Embed Size (px)
Citation preview
FRP Cartridge Filter Housings
ENCELADUS CARTRIDGE FILTER HOUSINGS:
ENCELADUS ECH & SERIES HOUSING ARE SIDE PORTED CARTRIDGE FILTER HOUSINGS,
CONSTRUCTED FROM FIBERGLASS RIENFORCED PLASTIC (FRP) AND FINSISHED WITH A
HIGH GLOSS POLYURETHANE PAINT FINISH. (CUSTOM COLORS AVAILABLE).
FLOW RATES RANGING FROM 50 GPM– 4,200GPM
ACCOMMODATES STANDARD 2.5” & HIGH FLOW 6” CARTRIDGE FILTERS
HORIZINTAL AND VERTICAL MOUNTING OPTIONS
FRP BODY CONTRUCTION
HIGHER TENSILE STRENGTH AND BROADER CHEMICAL RESISTANCE THAN
STAINLESS STEEL
NO WETTED STEEL PARTS
NO WETTED STEEL PARTS RESULTS IN LONGER VESSEL LIFE, ESPECIALLY
IMPORTANT FOR DESALINATION AND OTHER HIGH CORROSION
OPERATING ENVIRONMENTS
EASIER HANDLING
ENCELADUS FRP HOUSING ARE WEIGHT LESS THAN HALF AS MUCH AS
THEIR STAINLESS STEEL EQUIVALENTS, AND NO SPECIAL TOOLS ARE
REQUIRED
SEPARATE TOP/BOTTOM CLOSURE SYSTEM –THIS EQUALS FASTER
CARTRIDGE ACCESS AND CHANGE-OUTS.
DESIGNED AND MANUFACTURED IN ACCORDANCE WITH (CLASS 1)
ISO 9001 CERTIFIED
NSF 61 CERTIFIED
FEATURES
www.Enceladuswater.com
For Sales and Pricing Information
Please Contact
FRP Enceladus Cartridge Filter Housings—Sizing and Selection Guide
Model Number Flow (GPM) Cartridge
Diameter
Cartridge
Length
# of
Cartridges
Standard Inlet/
Outlet Size Weight Height
ECH: Standard Cartridge Filter Housings
ECH-5-20 50 GPM 2.5" 20" 5 2" IPS Grooved 46lb 34.5"
ECH-5-30 75 GPM 2.5" 30" 5 2" IPS Grooved 50lb 44.5"
ECH-5-40 100 GPM 2.5" 40" 5 2"IPS Grooved 55lb 54.5"
ECH-12-20 120 GPM 2.5" 20" 12 3"IPS Grooved 147lb 38.8"
ECH-12-30 180 GPM 2.5" 30" 12 3"IPS Grooved 156lb 48.8"
ECH-12-40 240 GPM 2.5" 40" 12 3"IPS Grooved 165lb 58.8"
ECH-22-20 220 GPM 2.5" 20" 22 4"IPS Grooved 274lb 44.3"
ECH-22-30 330 GPM 2.5" 30" 22 4"IPS Grooved 288lb 54.3"
ECH-22-40 440 GPM 2.5" 40" 22 4"IPS Grooved 304lb 64.3"
ECH-60-30 900 GPM 2.5" 30" 60 6"IPS Grooved 598lb 57.0”
ECH-60-40 1200 GPM 2.5" 40" 60 6"IPS Grooved 619lb 67.0"
ECH-60-50 1500 GPM 2.5" 50" 60 6"IPS Grooved 645lb 77.0"
ECH-60-60 1800 GPM 2.5" 60" 60 6"IPS Grooved 672lb 87.0"
ECH-60-70 2100 GPM 2.5" 70" 60 6"IPS Grooved 698lb 97.0"
ECH-84-40 1680 2.5" 40" 84 8” IPS Grooved 865lb 69.9”
ECH-84-50 2100 2.5" 50" 84 8” IPS Grooved 905lb 79.9”
ECH-84-60 2520 2.5" 60" 84 8” IPS Grooved 940lb 89.9”
ECH-84-70 2940 2.5" 70" 84 8” IPS Grooved 976lb 99.9”
ECH-120-40 2400 2.5" 40" 120 8” IPS Grooved 1235lb 72.5”
ECH-120-50 3000 2.5" 50" 120 8” IPS Grooved 1290lb 82.5”
ECH-120-60 3600 2.5" 60" 120 8” IPS Grooved 1345lb 92.5”
