Barricade® Fuel Line Hosewith GreenShield® Technology

BARRIER TUBE: Fortified to resist high heat and aggressive fuels such as Ethanol

GREENSHIELD® BARRIER: Patent-pending thermoplastic material delivers the lowest permeation in the industry

ADHESION LAYER: Serves as a second defense against oil and aggressive fuels

REINFORCEMENT: Textile spiral weave provides best-in-class working psi*

COVER: Outstanding ozone and heat resistance

F U E L I N J E C T I O N A N D C A R B U R E T I O N H O S E

MODERN FUELS REQUIRE MODERN FUEL HOSE.Installing Barricade protects the system against the aggressive fuel mixtures of today’s modern fuels, which can degrade

basic rubber hose and result in customer comebacks. Plus with Barricade, you can be assured that you are complying with

permeation laws, and providing your customers with the best hose available –

all while being environmentally-friendly.

• BEST-IN-CLASS working psi of 225 (for fuel injection)

• Lowest permeation rate on the market 1 gr/m2/day

• Exceeds California Air Resources Board (CARB) and EPA requirement

• Multi-fuel compatible: Approved for use with leaded and

unleaded Gasoline, Diesel, Biodiesel†, E-85, 100% Methanol,

ETHANOL and gasohol fuels

• Performs 5x better for permeation than the nearest competitor

*Barricade Fuel Injection has a best-in-class working pressure of 225 psi † Biodiesel fuel must meet the ASTM D6751 specification for biodiesel fuel and be produced, marketed and distributed by BQ9000 accredited facilities.

States that have adopted CARB standards

Don’t make a mistake: in CARB-regulated states, it is ILLEGAL to “alter the original design of the system.” Replacement of OEM hose with general-purpose carburetion hose is considered an alteration.

Fuel InjectIon Hose

MoDeRn Fuels ReQuIRe MoDeRn Fuel HoseSpeedflow has a long relationship with the Gates Corporation in supplying the performance industry with their quality hoses to suit our range of fittings.We are excited to now stock the Gates premium range of Barricade fuel injection hose. Check out the information on this flyer about the outstanding performance of this standard replacement EFI fuel hose to meet the demands of modern fuel blends.

Installing Barricade protects the system against the aggressive fuel mixtures of today’s modern fuels, which can degradebasic rubber hose and result in customer comebacks. Plus with Barricade, you can be assured that you are complying withpermeation laws, and providing your customers with the best hose available – all while being environmentally-friendly.

• BEST-IN-CLASS working psi of 225 (for fuel injection)• Lowest permeation rate on the market 1 gr/m2/day• Exceeds California Air Resources Board ( CARB) and EPA requirement• Multi-fuel compatible: Approved for use with leaded and unleaded Gasoline, Diesel, Biodiesel†, E-85, 100% Methanol, ETHANOL and gasohol fuels• Performs 5x better for permeation than the nearest competitor

*Barricade Fuel Injection has a best-in-class working pressure of 225 psi † Biodiesel fuel must meet the ASTM D6751 specification for biodiesel fuel and be produced, marketed and distributed by BQ9000 accredited facilities.

What’s in the tank? Because there are so many fuel blends available today, there is no way to know what mixture of fuel is in your customer’s tank at any given time. You can’t predict how quickly these aggressive fuels will degrade conventional hose, and cause a failure that will bring your customer back to your shop. When you install Barricade Fuel Line Hose, you can be assured that you are complying with the law, providing your customers with the best product available, and protecting the system against aggressive fuel mixtures that can degrade the hose and result in customer comebacks.

Two feet of general-purpose hose permeates

up to one gallon of hydrocarbon vapors into

the atmosphere each year. Compare that

to only two tablespoons of permeation

with superior Barricade® Fuel Line Hose.

One Gallon vs. Two Tablespoons

vs.vs.

