GSE Electric

8/10/2019 GSE Electric

1/46

Cableado Estructurado

Catlogo de ProductosCatlogo de Productos

Control del Acceso

Sistema de Circuito Cerrado

Cables Especiales


2/46

Nuestra empresa se dedica a la solucin de sus necesidades por medio de productos de alta calidad y marcas

econocidas en el mercado americano.

Adems somos una empresa slida en el mercado que contamos con una amplia cartera de productos en las

elecomunicaciones, fibra ptica, cables especiales.

Quienes Somos?

Somos distribuidores directos de materiales de reconocidas marcas

Central Telefonica: (506) 2244-7555


3/46


4/463 Central Telefonica: (506) 2244-7555 [email protected] Centro Comercial Heredia 2000 Bodega # 27

pplications: Wiring Burglar Alarm, Public Address Systems, Intercoms, Telephone Stations, Speakers, Instru-

mentation, Control and other Low Voltage Circuits that are Power-Limited. Sunlight Resistant.

ode Restrictions: OK for use with all Power-Limited Circuits except those in Risers and Plenums.

eatures: Available In 500 foot or 1000 foot Tangle-Free Boxes or Spools. Sequential Footage Markings.

onstruction: Twisted Copper Conductors, Polypropylene Insulation, Aluminum/Mylar Shield, with Drain Wire,

exible Polyvinyl-Chloride Jackets. Standard Jacket Color: Gray. Conductor Color Code Chart 1 (up to 12 con-

uctors).

Jacketed Cables Shielded (Overall Shield)

www.gseelectric.com


5/46


6/46


7/466Central Telefonica: (506) 2244-7555 [email protected] Centro Comercial Heredia 2000 Bodega # 27

pplications: Wiring for Outdoor or Underground. Sunlight Resistant.

ode Restrictions: OK for use with all Power-Limited Circuits except those in Risers and Plenums, but intended

r Outdoor or Underground Use.

eatures: Available in 500 foot or 1000 foot Spools.Sequential Footage Markings.

onstruction:Stranded Copper Conductors, PVC Insulation, High Molecular Weight PVC Jacket Color: Black.

onductor Color Code Chart 4. Color Code Chart 2 (13 conductors and over).

pplications: Wiring of Fire-Protective Signaling Circuits. Sunlight Resistant.

ode Restrictions: OK for use with all Power-Limited Circuits except those in Plenums.

eatures: Available In 500 foot or 1000 foot Tangle-Free Boxes or Spools. Sequential Footage Markings.

onstruction: Copper Conductors, Polypropylene Insulation, Polyvinyl-Chloride Jacket. Standard Jacket Color:

ed or White, Conductor Color Code Chart 4.

Fire Alarm Jacketed Unshielded

Direct Burial

www.gseelectric.com

re Alarm Jacketed (Overall Shield), Riser Rated



pplications:High-End Audio Transmission, Stereo, Professional Sound and Studio Requirements.


eatures: Available in 500 foot or 1000 foot Spools. One Conductor Ribbed for Polarity.

onstruction: Copper Conductors, Super Flexible Polyvinyl-Chloride Jacket. Standard Jacket Color: Clear.

pplications: High-End Audio Transmission, Stereo, Professional Sound and Studio Requirements. Sunlight

esistant.


eatures: Available in 500 foot or 1000 foot Tangle-Free Boxes or Spools. Sequential Footage Markings.

onstruction: Twisted Copper Conductors, Polypropylene Insulation, Super Flexible Polyvinyl-Chloride Jacket.

tandard Jacket Colors: Blue, Green, White, Yellow, Purple. Conductor Color Code Chart 1.

HOME THEATER CABLESHeavy Duty Zip Cable-Clear, Oxygen Free

www.gseelectric.com

Heavy Duty Zip Cable-Clear, Oxygen Free



pplications: High-End Audio Transmission, Stereo, Professional Sound and Studio Requirements. Sunlight

esistant.

ode Restrictions: OK for Power-Limited Circuits, except those in Risers and Plenums.

eatures: Available on 500 foot or 1000 foot Spools, 500 foot Tangle-Free Box or Reel-in-a Box Wire Dispensing

ystem. Sequential Footage Markings. Legend markings for channels, rooms and zones to save installation

me.

onstruction: High-Strand Oxygen Free Copper Conductors. Super Flexible Polyvinyl-Chloride Jacket.

pplications: Voice, 10/100 Mb/S Ethernet, 4/16 Mb/S Token Ring, FDDI TP-PMD, 155 Mb/S ATM and Gigabit

hernet. Sunlight Resistant.

ode Restrictions: Intended for Conduit or Wet Location Applications.

eatures: Available in 500 foot or 1000 foot Reels.

onstruction:UTP Cables are Unshielded Twisted Pair Cables with a Nominal Impedance of 100 ohms. Jacket

olors: Black.

