Embed Size (px)
Citation preview
Handling and conveying systems – efficient and safe
● Elevators ● Trough chain conveyors ● Screw conveyors ● Conveyor belts
1
High-performing and present all over the world
Elevators State-of-the-art elevators for vertical handling of bulk goods at rates up to 800 tonnes per hour.
Trough chain conveyorsEnvironmentally compatible low-stress handling of delicate products. Handles up to 600 tonnes per hour.
Screw conveyorsFor a wide range of applications; low space requirements. Screw conveyors for handling up to 250 tonnes per hour.
❯ Trough screw conveyors❯ Tube screw conveyors
Conveyor beltsAll-purpose continuous conveyors with high hourly output rates (up to 1.300 t/h), low energy requirements, and excellent reliability.
❯ U-section belt conveyors❯ Stressed-skin belt conveyors
Pellet handling data
Residue-free handling and conveying systems / materials
Our experience for your success
4
6
14
20
24
31
32
34
Table of contents
2 33
4 55
High-performing and present all over the world
The applications of modern handling and convey-ing systems are virtually unlimited. Handling and conveying systems made by Schmidt-Seeger are therefore the systems of choice for many bran-ches of industry all over the world. Our brand name has become synonymous for the efficient and safe handling of bulk goods of all types.
Our elevators, conveyor belts, trough chain and screw conveyors and our numerous special mo-dels are designed specific to the product and are tailor-made to our customers’ requirements.
Malt houses Food industryBuilding materials industry Grain industry
Solutions made by Schmidt-Seeger are always cost-effective. After all, high throughput rates and custom design have to remain affordable. That is why we are constantly optimizing our in-house processes. And why we uncompromisingly believe in rational and efficient manufacturing technologies. To meet these requirements for the benefit of our customers.
Thousands of successfully completed projects speak volumes about the performance and effici-ency of our machines and plants. And they are convincing proof for satisfied customers and the quality of our products.
Biomass processing
6 77
ElevatorsVertical take-off in mechanical handling
ElevatorsProduct design
Modern elevator technology must meet today’s sophisticated quality criteria when it comes to economical, fast and reliable handling of large quantities of goods.
We pay attention to this requirement when deve-loping and designing our elevators:
❯ High Throughput capacity (up to 800 tonnes per hour) with nevertheless compact sizes
❯ Optimized reliability thanks to an integral rever- sing lock, electronic speed monitoring, and electronic belt guide control (run-out monitor)
❯ Flexible and cost-effective range of applica- tions thanks to a comprehensive accessories package
Performance range
❯ From 5 t/h to 800 t/h
Elevator head
❯ Split hood for easy installation and main- tenance
❯ Replaceable wear plate
❯ Inspection- and cleaning port at the discharge point ❯ Dust-protected bearings
❯ Drive with gear motor and flexible coupling
❯ Integral reversing lock for safe and reliable operation
❯ Optionally available with internal liner made of wear-resistant plastic
❯ Run-out monitor
Belt
❯ Rubber belt with polyester liner
❯ Optionally available with PVC belt
❯ Optionally available with food-safe belts
Elevator foot
❯ Spindle-operated belt tension adjuster
❯ Generously dimensioned cleaning ports
❯ Integrated residue discharge slide
❯ Stave disc for gentle product pick-up
❯ Dust-protected bearings
❯ RPM- and run-out monitor
RPM monitor Run-out monitor 3 Stave disk in elevator foot for gentle product pick-up
2 Elevator foot with inspection opening, clean-out slide and spindle tensioning device
1 Elevator head Easy assembly and main- tenance thanks to divided hood and exchangeable wearing plate as well as inspection opening
Components Safety
Reversing lockInspection window
1
23
8 99
ElevatorsAccessories
ElevatorsSpecial designs
Specific applications require comprehensive accessories. Backed by our many years of involvement in a wide variety of fields we have developed a large number of components for customer-specific solutions.
Please let us know your specific needs and we shall be glad to advise you at any time and without any obligation.
