 GPM full fog or straight stream and twist shut-off

• Hard anodized aluminum construction• Weight: 0.6 lb. P/N: NZ-DRB-1 (FNH or FNP)NZ-DRB-34GHTNSN: 4210-01-165-6603NFES: 1081

• 60 or 100 GPM full fog or straight stream and twist shut-off

• Hard anodized aluminum construction

• Weight: 1.0 lb. P/N: NZ-CFB60-15 or NZ-CFB100-15 (FNH or FNP)

• Machined from solid brass material• 3/4” female garden hose thread

(GHT) inlet• 4 GPM spray, 8 GPM straight stream • Weight: 0.33 lb. P/N: NZ-MOP NSN: 4210-00-595-1103NFES: 0136

• Cast aluminum construction• Straight stream tip options: 3/16”,

3/8”, 1/4”• Fog tip options: 3 GPM or 6 GPM• Built-in 3 position on/off valve• 1.5 lbs.P/N: NZ-TT-1 (FNH or FNP)NSN: 4210-00-640-1892NFES: 0024

1.5” Dual Range Combination 1.5” Constant Flow Combination

1” Dual Range High-Flow Combination 1” Constant High-Flow Combination

3/4” 1” Bumper-less Dual Range Combination 1.5” Bumper-less Constant Flow Combination

Mop-Up Nozzle Twin-Tip Forestry Nozzle


Break Apart Nozzles

Shut-off Valve Rigid Body Shut-off Valve with Swivel

• Available in 1” and 1.5”• Hard anodized aluminum construction• 600 psi operating pressure• .65 lbs. and .75 lbs.P/N: SOV-RB-1 or SOV-RB-15 (FNH or FNP)

• Available in 1” and 1.5”• Hard anodized aluminum construction• 600 psi operating pressure• .75 lbs. and .85 lbs.P/N: SOV-SW-1 or SOV-SW-15 (FNH or FNP)

1” and 1.5” Break-Apart Attack Nozzle 1.5” Smoothbore Break-Apart

• Ball Shut-off valve, pistol grip with Dual Flow Nozzle• Hard anodized aluminum construction• 10/30 GPM or 20/60 GPM• Fog and straight stream with twist shut-off• Swivel female connector, aluminum horseshoe lever• 2.5 lbs.P/N: NZ-BA-1 or NA-BA-15 (FNH or FNP)

• Ball Shut-off valve with 15/16” Smoothbore tip and pistol grip• Hard anodized aluminum construction• Swivel female connector, aluminum horseshoe lever• Compatible with other smoothbore tip sizes• 2.75 lbs.P/N: NZ-BA-SB-15 (FNH or FNP)

Hydrant Gate Valve 2.5” Ball Shut-off Valve

• Available in 2.5” NH (NST) thread• Lightweight aluminum construction• 250 psi operating pressure• 3.5 lbs.P/N: HGV-R-25 (red), HGV-B-25 (black)

• Swivel connector NH (FNH) thread• Anodized aluminum body and handle• Available in 2.5” M or 1.5” M outlet• Horseshoe or 3/4 turn leverP/N: SOV-SW-25

• Swivel body with polymer pistol grip• Hard anodized aluminum construction• Available in 1” and 1.5”P/N: SOV-SWPG-1 or SOV-SWPG-15 (FNH or FNP)

Shut-off Valve Pistol Grip


1”F x (2)1”M Gated Wye

• Lightweight aluminum body• Cast aluminum handles• 600 psi operating pressure• Available in powder coated red

body• NH (FNH) or NP (FNP) thread• 3.75 lbs.P/N: WV-1NH-1NH

• Lightweight aluminum body• Cast aluminum handles• Corrosive resistant finish (CR)• 600 psi operating pressure• NH (FNH) or NP (FNP) thread• 3.75 lbs.P/N: WV-25-15


body• NH (FNH) or NP (FNP) thread• 3.8 lbs.P/N: WV-15-15



body• NH (FNH) or NP (FNP) thread• 3.4 lbs.P/N: WV-15-1


• Lightweight aluminum body• Short “no snag” aluminum

handles• 600 psi operating pressure• NH (FNH) or NP (FNP) thread• 3.75 lbs.P/N: WV-SH-15-15

• Lightweight aluminum body• Short “no snag” aluminum

handles• Corrosive resistant finish (CR)• 600 psi operating pressure• NH (FNH) or NP (FNP) thread• 3.75 lbs.P/N: WV-25-15

2.5”F x (2) 1.5”M Wye 1.5”F x (2)1.5”M Wye

2.5”F x (2) 2.5”M Wye

1.5”F x (2)1”M Wye

1.5”F x (2)1.5”M Wye

Short Handle Wye

2.5 x (2)1.5 Short Handle

WYE Valves

Cast aluminum S&H Gated WYE Valves are ultra light weight and durable. These WYE valves are built to meet the US National Fire Equipment Systems (NFES) specifications and are certified at 600 psi working pressure and 1,200 psi stagnant pressure. The internal polymer ball and seating reduces friction while operating. Available in a variety of sizes, thread types, and finishes.