Audacious Sound Oxygen Free and

Combination Sound

www.gseelectric.com

Voice & Data Water Resistant Category 5e


10/46

pplications: Voice, 10/100 Mb/S Ethernet, 4/16 Mb/S Token Ring, FDDI TP-PMD,155 Mb/S ATM and Gigabit

thernet.

ode Restrictions: OK for Power-Limited Circuits.

eatures: Available in 1000 foot Speed Box Wire Dispensing System. Ripcord and Sequential Footage Mark-

ngs.

onstruction: UTP Cables are Unshielded Twisted Pair Cables With A Nominal Impedance of 100 Ohms. Stand-

rd Jacket Colors are White, Blue, Gray. Conductor Color Code Chart 5.

Maximum Attenuation at 100 MHz: 22 db/100 M Minimum PSNEXT at 100 MHz: 32 db

9 Central Telefonica: (506) 2244-7555 [email protected] Centro Comercial Heredia 2000 Bodega # 27

www.gseelectric.com

Voice & Data Category 5e, Plenum

Satellite & Digital Coaxial Cable

pplications:Designed for High End Broadband Signal Transmission for satellite use. Fully swept tested to 3

Hz. Sunlight Resistant.

ode Restrictions: OK for General Purpose use except in Risers and Plenums.

eatures: Available on 500 foot or 1000 foot Reel, or 500 foot or 1000 foot Speed Boxes or 500 foot Reel-in-a-ox Wire Dispensing System. Sequential Footage Markings.

onstruction: Foamed Dielectric over Solid Copper Clad Steel or Bare Copper Center Conductors. Quad

luminum/Foil-Aluminum/Braid Shields. Standard Jacket Colors are Black or White.



pplications: Audio/Video, Radio Frequency, and CCTV Transmissions. Sunlight Resistant.

ode Restrictions: OK for General Purpose use except in Risers and Plenums.

eatures: Available In 500 foot or 1000 foot Tangle-free Boxes or Spools, or 500 foot Reel-in-a-Box Wire

spensing System. Sequential Footage Markings.

onstruction: Foamed Dielectric Cores Over Solid Copper Conductors with Bare Copper Braid Shield. Standard

cket Colors: Black, White.

Coaxial Cable, Baseband

www.gseelectric.com



www.gseelectric.com


13/46



www.gseelectric.com


20/46


21/46


22/46



www.gseelectric.com

PACH PANEL CAT 6 DE 24 PUERTOS

ACH PANEL MODULAR DE 48

ACH PANEL MODULAR DE 24 PUERTOS



www.gseelectric.com

PLACA PLASTICA DE 2 PUERTOS PLASTICA

MODULO CIEGO PAQUETE DE 10

PACH CORD DE 3 PIES CAT 6 AZUL PAQUET DE 10 PACH CORD



www.gseelectric.com

PACH CORD DE 3 PIES CAT 6 ROJO PAQUET DE 10 PACH CORD

PACH CORD DE 5 PIES CAT 6 COLOR AZUL PAQUETE DE 10

PACH CORD DE 5 PIES CAT 6 COLOR ROJO PAQUETE DE 10


26/46


27/46



www.gseelectric.com

ACK DE 2 POSTES 7 PIES X 19".

