H3C S9500 Series Routing Switches Command Manualh17007. · H3C S9500 Series Routing Switches Command Manual ... (OSPFv3 area view) ... H3C S9500 Series Routing Switches Chapter 2

H3C S9500 Series Routing Switches

Command Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-08194H-20080520-C-2.03

Product Version: S9500-CMW520-R2132

Copyright 2007-2008, Hangzhou H3C Technologies Co., Ltd. and its licensors

All Rights Reserved

No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners.

Notice

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

To obtain the latest information, please access:

http://www.h3c.com

Technical Support

[email protected]

http://www.h3c.com

About This Manual

Related Documentation

In addition to this manual, each H3C S9500 Series Routing Switches documentation set includes the following:

Manual Description

H3C S9500 Series Routing Switches Installation Manual

It introduces the installation procedure, commissioning, maintenance and monitoring of the S9500 series routing switches.

H3C S9500 Series Routing Switches Operation Manual

It includes Product Overview, Access Volume, IP Service Volume, IP Routing Volume, IP Multicast Volume, MPLS VPN Volume, QoS ACL Volume, Security Volume, System Volume , OAA Volume and Acronyms.

Organization

H3C Command Manual is organized as follows:

Part Contents

00 Feature List and Command Index includes Feature List and Command Index.

01 Access Volume

includes Ethernet Interface Commands, POS Interface Commands, GVRP Commands, Link Aggregation Commands, Port Mirroring Commands, RPR Commands, Ethernet OAM Commands, MSTP Commands, VLAN Commands, QinQ Commands, BPDU Tunneling Commands, and Port Isolation Commands.

02 IP Services Volume

includes ARP Commands, DHCP Commands, DNS Commands, IP Addressing Commands, IP Performance Commands, UDP Helper Commands, IPv6 Basics Commands, Dual Stack Commands, Tunneling Commands, and Adjacency Table Command.

03 IP Routing Volume

includes IP Routing Table Display Commands, BGP Commands, IS-IS Commands, OSPF Commands, RIP Commands, Routing Policy Commands, Static Routing Commands, IPv6 BGP Commands, IPv6 IS-IS Commands, IPv6 OSPFv3 Commands, IPv6 RIPng Commands, and IPv6 Static Routing Commands.

Part Contents

04 IP Multicast Volume

includes Multicast Routing and Forwarding Commands, IGMP Snooping Commands, IGMP Commands, PIM Commands, MSDP Commands, IPv6 Multicast Routing, and Forwarding Commands, MLD Snooping Commands, MLD Commands, IPv6 PIM Commands, Multicast VLAN Commands.

05 MPLS VPN Volume

includes MPLS Basics Commands, MPLS TE Commands, VPLS Commands, MPLS L2VPN Commands, MPLS L3VPN Commands, MPLS Hybrid Insertion Commands, and GRE Commands.

06 QoS ACL Volume includes QoS Commands and ACL Commands.

07 Security Volume

includes 802.1x Commands, AAA, RADIUS HWTACACS Commands, MAC Authentication Commands, L3+NAT Commands, Password Control Commands, SSH2.0 Commands, and Portal Commands.

08 System Volume

includes GR Commands, VRRP Commands, HA Commands, Device Management Commands, NQA Commands, NetStream Commands, NTP Commands, RMON Commands, SNMP Commands, File System Management Commands, System Maintaining and Debugging Commands, Basic System Configuration Commands, Information Center Commands, User Interface Commands, MAC Address Table Management Commands, PoE Commands, and Clock Monitoring Commands.

09 OAA Volume includes OAP Module Commands and ACSEI Commands.

10 Unsupported Commands List of Unsupported Commands.

Conventions

The manual uses the following conventions:

I. Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

[ ] Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... } Alternative items are grouped in braces and separated by vertical bars. One is selected.


[ x | y | ... ] Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected.

{ x | y | ... } * Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.

[ x | y | ... ] * Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected.

& The argument(s) before the ampersand (&) sign can be entered 1 to n times.

# A line starting with the # sign is comments.

II. GUI conventions


< > Button names are inside angle brackets. For example, click .

[ ] Window names, menu items, data table and field names are inside square brackets. For example, pop up the [New User] window.

/ Multi-level menus are separated by forward slashes. For example, [File/Create/Folder].

III. Symbols


Warning Means reader be extremely careful. Improper operation may cause bodily injury.

Caution Means reader be careful. Improper operation may cause data loss or damage to equipment.

Note Means a complementary description.

Command Manual Feature List and Command IndexH3C S9500 Series Routing Switches Chapter 1 Feature List

1-1

Chapter 1 Feature List

The S9500 series support abundant features and the related documents are divided into the volumes as listed in Table 1-1.

Table 1-1 Feature list

Volume Features

Ethernet Interface POS Interface GVRP

Link Aggregation

Port Mirroring RPR Ethernet OAM MSTP Access Volume

VLAN QinQ BPDU Tunneling Port Isolation

ARP DHCP DNS IP Address

IP Performance UDP Helper IPv6 Basics Dual Stack IP Services Volume

Tunneling Adjacency Table

IP Routing Table Display Commands

BGP IS-IS OSPF

RIP Routing Policy Static Routing IPv6 BGP IP Routing Volume

IPv6 IS-IS IPv6 OSPFv3 IPv6 RIPng IPv6 Static Routing

Multicast Routing and Forwarding

IGMP Snooping IGMP PIM

MSDP IPv6 Multicast Routing and Forwarding

MLD Snooping MLD IP Multicast Volume

IPv6 PIM Multicast VLAN

MPLS Basics Commands MPLS TE VPLS MPLS L2VPN MPLS VPN

Volume MPLS L3VPN MPLS Hybrid Insertion GRE

QoS ACL Volume QoS ACL

Command Manual Feature List and Command IndexH3C S9500 Series Routing Switches Chapter 1 Feature List

1-2

Volume Features

802.1x AAA RADIUS HWTACACS MAC Authentication L3+NAT Security

Volume Password Control SSH2.0 Portal

GR VRRP HA Device Management

NQA NetStream NTP RMON

SNMP File System Management

System Maintenance and Debugging

Basic System Configuration Commands

Information Center User Interface

MAC Address Table Management

PoE

System Volume

Clock Monitoring

OAA Volume OAP Module ACSEI

Command Manual Feature List and Command IndexH3C S9500 Series Routing Switches Chapter 2 Command Index

2-1

Chapter 2 Command Index

The command index includes all the commands in the Command Manual, which are arranged alphabetically.

A B C D E F G H I J K L M N O P Q R S T U V W X

Y Z

A abr-summary (OSPF area view) OSPF Commands 1-1

abr-summary (OSPFv3 area view) IPv6 OSPFv3 commands 1-1

access-limit AAA RADIUS HWTACACS Commands

1-1

accounting QoS Commands 2-7

accounting default AAA RADIUS HWTACACS Commands

1-2

accounting lan-access AAA RADIUS HWTACACS Commands

1-3

accounting login AAA RADIUS HWTACACS Commands

1-4

accounting optional AAA RADIUS HWTACACS Commands

1-5

accounting portal AAA RADIUS HWTACACS Commands

1-6

accounting ppp AAA RADIUS HWTACACS Commands

1-7

acl ACL Commands 1-4

acl (in user interface view) User Interface Commands 1-1

acl ipv6 ACL Commands 1-18

acsei client close ACSEI Commands 1-1

acsei client reboot ACSEI Commands 1-1

acsei server ACSEI Commands 1-2

acsei server enable ACSEI Commands 1-2

acsei timer clock-sync ACSEI Commands 1-3

acsei timer monitor ACSEI Commands 1-4


2-2

active region-configuration MSTP Commands 1-1

add hop MPLS TE Commands 1-1

aggregate BGP Commands 1-1

aggregation-group Tunneling Commands 1-1

aggregation-group GRE Commands 1-1

apply as-path Routing Policy Commands 1-1

apply comm-list delete Routing Policy Commands 1-2

apply community Routing Policy Commands 1-2

apply cost Routing Policy Commands 1-4

apply cost-type Routing Policy Commands 1-4

apply extcommunity Routing Policy Commands 1-5

apply ip-address next-hop Routing Policy Commands 1-26

apply ipv6 next-hop Routing Policy Commands 1-33

apply isis Routing Policy Commands 1-6

apply local-preference Routing Policy Commands 1-7

apply mpls-label Routing Policy Commands 1-8

apply origin Routing Policy Commands 1-8

apply poe-profile PoE Commands 1-1

apply poe-profile interface PoE Commands 1-2

apply preference Routing Policy Commands 1-9

apply preferred-value Routing Policy Commands 1-10

apply tag Routing Policy Commands 1-11

area (OSPF view) OSPF Commands 1-2

area (OSPFv3 view) IPv6 OSPFv3 commands 1-2

area-authentication-mode IS-IS Commands 1-1

arp anti-attack active-ack enable ARP Commands 1-17

arp anti-attack valid-ack enable ARP Commands 1-18

arp check enable ARP Commands 1-1

arp max-learning-num ARP Commands 1-1

arp resolving-route enable ARP Commands 1-16

arp source-suppression enable ARP Commands 1-13

arp source-suppression limit ARP Commands 1-14

arp static ARP Commands 1-2

arp timer aging ARP Commands 1-4


2-3

asbr-summary OSPF Commands 1-3

ascii File System Management Commands

2-5

attribute AAA RADIUS HWTACACS Commands

1-8

authentication default AAA RADIUS HWTACACS Commands

1-9

authentication lan-access AAA RADIUS HWTACACS Commands

1-11

authentication login AAA RADIUS HWTACACS Commands

1-12

authentication portal AAA RADIUS HWTACACS Commands

1-13

authentication ppp AAA RADIUS HWTACACS Commands

1-14

authentication-mode OSPF Commands 1-4

authentication-mode User Interface Commands 1-3

authorization command AAA RADIUS HWTACACS Commands

1-15

authorization default AAA RADIUS HWTACACS Commands

1-16

authorization lan-access AAA RADIUS HWTACACS Commands

1-17

authorization login AAA RADIUS HWTACACS Commands

1-18

authorization portal AAA RADIUS HWTACACS Commands

1-20

authorization ppp AAA RADIUS HWTACACS Commands

1-20

auto cost enable IS-IS Commands 1-2

auto-execute command User Interface Commands 1-2

auto-rp enable PIM Commands 1-1

B backup interface MPLS Hybrid Insertion

Commands 1-1

backup startup-configuration File System Management Commands

1-17

balance (BGP/BGP-VPN instance view) BGP Commands 1-3

balance (IPv6 address family view) IPv6 BGP Commands 1-1


2-4

bandwidth VPLS Commands 1-1

bandwidth-reference IS-IS Commands 1-3

bandwidth-reference (OSPF view) OSPF Commands 1-5

bestroute as-path-neglect (BGP/BGP-VPN instance view)

