TEKNIA GROUP
SALES +49 (0) 711 553 462 72 ENGINEERING +49 (0) 711 248 639 06 E-mail www.tekniagroup.com
PRODUCTION SITES MACHINING METALLIC PLASTIC R&D OFFICES Brazil Brazil Brazil Germany Mexico Mexico Czech Republic Spain Poland Poland Mexico Spain Serbia Morocco Spain Poland Serbia Spain
SOCIAL MEDIA FOLLOW NOW
HEADQUARTERS Bilbao/ Madrid Spain
COMERCIAL AND TECHNICAL OFFICES Michigan USA Seoul South Korea Shenzhen China
FLASH NEWS REPORT
Teknia Uhersky Brod, has been audited and approved by China Centre.
Successful Audit of the Plant
et me inform you that one of our plants - Teknia Uhersky Brod, has been audited
approval in order to enter the Chinese market.
products in order to be able to import products into China.
The components being tested are: Cover KAB LHD MFA W176 Cover knee Driver L538
audit and throughout the whole process!
L Teknia Rzeszów will produce 70% of the reservoirs for Bosch during 2017-2020.
Manufacturing Agreement to produce RSV for BOSCH
D uring the first week of October, the members of the team from Teknia Rzeszów managed to get signed a contract to produce
in terms of turnover BOSCH is the most important client for the group.
technology, consumer goods and
BOSCH registered €48.9 billion in
that in 2011 BOSCH registered a year- on-year growth rate of almost 27% being the best year in the 125 year- old history.
along with this manufacturing agreement means a huge success for the group reassuring a prosperous future for the Polish plant for which this agreement will bring around €12 million for an annual turnover.
signing of the agreement
www.tekniagroup.com
Page 3
Page 4
Page 5
Page 2
2 43
www.tekniagroup.com www.tekniagroup.comwww.tekniagroup.com
n 2015 Teknia Elorrio achieved several crucial objectives and managed to exceed the target of the business bookings set in the budget. What is most important about these projects is its scope: all of these will be addressed to produce our key products such as tubes for cooling system and engine bay. More than €6M promise the development of the plant in the future years and enable to strengthen the professional relationships with some of our clients such as Cikautxo and Avón. Another important achievement has been the direct collaboration with two important OEM’s: VW and Renault, which in total will provide business of more than €4M.
This accomplishment is due to the effort and hard work done by the commercial team of Teknia Elorrio in the last few years promoted by the plant’s ability of constant development and chief quality of the products providing our clients with the complete trust in our capacity. We cannot forget to mention the synergies with other Teknia plants and the sales office in Germany.
Hopefully the plant will continue with its successful job in the next years as well as in 2015!
I
Teknia Group appointments and incorporations
ince there have been several organizational changes in Teknia Group, we would like to refresh your memory and update you on the recent promotions and new incorporations since our last FNR.
Please find shown below the latest changes following a chronological order
S
New projects are of strategic products.
Name Pawel Raczkowski New position Managing Director Teknia Germany As of 1st October 2015
Name Pablo Quesada New position KPM Machining Division As of 1st October 2015
Name Fernando Aguilar New position Quality Director Plastic Division As of 2nd November 2015
Name Johanna Mandolla New position KPM Metallic Division As of 1st October 2015
Name Leyre Quesada New position Technical Director Plastic Division As of 2nd November 2015
Name Covadonga Álvarez Layna New position Engineering Manager TAZ As of 2nd November 2015
Tomasz Kwinta, Teknia Kalisz employee, represents Teknia in 7 Valleys Running Race.
TEKNIA KALISZ 7 Valleys Running Race
n 12th September 2015 Teknia Kalisz employee, Mr. Tomasz Kwinta, running in the colors of Teknia Team, competed in “7 Valleys Race”. This race is a part of the Polish Championship in long distance mountain running being celebrated at the Running Festival in Krynica Zdroj. The distance was 100 km with a total height difference of 4500m.
Tomasz came in 42nd (out of 146) in his category M-40 with time of 14h 11 min 18 s.
His adventure with running began 6 years ago. He has completed 7 half marathons with the best result 1:29:47, 8 marathons with the best time of 3:28:26. He also completed 5 ultra runs (longer than marathon). This year he is still planning to run Poznan Marathon and several shorter races representing Teknia Team on the national level.
Teknia would like to congratulate Tomasz on his admirable results and thank him for competing in the colours of Teknia!