Intermediate hopper atelevator outlet
Adjusting segment 30-60°
Two-way-valve box 45° pneumatically operated
Elevator inlet with slide and slide positioning lock
Pipe transition piece„square-to-round“
Cover with flanged pipe socket for elevator inlet
Heavy duty wear resistant plastic coating, e.g. for elevator head and foot, pipes and pipe parts – abrasion resistance 15-20 times better than steel
Solid casing
Prime coating + stove enamel finishing
Heavy duty wear resistant plastic coating
Two-way-valve box 45° electrically operated
Z-track conveyors Developed mainly for use in the cement and building materials industry, the ceramics industry and the chemical industry sector, this model features a particular-ly sturdy construction. External bearings, a revolving Flexowell belt and strong cleats are further characteristics. Handling capacity ranges from 10 to 200 m3/h.
Elevator head with pressure relief opening
Elevator head pressure-surge protected design with electronic belt-guide control (run-out monitor)
Elevator foot pressure-surge protected design with electro-mechanical belt-guide control (run-out monitor)
Swing bucket elevators for perfectly gentle hand-ling of delicate products. Particularly suitable for use in the seed, animal feed and food industries.
Chain elevators are particularly suitable for use e. g. in the building materials industry. They are dust-proof and specially designed for handling coarse and hot products.
10 1111
ElevatorsTechnical data
400/140400/140400/140400/180500/180630/180400/180500/180630/180400/225500/225630/225400/225500/225630/225400/225500/225630/225400/280500/280630/280800/280400/280500/280630/280800/280500/315630/315800/315500/315630/315800/315630/400800/400630/400800/400630/450800/450630/700800/700630/800800/800630/900800/900630/900800/900630/1200
Technical data
Capacity (t/h)
Max. Conveying height (m)
Belt speed (m/sec)
RPM (1/min)
Buckets Belt Belt disk
Size Width (mm)
No. of buckets per m
Diameter (mm) Width (mm)Material
type EP
Type
51020303030404040505050606060808080100100100100120120120120150150150200200200200200250250300300400400500500500500600600800
400
400500630400500630400500630400500630400500630400500630800400500630800500630800500630800630800630800630800630800630800630800630800630
2525252535502535502535502535502535502535509025355079355075304557567146593950355727462746193313
2.55.09.57.07.07.09.59.59.55.55.55.57.07.07.09.09.09.06.56.56.56.57.57.57.57.57.57.57.59.09.09.05.55.56.56.57.07.0
18.018.013.013.011.011.014.014.021.0
500
500500630500500630500500630500500630500500630500500630800500500630800500630800500630800630800630800630800630800630800630800630800630
148
14811894148118941481189414811894148118941481189474
14811894741189474
13010381947494749474
1038194749474947494
3.1
3.1
3.1
3.1
3.13.13.1
3.43.43.4
3.1
3.1
3.4
3.1
3.13.13.13.13.1
10
13
18
23
28
33
37
2x28
2x33
2x37
3x33
110
140
200
250
300
370
400
650
750
850
1100
140
180
225
280
315
400
450
700
800
900
1200
Technical design may be subject to changes!The capacity values specified above are based on cereal grains with a bulk weight of c = 0.75 t/m3.