BGP Commands 1-4

bestroute as-path-neglect (IPv6 address family view)

IPv6 BGP Commands 1-2

bestroute compare-med IPv6 BGP Commands 1-2

bestroute compare-med (BGP/BGP-VPN instance view)

BGP Commands 1-4

bestroute med-confederation (BGP/BGP-VPN instance view)

BGP Commands 1-5

bestroute med-confederation (IPv6 address family view)


bgp BGP Commands 1-6

bims-server DHCP Commands 1-1

binary File System Management Commands

2-5

bootfile-name DHCP Commands 1-2

boot-loader Device Management Commands

1-1

bootrom update Device Management Commands

1-2

bpdu-tunnel dot1q enable BPDU Tunneling Commands

1-1

bpdu-tunnel dot1q stp BPDU Tunneling Commands

1-2

broadcast-restrain VPLS Commands 1-1

broadcast-suppression Ethernet Interface Commands

1-1

bsr-policy PIM Commands 1-1

bsr-policy IPv6 PIM Commands 1-1

bye SSH2.0 Commands 1-47

bye File System Management Commands

2-6

C cache-sa-enable MSDP Commands 1-1

car QoS Commands 2-8


2-5

car name QoS Commands 6-1

c-bsr PIM Commands 1-2

c-bsr IPv6 PIM Commands 1-2

c-bsr admin-scope PIM Commands 1-3

c-bsr global PIM Commands 1-4

c-bsr group PIM Commands 1-5

c-bsr hash-length PIM Commands 1-6

c-bsr hash-length IPv6 PIM Commands 1-3

c-bsr holdtime PIM Commands 1-6

c-bsr holdtime IPv6 PIM Commands 1-3

c-bsr interval PIM Commands 1-7

c-bsr interval IPv6 PIM Commands 1-4

c-bsr priority PIM Commands 1-8

c-bsr priority IPv6 PIM Commands 1-5

ccc interface in-label out-label MPLS L2VPN Commands 1-1

ccc interface out-interface MPLS L2VPN Commands 1-2

cd SSH2.0 Commands 1-48

cd File System Management Commands

1-1

cd File System Management Commands

2-6

cdup SSH2.0 Commands 1-49

cdup File System Management Commands

2-7

ce MPLS L2VPN Commands 1-3

check region-configuration MSTP Commands 1-1

checkzero RIP Commands 1-1

checkzero IPv6 RIPng Commands 1-1

circuit-cost IS-IS Commands 1-4

classifier behavior QoS Commands 2-21

clock POS Interface Commands 1-1

clock Clock Monitoring Commands

1-1

clock datetime Basic System Configuration Commands

1-1


2-6

clock forcessm Clock Monitoring Commands

1-2

clock lpuport Clock Monitoring Commands

1-3

clock priority Clock Monitoring Commands

1-4

clock sa-bit Clock Monitoring Commands

1-4

clock ssm Clock Monitoring Commands

1-5

clock ssmcontrol Clock Monitoring Commands

1-6

clock stop warm-up Clock Monitoring Commands

1-7

clock summer-time one-off Basic System Configuration Commands

1-1

clock summer-time repeating Basic System Configuration Commands

1-3

clock timezone Basic System Configuration Commands

1-4

close File System Management Commands

2-7

command-privilege Basic System Configuration Commands

1-5

compare-different-as-med IPv6 BGP Commands 1-4

compare-different-as-med (BGP/BGP-VPN instance view)

