Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
PRODUCT MODIFICATIONS Price List Supplement
This price list supplements theKimball Legacy Price List and theKimball Desks & AccessoriesPrice List with standard productmodifications.
Kimball Page 1
➤See page
Casegoods
Priority™ 2
Senator™ 3
President™ 21
Tables
Contemporary/Transitional 31
Traditional 36
Innsbruck™ 41
GSA Price List Effective Dates:Pricing 03.14.19Revision 05.07.19
Kimball Page 2
Priority ■ Product Modifications
GSA SIN 711-8PRIORITY P-Shaped Worksurfaces
How to Specify
! Add M to beginning of Model@ Worksurface material: L = Laminate with softened vinyl rim
LW = Laminate with wood rim3 Worksurface type: M = Main E = Extension
4 Rim profile:P = Softened vinyl (L model only)
F = Softened (LW model only) M = Reed (LW model only)5 Worksurface finish price group:STD = Group 1
6 Worksurface finish designator7 Rim finish price group (omit for
L model):STD = Group 1
8 Rim finish designator (omit for L model)
9 Reduce width: 66.00 = 66” (+$)
➤See the Kimball Desks & Accessories Price List for product information, finishes and materials, and related products.
Conf. Area Priority Laminate Priority Wood D W H Diameter Model (L) (LW)
Right
Softened Vinyl Rim (P)
30" 72" 13⁄16" 36" 53K3072WSPR $776 —
Softened (F) or Reed (M) Wood Rim
30" 72" 13⁄16" 36" 53K3072WSPR — $1137
Left
Softened Vinyl Rim (P)
30" 72" 13⁄16" 36" 53K3072WSPL $776 —
Softened (F) or Reed (M) Wood Rim
30" 72" 13⁄16" 36" 53K3072WSPL $1137
Product Modifications:Description How to Specify Add/Deduct $
Reduce width (66”W) Specify 66.00 in step 9 +$70
Product modifications are notpossible on models with laminatework surfaces (LW).
Reduced width modifications arenot currently available on thisproduct; however, an X is requiredin your specification as indicated inthe How to Specify steps.
SENATOR 36"D Double Pedestal DesksWith Breakfront or Flush Modesty Panel
How to Specify
! Add M to beginning of model @ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option: 28AB = Antique Brass 26AB [leather designator] =President leather-wrapped pulls (+$)
5 Lock option: KRB = Key random KSB = Key specific (-$)6 Left grommet option: G7AB = With grommet (+$) X = Without grommet7 Right grommet option: G7AB = With grommet (+$) X = Without grommet8 Finish type: STD = Group 19 Finish designatorbl Reduced depth (omit for
breakfront model): 30.000 = 30”D (+$) X = No modificationbm Reduced width: X = No modif.bn Pedestal modification: 2 = FF/FF 16 = PBF/FF 17 = FF/PBF X = No modif.bo Delete center drawer Y = Yes N = Nobp Leather top:
Leather color designator (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 3
Senator ■ Product Modifications
GSA SIN 711-8
Modesty Panel Approach Arm Chair StandardD W H Kneespace Recess Overhang Clearance Model Price
Breakfront Modesty Panel and Pencil/Box/File Pedestals Left and Right
36" 72" 301⁄4" 317⁄8" 6" 1" 24" SN3672DDFB $5821
Flush Modesty Panel and Pencil/Box/File Pedestals Left and Right
36" 72" 301⁄4" 317⁄8" 7" 24" SN3672DDF $5023
Options:Description How to Specify Add/Deduct $
Molding Specify M in step 3. +$129
Factory-installed grommets Specify G7AB in step 6 and/or 7. +$66 per grommet
Locking drawers, key specific Specify KSB in step 5. -$27Note: Lock cores must be specified separately for key specific option.
Note: Illustrations show deskwith molding option.
Product Modifications:Description How to Specify Add/Deduct $
President leather-wrapped pulls Specify 26AB followed by leather color designator in Step 4. +$23 (per pull) Example: 26AB70425
Reduce depth (30”D) on flush model Specify 30.000 in step bl +$67
Substitute FF pedestal, left and right Specify 2 in step bn. no charge
Substitute FF pedestal, right Specify 16 in step bn. no charge
Substitute FF pedestal, left Specify 17 in step bn. no charge
Delete center drawer Specify Y in step bo. no charge
Leather top Specify leather designator in step bp. +$2497
Product modifications are notpossible on models with laminatework surfaces (LW).
SENATOR 30"D Double Pedestal DesksWith Flush Modesty Panel
How to Specify
! Add M to beginning of model# Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option: 28AB = Antique Brass5 Lock option: KRB = Key random KSB = Key specific (-$)6 Left grommet option: G7AB = With grommet (+$) X = Without grommet7 Right grommet option: G7AB = With grommet (+$) X = Without grommet8 Finish price group: STD = Group 19 Finish designatorbl Delete center drawer: Y = Yes N = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 4
Senator ■ Product Modifications
GSA SIN 711-8
Approach Arm ChairD W H Kneespace Overhang Clearance Standard Model Price
Pencil/Box/File Pedestals Left and Right
30" 66" 301⁄4" 317⁄8" 17⁄8" 24" SN3066DDF $4856
Options:Description How to Specify Add/Deduct $
Molding Specify M in step 3. +$129
Factory-installed grommets Specify G7AB in step 6 and/or 7. +$66 per grommet
Locking drawers, key specific Specify KSB in step 5. -$27Note: Lock cores must be specified separately for key specific option.
Product Modifications:Description How to Specify Add/Deduct $
Delete center drawer Specify Y in step bl no charge
Note: Illustrations show deskswith molding option.
Product modifications are notpossible on models with laminatework surfaces (LW).
Reduced depth and widthmodifications are not currentlyavailable on this product; however,an X is required in yourspecification as indicated in theHow to Specify steps.
SENATOR Table Desks
How to Specify
! Add M to beginning of model @ Worksurface material: W = Wood3 Pull option:28AB = Antique Brass
26AB [leather designator] =President leather-wrapped pulls (+$)
4 Finish price group: STD = Group 15 Finish designator6 Reduced depth: X = No modification7 Reduced width: X = No modification8 Left grommet: Y = Yes (+$) N = No9 Right grommet: Y = Yes (+$) N = Nobl Delete center drawer: Y = Yes N = Nobm Leather top:
Leather color designator (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 5
Senator ■ Product Modifications
GSA SIN 711-8
Arm Chair D W H Clearance Standard Model Price
Table Desk
36" 72" 301⁄2" 24" SN3672DT $2885
Product Modifications:Description How to Specify Add/Deduct $
President leather-wrapped pulls Specify 26AB followed by leather color designator in Step 3. +$23 Example: 26AB70425 (per pull)
Add grommets Specify Y in steps 8 and/or 9. +$73
Delete center drawer Specify Y in step bl. no charge
Leather top Specify leather designator in step bm. +$2497
Product modifications are notpossible on models with laminatework surfaces (LW). Reduced depth and widthmodifications are not currentlyavailable on this product; however,an X is required in yourspecification as indicated in theHow to Specify steps.