BARRA DE TIERRAS PARA MONTAJE EN RACK.



www.gseelectric.com

CABLE UTP CAT5E CMR COLOR GRIS

-

ABLE UTP CAT5E CMR

Specifications

Pair Count 4

Conductor Solid annealed copper

AWG (mm)24 (0.51)

nsulation Thermoplastic

nsulation Colors

Pair 1: ColorTipLight Blue, Blue

Pair 2: ColorTip Light Orange, OrangePair 3: ColorTip Light Green, GreenPair 4: ColorTip Light Brown, Brown

acketCMR: Flame retardant (FR) PVCCMP: FR, low smoke PVC

Characteristic Impedance (Ohms) 100 15

Nominal Velocityof Propagation (%)

CMR: 71CMP: 74

Performance Compliance

UL 444CSA C22.2 No. 214-08UL 1666NFPA 262ANSI/TIA-568-C.2

RoHS-compliant

NRTL ProgramsUL Verified CAT 5eUL, c(UL) Listed CMRUL, c(UL) Listed CMP

Part Numbers and Physical Characteristics

Listing Part NumberNominal Diameter

in (mm)Approx. Weightlbs/kft (kg/km) Package Packages Per Pallet

CMR 51-243-x5 0.18 (4.6) 17 (25) 1,000' Reel-in-a-Box 45

CMR 51-240-x5 0.18 (4.6) 17 (25) 1,000' POP Box 45

CMP 51-243-x8 0.19 (4.8) 20 (30) 1,000' Reel-in-a-Box 45

CMP 51-241-x8 0.19 (4.8) 20 (30) 1,000' POP Box 45

Solid AnnealedCopper Conductor

Thermoplastic Insulation

Flame Retardant PVC Jacket



www.gseelectric.com

ABLE UTP CAT6 OSP COLOR NEGRO PARA EXTERIORES

CABLE UTP CAT 6 CMR

Specifications

air Count 4


AWG (mm) 23 (0.57)

nsulationCMR: PolyolefinCMP: FEP

nsulation Colors


Pair 2: ColorTip Light Orange, OrangePair 3: ColorTip Light Green, GreenPair 4: ColorTip Light Brown, Brown

acketCMR: Flame retardant (FR) PVCCMP: FR, low smoke PVC

Characteristic Impedance (Ohms) 100 15Nominal Velocityof Propagation (%)

CMR: 71CMP: 74

erformance Compliance

UL 444CSA C22.2 No. 214-08UL 1666NFPA 262ANSI/TIA-568-C.2RoHS-compliant

NRTL ProgramsUL Verified CAT 6UL, c(UL) Listed CMRUL, c(UL) Listed CMP

Product DescriptionSuperior Essex Series 77 product line provides exceptional value for jobs

that require standards compliant Category 6 cable at a cost-effective price.

Applications 10BASE-T through 1000BASE-T Ethernet

ATM and token ring

Features Benefits Meets ANSI/TIA-568-C.2

specification

Provides cost effective solution

BrakeBoxpayout

control system Adjustable tension control on reel

prevents over spin and entanglingof cable

CableIDalpha numeric code

printed every 2 feet Allows both ends of a cable run

to be easily identifiable withoutthe need to seperately label ortone the cable

QuickCountmarking system

in feet and meters Provides remaining length

of cable on reel

ColorTipcircuit

identification system Easily identifiable conductor

mates even in low-lightenvironments

Color coded box labels Easily identifies jacket colors



in (mm)Approx. Weightlbs/kft (kg/km) Package Packages Per Pallet

CMR 77-246-xA 0.22 (5.5) 24 (36) 1,000' BrakeBox

27

CMR 77-272-xA 0.22 (5.5) 24 (36) 1,000' Plywood Reel 16

CMR 77-240-xA 0.22 (5.5) 24 (36) 1,000' POPBox 20

CMP 77-246-xB 0.22 (5.5) 25 (37) 1,000' BrakeBox 27

CMP 77-272-xB 0.22 (5.5) 25 (37) 1,000' Plywood Reel 16

CMP 77-240-xB 0.22 (5.5) 25 (37) 1,000' POP Box 20

Sunlight and Weather ResistantPolyethylene Jacket

Sunlight and Weather ResistantPolyethylene Outer Jacket

Polyethylene Inner Jacket

PFM Gel-filled, Water-Repellent Core



PFM Gel-filled, Water-Repellent Core

Solid Annealed Copper Conductor


Aluminum Tape Shield (BBDN6) orCopper-clad Steel Armor (BBDG6)

Cross-web Separator

Cross-web Separator

Applications 10BASE-T through 1000BASE-T Ethernet

ATM and tokenring BBDN6: Lashed aerial, undergroundconduitor low-risk direct burial