BGP Commands 1-7

confederation id BGP Commands 1-8

confederation nonstandard BGP Commands 1-9

confederation peer-as BGP Commands 1-10

connection MPLS L2VPN Commands 1-4

connection-limit default action L3+NAT Commands 1-1

connection-limit default amount L3+NAT Commands 1-1

connection-limit default rate L3+NAT Commands 1-2

connection-limit enable L3+NAT Commands 1-3

connection-limit policy L3+NAT Commands 1-4

copy File System Management Commands

1-1

cost-style IS-IS Commands 1-5


2-7

count NQA Commands 1-1

crc POS Interface Commands 1-2

c-rp PIM Commands 1-9

c-rp IPv6 PIM Commands 1-6

c-rp advertisement-interval PIM Commands 1-10

c-rp advertisement-interval IPv6 PIM Commands 1-7

c-rp holdtime PIM Commands 1-11

c-rp holdtime IPv6 PIM Commands 1-8

crp-policy PIM Commands 1-12

crp-policy IPv6 PIM Commands 1-9

cut connection AAA RADIUS HWTACACS Commands

1-22

D dampening (BGP/BGP-VPN instance view) BGP Commands 1-11

dampening (IPv6 address family view) IPv6 BGP Commands 1-5

databits User Interface Commands 1-4

datafill NQA Commands 1-2

data-flow-format (HWTACACS scheme view) AAA RADIUS HWTACACS Commands

1-72

data-flow-format (RADIUS scheme view) AAA RADIUS HWTACACS Commands

1-41

datasize NQA Commands 1-3

debugging System Maintaining and Debugging Commands

1-7

debugging acsei server ACSEI Commands 1-4

debugging acsei-client ACSEI Commands 1-6

debugging adjacent-table all Adjacency Table Commands

1-1

debugging adjacent-table entry Adjacency Table Commands

1-1

debugging adjacent-table event Adjacency Table Commands

1-3

debugging arp ARP Commands 1-4

debugging bgp BGP Commands 1-12

debugging bgp update ipv6 IPv6 BGP Commands 1-6

debugging connection-limit L3+NAT Commands 1-6


2-8

debugging device Device Management Commands

1-2

debugging dhcp relay DHCP Commands 2-1

debugging dhcp server DHCP Commands 1-2

debugging dns DNS Commands 1-1

debugging dot1x 802.1x Commands 1-1

debugging ethernet packet Ethernet Interface Commands

1-2

debugging fib errmsg IP Performance Commands

1-1

debugging fib rtmsg IP Performance Commands

1-2

debugging fib synmsg IP Performance Commands

1-1

debugging garp event GVRP Commands 1-1

debugging gre GRE Commands 1-2

debugging gvrp GVRP Commands 1-6

debugging ha HA Commands 1-1

debugging hwtacacs AAA RADIUS HWTACACS Commands

1-73

debugging igmp IGMP Commands 1-1

debugging igmp-snooping IGMP Snooping Commands

1-1

debugging ip error IP Performance Commands

1-3

debugging ip icmp IP Performance Commands

1-3

debugging ip packet IP Performance Commands

1-4

debugging ipv4-tunnel Tunneling Commands 1-2

debugging ipv6 adjacent-table all Adjacency Table Commands

1-6

debugging ipv6 adjacent-table entry Adjacency Table Commands

1-7

debugging ipv6 adjacent-table event Adjacency Table Commands

1-8

debugging ipv6 icmpv6 IPv6 Basics Commands 1-1

debugging ipv6 nd IPv6 Basics Commands 1-2

debugging ipv6 packet IPv6 Basics Commands 1-3


2-9

debugging ipv6 pathmtu IPv6 Basics Commands 1-5

debugging ipv6-tunnel Tunneling Commands 1-4

debugging isis IS-IS Commands 1-6

debugging isis traffic-eng MPLS TE Commands 1-2

debugging lacp packet Link Aggregation Commands

1-1

debugging lacp state Link Aggregation Commands

1-4

debugging link-aggregation error Link Aggregation Commands

1-6

debugging link-aggregation event Link Aggregation Commands

1-7

debugging mac-authentication event MAC Authentication Commands

1-1

debugging mfib Multicast Routing and Forwarding Commands

1-1

debugging mfib ipv6 IPv6 Multicast Routing and Forwarding Commands

1-1

debugging mld MLD Commands 1-1

debugging mld-snooping MLD Snooping Commands

1-1

debugging modem User Interface Commands 1-5

debugging mpls l2vpn MPLS L2VPN Commands 1-5

debugging mpls l3vpn MPLS L3VPN Commands 1-1

debugging mpls ldp MPLS Basics Commands 1-1

debugging mpls lfib MPLS Basics Commands 1-8

debugging mpls lfib slot drv MPLS Basics Commands 1-9

debugging mpls lspc MPLS Basics Commands 1-11

debugging mpls management MPLS Basics Commands 1-12

debugging mpls packet MPLS Basics Commands 1-24

debugging mpls rsvp-te MPLS TE Commands 1-3

debugging mpls te cspf MPLS TE Commands 1-4

debugging mpls te management MPLS TE Commands 1-5

debugging mrm Multicast Routing and Forwarding Commands

1-4

debugging mrm ipv6 IPv6 Multicast Routing and Forwarding Commands

1-4

debugging msdp MSDP Commands 1-1


2-10

debugging nat L3+NAT Commands 1-5

debugging nqa NQA Commands 1-3

debugging ntp-service NTP Commands 1-1

debugging oam Ethernet OAM Commands 1-1

debugging ospf event OSPF Commands 1-5

debugging ospf lsa OSPF Commands 1-8

debugging ospf mpls-te OSPF Commands 1-11

debugging ospf mpls-te MPLS TE Commands 1-6

debugging ospf packet OSPF Commands 1-16

debugging ospf spf OSPF Commands 1-19

debugging ospf timer OSPF Commands 1-25

debugging ospfv3 event IPv6 OSPFv3 commands 1-2

debugging ospfv3 ifsm IPv6 OSPFv3 commands 1-3

debugging ospfv3 lsa IPv6 OSPFv3 commands 1-5

debugging ospfv3 nfsm IPv6 OSPFv3 commands 1-8

debugging ospfv3 packet IPv6 OSPFv3 commands 1-10

debugging ospfv3 route IPv6 OSPFv3 commands 1-12

debugging pim PIM Commands 1-13

debugging pim ipv6 IPv6 PIM Commands 1-9

debugging portal Portal Commands 1-1

debugging ppp POS Interface Commands 1-2

debugging radius packet AAA RADIUS HWTACACS Commands

1-42

debugging rip RIP Commands 1-2

debugging ripng IPv6 RIPng Commands 1-1

debugging rmon RMON Commands 1-1

debugging rpr RPR Commands 1-1

debugging rpr interface RPR Commands 1-1

debugging rpr packet RPR Commands 1-2

debugging rpr sub-module RPR Commands 1-3

debugging snmp-agent SNMP Commands 1-1

debugging ssh client SSH2.0 Commands 1-1

debugging ssh server SSH2.0 Commands 1-5

debugging stp MSTP Commands 1-3


2-11

debugging stp event MSTP Commands 1-6

debugging stp instance MSTP Commands 1-8

debugging stp packet MSTP Commands 1-10

debugging tcp event IP Performance Commands

1-6

debugging tcp ipv6 IPv6 Basics Commands 1-6

debugging tcp md5 IP Performance Commands

1-8

debugging tcp packet IP Performance Commands

1-9

debugging tunnel Tunneling Commands 1-7

debugging udp ipv6 packet IPv6 Basics Commands 1-8

debugging udp packet IP Performance Commands

1-10

debugging udp-helper UDP Helper Commands 1-1

debugging vrffib MPLS L3VPN Commands 1-1

debugging vrrp ipv6 packet VRRP Commands 1-17

debugging vrrp ipv6 state VRRP Commands 1-19

debugging vrrp packet VRRP Commands 1-1

debugging vrrp state VRRP Commands 1-3

debugging vty User Interface Commands 1-6

default OSPF Commands 1-26

default cost IPv6 OSPFv3 commands 1-13

default cost (RIP view) RIP Commands 1-6

default cost (RIPng view) IPv6 RIPng Commands 1-3

default ipv4-unicast BGP Commands 1-14

default local-preference IPv6 BGP Commands 1-7

default local-preference (BGP/BGP-VPN instance view)

BGP Commands 1-15

default local-preference (BGP-VPNv4 subaddress family view)

MPLS L3VPN Commands 1-2

default med IPv6 BGP Commands 1-8

default med (BGP/BGP-VPN instance view) BGP Commands 1-15

default med (BGP-VPNv4 subaddress family view)


default-cost (OSPF area view) OSPF Commands 1-27

default-cost (OSPFv3 area view) IPv6 OSPFv3 commands 1-14


2-12

default-route imported IPv6 BGP Commands 1-8

default-route imported (BGP/BGP-VPN instance view)