12 1313
ElevatorsDimensions
400/140400/180500/180630/180400/225500/225630/225400/280500/280630/280800/280500/315630/315800/315630/400800/400630/450800/450630/700630/800800/700630/900800/800800/900630/1200
D400/140D400/180D400/225D500/225D500/280
Dimensions of elevators (mm)
Dimensions of double elevators (mm)
Head + footsheet thickness
design
Head + footsheet thickness
design
Steel
Steel
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
J
J
K
K
L
L
M
M
NW 1)
NW 1)
NW1 1)
NW1 1)
O 1)
O 1)
1.4301
1.4301
Single components
Single components
Type
Type
3344344444644666666666666
33344
333
33
43
33
1100122313351475136614781621151616251754205516331782205520122182200021781854205420392054221622162028
11001223136614781625
788873984111993810481194102311231253151411141260151414271573142016081387143415421434157415741427
78887393810511123
179184180202198210277209283290363290317361347450347455363363505363529529363
179184198210283
180236236236274274274322322322321395395394480480590590794900794
100090010001280
427539615615721
170172182232195247304231331338385288336385388500388505418418500418500500418
170172195247331
696748848978810910
1040850950108012509701100125012141384119813681145123613301236140614061214
696748810910950
1206135814581588152016201750170018001930210018201950210022422412242625762379246825682396246825662374
12061358152016201800
970108311541242119612721360130913591424157614081489157618091943177619431756186319431863194319431850
9701083119612721359
927103011111199115312291317127413241389152913641446152917431846167018531682176818491768184918491791
9271030115312291324
782870951
103496810541154108411341199133011641240133014151682142016891453149715691497156915691463
78287096810541134
182208208208238238238274274274274279279279354354328328340378340378378378350
182208238238274
334388396366430450422500500470578635543650708948818
10581262136812621468136814681748
581691771791899
150200200200250250250300S300S300S300S300S300S300S334334416416416
416x714416
400x800416x714400x800400x1140
150200250250300S
150200200200
200/250200/250200/250
250250250250
250/300S250/300S250/300S
334334416416416x2)
416x2)
x2)
x2)
x2)
150200
200/250200/250
250
130200145145
230/180230/180180/230
280280280280
280/230280/230280/230
320320295295600x2)
600x2)
x2)
x2)
x2)
130200
230/180230/180
280
A C D E
B
ONW1
NW NW
J
K
H
F M
G
L
Technical design may be subject to changes!
1) Dimensions of other nominal widths according to an extra dimension sheet
2) Dimensions have to be defined in accordance with the site situation
14 1515
Trough chain conveyorsThe particularly rugged handling and conveying systems!
Trough chain conveyorsProduct design
Trough chain conveyors are always a good choice for handling particularly delicate products:
❯ Extremely gentle product handling thanks to an enclosed product layer.
❯ Bulk products are handled in a sealed trough for outstanding environment-friendliness and effective avoidance of dust and odour nuisances.
❯ Handling is possible in both the lower and the upper trough sections, or in both simultan- eously. Trough chain conveyors can also be used as circulating conveyors.
1 Drive station Generously dimensioned drive unit with reserve capacity for output peaks. Drive unit with flexible coupling and gear motor. Overflow safety device with choke flap and limit switch; sturdy motor support.
3 Chain and trough
❯high-quality plate link chain in quality C45 ❯hardened bolts and bushes in quality C15 ❯integrated clean-out plastic strippers for residue discarding ❯idlers with ball bearings
Troughs are available in 3 different versions:
Version 1: with wearing rail in quality C45
Version 2: with plastic bottom for low-noise and low-wear conveying Version 3: with Rhino Hyde and guide bar (not shown)
2 Tensioning station with spindle tensioning device for the chain (with speed monitor on request)
Version 1
Version 2
1
2
3
16 1717
Trough chain conveyorsAccessories
Trough chain conveyorsSpecial designs
A wide range of accessories and extras is available for all trough chain conveyors. The modular design allows a flexible and individual layout of the spouting systems and makes assembly easier than ever before, thus reducing assembly hours considerably!
In addition to our standard trough chain conveyors we also offer a wide range of special designs for all types of bulk goods used in many different sectors. Below please find a few examples:
Trough for intake trough chainconveyorswith sturdy roof and lateral inlets
Outlet slide with rack and pinion for manual operation
Lateral inlet with capacity regulating valve
Outlet slideelectrically operated
Trough chain conveyor drive with infinitely variable geared motor – particularly suited for intake conveyors
Outlet slide pneumatically operated
Outlet hopper with round pipe transition piece
Distribution/Discharge conveyor for automated flat storage warehouses
Movable loading trough chain conveyor
Trough chain conveyor inlet
Adjusting segment 30-60°
18 1919
Trough chain conveyorsDimensions
Trough chain conveyorsTechnical data
T 16T 20T 20 HT 25T 30T 30 VT 40T 40 VT 40 H1T 40 H2T 40 H3T 50 H1T 50 H2T 50 H3T 50 H4T 60 H1T 60 H2T 60 H3T 60 H4T 80 H1T 80 H2T 80 H3T 80 H4
T 16T 20T 20 HT 25T 30T 30 VT 40T 40 VT 40 H1T 40 H2T 40 H3T 50 H1T 50 H2T 50 H3T 50 H4T 60 H1T 60 H2T 60 H3T 60 H4T 80 H1T 80 H2T 80 H3T 80 H4
Dimensions (mm) Technical data
Conveying capacity (t/h) for v= Motor power
(KW)Length (Lfmax m)
Cross section (A m2)
Conveying chain Chain wheel
A B C D E F G J K L M N O ZChain traction
PitchType0.4 m(sec)
0.5 m(sec)
0.6 m(sec)
0.65 m(sec)
0.75 m(sec) Dt
Single componentsType Type
304048649696120120133133133200200200200220220220220300300300300
6080120120150150166166166230230230230280280280280370370370370
200200200280280280280330330330330440440440440
300300300300375375375375480480480480
420420420420600600600600
-5.5-5.5-15-15-15-22-15-22-15-22-30-15-22-30-45-15-22-30-45-37-55-75-110
66777777999101010101010101010101010
125125150150150150150150150150150150150150150150150150150150150150150
15000150001900019000190003000019000300001900030000420001900030000420007000019000300004200070000350006000077000
133000
7560816548703958334862253647611927364927415570
0.0410.0620.0780.0960.0960.1240.1240.1440.1440.1440.2150.2150.2150.2150.2580.2580.2580.2580.3680.3680.3680.368
35/535/550/650/650/650/850/650/850/650/860/850/850/860/870/1250/1050/1060/1070/1250/850/860/870/12
250250
345.75345.75345.75375.75345.75345.75438.75438.75438.75485.4485.4485.4485.4485.4485.4485.4485.4485.4485.4485.4485.4
160200200250310310400400400400400500500500500600600600600800800800800
226266266316376376466466480480480608608608608708708708708908908908908
330330446446446446446446552552552643643643643643643643643643643643643
4104305465716016016466467557557558938938938939439439439431043104310431043
3013413413914514515415415415415417127127127128128128128121012101210121012
190190210210210210210210240240240306306306306306306306306306306306306
155175180205235279280324300324351376376401513426426451563526526551663
452452577577577885577885885885885973973973973973973973973973973973973
340380392442502502592592630630630756756776776856856876876
1056105610761076
648648773773773773773773905905905120412041204120412041204120412041204120412041204
103103121121121121121121
412412412470470470470470470470470470470470470
589589714714714714714714714714714839839839839839839839839839839839839
Drive on the right
Drive on the left
J L
O M
G
C
FD
A AB B K
Technical design may be subject to changes!The capacity values specified above are based on cereal grains with a bulk weight of c = 0.75 t/m3.
Technical design may be subject to changes!The capacity values specified above are based on cereal grains with a bulk weight of c = 0.75 t/m3.
N
E
Motor powerOperating cross section (m2)Pitch (mm)(N)Number of teeth
Pitch diameter (mm)Conveying capacity (t/h)Conveying speed (m/sec)max. conveying length (m)Bulk weight (t/m3)
KWA
PitchChain traction
Z
DtQv
Lfmaxc
20 2121
Screw conveyorsWide variety of uses – unchanging quality
Screw conveyorsTrough screw conveyors
Screw conveyors offer an enormous range of application possibilities – virtually without com-promise.
In process engineering, technical processes such as e. g. mixing, heating, and moistening, cooling can be effectively combined with handling.
Range of application – materials❯ Galvanized sheet steel for outdoor use❯ Stainless steel for the food industry and wet processing❯ Powder-coated for indoor use
Retarding flap with contact switch to avoid breakdown
Indirect drive
1 Drive- and outer bearing with flange type bearing. Optionally avail- able with pedestal bearing and inserted stuffing box sealing.
2 Direct drive by means of flexible coupling and geared mo- tor or – on request – with infinitely variable geared motor.
Important features
❯ Dust-free and odourless handling due to the possibility of completely sealing off the trough
❯ Simple integration into an overall system since the product can be charged and discharged at any point
❯ Space-saving design
B
E
C
D
A
F TL TL GKxL
H
D
Technical design may be subject to changes!The capacity values specified above are based on cereal grains with a bulk weight of c = 0.75 t/m3 for horizontal handling.
150200250315400500630
Technical data Dimensions
Type
15254060100160250
150200250315400500630
235150120100857567
170220270335426525660
150200250315355400500
240280350400514625775
60.3 x 6.360.3 x 6.360.3 x 6.376.1 x 6.3
114.3 x 6.3133.0 x 6.3168.3 x 6.3
140155180220290345400
3333333
284334384419526643812
404040506070
100
7575758389118145
506506506656772898968
404040506070
100
300300400400500600750
150200250300400500630
404040456070
100
404040506070
100
2223333
Capacity (t/h)
A
RPM (1/min)
B
Ascending slope (mm) C
Drive pin
(mm) D
Screw blade (mm) E
Drive pin
(mm) F
Intermedia-te bearing
(mm) G H K L
End bearing (mm)
Single components (mm)Trough + cover (mm)
TL = available trough lengths: 1496 mm, 1746 mm, 1996 mm, 2246 mm, 2496 mm, 2746 mm, 2996 mm.
1
2
1
22 2323
Screw conveyorsTube screw conveyors
Screw conveyorsSpecial designs
Tube screw conveyors are a multi-purpose hand-ling system for the clean and dust-free conveying of a wide range of products. Particularly suited for inclined/vertical handling with standard or conical thread.
We offer a wide range of special designs for virtu-ally every purpose of use.
Depending on application, we use welded thick-wall spouts according to DIN 2448 or DIN 2458.
Technical design may be subject to changes!The capacity values specified above are based on cereal grains with a bulk weight of c = 0.75 t/m3 for horizontal handling.
150200250300400
Technical data DimensionsType
16256080120
246296346396510
20017014511580
174224274324436
150200250300400
150200250300400
60.3 x 6.360.3 x 6.460.3 x 6.576.1 x 6.3114.3 x 6.3
100125150200250
33333
300300400400400
4040405060
150250250300400
4040405060
4040405060
22223
Capacity (t/h)
A
RPM (1/min)
B
Ascending slope (mm) C
Internal pipe (mm) D
Screw blade (mm) E
Drive pin
(mm) F
Intermediate bearing (mm)
End bearing
Single components (mm)Trough + cover (mm)
On request we also use galvanized or stainless steel.
1 Dust tight bearings with stuffing box sealing or additional bearing louver with shaft sealing ring ensure operatio- nal safety and long service life.
2 Direct drive with flexible coupling and gear motor.
In response to the requirements of the cereal grain, compound feed, food, construction materials and cement industry and of recycling operations, our design engineers have developed a wide range of special designs
Our experienced engineers are committed to solving our customers’ individual problems now and in the future.
Tube screw conveyor particularly heavy-duty design, special bearing sealing for the cement and building materials industry
Dampening screw for moistening cereal grains
Tube screw conveyor for the transport of mealy products, with easy to maintainintermediate bearings
Loading screw conveyor for flourmovable, with pneumatically actuated pressing device for low-dust loading
Discharging screw conveyor for hard-flowing products, e. g. in plaster production
Dosing screw conveyorwith infinitely variable drive, special bearing sealing via compression gland
Dosing screw conveyor with bagging unit for bagging of small quantities in thebuilding materials industry
C50 A
A
A B
D
30 30E x F
NW30 30
50
1
2
RL
RL = available tube lengths: 496 mm, 996 mm, 1496 mm, 1996 mm, 2496 mm, 2996 mm.
24 2525
Conveyor beltsA powerful link in handling and conveying systems
Conveyor belts U-section belt conveyors
Belt conveyor systems are the continuous hand-ling means with the highest performance. Re-gardless whether delicate or corrosive products are handled. Belt conveyors are reliable and gent-le, but above all cost-effective, energy-wise and flexibly product carriers.
