User Manual

Galaxias Flex LED display

Specifications·······························2

Dimension····································3

Attentions·····································4

Introduction··································5

Transportation······························6

Installation···································7

Maintenance·······························10

Troubleshooting···························11

Conterts

01

02

Specifications on Galaxias Series

All dimensions are in millimeter

Model No

Pixel pitch

Density

Pixel Configuration

Brightness

View distance

Max.Power Consumption

Consumption

Module sizeW=widthH=heightT=thickness

Weight

Work Voltage

Brightness level

Bit depth per color

Bit depth per pixel

Visual Angle

Date Refresh Rate

Display mode

Drive mode

Signal type

Contol Distance

Body structure

IP

Ambient Temperature

Relative humidity

Power system

Installation

safety certificate

DC 24V

16 levels

16 bit

48 bit

Horizontal:120˚ Vertical:120˚

≥10000Hz

1280X1024

Constant current

AV,S-Video,VGA,CVBS,HDMI,DVI

HSYV; <100m

Plastic

Ip43

-20 ~ +50 °C

10% ~ 90%

Power-600, Power-1200 Power jacket

Hang

CE FCC ROHS

Average.power

Galaxias 6

RGB 3-IN-1 SMD

Galaxias 7 Galaxias 9 Galaxias 12 Galaxias 16

6.25mm 7.8125mm 9.375mm 12.5mm 16mm

27778 Dot/m² 16384 Dot/m² 11378 Dot/m² 6400 Dot/m² 3906 Dot/m²

2600 nit 2730 nit 2100 nit 1650 nit 1300 nit

4.5m 5m 7m 9m 12m

205W/m² 195W/m² 185W/m² 180W/m² 230W/m²

67W/m² 69W/m² 65W/m² 63W/m² 80W/m²

W:800mm

H:2400mm

T:25mm

W:1000mm W:600mm W:800mm W:512mm

H:2400mm H:2400mm H:3200mm H:3072mm

T:25mm T:25mm T:25mm T:25mm

11.5Kg/sq.m 11.0Kg/sq.m 10.4Kg/sq.m 9.8Kg/sq.m 9.2Kg/sq.m

03

Dimension

L

WT

Diagram1

The panel size can be customized to achieve your needs.Manufacturer disclaim

liability for any injury, damage, direct or indirect loss, consequential or economic

loss or any other loss occasioned by the use of, inability to use or reliance on the

information contained in this manual.

Attentions:

04

Please read over the attentions before installation Safety remarks

If you have questions about how to operate the panel safely, please contact your manufacturer.

Be careful from electric shock

This product use alternation power 90-260V 50/60Hz

The power shall not be linked with power before installation or maintenance

Disconnect the power after use。

The power shall measure up to the Electrical Code, and have ground-protection.

Use the appointed connectors by our company

Cables are not allowed to get wet in rain

One power socket can supply maximum 2 powers ( 2400W )

Please check rated power and all accessories to make sure safety before every use.

TECTION FROM FIRE

No cover before the screen during display

No changes on panels

Use spare parts supplied by us for exchanging accessories

No use of products above 40°C（104°F

）PROTECTION FROM INJURY

Truss behind the panels shall support 10 times of screen's weight

All connections and screws shall be fixed well before lighting up

In order to protect eyes, we should stay away 40cm from the face

And no staring at luminous point closely.

Introduction

05

The security manual means to show you how to install and repair our

Galaxias flexible panel. And it will include attentions and installation.

More questions on software please refer to Electronic part.

Attention: please read over P1-2 before installation.

Firstly, thank you for your trust on our products, the features are listed as:

1. We combine the led units into flexible led display, and can show videos

and texts,

2. Flexible in use, can be folded or curved into different shapes.

3. The panels are spliced by small modules, so it makes maintenance

much easier.

4. Lightweight: makes transportation and installation cost-saved.

5. We use led light as illuminant, about 100,000 hour lifetime. Besides, it is

also with lower power consumption and energy-efficient.

6. Lightweight, thin, and flat makes the shape more attractive.

7. The structure is easy for install and maintenance.

Unpacking

1. With 4 pcs one module (the size and quantity of package may be

fluctuated with customers' demand)

2. 2 sets of Power-1200

3. 1 set of HC-103D controller ( one pc controls one panel, and if you use

Colorlight software, sending card is not necessary.)

4. 4 pcs headers

5. 8 pcs contraction band

6. 1 pcs net cable ( 1 cable for each order)

7. Users' manual, and software specifications are also for free. Each order

with one set.

Package:

06

1 Please read over the security attentions from P4-5.

2. Please check the local voltage and ensure it conform to the range of 90-

260V 50/60Hz

3. Make sure the rated input power and current measure up to the standard.

Using for the first time

TransportationThe features of Galaxias: light, thin, small and flexible,

the units of moduels can be combined as users' wish.

The single moduel can be fold to unidirectional, it will be

more convenient for transportation and storage.