BGP Commands 1-16

default-route originate RIP Commands 1-7

default-route-advertise (IS-IS view) IS-IS Commands 1-9

default-route-advertise (OSPF view) OSPF Commands 1-27

delete SSH2.0 Commands 1-49

delete File System Management Commands

1-2

delete File System Management Commands

2-8

delete hop MPLS TE Commands 1-6

delete ipv6 static-routes all IPv6 Static Routing Commands

1-1

delete static-routes all Static Routing Commands 1-1

description Ethernet Interface Commands

1-3

description VLAN Commands 1-1

description VPLS Commands 1-2

description NQA Commands 1-4

description (for IPv4) ACL Commands 1-5

description (for IPv6) ACL Commands 1-19

description (OSPF/OSPF area view) OSPF Commands 1-29

description (VPN instance view) MPLS L3VPN Commands 1-4

destination Tunneling Commands 1-9

destination GRE Commands 1-4

destination-ip NQA Commands 1-5

destination-port NQA Commands 1-6

dhcp enable DHCP Commands 1-6

dhcp relay address-check DHCP Commands 2-5

dhcp relay information enable DHCP Commands 2-5

dhcp relay information format DHCP Commands 2-6

dhcp relay information strategy DHCP Commands 2-7

dhcp relay release ip DHCP Commands 2-8

dhcp relay security static DHCP Commands 2-9

dhcp relay security tracker DHCP Commands 2-10


2-13

dhcp relay server-detect DHCP Commands 2-10

dhcp relay server-group DHCP Commands 2-11

dhcp relay server-select DHCP Commands 2-12

dhcp select relay DHCP Commands 2-13

dhcp select server global-pool DHCP Commands 1-7

dhcp server detect DHCP Commands 1-8

dhcp server forbidden-ip DHCP Commands 1-9

dhcp server ip-pool DHCP Commands 1-10

dhcp server ping packets DHCP Commands 1-10

dhcp server ping timeout DHCP Commands 1-11

dhcp server relay information enable DHCP Commands 1-12

dir SSH2.0 Commands 1-50

dir File System Management Commands

1-3

dir File System Management Commands

2-9

disconnect File System Management Commands

2-10

display acl ACL Commands 1-6

display acl ipv6 ACL Commands 1-20

display acsei client info ACSEI Commands 1-10

display acsei client summary ACSEI Commands 1-12

display adjacent-table Adjacency Table Commands

1-4

display arp ARP Commands 1-6

display arp ip-address ARP Commands 1-7

display arp source-suppression ARP Commands 1-15

display arp timer aging ARP Commands 1-8

display arp vpn-instance ARP Commands 1-9

display bgp group BGP Commands 1-17

display bgp ipv6 group IPv6 BGP Commands 1-9

display bgp ipv6 network IPv6 BGP Commands 1-11

display bgp ipv6 paths IPv6 BGP Commands 1-12

display bgp ipv6 peer IPv6 BGP Commands 1-13

display bgp ipv6 routing-table IPv6 BGP Commands 1-14


2-14

display bgp ipv6 routing-table as-path-acl IPv6 BGP Commands 1-17

display bgp ipv6 routing-table community IPv6 BGP Commands 1-17

display bgp ipv6 routing-table community-list IPv6 BGP Commands 1-18

display bgp ipv6 routing-table dampened IPv6 BGP Commands 1-19

display bgp ipv6 routing-table dampening parameter


display bgp ipv6 routing-table different-origin-as


display bgp ipv6 routing-table flap-info IPv6 BGP Commands 1-22

display bgp ipv6 routing-table peer IPv6 BGP Commands 1-23

display bgp ipv6 routing-table regular-expression


display bgp ipv6 routing-table statistic IPv6 BGP Commands 1-25

display bgp l2vpn MPLS L2VPN Commands 1-6

display bgp network BGP Commands 1-19

display bgp paths BGP Commands 1-20

display bgp peer BGP Commands 1-21

display bgp routing-table BGP Commands 1-23

display bgp routing-table as-path-acl BGP Commands 1-25

display bgp routing-table cidr BGP Commands 1-26

display bgp routing-table community BGP Commands 1-27

display bgp routing-table community-list BGP Commands 1-28

display bgp routing-table dampened BGP Commands 1-28

display bgp routing-table dampening parameter

BGP Commands 1-29

display bgp routing-table different-origin-as BGP Commands 1-30

display bgp routing-table flap-info BGP Commands 1-31

display bgp routing-table peer BGP Commands 1-32

display bgp routing-table regular-expression BGP Commands 1-33

display bgp routing-table statistic BGP Commands 1-34

display bgp vpls VPLS Commands 1-3

display bgp vpnv4 all routing-table MPLS L3VPN Commands 1-4

display bgp vpnv4 group MPLS L3VPN Commands 1-7

display bgp vpnv4 network MPLS L3VPN Commands 1-9

display bgp vpnv4 paths MPLS L3VPN Commands 1-10


2-15

display bgp vpnv4 peer MPLS L3VPN Commands 1-11

display bgp vpnv4 route-distinguisher routing-table


display bgp vpnv4 routing-table label MPLS L3VPN Commands 1-19

display bgp vpnv4 vpn-instance routing-table MPLS L3VPN Commands 1-21

display boot-loader Device Management Commands

1-3

display brief interface Ethernet Interface Commands

1-3

display ccc MPLS L2VPN Commands 1-12

display channel Information Center Commands

1-1

display clipboard Basic System Configuration Commands

1-6

display clock Basic System Configuration Commands

1-7

display clock basephase Clock Monitoring Commands

1-8

display clock config Clock Monitoring Commands

1-8

display clock d/a Clock Monitoring Commands

1-10

display clock device Clock Monitoring Commands

1-10

display clock lpuport Clock Monitoring Commands

1-13

display clock phase-lock-state Clock Monitoring Commands

1-14

display clock priority Clock Monitoring Commands

1-15

display clock self-test-result Clock Monitoring Commands

1-16

display clock source Clock Monitoring Commands

1-17

display clock ssm-level Clock Monitoring Commands

1-18

display clock ssm-output Clock Monitoring Commands

1-19

display clock version Clock Monitoring Commands

1-20

display clock work-mode Clock Monitoring Commands

1-21


2-16

display connection AAA RADIUS HWTACACS Commands

1-23

display connection-limit policy L3+NAT Commands 1-6

display counters Ethernet Interface Commands

1-6

display counters rate Ethernet Interface Commands

1-8

display cpu-usage Device Management Commands

1-4

display current-configuration Basic System Configuration Commands

1-8

display debugging System Maintaining and Debugging Commands

1-8

display debugging ospfv3 IPv6 OSPFv3 commands 1-15

display device Device Management Commands

1-6

display device manuinfo Device Management Commands

1-8

display dhcp relay DHCP Commands 2-14

display dhcp relay security DHCP Commands 2-14

display dhcp relay security statistics DHCP Commands 2-15

display dhcp relay security tracker DHCP Commands 2-16

display dhcp relay server-group DHCP Commands 2-17

display dhcp relay statistics DHCP Commands 2-18

display dhcp server conflict DHCP Commands 1-12

display dhcp server expired DHCP Commands 1-13

display dhcp server forbidden-ip DHCP Commands 1-14

display dhcp server free-ip DHCP Commands 1-15

display dhcp server ip-in-use DHCP Commands 1-15

display dhcp server statistics DHCP Commands 1-17

display dhcp server tree DHCP Commands 1-18

display diagnostic-information Basic System Configuration Commands

1-10

display dns domain DNS Commands 1-2

display dns dynamic-host DNS Commands 1-3

display dns ipv6 dynamic-host IPv6 Basics Commands 1-10

display dns server DNS Commands 1-4


2-17

display domain AAA RADIUS HWTACACS Commands

1-24

display dot1x 802.1x Commands 1-1

display environment Device Management Commands

1-8

display explicit-path MPLS TE Commands 1-7

display fan Device Management Commands

1-9

display fib IP Performance Commands

1-12

display fib ip-address IP Performance Commands

1-14

display fib statistics IP Performance Commands

1-15

display fib statistics vpn-instance MPLS L3VPN Commands 1-24

display fib vpn-instance MPLS L3VPN Commands 1-25

display flow-template interface ACL Commands 2-2

display flow-template user-defined ACL Commands 2-1

display ftp client configuration File System Management Commands

2-10

display ftp-server File System Management Commands

2-1

display ftp-user File System Management Commands

2-1

display fullmesh-enhance HA Commands 1-1

display garp statistics GVRP Commands 1-2

display garp timer GVRP Commands 1-2

display gvrp statistics GVRP Commands 1-8

display gvrp status GVRP Commands 1-9

display history-command Basic System Configuration Commands

1-11

display hotkey Basic System Configuration Commands

1-12

display hwtacacs AAA RADIUS HWTACACS Commands

1-73

display icmp statistics IP Performance Commands

1-15

display igmp group IGMP Commands 1-4

display igmp group port-info IGMP Commands 1-5


2-18

display igmp interface IGMP Commands 1-7

display igmp routing-table IGMP Commands 1-9

display igmp-snooping group IGMP Snooping Commands

1-3

display igmp-snooping statistics IGMP Snooping Commands

1-5

display info-center Information Center Commands

1-2

display interface Ethernet Interface Commands

1-10

display interface RPR Commands 1-4

display interface pos POS Interface Commands 1-3

display interface tunnel Tunneling Commands 1-11

display interface tunnel GRE Commands 1-5

display interface vlan-interface VLAN Commands 1-2

display ip as-path Routing Policy Commands 1-12

display ip community-list Routing Policy Commands 1-13

display ip extcommunity-list Routing Policy Commands 1-13

display ip host DNS Commands 1-5

display ip interface IP Addressing Commands 1-1

display ip interface brief IP Addressing Commands 1-3

display ip interface pos POS Interface Commands 1-6

display ip ip-prefix Routing Policy Commands 1-27

display ip ipv6-prefix Routing Policy Commands 1-33

display ip netstream cache NetStream Commands 1-1

display ip netstream export NetStream Commands 1-2

display ip routing-table IP Routing Table Display Commands

1-1

display ip routing-table acl IP Routing Table Display Commands

1-5

display ip routing-table ip-address IP Routing Table Display Commands

1-9

display ip routing-table ip-prefix IP Routing Table Display Commands

1-12

display ip routing-table protocol IP Routing Table Display Commands

1-13

display ip routing-table statistics IP Routing Table Display Commands

1-15


2-19

display ip socket IP Performance Commands

1-17

display ip statistics IP Performance Commands

1-20

display ip vpn-instance MPLS L3VPN Commands 1-26

display ipv6 adjacent-table Adjacency Table Commands

1-9

display ipv6 fib IPv6 Basics Commands 1-11

display ipv6 fibcache IPv6 Basics Commands 1-12

display ipv6 host IPv6 Basics Commands 1-13

display ipv6 interface IPv6 Basics Commands 1-14

display ipv6 interface pos POS Interface Commands 1-7

display ipv6 interface tunnel Tunneling Commands 1-12

display ipv6 interface tunnel GRE Commands 1-7

display ipv6 neighbors IPv6 Basics Commands 1-16

display ipv6 neighbors count IPv6 Basics Commands 1-17

display ipv6 pathmtu IPv6 Basics Commands 1-18

display ipv6 routing-table IP Routing Table Display Commands

1-16

display ipv6 routing-table acl IP Routing Table Display Commands

1-17

display ipv6 routing-table ipv6-address IP Routing Table Display Commands

1-18

display ipv6 routing-table ipv6-address1 ipv6-address2

IP Routing Table Display Commands

1-19

display ipv6 routing-table ipv6-prefix IP Routing Table Display Commands

1-20

display ipv6 routing-table protocol IP Routing Table Display Commands

1-21

display ipv6 routing-table statistics IP Routing Table Display Commands

1-22

display ipv6 routing-table verbose IP Routing Table Display Commands

1-23

display ipv6 socket IPv6 Basics Commands 1-19

display isis brief IS-IS Commands 1-10

display isis debug-switches IS-IS Commands 1-12

display isis graceful-restart status GR Commands 1-1

display isis interface IS-IS Commands 1-12


2-20

display isis license IS-IS Commands 1-14

display isis lsdb IS-IS Commands 1-16

display isis mesh-group IS-IS Commands 1-18

display isis name-table IS-IS Commands 1-19

display isis peer IS-IS Commands 1-20

display isis route IS-IS Commands 1-21

display isis route ipv6 IPv6 IS-IS Commands 1-1

display isis spf-log IS-IS Commands 1-23

display isis statistics IS-IS Commands 1-24

display isis traffic-eng advertisements MPLS TE Commands 1-8

display isis traffic-eng link MPLS TE Commands 1-11

display isis traffic-eng network MPLS TE Commands 1-13

display isis traffic-eng statistics MPLS TE Commands 1-15

display isolate-user-vlan VLAN Commands 3-1

display l2vpn ccc-interface vc-type MPLS L2VPN Commands 1-13

display lacp system-id Link Aggregation Commands

1-9

display link-aggregation interface Link Aggregation Commands

1-10

display link-aggregation service-type Link Aggregation Commands

1-12

display link-aggregation summary Link Aggregation Commands

1-13

display link-aggregation verbose Link Aggregation Commands

1-15

display local-proxy-arp ARP Commands 2-1

display local-server statistics AAA RADIUS HWTACACS Commands

1-43

display local-user AAA RADIUS HWTACACS Commands

1-26

display logbuffer Information Center Commands

1-5

display logbuffer summary Information Center Commands

1-7

display logfile buffer Information Center Commands

1-8

display logfile summary Information Center Commands

1-9


2-21

display lpu fiber-module System Maintaining and Debugging Commands

1-9

display mac-address MAC Address Table Management Commands

1-1

display mac-address aging-time MAC Address Table Management Commands

1-2

display mac-address mac-learning MAC Address Table Management Commands

1-3

display mac-address vsi VPLS Commands 1-8

display mac-authentication MAC Authentication Commands

1-1

display memory Device Management Commands

1-10

display memory Basic System Configuration Commands

1-13

display mirroring-group Port Mirroring Commands 1-1

display mld group MLD Commands 1-5

display mld group port-info MLD Commands 1-7

display mld interface MLD Commands 1-9

display mld routing-table MLD Commands 1-11

display mld-snooping group MLD Snooping Commands

1-3

display mld-snooping statistics MLD Snooping Commands

1-5

display mpls interface MPLS Basics Commands 1-26

display mpls l2vc MPLS L2VPN Commands 1-15

display mpls l2vpn MPLS L2VPN Commands 1-17

display mpls l2vpn connection MPLS L2VPN Commands 1-20

display mpls l2vpn forwarding-info MPLS L2VPN Commands 1-24

display mpls label MPLS Basics Commands 1-28

display mpls ldp MPLS Basics Commands 1-29

display mpls ldp cr-lsp MPLS Basics Commands 1-30

display mpls ldp interface MPLS Basics Commands 1-31

display mpls ldp Isp MPLS Basics Commands 1-33

display mpls ldp peer MPLS Basics Commands 1-34

display mpls ldp remote-peer MPLS Basics Commands 1-36

display mpls ldp session MPLS Basics Commands 1-37


2-22

display mpls ldp vpn-instance MPLS Basics Commands 1-39

display mpls lsp MPLS Basics Commands 1-40

display mpls lsp statistics MPLS Basics Commands 1-43

display mpls route-state MPLS Basics Commands 1-44

display mpls rsvp-te MPLS TE Commands 1-16

display mpls rsvp-te established MPLS TE Commands 1-18

display mpls rsvp-te peer MPLS TE Commands 1-19

display mpls rsvp-te psb-content MPLS TE Commands 1-21

display mpls rsvp-te request MPLS TE Commands 1-23

display mpls rsvp-te reservation MPLS TE Commands 1-24

display mpls rsvp-te rsb-content MPLS TE Commands 1-26

display mpls rsvp-te sender MPLS TE Commands 1-28

display mpls rsvp-te statistics MPLS TE Commands 1-30

display mpls static-cr-lsp MPLS TE Commands 1-33

display mpls static-l2vc MPLS L2VPN Commands 1-25

display mpls static-lsp MPLS Basics Commands 1-44

display mpls statistics interface MPLS Basics Commands 1-45

display mpls statistics lsp MPLS Basics Commands 1-47

display mpls te cspf tedb MPLS TE Commands 1-35

display mpls te link-administration admission-control

MPLS TE Commands 1-41

display mpls te link-administration bandwidth-allocation

MPLS TE Commands 1-42

display mpls te tunnel MPLS TE Commands 1-44

display mpls te tunnel path MPLS TE Commands 1-46

display mpls te tunnel statistics MPLS TE Commands 1-47

display mpls te tunnel-interface MPLS TE Commands 1-48

display msdp brief MSDP Commands 1-5

display msdp peer-status MSDP Commands 1-6

display msdp sa-cache MSDP Commands 1-9

display msdp sa-count MSDP Commands 1-11

display multicast boundary Multicast Routing and Forwarding Commands

1-5

display multicast forwarding-table Multicast Routing and Forwarding Commands

1-6


2-23

display multicast ipv6 boundary IPv6 Multicast Routing and Forwarding Commands

1-6

display multicast ipv6 forwarding-table IPv6 Multicast Routing and Forwarding Commands

