AQUAFIN®-2K/Mw

ww

.aquafi

n.n

et

Building Product SystemsWaterproofing & Concrete Restoration

Decorative Coatings

Moisture Vapor Remediation & Flooring

Injection Grouting

Flexible CementitiousWaterproofing

AQUAFIN®-2K/M is a state of the art, highly flexible, protective and waterproof coating, ideal for sealing and coating a wide variety of projects.

AQUAFIN®-2K/M was developed due to a demand for a truly flexible coating, not only in terms of physical properties, but also in terms of applications and application methods. It is a two-component product resistant to water, moisture and abrasion, and composed of a cementitious powder and solvent free liquid. It has superior adhesion to many substrates, including concrete, brick, masonry and some natural stone substrates.

AQUAFIN®-2K/M is a leader in its class with up to 70% elongation, making it the perfect solution for waterproofing substrates prone to movement and cracking.

Unmatched flexibility for superior crack bridging capabilities

Advantages:

UV resistant

Self curing

Easy application

Solvent free – environmentally friendly

Available in several colors

Can be painted for uniform color

Applied to moist or damp substrates

Withstands pedestrian and light traffic; resists mechanical wear, abrasion and de-icing salts

Resists strong hydrostatic pressure (tested up to 460 ft. [140 m] water head, positive side)

Permanently flexible coating, elongation up to 70% (gray)

Crack bridging up to 1/16” (1.5 mm)

Meets or exceeds ANSI 118.10 and ANSI 118.12 (standard performance)

Proven product with 30+ years track record in Europe, 10+ years in the USA

Flex

ible

Cem

entitious

Wate

rpro

ofi

ng

Flexibility in waterproofing…

Typical Applications:

AQUAFIN®-2K/M is applied on new and old substrates to provide a protective, waterproof coating. It is a stand alone product that can be left as a finished surface or easily tiled or coated with mortars, stuccos, etc.

Typical applications include:

Swimming pools (tiled/untiled)

Marine and zoo aquarium tanks

Plaza decks and patios

Balconies, parapet walls, planter boxes

Mechanical rooms

Underneath flexible tile mortars in kitchens, bathrooms, swimming pools, balconies, etc.

Water and waste water treatment tanks

Above and below grade, interior or exterior

Foundations

AQ

UA

FIN

®-2

K/M

AQ

UA

FIN

®-2

K/M

Application:

AQUAFIN®-2K/M can be applied with a brush, roller, trowel or appropriate compressed-air spray equipment.

The two components are simply mixed together to create a workable consistency for easy applications. 2K/M has a pot life of approximately 45 minutes at 68° F (20° C).

AQUAFIN®-1KApplied as first coat, under 2K/M where negative side water pressure can be expected.

Accessory Products:

JOINT SEALING TAPE- 2000/2000-S Elastomeric, highly tear resistant waterproof tape used to repair cracks and seal joints within the 2K/M waterproofing system.

2x2 or 4x4 MESH Alkali resistant, fibreglass mesh, used to reinforce the tear resistance of 2K/M.

SEALING GASKET-18/18 Elastomeric pipe penetration sealing gasket.

FIX 10-S 30 sec, plug cement.

PLUG-IC 1-2 mins, fast setting crystalline waterstop and patching mortar.

MORTAR-LN Universal waterproofing, structural repairing & lining mortar with hydrophobic properties.

MORTAR-40 High early strenght polymer modified structural repair mortar.

AQUAFIN®-2K/M is available in several different colors and can be painted or topcoated, providing designers and applicators with limitless possibilities for their finished applications.

For complete application instructions and product information consult the current valid technical datasheet available online at www.aquafin.net.

JOINT SEALING TAPE-2000

4x4 MESH

SEALING GASKET-18/18

AQUAFIN®-1K

Spray application of a swimming pool

Roller application in a zoo exhibit

Brush application on a dam

Sample Applications

Here are a few examples of AQUAFIN®-2K/M applications.

Material application: Finished project:

Trowel application under tiles

04/

11 A

K/ED

/JD

Production and quality control:

AQUAFIN®-2K/M is produced in Elkton, MD, USA.

AQUAFIN, Inc. is a member of AQUAFIN International GmbH.

Other facilities are located in Egypt, Germany (2), India, Italy, Kazakhstan, Mauritius, Pakistan, Poland, Slovakia, Switzerland & Turkey. All AQUAFIN products go through effective quality control in the QC-laboratories at the plant site.

AQUAFIN, Inc.Triumph Industrial Park505 Blue Ball Rd., #160Elkton, MD 21921Toll Free: 1-866-AQUAFINPhone: (410) 392-2300Fax: (410) 392-2324E-mail: info@aquafin.netweb: www.aquafin.net

AQUAFIN Inc. plant inElkton, MD, USA

Distributed by: