Fountain Catalogue

We move water.

CATALOGUE OFFOUNTAINTECHNOLOGY

Fountain units Nozzles Nozzles Light Power Filtration Accessories

3

OASE

How you will find us ...

B.V.B.A. OASEBelgium, Netherlands, FranceAssesteenweg 91730 AsseBelgiumTel.: +32 2 4 53 06 66Fax: +32 2 4 53 07 60

OASE Kereskedelmi KftBuda CenterHegyalja út 7-131016 BudapestHungaryTel.: +36 1 3 93 50 40Fax: +36 1 3 93 50 41

OASE Asia Pacific545 Orchard Road#12-11 Far East S.C.Singapore 238882SingaporeTel.: +65 673 27 70 5Fax: +65 673 27 70 3

OASE UK Ltd.3 Telford GateWhittle RoadWest Portway Industrial EstateAndoverHampshireSP10 3SFUnited KingdomTel.: +44 12 64 33 32 25Fax: +44 12 64 33 32 26

4

OASE

How you will find us ...

OASE GmbHTecklenburger Str. 16148477 Hörstel/GermanyTel.: +49 (0 54 54) 80-0Fax: +49 (0 54 54) 80-92 70E-Mail: [email protected]: www.oase-pumpen.com

5

Index

Complete Fountain units Page 7 - 34

Nozzles Page 35 - 64

Pumps Page 65 - 80

Light Page 81 - 106

Power Page 107 - 128

Filtration Page 129 - 138

Accessories Page 139 - 166

OASE-typical Abbrevations

6

A . . . . . . . . . . . .surface(mm2, cm2, m2)AF . . . . . . . . . . .filter surface (mm2, cm2, m2)ASW . . . . . . . . .angle of beaml (°,degree)b, b1, b2, b3 . . .width (mm, m)d, d1, d2, d3 . . .diameter (mm, m)Da . . . . . . . . . . .diameter, external (mm, m)DAS . . . . . . . . . .nozzle orifice (mm)DD . . . . . . . . . . .diameter, delivery port (mm)DDB . . . . . . . . . .nozzle pressure requirement (m. Head, bar)DDG . . . . . . . . . .largest nozzle diameter (mm)Di . . . . . . . . . . . .diameter internal (mm, m)DID . . . . . . . . . . .diameter of nozzle injector - (mm)DN . . . . . . . . . . .nominal diameter (mm, m)DNa . . . . . . . . . .nominal diameter outlet (mm, m)DNe . . . . . . . . . .nominal diameter inlet (mm, m)DS . . . . . . . . . . .diameter suction port (mm)DAW . . . . . . . . .nozzle inclination angle (°,degree)DSD . . . . . . . . . .nozzle spray diameter (mm, m)DWB . . . . . . . . . .nozzle water requirement (L/min)E . . . . . . . . . . . .illumination power (lx, Lux)FH . . . . . . . . . . .fountain heightFL . . . . . . . . . . . .flangeG . . . . . . . . . . . .thread (", inch)GW . . . . . . . . . .weight(kg, kilogram)h, h1, h2, h3 . . . .height (mm, m)H . . . . . . . . . . . .pump head (m. head, bar)I . . . . . . . . . . . . .electric power (A, Ampere)I . . . . . . . . . . . . .light intensity (cd, Candela)l, I1, I2,I3 . . . . . .length (mm, m)KD . . . . . . . . . . .diameter of calyxKH . . . . . . . . . . .height of calyxLW . . . . . . . . . . .clear width (mm, m)MA . . . . . . . . . . .materialMBD . . . . . . . . . .minimum pool diameter (mm, m)n . . . . . . . . . . . .rotation speed (r.p.m.)O . . . . . . . . . . . .surfacep . . . . . . . . . . . .pressure (m head, bar)P . . . . . . . . . . . .power capacity (W, Watt, kw, Kilowatt)PH . . . . . . . . . . .parabolic height (m)PH% . . . . . . . . . .parabolic height (%,percent)PN . . . . . . . . . . .nominal pressure (bar)PW . . . . . . . . . . .parabolic length (m)Q . . . . . . . . . . . .output, volume stream (l/sec., l/min., m3/h)r . . . . . . . . . . . . .radius (mm, m)R . . . . . . . . . . . .electr. resistance (Ohm)RRW . . . . . . . . . .pipe friction (m head/m)SB . . . . . . . . . . .gap width (mm)SL . . . . . . . . . . . .gap length (mm)SPB . . . . . . . . . . .spray width (m)s . . . . . . . . . . . . .thickness, wall size (mm)t . . . . . . . . . . . . .time, period, durationU . . . . . . . . . . . .voltage (V, Volt)v . . . . . . . . . . . . .stream velocity (m/sec.)w . . . . . . . . . . . .distance from water level (mm)x, x1, x2, x3 . . . .distance, general (mm, m)z . . . . . . . . . . . .quantity, generalza . . . . . . . . . . . .quantity outletszd . . . . . . . . . . . .quantity nozzlesze . . . . . . . . . . . .quantity inletszl . . . . . . . . . . . .quantity holes zp . . . . . . . . . . . .quantity pumpszs . . . . . . . . . . . .quantity lights

Complete Fountain Units, Floating Fountain Unitsand Complete Fountain Systems

• Complete Fountain Units page 08

• Floating Fountain Units page 16

• Aqua-Media Systems page 26

• Vario Switch Systems page 28

• Lace Fountain Systems page 30

• Jumping Jet Systems page 32

No. Type Pump Nominal Nominal Nominal Nozzle Qty. Fountain height Ref.-Dia.voltage (V) power (kW) current (A) (m) (m) (m)

Units with nozzles Cascade 70 T1 AG 413/3/C70/0,60 USP 413 D 3 x 400 0,49 0,95 C 70 T 3 0,60 0,75

Units with nozzles Cascade 90 T2 AG 412/1/C90/1,5 USP 412 W 1 x 230 0,52 2,20 C 90 T 1 1,503 AG 22-33/1/C90/5,00 SPA 22-33 3 x 400 2,20 6,05 C 90 T 1 5,004 AG 35-43/1/C90/11,00 SPA 35-43 3 x 400 4,00 9,60 C 90 T 1 11,005 AG 513/3/C90/0,50 USP 513 D 3 x 400 0,77 1,30 C 90 T 3 0,50 0,756 AG 662/3/C90/1,00 USP 662 W 1 x 230 1,12 4,70 C 90 T 3 1,00 0,757 AG 663/3/C90/1,50 USP 663 D 3 x 400 1,18 2,10 C 90 T 3 1,50 0,758 AG 813/3/C90/2,00 USP 813 D 3 x 400 1,50 2,90 C 90 T 3 2,00 0,759 AG 58-23/3/C90/4,00 SPA 58-23 3 x 400 3,00 7,30 C 90 T 3 4,00 1,00

10 AG 58-33/3/C90/5,00 SPA 58-33 3 x 400 5,50 13,60 C 90 T 3 5,00 1,00

Units with nozzles Cascade 110 T11 AG 813/1/C110/3,00 USP 813 D 3 x 400 1,50 2,90 C 110 T 1 3,5012 AG 100-13/3/C110/3,00 SPA 100-13 3 x 400 5,50 13,60 C 110 T 3 3,00 1,0013 AG 162-13/3/C110/8,00 SPA 162-13 3 x 400 11,00 24,80 C 110 T 3 8,00 1,00

Units with nozzles Cascade 130 T14 AG 162-13/3/C130/5,00 SPA 162-13 3 x 400 11,00 24,80 C 130 T 3 5,00 1,0015 AG 280-13/3/C130/9,00 SPA 280-13 3 x 400 18,50 42,00 C 130 T 3 9,00 1,00

Units with nozzles Geiser 40 T16 AG 503/3/G40/2,00 USP 503 D 3 x 400 1,00 1,80 G 40 T 3 2,00 0,7517 AG 35-33/3/G40/7,00 SPA 35-33 3 x 400 3,00 7,90 G 40 T 3 7,00 1,00

8

COMPLETE FOUNTAIN UNITS

• Wide selection with different water patterns

• Variable fountain heights

• Underwater illumination- optional

• Solid and stable construction

• Corrosion resistant

• Simple Installation

• Prefabricated Units

OASE-complete fountain unitsare ready-assembled sets consi-sting of pump, regulator valve,water distributor, fountain attach-ment/s and underwater illumina-tion.

They can be set into operationwithout intensive installation andassembly requirements.

OASE complete fountain unitshave good stability, and as arule, can be placed on a plainand levelled base, without speci-al fixation elements. From theextensive range of OASE acces-sories you will easily find furthercomponents, such as electric con-trol panels, underwater cable

junctions, cable lead-out fittings,overflow drain systems and freshwater make-up systems.Additional OASE water level con-trols and wind level dependantswitch off systems will ensure atrouble-free operation.

Complete Fountain Units

Water depth Art.-No. Illum. opt. Qty. Nom. volt. Nom. Power Art.-No.(m) UWS (V/50Hz) (kW)

0,60 900-018 T 111 6 12 0,050 901-018

0,53 900-028 T 111 3 12 0,050 901-0280,50 900-038 T 111 3 12 0,100 901-0380,55 900-048 T 111 3 12 0,100 901-0480,85 900-058 T 111 6 12 0,050 901-0580,75 900-068 T 111 6 12 0,050 901-0680,55 900-078 T 111 6 12 0,050 901-0780,75 900-088 T 111 6 12 0,050 901-0880,50 900-098 T 111 6 12 0,075 901-0980,50 900-108 T 111 6 12 0,075 901-108

0,80 900-118 T 111 3 12 0,075 901-1180,65 900-128 T 111 9 12 0,075 901-1280,60 900-138 T 111 9 12 0,100 901-138

0,60 900-148 T 111 9 12 0,100 901-1480,70 900-158 T 111 9 12 0,100 901-158

0,45 900-168 T 111 9 12 0,050 901-1680,50 900-178 T 111 9 12 0,100 901-178

9We reserve the right to make technical changes according to the latest technological standards and developments

10



OASE complete fountain unitshave good stability, and as arule, can be placed on a plainand levelled base, without spe-cial fixation elements.

From the extensive range ofOASE accessories you willeasily find further components,such as electric control panels,underwater cable junctions,cable lead-out fittings, overflowdrain systems and fresh watermake-up systems.

Additional OASE water levelcontrols and wind level depen-dant switch off systems willensure a trouble-free operation.

No. Type Pump Nominal Nominal Nominal Nozzle Qty. Fountain height Ref.-Dia.voltage (V) power (kW) current (A) (m) (m) (m)

Units with nozzles Geiser 60 T18 AG 35-33/1/G60/12,00 SPA 35-33 3 x 400 3,00 7,85 G 60 T 1 12,00

19 AG 58-23/3/G60/5,00 SPA 58-23 3 x 400 3,00 7,90 G 60 T 3 5,00 1,00

Units with nozzles Geiser 80 T20 AG 162-13/3/G80/9,00 SPA 162-13 3 x 400 11,00 24,8 G 80 T 3 9,00 1,00

Units with nozzles Geiser 100 T21 AG 280-2-23/3/G100/15,00 SPA 280-2-23 3 x 400 30,00 66,5 G 100 T 3 15,00 1,00

Units with nozzles Schaumsprudler 55-15 E22 AG 813/3/S55/2,00 USP 813 D 3 x 400 1,50 2,9 Sch 55-15 E 3 2,00 0,7523 AG 100-13/3/S55/5,00 SPA 100-13 3 x 400 5,50 13,6 Sch 55-15 E 3 5,00 0,7524 AG 162-1-13/6/S55/4,50 SPA 162-1-13 3 x 400 7,50 17,6 Sch 55-15 E 6 4,50 1,00

Units with nozzles Schaumquell 75-20 T25 AG 813/3/S75/3,50 USP 813 D 3 x 400 1,50 2,9 Sch 75-20 T 1 3,5026 AG 813/3/S75/0,75 USP 813 D 3 x 400 1,50 2,9 Sch 75-20 T 3 0,75 0,75


Water depth Art.-No. Illum. opt. Qty. Nom. volt. Nom. Power Art.-No.(m) UWS (V/50Hz) (kW)

0,50 900-188 T 111 3 12 0,100 901-188

0,50 900-198 T 111 9 12 0,100 901-198

0,60 900-208 T 111 9 12 0,100 901-208

0,70 900-218 MP T7 9 12 0,100 901-218

0,65 900-228 T 111 6 12 0,050 901-2280,45 900-238 T 111 9 12 0,075 901-2380,50 900-248 T 111 12 12 0,075 901-248

0,60 900-258 T 111 3 12 0,100 901-2580,75 900-268 T 111 6 12 0,050 901-268

12



Water distributorWater level

Water distributor

Water levelWater distributor

Water level

0807 09


05


06

Water level

04

Water distributor

Water level Water level

0201

Water level

03


14



Water distributor

Water level


Water levelWater distributorWater level

16 18

15

17

Water level


1413

Water distributor

Water level

Water distributorWater levelWater level

10 1211



Water distributorWater level Water distributor

Water level





Water level

2019

22 24

26

21

23

25

Special units on request.

16

FLOATING FOUNTAIN UNITS

Floating Fountain Units MINI, MIDI and MAXI

Perfect illumination gives thewater a sparkling and brilliantglow, making the water feature ahighly decorative eye catcher atnight.

Because easy to use for tempor-ary installation it is made to high-light various events giving yourenvironment a very distinct touch.

OASE Floating Fountain Units areinstalled where other standingunits can not be used because ofvariable water levels, wherewater depth is prohibitive or ground soil is unfavourable. Theyare a single unit, completely pre-mounted and ready for immedia-te operation.

The skilfully engineered ancho-ring system ensures the safety ofthe installation.

The professional switch plant,complete with all necessarysafety precautions required, gua-rantees electrical safety.

The robust floating body keepsthe unit stable on the surface,while masking the underwatertechnology. Water is drawn bythe unit just underneath the surfa-ce, thus not interfering with natu-ral underwater temperatures.

While operating the unit ensuresa supply of the necessary oxygenby circulating the water, that fishand plants thrive.

Various fountain nozzles and illumination sets are available.Beautiful water displays able tomake the looks of your pondmore attractive during the dayand even more fascinating atnight.

IlluminationFor the MINI only sets of 3 under-water lights are available. MIDIand MAXI floating fountains canbe equipped with 3, 6 or at most9 lights.

Electric Control(MIDI + MAXI)The floating fountain is suppliedwith an electric control panel,allowing the control of the pumpand of the illumination circuit.The fountain is fitted with allnecessary protection and safetydevices.

The underwater lights are availa-ble, complete with cable in setsof 3, 6 or 9 lights.

OASE Floating Fountain Units arefast and easy to install. Just floatthe fountain to the desired locati-on in the pool or lake and anchorit in place.

Thanks to their flat shape theycan even be installed in poolswith low water levels. The bodyof the floating fountains is filledwith a special foam, allowing thefountain to float just below thewater surface.

This allows all the technical wor-king parts to remain hidden, andeven fluctuating water levels haveno adverse effect on the operati-on of the fountain (except inextreme conditions), provided itdoes not fall below the minimumwater depth.

As the pump is priming justbelow the water level, the naturaltemperature layering remainsunchanged. The movement of thewater through the fountain spraypatterns helps bring needed oxy-gen to the water, thereby control-ling algae growth.

For each of the 2 floating foun-tains types MIDI and MAXI, youcan choose from 8 different, inter-changeable fountain nozzles. Thenozzles can be installed andchanged in just a few minutes.



The water display is particularlyfascinating if illuminated at night.Thanks to 3 underwater lightsType UWS K10/50 W ea. at12V, a perfect illumination of thewater display is created

Floating Fountain MINI: MINI is used, where a fixedinstallation is difficult or impossi-ble due to a boggy or hardlyaccessible pond floor.

This fountain unit will be suppliedready for installation and provi-des garden ponds and lakes withoxygen in a natural and decora-tive way. The clearly structuredwater display reaches a sprayheight of approx. 3 m at a spraydiameter of approx. 3 m.

The minimum water depth is only45 cm.

• Complete unit, inclusive nozzle and 20 m cable, ready for installation

• Timeless design, almost maintenance-free

• Fountain height up to 3m

• total weight only 9 kg

• No risk for environment, due to oil- free motors

• Minimum water depth only 45 cm

• Optional with illumination

• Alternative water effects by mounting other 1” OASE Fountain nozzles

Floating Fountain MINI (Pond Jet)

18

Technical Data:Voltage: 230 Volt/50HzPower consumption: 250 WattTurnover rate l/min.: 160 max.Head of water: 8,0 m max.Pressure side: 1 inchStrainer surface: 650 qcmConnection cable: 20 mSpray height: 3 mSpray-ø: 3 m approx. Weight 9,0 kgID.-No.: 53777

Accessories:3-underwater lights Lunaqua 10interconnected with 20 m of cable.ID.-No.: 54327

• Compact and rugged design, long lasting and corrosion resistant

• Ready for installation, complete unit including cable and electrical control

• Various interchangeable nozzles available for a variety of different water features

• Wide range of applications due to a variety in motor power in lakes, ponds and pools

• Quickly installed andalmost maintenance free

• No environmental risk due to oil-free motor

• Optional: under water lighting and anchoring system

Floating Fountain MIDI


Model designation Midi 0,37 Midi 0,55 Midi 0,75 Midi 1,10 Midi 1,50Motor (3-phase) (KW) 0,37 0,55 0,75 1,10 1,50Dia. without underwater projector (mm) 1066 1066 1066 1066 1066Dia. with underwater projector (mm) 1200 1200 1200 1200 1200Minimum depth of water (mm) 850 850 850 850 850Weight complete with control cabinet 51,0 52,0 52,0 53,0 53,0Art.-No. 924-113 924-123 924-133 924-143 924-153

Pump cable-set:MIDI 0,37 kW, cable length 50 mMIDI 0,55 kW, cable length 50 mMIDI 0,75 kW, cable length 50 mMIDI 1,10 kW, cable length 50 mMIDI 1,50 kW, cable length 50 m(non standard)

IlluminationMIDI and MAXI floating fountainscan be equipped with 3, 6 or atmost 9 lights.

Underwater Lightsfor MIDI / MAXI Art.-No. 3-light set (UWS K10, 12V/75W)2 transformers, completely cabled

990-1106-light set (UWS K10, 12V/75W)3 transformers, completely cabled


990-112Colour disks on request.

Cable Set for Underwater Lights For up to 9 underwater spotlights:Standard cable length: 50m Other lengths on request.

20


Floating Fountain MAXI

• Spray height up to 18 m,four different motor sizes available

• Various interchangeable nozzles available for a variety of differentwater features

• Complete unit including nozzle, ready for immediate start-up

• Ready for installation complete unit with electric control

• Quickly installed and almost free of maintenance

• No environmental risk due to oil free motor

• Optional: under water lighting and anchoring system

Pump-cable-setMAXI 4,0 kW, cable length 50 mMAXI 5,5 kW, cable length 50 mMAXI 7,5 kW, cable length 50 mMAXI 11,0 kW, cable length 50 m(non standard)


Model designation (electric control) Maxi 4,00 Maxi 5,50 Maxi 7,50 Maxi 11,0

Motor (3-phase) (KW) 4,00 5,50 7,50 11,00

Dia. without underwater projector (mm) 1066 1066 1066 1066

Dia. with underwater projector (mm) 1200 1200 1200 1200

Minimum depth of water (mm) 1000 1000 1000 1000

Control cabinet size (H-W-D mm) 320x320x200 640x320x200 640x320x200 640x320x200Protection Type (cabinet) IP 55 IP 55 IP 55 IP 55Input voltage (V/50 Hz) 3x400 3x400 3x400 3x400Earth leakage Circuit Breaker (ELCB) 40/0,03 40/0,03 40/0,03 40/0,03No. of timer programs 2 2 2 2Output voltage pump (V/50 Hz) 3x400 6x400 6x400 6x400Output power pump (KW) 1 x 4,0 1 x 5,5 1 x 7,5 1 x 11,1Type of motor start direct YD YD YDMotor - Nominal current (A) 10,0 13,6 17,6 24,8Motor protection (incl.) yes yes yes yesOutput voltage illumination (V/50 Hz) 1x230 1x230 1x230 1x230Output power illumin. (W - max.) 675 675 675 675No. of M-0-A switches 1 1 1 1Weight complete with control cabinet 130,0 150,0 155,0 170,0

Art.-No. 924-213 924-223 924-233 924-243

Floating-System “MAXI” with anchoring system

Underwater Lightsfor MIDI / MAXI Art.-No. 3-light set (UWS K10, 12V/75W)2 transformers, completely cabled



990-112Colour disks on request.

Cable Set for Underwater Lights For up to 9 underwater spotlights:Standard cable length: 50m Other lengths on request.

IlluminationMIDI and MAXI floating fountainscan be equipped with 3, 6 or at most9 lights.

Electric Control (MIDI and MAXI)The floating fountain is supplied with anelectric control panel, allowing the con-trol of the pump and of the illuminationcircuit. The fountain is fitted with all necessary protection and safety devices.


Fountain Nozzles MIDI

22

ArchArt.-No.: 724-604Pump Height/DiameterMIDI 0,3 kW 1,8 m / 3,2 mMIDI 0,5 kW 2,6 m / 4,4 mMlDI 0,7 kW 3,0 m / 4,8 mMIDI 1,1 kW 3,8 m / 5,2 mMIDI 1,5 kW 4,4 m / 5,6 m

Heavy Water Sky CascadeArt.-No.: 724-601 Pump Height/DiameterMIDI 0,3 kW 2,4 m / 1,1 mMIDI 0,5 kW 3,0 m / 1,2 mMIDI 0,7 kW 3,4 m / 1,3 mMIDI 1,1 kW 3,6 m / 1,4 mMIDI 1,5 kW 4,0 m / 1,5 m

Sky CascadeArt.-No.: 724-603Pump Height/DiameterMIDI 0,3 kW 1,3 m / 1,6 mMIDI 0,5 kW 1,7 m / 1,7 mMIDI 0,7 kW 2,1 m / 1,8 mMIDI 1,1 kW 3,0 m / 1,9 mMlDI 1,5 kW 3,8 m / 2,0 m

Grand GeyserArt.-No.: 724-602Pump Height/DiameterMlDI 0,3 kW 1,3 m / 0,6 mMlDI 0,5 kW 1,7 m / 0,7 mMlDI 0,7 kW 2,1 m / 0,8 mMIDI 1,1 kW 2,7 m / 0,9 mMlDI 1,5 kW 3,4 m / 1,0 m

TrumpetArt.-No.: 724-605Pump Height/DiameterMIDI 0,3 kW 1,0 m / 3,2 mMlDI 0,5 kW 1,3 m / 3,6 mMIDI 0,7 kW 1,4 m / 4,0 mMlDI 1,1 kW 2,0 m / 4,4 mMlDI 1,5 kW 2,4 m / 4,8 m

Trumpet JetArt.-No.: 724-607Pump Height/DiameterMIDI 0,3 kW 1,3 m / 2,9 mMIDI 0,5 kW 1,7 m / 3,2 mMIDI 0,7 kW 2,1 m / 3,6 mMIDI 1,1 kW 2,6 m / 4,0 mMlDI 1,5 kW 3,4 m / 4,8 m

Trumpet GeyserArt.-No.: 724-608Pump Height/DiameterMIDI 0,3 kW 1,3 m / 2,4 mMlDI 0,5 kW 1,7 m / 3,2 mMIDI 0,7 kW 2,1 m / 3,6 mMIDI 1,1 kW 2,7 m / 4,0 mMIDI 1,5 kW 3,4 m / 4,8 m

Wide TrumpetArt.-No.: 724-606Pump Height/DiameterMIDI 0,3 kW 1,0 m / 4,4 mMlDI 0,5 kW 1,2 m / 4,8 mMlDI 0,7 kW 1,4 m / 6,4 mMIDI 1,1 kW 1,7 m / 6,0 mMlDI 1,5 kW 2,1 m / 6,8 m

We reserve the right to make technical changes according to the latest technological standards and developments23

Fountain Nozzles MAXI

Wide Trumpet TArt.-No.: 724-612Pump Height/DiameterMAXI 4,0 kW 2,6 m / 11,5 mMAXI 5,5 kW 2,7 m / 11,5 mMAXI 7,5 kW 2,8 m / 13,5 mMAXI 11,0 kW 3,0 m / 14,5 m

Sky Cascade TArt.-No.: 724-609Pump HeightMAXI 4,0 kW 8,5 mMAXI 5,5 kW 10,2 mMAXI 7,5 kW 16,2 mMAXI 11,0 kW 17,9 m

Trumpet TArt.-No.: 724-611Pump Height/DiameterMAXI 4,0 kW 1,7 m / 12,0 mMAXI 5,5 kW 2,1 m / 12,0 mMAXI 7,5 kW 2,6 m / 12,0 mMAXI 11,0 kW 2,8 m / 12,0 m

Narrow Trumpet TArt.-No.: 724-610Pump Height/DiameterMAXI 4,0 kW 2,1 m / 3,5 mMAXI 5,5 kW 2,4 m / 3,5 mMAXI 7,5 kW 2,6 m / 3,5 mMAXI 11,0 kW 2,8 m / 3,5 m

Trumpet Jet TArt.-No.: 724-613Pump Height/DiameterMAXI 4,0 kW 7,7 m /8,0 mMAXI 5,5 kW 10,2 m /8,0 mMAXI 7,5 kW 11,9 m /8,0 mMAXI 11,0 kW 12,8 m /10,0 m

Fog Jet TArt.-No.: 724-615Pump Height/DiameterMAXI 4,0 kW 4,7 m / 2,8 mMAXI 5,5 kW 5,5 m / 3,2 mMAXI 7,5 kW 7,7 m / 3,2 mMAXI 11,0 kW 9,4 m / 3,6 m

Heavy Water Arch TArt.-No.: 724-616Pump Height/DiameterMAXI 4,0 kW 3,0 m / 4,0 mMAXI 5,5 kW 3,4 m / 5,0 mMAXI 7,5 kW 3,8 m / 5,0 mMAXI 11,0 kW 4,3 m / 5,0 m

Trumpet Geyser TArt.-No.: 724-614Pump Height/DiameterMAXI 4,0 kW 6,0 m / 6,4 mMAXI 5,5 kW 6,4 m / 7,2 mMAXI 7,5 kW 6,8 m / 6,4 mMAXI 11,0 kW 7,2 m / 7,2 m

24


Floating Fountain Special

The systems include electric switchplant exactly matching the powerof the pumps used in the set-upand off course obeying all inter-national safety rules.

• Special designedstainless steel floating fountains

Standard floating fountains basedon plastic or foam floats are dueto the limited payload restricted infountain height to about 20 m.

On customer demand OASE pro-vides special designed stainlesssteel solutions for spray heads upto 125 m. These floating fountainsare build modularly in a way thattransport and assembly on siteare no problem at all.

They come equipped with nozzlesrange from HS 70 to HS 130,and special design. Stainless steelpumps reliably connected withthe fountain structure are integralpart of these set-ups. As well asan anchoring system suited forwater depths beyond the usual 2 - 3 m. Even a sea water resi-stant quality can be fabricated.So applications in areas weretidal changes, wind and waveconditions do not exceed a cer-tain range are conceivable with-out a doubt.

Off course these fountains can beilluminated as well. Since the dia-meter of a typical set-up for a 60 m spray height runs up to 10 m there is space enough toaccommodate quite a number ofunderwater lights in the perimeterof the steel structure to illuminatethe fountain efficiently.


26

COMPLETE FOUNTAIN SYSTEMS

OASE Aqua-Media Systems

• For inside and outside

• Exciting water and show effects following the rhythm of music

• Computer controlled,precise water patterns

• Impressive colour light effects

• Individual design andlayout (non standard)

OASE Aqua-Media Systems offeran impressing combination oflight water and music effects. Avariety of nozzles and fountainheads of different size anddesign form a music-controlled jetdisplay with the advantage ofmultiple movements. The waterjets will rise, shape variable pat-terns, swing to the rhythm ofmusic, dance pirouettes, all of asudden will totally collapse andthen appear again in a newshape.


An acoustic and visual harmonyis created, a fascinating showwhich attracts eyes and attentionin a magic way.

Grace to the synchronous inter-play of light water and music theshow effects will get a stunningnew appearance at night time.OASE Aqua-Media systems areconstructed in a way to meet allindividual conditions anddemands. They are easily andfreely programmable to nearlyany kind of music. They are theattraction of leisure and amuse-ment parks, as well as health andrecreation centres. A wide rangeof application possibilities is in indoor areas such as commercialcentres, shopping malls, depart-ment stores, discotheques andtrade fairs and there will create aspecial touch.

28


OASE Vario-Switch Systems

pipes is totally avoided). One ofthe switches generally serves asa bypass only, but of course, ifneeded, it could be equippedwith a second nozzle as well.

• Dynamic and variable water effects ideally suited for musical foun-tains and interactive playgrounds

• Coanda effect based water switch allows for switching almost without any pressure loss

• 3 different nozzle heights can be achieved without changing the primary pressure

• All nozzle within the flow and pressure range of the switch can be applied

• Rigid and robust design due to stainless steel cover plates

• Almost maintenance free under ideal water conditions

• Easy to assemble and disassemble

• Compatible and safe handling / easy to clean

• Power saving electronic valve technology for con-trol of atmospheric air pressure

• Limited lists of spare parts (maintenance free membrane valves)

The OASE Vario-Switch is a devi-ce which combined with theappropriate nozzle, is ideally sui-ted for application in musicalfountains or more general waterfeatures with a high degree ofdynamic action. It is working likea 3/2- way valve and thus swit-ches with almost no pressure loss(Water hammer in connection

The Switching is done by a reci-procal inlet of atmospheric airpressure, utilizing the so calledCoanda effect. To establish theair supply, the Vario Switch isequipped with an extendable airpipe mounted on top of the devi-ce. By using 2 solenoid valves forair control OASE provided thepossibility, not only to switch bet-ween the “on and off” state, butholds the opportunity to go fortwo more repeatable intermedia-te states.

Each of these states means anintermediate step in the fountainheights. The 2-Valve-Technologyfurther has the advantage thatwith power-off, the air-channelsand so even the installationspace of the valves are protectedagainst water inleakage, thatdefinitely contributes to the dura-bility of the valves itself and thevalve seats.

The transit time of the switch isdepending on the flow rate andcan go as low as 0,1 s.

The two solenoid valves use 24 V DC. The supply of thenecessary four-core cable iscustomer service.

It is strongly recommended to dis-mount the Vario-Switches beforethe sudden frost.


Vario-Switch Type: 010a-24V 015a-24V

Technical Data:U norm.: 24V DC 24V DCP norm.: 2 x 8 W 2 x 8 WQ min.: 35 l/m 85 l/mH min.: 1.0 m 2.0 mQ max.: 95 l/min 325 l/minH max.: 34 m WS 30 m WSProtection class: IP58 IP58Material: PVC black/stainless steel PVC black/stainless steelWeight: 5,2 kg 6,7 kgQuality suction strainer: Ø 2 mm Ø 2 mmGuarantee: 2 Years 2 YearsArt.-No.: 56790 57435

Flow and pressure demands of Vario switch valves with recommended jet nozzles

Valve type Vario Switch 010 Vario Switch 015

Jet nozzle type Komet 10-12T Komet 10-14T Schaumsprudler 35-10 Komet 15-17 T Komet 15- 20 T Schaumsprudler 55- 15 E

Fountain height VDB VWB VDB VWB VDB VWB VDB VWB VDB VWB VDB VWB

(m) (bar) (l/min) (bar) (l/min) (bar) (l/min) (bar) (l/min) (bar) (l/min) (bar) (l/min)

0,5 0,21 27 0,25 31 0,42 38 0,16 100 0,16 102 0,50 158

1,00 0,35 37 0,46 40 0,72 49 0,22 123 0,22 125 0,92 209

1,50 0,60 46 0,66 48 0,98 57 0,32 137 0,32 139 1,42 255

2,00 0,72 50 0,86 55 1,22 63 0,42 154 0,42 155 1,92 291

2,50 0,86 55 1,06 61 1,52 70 0,52 168 0,52 169 2,48 322

3,00 1,02 60 1,32 67 1,80 76 0,62 181 0,64 185 2,80 343

3,50 1,22 65 1,55 73 2,10 81 0,72 192 0,75 195

4,00 1,38 70 1,82 79 0,82 202 0,84 206

4,50 1,64 75 1,96 82 0,92 214 0,92 216

5,00 1,82 80 2,18 87 1,02 218 1,04 230

5,50 2,10 85 3,00 96 1,12 230 1,14 241

VDB= valve pressure demand / VWB=Valve flow demand

30


Mylar Lace Fountains Systems

• Attractive design concept

• Remarkable room divider

• Effective room humidifier

supply, the mylar lace conductionplate and the underwater lights.

The OASE accessory programalso offers other components likea water treatment with the instal-lation of water softener, filteringand dosing plant.

OASE-mylar lace fountainsystems represent an inte-resting design element infountain technology.

As the water is running noise-lessly and without sprayingdownwards along the specialmylar laces, many possibleapplications are offered.

Indoors the mylar lace foun-tain can devide a room orform a glittering curtain andprovides also a suitable roomclimate.

OASE mylar fountains basically consist of a bottomwater reservoir and a waterdistribution system with a multitude of mylar nozzlesand the corresponding number of adjustable transpa-rent mylar laces. The waterreservoir comprises the complete technology - such aspump, overflow drain, freshwater refill, power


32


Jumping-Jet-Units

• Unusual water effects

• Precise and glass-clear water jets

• Spectacular integrated light-effects

• Freely programmableOASE-Easy-Control

• Silent and vibration free

• Virtually maintenance free, easy to clean

• High safety standard, even without anchorage

• Fast and easy to be mounted

• High-grade stainless steel, unique and com-pact construction

The OASE Jumping-Jet systemsoffer unusually spectacular waterdisplays that attract every onloo-ker. A precisely segmented waterjet suddenly escapes from ashooting unit, flies in a parabolicarch through the air, and disap-pears instantaneously and preci-sely into a small collection ope-ning.

Then the cycle starts again,however with a totally differentspray configuration. If the obser-ver thinks that he recognizes acertain pattern to the effects thenhe will be surprised by new andunusual variants.

The Jumping-Jet also offers thepossibility of generating a conti-nuous water arch reminiscent ofa glass rod.


OASE Jumping-Jet systems arethe attraction in amusementparks, in discos, at trade showsand exhibitions, and at otherevents

Technical note:Please be aware that water spraycan be generated when opera-ting the Jumping-Jet system.You must count on a water sprayportion of app. 2 litres per hourfor water spray segments shotrapidly in succession. Thisspraying water ratio is negligibleif the water jet is operated as afull, consistent parabola.

In the evening hours the waterdisplay takes on a fascinatingnew look when equipped withlighting. It creates the impressionthat the water jet is freely trans-porting light through the surroun-ding darkness.

OASE Jumping-Jet systems canbe combined, and they can beimplemented both indoors andoutdoors.

The basic prerequisite for lighttransport within the water jet isthat the water must be glassclear. Only then, passing throughthe jet stream of the parabola,the light can reach the landingpoint.

34


Jumping-Jet-Units

OASE-Jumping-Jet(incl. Control and pump, without illumination)

Nominal voltage control 230 V/50 HzNominal voltage mechanics 24 V DCNominal voltage pump 230 V/50 HzNominal current pump 1,25 APower consumption control 180 W approx.Power consumption mechanics 50 WPower consumption pump 280 WJet dia. 18 mmMinimum water depth 300 mmMaximum water depth 400 mmVertical swivel range 45 - 90 degreesMaterial stainless steelWeight 70 kg approx.Art.No. 950-512 ID.-No.: 53962

OASE-Jumping-Jet-Flash(incl. Control , pump and illumination)

Nominal voltage control 230 V/50 HzNominal voltage mechanics 24 V DCNominal voltage pump 230 V/50 HzNominal current pump 1,25 ANominal voltage illumination 230 V/50 HzNominal voltage mechanics 24 V DCNominal voltage pump 230 V/50 HzNominal current pump 1,25 APower consumption control 180 W approx.Power consumption mechanics 50 WPower consumption pump 280 WPower consumption illumination 75 WJet dia. 18 mmMinimum water depth 300 mmMaximum water depth 400 mmVertical swivel range 45 - 90 degreesMaterial stainless steelWeight 71 kg approx.Art.-No.: 950-510ID.-No.: 53961

Fountain Nozzlesand Attachments

• Single Jet Nozzles page 36

• Multi Jet Nozzles page 40

• Rotating Nozzles page 46

• Water Film Nozzles page 48

• Foam Effect Nozzles, waterlevel-independent page 54

• Foam Effect Nozzles, water level-dependent page 56

• Sphere Effect Nozzles page 60

• Well Water Effects page 62

36

SINGLE JET NOZZLES

Komet 3-3 T to 15-20 T

• Clear, wind stable,and full stream jet

• Independent from water level

• With flow adjuster

• With adjustable ball joint

The OASE Komet single jet nozz-les are small and medium sizeprecision nozzles, producing afull, clear and wind stable jet.

They may be used to produce asingle jet or can be combined ingroups of several nozzles

Each Komet nozzle incorporatesa ball joint so that the jet can beinclined by up to 12° from thevertical. This allows for a varietyof different patterns.

37We reserve the right to make technical changes according to the latest technological standards and developments.

Hydr. Data Komet 3-3 T Komet 3-4 T Komet 3-5 T Komet 3-6 T Komet 5-8 TFH DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB

L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar

0,50 m 1,4 0,6 0,06 2,5 0,6 0,06 3,8 0,7 0,07 4,8 0,6 0,06 9,5 0,7 0,070,75 m 1,7 0,9 0,09 3,0 0,9 0,09 5,3 0,9 0,09 6,2 0,8 0,09 11,5 0,9 0,101,00 m 2,0 1,2 0,12 3,5 1,2 0,12 6,3 1,3 0,13 7,2 1,2 0,12 12,6 1,2 0,121,25 m 2,3 1,5 0,15 4,0 1,5 0,15 7,2 1,5 0,15 8,7 1,5 0,15 14,9 1,6 0,161,50 m 2,5 1,8 0,18 4,4 1,8 0,18 8,0 1,8 0,18 9,9 1,8 0,18 17,0 1,8 0,181,75 m 2,7 2,1 0,21 4,7 2,1 0,21 8,7 2,2 0,22 11,1 2,1 0,21 18,8 2,1 0,212,00 m 2,9 2,4 0,24 5,1 2,5 0,25 9,3 2,5 0,25 12,1 2,5 0,25 20,5 2,4 0,242,50 m 13,9 3,2 0,32 23,4 3,2 0,323,00 m 15,6 4,0 0,40 26,1 3,9 0,393,50 m 28,5 4,7 0,474,00 m 30,7 5,4 0,54MA tombak tombak tombak tombak tombakGW 0,06 kg 0,06 kg 0,06 kg 0,06 kg 0,13 kgArt.-No. 690-550 690-551 690-552 690-553 691-553Id.-No. 50957 50958 50959 50960 50964

Hydr. Data Komet 5-10 T Komet 10-12 T Komet 10-14 T Komet 15-17 T Komet 15-20 TFH DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB

L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar

0,50 m 15,5 0,8 0,08 21,5 0,6 0,06 30,1 0,6 0,06 42,2 0,6 0,06 58,9 0,6 0,060,75 m 19,0 1,1 0,11 25,9 0,8 0,08 37,6 0,9 0,09 52,0 0,9 0,09 73,9 0,8 0,081,00 m 21,9 1,4 0,14 31,2 1,1 0,11 44,5 1,2 0,12 62,2 1,1 0,11 87,3 1,1 0,111,25 m 25,3 1,8 0,18 35,8 1,4 0,14 50,5 1,5 0,15 69,2 1,4 0,14 98,9 1,4 0,141,50 m 28,3 2,0 0,20 39,8 1,7 0,17 55,9 1,8 0,18 76,4 1,7 0,17 109,3 1,7 0,171,75 m 31,0 2,5 0,25 43,5 2,1 0,21 60,8 2,1 0,21 82,9 1,9 0,19 118,8 1,9 0,192,00 m 33,4 2,8 0,28 46,9 2,3 0,23 65,3 2,4 0,24 89,0 2,2 0,22 127,6 2,2 0,222,50 m 37,9 3,6 0,36 53,1 2,9 0,29 73,6 3,0 0,30 100,1 2,8 0,28 143,6 2,8 0,283,00 m 41,9 4,4 0,44 58,6 3,5 0,35 81,0 3,7 0,37 110,0 3,4 0,34 158,0 3,4 0,343,50 m 45,6 5,2 0,52 63,6 4,2 0,42 87,8 4,3 0,43 119,2 4,0 0,40 171,2 3,9 0,394,00 m 49,0 6,0 0,60 68,3 4,8 0,48 94,2 5,0 0,50 127,7 4,6 0,46 183,5 4,5 0,455,00 m 55,2 7,6 0,76 76,9 6,1 0,61 105,7 6,2 0,62 135,7 5,2 0,52 206,0 5,7 0,576,00 m 60,8 9,2 0,92 84,6 7,4 0,74 116,1 7,5 0,75 143,2 5,8 0,58 226,2 6,9 0,697,00 m 91,6 8,7 0,87 125,7 8,8 0,88 157,3 7,0 0,70 244,9 8,1 0,818,00 m 98,2 10,0 1,00 134,7 10,1 1,01 170,2 8,2 0,82 262,3 9,2 0,929,00 m 143,1 11,4 1,14 182,3 9,4 0,94 278,6 10,4 1,0410,00 m 151,0 12,8 1,28 193,6 10,6 1,06 294,1 11,6 1,1611,00 m 204,4 11,8 1,18 308,9 12,8 1,2812,00 m 214,6 13,0 1,30 323,0 14,0 1,4013,00 m 336,6 15,2 1,5214,00 m 349,6 16,4 1,64MA tombak tombak tombak tombak tombakGW 0,13 kg 0,45 kg 0,45 kg 0,86 kg 0,86 kgArt.-No. 691-554 692-553 692-554 693-550 693-551Id.-No. 50965 50968 50969 50970 50971

FH =Fountain height (m),DWB =Nozzle Water demand (L/min), DDB =Nozzle Pressure demand (meter head, bar),MA =Material, GW =Weight (kg)

38

SINGLE JET NOZZLES

Hollow Jet Nozzles HS 70/3,5 T, HS 100/4,5 E, HS 130/10 E

• For greater fountain heights

• Clear, wind stable, andfull stream jet


• With flow adjuster

The OASE hollow jet nozzles arespecial nozzles that are used toachieve greater fountain heights.

Compared to full stream nozzles,the water requirement, or streamvolume, is reduced. The preciseconstruction of the ring slit gua-rantees a stable fountain jet.


Hydr. Data Hollow Jet Nozzle Hollow Jet Nozzle Hollow Jet Nozzle HS 70/3,5 T HS 100/4,5 E HS 130/10 E

DWB DDB DDB DWB DDB DDB DWB DDB DDBFH L/min mWS bar L/min mWS bar L/min mWS bar5,00 m 514 6,3 0,66,00 m 566 7,6 0,87,00 m 613 9,0 0,98,00 m 657 10,3 1,09,00 m 699 11,6 1,210,00 m 738 13,0 1,3 1120 12,0 1,212,00 m 811 15,7 1,6 1200 14,0 1,414,00 m 878 18,4 1,8 1400 20,0 2,016,00 m 941 21,1 2,1 1460 21,0 2,118,00 m 1001 23,9 2,4 1550 22,0 2,220,00 m 1057 26,6 2,7 1670 27,0 2,722,00 m 1111 29,4 2,9 1700 28,0 2,824,00 m 1162 32,2 3,2 1730 28,0 2,826,00 m 1800 29,0 2,928,00 m 1900 33,0 3,330,00 m 2080 40,0 4,035,00 m 2170 44,0 4,440,00 m 2740 69,0 6,9 6828 53,8 5,445,00 m 2900 80,0 8,0 7290 61,3 6,150,00 m 7735 69,0 6,955,00 m 8165 76,9 7,760,00 m 8583 85,0 8,565,00 m 8990 93,2 9,370,00 m 9388 101,6 10,275,00 m 9778 110,3 11,080,00 m 10160 119,0 11,9MA tombak/brass stainless steel stainless steelGW 5,0 kg 33,0 kg 76,0 kgArt.-No. 696-500 696-551 696-552Id.-No. 50972 50973 55350

Hollow Jet Nozzle External dia. of hollow jet Water film thicknessHS 70/3,5 T 70 mm 3,5 mm

HS 100/4,5 E 100 mm 4,5 mm HS 130/10 E 130 mm 10 mm

FH = Fountain height (m), DWB = Nozzle Water demand (L/min), DDB = Nozzle Pressure demand (meter head, bar), MA = Material, GW = Weight (kg)

Hollow Jet Nozzle HS 100/4,5 E

40

MULT I - JET NOZZLES

Vulkan 37-2,5 to 300/19-8 T

• Multi-step water pattern

• Precise, full stream

• Independent fromwater level

• Easy to clean

The OASE Vulkan multi jet nozz-les create a beam of jets that cas-cade at different levels. Thesingle jets are clear and relative-ly wind stable.

The fountain height of the Vulkan19-3 T and 43-3 T jets, by meansof a built-in throttle, can be smoo-thly adjusted without steps.

For types 37-2,5 K, 200/19-6 Tand 300/19-8 T the correct foun-tain height setting must be adju-sted by installing an externalregulation valve. The Vulkan200/19-6 T and 300/19-8 T areequipped with nozzles from theKomet range which allows forindividual jet adjustment.

For cleaning, the upper lids canbe removed.