1-7

display multicast ipv6 routing-table IPv6 Multicast Routing and Forwarding Commands

1-10

display multicast ipv6 rpf-info IPv6 Multicast Routing and Forwarding Commands

1-11

display multicast routing-table Multicast Routing and Forwarding Commands

1-9

display multicast routing-table static Multicast Routing and Forwarding Commands

1-11

display multicast rpf-info Multicast Routing and Forwarding Commands

1-12

display multicast-vlan Multicast VLAN Commands

1-1

display nat address-group L3+NAT Commands 1-7

display nat all L3+NAT Commands 1-8

display nat connection-limit L3+NAT Commands 1-10

display nat limit L3+NAT Commands 1-11

display nat log L3+NAT Commands 1-14

display nat outbound L3+NAT Commands 1-15

display nat server L3+NAT Commands 1-15

display nat session L3+NAT Commands 1-16

display nat statistics L3+NAT Commands 1-18

display nqa NQA Commands 1-7

display ntp-service sessions NTP Commands 1-8

display ntp-service status NTP Commands 1-10

display ntp-service trace NTP Commands 1-11

display oam Ethernet OAM Commands 1-2

display oam configuration Ethernet OAM Commands 1-7

display oam critical-event Ethernet OAM Commands 1-8

display oam link-event Ethernet OAM Commands 1-10

display ospf abr-asbr OSPF Commands 1-29

display ospf asbr-summary OSPF Commands 1-30

display ospf brief OSPF Commands 1-32

display ospf cumulative OSPF Commands 1-35


2-24

display ospf error OSPF Commands 1-37

display ospf interface OSPF Commands 1-39

display ospf lsdb OSPF Commands 1-40

display ospf mpls-te MPLS TE Commands 1-51

display ospf nexthop OSPF Commands 1-43

display ospf peer OSPF Commands 1-44

display ospf peer statistics OSPF Commands 1-47

display ospf request-queue OSPF Commands 1-48

display ospf retrans-queue OSPF Commands 1-49

display ospf routing OSPF Commands 1-51

display ospf sham-link MPLS L3VPN Commands 1-27

display ospf traffic-adjustment MPLS TE Commands 1-55

display ospf vlink OSPF Commands 1-52

display ospfv3 IPv6 OSPFv3 commands 1-16

display ospfv3 interface IPv6 OSPFv3 commands 1-17

display ospfv3 lsdb IPv6 OSPFv3 commands 1-19

display ospfv3 lsdb statistic IPv6 OSPFv3 commands 1-22

display ospfv3 next-hop IPv6 OSPFv3 commands 1-23

display ospfv3 peer IPv6 OSPFv3 commands 1-24

display ospfv3 peer statistic IPv6 OSPFv3 commands 1-25

display ospfv3 request-list IPv6 OSPFv3 commands 1-27

display ospfv3 retrans-list IPv6 OSPFv3 commands 1-28

display ospfv3 routing IPv6 OSPFv3 commands 1-30

display ospfv3 statistic IPv6 OSPFv3 commands 1-31

display ospfv3 topology IPv6 OSPFv3 commands 1-33

display ospfv3 vlink IPv6 OSPFv3 commands 1-34

display password-control Password Control Commands

1-1

display password-control blacklist Password Control Commands

1-2

display pim bsr-info PIM Commands 1-21

display pim claimed-route PIM Commands 1-23

display pim control-message counters PIM Commands 1-24

display pim grafts PIM Commands 1-26

display pim interface PIM Commands 1-27


2-25

display pim ipv6 bsr-info IPv6 PIM Commands 1-18

display pim ipv6 claimed-route IPv6 PIM Commands 1-19

display pim ipv6 control-message counters IPv6 PIM Commands 1-21

display pim ipv6 grafts IPv6 PIM Commands 1-23

display pim ipv6 interface IPv6 PIM Commands 1-24

display pim ipv6 join-prune IPv6 PIM Commands 1-26

display pim ipv6 neighbor IPv6 PIM Commands 1-27

display pim ipv6 routing-table IPv6 PIM Commands 1-28

display pim ipv6 rp-info IPv6 PIM Commands 1-31

display pim join-prune PIM Commands 1-28

display pim neighbor PIM Commands 1-29

display pim routing-table PIM Commands 1-30

display pim rp-info PIM Commands 1-34

display poe device PoE Commands 1-3

display poe interface PoE Commands 1-4

display poe interface power PoE Commands 1-7

display poe power-usage PoE Commands 1-9

display poe pse PoE Commands 1-10

display poe pse interface PoE Commands 1-12

display poe pse interface power PoE Commands 1-15

display poe-power PoE Commands 1-17

display poe-power ac-input state PoE Commands 1-18

display poe-power alarm PoE Commands 1-20

display poe-power dc-output state PoE Commands 1-21

display poe-power dc-output value PoE Commands 1-22

display poe-power status PoE Commands 1-23

display poe-power supervision-module PoE Commands 1-24

display poe-power switch state PoE Commands 1-26

display poe-profile PoE Commands 1-26

display poe-profile interface PoE Commands 1-29

display port Ethernet Interface Commands

1-13

display portal acl Portal Commands 1-4

display portal connection statistics Portal Commands 1-6


2-26

display portal free-rule Portal Commands 1-9

display portal interface Portal Commands 1-10

display portal server Portal Commands 1-12

display portal server statistics Portal Commands 1-13

display portal tcp-cheat statistics Portal Commands 1-15

display portal user Portal Commands 1-16

display port-group manual Ethernet Interface Commands

1-14

display port-isolate group Port Isolation Commands 1-1

display power Device Management Commands

1-11

display protocol-vlan interface VLAN Commands 1-16

display protocol-vlan vlan VLAN Commands 1-17

display proxy-arp ARP Commands 2-1

display qos car name QoS Commands 6-1

display qos gts interface QoS Commands 1-1

display qos map-table QoS Commands 4-1

display qos map-table color QoS Commands 4-2

display qos policy interface QoS Commands 2-22

display qos policy user-defined QoS Commands 2-23

display qos policy user-defined QoS Commands 8-1

display qos sp interface QoS Commands 3-1

display qos traffic-counter outbound QoS Commands 10-1

display qos trust interface QoS Commands 4-8

display qos vlan-policy QoS Commands 7-1

display qos wred interface QoS Commands 5-1

display qos wred table QoS Commands 5-2

display qos wrr interface QoS Commands 3-2

display radius AAA RADIUS HWTACACS Commands

1-43

display radius statistics AAA RADIUS HWTACACS Commands

1-45

display rip RIP Commands 1-8

display rip database RIP Commands 1-10

display rip interface RIP Commands 1-11


2-27

display rip route RIP Commands 1-12

display ripng IPv6 RIPng Commands 1-4

display ripng database IPv6 RIPng Commands 1-5

display ripng interface IPv6 RIPng Commands 1-6

display ripng route IPv6 RIPng Commands 1-8

display rmon alarm RMON Commands 1-4

display rmon event RMON Commands 1-5

display rmon eventlog RMON Commands 1-6

display rmon history RMON Commands 1-7

display rmon prialarm RMON Commands 1-9

display rmon statistics RMON Commands 1-11

display route-policy Routing Policy Commands 1-14

display rpr defect RPR Commands 1-6

display rpr fairness RPR Commands 1-7

display rpr protection RPR Commands 1-9

display rpr rs-table RPR Commands 1-11

display rpr statistics RPR Commands 1-13

display rpr timers RPR Commands 1-14

display rpr topology RPR Commands 1-16

display rpr tunnel vlan RPR Commands 1-24

display rpr vrrp-info RPR Commands 1-25

display rsa local-key-pair public SSH2.0 Commands 1-13

display rsa peer-public-key SSH2.0 Commands 1-15

display saved-configuration File System Management Commands

1-18

display schedule reboot Device Management Commands

1-11

display sftp client source SSH2.0 Commands 1-16

display snmp-agent community SNMP Commands 1-5

display snmp-agent group SNMP Commands 1-6

display snmp-agent local-engineid SNMP Commands 1-8

display snmp-agent mib-view SNMP Commands 1-8

display snmp-agent statistics SNMP Commands 1-10

display snmp-agent sys-info SNMP Commands 1-12

display snmp-agent trap-list SNMP Commands 1-13


2-28

display snmp-agent usm-user SNMP Commands 1-14

display ssh client source SSH2.0 Commands 1-17

display ssh server SSH2.0 Commands 1-18

display ssh server-info SSH2.0 Commands 1-19

display ssh user-information SSH2.0 Commands 1-20

display startup File System Management Commands

1-19

display stop-accounting-buffer AAA RADIUS HWTACACS Commands

1-48

display stop-accounting-buffer AAA RADIUS HWTACACS Commands

1-75

display stp MSTP Commands 1-12

display stp ignored-vlan MSTP Commands 1-14

display stp region-configuration MSTP Commands 1-15

display supervlan VLAN Commands 2-1

display switchover state HA Commands 1-2

display tcp ipv6 statistics IPv6 Basics Commands 1-21

display tcp ipv6 status IPv6 Basics Commands 1-24

display tcp statistics IP Performance Commands

1-21

display tcp status IP Performance Commands

1-24

display telnet client configuration User Interface Commands 1-6

display tftp client configuration File System Management Commands

3-1

display this Basic System Configuration Commands

1-14

display time-range ACL Commands 1-1

display traffic behavior user-defined QoS Commands 2-9

display traffic behavior user-defined QoS Commands 8-2

display traffic classifier user-defined QoS Commands 2-1

display transceiver alarm interface Ethernet Interface Commands

1-15

display transceiver diagnosis interface Ethernet Interface Commands

1-18

display transceiver interface Ethernet Interface Commands

1-19


2-29

display transceiver manuinfo interface Ethernet Interface Commands

1-21

display trapbuffer Information Center Commands

1-10

display tunnel-info MPLS TE Commands 1-56

display tunnel-policy MPLS L3VPN Commands 1-29

display udp ipv6 statistics IPv6 Basics Commands 1-25

display udp statistics IP Performance Commands

1-25

display udp-helper server UDP Helper Commands 1-3

display user-interface User Interface Commands 1-7

display userlog export L3+NAT Commands 1-19

display users User Interface Commands 1-9

display version Basic System Configuration Commands

1-15

display vlan VLAN Commands 1-3

display vpls connection VPLS Commands 1-9

display vpls fib VPLS Commands 1-11

display vrrp VRRP Commands 1-4

display vrrp ipv6 VRRP Commands 1-20

display vrrp ipv6 statistics VRRP Commands 1-22

display vrrp statistics VRRP Commands 1-6

display vsi VPLS Commands 1-12

display vsi remote VPLS Commands 1-15

display xbar Device Management Commands

1-12

dns domain DNS Commands 1-6

dns resolve DNS Commands 1-7

dns server DNS Commands 1-7

dns server ipv6 IPv6 Basics Commands 1-26

dns-list DHCP Commands 1-20

domain AAA RADIUS HWTACACS Commands

1-28

domain default AAA RADIUS HWTACACS Commands

1-29

domain-authentication-mode IS-IS Commands 1-26

domain-id MPLS L3VPN Commands 1-30


2-30

domain-name DHCP Commands 1-21

dot1x 802.1x Commands 1-5

dot1x authentication-method 802.1x Commands 1-6

dot1x guest-vlan 802.1x Commands 1-7

dot1x handshake 802.1x Commands 1-9

dot1x max-user 802.1x Commands 1-10

dot1x port-control 802.1x Commands 1-11

dot1x port-method 802.1x Commands 1-12

dot1x quiet-period 802.1x Commands 1-14

dot1x retry 802.1x Commands 1-14

dot1x supp-proxy-check 802.1x Commands 1-15

dot1x timer 802.1x Commands 1-17

drop-unknown IGMP Snooping Commands

1-6

drop-unknown MLD Snooping Commands

1-6

duplex Ethernet Interface Commands

1-22

du-readvertise MPLS Basics Commands 1-49

du-readvertise timer MPLS Basics Commands 1-50

E ebgp-interface-sensitive BGP Commands 1-35

embedded-rp IPv6 PIM Commands 1-32

enable NetStream Commands 1-4

enable link-local-signaling GR Commands 1-2

enable log OSPF Commands 1-53

enable out-of-band-resynchronization GR Commands 1-3

enable snmp trap updown SNMP Commands 1-15

enable traffic-adjustment MPLS TE Commands 1-57

enable traffic-adjustment advertise MPLS TE Commands 1-58

encap-data-enable MSDP Commands 1-12

encapsulation VPLS Commands 1-16

execute File System Management Commands

1-4

exit SSH2.0 Commands 1-51


2-31

expediting enable Tunneling Commands 1-14

expediting enable GRE Commands 1-9

expediting subnet Tunneling Commands 1-14

expired DHCP Commands 1-22

explicit-path MPLS TE Commands 1-59

export route-policy MPLS L3VPN Commands 1-30

F fast-leave IGMP Snooping

Commands 1-7

fast-leave IGMP Commands 1-10

fast-leave MLD Snooping Commands

1-7

fdisk File System Management Commands

1-5

file prompt File System Management Commands

1-7

filename NQA Commands 1-11

filter OSPF Commands 1-54

filter QoS Commands 2-10

filter-policy export IPv6 RIPng Commands 1-9

filter-policy export (BGP/BGP-VPN instance view)

BGP Commands 1-36

filter-policy export (BGP-VPNv4 subaddress family view)


filter-policy export (IS-IS view) IS-IS Commands 1-27

filter-policy export (OSPF view) OSPF Commands 1-55

filter-policy export (OSPFv3 view) IPv6 OSPFv3 commands 1-35

filter-policy export (RIP view) RIP Commands 1-15

filter-policy export(IPv6 address family view) IPv6 BGP Commands 1-26

filter-policy import (BGP/BGP-VPN instance view)

BGP Commands 1-37

filter-policy import (BGP-VPNv4 subaddress family view)