SENATOR Single-Pedestal Desks With Breakfront Modesty Panel
How to Specify
! Add M to beginning of model@ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option:28AB = Antique Brass
5 Lock option: KRB = Key random KSB = Key specific (-$)6 Left grommet option: G7AB = With grommet (+$) X = Without grommet7 Right grommet option: G7AB = With grommet (+$) X = Without grommet8 Finish price group: STD = Group 19 Finish designatorbl Reduce depth: 30.000 = 30”D (+$)X = No modification
bm Reduce width: X = No modificationbn Increase width: X = No modificationbo Delete center drawer: Y = Yes N = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 6
Senator ■ Product Modifications
GSA SIN 711-8
Note: Illustrations show deskswith molding option.
Modesty Panel Approach Arm Chair Standard
D W H Kneespace Recess Overhang Clearance Model Price
Pedestal on Right
36" 72" 301⁄4" 27" 6 1 24" SN3672DRF $5469
Pedestal on Left
36" 72" 301⁄4" 27" 6 1 24" SN3672DLF $5469
Options:Description How to Specify Add/Deduct $
Molding Specify M +$129
Factory-installed grommets Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth (30”D) Specify 30.000 in step bl +$67
Delete center drawer Specify Y in step bo �no charge
Product modifications are notpossible on models with laminatework surfaces (LW).
SENATOR Single-Pedestal Desks With Flush Modesty Panel
How to Specify
! Add M to beginning of model@ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option:28AB = Antique Brass
5 Lock option: KRB = Key random KSB = Key specific (-$)6 Left grommet option: G7AB = With grommet (+$) X = Without grommet7 Right grommet option: G7AB = With grommet (+$) X = Without grommet8 Finish price group: STD = Group 19 Finish designatorbl Delete center drawer: Y = Yes N = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 7
Senator ■ Product Modifications
GSA SIN 711-8
Product Modifications:Description How to Specify Add/Deduct $
Delete center drawer Specify Y in step bl no charge
Options:Description How to Specify Add/Deduct $
Molding Specify M in step 3 +$129
Factory-installed grommets Specify G7AB in step 6 and/or 7 +$66 per grommet
Locking drawers, key specific Specify KSB in step 5 -$27Note: Lock cores must be specified separately for key specific option.
Modesty Panel Approach Arm Chair Standard
D W H Kneespace Recess Overhang Clearance Model Price
Pencil/Box/File Pedestal on Right
30" 66" 301⁄4" 24" — — 24" SN3066DRF $4362
Pencil/Box/File Pedestal on Left
30" 66" 301⁄4" 24" — — 24" SN3066DLF $4362
Product modifications are notpossible on models with laminatework surfaces (LW).
SENATOR Executive Returns With Full Modesty Panel
How to Specify
! Add M to beginning of model @ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option:28AB = Antique Brass
26AB [leather designator] =President leather-wrapped pulls(+$)
5 Lock option KRB = Key random
KSB = Key specific (-$)6 Center grommet option: G7AB = With grommet (+$) X = Without grommet7 Finish price group: STD = Group 18 Finish designator9 Reduced width: 42.000 = 42"W (+$) 48.000 = 48"W (+$) X = No modificationbl Pedestal modification: 2 = FF D = Delete pedestal X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 8
Senator ■ Product Modifications
GSA SIN 711-8
Product Modifications:Description How to Specify Add/Deduct $
President leather-wrapped pulls Specify 26AB followed by leather color designator in Step 4 +$23 Example: 26AB70425 (per pull)
Reduce width (42" or 48"W) Specify 42.000 or 48.000 in step 9 +$29
Substitute file/file pedestal Specify 2 in step bl no charge
Delete pedestal Specify D in step bl no charge
Arm Chair D W H Kneespace Clearance Standard Model Price
Pencil/Box/File Pedestal on Right
25" 507⁄8" 301⁄4" 30" 29" SN2551RREF $3157
Pencil/Box/File Pedestal on Left
25" 507⁄8" 301⁄4" 30" 29" SN2551RLEF $3157
Note: Illustrations show returnswith molding option.
Options:Description How to Specify Add/Deduct $
Molding Specify M +$99
Factory-installed grommets Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Product modifications are notpossible on models with laminatework surfaces (LW).
Reduced depth modification isnot currently available on thisproduct; however, an X isrequired in your specification asindicated in the How to Specifysteps.
SENATOR Executive Returns With Partial Modesty Panel
How to Specify
! Add M to beginning of model@ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option:28AB = Antique Brass
5 Lock option KRB = Key random
KSB = Key specific (-$)6 Center grommet option: G7AB = With grommet (+$) X = Without grommet7 Finish price group: STD = Group 18 Finish designator9 Reduce depth: X = No modificationbl Reduce width: 45.000 = 45”W (+$) 48.000 = 48”W (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 9
Senator ■ Product Modifications
GSA SIN 711-8
Arm ChairD W H Kneespace Clearance Standard Model Price
Pencil/Box File Pedestal on Right
25" 507⁄8" 301⁄4" 31" 29" SN2551RREQ $3157
Pencil/Box File Pedestal on Left
25" 507⁄8" 301⁄4" 31" 29" SN2551RLEQ $3157
Options:Description How to Specify Add/Deduct $
Molding Specify M +$99
Factory-installed grommets Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Note: Illustrations show returnswith molding option.
Product Modifications:Description How to Specify Add/Deduct $
Reduce width (45” or 48”D) Specify 45.000 or 48.000 in step bl +$29
Product modifications are notpossible on models with laminatework surfaces (LW).
SENATOR Bridges
How to Specify
! Add M to beginning of model @ Worksurface material: W = Wood3 Molding option (omit for partial
modesty bridge): M = With molding (+$) X = Without molding4 Center grommet option: G7AB = With grommet (+$) X = Without grommet5 Finish price group: STD = Group 16 Finish designator7 Reduced width: 42.000 = 42"W (+$) 48.000 = 48"W (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 10
Senator ■ Product Modifications
GSA SIN 711-8
Arm Chair D W H Kneespace Clearance Standard Model Price
Hinged Modesty Panel
25" 507⁄8" 301⁄4" 487⁄8" 29" SN2551BEFH $1954
Partial Modesty Panel
25" 507⁄8" 113⁄16" 487⁄8" 29" SN2551BEQ $1954
Options:Description How to Specify Add/Deduct $
Molding on hinged modesty panel Specify M +$56
Factory-installed grommet Specify G7AB +$66 per grommet
Product Modifications:Description How to Specify Add/Deduct $
Reduce width (42" or 48"W) Specify 42.000 or 48.000 in step 7 +$29
For use with bridge only.
Product modifications are notpossible on models with laminatework surfaces (LW).