Important features
❯ High performance, depending on the belt width and the belt speed
❯ Conveyor belts can be effectively integrated in automation concepts
❯ The traction carriers, which are embedded in rubber or plastic, are effectively protected against damage and moisture
Solid U-profile design
❯ With clamp-fitted 3-piece support structure
❯ Maintenance-free carrying rollers running in ball bearings
❯ Actuation via laterally fitted geared motor ❯ Generously dimensioned conveyor belt ❯ Conveyor belt resistant against vegetable and animal oils and fats, or optionally against mine- ral oils and greases
Conveyor belt installation length 85 m, capacity 300 t/h
Tripper with electrical displacement
U-section belt conveyors have been specially developed for rough applications – such as e. g. for the building materials industry, where sturdiness and high load capacities matter. Drives, bearings, idlers and belts are therefore particularly sturdy.
The open design ensures simple and trouble-free maintenance.
26 2727
Conveyor belts U-section belt conveyors: Technical data / Dimensions
Conveyor beltsSpecial designs
Flat belt with geared motor for handling bags, with safety pull cord switch
P 650P 800P 1000P 1200P 1400
Dimensions (mm)
GB g HG
Single componentsType
9501150135016001800
330365450515585
8301005110512301330
* Length of possible belt tensioning S S = 1000 mm for A ≤ 60 m S = 2000 mm for 60 m ≤ A ≤ 120 m For A > 120 m, weight-loaded belt tensioning stations for S > 2000 mm will be used.
P 650P 800P 1000P 1200P 1400
Technical data
Conveying capacity (t/h)for v = TroughingBelt width
(mm)Max. length
(m)
Bearing stations Return rollers
Distance (mm)
Distance (mm)
Diameter (mm)1.6 m/s 2.1 m/s 2.6 m/s 3 m/s Diameter
(mm)
Type
120200320
150250400600900
2003005008001100
60010001300
12001200120012001200
30003000300030003000
650800100012001400
250250250250250
3-piece 45°3-piece 45°3-piece 45°3-piece 45° 3-piece 45°
63.589108108133
63,5 / 10889 / 13389 / 13389 / 13389 / 133
Technical design may be subject to changes!The capacity values specified above are based on cereal grains with a bulk weight of c = 0.75 t/m3. Higher capacities available on request!
Technical design may be subject to changes!
Troughed belt conveyor with undercarriage height adjustment, for handling bulk goods of all types
High-capacity thrower belt conveyor for the storage of granular goods. Made of stainless steel, also suitable for aggressive materials.
HG
gH
BGB
d
Outlet hopper
Distance return rollers
Centre distance A
Distance bearing stations Feed hopper
S
Tensioning station
28 2929
Conveyor belts Stressed-skin conveyor belts
Stressed-skin conveyor belts have a modular design. The fully preassembled segments and light-weight construction make this design a particularly cost-effective investment. Safe and reliable transportation thanks to the laterally sealed belt framework.
2 Drive station with maintenance free drum type motor
Preassembled segment in lightweight construction
1 Tensioning station with belt tensioning by means of spindle tensioning device
weight loaded tensioning station for long belts
Tripper with electrical displacement
1
2
30 3131
Conveyor belts Stressed-skin conveyor belts: Technical data / Dimensions
M 500MN 650M 650M 800
Technical data
Capacity (t/h) TroughingSpeed(m/sec)
Belt width (mm)
Carrying idlers Return rollers
Distance(mm)
Distance(mm)
Diameter (mm)
Diameter (mm)
60120120200
1,681,681,682,09
500500500500
ca. 1250ca. 1250ca. 1250ca. 1250
500650650800
2-piece 20°3-piece 20°2-piece 20°3-piece 20°
50505063
63636363
M 500MN 650M 650M 800
Dimensions (mm)
Belt width(mm)
a b c d d1 e f g h k
Single componentsType
Type
500650650800
620770770980
370370440510
500500800750
5705707501100
800800
1350
250250250300
685685755990
275275275350
150150150150
175175175175
Technical design may be subject to changes!The capacity values specified above are based on cereal grains with a bulk weight of c = 0.75 t/m3 for horizontal handling.