filter-policy import (IPv6 address family view) IPv6 BGP Commands 1-27

filter-policy import (IS-IS view) IS-IS Commands 1-29

filter-policy import (OSPF view) OSPF Commands 1-56


2-32

filter-policy import (OSPFv3 view) IPv6 OSPFv3 commands 1-36

filter-policy import (RIP view) RIP Commands 1-16

filter-policy import (RIPng view) IPv6 RIPng Commands 1-10

fixdisk File System Management Commands

1-8

flag POS Interface Commands 1-8

flag sdh Ethernet Interface Commands

1-23

flash-flood IS-IS Commands 1-29

flow-control Ethernet Interface Commands

1-24

flow-control User Interface Commands 1-10

flow-interval Ethernet Interface Commands

1-24

flow-template ACL Commands 2-3

flow-template basic ACL Commands 2-4

flow-template extend ACL Commands 2-6

format File System Management Commands

1-8

frame-format POS Interface Commands 1-10

free user-interface User Interface Commands 1-11

frequency NQA Commands 1-12

ftp File System Management Commands

2-11

ftp client source File System Management Commands

2-12

ftp ipv6 File System Management Commands

2-13

ftp server enable File System Management Commands

2-2

ftp timeout File System Management Commands

2-3

ftp update File System Management Commands

2-4

ftp-operation NQA Commands 1-13

fullmesh-enhance HA Commands 1-3


2-33

G garp timer GVRP Commands 1-3

garp timer leaveall GVRP Commands 1-5

gateway-list DHCP Commands 1-22

get SSH2.0 Commands 1-51

get File System Management Commands

2-15

graceful-restart (BGP view) GR Commands 1-4

graceful-restart (IS-IS view) GR Commands 1-5

graceful-restart (MPLS LDP view) GR Commands 1-6

graceful-restart (OSPF view) GR Commands 1-6

graceful-restart help GR Commands 1-7

graceful-restart interval (IS-IS view) GR Commands 1-8

graceful-restart mpls ldp GR Commands 1-9

graceful-restart suppress-sa GR Commands 1-10

graceful-restart timer neighbor-liveness GR Commands 1-11

graceful-restart timer reconnect GR Commands 1-11

graceful-restart timer recovery GR Commands 1-12

graceful-restart timer restart GR Commands 1-13

graceful-restart timer wait-for-rib GR Commands 1-14

gratuitous-arp-learning enable ARP Commands 1-12

gratuitous-arp-sending enable ARP Commands 1-12

group (BGP/BGP-VPN instance view) BGP Commands 1-38

group (IPv6 address family view) IPv6 BGP Commands 1-28

group-member Ethernet Interface Commands

1-25

group-policy IGMP Snooping Commands

1-8

group-policy MLD Snooping Commands

1-8

gvrp GVRP Commands 1-10

gvrp registration GVRP Commands 1-11

H ha slave-ignore-version-check HA Commands 1-4


2-34

header Basic System Configuration Commands

1-16

hello-option dr-priority PIM Commands 1-35

hello-option dr-priority IPv6 PIM Commands 1-33

hello-option holdtime PIM Commands 1-36

hello-option holdtime IPv6 PIM Commands 1-34

hello-option lan-delay PIM Commands 1-37

hello-option lan-delay IPv6 PIM Commands 1-35

hello-option neighbor-tracking PIM Commands 1-38

hello-option neighbor-tracking IPv6 PIM Commands 1-35

hello-option override-interval PIM Commands 1-38

hello-option override-interval IPv6 PIM Commands 1-36

help SSH2.0 Commands 1-52

history-command max-size User Interface Commands 1-12

history-records NQA Commands 1-14

holdtime join-prune PIM Commands 1-39

holdtime join-prune IPv6 PIM Commands 1-37

hops-count MPLS Basics Commands 1-51

host-advertise OSPF Commands 1-57

host-aging-time IGMP Snooping Commands

1-9

host-aging-time MLD Snooping Commands

1-9

host-route RIP Commands 1-17

hotkey Basic System Configuration Commands

1-17

http-operation NQA Commands 1-14

http-string NQA Commands 1-15

hwtacacs nas-ip AAA RADIUS HWTACACS Commands

1-76

hwtacacs scheme AAA RADIUS HWTACACS Commands

1-77

I idle-cut AAA RADIUS

HWTACACS Commands 1-30

idle-timeout User Interface Commands 1-13


2-35

if-match QoS Commands 2-2

if-match acl Routing Policy Commands 1-28

if-match as-path Routing Policy Commands 1-15

if-match community Routing Policy Commands 1-16

if-match cost Routing Policy Commands 1-17

if-match extcommunity Routing Policy Commands 1-18

if-match interface Routing Policy Commands 1-18

if-match ip Routing Policy Commands 1-29

if-match ip-prefix Routing Policy Commands 1-30

if-match ipv6 Routing Policy Commands 1-34

if-match mpls-label Routing Policy Commands 1-19

if-match route-type Routing Policy Commands 1-20

if-match tag Routing Policy Commands 1-21

igmp IGMP Commands 1-12

igmp enable IGMP Commands 1-12

igmp fast-leave IGMP Commands 1-13

igmp group-policy IGMP Commands 1-14

igmp last-member-query-interval IGMP Commands 1-15

igmp max-response-time IGMP Commands 1-16

igmp require-router-alert IGMP Commands 1-17

igmp robust-count IGMP Commands 1-18

igmp send-router-alert IGMP Commands 1-19

igmp static-group IGMP Commands 1-19

igmp timer other-querier-present IGMP Commands 1-21

igmp timer query IGMP Commands 1-21

igmp version IGMP Commands 1-22

igmp-snooping IGMP Snooping Commands

1-9

igmp-snooping enable IGMP Snooping Commands

1-10

igmp-snooping fast-leave IGMP Snooping Commands

1-11

igmp-snooping general-query source-ip IGMP Snooping Commands

1-12

igmp-snooping group-limit IGMP Snooping Commands

1-13


2-36

igmp-snooping group-policy IGMP Snooping Commands

1-15

igmp-snooping host-aging-time IGMP Snooping Commands

1-16

igmp-snooping host-join IGMP Snooping Commands

1-17

igmp-snooping last-member-query-interval IGMP Snooping Commands

1-18

igmp-snooping max-response-time IGMP Snooping Commands

1-19

igmp-snooping overflow-replace IGMP Snooping Commands

1-20

igmp-snooping querier IGMP Snooping Commands

1-21

igmp-snooping query-interval IGMP Snooping Commands

1-22

igmp-snooping router-aging-time IGMP Snooping Commands

1-23

igmp-snooping special-query source-ip IGMP Snooping Commands

1-23

igmp-snooping static-group IGMP Snooping Commands

1-24

igmp-snooping static-router-port IGMP Snooping Commands

1-26

igmp-snooping version IGMP Snooping Commands

1-27

import QoS Commands 4-4

import route-policy MPLS L3VPN Commands 1-33

import-route IPv6 RIPng Commands 1-11

import-route (BGP/BGP-VPN instance view) BGP Commands 1-39

import-route (IPv6 address family view) IPv6 BGP Commands 1-28

import-route (IS-IS view) IS-IS Commands 1-30

import-route (OSPF view) OSPF Commands 1-57

import-route (OSPFv3 view) IPv6 OSPFv3 commands 1-37

import-route (RIP view) RIP Commands 1-18

import-route isis level-2 into level-1 IS-IS Commands 1-32

import-source MSDP Commands 1-13

info-center channel name Information Center Commands

1-11


2-37

info-center console channel Information Center Commands

1-12

info-center enable Information Center Commands

1-13

info-center logbuffer Information Center Commands

1-14

info-center logfile enable Information Center Commands

1-15

info-center logfile frequency Information Center Commands

1-15

info-center logfile size-quota Information Center Commands

1-16

info-center logfile switch-directory Information Center Commands

1-17

info-center loghost Information Center Commands

1-18

info-center loghost source Information Center Commands

1-19

info-center monitor channel Information Center Commands

1-20

info-center snmp channel Information Center Commands

1-20

info-center source Information Center Commands

1-21

info-center synchronous Information Center Commands

1-23

info-center timestamp Information Center Commands

1-24

info-center timestamp loghost Information Center Commands

1-25

info-center trapbuffer Information Center Commands

1-25

instance MSTP Commands 1-16

interface Ethernet Interface Commands