Reduced depth modification isnot currently available on thisproduct; however, an X isrequired in your specification asindicated in the How to Specifysteps.
SENATOR Single-Pedestal Credenzas
How to Specify
! Add M to beginning of model@ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option: 28AB = Antique Brass5 Lock option KRB = Key random KSB = Key specific (-$)6 Left grommet option: G7AB = With grommet (+$) X = Without grommet 7 Center grommet option:
(omit for lateral file credenza) G7AB = With grommet (+$) X = Without grommet 8 Right grommet option: G7AB = With grommet (+$) X = Without grommet 9 Finish price group: STD = Group 1bl Finish designatorbm Reduce depth: 20.000 = 20”D (+$) X = No modificationbn Reduce width: 66.000 = 66”W (+$) 72.000 = 72”W (+$) X = No modificationbo Increase width: X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 11
Senator ■ Product Modifications
GSA SIN 711-8
Arm ChairD W H Clearance Standard Model Price
File/File Pedestal on Right
231⁄2" 7413⁄16" 301⁄4" 28" SN2475CRF2 $4263
File/File Pedestal on Left
231⁄2" 7413⁄16" 301⁄4" 28" SN2475CLF2 $4263
Options:Description How to Specify Add/Deduct $
Molding Specify M +$116
Factory-installed grommets Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Note: Illustrations showcredenzas with molding option.
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth (20”D) Specify 20.000 in step bm +$67
Reduce width (66” or 72”W) Specify 66.000 or 72.000 in step bn +$29
Accepts keyboard drawer ortrays only.
Product modifications are notpossible on models with laminatework surfaces (LW).
Increased width modification isnot currently available on thisproduct; however, an X isrequired in your specification asindicated in the How to Specifysteps.
SENATOR Kneespace Credenzas
How to Specify
! Add M to beginning of model@ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option:28AB = Antique Brass
5 Lock option: KRB = Key random KSB = Key specific (-$)6 Left grommet option: G7AB = With grommet (+$) X = Without grommet 7 Center grommet option: G7AB = With grommet (+$) X = Without grommet 8 Right grommet option: G7AB = With grommet (+$) X = Without grommet 9 Finish price group: STD =
Standard bl Finish designatorbm Reduce depth: 20.000 = 20”D (+$) X = No modificationbn Reduce width: 66.000 = 66”W (+$) X = No modificationbo Increase width: X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 12
Senator ■ Product Modifications
GSA SIN 711-8
Arm ChairD W H Clearance Standard Model Price
Pencil/Box/File Pedestals Left and Right
231⁄2" 7413⁄16" 301⁄4" 28" SN2475CKF $4482
Options:Description How to Specify Add/Deduct $
Molding Specify M +$116
Factory-installed grommets Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Note: Illustrations show credenzawith molding option.
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth (20”D) Specify 20.000 in step bm +$67
Reduce width (66”W) Specify 66.000 in step bn +$29
Product modifications are notpossible on models with laminatework surfaces (LW).
Reduced width modification isnot currently available on thisproduct; however, an X isrequired in your specification asindicated in the How to Specifysteps.
Lateral file substitution replacesboth pencil/box/file pedestalsand the double-door storage.
SENATOR Storage Credenzas
How to Specify
! Add M to beginning of model @ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option:28AB = Antique Brass
26AB [leather designator] =President leather-wrapped pulls (+$)
5 Lock option KRB = Key random
KSB = Key specific (-$)6 Left grommet option: G7AB = With grommet (+$) X = Without grommet7 Center grommet option: G7AB = With grommet (+$) X = Without grommet8 Right grommet option: G7AB = With grommet (+$) X = Without grommet9 Finish price group: STD = Group 1bl Finish designatorbm Reduced width: X = No modificationbn Pedestal modification: 2 = FF/FF 6 = LF/LF 16 = PBF/FF 17 = FF/PBF X = No modificationbo Reduce depth: 20.000 = 20”D (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 13
Senator ■ Product Modifications
GSA SIN 711-9
Product Modifications:Description How to Specify Add/Deduct $
President leather-wrapped pulls Specify 26AB followed by leather color designator in Step 4. +$23 Example: 26AB70425 (per pull)
Substitute file/file pedestals, Specify 2 in step bn no chargeleft and right
Substitute lateral file pedestals, Specify 6 in step bn no chargeleft and right
Substitute file/file pedestal, right Specify 16 in step bn no charge
Substitute file/file pedestal, left Specify 17 in step bn no charge
Reduce depth (20”D) Specify 20.000 in step bo +$67
Arm Chair D W H Clearance Standard Model Price
Pencil/Box/File Pedestals Left and Right
231⁄2" 7413⁄16" 301⁄4" SN2475CSF $4643
Options:Description How to Specify Add/Deduct $
Molding Specify M +$116
Factory-installed grommets Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Note: Illustrations show credenzawith molding option.
SENATOR Highback OrganizersFor Use on 75"W Credenzas
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator4 Reduced width: 66.000 = 66"W (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 14
Senator ■ Product Modifications
GSA SIN 711-8
Worksurface D W H Clearance Standard Model Price
Wood Doors
151⁄2" 74" 5011⁄16" 2015⁄16" TD7451HBHW $6499
Product Modifications:Description How to Specify Add/Deduct $
Reduce width (66"W) Specify 66.000 in step 4 +$281
Note: Illustration shows grille-door model. Only models withwood doors are available formodification.
SENATOR Lateral Files
How to Specify
! Add M to beginning of model@ Worksurface material: W = Wood3 Pull option:28AB = Antique Brass
4 Lock option: KRB = Key random KSB = Key specific (-$)5 Finish price group: STD = Group 16 Finish designator7 Reduce Depth: 20.000 = 20”D (+$)8 Add molding: B = Both end panels L = Left end panel R = Right end panel X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 15
Senator ■ Product Modifications
GSA SIN 711-8
D W H Standard Model Price
Two-Drawer Lateral File
231⁄2" 387⁄8" 301⁄4" SN2439LFF2 $2643
Four-Drawer Lateral File
231⁄2" 387⁄8" 557⁄16" SN2439LFF4 $4676
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth (20”D) Specify 20.000 in step 7 +$67
Add molding to both end panels Specify B in step 8 �+$116
Add molding to left or right end panels Specify L or R in step 8 +$99
Options:Description How to Specify Add/Deduct $
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
SENATOR Component StorageFor Use with Credenza Worksurface
How to Specify
! Add M to beginning of model2 Pull option: 28AB = Antique Brass
3 Lock option: KRB = Key random KSB = Key specific (-$)4 Finish price group: STD = Group 15 Finish designator6 Reduce depth: 20.000 = 20”D (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 16
Senator ■ Product Modifications
GSA SIN 711-8
D W H Standard Model Price
Box/Box/File Pedestal
231⁄2" 18" 291⁄16" SN2318PUBBF $2051
Note: All storage componentsrequire a credenza worksurface.