Technical design may be subject to changes!
Pellet handling dataElevators, trough chain conveyors, conveyor belts
MN 650M 800
Performance data Technical data
Belt width (mm)
Speed (m/s)
Troughing
1.681.68
18°25°
40bis 120
650800
Technical design may be subject to changes!All capacity values specified above are based on pellets with a bulk weight of 0.6 m/t3.
20H4040-25050-2
Performance data Technical dataConveying chainMax. motor power
(KW) Max. length
9.29.2159.215
8050703550
408080120120
50/650/650/850/850/8
150150150150150
Type Pitch (mm)
T 280T 400T 450
Performance data Technical dataConveying capacity
(t/h)
Conveying capacity
(t/h)
Conveying capacity
(t/h)
BucketsBelt speed (m/s)
Height (m)Size Quantity
Type
Type
Type
2.12.12.1
424242
4080120
Starco 23Starco 37Starco 28
9 Units/m9 Units/m9 Units/m
Elevators
Trough chain conveyors
Conveyor belts
Read more about
Elevators on pages 6-13Trough chain conveyors on pages 14-19Conveyor belts on pages 24-31
aa
k 1235
bh
d/d1
A
A
Available intermediate lengths: 5 m; 3 m; 2.5 m; 2 m
c g
e (NW)
f
b
32 3333
Residue-free handling and conveying systems Special elevator and trough chain conveyor designs
Materials
Our special elevator and trough chain conveyor designs allow virtually residue-free handling. Mini-mized gaps and a geometrically optimized layout of the conveyor components leave virtually no spaces or dead angles where residue might accu-mulate. This innovation allows compliance with the hygiene directives, especially for the chemical, animal feed and food industries.
The advantages of residue-free handling and conveying systems❯ Hygienic conveying❯ No residues❯ No contamination
Material varieties
Powder coatingPowder coating is a standard procedure at Schmidt-Seeger. This type of surface refinement is always advisable when working surfaces must be particularly smooth and resistant.
GalvanizingHot-galvanized sheet metal is chosen specially for outdoor use under varying weather conditions. This ensures maximum corrosion protection and a long service life at only moderate additional cost.
Stainless steelStainless steel sheets are given preference in the food industry. In addition, stainless steel is recom-mended for handling particularly corrosive pro-ducts such as e. g. fertilizers or salts.
Processing technologycleaning machines, seed selector and ultratrieurs
Drying Cooling
34 3535
Many years of experience and continuous deve-lopment work are the basis for high-quality and high-performance products. Handling and con-veying systems made by Schmidt-Seeger are eco-nomically advantageous and effective.The product-specific design of the handling equip-ment guarantees the delivery rates demanded by the customers while ensuring optimum product protection and low reject rates.The use of state-of-the-art manufacturing tech-nologies such as e. g. welding robots, combined
with the use of high-quality, wear-resistant ma-terials ensure long service life. Sophisticated yet uncomplicated designs ensure fast and easy ma-chine assembly and smooth replacement of com-ponents if needed.Safe operation of our machines and plants is our number-one priority. Control mechanisms like run-out monitors, electronic rev meters and in-tegrated reversing locks help prevent accidents. All our designs are explosion-proof in accordance with the ATEX explosion safety directive.
Our experience for your success
Schmidt-Seeger GmbH
92339 Beilngries / Germany, Eichstaetter Strasse 49 Telephone ++49 (0) 8461 70 10, Fax ++49 (0) 8461 70 11 33
73655 Pluederhausen / Germany, Boschstrasse 7Telephone ++49 (0) 7181 80 05 0, Fax ++49 (0) 7181 80 05 50
04720 Doebeln / Germany, Richard-Koeberlin-Strasse 13Telephone ++49 (0) 3431 7 04 50, Fax ++49 (0) 3431 70 45 12
Rauc
hbau
er u
nd P
artn
er W
erbe
agen
tur
Gm
bHVe
rsio
n 10
/200
8