1-26

interface eacl QoS Commands 9-1

interface net-stream NetStream Commands 1-4

interface pos POS Interface Commands 1-10

interface tunnel Tunneling Commands 1-16

interface tunnel GRE Commands 1-10

interface vlan-interface VLAN Commands 1-4


2-38

ip address VLAN Commands 1-5

ip address IP Addressing Commands 1-4

ip address ppp-negotiate POS Interface Commands 1-11

ip address unnumbered IP Addressing Commands 1-5

ip as-path Routing Policy Commands 1-22

ip binding vpn-instance MPLS L3VPN Commands 1-34

ip community-list Routing Policy Commands 1-23

ip extcommunity-list Routing Policy Commands 1-24

ip forward-broadcast (interface view) IP Performance Commands

1-26

ip forward-broadcast (system view) IP Performance Commands

1-27

ip host DNS Commands 1-8

ip ip-prefix Routing Policy Commands 1-31

ip ipv6-prefix Routing Policy Commands 1-35

ip netstream NetStream Commands 1-5

ip netstream aggregation NetStream Commands 1-6

ip netstream binding interface NetStream Commands 1-7

ip netstream export host NetStream Commands 1-8

ip netstream export source interface NetStream Commands 1-9

ip netstream export v9-template refresh-rate packet

NetStream Commands 1-10

ip netstream export v9-template refresh-rate time

NetStream Commands 1-11

ip netstream export version NetStream Commands 1-12

ip netstream timeout active NetStream Commands 1-13

ip netstream timeout inactive NetStream Commands 1-14

ip pool AAA RADIUS HWTACACS Commands

1-30

ip redirects enable IP Performance Commands

1-28

ip route-static Static Routing Commands 1-1

ip route-static default-preference Static Routing Commands 1-4

ip rpf-route-static Multicast Routing and Forwarding Commands

1-13

ip ttl-expires enable IP Performance Commands

1-28


2-39

ip unreachables enable IP Performance Commands

1-29

ip vpn-instance MPLS L3VPN Commands 1-35

ipv4-family MPLS L3VPN Commands 1-35

ipv6 IPv6 Basics Commands 1-27

ipv6 Dual Stack Commands 1-1

ipv6 address IPv6 Basics Commands 1-28

ipv6 address Dual Stack Commands 1-1

ipv6 address auto link-local IPv6 Basics Commands 1-28

ipv6 address auto link-local Dual Stack Commands 1-2

ipv6 address eui-64 IPv6 Basics Commands 1-29

ipv6 address eui-64 Dual Stack Commands 1-3

ipv6 address link-local IPv6 Basics Commands 1-30

ipv6 address link-local Dual Stack Commands 1-4

ipv6 default-route-advertise IPv6 IS-IS Commands 1-4

ipv6 enable IPv6 IS-IS Commands 1-5

ipv6 fibcache IPv6 Basics Commands 1-31

ipv6 fib-loadbalance-type hash-based IPv6 Basics Commands 1-31

ipv6 filter-policy export IPv6 IS-IS Commands 1-5

ipv6 filter-policy import IPv6 IS-IS Commands 1-7

ipv6 host IPv6 Basics Commands 1-32

ipv6 icmp-error IPv6 Basics Commands 1-33

ipv6 import-route IPv6 IS-IS Commands 1-8

ipv6 import-route isisv6 level-2 into level-1 IPv6 IS-IS Commands 1-9

ipv6 maximum load-balancing IPv6 IS-IS Commands 1-10

ipv6 mtu IPv6 Basics Commands 1-33

ipv6 mtu (tunnel Interface view) GRE Commands 1-10

ipv6 nd autoconfig managed-address-flag IPv6 Basics Commands 1-34

ipv6 nd autoconfig other-flag IPv6 Basics Commands 1-35

ipv6 nd dad attempts IPv6 Basics Commands 1-36

ipv6 nd hop-limit IPv6 Basics Commands 1-36

ipv6 nd ns retrans-timer IPv6 Basics Commands 1-37

ipv6 nd nud reachable-time IPv6 Basics Commands 1-38

ipv6 nd ra halt IPv6 Basics Commands 1-39


2-40

ipv6 nd ra interval IPv6 Basics Commands 1-39

ipv6 nd ra prefix IPv6 Basics Commands 1-40

ipv6 nd ra router-lifetime IPv6 Basics Commands 1-41

ipv6 neighbor IPv6 Basics Commands 1-42

ipv6 neighbors max-learning-num IPv6 Basics Commands 1-43

ipv6 pathmtu IPv6 Basics Commands 1-44

ipv6 pathmtu age IPv6 Basics Commands 1-45

ipv6 preference IPv6 IS-IS Commands 1-11

ipv6 route-static IPv6 Static Routing Commands

1-1

ipv6 summary IPv6 IS-IS Commands 1-12

ipv6-family IPv6 BGP Commands 1-29

isis IS-IS Commands 1-33

isis authentication-mode IS-IS Commands 1-34

isis circuit-level IS-IS Commands 1-35

isis circuit-type IS-IS Commands 1-36

isis cost IS-IS Commands 1-37

isis dis-name IS-IS Commands 1-38

isis dis-priority IS-IS Commands 1-39

isis enable IS-IS Commands 1-40

isis enable IS-IS Commands 1-43

isis ipv6 enable IPv6 IS-IS Commands 1-13

isis mesh-group IS-IS Commands 1-41

isis peer-ip-ignore IS-IS Commands 1-42

isis small-hello IS-IS Commands 1-44

isis timer csnp IS-IS Commands 1-44

isis timer hello IS-IS Commands 1-45

isis timer holding-multiplier IS-IS Commands 1-46

isis timer lsp IS-IS Commands 1-48

isis timer retransmit IS-IS Commands 1-48

is-level IS-IS Commands 1-49

is-name IS-IS Commands 1-50

is-name map IS-IS Commands 1-51

isolate-user-vlan VLAN Commands 3-2


2-41

isolate-user-vlan enable VLAN Commands 3-4

is-snmp-traps enable IS-IS Commands 1-52

J jitter-interval NQA Commands 1-16

jitter-packetnum NQA Commands 1-17

jp-pkt-size PIM Commands 1-40

jp-pkt-size IPv6 PIM Commands 1-38

jp-queue-size PIM Commands 1-40

jp-queue-size IPv6 PIM Commands 1-38

jumboframe enable Ethernet Interface Commands

1-27

K key (HWTACACS scheme view) AAA RADIUS

HWTACACS Commands 1-77

key (RADIUS scheme view) AAA RADIUS HWTACACS Commands

1-49

L l2 binding vsi VPLS Commands 1-17

l2vpn-family MPLS L2VPN Commands 1-26

l2vpn-vpls service binding service-id MPLS Hybrid Insertion Commands

1-2

l2vpn-vpls service binding vsi MPLS Hybrid Insertion Commands

1-3

label advertise MPLS Basics Commands 1-51

label-distribution MPLS Basics Commands 1-53

label-retention MPLS Basics Commands 1-54

lacp port-priority Link Aggregation Commands

1-17

lacp system-priority Link Aggregation Commands

1-18

last-listener-query-interval MLD Snooping Commands

1-10

last-listener-query-interval MLD Commands 1-12

last-member-query-interval IGMP Snooping Commands

1-27


2-42

last-member-query-interval IGMP Commands 1-23

lcd File System Management Commands

2-15

level AAA RADIUS HWTACACS Commands

1-31

limit mode L3+NAT Commands 1-21

limit rate L3+NAT Commands 1-22

limit source L3+NAT Commands 1-22

link-aggregation group description Link Aggregation Commands

1-18

link-aggregation group mode Link Aggregation Commands

1-19

link-aggregation group service-type Link Aggregation Commands

1-20

link-delay Ethernet Interface Commands

1-28

link-protocol POS Interface Commands 1-12

list hop MPLS TE Commands 1-59

local-proxy-arp enable ARP Commands 2-2

local-server AAA RADIUS HWTACACS Commands

1-50

local-user AAA RADIUS HWTACACS Commands

1-32

local-user password-display-mode AAA RADIUS HWTACACS Commands

1-33

lock User Interface Commands 1-14

logfile save Information Center Commands

1-26

log-peer-change BGP Commands 1-40

log-peer-change IS-IS Commands 1-52

log-peer-change OSPF Commands 1-59

log-peer-change IPv6 OSPFv3 commands 1-38

loopback Ethernet Interface Commands

1-29

loopback POS Interface Commands 1-13

loop-detect MPLS Basics Commands 1-55

ls SSH2.0 Commands 1-53

ls File System Management Commands

2-16


2-43

lsa-arrival-interval OSPF Commands 1-59

lsa-generation-interval OSPF Commands 1-60

lsdb-overflow-limit OSPF Commands 1-61

lsp-fragments-extend IS-IS Commands 1-53

lsp-length originate IS-IS Commands 1-54

lsp-length receive IS-IS Commands 1-55

lsp-trigger MPLS Basics Commands 1-55

lsr-id MPLS Basics Commands 1-56

M mac-address (Ethernet interface view) MAC Address Table

Management Commands 1-4

mac-address (system view) MAC Address Table Management Commands

1-5

mac-address mac-learning disable MAC Address Table Management Commands

1-6

mac-address max-mac-count (Ethernet interface view/port group view)