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth (20”D) Specify 20.000 in step 6 +$67
Options:Description How to Specify Add/Deduct $
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
SENATOR Component StorageFor Use with Credenza Worksurface
How to Specify
! Add M to beginning of model2 Pull option: 28AB = Antique Brass
3 Lock option: KRB = Key random KSB = Key specific (-$)4 Finish price group: STD = Group 15 Finish designator6 Molding: B = Both side panels (+$) L = Left side panel (+$) R = Right side panel (+$) X = No modification7 Reduce depth: 20.000 = 20”D (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 17
Senator ■ Product Modifications
GSA SIN 711-8
Product Modifications:Description How to Specify Add/Deduct $
President leather-wrapped pulls Specify 26AB followed by leather color designator in Step 2 +$23 Example: 26AAB70425 (per pull)
Add molding on both side panels Specify B in step 5 +$116
Add molding on left or right side panel Specify L or R in step 5 +$99
Reduce depth (20”D) Specify 20.000 in step 6 +$67
D W H Standard Model Price
Two-Drawer Lateral File
231⁄2" 357⁄8" 291⁄16" SN2336LFM2 $2277
Note: All storage componentsrequire a credenza worksurface.
Options:Description How to Specify Add/Deduct $
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
SENATOR Component Storage, continuedFor Use with Credenza Worksurface
How to Specify
! Add M to beginning of model 2 Pull option: 28AB = Antique Brass
26AB [leather designator] =President leather-wrapped pulls(+$)
3 Finish price group: STD = Group 14 Finish designator5 Reduced width: 30.000 = 30"W (+$) 32.000 = 32"W (+$) 34.000 = 34"W (+$) X = No modification6 Molding: B = Both side panels (+$) L = Left side panel (+$) R = Right side panel (+$) X = No modification7 Locking doors: KRB = Locking doors, key random (+$)
KSB = Locking doors, key specific (+$)
X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 18
Senator ■ Product Modifications
GSA SIN 711-8
D W H Standard Model Price
Storage Unit
225⁄8" 357⁄8" 291⁄16" SN2336PUH $1923
Note: All storage componentsrequire a credenza worksurface.
Product Modifications:Description How to Specify Add/Deduct $
President leather-wrapped pulls Specify 26AB followed by leather color designator in Step 2 +$23 Example: 26AB70425 (per pull)
Reduce width (30", 32", or 34"W) Specify 30.000, 32.000, or 34.000 in step 5 +$44
Add molding on both side panels Specify B in step 6 +$116
Add molding on left or right side panel Specify L or R in step 6 +$99
Locking doors, key random Specify KRB in step 7 +$79
Locking doors, key specific Specify KSB in step 7 +$52
SENATOR Bookcases
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator4 Reduced width: 30.000 = 30"W (+$) 32.000 = 32"W (+$) 34.000 = 34"W (+$) X = No modification5 Reduced height (omit for 70"H
model): 25.000 = 25"H (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 19
Senator ■ Product Modifications
GSA SIN 711-8
D W H Standard Model Price
70"H Open Bookcase (four shelves)
14" 357⁄8" 6911⁄16" SN3670BCO $3440
48"H Open Bookcase (three shelves)
14" 357⁄8" 473⁄8" SN3648BCO $1601
Product Modifications:Description How to Specify Add/Deduct $
Reduce width (30", 32", or 34"W) Specify 30.000, 32.000, or 34.000 in step 4 +$86
Reduce height on 48"H model (25"H) Specify 25.000 in step 5 +$44
SENATOR Bookcase Tops and BasesFor Use with Credenza Worksurface
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator4 Reduced width:
➤See modifications at left (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 20
Senator ■ Product Modifications
GSA SIN 711-8
D W H Standard Model Price
Bookcase Tops
For One Unit
151⁄2" 387⁄8" 13⁄16" SN1539CPTW $649
Bookcase Base
For One Unit
145⁄8" 37" 35⁄16" SN1537CPB $334
Product Modifications:Description How to Specify Add/Deduct $
Reduce width on top (33", 35", or 37"W) Specify 33.000, 35.000, or 37.000 in step 4 +$15
Reduce width on base Specify 31.000, 33.000, or 35.000 in step 4 +$15(31", 33", or 35"W)
PRESIDENT 78"W Single-Pedestal DesksFor Use with Executive Returns or Bridges
How to Specify
! Add M to the beginning of model2 Molding option: M = With molding (+$) X = Without molding3 Pull option:26AB = Antique Brass26AB [leather designator] = leather-wrapped pulls (+$)
4 Lock option: KRB = Key random KSB = Key specific (-$)5 Left grommet option: G7AB = With grommet (+$) X = Without grommet6 Right grommet option: G7AB = With grommet (+$) X = Without grommet7 Finish price group: STD = Group 18 Finish designator9 Reduce depth: X = No modificationbl Reduce width: X = No modificationbm Increase width: X = No modificationbn Pedestal modification 2 = File/File ped (+$) D = Delete pedestal X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 21
President ■ Product Modifications
GSA SIN 711-8
Approach Arm ChairD W H Kneespace Overhang Clearance Standard Model Price
Pedestal on Right
With Wood Worksurface 36" 78" 301⁄4" 357⁄8" 75⁄8" 28" PR3678DRFW $6460
Pedestal on Left
With Wood Worksurface 36" 78" 301⁄4" 357⁄8" 75⁄8" 28" PR3678DLFW $6460
Options:Description How to Specify Add/Deduct $
Molding Specify M +$359
Leather-wrapped pulls Specify leather designator +23 per pull
Factory installed grommet Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Note: Illustration shows deskwith molding option.
Product Modifications:Description How to Specify Add/Deduct $
Modify pedestal to be file/file Specify 2 in step bn. +$359
Delete pedestal Specify D in step bn. no charge
PRESIDENT 72"W Single-Pedestal DesksFor Use with Executive Returns or Bridges
How to Specify
! Add M to beginning of model2 Molding option: M = With molding (+$) X = Without molding3 Pull option:26AB = Antique Brass26AB [leather designator] = leather-wrapped pulls (+$)
4 Lock option: KRB = Key random KSB = Key specific (-$)5 Left grommet option: G7AB = With grommet (+$) X = Without grommet6 Right grommet option: G7AB = With grommet (+$) X = Without grommet7 Finish price group: STD = Group 18 Finish designator9 Reduce depth: X = No modificationbl Reduce width: X = No modificationbm Increase width X = No modificationbn Dictation slide/approach side X = No modification Y = Dictation slide (+$)
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 22
President ■ Product Modifications
GSA SIN 711-8
Approach Arm ChairD W H Kneespace Overhang Clearance Standard Model Price
Pedestal on Right
With Wood Worksurface 36" 72" 301⁄4" 30" 73⁄8" 28" PR3672DRFW $5251
Pedestal on Left
With Wood Worksurface 36" 72" 301⁄4" 30" 73⁄8" 28" PR3672DLFW $5251
Options:Description How to Specify Add/Deduct $
Molding Specify M +$359
Leather-wrapped pulls Specify leather designator +$23 per pull
Factory installed grommet Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Product Modifications:Description How to Specify Add/Deduct $
Add legal width dictation slide/approach Specify Y in step bn. +$427
PRESIDENT Executive ReturnsWith Pencil/Box/File Pedestal
How to Specify
! Add M to beginning of model@ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option: 26AB = Antique Brass26AB [leather designator] = leather-wrapped pulls (+$)
5 Lock option (+$): KRB = Key random KSB = Key specific (-$)6 Center grommet option: G7AB = With grommet (+$) X = Without grommet7 Finish price group: STD = Group 18 Finish designator9 Reduce width: 45.000 = 45” wide (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 23
President ■ Product Modifications
GSA SIN 711-8
D W H Kneespace Standard Model Price
Pedestal on Right
25" 507⁄8" 301⁄4" 30" PR2551RREF $3710
Pedestal on Left
25" 507⁄8" 301⁄4" 30" PR2551RLEF $3710
Options:Description How to Specify Add/Deduct $
Molding Specify M +$251
Leather-wrapped pulls Specify leather designator +$23 per pull
Factory installed grommet Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Note: Illustrations show returnswith molding option.