Hydr. Data Vulkan 37-2,5 K Vulkan 19-3 T Vulkan 43-3 TDSD DWB DDB DDB DSD DWB DDB DDB DSD DWB DDB DDB

FH m L/min mWS bar m L/min mWS bar m L/min mWS bar

0,50 m 0,55 25,20 0,60 0,06 0,50 22,90 0,70 0,07 0,40 41,60 1,00 0,100,75 m 0,70 31,82 0,90 0,09 0,65 28,83 1,00 0,10 0,50 50,15 1,50 0,151,00 m 0,90 37,52 1,18 0,118 0,90 34,79 1,40 0,14 0,65 60,22 2,00 0,201,50 m 1,25 46,90 1,70 0,17 1,20 44,38 2,10 0,21 0,80 76,49 3,00 0,302,00 m 1,55 54,70 2,30 0,23 1,60 52,25 3,00 0,30 1,10 89,88 4,00 0,402,50 m 1,90 61,54 2,90 0,29 2,00 59,09 3,90 0,39 1,30 101,54 5,00 0,503,00 m 2,30 67,69 3,50 0,35 2,40 65,22 4,80 0,48 1,50 112,00 6,00 0,603,50 m 2,80 70,84 5,70 0,57 1,70 121,58 7,60 0,764,00 m 3,20 76,04 6,50 0,65 2,00 130,48 8,75 0,88MA Plastics tombak tombakGW 0,13 kg 1,5 kg 1,5 kgArt.-No. 680-560 681-551 684-551Id.-No. 52319 50948 50950

Hydr. Data Vulkan 200/19-6 T Vulkan 300/19-8 TDSD DWB DDB DDB DSD DWB DDB DDB

FH m L/min mWS bar m L/min mWS bar

2,00 m Variab. 197,15 2,90 0,292,50 m Variab. 222,06 3,60 0,363,00 m Variab. 244,48 4,40 0,44 Variab. 339,51 3,80 0,383,50 m Variab. 265,04 5,20 0,52 Variab. 367,70 4,40 0,444,00 m Variab. 284,15 6,00 0,60 Variab. 393,92 5,00 0,505,00 m Variab. 319,01 7,50 0,75 Variab. 441,82 6,40 0,646,00 m Variab. 350,52 9,00 0,90 Variab. 485,13 7,70 0,777,00 m Variab. 379,49 10,60 1,06 Variab. 524,99 9,00 0,908,00 m Variab. 406,49 12,20 1,22 Variab. 562,14 10,30 1,039,00 m Variab. 431,87 13,80 1,38 Variab. 597,08 11,60 1,1610,00 m Variab. 455,91 15,30 1,53 Variab. 630,17 12,90 1,2911,00 m Variab. 661,71 14,20 1,4212,00 m Variab. 691,89 15,60 1,5613,00 m Variab. 720,90 16,90 1,6914,00 m Variab. 748,86 18,20 1,8215,00 m Variab. 775,89 19,60 1,96MA tombak tombakGW 4,2 kg 18,5 kgArt.-No. 722-555 722-560Id.-No. 50999 51000

FH = Fountain height (m),DSD = Nozzle spray dia.,DWB = Nozzle Water demand, DDB = Nozzle Pressure demand, MA = Material, GW = Weight

MULTI -JET NOZZLES

Finger Jets 13-4 T and 25-4 T



• Attractive water pattern

• Easy to clean

The OASE multi jet finger nozzlescreate a water fan with a spreadof 60°. Depending on the type ofdesign, the nozzle holes arearranged in single or doublerows.

For cleaning of nozzles the largelid on the upper side of the nozz-le's body can be removed. Toachieve the right parabola sizean external regulating valve hasto be installed.

42

43

Hydr. Finger Jet Nozzle 13-4 T Finger Jet Nozzle 25-4 TDataPW PH SPB DWB DDB DDB PH SPB DWB DDB DDBm m m m L/min mWS bar m m L/min mWS bar

1,00 m 0,12 1,50 29,80 0,60 0,06 0,21 2,10 59,80 0,70 0,071,25 m 0,17 1,80 32,90 0,80 0,08 0,25 2,40 64,80 1,00 0,101,50 m 0,21 2,20 35,90 1,00 0,10 0,30 2,70 69,90 1,30 0,131,75 m 0,26 2,50 38,80 1,20 0,12 0,35 2,90 75,00 1,50 0,152,00 m 0,30 2,80 41,80 1,50 0,15 0,40 3,20 80,00 1,80 0,182,25 m 0,35 3,10 44,70 1,70 0,17 0,44 3,50 85,00 2,00 0,202,50 m 0,39 3,40 47,70 1,90 0,19 0,49 3,80 90,00 2,30 0,233,00 m 0,49 4,00 53,90 2,30 0,23 0,58 4,40 100,20 2,80 0,283,50 m 0,58 4,70 59,90 2,80 0,28 0,68 5,00 110,30 3,40 0,344,00 m 0,67 5,40 65,80 3,30 0,33 0,77 5,60 120,30 3,90 0,394,50 m 0,76 6,00 71,90 3,70 0,37 0,86 6,10 130,40 4,40 0,445,00 m 0,85 6,70 78,90 4,10 0,41 0,96 6,70 140,50 4,90 0,49MA tombak/brass tombak/brassGW 2,4 kg 2,5 kgArt.-No. 697-500 697-501Id.-No. 50974 50975

PW = Parabolic length, PH = Parabolic height, SPB = Spray width, DWB = Nozzle Water demand (L/min), DDB = Nozzle Pressure demand (meter head, bar), MA = Material, GW = Weight (kg)

We reserve the right to make technical changes according to the latest technological standards and developments.

44

MULT I - JET NOZZLES

• Decorative water patterns

• Precise and full stream


• Special versions on request

The jets of the OASE fountainrings and double rings as a stan-dard are manufactured that theyare adjusted to come up in a ver-tical position. The individualnozzles are soldered to the foun-tain ring.

In order to create individuallyshaped water patterns, the nozz-le pipes can be inclined inwardsand outwards with appropriatetools.

The fountain rings are suppliedas a standard with multi peri-pheral inlets and as specialdesign available with a centreinlet. By selecting different foun-tain ring sizes the rings can bearranged concentrically asdouble or multiple rings.

Fountain Rings 500/18/4 to 2000/72/4


Hydr. Fountain ring Fountain ring Fountain ring Fountain ring Fountain ringData 500/18/4 750/24/4 1000/36/4 1500/54/4 2000/72/4FH DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB

L/min L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar

0,75 m 55,6 1,0 0,10 74,1 1,0 0,10 111,2 1,0 0,10 166,8 1,0 0,10 222,4 1,0 0,101,00 m 64,9 1,3 0,13 86,6 1,3 0,13 129,9 1,3 0,13 194,8 1,3 0,13 259,7 1,3 0,131,25 m 73,4 1,7 0,17 97,9 1,7 0,17 146,8 1,7 0,17 220,2 1,7 0,17 293,7 1,7 0,171,50 m 81,3 2,1 0,21 108,4 2,1 0,21 162,6 2,1 0,21 243,9 2,1 0,21 325,2 2,1 0,211,75 m 88,8 2,5 0,25 118,4 2,5 0,25 177,5 2,5 0,25 266,3 2,5 0,25 355,1 2,5 0,252,00 m 95,9 2,9 0,29 127,9 2,9 0,29 191,8 2,9 0,29 287,7 2,9 0,29 383,6 2,9 0,292,50 m 109,4 3,8 0,38 145,9 3,8 0,38 218,9 3,8 0,38 328,3 3,8 0,38 437,8 3,8 0,383,00 m 122,3 4,7 0,47 163,0 4,7 0,47 244,5 4,7 0,47 366,8 4,7 0,47 489,0 4,7 0,473,50 m 134,3 5,7 0,57 179,4 5,7 0,57 269,1 5,7 0,57 403,7 5,7 0,57 538,3 5,7 0,574,00 m 146,5 6,7 0,67 195,3 6,7 0,67 293,0 6,7 0,67 439,5 6,7 0,67 586,0 6,7 0,67

Techn. Datad1 500 mm 750 mm 1000 mm 1500 mm 2000 mmd2 528 mm 785 mm 1042 mm 1554 mm 2064 mmd5 28 mm 35 mm 42 mm 54 mm 64 mmG 1“ (1“) 1“ (1 1/4“) 1 1/4“ (1 1/2“) 1 1/2“ (2“) 2“ (2 1/2“)l 124 mm 124 mm 124 mm 124 mm 124 mm

x1 87 mm 98 mm 87 mm 87 mm 87 mmz1 18 pcs. 24 pcs. 36 pcs. 54 pcs. 72 pcs.MA Copper/tombak Copper/tombak Copper/tombak Copper/tombak Copper/tombakGW 3,00 kg 5,00 kg 9,00 kg 17,00 kg 31,00 kg

Art.-No. 723-502 723-504 723-506 723-508 723-510 Id.-No. 51002 51004 51006 51008 51010

Fountain ring w/o central inlet = standard version - others= special versions on request

FH = Fountain height (m), DWB = Nozzle Water demand, DDB = Nozzle Pressure demand, MA = Material, GW = Weight

ROTATING NOZZLES



• Rotating spiral shaped water displays

• Ball-bearing mechanism

The OASE multi jet nozzlesPirouette and Rotation nozzleproduce effective, rotating waterdisplays. The seven- jet nozzle iskept in continuous rotation by therecoil of the slanted nozzlepipes. Six transparent and windstable jets of the Pirouette revolvearound a central jet. Using theRotation Jet nozzle, a variety ofdifferent dancing water patternscan be created by means of the 5 Komet nozzles.

The fountain height of the jets canbe adjusted, by means of anexternal regulation valve. Theball-bearing, rotating mechanismguarantees trouble-free operationeven when in continuous use.

46

Pirouette M7-10 T and Rotating Nozzle 5-10 E


Hydr. Pirouette M 7-10 T Rotating nozzle RO 5-10 EData DSD DWB DDB DDB DSD DWB DDB DDBFH m L/min mWS bar m L/min mWS bar

0,50 m variable 90,0 0,9 0,090,75 m 0,90 43,50 1,30 0,13 variable 110,0 1,2 0,121,00 m 1,05 49,90 1,70 0,17 variable 125,0 1,5 0,151,25 m 1,20 55,60 2,00 0,20 variable 145,0 1,9 0,191,50 m 1,35 60,80 2,40 0,24 variable 160,0 2,1 0,211,75 m 1,50 65,60 2,70 0,27 variable 175,0 2,8 0,282,00 m 1,65 70,00 3,10 0,31 variable 190,0 3,0 0,302,50 m 1,95 78,20 3,90 0,39 variable 220,0 3,8 0,383,00 m 2,25 85,60 4,70 0,47 variable 240,0 4,7 0,473,50 m 2,55 92,40 5,40 0,54 variable 260,0 5,8 0,584,00 m 2,85 98,70 6,20 0,62 variable 280,0 7,0 0,704,50 m 3,15 104,70 7,00 0,70 variable 300,0 7,6 0,765,00 m 3,50 110,30 7,70 0,77 variable 320,0 8,3 0,83MA tombak/brass tombak/brassGW 2,1 kg 4,0 kgArt.-No. 676-525 999-990Id.-No. 50921 58910

FH =Fountain height (m), DSD =Nozzle spray dia., DWB =Nozzle Water demandDDB =Nozzle Pressure demand, MA =Material, GW =Weight

Rotating nozzle RO 5-10 E

48

WATER F ILM NOZZLES

Lava Water Bells 25-5 E to 100-15 E

All Lava nozzles up to Lava 60-10 E have a built-in adjustmentfor varying the diameter of thebell. Water bells have the lowestnoise level of all fountain types.

They are ideally suited for waterbasins in winter gardens, recep-tion areas and for sheltered out-door pools.

• Transparent water pattern

• Adjustable bell diameter


• Low-noise level

OASE Lava water bell nozzlesproduce an attractive and perfec-tly formed water veil.

Adding Underwater illuminationgives the chance to emphasizeon appealing light.


Hydr. Lava 25-5 E Lava 30-10 E Lava 45-10 E Lava 60-10 E Lava 100-15 EData DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB

FD L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar200 mm 17,0 0,9 0,09300 mm 21,0 1,1 0,11 35,0 1,1 0,11400 mm 25,0 1,4 0,14 43,0 1,3 0,13 43,0 1,4 0,14500 mm 29,0 1,7 0,17 51,0 1,6 0,16 51,0 1,7 0,17 51,0 1,8 0,18600 mm 33,0 2,1 0,21 59,0 2,0 0,20 59,0 2,1 0,21 59,0 2,2 0,22700 mm 67,0 2,5 0,25 67,0 2,6 0,26 67,0 2,7 0,27900 mm 75,0 3,2 0,32 75,0 3,3 0,331100 mm 83,0 4,0 0,40 86,0 2,1 0,211300 mm 108,0 2,4 0,241500 mm 130,0 2,8 0,28

MA stainless steel/tombak stainless steel/tombak stainless steel/tombak stainless steel/tombak stainless steel/tombakGW 0,6 kg 1,3 kg 1,6 kg 1,8 kg 5,7 kg

Art.-No. 660-550 661-550 662-550 663-550 664-550Id.-No. 50884 50889 50890 50891 50892

FD = Fountain dia., DWB = Nozzle Waterdemand, DDB = Nozzle Pressure demand, MA = Material, GW = Weight

50

WATER F ILM NOZZLES

Gushing Nozzle 115-15 T

• Clear-cut water pattern

• Very wind stable


The OASE gushing nozzle crea-tes a particularly compact, fanshaped water stream with athickness of 6mm and a projec-tion angle of 30° approx. Thistype of nozzle is especiallyattractive when arranged in agroup around a central nozzle.But even on its own this jet willalways find its place in anyarrangement.

Hydr. Gushing nozzle 115-15TDataPW PH SPB DWB DDB DDBm m m L/min mWS bar

0,50 m 0,10 0,25 94,20 0,38 0,040,75 m 0,15 0,33 112,90 0,57 0,061,00 m 0,20 0,42 131,80 0,76 0,081,25 m 0,26 0,50 150,00 0,95 0,101,50 m 0,33 0,58 168,60 1,15 0,121,75 m 0,40 0,67 187,30 1,35 0,142,00 m 0,48 0,75 205,90 1,52 0,152,50 m 0,62 0,92 243,20 1,91 0,193,00 m 0,77 1,08 280,40 2,29 0,233,50 m 0,92 1,25 317,50 2,68 0,274,00 m 1,06 1,42 354,80 3,06 0,314,50 m 1,21 1,58 392,10 3,44 0,34

MA tombakGW 2,5 kg

Art.-No. 697-551Id.-No. 50976

PW = Parabolic length, PH = Parabolic height, SPB = Spray width, DWB = Nozzle Water demand,DDB = Nozzle Pressure demand, MA = Material, GW = Weight


• Transparent water pattern


• Variable calyx shape

• With adjustable flange

The OASE calyx nozzles producea water pattern similar to theLava water bell, but the water veilrises and creates a calyx shape.The water streams stronger andindividual changes of water pat-tern, diameter and height arepossible without the necessity tochange the flow volume. This isdone by changing the level of theadjustable outer nozzle jacket.The nozzle is independent fromwater level and is equipped with an adjustable flange for anaccurate vertical adjustment.

Calyx Nozzle 70 T

Hydr. Calyx nozzle 70 TData

KH KD DWB DDB DDBm m L/min mWS bar

0,25 m 0,55 43,00 1,20 0,120,50 m 0,80 105,00 2,00 0,200,75 m 1,50 114,00 2,10 0,211,00 m 2,00 120,00 2,20 0,221,25 m 2,30 135,00 3,00 0,301,50 m 2,50 150,00 3,60 0,361,75 m 3,00 175,00 4,00 0,40

MA tombak/brassGW 6,0 kg

Art.-No. 665-600Id.-No. 53417

KH = Calyx height, KD = Calyx diameter, DWB = Nozzle Water demand, DDB = Nozzle Pressure demand, MA = Material, GW = Weight

52

WATER F ILM NOZZLES

Fan Jet Nozzles 10-6 E to 20-6 E

• Fan- shaped water stream with a thickness of 6 to 8 mm

• Independent fromwater level

• Stainless steel optics

The OASE fan jet nozzles areideal for creating vertical or incli-ned rising water veils. The wideprojection of the water film canbe used, for instance, to hidepipe work or pumps otherwisevisible on pool floors.

The nozzles run independentlyfrom water level. For setting theadjustment for the water pattern itis necessary to install an externalregulation valve.


Hydr. Fan Jet Nozzle 10-6 E Fan Jet Nozzle 15-8 E Fan Jet Nozzle 20-6 EData

FH SPB DWB DDB DDB SPB DWB DDB DDB SPB DWB DDB DDBm m L/min mWS bar m L/min mWS bar m L/min mWS bar

0,25 m 0,60 70,00 0,40 0,040,50 m 1,00 94,57 0,63 0,06 1,40 143,39 0,60 0,06 1,00 181,87 0,57 0,060,75 m 1,50 116,43 0,95 0,10 1,80 174,29 0,87 0,09 1,40 222,53 0,84 0,081,00 m 2,00 134,81 1,28 0,13 2,80 200,50 1,15 0,11 1,80 256,86 1,11 0,111,25 m 2,80 150,98 1,60 0,16 3,40 223,68 1,44 0,14 2,20 287,13 1,39 0,141,50 m 3,00 165,58 1,93 0,19 4,00 244,68 1,72 0,17 2,80 314,52 1,67 0,171,75 m 3,80 179,01 2,26 0,23 5,00 264,04 2,00 0,20 3,40 339,73 1,95 0,202,00 m 5,50 282,08 2,29 0,23 3,60 363,21 2,23 0,222,50 m 4,80 406,17 2,79 0,28

MA stainless steel stainless steel stainless steelGW 0,25 kg 0,49 kg 0,76 kg

Art.-No. 697-560 697-561 697-562Id.-No. 53056 53047 53057

FH = Fountain height, SPB = Spray width,DWB = Nozzle Water demand, DDB = Nozzle Pressure demand,

MA = Material, GW = Weight

FOAM EFFECT NOZZLES water level independent

• Lively, high contrast water pattern

• Highly compact white foam jet

• Rich oxygenation

• Highly wind stable

The OASE foam spray and foamspring nozzles, unlike Cascade andGeiser, function independently fromwater level. Changes in water levelwill have no effect on the water pat-tern.

For inlets of water cascades, formulti-stepped pools or fountaininstallations with water reservoir atlower level, this nozzle type has awide field of applications, sincenon-return valves, which are oftentroublesome, are not required here.

Due to the high quantity of air thatis mixed in, a voluminous watereffect is achieved using a relativelysmall quantity of water. This makesthe foam jet very soft, highly com-pact and exceptionally foamy. Itstands out, highly visible against itssurroundings.

54

Schaumsprudler 35-10 E to 55-15 E andSchaumquell 50-10 T to 75-20 T


Hydr. Schaumsprudler 35-10 E Schaumsprudler 55-10 E Schaumsprudler 55-15 E Schaumquell 50-10 T Schaumquell 75-20 T

Data DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDBFH L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar

0,25 m 47,10 1,00 0,10 60,14 1,05 0,110,50 m 55,10 1,38 0,14 84,57 2,05 0,21 125,00 1,07 0,11 126,88 2,28 0,230,75 m 71,18 2,15 0,22 108,28 3,18 0,32 151,69 1,50 0,15 145,66 3,00 0,301,00 m 80,73 2,76 0,28 122,02 4,04 0,40 176,45 1,90 0,19 162,30 3,73 0,37 328,79 1,95 0,201,25 m 89,27 3,38 0,34 134,37 4,90 0,49 198,16 2,35 0,24 177,39 4,46 0,45 367,12 2,43 0,241,50 m 97,07 3,99 0,40 145,69 5,76 0,58 217,74 2,84 0,28 191,31 5,18 0,52 401,84 2,91 0,291,75 m 104,29 4,61 0,46 156,19 6,62 0,66 235,70 3,32 0,33 204,29 5,91 0,59 433,81 3,40 0,342,00 m 111,05 5,23 0,52 166,04 7,48 0,75 252,40 3,81 0,38 216,50 6,64 0,66 463,60 3,88 0,392,50 m 123,47 6,46 0,65 184,19 9,20 0,92 282,90 4,79 0,48 239,08 8,09 0,81 518,12 4,85 0,493,00 m 200,72 10,93 1,09 310,45 5,76 0,58 259,74 9,55 0,96 567,50 5,81 0,583,50 m 216,02 12,65 1,27 335,78 6,74 0,67 278,90 11,02 1,10 612,98 6,78 0,684,00 m 359,37 7,72 0,77 296,85 12,48 1,25 655,38 7,75 0,784,50 m 381,53 8,71 0,87 313,79 13,94 1,39 695,24 8,72 0,875,00 m 402,51 9,69 0,97 329,90 15,41 1,54 733,00 9,70 0,976,00 m 441,56 11,56 1,16 803,36 11,65 1,177,00 m 477,53 13,64 1,36 868,22 13,31 1,338,00 m 928,73 15,57 1,569,00 m 965,69 17,54 1,75

10,00 m 1039,69 19,51 1,95MA stainless steel/Plastics stainless steel stainless steel tombak tombakGW 0,5 kg 1,2 kg 1,4 kg 2,2 kg 4,3 kg

Art.-No. 706-500 706-505 706-510 700-550 701-551Id.-No. 50984 50986 50987 50979 50980

FH = Fountain height, DWB = Nozzle Water demand,DDB = Nozzle Pressure demand, MA = Material, GW = Weight

56

FOAM EFFECT NOZZLES water level dependent

Cascade 50 T to Cascade 130 T

special effect. Non-return valvesmust be provided in installationswith different water levels, sinceotherwise when switching off, thewater level will fall to the injectionheight.

• Lively display, white foaming

• Conical shapedwater display


The OASE Cascade foam effectnozzles are injector nozzles thatare depending on water level,which is unlike to foam spray andfoam spring nozzles of seriesSchaumsprudler. Because of theinjection effect, the surroundingwater and air are sucked in, inten-sively mixed and thrown high intothe air by the injector jet. This hasan economical effect, since with arelatively low pumping power avoluminous, tapered fountain jetcan be achieved. However thewater pattern can change due tovarying water levels. When belowthe standard water level, the jet isthinner but also higher, whenabove, it is fuller but also lower. In certain basin arrangements a surging effect may appear.When the waves become strongerthe fountains begin to dance,often seen as a very interesting


Hydr. Cascade 50 T Cascade 70 T Cascade 90 T Cascade 110 T Cascade 130 TData DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDBFH L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar

0,25 m 28,7 1,8 0,180,50 m 34,5 2,6 0,26 79,7 2,7 0,270,75 m 39,5 3,3 0,33 88,8 3,3 0,33 141,4 2,7 0,271,00 m 43,9 4,1 0,41 97,0 4,0 0,40 157,1 3,3 0,33 236,2 2,9 0,36 379,6 3,6 0,361,50 m 51,5 5,7 0,57 111,7 5,3 0,53 184,4 4,6 0,46 279,8 4,1 0,48 437,3 4,8 0,482,00 m 58,2 7,3 0,73 124,7 6,6 0,66 208,2 5,8 0,58 317,4 5,2 0,60 488,3 6,0 0,602,50 m 69,7 10,4 1,04 136,4 7,9 0,79 229,6 7,1 0,71 351,2 6,4 0,72 534,6 7,2 0,723,00 m 74,8 12,0 1,20 147,3 9,2 0,92 249,2 8,3 0,83 382,0 7,6 0,84 577,2 8,4 0,844,00 m 79,6 13,6 1,36 166,9 11,8 1,18 284,4 10,8 1,08 437,2 9,9 1,07 654,2 10,8 1,075,00 m 88,4 16,8 1,68 184,5 14,4 1,44 315,8 13,4 1,34 486,4 12,3 1,34 723,4 13,4 1,346,00 m 200,6 17,1 1,71 344,4 15,9 1,59 531,1 14,7 1,55 786,6 15,5 1,557,00 m 215,5 19,7 1,97 370,9 18,5 1,85 572,5 17,1 1,79 845,3 17,9 1,798,00 m 395,7 21,0 2,10 611,2 19,4 2,04 900,3 20,4 2,0410,00 m 441,4 26,1 2,61 682,3 24,2 2,52 1001,7 25,2 2,5212,00 m 747,1 29,1 3,01 1094,3 30,1 3,0114,00 m 806,9 33,9 3,50 1180,2 35,0 3,5016,00 m 1260,6 39,9 3,9918,00 m 1336,6 44,9 4,4920,00 m 1408,9 49,9 4,99

MA tombak tombak tombak tombak tombakGW 1,0 kg 2,4 kg 3,6 kg 7,0 kg 11,0 kg

Art.-No. 670-550 670-551 671-550 671-551 671-552Id.-No. 50911 50912 50915 50916 50917


FOAM EFFECT NOZZLES water level dependent

Geiser 20 T to Geiser 100 T

• Narrow, white foaming water columns

• Cylindrical shape


The OASE Geiser foam effectnozzles are injector nozzles thatare depending on water level,which is unlike to foam spray andfoam spring nozzles of seriesSchaumsprudler. Because of theinjection effect, the surroundingwater and air are sucked in,intensively mixed and thrownhigh into the air by the injectorjet. This has an economicaleffect, since with a relatively lowpumping power a voluminousfountain jet can be achieved, but,compared with the effect andshape produced by the Cascadenozzles, the shape of the jet ismore cylindrical. However thewater pattern can change due tovarying water levels. Whenbelow the standard water level,the jet is thinner but also higher,when above, it is fuller but alsolower. In certain basin arrange-ments a surging effect may appe-ar. When the waves becomestronger the fountains begin todance, often seen as a very inte-resting special effect. Non-returnvalves must be provided in instal-lations with different water levels,since otherwise when switchingoff, the water level will fall to theinjection height.