Warning! The folding pattern must be following

the sketch pictures, otherwise all the damage will be

assumed by the users

The folding pattern of Galaxias-16, Galaxias-12:

The above models can only fold forward, it is very easy to damage the screens

if folding backward.

Screen Back

Screen Back

The folding pattern of Galaxias-9, Galaxias-7, Galaxias-6:The above models can only fold backward; it is very easy to damage the screens if folding forward.

Diagram2

Diagram3

Screen Back

Screen Back

Installation

07

Warning! The appropriate facility, place, hardware,

hanging structure and electric conditions are

necessary.

Warning! The installation of this series of products must

be operated by the professionals, please consult

manufacturer if there is any question.

Warning! The default installation of the screen is girder

hanging, please consult the professionals if

using other installations.

1、 Hanging Screen

A

B

C

D

E

Steps: 1、Unfold the screen E, distinguish the direction of up an down, and hang the screen E to the A position of the girder. 2、Make the contraction band B go through the A position of the girder, and make sure the hook C locking the “D” shape buckle.

Diagram4

08

2、 Vertical combinations

Steps:

1. Loose the combination buckle of the under screen Display B and

lock the screw B.

2. Aligning the up and under screen, insert the combination buckle A

into the combination buckle B, and flattening the screen, tightening

the buckle and screw B.

3、 Horizontal combination

Steps:

1. Loose the combination buckle of the left screen Display A and

lock the screw B.

2. Aligning the left and right screen, insert the combination buckle A

into the combination buckle B, and flattening the screen,tightening

the buckle and screw B.

Diagram5

Diagram6

09

AC

Input

All the electrical connection of Galaxias are completed by connector

Diagram7

10

The electrical connection between modules.

Signal connection: connecting the male and female plugs between

two screens.

Power connection: the screen's input power plug connects the

DC output plug seat of power box, every piece of screen's power

is supplied by power box independently.

Diagram8

Diagram9

Warning! The connectors can be connect successfully only

when they are a pair, if the connector can't be insert, it

should change other connectors.

These two kinds of connectors are both low voltage, please do not connect with high voltage.

The screen and video processor are connected with net cable. There are two groups of net cables, one is for output signal, another is for input signal, the input net cable and video processor's cable are connected by contactor, output net cable is connected with the output net cable of next screen, the rest can be done by the same manner.

The connection of power, using a DC out put cable to connect the power output cable, the DC output cable has the options of 1.5 meters, 3 meters, 5 meters and 10 meters, the power box can be put under the screen when the chosen cable is more than 3 meters; the power box should be fix on the girder (or similar supporter)above the screen.

One side of the DC output cable is connected on the DC output port, another side is connected the power input cable of screen by connector.

10

Warning! The power supply must be switched on, after all the

connections are examined to make sure they are

correct.

Warning! All the operations of electrical connection must be

operated before the power supply is switched on.

Warning! The earth connection must be examined to be

qualified before the power supply is switched on.

Warning! The power supply can't be poured by rain or any

water on it.

Maintenance

Warning! The power supply must be cut off before

all the operations of maintaining.

Warning! The maintaining must be operated by

professionals.

Warning! The washing must be used by alcohol,

water is forbidden.

Troubleshooting

11

Problem Probable cause(s) Remedy

No power to panel.

Fuse blown

Defective PSU (power supply unit).

Check power and connections.

Disconnect panel from power. Contact professional person for service.

Disconnect panel from power.Contact Professional personfor service.

Panel is completely dead.

One or more panels

displays video

incorrectly or does

not display video at all.

Incorrect panel settings on control .system

Fault on line connection

Panel defective.

Other device (e.g. Ethernet switch) on line connection defective.

Check settings (display addresses, panel DeviceProperties, etc.).

Inspect connections and cables. Correct poor connections. Repair or replace damaged cables.

Have faulty panel serviced by service technician.

Replace with a device known to be operating correctly. Have faultydevice tested and serviced.

Display cuts out

intermittently.

Panel is too hot.

Fault on line connection

Device on line connection

All panels and/or

monitor screen display

video incorrectly or do

not display video at all.

Incorrect video input or panel settings on System Controller.

Unusable video signal or defective video source.

Fault on line connection.

Device on line connection

Check settings (PAL/SECAM/NTSC selection, overall panelintensity setting, etc.)

Check video source

Inspect connections and cables. Correct poor connections. Repair or replacedamaged cables.

Have faulty panel or device tested and serviced by service technician orsupplier.

Ensure free airflow around spine.Check that ambient temperature doesnot exceed max. permitted level.Contact professional person for service.

Inspect connections and cables.Correct poor connections. Repairor replace damaged cables.

Have faulty panel or device tested and serviced by service technician or supplier.

Check module.Replace LED module, contact the manufacturer

One LED module cuts out.

LED module incorrectly installed and connected. LED module faulty.