BBDG6: Direct burial where additionalmechanical protectionis required



www.gseelectric.com

METRO DE CABLE 25 PARES TELEFONICO EXTERIOR

Specifications

onductor Solid annealed copper

WG (mm) Available in 19 (0.90), 22 (0.64), 24 (0.51) and 26 (0.40)

sulationDual insulation consisting of an inner layer of foamed, natural

polyolefin over which is applied a solid (skin) layer ofpolyolefin colored in accordance with industry standards

wisted PairsIndividual insulated conductors; twisted into pairs with

varying lay lengths; specific color combinations providepair identification

25-Pair Core Pairs are assembled into a cylindrical core

25-Pair CoreCables larger than 25-pair are assembled into units, which

are then used to assemble the core; units are identifiableusing color-coded binders

lling Compound 80C ETPR compound, completely filling the intersticesbetween the pairs and under the core wrap

ore Wrap Non-hygroscopic, dielectric tape applied over the core

hield Corrugated, copolymer coated, 8 mil aluminum tape appliedlongitudinally with an overlap; flooded shield interfaces

cket Black, polyethylene

cket MarkingIdentifying information includes a telephone handset,

cable code, pair count, AWG, date of manufactureand sequential length markings at 2 foot intervals

andardsompliance

ANSI/ICEA S-84-608-2007RDUP 7 CFR 1755.890 (PE-89)

RoHS-compliant

Product DescriptionSEALPIC

-FSF Cables are designed for low risk direct burial or duct

applications where protection from moisture is required and aluminum

shielding is desired. SEALPIC-FSF may be used aerially, but must be

attached to a support strand.

Applications Low risk direct burial

Undergroundconduit

Lashed aerial

Features Benefits Twisted into pairs with varying

lay lengths Minimizes crosstalk

Core wrap Provides thermal protection

Filled core Moisture resistant

Fully flooded shield interfaces Inhibits corrosionand water migration

Black, polyethylene jacket Provides a tough, protectivecovering designed to withstandexposure to direct sunlight,atmospheric temperaturechanges and stresses expected

in standard installations

Electrical Specifications

Number of Pairs

Average MutualCapacitance @ 1000 Hz

nF/mile (nF/km)

Capacitance UnbalancePair to Pair @ 1 kHz

Capacitance UnbalancePair to Ground @ 1 kHz

Maximum IndividualpF @ 1 kft (pF @ 1 km)

Maximum RMSpF @ 1 kft (pF @ 1 km)

Maximum IndividualpF @ 1 kft (pF @ 1 km)

Maximum AveragepF @ 1 kft (pF @ 1 km)

12 or less 83 7 (52 4) 80 (145) - 800 (2,625) -

Over 12 83 4 (52 2) 80 (145) 25 (45) 800 (2,625) 175 (574)

Conductor SizeAWG (mm)

Minimum Insulation

Resistance @ 68F (20C)gigohm-mile (gigohm-km)

Maximum AverageAttenuation*

772 kHz @ 68F (20C)dB/kft (dB/km)

Maximum ConductorResistance @ 68F (20C)

Ohms/sheathmile (km)

DC ResistanceUnbalance Maximum %

Dielectric StrengthDC Potential Volts

Average IndividualPair Conductorto Conductor Conductorto Shield

19 (0.90) 1.0 (1.6) 3.2 (10.5) 45.0 (28.0) 1.5 5.0 4,500 10,000

22 (0.64) 1.0 (1.6) 4.5 (14.8) 91.0 (56.5) 1.5 5.0 3,600 10,000

24 (0.51) 1.0 (1.6) 5.6 (18.4) 144.0 (89.5) 1.5 5.0 3,000 10,000

26 (0.40) 1.0 (1.6) 7.0 (23.3) 232.0 (144.0) 1.5 5.0 2,400 10,000

or cables with 12-pair or less, the maximum average attenuation may be increased by 10% over the values shown.