58

Hydr. Geiser 20 T Geiser 40 T Geiser 60 T Geiser 80 T Geiser 100 TData DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB DWB DDB DDB

FH L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar L/min mWS bar

0,50 m 30,4 2,0 0,20 82,7 2,7 0,27 128,4 2,4 0,240,75 m 33,9 2,5 0,25 89,1 3,1 0,31 140,3 2,9 0,291,00 m 37,1 3,0 0,30 95,0 3,5 0,35 151,3 3,4 0,34 242,0 3,7 0,371,50 m 42,9 3,9 0,39 105,9 4,3 0,43 171,2 4,3 0,43 273,2 4,7 0,472,00 m 47,9 4,9 0,49 115,8 5,2 0,52 189,0 5,3 0,53 301,3 5,7 0,57 459,4 5,6 0,562,50 m 52,5 5,9 0,59 124,9 6,1 0,60 205,3 6,2 0,62 327,0 6,7 0,67 497,0 6,5 0,663,00 m 56,7 6,9 0,69 133,4 6,9 0,69 220,4 7,2 0,72 350,8 7,7 0,77 532,0 7,5 0,754,00 m 64,3 8,9 0,89 149,0 8,6 0,86 247,9 9,1 0,91 394,3 9,7 0,97 596,0 9,4 0,945,00 m 71,1 10,8 1,08 163,1 10,3 1,03 272,8 10,9 1,09 433,5 11,8 1,18 653,9 11,3 1,136,00 m 77,3 12,8 1,28 176,2 12,0 1,20 295,6 12,9 1,29 469,6 13,8 1,38 707,3 13,3 1,337,00 m 188,4 13,8 1,38 316,9 15,7 1,57 503,2 15,9 1,59 757,0 15,2 1,528,00 m 199,8 15,5 1,55 336,8 16,7 1,67 534,8 17,9 1,79 803,8 17,1 1,7110,00 m 373,7 20,6 2,06 593,1 22,1 2,21 890,5 21,0 2,1012,00 m 407,5 24,4 2,44 646,5 26,2 2,62 969,8 24,9 2,4914,00 m 696,1 30,4 3,04 1043,6 28,9 2,8916,00 m 742,7 34,6 3,46 1112,8 32,8 3,2818,00 m 786,7 38,8 3,88 1178,3 36,8 3,6820,00 m 828,7 43,0 4,30 1240,8 40,8 4,0825,00 m 1386,0 50,9 5,0930,00 m 1519,1 61,1 6,12

MA tombak tombak tombak tombak tombakGW 1,5 kg 3,2 kg 5,3 kg 9,3 kg 16,2 kg

Art.-No. 710-550 711-550 712-550 713-550 714-550Id.-No. 50991 50992 50993 50994 50995



SPHERE EFFECT NOZZLES

• Impressive water display

• Decorative, high-grade steel sculpture

• Highly wind stable


The OASE water spheres andwater hemispheres are veryattractive nozzle set ups, thenozzle elements are mainly madeof stainless steel, and even whennot in operation, they will be visi-ble as an impressive sculpture.There are many nozzle pipeswhich are arranged in a regularpattern. The number depends onthe size of sphere, producing afascinating display.

Despite of the relatively fine vei-les of water, the sphere andhemisphere can still be operatedin case of stronger winds.

60

Water Spheres 900/37 E to 6000/450 E Water Hemispheres H900/25 E to H6000/248 E

Hydr. Water sphere Water sphere Water hemisphere Water hemisphereData 900/37 E 1200/79 E 1500/127 E 2500/127 E 3500/380 E 6000/450 E H900/25 E H1200/49 E H1500/73 E H2500/73 E H3500/210 E H6000/248 E

zd Stck. 37 79 127 127 380 450 25 49 73 73 210 248DWB L/min. 370 790 1270 1270 4180 6750 250 490 730 730 2310 3720DDB m.W.S. 10 10 11 12 16 20 9 9 10 11 13 15DDB bar 1 1 1,1 1,2 1,6 2,0 0,9 0,9 1,0 1,1 1,3 1,5MBD mm 2000 2500 3000 4500 6000 10000 1500 2000 2500 3500 5000 9000DD mm 1x DN 65 1x DN 65 2x DN 65 2x DN 65 4x DN 65 6x DN 100 1x DN 65 1x DN 65 1x DN 65 1x DN 65 2x DN 80 3x DN 100d1 mm 900 1200 1500 2500 3500 6000 900 1200 1500 2500 3500 6000d2 mm 76 76 76 76 160 220 76 76 76 76 160 220d3 mm 475 475 475 475 1000 1500 475 475 475 475 1000 1000d4 mm 12 12 12 12 22 26 12 12 12 12 22 22h1 mm 100 100 100 100 100 125 100 100 100 100 100 125h2 mm 300 300 300 400 500 500 300 300 300 400 500 500h3 mm 1350 1600 1850 2350 4100 6600 500 500 500 600 600 650h4 mm 1800 2200 2600 3600 5850 9600 950 1100 1250 1850 2350 3650x1 mm 430 430 430 430 900 1400 430 430 430 430 900 900x2 mm 123 123 123 123 200 250 123 123 123 123 200 200

MA stainless steel/tombak stainless steel/tombak stainless steel/tombak stainless steel/tombakGW kg 32 56 100 160 1100 3100 25 42 65 100 650 1800

Art.-No. 666-550 666-551 666-552 666-554 666-575 666-580 666-555 666-556 666-557 666-559 666-585 666-590Id.-No. 50894 50895 50896 51759 51760 51761 50897 50898 50899 51762 51763 51764

zd = No.of nozzles, DWB = Nozzle Water demand, DDB = Nozzle Pressure demand, MBD = Minimum pool dia., DD = Dia.delivery port, d = Diameter, h = Height,

x = Distance, pitch, MA = Material, GW = Weight


62

WELL WATER EFFECTS

Well Outlets BRA 10 T to BRA 15 T

• Various applications

• Solid and robust construction

• Highly corrosion resistant

• Easy installation

OASE-well water outletswere designed for reproduction orrestoring of historical public wellsand fountains.

These were originally known tosupply the population with drin-king water and were fed by waterfrom a source or an “artesianwell”. Nowadays the water comesfrom the mains and is circulatedby an electrical centrifugal pump.The reproduction of these publicwells are an enrichment for thegeneral aspect of our towns andvillages.

An oasis of silence in the middle ofthe hustle and bustle of the every-day life and a pleasant and welco-med refreshment on hot summerdays for old and young.

The OASE water well outlets arecast from tombak, and due to their strong wall thickness highlyresistant to wear and tear. Due to their design with screw-in nipple and O-ring seal they canbe easily mounted.

Techn. Data BRA 10 T BRA 10-2 T BRA 15

Water dema. 32 l/min. 32 l/min. 60 l/min.Pressure dema. 0,5 mWS 0,5 mWS 0,5 mWS

Material tombak tombak tombakWeight 1,50 kg 1,60 kg 5,30 kgArt.-No. 699-505 699-506 699-510Id.-No. 52371 53065 52372


64

Pumps

• Submersible Pumps page 66

• Universal Pumps page 70

• Block Centrifugal Pumps page 74

• Water Display and Filtration Pumps page 78

66

SUBMERSIBLE PUMPS

Atlantis 200

These pumps have a robust wetrunning canned motor and runwithout shaft seal. The motor andpump shafts, as well as the bea-rings, are made from oxide cera-mics. This results in particularlysilent and frictionless continuousrunning. The materials used, suchas high-grade steel, tombak andglass fibre reinforced plastics,affirm the solid make of thesepumps.

The OASE Atlantis 200 fountainpump is a powerful pump, espe-cially designed as submersiblepump for underwater operation.The symmetrical, round and largevolume filter housings make thesepumps particularly stable. As anoption special fittings are availa-ble for the symmetrical installati-on of underwater spotlights.

• Symmetrical form

• Specially made for fountains

• Robust wet running canned motor

• All wear-free static seals

• Bearings and motor shaft made of special ceramic

• Motor housing and rotor can made of high-grade steel

• Large volume high grade plastic filter basket

67

Atlantis 200

Nominal voltage: 230 V/50HzPower consumption: 550 WNominal current: 2,60 AConnection - deliv. Port: G1, G11/2Filter surface: 1325 cm2

Connection cable: 10 mMaterial: V2A, Tb, ABSWeight: 17,0 kgArt.-No.: 508-002Id.-No.: 52004

Pumps adjustable using:

1. Mechanical flow regulator

2. Electronic speed regulator

3. FM-Profimaster

Atlantis 200


68

SUBMERSIBLE PUMPS

• Extremely low profile, slim construction

• Multi-stage, therefore suitable for greater fountain heights

• Large volume filter basket

• High level of stability


• All parts made of corrosion resistant high-grade steel

• Motor easily replaceable

SPA 22 - SPA 280

The SPA submersible pumps aredesigned for multistage construc-tion and are mainly used where-ver single stage pumps would beincapable of generating a suffi-cient fountain height.

The pumps are best suitable foruse with particularly high singlejets or multiple grouped jets.

69

Type Art.-No. ID.-No. Voltage Power Current b c DD d d1 d2 e e1 f h h1 k L m n n1 o w s Material Weight

SPA 22 - 23 914-103 53834 3x400 V/50 Hz 1,1 kW 3,04 A 189 4 Rp 2 1/2 225 131 95 80 57 229 122.5 237 500 680 92 40 44 69 554 11 V2A. 1.4301 20 kgSPA 22 - 33 914-113 53835 3x400 V/50 Hz 2,2 kW 6,05 A 189 4 Rp 2 1/2 225 131 95 80 57 229 122.5 237 500 888 300 40 44 277 554 11 V2A. 1.4301 28 kgSPA 22 - 43 914-123 53836 3x400 V/50 Hz 2,2 kW 6,05 A 189 4 Rp 2 1/2 225 131 95 80 57 229 122.5 237 500 948 360 40 44 337 554 11 V2A. 1.4301 29 kg

SPA 35 - 23 915-103 53839 3x400 V/50 Hz 2,2 kW 6,05 A 189 4 Rp 3 225 131 95 80 57 229 123 237 500 898 310 40 44 287 554 11 V2A. 1.4301 28 kgSPA 35 - 33 915-113 53840 3x400 V/50 Hz 3,0 kW 7,85 A 189 4 Rp 3 225 131 95 80 57 229 123 237 750 1035 197 40 44 174 804 11 V2A. 1.4301 31 kgSPA 35 - 43 915-123 53841 3x400 V/50 Hz 4,0 kW 9,60 A 189 4 Rp 3 225 131 95 80 57 229 123 237 750 1211 373 40 44 350 804 11 V2A. 1.4301 37 kg

SPA 58 - 23 916-103 53845 3x400 V/50 Hz 3,0 kW 7,90 A 189 4 Rp 3 225 141 95 100 77 229 123 237 750 970 112 40 44 89 804 11 V2A. 1.4301 31 kgSPA 58 - 33 916-113 53846 3x400 V/50 HzYD 5,5 kW 13,60 A 189 4 Rp 3 225 150 138 100 77 229 123 237 750 1150 292 40 44 269 804 11 V2A. 1.4301 54 kgSPA 58 - 43 916-123 53847 3x400 V/50 HzYD 7,5 kW 17,60 A 189 4 Rp 3 225 150 138 100 77 229 123 237 1000 1293 185 40 44 162 1054 11 V2A. 1.4301 60 kg

SPA 100 - 13 917-103 53852 3x400 V/50 HzYD 5,5 kW 13,60 A 274 4 Rp 5 310 186 138 120 97 314 165 322 750 1162 284 40 44 261 804 11 V2A. 1.4301 66 kgSPA 100 - 23 917-113 53853 3x400 V/50 HzYD 7,5 kW 17,60 A 274 4 Rp 5 310 186 138 120 97 314 165 322 750 1320 442 40 44 419 804 11 V2A. 1.4301 72 kgSPA 100 - 33 917-123 53854 3x400 V/50 HzYD 11,0 kW 24,80 A 274 4 Rp 5 310 186 138 120 97 314 165 322 1000 1508 380 40 44 357 1054 11 V2A. 1.4301 91 kg

SPA 162 -1-13 918-103 53858 3x400 V/50 HzYD 7,5 kW 17,60 A 274 4 Rp 6 310 218 138 120 92 314 165 322 750 1165 287 40 44 269 804 11 V2A. 1.4301 85 kgSPA 162 - 13 918-113 53859 3x400 V/50 HzYD 11,0 kW 24,80 A 274 4 Rp 6 310 218 138 120 92 314 165 322 750 1255 377 40 44 359 804 11 V2A. 1.4301 93 kgSPA 162 - 2-23 918-123 53860 3x400 V/50 HzYD 13,0 kW 34,00 A 274 4 Rp 6 310 218 138 120 92 314 165 322 1000 1441 313 40 44 295 1054 11 V2A. 1.4301 103 kg

SPA 280 - 1-13 919-103 53864 3x400 V/50 HzYD 15,0 kW 34,00 A 274 4 Rp 6 310 247 138 120 96 314 165 322 1000 1489 361 40 44 339 1054 11 V2A. 1.4301 104 kgSPA 280 - 13 919-113 53865 3x400 V/50 HzYD 18,5 kW 42,00 A 274 4 Rp 6 310 247 138 120 96 314 165 322 1250 1544 166 40 44 144 1304 11 V2A. 1.4301 111kgSPA 280 - 2-23 919-123 53866 3x400 V/50 HzYD 30,0 kW 66,50 A 274 4 Rp 6 310 247 138 120 96 314 165 322 1500 1910 282 40 44 260 1554 11 V2A. 1.4301 132 kg


UNIVERSAL PUMPS

USP 412 - USP 813

• Wet and dry installation possible


• All wear-free static seals

• Bearings of motor shaft made of special ceramic material

• Shaft, rotor can and pump rotor made of high grade steel

• Casing made from corrosion-resistant tombac

70

The OASE universal pumps canbe installed as wet running sub-mersible pumps as well as drypumps in a separate pump room. The robust wet running cannedmotor hasn't got any dynamical-

ly moving shaft seals, but onlystatic seals. As they are fully sea-led as a submersible pump, thereis also no problem with a suddenwater flood into the pump room.

71

Type Art.-No. ID.-No. voltage power current B B1 B2 DD DS D H H1 L L1 L2 L3 L4 material weight

USP 412 W 925 - 512 55721 1x230 V/50 Hz 0,52 kW 2,20 A 180 140 178 G 1 1/2 G 2 130 80 220 512 268 244 33 297 Tomb./stain. steel 22 kgUSP 413 D 925 - 503 55720 3x400 V/50 Hz 0,49 kW 0,95 A 180 140 178 G 1 1/2 G 2 130 80 220 512 268 244 33 297 Tomb./stain. steel 22 kgUSP 512 W 926 - 512 55727 1x230 V/50 Hz 0,60 kW 3,30 A 240 200 210 G 2 G 2 1/2 130 115 280 551 252 299 36 285 Tomb./stain. steel 31 kgUSP 513 D 926 - 503 55726 3x400 V/50 Hz 0,77 kW 1,30 A 240 200 210 G 2 G 2 1/2 150 115 280 551 252 299 36 285 Tomb./stain. steel 31 kg

USP 516 D 926 - 526 55728 3x230 V/60 Hz 1,35 kW 4,26 A 240 200 210 G 2 G 2 1/2 150 115 280 551 252 299 36 285 Tomb./stain. steel 31 kg

USP 662 W 927 - 512 55732 1x230 V/50 Hz 1,12 kW 4,70 A 240 200 230 G 2 1/2 G 3 170 115 310 679 305 374 36 330 Tomb./stain. steel 37 kgUSP 663 D 927 - 503 55731 3x400 V/50 Hz 1,18 kW 2,10 A 240 200 230 G 2 1/2 G 3 170 115 310 679 305 374 36 330 Tomb./stain. steel 37 kg

USP 666 D 927 - 516 55733 3x230 V/60 Hz 1,80 kW 5,90 A 240 200 230 G 2 1/2 G 3 170 115 310 679 305 374 36 330 Tomb./stain. steel 37 kg

USP 813 D 928 - 503 55735 3x400 V/50 Hz 1,50 kW 2,90 A 240 200 255 DN 80 G 3 200 115 290 696 308 388 36 347 Tomb./stain. steel 42 kg

USP 816 D 928 - 516 55736 3x230 V/60 Hz 2,10 kW 5,40 A 240 200 255 DN 80 G 3 200 115 290 696 308 388 36 347 Tomb./stain. steel 42 kg

USPH 422 W 925 - 532 56502 1x230 V/50 Hz 0,92 kW 4,10 A 180 140 178 G 2 G 2 1/2 150 115 280 551 252 299 36 285 Tomb./stain. steel 30 kgUSPH 423 D 925 - 523 56503 3x400 V/50 Hz 0,98 kW 1,70 A 180 140 178 G 2 G 2 1/2 150 115 280 551 252 299 36 285 Tomb./stain. steel 30 kgUSPH 522 W 926 - 532 56504 1x230 V/50 Hz 1,27 kW 5,60 A 240 200 210 G 2 G 2 1/2 150 115 280 596 297 299 36 330 Tomb./stain. steel 35 kgUSPH 523 D 926 - 543 56505 3x400 V/50 Hz 1,28 kW 2,30 A 240 200 210 G 2 G 2 1/2 150 115 280 596 297 299 36 330 Tomb./stain. steel 35 kgUSPH 673 D 927 - 523 56506 3x400 V/50 Hz 1,55 kW 3,10 A 240 200 230 G 2 1/2 G 3 170 115 310 679 305 374 36 330 Tomb./stain. steel 37 kg


72

UNIVERSAL PUMPS

USP Classic 70

pump shaft, as well as the bea-rings, are made from oxide cera-mics. This results in particularlysilent and frictionless continuousrunning.

The corrosion resistant high-grade steel, rotor can, the largebase and the big size filter basketround up the picture of these uni-versal fountain pumps.

Warranty: 3+2 years Application Guarantee

• Universal use, for dry and underwater application


• Only long-life static seals

• Bearings of the motor shaft made of special ceramics

• Shaft, rotor can and pump rotor made from high-grade steel

• Large volume high grade plastic filter basket

• Including hose tails

The OASE fountain pumpsClassic are powerful pumps,which are conceived for submer-sible operation as well as for dryinstallation.

For this purpose only the filterbasket has to be removed andthe suction hose has to beconnected to the now accessiblesuction port.

As an option an exchangeablepump housing with suction pipeconnection is available.

The pumps have a robust wet run-ning canned motor and run with-out a shaft seal. The motor and

73

Pumps adjustable using:

1. Mechanical flow regulator

2. Electronic speed regulator

3. FM-Profimaster


Type ID-No. Art.-No. voltage power current G1 S b b1 b2 l l 1 l 2 l 3 l 4 h h 1 d material weightClassic 70 56734 504-422 1 x 230 V 270 W 1.05 A 1” 11/2” 165 110 137 271 111 160 174 97 158 65 6,5 stain. steel./pla. 5 kg

cable length: 20 m

74

BLOCK CENTRIFUGAL PUMPS

BT 0,55-40 to 22,0-125

• Robust and compact construction

• Dimensions and connections to DIN standard

• Motor to IEC-standard

• Easily replaceable motor impeller unit

• Wear-free mechanical seal

• High efficiency closed impeller wheel

• Low speed, reduced wear and low noise

The OASE block centrifugal pumpsBT are characterized by their com-pact construction and low spacerequirement. Without extensive

preparations, time consumingadjustments or the danger of bra-cing of a coupling, the installationcan be arranged quickly.

As normally priming spiral casingcentrifugal pumps they consist ofonly few, but functionally influen-ced, important parts.

Maintenance works can thereforebe arranged fast and easily. The

basic version is made of grey castiron. Other versions such as bron-ze are available on request.

