FIB

REG

LAS

S M

OU

LDED

GR

ATI

NG

FIBREGLASS GRATING - is available in two resin types:

Polyester Isophthalic – Moderate exposure to corrosive elements; and a low flame spread rating of 25 or less. Colours available: Green or Light Grey. Depth available: 25mm / 30mm / 38mm and 50mm Panel Size: 2440mm x 1220mm

Vinyl Ester – For resistance to both acid and alkaline environments; and a flame spread of 25 or less. Colours available: Orange Depth available: 38mm Panel Size: 2440x1220mm

Fibreglass Grating – Is easy to install, requiring only a circular saw, jig saw or angle grinder to cut.

FIBREGLASS MOULDED GRATING

Fibreglass Grating Functions:

Anti-slip floor, stair tread, a footbridge

The operation platform, trench cover

Security and safety fence, handrail

Off-shore oil rig, shipyard, shipping deck, ceiling

Ramp ladder, scaffold, railway

Decorative grid, man-made fountain pool grid

Non-conductive and non-magnetic

Fibreglass Grating Advantages:

Anti-fire

Anti-corrosion and anti-ageing

Anti-slippery

Light but high loaded strength

Long service life and maintenance-free

Non-conduction or magnetic

Easy installation and rich colours

Various sizes available

Fiberglass stairs or stair treads as they are commonly known are the perfect solution for a corrosive environment. FRP Stairs are made from Moulded Fibreglass Grating. FRP stair treads are simply FRP Grating with nosing. Nosing is a rectangular area at the leading edge of a stair tread designed to minimize any tripping hazard and add strength.

Molded stair treads are manufactured in 3660mm lengths 270mm wide, the stair tread can be cut back for narrower stairs.

MOLDED Stair Treads with 38mm square Mesh:

750x245mm Moulded 38mm Thick 38mm Square Mesh. Green. 900 x 245mm Moulded 38mm Thick 38mm Square Mesh. Green.

Fully cover a stair area with an anti-slip surface.

Each FRP stair tread covers the entire step area, overlapping the edge onto the riser acting as stair protectors. Easy installation

3,660 x 250 x 45 x 3mm

Cut to any size, from the above standard size.

FIBREGLASS MOULDED STAIR TREADS

FIBREGLASS STEP COBERS

CHEMICAL MAX OPER TEMP.

% Conc Type 'Vinyl' Type 'ISO'

Hydrochloric acid 30 82 65

Nitric acid 35 38 N/R

Sulphuric acid 25 82 65

Hydrofluoric acid 10 24 N/R

Lactic acid 100 82 65

Hypochlorous acid SAT 60 N/R

citric acid ALL 49 N/R

Potassium hydroxide 10 49 N/R

Sodium hydroxide 10 82 N/R

Calcuim hydroxide 25 82 65

Calcium hypochloride 25 82 65

Ferric chloride 100 82 65

Aluminium chloride ALL 82 65

Mercuric chloride 100 82 65

silver nirate 100 82 65

sodium salt ALL 24 N/R

Zinc chloride ALL 24 24

Acetone 100 124 N/R

Chloroform 100 N/R N/R

Fuel ALL 38 38

Nantokite ALL 82 65

Phenols 10 24 N/R

Ozone ALL 38 38

Bleaching liquid ALL 82 N/R

Ammonium hydroxide 30 24 N/R

Ammonium salt ALL 24 N/R

Black sewage ALL 82 N/R

Cupric oxide ALL 52 52

Glycol 100 82 65

Sulfur dioxide SAT 82 65

Sodium phosphate 50 82 N/R

Water 100 82 65

Alum ALL 82 65

Chlorine water SAT 49 N/R

ALL - concentrations; SAT - saturated solution; N/R - not recommended

FIBREGLASS CHEMICAL RESISTANCE CHART

IMPORTANT NOTES

A. U, kg/m2, maximum allowable unfactored uniformly distributed loading for that stated span

B. C, kg/m, maximum allowable unfactored centre line load per metre

C. Load/Span Tables based on elastic deflections of span/200 or 10mm, whichever the

lesser when subjected to the specified unfactored load

D. All table loadings to be taken as nominal and should not be used as guaranteed values

E. Appropriate safety factors must be applied by the designer

FIBREGLASS MOULDED GRATING LOADING TABLE

o MOULDED

o SUGGESTED RANGE

All grating should be fastened down with a sufficient number of clips to resist movement of the grating or edges raising up and presenting a tripping hazard.

Made exclusively of 316 Stainless Steel.

M-Clip

M-Clips are available to suit the following size depths; 25mm / 30mm and 38mm.

Full sets include: M-clip + Bolt, Nut & Washer.

Spec: 38mm M-Clip – M8x50mm Bolt & Nut.

25mm M-Clip -

C-Clip

C-Clips are available to suit the following size depths; 25mm / 30mm and 38mm.

Full sets include: C-Clip + Bolt & nut.

Saddle Clamp Fixing

Saddle clamp’s available to suit the following size depths: 25mm / 30mm and 38mm.

Spec: M8 x 55 Long Grade 316 Stainless Steel Bolt, M8 Grade 316 Stainless Steel Nut, Bottom Clamp Grade 316 Stainless Steel

FIBREGLASS FIXING CLIPS

Fibreglass Grating CC

Unit 8, 126 14th Avenue, Anderbolt, Boksburg.

Tel; 011 894 6111

www.fibreglassgrating.co.za

Contact:

Maxine – 071 606 1558 / Maxine@frpproducts.co.za

Brenda – 083 611 7599 / Brenda@frpproducts.co.za