Minimum Near End Crosstalk(NEXT) @ 772 kHz

PSWUNEXT Mean (dB) 47

PSWUNEXT Worst Pair (dB) 42

Minimum Far End Crosstalk(FEXT) @ 772 kHz

Conductor Size (AWG) 19 22 24 26

PSELFEXT Mean (dB/kft) 51 49 49 47

PSELFEXT Worst Pair (dB/kft) 45 43 43 43



www.gseelectric.com

SEALPICFSF (RDUP PE-89)

Specifications


AWG (mm) Available in 19 (0.90), 22 (0.64), 24 (0.51) and 26 (0.40)

nsulationDual insulation consisting of an inner layer of foamed, natural

polyolefin over which is applied a solid (skin) layer ofpolyolefin colored in accordance with industry standards

Twisted PairsIndividual insulated conductors; twisted into pairs with

varying lay lengths; specific color combinations providepair identification

25-Pair Core Pairs are assembled into a cylindrical core

> 25-Pair Core

Cables larger than 25-pair are assembled into units, which

are then used to assemble the core; units are identifiableusing color-coded binders

Filling Compound80C ETPR compound, completely filling the interstices

between the pairs and under the core wrap

Core Wrap Non-hygroscopic, dielectric tape applied over the core

ShieldCorrugated, copolymer coated, 8 mil aluminum tape applied

longitudinally with an overlap; flooded shield interfaces

Jacket Black, polyethylene

Jacket MarkingIdentifying information includes a telephone handset,

cable code, pair cou nt, AWG, date of manufactureand sequential length markings at 2 foot intervals

StandardsCompliance

ANSI/ICEA S-84-608-2007RDUP 7 CFR 1755.890 (PE-89)RoHS-compliant

Product DescriptionSEALPIC

-FSF Cables are designed for low risk direct burial or duct

applications where protection from moisture is required and aluminum

shielding is desired. SEALPIC-FSF may be used aerially, but must be

attached to a support strand.

Applications Low risk direct burial

Undergroundconduit Lashed aerial

Features Benefits Twisted into pairs with varying

lay lengths Minimizes crosstalk

Core wrap Provides thermal protection

Filled core Moisture resistant

Fully flooded shield interfaces Inhibits corrosionand water migration

Black, polyethylene jacket Provides a tough, protectivecovering designed to withstandexposure to direct sunlight,atmospheric temperaturechanges and stresses expectedin standard installations

Electrical Specifications

Number of Pairs

Average MutualCapacitance @ 1000 Hz

nF/mile (nF/km)

Capacitance UnbalancePair to Pair @ 1 kHz

Capacitance UnbalancePair to Ground @ 1 kHz

Maximum IndividualpF/kft (pF/km)

Maximum RMSpF/kft (pF/km)

Maximum IndividualpF/kft (pF/km)

Maximum AveragepF/kft (pF/km)

12 or less 83 7 (52 4) 80 (262) - 800 (2,625) -

Over 12 83 4 (52 2) 80 (262) 25 (82) 800 (2,625) 175 (574)

Conductor SizeAWG (mm)

Minimum Insulation

Resistance @ 68F (20C)gigohm-mile (gigohm-km)

Maximum AverageAttenuation*

772 kHz @ 68F (20C)dB/kft (dB/km)

Maximum ConductorResistance @ 68F (20C)

Ohms/sheathmile (km)

DC ResistanceUnbalance Maximum %

Dielectric StrengthDC Potential Volts

Average IndividualPair Conductorto Conductor Conductorto Shield

19 (0.90) 1.0 (1.6) 3.2 (10.5) 45.0 (28.0) 1.5 5.0 4,500 10,000

22 (0.64) 1.0 (1.6) 4.5 (14.8) 91.0 (56.5) 1.5 5.0 3,600 10,000

24 (0.51) 1.0 (1.6) 5.6 (18.4) 144.0 (89.5) 1.5 5.0 3,000 10,000

26 (0.40) 1.0 (1.6) 7.0 (23.3) 232.0 (144.0) 1.5 5.0 2,400 10,000

*For cables with 12-pair or less, the maximum average attenuation may be increased by 10% over the values shown.