Type of construction “V1” Type of construction “B35”

Pump type ID-No. power [kW] current [A] Volt [V] (50 Hz) construction DN S DN D a b1 b2 b3 b4 d1BT-Pump 0,55 - 40 - 4 57038 0,55 1,5 400V V1 65 40 80 120 135 111BT-Pump 0,75 - 40 - 4 57039 0,75 1,9 400V V1 65 40 80 120 135 111BT-Pump 1,1 - 40 - 4 57040 1,10 2,6 400V V1 65 40 80 120 135 117BT-Pump 2,2- 40 - 4 57041 2,20 4,7 400V V1 65 40 100 145 151BT-Pump 3,0 - 40 - 4 57042 3,00 6,4 400V V1 65 40 100 174 178BT-Pump 1,1 - 50 - 4 57043 1,10 2,6 400V V1 65 50 100 127 147 117BT-Pump 1,5 - 50 - 4 57044 5,00 3,4 400V V1 65 50 100 127 147 117BT-Pump 3,0 - 50 - 4 57045 3,00 6,4 400V V1 65 50 100 153 172BT-Pump 4,0 - 50 - 4 57046 4,00 8,2 400V V1 65 50 100 174 186BT-Pump 5,5 - 50 - 4 57047 5,50 11,4 400V/ YD B35 65 50 100 174 186 53 12BT-Pump 1,1 - 65 - 4 57048 1,10 2,6 400V V1 80 65 100 136 162 117BT-Pump 1,5 - 65 - 4 57049 1,50 3,4 400V V1 80 65 100 136 162 117BT-Pump 2,2 - 80 - 4 57050 2,20 4,7 400V V1 100 80 125 160 196 138BT-Pump 3,0 - 80 - 4 57051 3,00 6,4 400V V1 100 80 125 160 196 138BT-Pump 4,0 - 80 - 4 57052 4,00 8,2 400V V1 100 80 125 170 197BT-Pump 5,5 - 80 - 4 57053 5,50 11,4 400V/ YD B35 100 80 125 170 197 53 12BT-Pump 7,5 - 80 - 4 57054 7,50 15,2 400V/ YD B35 100 80 125 192 218 53 12BT-Pump 5,5 - 100 - 4 57055 5,50 11,4 400V/ YD B35 125 100 125 176 211 53 12BT-Pump 7,5 - 100 - 4 57056 7,50 15,2 400V/ YD B35 125 100 125 176 211 53 12BT-Pump 11,0 - 100 - 4 57057 11,0 21,5 400V/ YD B35 125 100 140 200 232 60 15BT-Pump 15,0 - 100 - 4 57058 15,0 28,5 400V/ YD B35 125 100 140 200 232 60 15BT-Pump 18,5 - 100 - 4 57059 18,5 35,0 400V/ YD B35 125 100 140 265 297 69,5 15BT-Pump 15,0 - 125 - 4 57060 15,0 28,5 400V/ YD B35 150 125 140 235 279 60 15BT-Pump 18,5 - 125 - 4 57061 18,5 35,0 400V/ YD B35 150 125 140 235 279 69,5 15BT-Pump 22,0 - 125 - 4 57062 22,0 41,0 400V/ YD B35 150 125 140 235 279 69,5 15


Pump type g h1 h2 h3 i m1 m2 n1 n2 p1 q t u x ds ks n dL material weightBT-Pump 0,55 - 40 - 4 162 160 160 132 114 111 52 116,2 100 118 145 4 19 GG 45BT-Pump 0,75 - 40 - 4 162 160 160 132 114 111 52 116,2 100 118 145 4 19 GG 47BT-Pump 1,1 - 40 - 4 181 160 160 132 114 117 52 116,2 100 118 145 4 19 GG 51BT-Pump 2,2- 40 - 4 202 180 180 145 124 100 118 145 4 19 GG 65BT-Pump 3,0 - 40 - 4 203 200 225 160 123 100 118 145 4 19 GG 74BT-Pump 1,1 - 50 - 4 186 160 180 152 122 117 60 116,2 120 118 145 4 19 GG 52BT-Pump 1,5 - 50 - 4 186 160 180 152 122 117 60 116,2 120 118 145 4 19 GG 56BT-Pump 3,0 - 50 - 4 202 180 200 164 124 110 118 145 4 19 GG 71BT-Pump 4,0 - 50 - 4 227 180 225 179 131 110 118 145 4 19 GG 84BT-Pump 5,5 - 50 - 4 266 132 225 179 306 140 180 216 256 167 110 118 145 4 19 GG 99BT-Pump 1,1 - 65 - 4 181 160 200 155 130 117 68 116,2 120 8 19 GG 60BT-Pump 1,5 - 65 - 4 181 160 200 155 130 117 68 116,2 120 8 19 GG 64BT-Pump 2,2 - 80 - 4 202 160 225 185 137 138 75 133,4 135 156 180 8 19 GG 86BT-Pump 3,0 - 80 - 4 202 160 225 185 137 138 75 133,4 135 156 180 8 19 GG 88BT-Pump 4,0 - 80 - 4 227 200 250 178 143 120 156 180 8 19 GG 86BT-Pump 5,5 - 80 - 4 266 132 250 178 318 140 180 216 256 167 120 156 180 8 19 GG 106BT-Pump 7,5 - 80 - 4 266 132 280 199 309 178 218 216 256 167 120 156 180 8 19 GG 113BT-Pump 5,5 - 100 - 4 266 132 280 196 262 140 180 216 256 167 120 184 210 8 19 GG 111BT-Pump 7,5 - 100 - 4 266 132 280 196 262 178 218 216 256 167 120 184 210 8 19 GG 119BT-Pump 11,0 - 100 - 4 319 160 280 222 383 210 256 254 300 197 130 184 210 8 19 GG 173BT-Pump 15,0 - 100 - 4 319 160 280 222 383 254 300 254 300 197 130 184 210 8 19 GG 185BT-Pump 18,5 - 100 - 4 358 180 315 248 417 241 287 279 339 258 140 184 210 8 19 GGBT-Pump 15,0 - 125 - 4 319 160 355 256 419 254 300 254 320 197 140 211 240 8 19 GG 231BT-Pump 18,5 - 125 - 4 358 180 355 256 432 279 287 279 339 258 140 211 240 8 19 GG 259BT-Pump 22,0 - 125 - 4 358 180 355 256 432 279 325 279 339 258 140 211 240 8 19 GG 269

76

BLOCK CENTRIFUGAL PUMPS

KRP 40 - KRP 150

The OASE block centrifugal pumpsKRP are characterized by theircompact construction and lowspace requirement. Without exten-sive preparations, time consumingadjustments or the danger of bra-cing of a coupling, the installationcan be arranged quickly.

As normally priming spiral casingcentrifugal pumps they consist ofonly few, but functionally influen-ced, important parts.

Maintenance works can thereforebe arranged fast and easily. Thebasic version is made of grey castiron. Other versions such as bron-ze are available on request.

• Robust and compact construction

• Dimensions and connections to DIN standard

• Motor to IEC-standard

• Easily replaceable motor impeller unit

• Wear-free mechanical seal

• High efficiency closed impeller wheel

• Low speed, reduced wear and low noise

77

Type Art.-No. ID- No. voltage power current MotorDS/DD b1 b2 b3 b4 d h1 h2 h3 h4 l l1 l2 l3 l4 x material weight

KRP 40-160.2/BS/ 0,7/4 580-611 50791 3x400V/50Hz 0,75 kW 1,86 A B 5 65/40 125 130 240 190 14 132 160 12 410 80 70 100 115 GG 34 kgKRP 40-160.2/BS/1,1/4 580-612 50792 3x400V/50Hz 1,10 kW 2,65 A B 5 65/40 125 130 240 190 14 132 160 12 460 80 70 100 115 GG 37 kgKRP 40-200.2/BS/1,5/4 580-613 50793 3x400V/50Hz 1,50 kW 3,60 A B 5 65/40 136 140 265 212 14 160 180 12 480 100 70 100 78 GG 43 kgKRP 40-200.2/BS/ 2,2/4 580-614 50794 3x400V/50Hz 2,20 kW 5,20 A B35 65/40 136 140 196 160 12 100 180 13 36 505 100 154 140 176 78 GG 49 kgKRP 40-250.2/BS/2,2/4 580-615 50795 3x400V/50Hz 2,20 kW 5,20 A B35 65/40 170 170 196 160 12 100 225 13 66 505 100 154 140 176 83 GG 59 kgKRP 40-250.2/BS/3/4 580-616 50796 3x400V/50Hz 3,00 kW 6,80 A B35 65/40 170 170 196 160 12 100 225 13 66 505 100 154 140 176 83 GG 61 kgKRP 40-250.2/BS/4/4 580-617 50797 3x400V/50HzYD 4,00 kW 9,00 A B35 65/40 170 170 226 190 12 112 225 15 54 515 100 151 140 176 83 GG 66 kg

KRP 50-160.2/BS/1,1/4 580-632 50802 3x400V/50Hz 1,10 kW 2,65 A B 5 65/50 130 150 265 212 14 160 180 12 480 100 70 100 128 GG 42 kgKRP 50-200.2/BS/2,2/4 580-634 50804 3x400V/50Hz 2,20 kW 5,20 A B35 65/50 140 150 195 160 12 100 200 13 44 505 100 154 140 176 110 GG 49 kgKRP 50-200.2/BS/3/4 580-635 50805 3x400V/50Hz 3,00 kW 6,80 A B35 65/50 140 150 195 160 12 100 200 13 44 505 100 154 140 176 110 GG 53 kgKRP 50-250.2/BS/4/4 580-636 50806 3x400V/50HzYD 4,00 kW 9,00 A B35 65/50 170 175 226 190 12 112 225 15 58 515 100 151 140 176 81 GG 64 kgKRP 50-315.2/BS/5,5/4 580-637 50807 3x400V/50HzYD 5,50 kW 11,40 A B35 65/50 200 205 256 216 12 132 280 15 68 621 125 174 140 218 93 GG 97 kgKRP 50-315.2/BS/7,5/4 580-638 50808 3x400V/50HzYD 7,50 kW 15,40 A B35 65/50 200 205 256 216 12 132 280 15 68 621 125 174 178 218 93 GG 98 kg

KRP 65-160.2/BS/1,5/4 580-642 50811 3x400V/50Hz 1,50 kW 3,60 A B 5 80/65 135 148 280 212 14 160 200 12 480 100 95 125 122 GG 48 kgKRP 65-160.2/BS/2,2/4 580-643 50812 3x400V/50Hz 2,20 kW 5,20 A B35 80/65 135 148 196 160 12 100 200 13 40 505 100 154 140 176 122 GG 54 kgKRP 65-200.1/BS/3/4 580-644 50813 3x400V/50Hz 3,00 kW 6,80 A B35 80/65 150 163 196 160 12 100 225 13 55 505 100 154 140 176 118 GG 57 kgKRP 65-250.2/BS/5,5/4 580-646 50815 3x400V/50HzYD 5,50 kW 11,40 A B35 80/65 175 185 256 216 12 132 250 15 48 600 100 174 140 218 130 GG 79 kgKRP 65-315.2/B/11/4 580-648 50817 3x400V/50HzYD 11,00 kW 21,50 A B35 80/65 203 218 310 254 15 160 280 25 60 860 125 373 210 255 103 GG 152 kgKRP 65-315.2/B/15/4 580-649 50818 3x400V/50HzYD 15,00 kW 29,50 A B35 80/65 203 218 310 254 15 160 280 25 60 905 125 373 254 300 103 GG 171 kg

KRP 80-160.2/BS/2,2/4 580-650 50819 3x400V/50Hz 2,20 kW 5,20 A B35 100/80 144 175 196 160 12 100 225 13 60 530 125 154 140 176 150 GG 58 kgKRP 80-160.2/BS/3/4 580-651 50820 3x400V/50Hz 3,00 kW 6,80 A B35 100/80 144 175 196 160 12 100 225 13 60 530 125 154 140 176 150 GG 60 kgKRP 80-200.2/BS/4/4 580-652 50821 3x400V/50HzYD 4,00 kW 9,00 A B35 100/80 155 173 226 190 12 112 250 15 52 555 125 164 140 176 166 GG 70 kgKRP 80-200.2/BS/5,5/4 580-653 50822 3x400V/50HzYD 5,50 kW 11,40 A B35 100/80 155 173 260 216 12 132 250 18 32 640 125 174 140 218 166 GG 77 kgKRP 80-200.2/BS/7,5/4 580-654 50823 3x400V/50HzYD 7,50 kW 15,40 A B35 100/80 155 173 260 216 12 132 250 18 32 640 125 174 178 218 166 GG 78 kgKRP 80-250.1/BS/7,5/4 580-655 50824 3x400V/50HzYD 7,50 kW 15,40 A B35 100/80 180 198 266 216 12 132 280 18 63 760 125 324 178 225 143 GG 91 kgKRP 80-250.1/B/11/4 580-656 50825 3x400V/50HzYD 11,00 kW 21,50 A B35 100/80 180 198 310 254 15 160 280 25 35 860 125 373 210 255 143 GG 165 kg

KRP 100-200.2/BS/5,5/4 580-671 50831 3x400V/50HzYD 5,50 kW 11,40 A B35 125/100 160 185 260 216 12 132 280 18 43 640 125 174 140 218 178 GG 82 kgKRP 100-200.2/BS/7,5/4 580-672 50832 3x400V/50HzYD 7,50 kW 15,40 A B35 125/100 160 185 260 216 12 132 280 18 43 640 125 174 178 218 178 GG 83 kgKRP 100-315.2/B/22/4 580-675 50835 3x400V/50HzYD 22,00 kW 40,00 A B35 125/100 218 237 345 279 15 180 315 28 50 980 140 386 279 340 160 GG 237 kg

KRP 125-250.1/B/11/4 580-682 50838 3x400V/50HzYD 11,00 kW 21,50 A B35 150/125 215 252 310 254 15 160 355 25 74 875 140 373 210 255 166 GG 174 kgKRP 125-250.2/B/18,5/4 580-684 50840 3x400V/50HzYD 18,50 kW 34,00 A B35 150/125 215 252 345 279 15 180 355 28 54 941 140 386 241 300 166 GG 220 kg

KRP150-200.2/BS/7,5/4 580-690 50841 3x400V/50HzYD 7,50 kW 15,40 A B35 200/150 230 275 260 216 12 132 370 18 123 656 160 174 178 218 196 GG 134 kgKRP 150-200.2/B/11/4 580-691 50842 3x400V/50HzYD 11,00 kW 21,50 A B35 200/150 230 275 310 254 15 160 370 25 95 895 160 373 210 255 196 GG 206 kgKRP 150-250.4/B/22/4 580-693 50844 3x400V/50HzYD 22,00 kW 40,00 A B35 200/150 218 250 345 279 15 180 400 28 55 1000 160 386 279 340 150 GG 267 kg


78

WATER DISPLAY AND F ILTRATION PUMPS

Profinaut

• Very powerful water display pump with enormous stability

• Handle aligned withthe pump's centre of gravity facilitates balan-ce easy transport and adjustment

• Innovative design usingstainless steel elements,very compact

• Fully capable of over wintering, even if the pump completely freezes over

• Can be conveniently controlled electronically in conjunction with the FM Profi-Master

• Power supply 230 V/50 Hz, single phase

The OASE water display pumpProfinaut are powerful pumps,which are suitable for underwa-ter operation, as well as for dryinstallation. These units packedwith power are available in 3 dif-ferent performance ranges.

They ensure an excitingly newwater display experience in afountain arrangement.

Profinaut 21 27 40Dimensions in mm (LxWxH) 420x220x226 460x234x297Head in m 9,6 10 11Output in l/h 21.800 27.000 40.000Power consumption in W 470 645 1.000Weight in kg 15 15 17Connection in inch 1”, 1 1/2 “, 2”Guarantee 3 + 2 = 5 yearsArt.-No. 924-113 924-123 924-133ID.-No. 56870 56871 56872

• Coarse debris particles up to 8 mm in size are displaced with no problems

• Outstanding displacement capacity

• Enormous stability and a handle that is aligned to the pumps centre of gravity

• Fully capable of over wintering, even if the pump completely freezes over

• Can be conveniently controlled electronically in conjunction with the FM Profi-Master

• Power supply230 V/50 Hz, single phase

These top class filtration andwater course pumps get anyamount of water moving.

Either for designing impressivewater courses and water falls fornew exclusive garden landsca-pes, or for powerful displacementof pond water to the filtrationsystem.

79

Profimax

Profimax 20000 30000 40000Dimensions in mm (LxWxH) 420x240x266 460x260x297Head in m 8 8,5 10Output in l/h 20.000 30.000 41.000Power consumption in W 450 650 1.100Weight in kg 15 15 17Connection in inch 2 2 2Guarantee 3+2= 5 yearsArt.-No. 924-113 924-123 924-133ID.-No. 56873 56874 56875


80

UnderwaterLights

• Underwater Lights page 82

• Underwater Spotlights page 84

• LED-Technology page 100

• Light fitting brackets page 102

• Safety Transformers page 104

82

UNDERWATER L IGHTS

• Slim and low-profile construction

• Can be strung together

• Various types of lamps can be installed

• Highly corrosion-resistant

The OASE UWR K 80/500underwater tube lights, becauseof their slim and flat design, areespecially suitable for the whitemonochrome illumination ofwaterfalls, water runs, water chu-tes or for the illumination of basinedges generally. They can easilybe strung together to form a lightchain since there is a cable inlet(PG 16) on each side.

The transparent tube, made ofspecial plastic, is held by twoplastic end pieces reinforced withglass fibre. Inside there is areflector with four sockets for low-voltage 12 volt halogen lamps upto a max. 20 watt.

The two brackets on the end pie-ces serve as fixings and allowstepless rotation in both direc-tions. Because of their greatvariety, the OASE underwatertubular lamps are delivered with-out cables and bulbs. These haveto be ordered separately and aresent in separate packaging.

UWR K 80/500 Underwater Tube Light

83

Bulb type Colour power Id.-No. Art.-No.

halogen-bulb 12 Volt white 10 Watt 52945 866-526halogen-bulb 12 Volt white 20 Watt 70703 857-508 080

AccessoriesCable 2 x 1,5 mm2, 5 m long 866-550Cable 2 x 2,5 mm2, 5 m long 866-551Cable 2 x 4,0 mm2, 5 m long 866-665

Safety transformer STR 230/12/150 52257 869-550Safety transformer STR 230/12/300 52258 869-551Safety transformer STR 230/12/600 52259 869-552Safety transformer STR 230/12/900 52260 869-553

UWR K 80/500Nominal voltage 12 VoltPower consumption: 4 x 5 = 20 Watt

4 x 10 = 40 Watt4 x 20 = 80 Watt

Lamp current : 240 lumen560 lumen

1400 lumenAngle of emission 120°approx.cable inlets 2 pieces, PG 16Cable length not includedmaterial plastic/stainles steelweight 1,50 kgArt.-No. 866-510Id.-No. 52907


84

UNDERWATER SPOTL IGHT

UWS K 300 / 500

• Focused effect illumination

• Body made of impact-resisting plastic

• Suitable for sealed beam reflector lamps PAR 56

• Rock guard and mounting bracket made of stainless steel

• Colour lenses optional

This spotlight has been especiallydesigned for underwater operati-on and can be operated with sealed beam reflector lamps PAR 56 in 12, 120 and 230 V.


UWS K 300 / 500Dimensions Dia. x H 235 x 225No. Of cable glands 2 / PG 16Cable lengths noneNominal voltage 12, 120, 230VMaterial plasticsWeight 2,6 Kg Id.-Nr.: 57288

Type of lamp (PAR 56) Voltage Power Angle of beam Light- ID-No.and accessories (Volt) (Watt) (degree) intensity (CD)Reflector lamp 12 300 36 - 18 11600 51984Reflector lamp 230 300 12 - 8 40000 51981 Reflector lamp 230 300 40 - 16 9000 51982Reflector lamp 120 500 26 - 12 52000 51985

Safety transformer Prim. 230 900 52260STR 230/12/ 900 Sec. 12 / 13

Colour lens, red 57343Colour lens, yellow 57345Colour lens, green 57346Colour lens, blue 57344

86


Lunaqua 10

walls. The Lunaqua 10-transfor-mer is equipped with 4 couplingsto give choice to connect 4 x 35watt, 3 x 50 watt or 2 x 75 W,12 V.

The Lunaqua 10-power cable setsare equipped with 2 specialconnectors for easy connectionsbetween light and transformer.They are available in 3 differentlengths.

• To be used universally, also outside of water


• Body made ofimpact-resisting plastic


The OASE Lunaqua 10 lightingsystem can be implemented con-structively underwater for foun-tains and water displays, as wellas above water for garden andpark illumination.

The compact spotlights areconnected via special cable setswith the 12-volt safety transfor-mer. Likewise the transformer canbe implemented underwater. Thisenables the bridging of longdistances between the 230-volt-socket and the transformer withstandard cables.

Lunaqua 10 is a light manufac-tured of impact-resistant plastic.The special structured glasscover, in conjunction with thealuminium reflector, creates opti-mal light exploitation. An integra-ted mounting bracket, optionallyalso available in stainless steel,permits a swivel range ofapprox. 180°, when e.g. it ismounted on stone slabs or on

87

Product Lunaqua 10 spotlightdimensions [LxWxH]: 145 x 160 x 182Nominal voltage: 12 V / 50 HzPower consumption max.: 30 - 75 W HalogenAngle of emission: 24°weight: 1,1 kgArt.-No. 860-008Id.-No. 54034

Product UST 150 Transformer for Lunaqua 10dimensions [LxWxH]: 145 x 140 x 59primary voltage: 230 V / 50 Hzsecondary voltage: 12 Vpower consumption: 150 VACable length: 10 mweight: 4,5 kgArt.-No. 860-558Id.-No. 54041

Connection cable weight Id.-No. Art.-No.Connection cable 2 x 1,5 mm2; 2,5 m long 0,40 kg 54305 860-063Connection cable 2 x 1,5 mm2; 5,0 m long 0,60 kg 54306 860-064Connection cable 2 x 1,5 mm2; 7,5 m long 1,10 kg 54307 860-065

Bulb type Colour power Id.-No. Art.-No.halogen-bulb white 35W/12V 54035 860-050halogen-bulb white 50W/12V 54036 860-051halogen-bulb white 75W/12V 54037 860-052

Colour lenses weight Id.-No. Art.-No.Colour disk for Lunaqua 10, blue 0,20 kg 56129 860-122Colour disk for Lunaqua 10, yellow 0,20 kg 56130 860-123Colour disk for Lunaqua 10, green 0,20 kg 56131 860-124Colour disk for Lunaqua 10, red 0,20 kg 56132 860-125


88


Lunaqua 3 FT





Lunaqua 3 FT – a single light unitfor all situations.

This solo variant of the newLunaqua 3 offers the possibility ofestablishing single and also multi-ple spotlight arrangements in par-allel.

Input and output are fitted withhigh quality PG-glands forconnection of H05 and H07cable, which make installationsimple.

The adjustable angle of beamensures object-precise lighting.Just like its siblings from the Setsof Lunaqua 3, this single spotlightis ideally suited for use underwa-ter and above water surface.

The scope of supply for this vari-ant includes a mounting elementwith adjusting unit, as well as aground spike which accommoda-tes the mounting element.

A 20 watt Halogen lamp is inclu-ded. Supply does not includecable and transformer.

Lunaqua 3 FTdimensions (Øx H) 85 x 110mmno. of cable glands 2cable size H05 + H07Halogen lamp 20 WattSuitable for nominal voltage 12 VAngle of emission 10 – 40°guarantee 2 yearsID-Nr. 57141





Lunaqua 5.1 – for those that hunger for light. Often a bit moreis required.

For even more light output andparticularly for installation in larger systems, there is new high-performance spotlight in ourproduct range Lunaqua 5.1.

This spotlight has been especiallydesigned for underwater operati-on and can be operated withreflector lamps PAR 38, E 27,e.g. in 12 V, 100 W.

This “power pack” unit not onlyshines with a fantastic price/per-formance ratio, but also the sim-ple and safe installation, as wellas the possibility of establishingsingle and also multiple spotlightarrangements in parallel, willconvince your customers.

Connection possible for H05 and H07 cable using high-quality PG-glands. Connection cable,transformer and reflector lampare not included in the scope of supply.

89

Lunaqua 5.1


Lunaqua 5.1dimensions (Øx H) 145 x 210 mmno. of cable glands 2cable size H05 and H07for reflector lamp PAR 38 max. 150 Wattrecommended voltage 12 Vsocket E 27cable not includedguarantee 2 yearsID-Nr. 57076

Bulb type power voltage angle of emission weight Id.-No.reflector-lamp, PAR 38 120 W 230 V* 12° 0,4 kg 51301reflector-lamp, PAR 38 120 W 230 V* 30° 0,4 kg 51302reflector-lamp, PAR 38 120 W 24 V 10° 0,4 kg 51979reflector-lamp, PAR 38 100 W 12 V 30° 0,4 kg 56812*= not for fountain basins or similar applications

90


UWS TN 508



• Power consumption 50 W

• Can be strung together

• Made from highly corrosion-resistant tombak

The OASE UWS TN 508 under-water spotlights, because theyare small and robust, are especi-ally suitable for illuminatingsingle fountain jets and water dis-plays or plants.

Their strong and stable construc-tion, from corrosion resistant tom-bak, means that they are anexcellent choice for use in publicinstallations.

As they have two PG16 cableinlets, they can quickly be strunginto a light chain. The method ofchanging bulbs and fitting colou-red discs is extremely easy.

91

UWS TN 508Nominal voltage 12 VoltPower consumption 50 WattLight intensity 1100 CandelaAngle of emission 30°cable outlets 2 pieces, PG 16Cable length not includedmaterial Tombakweight 1,10 kgArt.-No. 862-550Id.-No. 51446

Accessories Id.-No. Art.-No.

Colour disk red 51439 862-523Colour disk blue 51440 862-524Colour disk yellow 51441 862-525Colour disk green 51442 862-526

Cable, 2 x 1,5 mm2, 5 meter long 866-550Cable, 2 x 2,5 mm2, 5 meter long 866-551Cable, 2 x 4,0 mm2, 5 meter long 866-665



light distribution in Candela,Halospot 12 V, 50 W, 30°

Illum. intensity in Lux

92


UWS T 111 and UWS TS 111

ping rings provide the possibilityfor precise adjustment andfocusing.

Due to the wide range of halogenlight bulbs and cable available,these have to be ordered separa-tely.

glass lens is screwed flush to themain body.