Gated WYE Valves


• Lightweight aluminum construction

• 1”NP inline male and female threads

• 1”NP “T”• Cap and chain included• Meets NFES

specificationsNSN 4210-01-080-1459 NFES 0731P/N: T-1NP-1NP


• 1”NP inline male and female threads

• 3/4”GHT “T”• Cap and chain included• Meets NFES

specificationsNSN 4210-01-080-0418 NFES 1809P/N: T-1NP-34GHT


• 1.5”NH inline male and female threads

• 1”NP “T”• Cap and chain included• Meets NFES

specificationsNSN 4210-01-080-1460 NFES 2240P/N: T-15NH-1NP

• Lightweight aluminum construction with brass stem

• NH (FNH) or NP (FNP) thread

• Meets NFES specifications

NSN 4210-01-081-0417 NFES 0230P/N: TV-15NH-1NH

In-Line Tees & Smoothbore Nozzles

1” x 1” Tee 1” x 3/4” Tee 1.5” x 1” Tee 1.5” NH x 1” Tee

1.5” NH Stackable Smoothbore Nozzle

The Stacked Tip Nozzle is constructed from lightweight anodized aluminum. This nozzle is available 1.5” NH inlet with 1-1/4”, 1-1/8” and 1” outlets.P/N: NZ-ST-15NH

• Anodized aluminum construction

• Tip sizes: 1/2”, 3/8”, 3/4”, 15/16”, 1”, 1 1/16”, 1 1/8”, 1 1/4”

• 1/2 lb.P/N: NZ-SB-15 or NZ-SBT-15

Crown Tip Smoothbore Nozzles

• Available in 1” inlet NH (FNH) or NP (FNP) thread


• Outlet/Tip sizes: 3/16”, 1/4”, 3/8”, 1/2”, 3/4”, 15/16”

• 3/8 lb.P/N: NZ-SB-1

• Available in 1” inlet NH (FNH) or NP (FNP) thread


• Outlet/Tip sizes: 3/16”, 1/4”, 3/8”

• 3/8 lb.P/N: NZ-SBT-1

Tapered Smoothbore Nozzles1.5” NH Crown Tip or Tapered


AccessoriesApplicator Wand 2 Piece

• Available in 3/4” GHT• 4’ Aluminum tube with brass

connectors and tip• Sizes: 1/2”, 3/8”, 3/4”, 15/16”,

1”, 1 1/16”, 1 1/8”, 1 1/4”• Meets NFES specificationsP/N: APP-2 or APP-3

• For use with single jacket 1” and 1.5” hose

• Lightweight aluminum construction with brass locking yoke

• Built-in spanner• Meets NFES specificationsP/N: HC-15

• Lightweight aluminum• Fits 1”, 1.5” and 2.5” rocker

lug couplings• Meets NFES specifications P/N: SW-2

• Lightweight anodized aluminum


• Available in 3/4” GHT• Solid brass• Meets NFES specificationsP/N: APP-4

• Lightweight aluminum• Fits 1” and 1.5” rocker lug

couplings• Meets NFES specifications P/N: SW-1

• Lightweight anodized aluminum


• Available in 3/16” 1/4” 3/8” tip• 3/4” GHT thread• Aluminum construction• EPDM gasket• Meets NFES specificationsP/N: NZ-SS

• Available in tip number 3 and 6

• 3/4” GHT thread• Aluminum construction• EPDM gasket• Meets NFES specificationsP/N: NZ-FS

1.5” Forestry Hose Clamp

Double Ended Spanner

1”NP(F) x 3/4”NH(M) Reducer

1.5” NH(F) x 1” NP(M) Reducer

Brass 3/4” Spray Tip Single Ended Spanner

Straight Stream Tip

Fog Spray Tip

http://www.shproductsinc.come-mail: [email protected]

Phone: +1 303 421 2001Fax: 303 421 1945

5891 Nolan St Unit 1 Arvada, CO 80003

S&H Fire Products is a family owned and operated business. S&H Fire Products oversees each step from concept, design, manufacturing, and testing from its own manufacturing facility in Arvada Colorado, USA. This enables the company to control the highest level of workmanship, as well as deliver these products at unparalleled value.

The company is an official supplier to the U.S. General Services Administration (GSA), the U.S. Forest Service, and the Defence Logistics Agency (DLA). Our products are designed for use in wildland firefighting and are versatile enough to be effective in structure fires.

For nearly three decades the US Government and fire fighters across the world have been trusting S&H Fire Products to assist them in saving lives and property. S&H Fire Products is committed to the highest standard of quality, the satisfaction of our customers, and the well being of our employees, our community, and the environment.

PROUDLY MADE IN THE USA

Documents

FIREFIGHTING NOZZLES, VALVES & ACCESSORIES MADE IN USA