Four-leaf clover

Origami technique

made by Mădălina Ana-Maria Ţuţui and Gabriela Ivan

First bending of paper

1 2

3 4

5 6

• you need a square piece of paper

• It may be green for a clover or another colour for a flower

• bent paper on both diagonals

• then united two by two opposite corners and bend the paper in the middle as in figures 5 and 6

Basic form

7 8

9 10

11 12

•bent paper on one diagonal (fig. 7)•open right half of the paper and insert inside right corner (fig. 8)

•thus forms two wings which we press one over the other on right side (fig. 9, 10)

•repeat the same with the left half of figure (fig. 11, 12)

The clover• Figure 13 is one of the

basic forms of origami technique

• Take turns a right wing and a left wing and bending them to the middle line where they will meet their peaks (fig. 14, 15, 16)

• repeat on the other side of the figure (17, 18)

13 14

15 16

17 18

• you will get a shape as in fig.19

• lower edges of right and left of the front side are bend to the vertical midline of the shape (fig. 21, 22, 23, 24)

• repeat on the other side of the figure (fig. 25, 26, 27)

19

23

21

22

2726

2524

• draw two arcs as in fig. 28, 29

• cut these arcs form

• draw a line helper like in fig. 33

• bend and unbend the paper form (fig. 34, 35)

3534

3332

3130

2928

Finished my work

Open the top of the figure obtained

2020

2020

Four-leaf clover is ready!

I made more four-leaf clover!

Here, I have one large and one small clover ...

Hello, I'm Valy! I will show to you what to do with our four-leaf

Clovers.

Clovers are inserted in each other as in photo. If you use colored paper, you

will get an interesting flower.

And if you made another smaller one… your flower can be perfect!

Hello, everyone!

• We are Tony and Roby!

• We like to work Origami shapes

• Flowers and animals are our preferred Origami shapes