A smooth and edgeless surface,where no dirt can accumulate, willreduce cleaning intervals to aminimum. However the type UWSTS 111 spotlight with built- inniche made from high-grade steel,can be swivelled 12,5°to eitherside and sits flush with the bottomsurface of the basin. Two clam-

• Extremely robust construction

• Bullet-proof glass cover

• Smooth, plane surface, easily to be cleaned

• Made of highly corrosion-resistant tombak and high-grade steel


The OASE UWS T 111 and UWS TS 111 underwater spot-lights were designed for professio-nal application in public installati-ons. They are suitable for theunderwater illumination of foun-tains and water displays, as wellas above water up to 50 W to illu-minate sculptures, buildings,shrubs, bushes or trees etc. Thespotlight body is made of cast tom-bak and has a PG 16 cable inlet.Alternatively available, at specialorder, are two cable inlets.

In both types of spotlights the halo-gen-reflector lamp is protected bya 15-mm-bullet-proof glass, shiel-ding it for almost all possibledemands. Therefore no furtherrock guard is necessary.

By means of a gasket and a tom-bak clamp ring the bullet-proof

Product UWS T 111 UWS TS 111Nominal voltage 12 Volt 12 VoltPower consumption 50, 75 or 100 Watt 50, 75 or 100 WattLight intensity 4500 - 50000 Candela 4500 - 50000 CandelaAngle of emission 10°or 30° 10°or 30°cable outlets 1 pieces, PG 16 1 pieces, PG 16Cable length not included not includedmaterial Tombak/stainles steel Tombak/stainles steelweight 4,00 kg 11,00 kgArt.-No. 863-600 863-625Id.-No. 52904 52909

93

Bulb type Colour power angle Id.-No. Art.-No. halogen-reflector bulb 12 Volt white 50 Watt 30° 52939 863-651halogen-reflector bulb 12 Volt white 75 Watt 30° 52941 863-653halogen-reflector bulb 12 Volt white 100 Watt 10° 52942 863-654halogen-reflector bulb 12 Volt white 100 Watt 30° 52943 863-655

AccessoriesCable, 2 x 4,0 mm2, 5 m long 866-665Cable, 2 x 6,0 mm2,10 m long 866-666



light distribution in cd, OASE UWS TS 111,Halospot 12 V, 50 W, 5°


light distribution in cd, OASE UWS T 111,Halospot 12 V, 50 W, 30°










Underwater spot light UWS T 111

Underwater spot light UWS TS 111

94


Multi-Power MP T 3 and MP TS 3

for almost all possible demands.Therefore no further rock guard isnecessary. By means of a gasketand a tombak clamp ring the bul-let-proof glass lens is screwedflush to the main body.

A smooth and edgeless surface,where no dirt can accumulate,will reduce cleaning intervals to aminimum.

However the type MPT TS 3 spot-light with built-in niche madefrom high-grade steel, can beswivelled 12,5° to either sideand sits flush with the bottom sur-face of the basin. Two clampingrings provide the possibility forprecise adjustment and focusing. Due to the wide range of halogenlight bulbs and cable available,these have to be ordered separa-tely.






• Option of different lamp colours

The OASE MP T 3 and MP TS 3underwater spotlights were desi-gned for professional applicationin public installations. They aresuitable for the underwater illumi-nation of fountains and water dis-plays, as well as above water upto 50 W to illuminate sculptures,buildings, shrubs, bushes or treesetc.

The spotlight body is made ofcast tombak, and designed totake 3 Halogen reflector lamps(single or multi-colour). It has gota PG 21 cable inlet. Alternativelyavailable, at special order, aretwo cable inlets. In both types ofspotlights the halogen-reflectorlamps are protected by a 15-mm-bullet-proof glass, shielding them

Product Multi-Power MP T3 Multi-Power MP TS 3Nominal voltage 12 Volt 12 VoltPower consumption 3 x 50, oder 3 x 75 W 3 x 50 oder 3 x 75 WattLight intensity 7500 - 45000 Candela 7500 - 45000 CandelaAngle of emission 8, 24° 8, 24°cable outlets 1 pieces, PG 21 1 pieces, PG 21Cable length not included not includedmaterial: Tombak/stainles steel Tombak/stainles steelweight 4,50 kg 12,00 kgArt.-Nr.: 863-640 863-641Id.-Nr.: 52908 52905

95

Bulb type Colour power angle Id.-No. Art.-No.halogen-reflector bulb 12 Volt white 50 Watt 24° 52920 863-826halogen-reflector bulb 12 Volt white 75 Watt 24° 52923 863-829halogen-reflector bulb 12 Volt red 50 Watt 8° 52925 863-925halogen-reflector bulb 12 Volt yellow 50 Watt 8° 52926 863-926halogen-reflector bulb 12 Volt green 50 Watt 8° 52927 863-927halogen-reflector bulb 12 Volt blue 50 Watt 8° 52928 863-928

AccessoriesCable, 2 x 4,0 mm2, 5 m long 866-665Cable, 2 x 6,0 mm2,10 m long 866-666



Underwater spotlightMP T3

Underwater spotlightMP TS 3

light distribution in cd, OASE UWS MP T 3,Decostar 3x12 V, 3x50 W, 12°


light distribution in cd, OASE UWS MP T 3,Halospot 3x12 V, 3x75 W, 14°










96


Multi-Power MP T 7

power range of 12 V, 50 W or12 V/75 W and therefore produ-ce a light bundle of 350 respec-tively 525 Watt. The light body isequipped with 2 PG 21 cableinlets. Alternatively available, atspecial order, are units with 4cable inlets.

The halogen-reflector lamps areprotected by a 15-mm-bullet-proof glass, shielding them foralmost all possible demands.Therefore no further rock guard isnecessary. By means of a gasketand a tombak clamp ring thebullet-proof glass lens is screwed

• Powerful illumination






• Option of different lamp colours

An impressive water displayrequires powerful underwaterspotlights, to ensure also at dar-kness a breathtaking effect.

The OASE MP T 7 underwaterspotlights was designed for pro-fessional application in publicinstallations. It is suitable for theunderwater illumination of foun-tains and water displays, as wellas above water up to 7x 50 W toilluminate sculptures, buildings,shrubs, bushes or trees etc. Thespotlight body is made of casttombak, and designed to take 7halogen reflector lamps (single ormulti-colour). The halogen reflec-tor lamps are available in a

Product Multi-Power MP T7Nominal voltage 12 VoltPower consumption 7 x 50 = 350, oder 7 x 75 = 525 WattLight intensity 10500 - 88750 CandelaAngle of emission 8°, 24°cable outlets 2 pieces, PG 21Cable length not includedmaterial: Tombak/stainles steelweight 8,50 kgArt.-No. 863-800Id.-No. 52906

flush to the main body. A smoothand edgeless surface, where nodirt can accumulate, will reducecleaning intervals to a minimum.For a smooth and plane installati-on, flush to the bottom surface orwall, special stainless steel nichescan be provided optionally onrequest. Due to the wide range ofhalogen light bulbs and cablesavailable, these have to be orde-red separately. For single colourlighting and the resultant relative-ly high power output, two powercables are necessary.

97

Bulb type Colour power angle Id.-No. Art.-No. halogen-reflector bulb 12 Volt white 50 Watt 24° 52920 863-826halogen-reflector bulb 12 Volt white 75 Watt 24° 52923 863-829halogen-reflector bulb 12 Volt red 50 Watt 8° 52925 863-925halogen-reflector bulb 12 Volt yellow 50 Watt 8° 52926 863-926halogen-reflector bulb 12 Volt green 50 Watt 8° 52927 863-927halogen-reflector bulb 12 Volt blue 50 Watt 8° 52928 863-928

Accessories2 pieces Cable, 1 x 10,0 mm2, 5 meter long 52947 866-8752 pieces Cable, 1 x 16,0 mm2, 10 meter long 52948 866-8761 pieces Cable, 5 x 2,50 mm2, 5 meter long 52931 866-9201 pieces Cable, 5 x 4,00 mm2, 10 meter long 52932 866-921

Safety transformer STR 230/12/600 52259 869-552Safety transformer STR 230/12/900 52260 869-553














98


Profilux E100 and E101

• 50, 75 or 100W halogen light bulbs

• High quality stainless steel spot light

• Stainless steel bracket for simple and safe installation

• With PG-16-cable inlet

The OASE Profilux E100 and E101 underwater spotlights,because of their small dimen-sions, are especially suitable foreffective illuminating single foun-tain jets and water displays orplants.

The complete set E 100, with100 W lamp, 7,5 m cable andsafety transformer, is additionallyequipped with a built-in thermoprotection.

The robust high quality stainlesssteel construction is ideal forinstallation in public displays.The spotlight is equipped with aPG 16-cable inlet and a swivelstainless steel bracket.

99

Product Profilux E100 Profilux E101dimensions in mm (ØxH): 160 x 134 160 x 134Angle of emission: 24° 24°Light intensity in cd: 8400 4000 - 5000Bulb type: 12 V / 50 Hz 12 V / 50 HzPower consumption max.: 100 W Halogen 50, 75 W HalogenCable length in m: 7,5 not includedguarantee: 2 years (excl. bulb) 2 yearsArt.-No. 890-200 –Id.-No. 56898 56133


E100/100W

100

LED-TECHNOLOGY

BEST-LED-222

OASE LED flush mounted projec-tors are ideal for fountain dis-plays without open water surfa-ces. They are traversable at fullsurface and can be integratedinto nearly every tiling of naturalstone or pavement.

• High- performance LEDflush mounted built in projector

• With integratedelectronics

• Central nozzle opening fo nozzles of different size


• Cover flange made of stainless steel

• Power consumption 20 W approx.

• Very long life time of luminaries

• Extremely compact construction

• For continuous multi-colour change

In connection with a vario switchsystem, completely new-type out-door areas of fountain systemscan be created. The precise cen-tral arrangement of nozzle resultsin an absolutely symmetrical illu-mination, performing continuousvariation of colour nuances.

101

Product BEST-LED-222Nominal voltage: 24 V / DCPower consumption: 20 W approx.Schutzglasstärke: 6 mmweight: 2,5 kgSchutzart: IP 58material: stainles steel/TombakArt.-No. --Id.-No. 56779


102

L IGHT F ITT ING BRACKETS

Light fitting brackets SWH 10-20, SWH 25

• Robust finish

• Suitable for 2-6 light fittings

• Simple pipe mounting by clamping

• Can be used for different type of light fittings due to fixations with oblong holes

The OASE light fitting bracketsSWH 10-20 and SWH 25 arestable fixations with adjustablerapid-action clamping device for attachment to all types ofpipes, suitable for use below and above water level. Using a corrosion-resisting all-metaldesign, spotlights, as well as appropriate underwater trans-formers in any number from 1 to 6 pieces can be fixed sym-metrically e.g. around a nozzlespipe.

103

Product SWH 10-20 SWH 25material stainles steel stainles steelLight fitting brackets: 1 to 3 pieces 1 to 6 piecesPipe size: 1” - 2 1/2” 1” - 2 1/2”Suitable for lights K2, K3, TN 508, K2, K3, TN 508,

T111, MPT3, K5.1, E101 T111, MPT3, K5.1, E101weight: 2,8 kg 3,5 kgArt.-No. 870-078 870-079Id.-No. 55844 55842


variants of equipment

104

SAFETY TRANSFORMERS

Safety Transformers STR 230/12

• Splash water protected

• With 3 outlet terminals

• Secondary terminals in 12 V and 13 V

The OASE safety transformer ofthe “STR 230” series are particu-larly suitable for use in damplocations, due to their splashwater protection, and especiallyfor power supply to 12-V-under-water spotlights.

Via 3 separate cable outlet termi-nals individual illumination cir-cuits can be operated. Both sidesof the winding, i.e. the primaryand secondary are protected byseparate fuses. Additionally alltransformers are protected bymeans of a thermal switchagainst temperature overloads.

105

STR 230/12/600 STR 230/12/900prim. - sec. prim. - sec.

Protection class IP 65 IP 54 IP 65 IP 54Nominal voltage (V) 230 V 3 x 12 V / 3 x 13 V 230 V 3 x 12 V / 3 x 13 VNominal current (A) 2,75 3 x 16,7 A 4,1 A 3 x 25 ANennleistung (VA) 600 VA 3 x 200 / 217 VA 900 VA 3 x 300 / 325 VAFuse prim./sec. 1 x 4,0 A 3 x 20 A 1 x 6,3 A 3 x 25 Aslow ICE 127-3Thermal switch Microtherm Microtherm

D74 130° D74 130°No. of terminals 9 x 42 9 x 42

Cable gland 3 x PG 16 3 x PG 16Art.-No. 869-552 869-553Id.-Nr.: 52259 52260

STR 230/12/150 STR 230/12/300prim. - sec. prim. - sec.

Protection class IP 65 IP 54 IP 65 IP 54Nominal voltage (V) 230 V 3 x 12 V / 3 x 13 V 230 V 3 x 12 V / 3 x 13 VNominal current (A) 0,8 3 x 4,2 1,4 3 x 8,3Nennleistung (VA) 150 VA 3 x 50 / 53 VA 300 VA 3 x 100 / 108 VAFuse prim./sec. 1 x 1,0 A 3 x 6,3 A 1 x 2,0 A 3 x 10 Aslow ICE 127-3Thermal switch Limitor Microtherm

Q 62 110° D74 130°No. of terminals 9 x 2,52 9 x 2,52

Cable gland 3 x PG 13,5 3 x PG 13,5Art.-No. 869-550 869-551Id.-Nr.: 52257 52258


106

Electrotechnology

• Cable Inlet Fittings page 108

• Terminal Boxes page 112

• Electrical Switch Plants page 114

• Electrical Components page 118

• Water Level Controls,Water Level Sensorsand Solenoid Valves page 122

• Electronic Water Level Control Units page 124

• Wind Level ControlSystems page 126

108

POWER SUPPLY F ITT INGS

• Professional solutions

• For small, medium andlarge size basins

• Also for basins with foil linings

• Problem-free connection to cable protection pipes

OASE cable inlet fittings serve aswater-tight inlets for electricalcables into fountain basins, waterbasins, overflow basins, watercourses, water troughs, ponds,water reservoirs, pump roomsetc.. They comprise of the fittinghousing, flange plate, seal andcable glands. As a rule, cableinlet fittings are situated at theend of a conduit leading from theswitchboard to the water basin.For the larger cable inlet fittingsthe connecting sockets are simplyplugged into the sleeves of thecable protection pipes (standardwaste water drain pipe KG or EDhouse installation pipe) andcemented in. The smaller fittings,except KDW 1, are screwed ontothe PE pipe with a pipe thread.All cable inlet fittings, exceptKDW 1, have drilled holes for connecting to potential equalisation. The larger fittingsKD 12/100 T as well as KDF 4/70T to KD 7/100T, as astandard, are suitable for basinswith a liner coating.

Cable Inlet Fittings KDW 1 - KD 12/100T

109

OASE-cable inlet fittingKDW 1quantity of cable inletsPG 16: 1 Piececable diameter: 7 - 11 mmfor foil linings : yesMaterial: Ms, plasticWeight: 0,15 kgArt.-No.: 851-506ID.-No.: 51328

KD 7/100 T


OASE-cable inlet fitting KDF 4/70 Tquantity of cable inlets PG 16: 4 PiecePiece cable diameter: 7 - 14 mmjoining: Sleeve DN 70 EDfor foil linings : yesMaterial: TombakWeight: 4,10 kgArt.-No.: 852-575ID.-No.: 52607

OASE-cable inlet fitting KDF 7/100 Tquantity of cable inlets PG 16: 7 Piececable diameter: 7 - 14 mmjoining: Sleeve DN 100 KGfor foil linings : yesMaterial: TombakWeight: 6,00 kgArt.-No.: 852-580ID.-No.: 52608

OASE-cable inlet fitting KD 12/100 Tquantity of cable inlets PG 16: 12 Piececable diameter: 7 - 14 mmjoining: Sleeve DN 100 KGfor foil linings: yesMaterial: TombakWeight: 8,70 kgArt.-No.: 852-556ID.-No.: 51768

OASE-cable inlet fitting KD 7/100 Tquantity of cable inlets PG 16: 7 Piececable diameter: 7 - 14 mmjoining: Sleeve DN 100 KGfor foil linings : noMaterial: TombakWeight: 4,90 kgArt.-No.: 852-555ID.-No.: 51337

OASE-cable inlet fittingKD 1/10 Equantity of cable inletsPG 16: 1 Piececable diameter: 7 - 14 mmjoining: G1for foil linings : noMaterial: high-grade steelWeight: 0,55 kgArt.-No.: 852-552ID.-No.: 51741

OASE-cable inlet fitting KD 4/70 Tquantity of cable inletsPG 16: 4 Piececable diameter: 7 - 14 mmjoining: Sleeve DN 70 EDfor foil linings : noMaterial: TombakWeight: 3,20 kgArt.-No.: 852-554ID.-No.: 51336

OASE-cable inlet fitting KD 2/15 Equantity of cable inlets PG 16: 2 Piececable diameter: 7 - 14 mmjoining: G1 1/2for foil linings: noMaterial: high-grade steelWeight: 0,90 kgArt.-No.: 852-553ID.-No.: 51740

KDF 7/100 T

110


Cable Inlet Fittings KDW 1 - KD 12/100 T

KD 4/70 T KDF 4/70 T

111

KD 7/100 T KDF 7/100 T

KD 12/100 TKD 19/100 T(on request)



Submersible Terminal Boxes

• Approved solutions

• For small, medium and large-size requirements

• With transparent lid for easy control

• Corrosion resistant design

OASE submersible terminalboxes provide a connection pointfor electrical components, suchas underwater pumps or under-water lighting, in all fields of water technology. They provi-de a problem-free solution forconnecting and disconnectingpower cables, usually run in con-duits, to the power consumers.Disconnecting the power supplymay be necessary, e.g., whenremoving an item for the winter,or for maintenance and repairpurposes. With OASE submersi-ble terminal boxes, it is generallypossible to connect and dis-connect without draining thepool. UKK 1 K is a particularlyeconomical solution for domesticor small scale use. The largermodels have a transparent coverwhich gives the possibility tokeep a visual check on the even-tual build-up of condensation. Allsubmersible terminal boxes haveone or more blind plugs forglands, actually not in use.

112

113

OASE UKK T 4/21submersible terminal boxquantity of screws PG 21: 4 Piececable diameter: 14 - 21 mmnumber of 20 mm2 terminals: 6 Piecequantity of 10 mm2

earthed terminals: 2 PieceMaterial: TombakWeight: 4,40 kgArt.-No.: 852-509ID.-No.: 51975

UKK 1 K UKK T 3 UKK T4/21 UKK T8/16


OASE UKK T 3submersible terminal boxquantity of screwsPG 16: 4 Piececable diameter: 7 - 14 mmnumber of 2,5 mm2 terminals: 5 Piecenumber of 2,5 mm2


OASE UKK 1 K submersible terminal boxquantity of screws PG 16: 2 Piececable diameter: 7 - 14 mmnumber of 2,5 mm2 terminals: 5 PieceMaterial: PlasticWeight: 0,20 kgArt.-No.: 852-508ID.-No.: 51335

OASE UKK T 8/16submersible terminal boxquantity of screws PG 16: 8 Piececable diameter: 7 - 14 mmnumber of 6 mm2 terminals: 16 Piecequantity of 6 mm2


ELECTRICAL SWITCH PLANT AND CONTROL CABINETS

• Especially for public fountain installations

• Complies with all necessary safety and security precautions

• Wired and ready for start-up

114

Electrical Switch Plant Standard andSpecial Versions


ELECTRICAL SWITCH PLANT AND CONTROL CABINETS

OASE-control cabinets are theswitching and control centres of afountain or water display installa-tion. Manufactured according tothe latest technical standards andin accordance with all necessarysafety and security precautions,they fully comply with VDE regu-lations. A residual circuit breakerinstantly switches off the unit,should a fault current loadexceed 30 mA, guaranteeingsafety for men and animals.

A “Manual-0-Automatic” switchin combination with a 2-channel-timer allows for the automaticswitching on of pumps, lightingcircuits and water level control.With the switching position on“manual” the individual directswitching on of all componentsfor control purposes is possible.Automatic circuit breakers protectthe components from overloadand short circuit. Special motorprotection switches with 2-phase-protection protect the motor incase of overload and 2-phaseoperation. Corresponding switchplants for various applicationscan be chosen from a standardprogram. Furthermore OASE willmanufacture whichever individu-al switch plants with additionalinstallations according to clientsrequests.

116

Electrical Switch Plants in Standard andSpecial Version

117

Type EL 111 D EL 100 YD EL 101 YD EL 110 YD EL 111 YDEnclosure size D E E E EProtection system IP 55 IP 55 IP 55 IP 55 IP 55Input voltage (V)(AC) 50/60 Hz 3x400 3x400 3x400 3x400 3x400Residual circuit breaker (A)(A) 40 / 0,03 40 / 0,03 40 / 0,03 40 / 0,03 40 / 0,03Timer, no. of channels 2 2 2 2 2Output voltage (V)(AC) 50/60 Hz 3x400 6x400 6x400 6x400 6x400Output load pump (kW) 1 x 4,0 1 x 11,0 1 x 11,0 1 x 11,0 1 x 11,0Type of motor start d.o.l. YD YD YD YDMotor protection yes yes yes yes yesMotor current to indicate to indicate to indicate to indicate to indicateOutput voltage illumination (V)(AC) 50/60 Hz 1 x 230 none none 1x230 1x230Output load (kW) 1 x 2,30 none none 1 x 2,30 1 x 2,30Output voltage water level control (V)(DC) 24 none 24 none 24Output load water level control 1 x 15 none 1 x 15 none 1 x 15No. of M-O-A switches 3 1 2 2 3No. of indicator lights 3 1 2 2 3Weight kg 7.2 7 7.2 7.2 7.5Art.-No. 853-563 853-580 853-581 853-582 853-583Id.-No. 51348 – – – –


Type EL 100 W EL 101 W EL 110 W EL 111 W EL 100 D EL 101 D EL 110 DEnclosure size A D A D A D D Protection system IP 55 IP 55 IP 55 IP 55 IP 55 IP 55 IP 55 Input voltage (V)(AC) 50/60 Hz 1x230 1x230 1x230 1x230 3x400 3x400 3x400 Residual circuit breaker (A)(A) 25 / 0,03 25 / 0,03 25 / 0,03 25 / 0,03 25 / 0,03 25 / 0,03 25 / 0,03 Timer, no. of channels 2 2 2 2 2 2 2 Output voltage (V)(AC) 50/60 Hz 1x230 1x230 1x230 1x230 3x400 3x400 3x400 AOutput load pump (kW) 1 x 0,55 1 x 0,55 1 x 0,55 1 x 0,55 1 x 4,0 1 x 4,0 1 x 4,0Type of motor start d.o.l. d.o.l. d.o.l. d.o.l. d.o.l. d.o.l. d.o.l. Motor protection no no no no yes yes yes Motor current to indicate to indicate to indicate Output voltage illumination (V)(AC) 50/60 Hz none none 1 x 230 1 x 230 none none 1 x 230 Output load none none 1 x 0,30 1 x 0,30 none none 1 x 2,30 Output voltage water level control (V)(DC) none 24 none 24 none 24 none Output load water level control none 1 x 15 none 1 x 15 none 1 x 15 none No. of M-O-A switches 1 2 2 3 1 2 2 No. of indicator lights 1 2 2 3 1 2 2 Weight kg 6 6.2 6.2 6.8 6.2 6.4 6.6 Art.-No. 853-550 853-551 853-552 853-553 853-560 853-561 853-562 Id.-No. 51341 51342 51343 51344 51345 51346 51347

ELECTRICAL SWITCH PLANT AND CONTROL CABINET

Electrical Components

• Especially developed for OASE

• For the experienced expert in electrical switch plants

• With complete manual

The company OASE developedadditional sets for the specialrequirements in fountain techno-logy, so far unavailable on themarket. These components aredesigned for the experiencedinstallation expert. The followingparts are available:

118

119

Casing: plasticProtection system: IP 20Voltage: 230 Volt/ACSwitches: 1 pieceIndicator lights: 1 pieceWeight: 0,10 kgArt.-No.: 853-707ID.-No.: 53910

OASE change over switch for method of operation PSE 2000 M-0-AChange over switch for the “manual-off-automatic“ function.