ECH-120-70 4200 2.5" 70" 120 8” IPS Grooved 1392lb 102.5”
ECH: High Flow Cartridge Filter Housings
ECH-HF-1-40 100 GPM 6" 40" 1 2.5” IPS Grooved 55lb 54.5”
ECH-HF-4-40 400 GPM 6" 40" 4 4” IPS Grooved 304lb 64.3”
ECH-HF-9-40 900 GPM 6" 40" 9 6” IPS Grooved 620lb 67.o”
Enceladus CF Housings
ECH-#-#.#-##-###-#XX-### -XX-XXX
ECH - - - - - - - -
Standard
Number
of
Elements
Cartridge
Diameter
Cartridge
Length
Cartridge
Type
In/Outlet
Size
In/Outlet
Type
O-Ring
Material
Design
Pressure
End Cap
Removal
Mounting
Options
ECH
5 2.5" 20" DOE 2" V=IPS
Groove
E=EPDM
150PSI/ 10
Bar
HRT=Head
removal
tool
HL=Horizo
ntal
12 2.75" 30" 226 3" V=Viton
250PSI/ 17
Bar
DAV=Davi
t Arm VL=Vertical
22 40" 222 4"
60 50" 6"
84 60"
120 70"
Enceldaus HIGH FLOW CF Housings ECH-#-#.#-##-###-#XX-### -XX-XXX
ECH-HF - - - - - - - - - -
High
Flow
Number
of
Elements
Cartridge
Diameter
Cartridge
Length
Cartridge
Type
In/Outlet
Size
In/Outlet
Type
O-Ring
Material
Design
Pressure
Mounting
Options
End Cap
Removal
ECH-HF
1 6” 40” 2.5” V=IPS
Groove
E=EPDM
150PSI/ 10
Bar
HL=Horizo
ntal
HRT=Head
Removal
Tool
4 4” V=Viton
250PSI/ 17
Bar VL=Vertical
DAV=Davi
t Arm
10 6”
FRP Enceladus Cartridge Filter Housings—Ordering Guide
Model Number
Flow (GPM)*
Cartridge Diameter
Cartridge Length
# of Cartridges
ECH-5-20 50 GPM 2.5" 20" 5
ECH-5-30 75 GPM 2.5" 30" 5
ECH-5-40 100 GPM 2.5" 40" 5
ECH-5 Series Flow Rates
ECH 5 Series FRP Cartridge Filter Housing
ECH Series Features
FLOW RATES RANGING FROM:
50 GPM– 4,200 GPM
ISO 9001 Certified
NSF 61 Certified
ASME SECTION 10 STANDARDS
Designed and manufactured in accordance with (Class 1)
FRP BODY CONTRUCTION
Higher tensile strength and broader chemical resistance
than stainless steel
NO WETTED STEEL PARTS
No wetted steel parts results in longer vessel life, especial-
ly important for desalination and other high corrosion
operating environments
EASIER HANDLING
Enceladus FRP housing weight less than half as much as
their stainless steel equivalents, and no special tools are
required
Separate top/bottom closure system –this equals faster
cartridge access and change-outs.
HORIZONTAL & VERTICAL MOUNTING
OPTIONS
Why FRP and not Stainless Steel?
Salt water and even Brackish water can be highly corro-
sive,. Stainless steel housing and internal wetted parts
will corrode quickly with time and this will result in a
significant increase in maintenance cost and ultimately
failure. Fiber-glass Reinforced Plastic (FRP) will not
rust or corrode like stainless steel and gives an excep-
tionally long service life.