Better for the Environment. Safer for You. Installing Barricade® solves two problems at once: compliance with CARB pollution standards, and protecting yourself from liability for installing the wrong hose type. The first problem is fuel permeation. The California Air Resources Board (CARB) and U. S. Environmental Protection Agency (EPA) standards stipulate the maximum allowable permeation rates for fuel hose. Barricade exceeds these standards and does it better than any other hose in the industry.

Most original equipment (OE) cars and trucks have been using CARB-approved “low permeation” fuel line hoses for over 20 years as a pollution-control device, and since 2007, small engine and off-highway equipment have as well. It is ILLEGAL to replace low-permeation hose with conventional hose in the 20 states that have adopted the CARB standards.

Barricade not only beats the California Air Resources Board’s permeation requirements, it performs five times better than the nearest competitor.

• 225 psi working pressure rating (best-in-class)

• Aramid reinforcement spiral braid for superior burst strength

• Exceeds SAE J30R14T2* as well as low-permeation requirements for CARB

• Approved for use with Gasoline, Ethanol/Gasoline blends (gasohol) such as E10, E15 or E85, Diesel, Biodiesel including soybean methyl ester (SME), rapeseed methyl ester (RME), palm methyl ester (PME), Biodiesel/Diesel blends such as B20, and 100% Methanol

• Temperature: -40°F to 275°F (-40°C to 135°C) continuous, up to 302°F (150°C) intermittent

Barricade Fuel Injection HoseLow-permeation, fuel injection hose for use on all fuel systems for superior service life. Best-in-class for both high PSI and low permeation.

NOTE: DO NOT SUBMERSE IN FUEL.

* Except for kink resistance

BARRICADE® FUEL INJECTION HOSE

Size Working 2’ Clamshell 15’ Box 25’ Reel 250’ Bulk Reel I.D. psi Part # Part # Part # Part #

1/4” 225 27334 27347 27339 27344

5/16” 225 27335 27348 27340 27345

3/8” 225 27336 27349 27341 27346

and U. S. Environmental Protection Agency (EPA) standards stipulate the maximum allowable permeation rates for fuel hose.

Most original equipment (OE) cars and trucks have been using CARB-approved “low permeation” fuel line hoses for over20 years as a pollution-control device, and since 2007, small engine and off-highway equipment have as well. It is

to replace low-permeation hose with conventional hose in the 20 states that have adopted the CARB standards.

Barricade not only beats the California Air Resources Board’s permeation requirements,

What’s in the tank? Because there are so many fuel blends available today, there is no way to know what mixture of fuel is in your customer’s tank at any given time. You can’t predict how quickly these aggressive fuels will degrade conventional hose, and cause a failure that will bring your customer back to your shop. When you install Barricade Fuel Line Hose, you can be assured that you are complying with the law, providing your customers with the best product available, and protecting the system against aggressive fuel mixtures that can degrade the hose and result in customer comebacks.

15 10

CARB Lowest Competitor

Permeation Rate (Grams/m2/day)5 0

GAtes BARRIcADe eFI Hose - PARt nuMBeRs

sIze PeR MeteR 25Ft (7.62M) Roll 250Ft (76.2M) Roll

1/4” G27330 G27339 G27344

5/16” G27331 G27340 G27345

3/8” G27332 G27341 G27346

1/2” Available Soon in 1/2” I.D. Size

Barricade Fuel Injection Hose• Fuel injection engines, fuel lines, EEC/EGR,

cars and light duty trucks• Air pump, PCV valve compatible with

Gas/Diesel and Ethanol• Pressure rating: 225 psi (best-in-class)

• Temperature: -40°F to 257°F (-40°C to 135°C) continuous, up to 302°F (150°C) intermittent

NOTE: DO NOT SUBMERSE IN FUELPlease check for availability of sizes and lengths, as stock is not always available.

SPEEDFLOW PRODUCTS PTY LTD · 3-5 COOLABAH DRIVE, TAREE, NSW 2430, AUSTRALIA · PH: 61 2 6552 6144 · FAx: 61 2 6551 0253www.speedflow.com.au · email: products@speedflow.com.au

August 2013 - gAtes bArricAde hose