Product Modifications:Description How to Specify Add/Deduct $
Reduce width Specify 45.000 in step 9 +$29
PRESIDENT Single-Pedestal Credenzas
How to Specify
! Add M to beginning of model@ Worksurface material: W = Wood3 Molding option: M = With molding (+$) X = Without molding4 Pull option:26AB = Antique Brass26AB [leather designator] =leather-wrapped pulls (+$)
5 Lock option: KRB = Key random KSB = Key specific (-$)6 Left grommet option: G7AB = With grommet (+$) X = Without grommet7 Center grommet option G7AB = With grommet (+$) X = Without grommet8 Right grommet option: G7AB = With grommet (+$) X = Without grommet9 Finish price group: STD = Group 1bl Finish designatorbm Reduce depth: X = No modificationbn Reduce width: X = No modificationbo Increase width: X = No modificationbp Pedestal modification: 1 = Box/box/file pedestal D = Delete pedestal X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 24
President ■ Product Modifications
GSA SIN 711-8
Arm ChairD W H Clearance Standard Model Price
File/File Pedestal on Right
231⁄2" 78" 301⁄4" 28" PR2478CRF2 $5009
File/File Pedestal on Left
231⁄2" 78" 301⁄4" 28" PR2478CLF2 $5009
Options:Description How to Specify Add/Deduct $
Molding Specify M +$185
Leather-wrapped pulls Specify leather designator +$23 per pull
Factory installed grommet Specify G7AB +$66 per grommet
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Note: Illustrations showcredenzas with molding option.
Product Modifications:Description How to Specify Add/Deduct $
Substitute box/box/file pedestal Specify 1 in step bp. No charge
Delete pedestal Specify D in step bp. No charge
PRESIDENT Task/Reception Station
How to Specify
! Add M to beginning of model@ Worksurface material: W = WoodLW = Laminate
3 Molding option M = With molding (+$) X = Without molding4 Center grommet option: G7AB = With grommet (+$) X = Without grommet5 Finish price group: STD = Group 16 Finish designator7 Reduce depth: 36.000 = 36” deep (+$) X = No modification8 Reduce width: 36.000 = 36” width (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 25
GSA SIN 711-8
President ■ Product Modifications
Arm ChairD W H Clearance Standard Model Price
Corner Unit
417⁄8" 417⁄8" 427⁄16" 29" PR4242CFT $5091
Options:Description How to Specify Add/Deduct $
Molding Specify M in step 3. +$285 per model
Factory installed grommet Specify G7AB +$66 per grommet
Note: Illustration shows stationwith molding option.
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth Specify 36.000 in step 7 +$51
Reduce width Specify 36.000 in step 8 +$51
PRESIDENT Highback Organizers
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator4 Reduced width: 66.000 = 66"W (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 26
President ■ Product Modifications
GSA SIN 711-8
Worksurface D W H Clearance Standard Model Price
Wood Doors
151⁄2" 74" 5011⁄16" 2015⁄16" TD7451HBHW $6499
Product Modifications:Description How to Specify Add/Deduct $
Reduce width (66"W) Specify 66.000 in step 4. +$281
Note: Illustration shows grille-door model. Only models withwood doors are available formodification.
PRESIDENT Component StorageFor Use with Credenza Worksurface and Base
How to Specify
! Add M to beginning of model 2 Pull option: 26AB = Antique Brass
26AB [leather designator] = Leather-wrapped pulls (+$)
3 Lock option: KRB = Key random KSB = Key specific (-$)4 Finish price group: STD = Group 15 Finish designator6 Molding: B = Both side panels (+$) L = Left side panel (+$) R = Right side panel (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 27
President ■ Product Modifications
GSA SIN 711-8
D W H Standard Model Price
Lateral Files
Two Lateral File Drawers22" 357⁄8" 253⁄16" PR2236LFM2 $2399
Options:Description How to Specify Add/Deduct $
Leather-wrapped pulls Specify leather designator +$23 per pull
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Product Modifications:Description How to Specify Add $ to Price
Add molding on both side panels Specify B in step 6 +$185
Add molding on left or right side panel Specify L or R in step 6 +$164
PRESIDENT Component Storage, continuedFor Use with Credenza Worksurface and Base
How to Specify
! Add M to beginning of model2 Pull option: 26AB = Antique Brass
26AB [leather designator] = leather-wrapped pulls (+$)
3 Lock option: KRB = Key random KSB = Key specific (-$)4 Finish price group: STD = Group 15 Finish designator6 Reduce depth X = No modification7 Reduce width: X = No modification8 Increase width: X = No modification9 Modify to be 3 drawers Y = Yes X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 28
President ■ Product Modifications
GSA SIN 711-8
D W H Standard Model Price
Lateral Files
Four Lateral File Drawers22" 357⁄8" 541⁄4" PR2236LFM4 $4681
Options:Description How to Specify Add/Deduct $
Leather-wrapped pulls Specify leather designator +$23 per pull
Locking drawers, key specific Specify KSB -$27Note: Lock cores must be specified separately for key specific option.
Note: All storage componentsrequire a credenza worksurfaceand base.
Product Modifications:Description How to Specify Add/Deduct $
Three-drawers Specify Y in step 9. No charge
Note: Overal height of unit will be reduced to 373⁄16"
PRESIDENT Bookcases
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 1 3 Finish designator4 Reduced width: 30.000 = 30"W (+$) 32.000 = 32"W (+$) 34.000 = 34"W (+$) X = No modification5 Reduced height (omit for 70”H
model): 25.000 = 25"H (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 29
President ■ Product Modifications
GSA SIN 711-8
D W H Standard Model Price
70"H Bookcase
14" 357⁄8" 6911⁄16" PR3670BCO $3440
48"H Bookcases (three shelves)
Open14" 357⁄8" 473⁄8" PR3648BCO $1601
Product Modifications:Description How to Specify Add/Deduct $
Reduce width (30", 32", or 34"W) Specify 30.000, 32.000, or 34.000 in step 4. +$86
Reduce height on 48"H model (25"H) Specify 25.000 in step 5. +$44
A
A
Note: “A” denotes adjustableshelves.