MAC Address Table Management Commands

1-7

mac-address max-mac-count (VLAN view) MAC Address Table Management Commands

1-8

mac-address timer MAC Address Table Management Commands

1-9

mac-authentication MAC Authentication Commands

1-4

mac-authentication domain MAC Authentication Commands

1-5

mac-authentication timer MAC Authentication Commands

1-6

mac-authentication user-name-format MAC Authentication Commands

1-7

mac-table limit VPLS Commands 1-18

maximum load-balancing IPv6 RIPng Commands 1-12

maximum load-balancing (IS-IS view) IS-IS Commands 1-56

maximum load-balancing (OSPF view) OSPF Commands 1-62

maximum load-balancing (RIP view) RIP Commands 1-19

maximum load-balancing(OSPFv3 view) IPv6 OSPFv3 commands 1-39

maximum-routes OSPF Commands 1-63


2-44

max-response-time IGMP Snooping Commands

1-28

max-response-time IGMP Commands 1-24

max-response-time MLD Snooping Commands

1-10

max-response-time MLD Commands 1-12

md5-password MPLS Basics Commands 1-57

mdi Ethernet Interface Commands

1-30

mirroring-group Port Mirroring Commands 1-2

mirroring-group mirroring-port Port Mirroring Commands 1-3

mirroring-group monitor-port Port Mirroring Commands 1-5

mirroring-group reflector-port Port Mirroring Commands 1-5

mirroring-group remote-probe vlan Port Mirroring Commands 1-7

mirroring-port Port Mirroring Commands 1-8

mirror-to cpu QoS Commands 8-3

mirror-to interface QoS Commands 8-4

mkdir SSH2.0 Commands 1-54

mkdir File System Management Commands

1-9

mkdir File System Management Commands

2-17

mld MLD Commands 1-13

mld enable MLD Commands 1-14

mld last-listener-query-interval MLD Commands 1-15

mld max-response-time MLD Commands 1-16

mld require-router-alert MLD Commands 1-16

mld robust-count MLD Commands 1-17

mld send-router-alert MLD Commands 1-18

mld timer other-querier-present MLD Commands 1-19

mld timer query MLD Commands 1-20

mld version MLD Commands 1-21

mld-snooping MLD Snooping Commands

1-11

mld-snooping enable MLD Snooping Commands

1-12


2-45

mld-snooping fast-leave MLD Snooping Commands

1-13

mld-snooping general-query source-ip MLD Snooping Commands

1-14

mld-snooping group-limit MLD Snooping Commands

1-15

mld-snooping group-policy MLD Snooping Commands

1-16

mld-snooping host-aging-time MLD Snooping Commands

1-18

mld-snooping host-join MLD Snooping Commands

1-19

mld-snooping last-listener-query-interval MLD Snooping Commands

1-20

mld-snooping max-response-time MLD Snooping Commands

1-21

mld-snooping overflow-replace MLD Snooping Commands

1-22

mld-snooping querier MLD Snooping Commands

1-23

mld-snooping query-interval MLD Snooping Commands

1-24

mld-snooping router-aging-time MLD Snooping Commands

1-24

mld-snooping special-query source-ip MLD Snooping Commands

1-25

mld-snooping static-group MLD Snooping Commands

1-26

mld-snooping static-router-port MLD Snooping Commands

1-27

mld-snooping version MLD Snooping Commands

1-28

modem User Interface Commands 1-15

modem auto-answer User Interface Commands 1-16

modem timer answer User Interface Commands 1-16

modify hop MPLS TE Commands 1-60

monitor-port Port Mirroring Commands 1-9

more File System Management Commands

1-10

mount File System Management Commands

1-11


2-46

move File System Management Commands

1-12

mpls MPLS Basics Commands 1-58

mpls l2vc MPLS L2VPN Commands 1-27

mpls l2vpn MPLS L2VPN Commands 1-28

mpls l2vpn vpn-name MPLS L2VPN Commands 1-29

mpls ldp (interface view) MPLS Basics Commands 1-60

mpls ldp (system view) MPLS Basics Commands 1-59

mpls ldp advertisement MPLS Basics Commands 1-61

mpls ldp remote-peer MPLS Basics Commands 1-62

mpls ldp timer hello-hold MPLS Basics Commands 1-63

mpls ldp timer keepalive-hold MPLS Basics Commands 1-64

mpls ldp transport-address MPLS Basics Commands 1-65

mpls lsr-id MPLS Basics Commands 1-66

mpls rsvp-te MPLS TE Commands 1-61

mpls rsvp-te authentication MPLS TE Commands 1-62

mpls rsvp-te blockade-multiplier MPLS TE Commands 1-63

mpls rsvp-te hello MPLS TE Commands 1-64

mpls rsvp-te hello-lost MPLS TE Commands 1-65

mpls rsvp-te keep-multiplier MPLS TE Commands 1-66

mpls rsvp-te reliability MPLS TE Commands 1-67

mpls rsvp-te resvconfirm MPLS TE Commands 1-67

mpls rsvp-te srefresh MPLS TE Commands 1-68

mpls rsvp-te timer hello MPLS TE Commands 1-69

mpls rsvp-te timer refresh MPLS TE Commands 1-69

mpls rsvp-te timer retransmission MPLS TE Commands 1-70

mpls service binding MPLS Hybrid Insertion Commands

1-3

mpls static-l2vc destination MPLS L2VPN Commands 1-30

mpls te MPLS TE Commands 1-71

mpls te affinity property MPLS TE Commands 1-72

mpls te backup MPLS TE Commands 1-73

mpls te backup bandwidth MPLS TE Commands 1-74

mpls te bandwidth MPLS TE Commands 1-75

mpls te bandwidth change thresholds MPLS TE Commands 1-76


2-47

mpls te commit MPLS TE Commands 1-77

mpls te cspf MPLS TE Commands 1-77

mpls te cspf timer failed-link MPLS TE Commands 1-78

mpls te fast-reroute MPLS TE Commands 1-79

mpls te fast-reroute bypass-tunnel MPLS TE Commands 1-80

mpls te igp advertise MPLS TE Commands 1-81

mpls te igp metric MPLS TE Commands 1-82

mpls te igp shortcut MPLS TE Commands 1-82

mpls te link administrative group MPLS TE Commands 1-83

mpls te loop-detection MPLS TE Commands 1-84

mpls te max-link-bandwidth MPLS TE Commands 1-85

mpls te max-reservable-bandwidth MPLS TE Commands 1-86

mpls te metric MPLS TE Commands 1-86

mpls te path explicit-path MPLS TE Commands 1-87

mpls te path metric-type MPLS TE Commands 1-88

mpls te priority MPLS TE Commands 1-89

mpls te record-route MPLS TE Commands 1-89

mpls te reoptimization (tunnel interface view) MPLS TE Commands 1-91

mpls te reoptimization (user view) MPLS TE Commands 1-90

mpls te resv-style MPLS TE Commands 1-91

mpls te retry MPLS TE Commands 1-92

mpls te route-pinning MPLS TE Commands 1-93

mpls te signal-protocol MPLS TE Commands 1-94

mpls te tie-breaking MPLS TE Commands 1-95

mpls te timer fast-reroute MPLS TE Commands 1-96

mpls te timer retry MPLS TE Commands 1-97

mpls te vpn-binding MPLS TE Commands 1-97

mpls-te MPLS TE Commands 1-98

msdp MSDP Commands 1-14

mtu (for POS Interfaces) POS Interface Commands 1-14

mtu (MPLS L2VPN view) MPLS L2VPN Commands 1-31

mtu (tunnel interface view) Tunneling Commands 1-17

mtu (tunnel Interface view) GRE Commands 1-11

mtu (VSI view) VPLS Commands 1-19


2-48

mtu-signalling MPLS Basics Commands 1-67

multicast boundary Multicast Routing and Forwarding Commands

1-15

multicast forwarding-table downstream-limit Multicast Routing and Forwarding Commands

1-16

multicast forwarding-table route-limit Multicast Routing and Forwarding Commands

1-17

multicast ipv6 boundary IPv6 Multicast Routing and Forwarding Commands

1-12

multicast ipv6 forwarding-table downstream-limit

IPv6 Multicast Routing and Forwarding Commands

1-13

multicast ipv6 forwarding-table route-limit IPv6 Multicast Routing and Forwarding Commands

1-14

multicast ipv6 load-splitting IPv6 Multicast Routing and Forwarding Commands

1-15

multicast ipv6 routing-enable IPv6 Multicast Routing and Forwarding Commands

1-16

multicast load-splitting Multicast Routing and Forwarding Commands

1-18

multicast longest-match Multicast

Documents

H3C S9500 Series Routing Switches Command Manualh17007. · H3C S9500 Series Routing Switches Command Manual ... (OSPFv3 area view) ... H3C S9500 Series Routing Switches Chapter 2