OASE power supply PSE 2000 NT 24/18Power supply 230/24 Volt/18VA for the electrical supply of the following components.

Casing: plasticProtection system: IP 20Input voltage: 230 Volt/ACOutput voltage: 24 Volt/DCOutput power: 18 WattIndicator lights: 1 pieceWeight: 0,40 kgArt.-No.: 853-708ID.-No.: 53911

OASE water level control unit PSE 2000 EWR/E 1Electronic control for the automatic freshwater refilling using a solenoid valve and the water level electrodes “min.“,“max“ and “common“.

Casing: plasticProtection system: IP 20Input voltage: 230 Volt/ACSolenoid valve: 230 Volt/AC/5,0 Amp.Solenoid valve: 24 Volt/DC/0,5 Amp.Pump: 230 Volt/AC/5,0 Amp.Switches/keys: yesIndicator lights: yesTerminal electrodes: 3 piecesDry running protection: noAlarm possible: noWeight: 0,20 kgArt.-No.: 853-705ID.-No.: 53908


ELECTRICAL SWITCH PLANT AND CONTROL CABINET

Electrical Components

120

Casing: plasticProtection system: IP 20Voltage: 24 Volt DCPotential-free contact: 4 piecesRated voltage: 230 Volt ACOperational current 5 A AC/DCSwitches/keys: 5 piecesIndicator lights: noWeight: 0,30 kgArt.-No.: 853-703ID.-No.: 53906

OASE wind level control PSE 2000 WFA 3Electronic component to switch off the fountain pumps in maximum three steps according to the windlevel, combined with a wind anemometer.

121

OASE Speed Regulator ODS 2000 WThe OASE Speed Regulator ODS 2000 W is a stage-less high power controller for asynchronous alternating current pumps and serves for the easy regulation of the fountain height and output of pumps respectively.

Areas of application:The following OASE pump types with canned motor can be operated with the Speed Regulator ODS 2000:Atlantis 150, 250 W / Atlantis 200, 550 W 230 V 50 HzUSP 412 W, 550 W / USP H 422 W, 990 W 230 V 50 HzUSP 512 W, 850 W / USP H 522 W, 1160 W 230 V 50 HzUSP 662 W, 1200 W 230 V 50 Hzseries Profinaut and Profimax, 230 V 50 Hz


Regulation: IC-controlledCasing: metal housing, powder-coated

protection class 1Dimensions (LxWxH) 150 x 100 x 75 mmProtection system: IP 50 (except earth contact type socket)

not appropriate for wet rooms and outdoor

Weight: 800 gTerminal: 1,5 m flex -

earth contact type socket for consumer loadTerminal voltage: 230 V, 50 HzPermanent load: max. 1200 WShort-term load: max. 1500 WControl range: 23 – 230 VFuse: F 10 AArt.-No.: 879-511ID.-No.: 51565

ELECTRONIC WATER LEVEL CONTROL UNITS

water level sensor is for moreimportant level differences of2000 to 3000 mm approx., e.g.in water reservoirs and has iden-tical functions.

It has a common-electrode, aminimum electrode and a maxi-mum electrode. A dry runningprotection electrode and a highlevel electrode can be addedoptionally. The electrodes are tobe adjusted corresponding to thewater level requirements. Thesolenoid valves to be connectedshould be preferably at 24 V,since they offer more safety andreliability.

the solenoid valve, the refilling offreshwater is thereby interrupted.As a result of evaporation, splas-hing or other water losses thewater level sinks until the mini-mum electrode is exposed. If it isno longer covered by water, thesolenoid valve will open until thewater level reaches the maximumelectrode.

With the EWR 1 water level con-trol, it is possible to protectpumps from dry-running by simp-ly making the connections to therelevant terminals provided onthe relay. Smaller AC pumps canbe connected directly.

The WSS 20-3 and WSS 20-4water level sensors have a high-grade steel housing, which also

functions as the common electro-de. In the housing there is a mini-mum and a maximum electrode.The difference of level is perma-nently set to 20 mm. The WSS 20-4 version has an addi-tional dry running protectionelectrode. The WSS 2000-3/5

• For automatic freshwater refilling and replenishing

• With dry running protection and alarm

• For different water levels

• For 24 V DC or 230 V ACsolenoid valve

The OASE electronic water levelcontrol unit maintains a constantwater level in fountain basins,swimming pools, ponds or contai-ners. Water loss due to evapora-tion or splashing is automaticallyreplaced from the fresh waterpipeline. The water level controlunit basically consists of threecomponents: the electronic waterlevel control unit, a water levelsensor and a solenoid valve.According to the type and field ofuse, different versions of individu-al components are available. Theelectronic water level control isthe switching centre of the controlunit. If the switch is set to “auto-matic” and the basin is empty,the solenoid valve in the freshwa-ter supply pipe is opened. Thefreshwater flows in until the maxi-mum electrode is reached. Thewater now makes a conductiveconnection between the earthelectrode and the maximum levelelectrode. A totally harmless, lowvoltage switching-control currentflows and the electronics close

122

Water Level Controls, Water Level Sensors,Solenoid Valves

123

A: PumpB: Fountain attachment nozzleC: Overflow-drain pipeD: Overflow-drain armatureE: Freshwater inlet armatureF: Freshwater inletG: Cable lead-out armatureH: Cable connection pipeI: Water level sensorJ: Power supply pumpK: Sensor-cableL: Gate valveM: Solenoid valveN: Water level controlO: Dirt strainerP: Gate valve with drain

1. the possibility to add a dry running protection electrode

2. the possibility to add ahigh water electrode andalarm signal

3. the possibility of parallelcontrol of two different waterlevels, but without high wateralarm and dry- runningprotection.

The EWR 2 water level control has, unlike EWR 1, the following extra functions:


WATER LEVEL CONTROL UNITS

Electronic Water Level Control Unit

With the EWR 2 water level controlit is possible to control the waterlevel, as described under EWR 1.In addition, by using a further elec-trode, it is possible to protectpumps from dry-running by simplymaking the connections to the rele-vant terminals provided on therelay. Smaller AC pumps can beconnected directly. When, due to afault, the fresh water flow is notinterrupted by the solenoid valveand the water level should then risehigher, and reach the high levelelectrode in the WSS 2000 sensor,the alarm would be activated. TheWSS 20-3 and WSS 20-4 waterlevel sensors have a high-gradesteel housing, which also functionsas the common electrode. In the housing there is a minimum and a maximum electrode. The difference of level is permanently set to 20 mm. TheWSS 20-4 version has an additio-nal dry running protection electro-de. The WSS 2000/3/5 waterlevel sensors are for greater leveldifferences of up to 2000 mm,e.g. in water reservoirs and haveidentical functions. They have acommon-electrode, a minimumelectrode and a maximum electro-de. A dry running protection electrode and a high level electro-de can be added optionally. The electrodes have to be set accor-ding to the water level require-ments. The solenoid valves to be connected should be preferably24 V, since they offer more safetyand reliability.

124

EWR 1

EWR 2

WSS2000-3/5

WSS2000-3/5 ZE 2000-1

125

OASE-water level regulator EWR 1 EWR 2Casing: Plastic PlasticProtection system: IP 54 IP 54Input voltage: 230 Volt/50Hz 230 Volt/50HzOutput voltage:Solenoid valve 230 Volt / 50 Hz 230 Volt / 50 Hz

5,0 Amp. 5,0 Amp.Solenoid valve 24 Volt direct current 24 Volt direct current

0,5 Amp. 0,5 Amp.Pump: 230 Volt / 50Hz 230 Volt / 50Hz

5,0 Amp. 5,0 Amp.Switches/keys: 1 Piece 2 PiecesIndicator lights: 1 Piece 1 PieceElectrodes: 3 Pieces 4 PiecesDry running protection: no yesAlarm possible: no yesControl of two water basins: no yesWeight 2,10 kg 2,20 kgArt.-No.: 870-525 870-527ID.-No.: 51554 55846

OASE-water level sensors WSS 20-3 WSS 20-4 WSS 2000-3/5 ZE 2000-1Casing: stainless steel stainless steel Plastic PlasticProtection system: IP 68 IP 68 IP 68 IP 68Electrodes: 3 4 3 1Common: 1 1 1 -Minimum: 1 1 1 -Maximum: 1 1 1 -Dry-running: - 1 - 1Heighwater: - - - -Level difference: 20 mm fix 20 mm fix max. 3000 mm max. 3000 mmCable 10 m: 3 x 1,5 mm2 4 x 1,5 mm2 3 x 1,5 mm2 5 x 1,5 mm2

Weight 2,20 kg 2,30 kg 2,50 kg 3,00 kgArt.-No.: 870-535 870-536 870-400 870-400ID.-No.: 51559 53918 55845 55843

OASE-Solenoid Valve MV 1/2/24 MV 1/24 MV 11/2/24Function: closed without currentNominal width: G 1/2 G 1 G 1 1/2Ways: 2/2 2/2 2/2Voltage: 24 V DC 24 V DC 24 V DCSwitch-in period: 100 % 100 % 100 %Protection system: IP 65 IP 65 IP 65Pressure range: 0,4 - 10 bar 0,4 - 10 bar 0,4 - 10 barMaterial: brass brass brassWeight 0,50 kg 1,30 kg 2,30 kgArt.-No.: 870-530 870-531 870-532ID.-No.: 51556 51557 51558


WIND LEVEL CONTROL SYSTEMS

Control cabinets and anemometer

roof. The wind conditions of theinstallation point of the anemo-meter and the fountain itselfshould nearly be the same. Theimpulse wiring of the anemome-ter should be screened and ledon shortest way to the control boxWFA 3/K.

cabinets of the fountain installati-on. The control cables for thepump are simply lead from themain control cabinet to the corre-sponding terminals of the windcontrol unit. It is recommended toinstall the anemometer near tothe fountain itself, onto a pole orany suitable place on the top of a

• Wind level dependant switching-off in 3 stages

• Electricity saving

• Fresh water saving

• Waste water cost saving

Due to influence of wind waterpatterns of fountains may lookuntidily. The water is driven out ofthe basin and makes the surroun-ding area of the basin wet andmessy. In case of unfavourable orbad wind conditions the OASEwind level fountain control canreduce fountain height step bystep, or switch off system comple-tely. E.g. when operating a foun-tain system with one single pump,using the WFA 3/K wind controlunit, depending on force of wind,the pump can be switched off ata preset wind level. In case e.g.three pumps, working together tofeed one single fountain, firstpump is switched off at first preset level to reduce fountainheight. According to develop-ment of wind force, pump 2 andfinally all pumps are switched off.Another possibility is, to install 2 motor controlled by-pass valvesand, according to the wind velo-city, they can be opened oneafter the other and in a third stepthe pump is switched off. As arule the WFA 3/K control unit ismounted, next to the main control

126

Wind level control unit WFA 3/K Anemometer KCasing: plastic plasticProtection system: IP 54 IP 54Voltage: 230 Volt/50Hz 230 Volt/50HzSwitches/keys: 5 -Indicator lights: 1 -Control cables: 3 -Contact load: 230 Volt/50 Hz, 5 Amp. -Weight: 2,20 kg 0,80 kgArt.-No.: 871-600 871-601ID.-No.: 51838 53913

Possible fountain height in %, wind forth as according to Beaufort.

Wind force according to BeaufortStrength of Medium wind speed

wind Knots km/h m/sek Type of wind Effects0 < 1 < 1,9 < 0,5 stillness vertical smoke1 1 - 3 1,9 - 5,6 0,5 - 1,5 light draught diagonal smoke2 4 - 6 7,4 - 11,1 2,1 - 3,1 gentle breeze just perceptible3 7 - 10 13,0 - 18,5 3,6 - 5,1 l light breeze leaves are moving4 11 - 15 20,4 - 27,8 5,7 - 7,7 moderate breeze twigs are moving5 16 - 21 29,6 - 38,9 8,2 - 10,8 fresh breeze branches are moving6 22 - 27 40,7 - 50,0 11,3 - 13,9 strong wind howling7 28 - 33 51,9 - 61,1 14,4 - 17,0 stiff wind trees are moving8 34 - 40 63,0 - 74,1 17,5 - 20,6 stormy wind trunks are bending9 41 - 47 75,9 - 87,0 21,1 - 24,2 storm tills are falling10 48 - 55 88,9 - 101,9 24,7 - 28,3 strong storm trees are breaking11 56 - 63 103,7 - 116,7 28,8 - 32,4 hurricane like storm roofs are flying12 > 64 > 118,5 > 32,9 hurricane walls are falling


128

Water TreatmentTechnology

• Crystal Quartz Sand Filters page 130

• Stainless Steel Skimmers page 132

• Outlet Fittings, Inlet Fittings page 134

• Water Treatment page 136

switching on, the filter containermust be filled with the filteringmedium (crystal quartz sand).The filtering procedure is as follo-ws: the dirty water is drawn outof the basin by the pump, thenforced through the crystal quartzsand filter bed from above viathe multi-port valve and the upperdistributor, and finally guidedback to the basin via the lowerdistributor and the multi-portvalve. The dirt remains in the pro-fuse hollow spaces created bythe sharpedged crystal quartz

sand grains. When the absorpti-on capacity of the filter bed isused up (monitored at the pressu-re gauge) the direction of themulti-port valve is reversed byswitching to “Backwash” and thefilter bed is washed through inthe opposite direction. In this waythe filter bed is stirred up and loo-sened and the dirt is flushed intothe drain. After this process ofbackwash (to be seen through thetransparent cover of the filtertank) the multi-port valve is swit-ched back to “Filtration”.

130

FILTRATION SYSTEMS

• Powerful filtration

• Easy handling

• Compact unit

• Entirely pre-assembled

OASE crystal quartz sand filtersare used for filtering impuritiesfrom water in fountain basins,water basins, water courses,ponds etc. Thereby achieving a longer duration between cleaning cycles. The crystalquartz sand filter should be runindependently from and parallelto the actual fountain or circulati-on system. This guarantees thatthe filter can be operated duringthe actual running time, periodsof shutdown (such as night time)or during the whole day (full 24 hrs.). The crystal quartzsand filter is composed of a plastic filter tank reinforced withglass fibres, a pump made fromsame material and a multi-portvalve. All components are com-pactly mounted onto a plasticbase and pipe work completelypre-assembled. On top of the fil-ter tank there is a large fillingopening with a transparent coverand pressure gauge. Inside thefilter tank, there is an upper distri-butor with a sieve and a lowerdistributor with small slit tubes. Itis possible to drain the filter tankfrom underneath. Before initial

Crystal Quartz Sand Filters

131

Tables for guidance ref time periods for filtering:Maximum basin water volume for filtering periods of:

QSF 485/4/10Degree of water impurity no. of revolutions/day 9 hr./day - 23:00 – 8:00 15 hr./day - 8:00 – 23:00 24 hr./day - 24:00 – 24:00Low 2 18,00 m3 30,00 m3 48,00 m3

Medium 4 9,00 m3 15,00 m3 24,00 m3

High 6 6,00 m3 10,00 m3 16,00 m3


Medium 4 20,00 m3 34,00 m3 54,00 m3

High 6 14,00 m3 23,00 m3 36,00 m3


Medium 4 29,00 m3 49,00 m3 78,00 m3

High 6 20,00 m3 33,00 m3 52,00 m3

Technische DatenTyp QSF 485/4/10 QSF 610/9/10 QSF 762/13/10Filter tank with transparent coverFilter tank-dia. 485 mm 610 mm 762 mmFilter surface 0,17 m2 0,29m2 0,45m2

Water demand at 10 mH 4 m3/h 9 m3/h 13 m3/hVelocity of filtration at 10 mH 22,22 m/h 31,03 m/h 28,89 m/hVelocity of backwash 33 m/h appr 47 m/h appr. 34 m/h appr.Duration of backwash 2 min appr. 2 min. appr. 2 min.appr.Water demand of backwash 200 l appr. 450 l.appr. 650 l appr.Graining of crystal quartz sand 0,4 – 0,7 mm 0,4 – 0,7 mm 0,4 – 0,7 mmQuantity of crystal quarzsand 60 kg appr. 140 kg appr. 250 kg appr.Max. working temperature 50° C 50° C 50° CMax. working pressure 3,5 bar 3,5 bar 3,5 barConnection suction line G 1 1/2 G 1 1/2 G 2Connection pressure line G 1 1/2 G 1 1/2 G 2Connection backwash line G 1 1/2 G 1 1/2 G 2Motor-rated power 0,25 kW 0,45 kW 0,75 kW Motor-power consumption 0,43 kW 0,68 kW 1,10 kWMotor-rated voltage 230V/50 Hz 230 V/50 Hz 400 V/50 HzMotor-current rating 2,00 A 3,20 A 2,00 AMotor-protection class IP 54 IP 54 IP 54Weight without sand 27 kg approx. 35 kg approx. 65 kg approx.Max. length 840 mm 1000 mm 1000 mmMax. width 675 mm 675 mm 760 mmMax. height 880 mm 1010 mm 1150 mmMaterial of the filter basin Polyester glassfibre-reinforcedMaterial of the pump Polyester glassfibre-reinforcedArt.-No. filter system compl. 872-000 872-001 872-002Id.-No. 53075 53072 53073Art.-No. of crystal quartz sand (bag 25 kg) 872-090 872-090 872-090Id.-No. 53428 53428 53428


F ILTRATION SYSTEMS

Stainless Steel Skimmer + Outlet Fittings

• Skimmer housing made of high-grade steel

• High performance of dirt straining

• Dirt strainer basket, easily to be taken out

• Likewise suitable for basins with liner coating

OASE stainless steel skimmersserve to suck in dirt particles floa-ting on the water surface. Theyare built into the side wall of thebasin and connected to the suc-tion pipe of the filter pump. Inside the large volume, stainlesssteel skimmer housing is a suctionport, masking frame and dirtstrainer basket with a floatingflap. Masking frame, dirt strainerbasket with floating flap form acompact unit. For discharge ofcollected dirt particles this unitcan be easily taken out from thefront side. The floating flap ismoving and adapts to the vary-ing water level. It is provided tobreak the tension of water surfa-ce and increase the suction velo-city of the skimmer inlet. Due tothe increased suction velocity thefloating dirt is sucked into thestrainer basket more efficientlyand stored inside for discharge.The skimmer housing has got asuction port from beneath.

132

133

OASE-skimmer without (with) liner flangeTechn. Data SK 250 E SK 250/F E BAS 70 T FK 70 TSuction port DN 100 DN 100 70/G2 70Material stainless steel stainless steel tombak tombakWeight 7,00 kg 14,00 kg 2,75 kg 0,90 kgArt.-No.: 872-110 872-111 806-530 803-575Id.-No.: 54921 54920 51121 51108


134

FILTRATION SYSTEMS

• Multiple application

• Easy installation

• Corrosion-resistant

The OASE-base outlets with dirtscreen keep coarse dirt particles,accumulating on the basin floor,away from the filter system. Theyare cast from especially corrosi-on-resistant tombak. The OASE-liner flange combined with theOASE-base outlet with dirt screenis used for flanging sealing liners.Also cast from especially corrosi-on-resistant tombak they are sup-plied including all screws andgaskets. The OASE-inlet fittingsESD 15 T serve for returning thefiltered water back into the basin.The inlet direction of jet is adju-stable at the ball-shaped nozzleand is made from high gradestainless steel. For basins withliner coatings a supplementaryliner flange is available. TheOASE-basin floor and wall inletsare indispensable as professionalwater-tight conduits through floors and walls for all kinds of pipe in- and outlet transitions.Made from high grade brass theyare cemented into the floor orwall with a large size puddleflange and earthing terminal. Forbasins with liner coating an addi-tional liner flange is available.

Outlet Fitting BAS 70 T, Inlet Fitting ESD 15 E and Basin Floor and Wall Inlets

135

Techn. Data ESD 15 E BWD15-175 E BWD/F15-175 E BWD20-175 BWD/F20-175Thread G1 1/2 G1 1/2 G1 1/2 G2 G2Material stainless steel stainless steel stainless steel stainless steel stainless steel Weight 0,3 kg 1,10 kg 3,40 kg 2,00 kg 4,65 kgArt.-No.: 872-205 807-526 807-536 807-527 807-537Id.-No.: 53086 51142 51146 51143 51147


136

WATER TREATMENT SYSTEMS

Dosing Units and Accessories

chlorine affects metal, has anunpleasant smell and is proble-matic in application, anothersolution could be a bactericidalagent based on hydrogen peroxi-de or on silver oxide.

• Complete range

• All components brought into line

• All components of superior quality

OASE offers a complete range ofdosing systems and accessories,especially for care and treatmentof water in water display andfountain installations. The vary-ing water qualities of mainswater supply networks and otherinfluences on the fountain watermake filtering and treatment ofwater indispensable.

The constant PH-level should bemaintained between 7,2 and7,6. For this purpose automaticdosing with a PH-control agentbecomes necessary. As a rule,this is achieved by dosing anadditional amount of either acidor leaching solution.

The Anti-Algae Dosing System issuitable for the addition of anti-algae agent, mostly “quaternaryammonium compound“, in pro-portion to the quantity of freshlyrefilled mains water volume. Tokeep the fountain water approxi-mately germ-free, an additionaldosage of bactericidal agent isnecessary. Quite often chlorineproducts such as used in swim-ming pools are applied. But since

137

Techn. Data PHW 30 ADR 90 ASS 100Liters 30 30 10Weight 32,00 kg 32,00 kg 12,00 kgArt.-Nro: 872-025 872-026 800-610ID.-Nro: 53091 56866 51093

Compact-dosing station KDS PH-dosing station PRD Redox-dosing station RRD Anti-algae-dosing station AAD

PH-regulator PHW 30 ADR 90 Anti-algae-liquid ASS 100

1 = Gate/Regulator valve2 = Pressure reducer3 = Strainer4 = Pipe disconnector5 = Water meter6 = Water softening unit7 = Solenoid valve8 = Water meter contr. dos. pump9 = Dosing container10 = Dosing pump11 = Pressure maintaining valve12 = Crystal quartz sand filter13 = Filter pump14 = Electrode box15 = Check valve16 = Fountain pump17 = Suction line18 = Delivery line19 = Filter delivery line20 = Dosing line

21 = Sensor line22 = Freshwater make-up line23 = Inlet nozzle24 = Suction filter basket25 = Fountain attachment26 = Wall inlet combination armature27 = Bottom drain with screen28 = Skimmer


Techn. Data KDS PRD RRD AADWeight 23,0 kg 5,0 kg 4,0 kg 4,0 kgArt.-No.: 872-038 872-022 872-031 872-040ID.-No.: 55370 55372 55373 53068

138

Accessories

• Water Reservoirs page 140

• Pump Chambers page 146

• Suction and Pressure Pipe Accessories page 148

• Water Distributors page 152

• Inflow and Outlet Fittings page 154

140

WATER RESERVOIRS

Stainless Steel Water Reservoirs

• Universal installation

• In different sizes

• For standard door openings

• Extremely corrosion resistant

OASE water reservoirs made ofstainless steel are indispensablewhen the overall water volumeinside the main water displaybody is insufficient. They are fastmounted in a garage or base-ment and the technical equip-ment for supply and disposal canremain adequately invisible.