O
2 43
www.tekniagroup.com www.tekniagroup.comwww.tekniagroup.com
n 2015 Teknia Elorrio achieved several crucial objectives and managed to exceed the target of the business bookings set in the budget. What is most important about these projects is its scope: all of these will be addressed to produce our key products such as tubes for cooling system and engine bay. More than €6M promise the development of the plant in the future years and enable to strengthen the professional relationships with some of our clients such as Cikautxo and Avón. Another important achievement has been the direct collaboration with two important OEM’s: VW and Renault, which in total will provide business of more than €4M.
This accomplishment is due to the effort and hard work done by the commercial team of Teknia Elorrio in the last few years promoted by the plant’s ability of constant development and chief quality of the products providing our clients with the complete trust in our capacity. We cannot forget to mention the synergies with other Teknia plants and the sales office in Germany.
Hopefully the plant will continue with its successful job in the next years as well as in 2015!
I
Teknia Group appointments and incorporations
ince there have been several organizational changes in Teknia Group, we would like to refresh your memory and update you on the recent promotions and new incorporations since our last FNR.
Please find shown below the latest changes following a chronological order
S
New projects are of strategic products.
Name Pawel Raczkowski New position Managing Director Teknia Germany As of 1st October 2015
Name Pablo Quesada New position KPM Shifters As of 1st October 2015
Name Fernando Aguilar New position Quality Director Plastic Division As of 2nd November 2015
Name Johanna Mandolla New position KPM Household Appliances As of 1st October 2015
Name Leyre Quesada New position Technical Director Plastic Division As of 2nd November 2015
Name Covadonga Álvarez Layna New position Engineering Manager TAZ As of 2nd November 2015
Tomasz Kwinta, Teknia Kalisz employee, represents Teknia in 7 Valleys Running Race.
TEKNIA KALISZ 7 Valleys Running Race
n 12th September 2015 Teknia Kalisz employee, Mr. Tomasz Kwinta, running in the colors of Teknia Team, competed in “7 Valleys Race”. This race is a part of the Polish Championship in long distance mountain running being celebrated at the Running Festival in Krynica Zdroj. The distance was 100 km with a total height difference of 4500m.
Tomasz came in 42nd (out of 146) in his category M-40 with time of 14h 11 min 18 s.
His adventure with running began 6 years ago. He has completed 7 half marathons with the best result 1:29:47, 8 marathons with the best time of 3:28:26. He also completed 5 ultra runs (longer than marathon). This year he is still planning to run Poznan Marathon and several shorter races representing Teknia Team on the national level.
Teknia would like to congratulate Tomasz on his admirable results and thank him for competing in the colours of Teknia!
O
2 43
www.tekniagroup.com www.tekniagroup.comwww.tekniagroup.com
n 2015 Teknia Elorrio achieved several crucial objectives and managed to exceed the target of the business bookings set in the budget. What is most important about these projects is its scope: all of these will be addressed to produce our key products such as tubes for cooling system and engine bay. More than €6M promise the development of the plant in the future years and enable to strengthen the professional relationships with some of our clients such as Cikautxo and Avón. Another important achievement has been the direct collaboration with two important OEM’s: VW and Renault, which in total will provide business of more than €4M.
This accomplishment is due to the effort and hard work done by the commercial team of Teknia Elorrio in the last few years promoted by the plant’s ability of constant development and chief quality of the products providing our clients with the complete trust in our capacity. We cannot forget to mention the synergies with other Teknia plants and the sales office in Germany.
Hopefully the plant will continue with its successful job in the next years as well as in 2015!
I
Teknia Group appointments and incorporations
ince there have been several organizational changes in Teknia Group, we would like to refresh your memory and update you on the recent promotions and new incorporations since our last FNR.
Please find shown below the latest changes following a chronological order
S
New projects are of strategic products.
Name Pawel Raczkowski New position Managing Director Teknia Germany As of 1st October 2015
Name Pablo Quesada New position KPM Machining Division As of 1st October 2015
Name Fernando Aguilar New position Quality Director Plastic Division As of 2nd November 2015
Name Johanna Mandolla New position KPM Metallic Division As of 1st October 2015
Name Leyre Quesada New position Technical Director Plastic Division As of 2nd November 2015
Name Covadonga Álvarez Layna New position Engineering Manager TAZ As of 2nd November 2015
Tomasz Kwinta, Teknia Kalisz employee, represents Teknia in 7 Valleys Running Race.