A
A
PRESIDENT Tops and BasesFor Use with Bookcases
How to Specify
! Add M to beginning of model# Worksurface material
(include for top only): W = Wood3 Finish price group: STD = Group 14 Finish designator5 Reduce width (bookcase top) 33.000 = 33” wide (+$) 35.000 = 35” wide (+$) 37.000 = 37” wide (+$) X = No modification6 Reduce width (bookcase base) 31.000 = 31” wide (+$) 33.000 = 33” wide (+$) 35.000 = 35” wide (+$)
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 30
President ■ Product Modifications
GSA SIN 711-8
D W H Standard Model Price
Bookcase Tops
For One Unit
151⁄2" 387⁄8" 13⁄16" PR1539CPT $665
Bookcase Bases
For One Unit
149⁄16" 37" 35⁄16" PR1537CPB $334
Product Modifications:Description How to Specify Add/Deduct $
Reduce width (bookcase top) Specify 33.000, 35.000, 37.000 in step 5 +$15
Reduce width (bookcase base) Specify 31.000, 33.000, 35.000 in step 6 +$15
Rim Profiles:Type 1—Applies to all wood or alllaminate tops only.
J Flat
Type 2—Applies to wood andlaminate with wood rim tops only.
A Radius B Bevel C Dbl. Rad.
D Bullnose E Transitional F Softened
G Beaded H Crescent M Reed
Type 3—Applies to wood andlaminate with wood rim tops only.
CH Chamfer RS Rv. Knife S Knife
Type 4—Applies to laminate tops.
V Softened vinyl
Round Table Tops
How to Specify
! Add M to beginning of model @ Model# Material: W = Wood LW = Laminate with wood rim
L = Laminate $ Rim type: 1 = J rim 2 = A, B, C, D, E, F, G, H, or M rim 3 = CH, RS, or S rim 4 = V rim (laminate top only)5 Finish option (include for wood
top only): R = Rubbed N = Non-rubbed
6 Rim profile: ➤See options at left.7 Grommet option:
➤See page 35. X = Without grommet8 Surface finish price group: STD = Group 1 STD2 = Group 2 (+20%)9 Surface finish designatorbl Rim finish price group (include for
laminate top with wood rim only): STD = Group 1 STD2 = Group 2 (+20%)bm Rim finish designator (include for
laminate top with wood or softenedvinyl (V) rim only)
bn Reduce diameter: 30.000 = 30" dia. X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 31
Tables ■ Product Modifications
CONTEMPORARY/TRANSITIONAL
GSA SIN 711-11
Laminate with Number Wood Surface Wood Rim Laminate of Top Type 1 Type 2 Type 3 Type 2 Type 3 Type 1 Type 4Diameter H Pieces Model Rim Rim Rim Rim Rim Rim Rim
Round Table Tops
36" 19⁄16" 1 CCS36RD $924 $1744 $1853 $1744 $1853 $852 $852
Options:Description How to Specify Add $ to Price
Factory-installed grommet Specify grommet designator +$93 per grommet ➤See page 35.
Product Modifications:Description How to Specify Add/Deduct $
Reduce diameter (30") Specify 30.000 in step bm. No charge
Rim Profiles:Type 1—Applies to all wood or alllaminate tops only.
J Flat
Type 2—Applies to wood andlaminate with wood rim tops only.
A Radius B Bevel C Dbl. Rad.
D Bullnose E Transitional F Softened
G Beaded H Crescent M Reed
Type 3—Applies to wood andlaminate with wood rim tops only.
CH Chamfer RS Rv. Knife S Knife
Type 4—Applies to laminate tops.
V Softened vinyl
Rectangular Table Tops
How to Specify
! Add M to beginning of model @ Model# Material: W = Wood LW = Laminate with wood rim
L = Laminate $ Rim type: 1 = J rim 2 = A, B, C, D, E, F, G, H, or M rim 3 = CH, RS, or S rim 4 = V rim (laminate top only)5 Finish option (include for wood
top only): R = Rubbed N = Non-rubbed6 Rim profile: ➤See options at left.7 Cut-out or grommet option: ➤See page 34 for cut-out options.
➤See page 35 for grommet options. X = Without cutouts or grommets8 Surface finish price group: STD = Group 1 STD2 = Group 2 (+20%)9 Surface finish designatorbl Rim finish price group (include for
laminate top with wood rim only): STD = Group 1 STD2 = Group 2 (+20%)bn Rim finish designator (include for
laminate top with wood or softenedvinyl (V) rim only)
bo Reduced depth: ➤See modifications at left. X = No modificationbp Reduced width: ➤See modifications at left. X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 32
Tables ■ Product Modifications
CONTEMPORARY/TRANSITIONAL
GSA SIN 711-11
Laminate with Number Wood Surface Wood Rim Laminate of Top Type 1 Type 2 Type 3 Type 2 Type 3 Type 1 Type 4D W H Pieces Model Rim Rim Rim Rim Rim Rim Rim
Rectangular Table Tops
36" 72" 19⁄16" 1 CCS3672RT $1741 $2825 $2965 $2825 $2965 $1550 $1550
48" 96" 1 CCS4896RT 2509 3918 4122 3918 4122 2211 2211
120" 2 CCS48120RT 3522 5222 5483 5222 5483 3079 3079
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth on 36"D (nom.) model Specify 30.000 in step bm. No charge
Reduce depth on 48"D (nom.) x Specify 42.000 in step bm. No charge96"W (nom.) model
Reduce width on 72"W (nom.) model Specify 60.000 or 66.000 in step bn. No charge
Reduce width on 96"W (nom.) model Specify 60.000, 66.000, 72.000, 78.000, 84.000, or No charge 90.000 in step bn.
Reduce width on 120"W (nom.) model Specify 108.000 in step bn. No charge
Options:Description How to Specify Add $ to Price
Factory-installed power/data cutout(s) Specify cut-out option designator +$59 per cut-out ➤See page 34.
Factory-installed grommet(s) Specify grommet designator +$93 per grommet ➤See page 35.
Racetrack Table Tops
How to Specify
! Add M to beginning of model @ Model# Material: W = Wood LW = Laminate with wood rim
L = Laminate $ Rim type: 1 = J rim 2 = A, B, C, D, E, F, G, H, or M rim 3 = CH, RS, or S rim 4 = V rim (laminate top only)5 Finish option (include for wood
top only): R = Rubbed N = Non-rubbed6 Rim profile: ➤See options at left.7 Cut-out or grommet option: ➤See page 34 for cut-out options.