In addition, Enceladus’ FRP housings are 3 to 5 times
stronger than their stainless steel equivalents, and
weigh in at half the weight. Reduced weight means eas-
ier handling and lower shipping costs.
WHY Enceladus?
Enceladus’ ECH housings focus is creating durabile,
reliable and well engineered FRP housing. Our ECH
series offers our customers a lower $ per GPM cost
than any competing cartridge housing in the market.
ECH Series Overview
Enceladus ECH Series housing are side ported
cartridge filter housings, constructed from Fiberglass
Reinforced Plastic (FRP) and finished with a high gloss
polyurethane paint finish. (Custom mounting options,
colors and port configurations available)
Model Number
Flow (GPM)*
Cartridge Diameter
Cartridge Length
# of Cartridges
ECH-12-20 120 GPM 2.5" 20" 12
ECH-12-30 180 GPM 2.5" 30" 12
ECH-12-40 240 GPM 2.5" 40" 12
ECH-12 Series Flow Rates
ECH Series Features
FLOW RATES RANGING FROM:
50 GPM– 4,200 GPM
ISO 9001 Certified
NSF 61 Certified
ASME SECTION 10 STANDARDS
Designed and manufactured in accordance with (Class 1)
FRP BODY CONTRUCTION
Higher tensile strength and broader chemical resistance
than stainless steel
NO WETTED STEEL PARTS
No wetted steel parts results in longer vessel life, especial-
ly important for desalination and other high corrosion
operating environments
EASIER HANDLING
Enceladus FRP housing weight less than half as much as
their stainless steel equivalents, and no special tools are
required
Separate top/bottom closure system –this equals faster
cartridge access and change-outs.
HORIZONTAL & VERTICAL MOUNTING
OPTIONS
Why FRP and not Stainless Steel?
Salt water and even Brackish water can be highly corro-
sive,. Stainless steel housing and internal wetted parts
will corrode quickly with time and this will result in a
significant increase in maintenance cost and ultimately
failure. Fiber-glass Reinforced Plastic (FRP) will not
rust or corrode like stainless steel and gives an excep-
tionally long service life.
In addition, Enceladus’ FRP housings are 3 to 5 times
stronger than their stainless steel equivilants, and
weigh in at half the weight. Reduced weight means eas-
ier handling and lower shipping costs.
WHY Enceladus?
Enceladus’ ECH housings focus is creating durabile,
reliable and well engineered FRP housing. Our ECH
series offers our customers a lower $ per GPM cost
than any competing cartridge housing in the market.
ECH Series Overview
Enceladus ECH Series housing are side ported
cartridge filter housings, constructed from Fiberglass
Reinforced Plastic (FRP) and finished with a high gloss
polyurethane paint finish. (Custom mounting options,
colors and port configurations available)
ECH 12 Series FRP Cartridge Filter Housing
Model Number
Flow (GPM)*
Cartridge Diameter
Cartridge Length
# of Cartridges
ECH-22-20 220GPM 2.5" 20" 22
ECH-22-30 330 GPM 2.5" 30" 22
ECH-22-40 440 GPM 2.5" 40" 22
ECH-22 Series Flow Rates
ECH Series Features
FLOW RATES RANGING FROM:
50 GPM– 4,200 GPM
ISO 9001 Certified
NSF 61 Certified
ASME SECTION 10 STANDARDS
Designed and manufactured in accordance with (Class 1)
FRP BODY CONTRUCTION
Higher tensile strength and broader chemical resistance
than stainless steel
NO WETTED STEEL PARTS
No wetted steel parts results in longer vessel life, especial-
ly important for desalination and other high corrosion
operating environments
EASIER HANDLING
Enceladus FRP housing weight less than half as much as
their stainless steel equivalents, and no special tools are
required
Separate top/bottom closure system –this equals faster
cartridge access and change-outs.
HORIZONTAL & VERTICAL MOUNTING
OPTIONS
Why FRP and not Stainless Steel?
Salt water and even Brackish water can be highly corro-
sive,. Stainless steel housing and internal wetted parts
will corrode quickly with time and this will result in a
significant increase in maintenance cost and ultimately
failure. Fiber-glass Reinforced Plastic (FRP) will not
rust or corrode like stainless steel and gives an excep-
tionally long service life.