TEKNIA KALISZ 7 Valleys Running Race
n 12th September 2015 Teknia Kalisz employee, Mr. Tomasz Kwinta, running in the colors of Teknia Team, competed in “7 Valleys Race”. This race is a part of the Polish Championship in long distance mountain running being celebrated at the Running Festival in Krynica Zdroj. The distance was 100 km with a total height difference of 4500m.
Tomasz came in 42nd (out of 146) in his category M-40 with time of 14h 11 min 18 s.
His adventure with running began 6 years ago. He has completed 7 half marathons with the best result 1:29:47, 8 marathons with the best time of 3:28:26. He also completed 5 ultra runs (longer than marathon). This year he is still planning to run Poznan Marathon and several shorter races representing Teknia Team on the national level.
Teknia would like to congratulate Tomasz on his admirable results and thank him for competing in the colours of Teknia!
O
5
TEKNIA GROUP
SALES +49 (0) 711 553 462 72 ENGINEERING +49 (0) 711 248 639 06 E-mail www.tekniagroup.com
PRODUCTION SITES MACHINING METALLIC PLASTIC R&D OFFICES Brazil Brazil Brazil Germany Mexico Mexico Czech Republic Spain Poland Poland Mexico Spain Serbia Morocco Spain Poland Serbia Spain
SOCIAL MEDIA FOLLOW NOW
HEADQUARTERS Bilbao/ Madrid Spain
COMERCIAL AND TECHNICAL OFFICES Michigan USA Seoul South Korea Shenzhen China
FLASH NEWS REPORT
Teknia Uhersky Brod, has been audited and approved by China Centre.
Successful Audit of the Plant
et me inform you that one of our plants - Teknia Uhersky Brod, has been audited
approval in order to enter the Chinese market.
products in order to be able to import products into China.
The components being tested are: Cover KAB LHD MFA W176 Cover knee Driver L538
audit and throughout the whole process!
L Teknia Rzeszów will produce 70% of the reservoirs for Bosch during 2017-2020.
Manufacturing Agreement to produce RSV for BOSCH
D uring the first week of October, the members of the team from Teknia Rzeszów managed to get signed a contract to produce
in terms of turnover BOSCH is the most important client for the group.
technology, consumer goods and
BOSCH registered €48.9 billion in
that in 2011 BOSCH registered a year- on-year growth rate of almost 27% being the best year in the 125 year- old history.
along with this manufacturing agreement means a huge success for the group reassuring a prosperous future for the Polish plant for which this agreement will bring around €12 million for an annual turnover.
signing of the agreement
www.tekniagroup.com
Page 3
Page 4
Page 5
Page 2
5
TEKNIA GROUP
SALES +49 (0) 711 553 462 72 ENGINEERING +49 (0) 711 248 639 06 E-mail www.tekniagroup.com
PRODUCTION SITES MACHINING METALLIC PLASTIC R&D OFFICES Brazil Brazil Brazil Germany Mexico Mexico Czech Republic Spain Poland Poland Mexico Spain Serbia Morocco Spain Poland Serbia Spain
SOCIAL MEDIA FOLLOW NOW
HEADQUARTERS Bilbao/ Madrid Spain
COMERCIAL AND TECHNICAL OFFICES Michigan USA Seoul South Korea Shenzhen China
FLASH NEWS REPORT
Teknia Uhersky Brod, has been audited and approved by China Centre.
Successful Audit of the Plant
et me inform you that one of our plants - Teknia Uhersky Brod, has been audited
approval in order to enter the Chinese market.
products in order to be able to import products into China.
The components being tested are: Cover KAB LHD MFA W176 Cover knee Driver L538
audit and throughout the whole process!
L Teknia Rzeszów will produce 70% of the reservoirs for Bosch during 2017-2020.
Manufacturing Agreement to produce RSV for BOSCH
D uring the first week of October, the members of the team from Teknia Rzeszów managed to get signed a contract to produce
in terms of turnover BOSCH is the most important client for the group.
technology, consumer goods and
BOSCH registered €48.9 billion in
that in 2011 BOSCH registered a year- on-year growth rate of almost 27% being the best year in the 125 year- old history.
along with this manufacturing agreement means a huge success for the group reassuring a prosperous future for the Polish plant for which this agreement will bring around €12 million for an annual turnover.
signing of the agreement
www.tekniagroup.com
Page 3
Page 4
Page 5
Page 2
1
2
3
4
5
6