➤See page 35 for grommet options. X = Without cutouts or grommets8 Surface finish price group: STD = Group 1 STD2 = Group 2 (+20%)9 Surface finish designatorbl Rim finish price group (include for
laminate top with wood rim only): STD = Group 1 STD2 = Group 2 (+20%)bn Rim finish designator (include for
laminate top with wood or softenedvinyl (V) rim only)
bo Reduced depth: ➤See modifications at left. X = No modificationbp Reduced width: ➤See modifications at left. X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 33
Tables ■ Product Modifications
CONTEMPORARY/TRANSITIONAL
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth on 36"D (nom.) model Specify 30.000 in step bm. No charge
Reduce depth on 48"D (nom.) x Specify 42.000 in step bm. No charge96"W (nom.) model
Reduce width on 72"W (nom.) model Specify 60.000 or 66.000 in step bn. No charge
Reduce width of 96"W (nom.) model Specify 60.000, 66.000, 72.000, 78.000, 84.000, or No charge 90.000 in step bn.
Reduce width of 120"W (nom.) model Specify 108.000 in step bn. No charge
Laminate with Number Wood Surface Wood Rim Laminate of Top Type 1 Type 2 Type 3 Type 2 Type 3 Type 1 Type 4D W H Pieces Model Rim Rim Rim Rim Rim Rim Rim
Ractrack Table Tops
36 " 72" 19⁄16" 1 CCS3672RC $1741 $3392 $3569 $3392 $3569 $1550 $1550
48" 96" 1 CCS4896RC 2509 4591 4824 4591 4824 2211 2211
120" 2 CCS48120RC 3522 5545 5825 5545 5825 3079 3079
Rim Profiles:Type 1—Applies to all wood or alllaminate tops only. 60"D wood topswith J rim are actually 585/8"D.
J Flat
Type 2—Applies to wood andlaminate with wood rim tops only.
A Radius B Bevel C Dbl. Rad.
D Bullnose E Transitional F Softened
G Beaded H Crescent M Reed
Type 3—Applies to wood andlaminate with wood rim tops only.
CH Chamfer RS Rv. Knife S Knife
Type 4—Applies to laminate tops.
V Softened vinyl
Options:Description How to Specify Add $ to Price
Factory-installed power/data cutout(s) Specify cut-out option designator +$59 per cut-out ➤See page 34.
Factory-installed grommet(s) Specify grommet designator +$93 per grommet ➤See page 35.
GSA SIN 711-11
Kimball Page 34
Tables ■ Product Modifications
Technology ManagementPower/Data Cut-Out Options
Factory-installed C2 cut-outs are sized to fit 10"power/data centers (modelKCU0810ELPDC andKCU0810ELPDCH), specifiedseparately.
Factory-installed C3 cut-outs are sized to fit 40"power/data centers (modelKCU0840ELPDC), specifiedseparately.
How to Specify
Insert the locationdesignator for step 6 in thetable top's model numbersequence.
Note: G10 grommets cannot bespecified along with C2 or C3power/data cutouts.
CONTEMPORARY/TRANSITIONAL
Top Size Cut-Out Location Designators Location of Cut-Outs
36" x 72" C2E = One C2 cut-out, end location 48" x 96" C2A = Two C2 cut-outs, both end locations C3C = One C3 cut-out, center location X = No cut-outs
48" x 120" C2C = One C2 cut-out, center location 48" x 144" C2E = One C2 cut-out, end location48" x 168" C2LR = Two C2 cut-outs, left and right end locations48" x 192" C2CE = Two C2 cut-outs, center and end locations C2A = Three C2 cut-outs, center and both end locations C3C = One C3 cut-out, center location C2LRC3C = Two C2 cut-outs, left and right end locations;
and one C3 cut-out, center location X = No cut-outs
48" x 216" C2C2 = Two C2 cut-outs, both inside/center locations 48" x 240" C2E2 = Two C2 cut-outs, both outside/end locations C2A = Four C2 cut-outs, all inside/center and outside/end locations C3C = One C3 cut-out, center location C2LRC3C = Two C2 cut-outs, left and right end locations;
and one C3 cut-out, center location X = No cut-outs
60" x 144" C2C = One C2 cut-out, center location 60" x 168" C2E = One C2 cut-out, end location60" x 192" C2LR = Two C2 cut-outs, left and right end locations C2CE = Two C2 cut-outs, center and end locations C2A = Three C2 cut-outs, center and both end locations C3C = One C3 cut-out, center location C2LRC3C = Two C2 cut-outs, left and right end locations;
and one C3 cut-out, center location X = No cut-outs
60" x 216" C2C2 = Two C2 cut-outs, both inside/center locations 60" x 240" C2E2 = Two C2 cut-outs, both outside/end locations C2A = Four C2 cut-outs, all inside/center and outside/end locations C3C = One C3 cut-out, center location C2LRC3C = Two C2 cut-outs, left and right end locations;
and one C3 cut-out, center location X = No cut-outs
36" x 72"
18"
18"18"
48" x 96"
24"
24"24"
48" x 96"
24"
2
Centered
C
24"
24"24"
24"
24"24"
24"
24"24"
873⁄4" 873⁄4"
24"
24"24"
Centered
30"
30"30"
30"
30"30"
C
30"
873⁄4" 873⁄4"
30"30"
30"
30"30"
Centered
Kimball Page 35
Tables ■ Product Modifications
Technology ManagementGrommet Options
Factory installed G10grommets may be specified onall table tops in pre-determinedlocations.Grommets are matte blackplastic.
How to Specify
Insert the locationdesignator for step 6 in thetable top's model numbersequence.
Note: G10 grommets cannot bespecified along with C2 or C3power/data cutouts.
Related Product
Round power/communication grommetis available for field installationinto a standard grommetopening to provide power,voice, or data directly to thetable top. It includes two poweroutlets, one RJ11 voice jack,and one RJ45 data jack.➤See the Perk chapter in theKimball Desks & AccessoriesPrice List.
CONTEMPORARY/TRANSITIONAL
Top Size Cut-Out Location Designators Location of Cut-Outs
Round G10C = One G10 grommet, center location X = No grommets
Square G10C = One G10 grommet, center location X = No grommets
36" x 72" G10C = One G10 grommet, center location 48" x 96" G10E = One G10 grommet, end location48" x 120" G10LR = Two G10 grommets, left and right end locations 48" x 144" G10CE = Two G10 grommets, center and end locations48" x 168" G10A = Three G10 grommets, center and end locations 48" x 192" X = No grommets
48" x 216" G10C2 = Two G10 grommets, both inside center locations 48" x 240" G10E2 = Two G10 grommets, both outside end locations G10A = Four G10 grommets, all center and end locations X = No cut-outs
60" x 144" G10C = One G10 grommet, center location 60" x 168" G10E = One G10 grommet, end location60" x 192" G10LR = Two G10 grommets, left and right end locations G10CE = Two G10 grommets, center and end locations G10A = Three G10 grommets, center and end locations X = No grommets
60" x 216" G10C2 = Two G10 grommets, both inside center locations 60" x 240" G10E2 = Two G10 grommets, both outside end locations G10A = Four G10 grommets, all center and end locations X = No cut-outs
18"
18"18"
24"
24"24"
873⁄4" 873⁄4"
30"
30"30"
30"
873⁄4" 873⁄4"
30"30"
24"
24"24"
Increased diameter (54" or 60"W)top requires a Queen Anne basewith an increased mounting pad.