In addition, Enceladus’ FRP housings are 3 to 5 times
stronger than their stainless steel equivalents, and
weigh in at half the weight. Reduced weight means eas-
ier handling and lower shipping costs.
WHY Enceladus?
Enceladus’ ECH housings focus is creating durabile,
reliable and well engineered FRP housing. Our ECH
series offers our customers a lower $ per GPM cost
than any competing cartridge housing in the market.
ECH Series Overview
Enceladus ECH Series housing are side ported
cartridge filter housings, constructed from Fiberglass
Reinforced Plastic (FRP) and finished with a high gloss
polyurethane paint finish. (Custom mounting options,
colors and port configurations available)
ECH 22 Series FRP Cartridge Filter Housing
Model Number
Flow (GPM)*
Cartridge Diameter
Cartridge Length
# of Cartridges
ECH-60-30 900 GPM 2.5" 30” 60
ECH-60-40 1,200 GPM 2.5" 40” 60
ECH-60-50 1,500 GPM 2.5” 50” 60
ECH-60-60 1800 GPM 2.5” 60” 60
ECH-60-70 2,100 GPM 2.5" 70” 60
ECH-60 Series Flow Rates
ECH Series Features
FLOW RATES RANGING FROM:
50 GPM– 4,200 GPM
ISO 9001 Certified
NSF 61 Certified
ASME SECTION 10 STANDARDS
Designed and manufactured in accordance with (Class 1)
FRP BODY CONTRUCTION
Higher tensile strength and broader chemical resistance
than stainless steel
NO WETTED STEEL PARTS
No wetted steel parts results in longer vessel life, especial-
ly important for desalination and other high corrosion
operating environments
EASIER HANDLING
Enceladus FRP housing weight less than half as much as
their stainless steel equivalents, and no special tools are
required
Separate top/bottom closure system –this equals faster
cartridge access and change-outs.
HORIZONTAL & VERTICAL MOUNTING
OPTIONS
Why FRP and not Stainless Steel?
Salt water and even Brackish water can be highly corro-
sive,. Stainless steel housing and internal wetted parts
will corrode quickly with time and this will result in a
significant increase in maintenance cost and ultimately
failure. Fiber-glass Reinforced Plastic (FRP) will not
rust or corrode like stainless steel and gives an excep-
tionally long service life.
In addition, Enceladus’ FRP housings are 3 to 5 times
stronger than their stainless steel equivalents, and
weigh in at half the weight. Reduced weight means eas-
ier handling and lower shipping costs.
WHY Enceladus?
Enceladus’ ECH housings focus is creating durabile,
reliable and well engineered FRP housing. Our ECH
series offers our customers a lower $ per GPM cost
than any competing cartridge housing in the market.
ECH Series Overview
Enceladus ECH Series housing are side ported
cartridge filter housings, constructed from Fiberglass
Reinforced Plastic (FRP) and finished with a high gloss
polyurethane paint finish. (Custom mounting options,
colors and port configurations available)
ECH 60 Series FRP Cartridge Filter Housing
Model Number
Flow (GPM)*
Cartridge Diameter
Cartridge Length
# of Car-tridges
ECH-84-40 1680 GPM 2.5" 40" 84
ECH-84-50 2100 GPM 2.5" 50" 84
ECH-84-60 2520 GPM 2.5" 60" 84
ECH-84-70 2940 GPM 2.5” 70” 84
ECH-84 Series Flow Rates
ECH Series Features
FLOW RATES RANGING FROM:
50 GPM– 4,200 GPM
ISO 9001 Certified
NSF 61 Certified
ASME SECTION 10 STANDARDS
Designed and manufactured in accordance with (Class 1)
FRP BODY CONTRUCTION
Higher tensile strength and broader chemical resistance
than stainless steel
NO WETTED STEEL PARTS
No wetted steel parts results in longer vessel life, especial-
ly important for desalination and other high corrosion
operating environments
EASIER HANDLING
Enceladus FRP housing weight less than half as much as
their stainless steel equivalents, and no special tools are
required
Separate top/bottom closure system –this equals faster
cartridge access and change-outs.