Minimum Near End Crosstalk(NEXT) @ 772 kHz

PSWUNE XT Mean (dB) 47

PSWUNE XT Worst Pair (dB) 42

Minimum Far End Crosstalk

(FEXT) @ 772 kHzConductor Size (AWG) 19 22 24 26

PSELFEXT Mean (dB/kft) 51 49 49 47

PSELFEXT Worst Pair (dB/kft) 45 43 43 43



www.gseelectric.com

25-Pair Power Sum Category 5e CMR/CMP




Cylindrical Separator


Specifications

Pair Count 25


AWG (mm) 24 (0.51)

InsulationCMR: ThermoplasticCMP: FEP

Separator Cylindrical

JacketCMR: Flame retardant PVC

CMP: FluoropolymerPackage 1,000 plywood reel


Nominal Velocityof Propagation (%)

CMR: 69CMP: 72


UL 444UL 1666NFPA 262ANSI/TIA-568-C.2RoHS-compliant

NRTL ProgramsUL Verified CAT 5eUL Listed CMRUL Listed CMP

Product Description25-Pair Power Sum Category 5e UTP cables are designed to provide support

for both backbone and horizontal applications. These applications include

inter-closet backbone links, equipment cabling between cross-connect

and hub equipment and zone distribution horizontal cabling between wiring

elbaliavasielbacehT.stniopnoitisnartaerakrowelpitlumdnastesolc

stnemeriuqerllateemotdeifirevLUsidnasgnitarRMCdnaPMCni

of ANSI/TIA-568-C.2.

Applications 10BASE-T through 1000BASE-T ethernet, ATM and token ring

Features Benefits Small outside diameter Handles tight installations

Vibrant insulation colors Easier identification of conductors

Flexible jacket material Ease of use during installation

Marked in feet and meters

Dual length marking complieswith government, military andinternational requirements



in (mm)Approx. Weightlbs/kft (kg/km) Packages Per Pallet

CMR 51-478-x5 0.57 (14.5) 144 (214) 4

CMP 51-478-x8 0.48 (12.2) 148 (220) 4

Jacket Colors

Replace x with: Blue = 2 Gray = 3 White = 4



www.gseelectric.com

25-Pair Category 5e Indoor/Outdoor


PET Tape Core Wrap


Black, Low Smoke Zero Halogen,OSP Grade Jacket



Specifications

Pair Count 25


AWG (mm) 24 (0.51)

Insulation Thermoplastic

SeparatorsCylindrical, flame retardant

thermoplastic

Core Wrap PET Tape

Jacket Black, CM rated, non-halogenOSP grade

Input Impedance (Ohms) Guaranteed@ 1-100 MHz

100 15

Delay Skew (ns/100 m)Maximum: 45Typical: 30

Nominal Velocity of Propagation (%) 69

DC Resistance (Ohms/100 m)Maximum: 9.38Typical: 9.0

Resistance Unbalance (%)Maximum: 5.0Typical: 0.7

Performance ComplianceUL 444ANSI/TIA-568-C.2RoHS-compliant

Product DescriptionWith its CM fire rating and UV resistant black jacket, this 25-pair, 24 gauge,

Category 5e tight twisted copper conductor cable can be installed in both

premises and outside plant (OSP) environments. The CAT 5e tight twist lays

provide superior crosstalk performance, supporting digital subscriber line

(xDSL) and IPTV broadband technologies in both the OSP pedestal and

customer premises. In addition, the cable jacket is fungus resistant which

is important in OSP pedestal environments. The cable meets or exceeds

ANSI/TIA-568-C.2 for CAT 5e backbone cables and is able to support up to1000BASE-T Ethernet technologies.

Applications ADSL, VDSL, VDSL+ and VDSL+2

10BASE-T through 1000BASE-T Ethernet, ATM and token ring

Features Benefits Small outside diameter Handles tight installations

Vibrant insulation colors Easy identification of conductors

Black, CM rated, non-haolgen,OSP grade jacket material

Provides full sunlightresistance and fire protectionin a flexible jacket

Fungus resistance Non-nutritiveto fungus and

ideal for installation in humidenvironments

Compliantto ANSI/TIA-568-C.2for CAT 5e

Capable of 1000BASE-T

Specially designed tight twist lays Provides superior Alien Crosstalkperformance for xDSL applications

Low temperaturebend performance

Allows installationat -20C temperatures


Part Number

Nominal Diameter

in (mm)

Approx. Weight

lbs/kft (kg/km) Package51-499-EL 0.59 (15) 148 (221) 1,000' Plywood Reel



www.gseelectric.com

10Gain Category 6A CMR/CMP




Cross-web Separator

SpecificationsPair Count 4


AWG (mm) 23 (0.57)

Insulation CMR: PolyolefinCMP: FEP

Insulation Colors


Pair 2: ColorTip Light Orange, OrangePair 3: ColorTip LightGreen, GreenPair 4: ColorTip Light Brown, Brown