OASE water reservoirs made ofstainless steel are equipped withall necessary inlet and outletconnections and can be arran-ged tailor-made on clientsrequest.

OASE offers also compact unitsincluding pump, control panel,automatic water top-up and all in-and outlet connections.

In this case only inlet and outletpipes have to be connected. Thepump can be either submersibleor a dry-sited centrifugal unitinstalled on a console. The bigsize dome opening (manhole)with cover, allows the installationof a dirt filter screen.

141

Techn. Data WR 650 E WR 1000 E WR 2000 E

Usable water volume 650 liters 1000 liters 2000 litersMaterial stainless steel stainless steel stainless steel Weight 170,00 kg 220,00 kg 245,00 kgArt.-No. 830-001 830-011 830-021Id.-No. 52077 52085 52093

Pump console KON 2000 E KON 2000 E KON 2000 EArt.-Nr. 830-014 830-014 830-014Id.-Nr. 52086 52086 52086

Strainer SFS 650 E SFS 1000 E SFS 2000 EArt.-Nr. 830-002 830-012 830-022

1 Dirt filter screen2 Handle for cover3 Drain sump4 Drain5 Suction port (optional)6 Return 7 Fresh water top-up8 for optional use9 Delivery pipe port


142

WATER RESERVOIRS

Plastic Water Reservoirs


• In different sizes

• For standard door openings

• Low weight

• Available at short term

The OASE water reservoirs,made of plastics, are a competiti-ve alternative to the stainless steelversion.

They are characterized by theirlow weight. The transparency ofplastics makes it easy to provethe water level.

OASE water reservoirs made ofplastics, are equipped with allnecessary inlet and outlet connec-tions, which can be taylor-madeon clients request. A large-sizedome opening (manhole) makesaccess to the inside of the waterreservoir easy and allows instal-lation of a large-size filter basket.


Techn. Data WR 900 K WR 1500 K WR 1900 K

Water volume 900 liters 1500 liters 1900 litersMaterial polyethylene polyethylene polyethyleneWeight 53,00 kg 75,00 kg 90,00 kgArt.-No. 830-100 830-101 830-102Id.-No. 54853 54852 54851

Pump console KON 2000 E KON 2000 E KON 2000 EArt.-No. 830-014 830-014 830-014Id.-No. 52086 52086 52086

Suction filter basket SF 1900 E SF 1900 E SF 1900 EArt.-No. 800-559 800-559 800-559Id.-No. 54361 54361 54361

1 Dome opening2 Delivery pipe3 Water level sensor4 Fresh water5 Return overflow6 Overflow7 Suction pipe8 Drain

144

WATER RESERVOIRS

Universal Underground Containers


• As a pump chamber

• As a water reservoir

• Low weight


The OASE Universal under-ground container are suitable foruse as underground pump cham-bers, as well as water reservoirs,or generally as distribution andinspection chambers.

They are completely made ofpolyethylene and have a coverlid made of 8 mm strong stainlesssteel. The strong bottom plate hasbolting holes for fixing on a con-crete base. In this way the contai-ners can be protected against upwelling in case of high groundwater level.

All necessary inlet and outletconnections are included andcan be extended or modified atadditional charge.


Technical Data UEB 370 PE UEB 700 PE UEB 1460 PE UEB 2280 PECasing: polyethylene (PE) polyethylene (PE) polyethylene (PE) polyethylene (PE)Manhole cover: high-grade steel high-grade steel high-grade steel high-grade steelReturn flow connection port: DN 100 DN 100 DN 150 DN 150Overflow connection port: DN 100 DN 100 DN 100 DN 100Freshwater connection port: 2 x G1 2 x G1 2 x G1 2 x G1Cable protection pipe port: 2 x G1 2 x G1 2 x G1 2 x G1Pressure line connection port: G2 G2 G2 G2Optonal connection port: G2 G2 G2 G2Bracket for water level sensor: 1 1 1 1Usable water volume (litre): 360 700 1460 2280Weight (kg): 80 100 180 195A 1000 1000 1250 1550B 1124 1624 1924 1924C 1024 1524 1824 1824D 950 950 1200 1500E 522 522 534 522F 210 210 210 210G 140 140 140 140H 170 170 170 170I 280 280 280 280K 590 1090 1390 1402L 535 1035 1335 1335M 825 825 825 825N 100 100 100 100O 150 150 150 150Art.-No.: 830-110 830-111 900-900 900-901Id.-No.: 54820 54821

146

PUMP CHAMBERS

Concrete Fountain Installation Chambers

• Individually custom-made

• Complete installation

• Immediate installation

The OASE fountain installationchambers are designed and builtaccording to the customers requi-rements and to the needs of thefountain system.

They are available as pump hou-sing, water reservoir or as a com-bination of both. The installationchambers are constructed ofwater-tight, reinforced concrete atfactory and are painted from out-side with a water-proofing coa-ting and inside with a white paint.Water reservoirs are treated witha sealing compound as well. Manholes are supplied with coversaccording to DIN standards tocomplete the overall outsideappearance. The installationchambers are supplied with allnecessary wall transitions.

If required, the chambers areavailable with factory-fitted pumptechnology, electrical equipmentand also with accessories.


BASIN FLOOR AND BASIN WALL INLETS

BWD 10-175 E - BWD/F 40-175 E

• With terminal hole for potential equalisation

• Extremely corrosion-resistant high-grade steel

OASE basin floor and basin wallinlets are for the watertight pas-sage of suction and pressurepipes through basin floors andbasin walls made of waterproofconcrete. For basins with lining,the fittings are available withadditional liner flange. Instead ofany projecting threaded bolts,these fittings are manufacturedwith threaded pocket holes.

148

Installation options:

OASE basin floor inlet without liner sealing

OASE basin floor inlet with liner sealing

OASE basin wall inlet without liner sealing

OASE basin wall inlet with liner sealing

BWD 10-175 E BWD/F 10-175 Ewith liner sealing flange

BWD 15-175 E BWD/F 15-175 Ewith liner sealing flange


BWD 10-175 E 15-175 E 20-175 E 25-175 E 30-175 E 40-175 E

Thread G1 G1 1/2 G2 G2 1/2 G3 G4Material stainless steel stainless steel stainless steel stainless steel stainless steel stainless steel Weight 0,65 kg 1,10 kg 2,00 kg 1,60 kg 2,95 kg 3,60 kgArt.-No. 807-525 807-526 807-527 807-528 807-529 807-530Id.-No. 51141 51142 51143 51144 52789 52790

BWD/F 10-175 E 15-175 E 20-175 E 25-175 E 30-175 E 40-175 E

Thread G1 G1 1/2 G2 G2 1/2 G3 G4Material stainless steel stainless steel stainless steel stainless steel stainless steel stainless steel Weight 2,95 kg 3,40 kg 4,65 kg 4,28 kg 7,85 kg 8,25 kgArt.-No. 807-535 807-536 807-537 807-538 807-529 807-530Id.-No. 51145 51146 51147 51148 53012 53013

BWD/F 20-175 E BWD/F 20-175 Ewith liner sealing flange




150

SUCTION STRAINER BASKETS

SF 200/15 E - SF 600/530/250 E

• Large filter surface

• Simple mounting

• Solid and robust construction


OASE suction strainer basketsare generally mounted on theintakes of the suction pipes andin this way prevent that largerimpurities enter the pump-jet cir-culation system. In order to achie-ve relatively long intervals bet-ween cleaning, the suction strai-ner baskets must have sufficientlylarge filter surfaces. This is why,for medium and large suctionstrainer baskets, the filter screenshave been folded several times.The filter screen is made of high-grade steel with 4 mm holes. Thesmaller suction strainer basketsare screwed directly onto thepipe transition for the suctionpipe on the basin floor. The medi-um and large size baskets simplyare slipped on top of the suctionpipe, jutting in 50 mm approxout of the basin floor, finally theyare bolted on.

Recommended application range for suction strainers.


Techn. Data SF 200/100/15 E SF 200/166/20 E SF 200/250/25 E

DN G 1 1/2 G2 G2 1/2Surface area 0,08 m2 0,12 m2 0,18 m2

Material stainless steel stainless steel stainless steelWeight 1,10 kg 1,50 kg 1,80 kgArt.-No. 800-560 800-561 800-562Id.-No. 51082 51083 51084

Techn. Data SF 350/185/80/100 E SF 350/350/125 E SF 600/280/150/200 E SF 600/530/250 E

DN 80/100 125 150/200 250Surface area 0,44 m2 0,88 m2 1,50 m2 3,00 m2Material stainless steel stainless steel stainless steel stainless steelWeight 9,50 kg 11,50 kg 43,10 kg 49,5 kgArt.-No. 800-565 800-567 800-568 800-570Id.-No. 51753 54755 51756 52266

152

WATER DISTRIBUTORS


• Solid construction

OASE water distributors serve tosplit main flows into a certainnumber of secondary flows.

Universal water distributors canbe used as distributors on sub-mersible pumps, or as pool waterdistributors with an inlet connec-tion and several outlets for thesupply of fountain nozzles. Theyare made of cast tombak, and ontop, they have got a screw-ontype lid.

Universal water distributors are available in standard sizes;special sizes and versions ofconnections are possible to bemade according to customers'requirements.

The pump water distributors aremade of pickled stainless steeland are directly mounted on thedry installed pump. They are

Universal Distributors

available in standard sizes andaccording to customers' require-ments.

Universal distributor (UW)Material: tombak

Pump water distributor (PW)Material: stainless steel

Type Art. - No. DNe z1 DNa z2 Da h1 h2 Material Weight

UW 170/1E25/3A10T 822-050 G21/2 1 G1 3 170 115 53 tombak 4,50 kgUW170/1E25/3A15T 822-051 G21/2 1 G11/2 3 170 115 53 tombak 4,50 kgUW170/1E25/3A20T 822-052 G21/2 1 G2 3 170 115 53 tombak 4,50 kg

UW270/1E15/12A5T 822-053 G11/2 1 G1/2 12 270 90 41 tombak 9,00 kgUW270/1E25/24A5T 822-054 G21/2 1 G1/2 24 270 90 41 tombak 9,00 kg

UW270/1E15/3A10T 822-055 G11/2 1 G1 3 270 90 41 tombak 9,00 kgUW270/1E20/4A10T 822-056 G2 1 G1 4 270 90 41 tombak 9,00 kgUW270/1E25/6A10T 822-057 G21/2 1 G1 6 270 90 41 tombak 9,00 kgUW270/1E100/12A10T 822-058 DN100 1 G1 12 270 115 53 tombak 9,00 kg

UW270/1E25/3A15T 822-059 G21/2 1 G11/2 3 270 90 41 tombak 9,00 kgUW270/1E80/4A15T 822-060 DN80 1 G11/2 4 270 115 53 tombak 9,00 kgUW270/1E100/6A15T 822-061 DN100 1 G11/2 6 270 115 53 tombak 9,00 kgUW270/1E125/12A15T 822-062 DN125 1 G11/2 12 270 115 53 tombak 9,00 kg

UW270/1E80/3A20T 822-063 DN80 1 G2 3 270 115 53 tombak 9,00 kgUW270/1E100/4A20T 822-064 DN100 1 G2 4 270 115 53 tombak 9,00 kgUW270/1E125/6A20T 822-065 DN125 1 G2 6 270 115 53 tombak 9,00 kg

Type Art.-No. DNe z1 DNa z2 Da l x1 x2 x3 x4 Material Weight

PW1E15/2A10E 822-000 G11/2 1 G1 2 60 190 120 35 50 40 stainless steel 1,35 kgPW1E20/2A15E 822-001 D2 1 G11/2 2 76 240 150 45 50 50 stainless steel 1,55 kgPW1E25/2A20E 822-002 G21/2 1 G2 2 89 260 160 50 60 50 stainless steel 2,90 kgPW1E80/2A25E 822-003 DN80 1 G21/2 2 114 340 220 60 90 60 stainless steel 5,75 kg

PW1E15/3A10E 822-004 G11/2 1 G1 3 60 310 120 35 50 40 stainless steel 1,95 kgPW1E25/3A15E 822-005 G21/2 1 G11/2 3 89 390 150 45 60 50 stainless steel 3,16 kgPW1E80/3A20E 822-006 DN80 1 G2 3 114 420 160 50 90 50 stainless steel 6,90 kgPW1E100/3A25E 822-007 DN100 1 G21/2 3 140 560 220 60 100 60 stainless steel 8,90 kg

PW1E20/4A10E 822-008 G2 1 G1 4 89 430 120 35 50 40 stainless steel 3,65 kgPW1E80/4A15E 822-009 DN80 1 G11/2 4 114 540 150 45 90 50 stainless steel 7,05kgPW1E100/4A20E 822,010 DN100 1 G2 4 140 580 160 50 100 50 stainless steel 10,35kgPW1E125/4A25E 822-011 DN125 1 G21/2 4 168 780 220 60 110 60 stainless steel 12,90 kg

PW1E20/5A10E 822-012 G2 1 G1 5 89 550 120 35 50 40 stainless steel 4,50 kgPW1E100/5A15E 822-013 DN100 1 G11/2 5 140 690 150 45 90 50 stainless steel 10,00 kgPW1E125/5A20E 822-014 DN125 1 G2 5 168 740 160 50 110 50 stainless steel 14,70 kgPW1E150/5A25E 822-015 DN150 1 G21/2 5 219 1000 220 60 120 60 stainless steel 19,50 kg

PW1E25/6A10E 822-016 G21/2 1 G1 6 114 670 120 35 60 40 stainless steel 6,70 kgPW1E100/6A15E 822-017 DN100 1 G11/2 6 140 840 150 45 100 50 stainless steel 11,40 kgPW1E125/6A20E 822-018 DN125 1 G2 6 168 900 160 50 110 50 stainless steel 16,90 kgPW1E150/6A25E 822-019 DN150 1 G21/2 6 219 1220 220 60 120 60 stainless steel 22,30 kg


154

INFLOW AND OUTLET F ITT INGS

Freshwater Supply Fittings

• Adjustable to the basin depth

• Base unit for the basin made of high-grade steel

• Brass feed pipe, tombak inflow fitting

The OASE freshwater supply fit-tings fill the basin and replenishevaporated water with waterfrom the water main. The lengthof the fittings can be adjustedfrom 0 to 1000 mm. The fittingscan either be free mounted or built into the sides of the basin.The mounting must be carried out according to DIN 1988 (theequivalent national regulationapplies). The distance betweenthe inflow edge and highestwater level must be twice the sizeof the inflow diameter and a mini-mum of 20 mm. An electronicwater level control unit can beprovided for automatic filling andreplenishment. The base of thefittings have concrete gasketsand can simply be cemented intogether with the joining pipe.For connecting for potentialequalisation special terminalholes are provided. For the flanging of sealing liners an alternative version marked „F“ isavailable.


Techn. Data FE 10/1040 T FE 10/1040 Twithout liner sealing flange with liner sealing flange

DN G 1 G 1Material tombak tombakWeight 2,25 kg 2,25 kgCorresponding floor inlet BWD 10-175 E BWD/F 10-175 EMaterial stainless steel stainless steelWeight 0,65 kg 2,95 kgArt.-No. 809-001 + 807-525 809-001 + 807-535Id.-No. 55840 + 51141 55840 + 51145

Fitting with liner sealing flange Fitting without liner sealing flange

156

OUTLET F ITT INGS

Base Outlets

• Easy draining of the basin

• Components made of corrosion resistant tombak alloy

• Easy to install

OASE base outlets with plug andOASE base outlets with dirt scre-en are suited for draining concre-te and liner coated water basins.In order to drain basins fitted withbase outlets with plug, only theplug has to be removed. For drai-ning basins fitted with base out-lets having a dirt screen, a speci-al gate valve for in-ground instal-lation is required. To avoid clog-ging, for outlets with plug, a dirtscreen can be ordered and fitted.The bottoms of the overflow outletfittings have got puddle flangeand can simply be pushed intothe sleeve of the drain pipe andcemented in. For connecting forpotential equalisation, specialterminal holes are provided. Forthe flanging of sealing liners thecorresponding liner flanges canbe ordered. The liner sealingflanges are suitable for standardpool liner with and without fibrereinforcement and up to a maxi-mum thickness of 2,5 mm. Theyare not suitable for the flangingof water proof sheeting accor-ding to DIN 18195.


Techn. Data BA 70 T BA 100 T BAS 70 T BAS 100 T???????? 70 / G2 DN 100 70 / G2 DN 100Material tombak tombak tombak tombakWeight 2,60 kg 4,50 kg 2,75 kg 4,40 kgArt.-No. 803-561 804-561 806-530 806-531Id.-No. 51107 51116 51121 51122

Techn. Daten FK 70 FK 100 WS 70 T WS 100 Tliner sealing flange liner sealing flange winter dirt screen winter dirt screen

DN 70 100 70 100Material tombak tombak tombak tombakWeight 0,90 kg 1,10 kg 0,80 kg 1,40 kgArt.-No. 803-575 804-575 803-562 804-562Id.-No. 51108 51117 51973 51974

157

BA 70 T BA 100 T BAS 70 T BAS 100 T

158

OVERFLOW OUTLET F ITT INGS

UA 70/1000 T and UA 100/1000 T

The liner sealing flanges are suitable for standard pool linerwith and without fibre reinforce-ment and up to a maximumthickness of 2,5 mm. They are not suitable for the flanging ofwater proof sheeting accordingto DIN 18195.

• Easy to install

• Adjustable height

• Standpipe made of stainless steel

• Components made of corrosion resistant tombak alloy

The OASE overflow outlet fittingsprovide an ideal combination ofoverflow and outlet. When theover-flow pipe is plugged in, theexcess basin water (rain water) isled to the drain, and when it isunplugged, the basin will be drai-ned. The overflow outlet fittingscan be ordered in a standardlength of 1000 mm. In order toadjust to a particular water level,the overflow pipe can be shorte-ned to the right length. To avoidclogging, a coverscreen can beordered and fitted.The bottoms of theoverflow outlet fittingshave got puddle flangeand can simply be pus-hed into the sleeve of thedrain pipe and cementedin. For connecting forpotential equalisation,special terminal holesare provided. For theflanging of sealing linersthe corresponding linerflanges can be ordered.


Techn. Data UA 70/1000 T UA 100/1000 T

???????? 70 / G2 DN 100Material tombak tombakWeight 5,20 kg 9,40 kgArt.-No. 803-553 804-503Id.-No. 51106 51112

Techn. Data FK 70 T FK 100 T WS 70 T WS 100 Tliner sealing flange liner sealing flange winter dirt screen winter dirt screen

DN 70 100 70 100Material tombak tombak stainless steel stainless steelWeight 0,90 kg 1,10 kg 0,80 kg 1,40 kgArt.-No. 803-575 804-575 803-562 804-562Id.-No. 51108 51117 51973 51974

UA 70/1000 T UA 100/1000 T FK 70 T FK 100 T

WS 70 E WS 100 E

160

RETURN FLOW F ITT INGS

RBA 200/100 T, RA 200/100 T, RA 250/150 T

in systems without controlledwater level, the standard returnflow fittings RA 200/100 T andRA 250/150 T, are simply pus-hed into the sleeve of the outletpipe and cemented in.

flanges are suitable for standardpool liner with and without fibrereinforcement and up to a maxi-mum thickness of 2,5 mm. Theyare not suitable for the flangingof water proof sheeting accor-ding to DIN 18195.

When used in systems wherewater level has to be kept con-stant, the fittings are simply pus-hed onto the slightly chamferedpipes. The built-in O-ring ensuresan impeccable seal. When used

• Large, effective dirt screen


• Easy to install

• Made of corrosion resistant tombak alloy

The OASE return flow outlet fit-tings allow the water that hasbeen pumped into the basin, toflow back into a water reservoir.The size and quantity of such fit-tings depend on the volume ofwater to be returned. However,for safety reasons, at least twounits should be provided.

When calculating the nominalwidth of the return flow pipe, thisshould be done on the basis of amaximum return flow speed of0,6 m/sec. To adjust to a specificheight of water, the standpipe ofthe return flow outlet fitting (RBA200/100 T) can be shortened.To avoid clogging, a cover scre-en can be ordered and fitted. Thebottoms of the return flow outletfittings have got puddle flangeand can simply be pushed intothe sleeve of the drain pipe andcemented in. For connecting forpotential equalisation, specialterminal holes are provided. Forthe flanging of sealing liners thecorresponding liner flanges canbe ordered. The liner sealing

RA 200/100 Twithout water level regulation

RBA 200/100 Twith water level regulation

RA 250/150 Twithout water level regulation


Techn. Data RBA 200/100 T RA 200/100 T RA 250/150 T

DN 100 100 150Material tombak tombak tombakWeight 16,00 kg 8,45 kg 11,45 kgArt.-No. 806-542 806-540 806-541Id.-No. 53420 51123 51124

Techn. Data FK 100 T WS 100 Tliner sealing flange winter dirt screen

DN 100 100Material tombak tombakWeight 1,10 kg 1,40 kgArt.-No. 804-575 804-562Id.-No. 51117 51974

RA 250/150 Twith water level regulation

162

OVERFLOW-RETURN FLOW F ITT INGS

URK 100 E, URK/F 100 E

• For installing into upright basin walls

• Large, effective dirt filter

• Connection fits the sleeves of the outlet pipes

• Made entirely from high-grade rust-proof steel

The OASE return flow outlet fit-tings allow the water that hasbeen pumped into the basin, toflow back into a water reservoir,or to lead the excess basin water(rain) into the drain channel. Thesize and quantity of such fittingsdepend on the volume of water tobe returned However, for safetyreasons, at least two units shouldbe provided.

When calculating the nominalwidth of the return flow pipe, thisshould be done on the basis of amaximum return flow speed of0,6 m/sec.

When used as a return flow fit-ting, for safety reasons at leasttwo fittings should be installed.The pipe connections sockets, aresimply pushed into the sleeve ofthe drainage pipes.

URK Overflow - return flow fittingwithout sealing flange

URK Overflow - return flow fittingwith sealing flange


Techn. Data URK 100 E URK/F 100 E

DN 100 100Material stainless steel stainless steelWeight 6,00 kg 13,10 kgArt.-No. 806-520 806-521Id.-No. 52602 53421

URK 100 E URK/F 100 E

164

INFLOW AND OVERFLOW F ITT INGS

Combined Overflow Wall Fittings

• Elegant solution for freshwater filling and basin overflow

• Possibility for built-in water level sensor

• Water level later adjustable to plus/minus 20 mm

• Made entirely from high-grade steel

OASE combined overflow wallfittings offer three functions intoone single unit. This means, theinitial filling and replenishing ofthe basin, discharging overflowwater into the drain and control-ling of water level by means ofan optionally fitted water levelsensor. The fittings are usuallymounted into the side wall of thebasin below the edge cover. Theinstallation is easily to be done,the overflow connection port fitsinto the standard sleeve of adrain pipe. The connection of thefreshwater supply and of thecable protection pipes for thewater level sensor is achievedusing PE- pipe couplings and cor-responding threaded nipples. Toadjust to the water level the over-flow inlet funnel can be moved by20 mm up or down.


Techn. Data UWK 100 E UWK/F 100 E

DN 100 / G 1 100 / G 1Material stainless steel stainless steelWeight 6,10 kg 13,10 kgArt.-No. 806-507 806-508Id.-No. 51120 51767

UWK 100 E UWK/F 100 E

166

6036

4/08

B

OASE GmbHPostbox 2069D-48469 HörstelTel.: +49 (0 54 54) 80-0Fax: +49 (0 54 54) 80-92 70E-Mail: [email protected]: www.oase-pumpen.com

Fountain units Nozzles Nozzles Light Power Filtration Accessories

Documents

Fountain Catalogue