HORIZONTAL & VERTICAL MOUNTING
OPTIONS
Why FRP and not Stainless Steel?
Salt water and even Brackish water can be highly corro-
sive,. Stainless steel housing and internal wetted parts
will corrode quickly with time and this will result in a
significant increase in maintenance cost and ultimately
failure. Fiber-glass Reinforced Plastic (FRP) will not
rust or corrode like stainless steel and gives an excep-
tionally long service life.
In addition, Enceladus’ FRP housings are 3 to 5 times
stronger than their stainless steel equivalents, and
weigh in at half the weight. Reduced weight means eas-
ier handling and lower shipping costs.
WHY Enceladus?
Enceladus’ ECH housings focus is creating durabile,
reliable and well engineered FRP housing. Our ECH
series offers our customers a lower $ per GPM cost
than any competing cartridge housing in the market.
ECH Series Overview
Enceladus ECH Series housing are side ported
cartridge filter housings, constructed from Fiberglass
Reinforced Plastic (FRP) and finished with a high gloss
polyurethane paint finish. (Custom mounting options,
colors and port configurations available)
ECH 84 Series FRP Cartridge Filter Housing
ECH-120 Series Flow Rates
ECH Series Features
FLOW RATES RANGING FROM:
50 GPM– 4,200 GPM
ISO 9001 Certified
NSF 61 Certified
ASME SECTION 10 STANDARDS
Designed and manufactured in accordance with (Class 1)
FRP BODY CONTRUCTION
Higher tensile strength and broader chemical resistance
than stainless steel
NO WETTED STEEL PARTS
No wetted steel parts results in longer vessel life, especial-
ly important for desalination and other high corrosion
operating environments
EASIER HANDLING
Enceladus FRP housing weight less than half as much as
their stainless steel equivalents, and no special tools are
required
Separate top/bottom closure system –this equals faster
cartridge access and change-outs.
HORIZONTAL & VERTICAL MOUNTING
OPTIONS
Why FRP and not Stainless Steel?
Salt water and even Brackish water can be highly corro-
sive,. Stainless steel housing and internal wetted parts
will corrode quickly with time and this will result in a
significant increase in maintenance cost and ultimately
failure. Fiber-glass Reinforced Plastic (FRP) will not
rust or corrode like stainless steel and gives an excep-
tionally long service life.
In addition, Enceladus’ FRP housings are 3 to 5 times
stronger than their stainless steel equivalents, and
weigh in at half the weight. Reduced weight means eas-
ier handling and lower shipping costs.
WHY Enceladus?
Enceladus’ ECH housings focus is creating durabile,
reliable and well engineered FRP housing. Our ECH
series offers our customers a lower $ per GPM cost
than any competing cartridge housing in the market.
ECH Series Overview
Enceladus ECH Series housing are side ported
cartridge filter housings, constructed from Fiberglass
Rienforced Plastic (FRP) and finished with a high gloss
polyurethane paint finish. (Custom mounting options,
colors and port configurations available)
Model Number
Flow (GPM)*
Cartridge Diameter
Cartridge Length
# of Car-tridges
ECH-120-40 2400 GPM 2.5" 40" 84
ECH-120-50 3000 GPM 2.5" 50" 84
ECH-120-60 3600 GPM 2.5" 60" 84
ECH-120-70 4200 GPM 2.5” 70” 84
ECH 120 Series FRP Cartridge Filter Housing
www.Enceladuswater.com
10035 Pioneer Blvd.
Santa Fe Springs, CA 90670
562-942-1234
www.Enceladuswater.com
10035 Pioneer Blvd.
Santa Fe Springs, CA 90670
562-942-1234
626-644-9793
www.Enceladuswater.com
10035 Pioneer Blvd.
Santa Fe Springs, CA 90670
562-942-1234
626-644-9793