Separator Cross-web

JacketCMR: Flame retardant (FR) PVCCMP: FR, low smoke PVC

Package 1,000 plywood reel


Velocity of Propagation (%)CMR: 65CMP: 69


UL 444UL 1666NFPA 262ANSI/TIA-568-C.2RoHS-compliant

NRTL ProgramsUL Verified CAT 6AUL Listed CMRUL Listed CMP



in (mm)Approx. Weightlbs/kft (kg/km) Packages Per Pallet

CMR 6A-272-xA 0.35 (8.9) 51 (76) 12

CMP 6A-272-xB 0.32 (8.1) 49 (73) 12

Jacket ColorsReplace x with: Blue = 2 Gray = 3 White = 4 Green = 5 Yellow = 6 Purple = 7 Red = 9 Orange = D

Product Description10Gain cable brings Category 6A UTP performance to a new level. This

fostnemeriuqerecnamrofrepklat-ssorcneiladnalanretniehtsteemelbac

ANSI/TIA-568-C.2 as tested in a 6 around 1 configuration. With guaranteed

performance out to 500 MHz and independently verified and monitored by UL,

10Gain CAT 6A cable demonstrates superior capability for 10Gigabit Ethernetand all other bandwidth intensive and legacy applications.

Applications 10GBASE-T and legacy applications 10BASE-T through

1000BASE-T ethernet

ATM and token ring

Backward compatible to legacy protocols and applications

Features Benefits UL Verified CAT 6A Assures consistent, worry-free

performance

Tested to 650 MHz Assures ample bandwidthheadroom

Exceptional PSACR and PSAACRF(PSAELFEXT) performance

Performance assurance for10 Gigabit Ethernet and multiple

high-bandwidth applications CableID

alpha numeric code

printed every 2 feet Allows both ends of a cable run

to be easily identifiable withoutthe need to seperately label ortone the cable

QuickCountmarking system

in feet and meters Provides remaining length

of cable on reel

ColorTipcircuit

identification system Easily identifiable conductor

mates even in low lightenvironments


36/46



www.gseelectric.com

FireWarden-100-2(E)

SLC WireRequirements

Distance in Feet(m)

Wire Size Wire Type

Twisted-pair, unshielded 10,000 feet (3,048 m) 12 AWG (3.31 mm2)

Non-Plenum (FPLR):

Genesis 4315, Belden 5020UL

Plenum (FPLP):Genesis 4515, Belden 6020UL


Non-Plenum (FPLR):Genesis 4313, Belden 5120UL





Twisted-pair, unshielded 3,225 feet (983 m)18 AWG (0.821 mm

2

)



FireWarden-100-2 Wire Requirements


38/46



www.gseelectric.com

NFS2-640

Opciones delsistema demuestra

7111blok.wmf



www.gseelectric.com

NFS2-3030

CPU2-3030D CPU2-3030ND

NBG-12LX FMM-1 FRM-1

Impresora PRN

NFS2-3030

Opciones del sistema de muestra

FAPT-851

FSL-851

FSH-751

FSP-851

. ..etc.

se muestra en CAB-C4 con pantallaAudioDVC en CA-1 en la segunda hilera

7070blok.w

mf


41/46



www.gseelectric.com



www.gseelectric.com

Control de Acceso

Familia de pantallas tctiles grficas

Ventajas

Los grcos y las indicaciones con mens deTouchCenter guan al propietario de la casa en

todo momento, lo que permite una sencilla

operacin. Los usuarios nales utilizarn ms

el sistema, lo que aumentar la conservacin y

a satisfaccin de los clientes.

Luces de control, puertas de garaje yseleccin de aparatos con TouchCenter



www.gseelectric.com

Vista s uperior

0 1210

5

5

12

12

0

10

10

5

(m)

(m)

Ajustable en 45 g rados

Dedos co n

detecci n activa.

Ajustable en 45 g rados


45/46

www.gseelectric.com

Central Telefonica: (506) 2244-7555 [email protected] Centro Comercial Heredia 2000 Bodega # 27 44


46/46

Central Telefonica: (506) 2244-7555

Correo: [email protected]

Direccin: Centro Comercial Heredia 2000 Bodega # 27

Documents

GSE Electric