Round Table Tops
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator4 Reduce diameter: X = No modification5 Increase diameter: 54.000 = 54" dia. (+$, availableon 48” diameter tops only)
60.000 = 60" dia. (+$, availableon 48” diameter tops only)
X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 36
Tables ■ Product Modifications
TRADITIONALGSA SIN 711-11
Arm Chair Number of Standard D W H Clearance Bases Required Model Price
Round
48" diameter 11⁄16" 28" 1 TT2-48W $3390
Product Modifications:Description How to Specify Add/Deduct $
Increase diameter to 54" Specify 54.000 in step 5 +$867
Increase diameter to 60" Specify 60.000 in step 5 +$1324
Reduced depth (36"D) toprequires a reduced depth (19"D)panel base.
Rectangular Table Tops
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator4 Reduced depth: 36.000 = 36"D X = No modification5 Reduced width: 72.000 = 72"W 84.000 = 84"W X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 37
Tables ■ Product Modifications
TRADITIONALGSA SIN 711-11
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth Specify 36.000 in step 4. No charge
Reduce width Specify 72.000 or 84.000 in step 5. No charge
Arm Chair Number of Standard D W H Clearance Bases Required Model Price
Rectangular
42" 96" (8') 31⁄4" 267⁄8" 2 TT3-4296W $3822
Reduced depth (36"D) toprequires a reduced depth (19"D)panel base.
Boat-Shaped Table Tops
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator4 Reduced depth: 36.000 = 36"D X = No modification5 Reduced width: 72.000 = 72"W 84.000 = 84"W X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 38
Tables ■ Product Modifications
TRADITIONALGSA SIN 711-11
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth Specify 36.000 in step 4. No charge
Reduce width Specify 72.000 or 84.000 in step 5. No charge
Arm Chair Number of Standard D W H Clearance Bases Required Model Price
Boat-Shaped
42" 96" (8') 33⁄4" 267⁄8" 2 TT1-4296W $4882
Wood Panel Bases
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator4 Reduced depth: 19.000 = 19"D (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 39
Tables ■ Product Modifications
TRADITIONALGSA SIN 711-11
Base H Width Standard Model Price
Without Molding
281⁄4" 25" TB1-2530W $639
With Molding
281⁄4" 25" TB1-2530WM $889
Product Modifications:Description How to Specify Add/Deduct $
Reduce depth to support 36”D Specify 19.000 in step 4 +$294boat-shaped and rectangular tops
Wood Queen Anne Bases
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator4 Mounting pad modification: 54 = for use with 54" diametertops (+$)
60 = for use with 60" diametertops (+$)
X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 40
Tables ■ Product Modifications
TRADITIONALGSA SIN 711-11
Base H Width Standard Model Price
Queen Anne Bases
281⁄4" 351⁄4" TB1-4W $2286
Product Modifications:Description How to Specify Add/Deduct $
Increase mounting pad and Specify 54 for use with 54" diameter tops +$409and stabilize base to support or 60 for use with 60" diameter tops in step 4
larger diameter tops
Modified Innsbruck top requires amodified Innsbruck base with anadjusted mounting pad thatcorresponds to the modified topsize; specified separately.
Round Table Tops
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator MC = Amber Cherry4 Change diameter: 42.000 = 42" dia. 54.000 = 54" dia. (+$) 60.000 = 60" dia. (+$) X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 41
Tables ■ Product Modifications
INNSBRUCKGSA SIN 711-11
Number of Diameter H Bases Required Model Price
Round Table Top
48" 33⁄4" 1 IN48RD $4993
Product Modifications:Description How to Specify Add/Deduct $
Reduce diameter to 42" Specify 42.000 in step 4 for top No charge
Increase diameter to 54" Specify 54.000 in step 4 for top +$623
Increase diameter to 60" Specify 60.000 in step 4 for top +$4365
Wood Table Bases
How to Specify
! Add M to beginning of model 2 Finish price group: STD = Group 13 Finish designator MC = Amber Cherry4 Mounting pad modification: 42 = for use with 42" diametertops
54 = for use with 54" diametertops (+$)
60 = for use with 60" diametertops (+$)
X = No modification
➤See the Kimball Legacy Price List for product information, finishes and materials, and related products.
Kimball Page 42
Tables ■ Product Modifications
INNSBRUCKGSA SIN 711-11
Lower Platform Upper Platform D W H Diameter Model Price
Pedestal Base29" 29" 2913⁄16" 413⁄4" IN2930C $2503
Product Modifications:Description How to Specify Add/Deduct $
Adjust size of upper platform Specify 42 in step 4 for base No chargefor use with 42" diameter top
Adjust size of upper platform Specify 54 in step 4 for base +$648for use with 54" diameter top
Adjust size of upper platform Specify 60 in step 4 for base +$1138for use with 60" diameter top
P R O D U C T M O D I F I C A T I O N S G S AF E D E R A L G O V E R N M E N T C O N T R A C T G S - 0 3 F - 0 5 9 D A E F F E C T I V E 0 3 . 1 4 . 2 0 1 9
800.482.1818kimball.com
1600 Royal Street Jasper, Indiana 47546
A unit of Kimball International©2019 Kimball International, Inc. Form No. PLGSAPRODMOD ver. 0319
Products on contract are noted with appl icable
Specia l I tem Number (SIN) ; i tems not on contract
are noted as non-contract .
Product deta i ls and other data are subject to
change without not ice.
Genera l Serv ices Administrat ion
Federa l Supply Serv ice
Author ized Federa l Supply Schedule
Onl ine access to contract order ing informat ion terms
and condi t ions,up-to-date pr ic ing, and the opt ion to
create an e lectronicdel ivery order is ava i lab le through
GSA Advantage!™,a menu-dr iven database system.
The internet address for GSA Advantage!™ is :
gsaadvantage.gov
Office Furn i ture
FSC Group 71
FSC Class(es) / Product Code(s) : 71
Serv ice Code(s) : 7110
Contract Number:
GS-03F-059DA February 11, 2021
Business Size: Large
Contractor:
Kimbal l Internat ional , Inc.
1600 Royal Street
Jasper, IN 47546
Telephone : 800.647.2010
Fax : 812.481.6174
k imbal l .com